{"title":"Axles","description":"\u003cp\u003eRacing axles and axle hardware from LighTech and Feel Racing — lightweight ergal and titanium components that cut unsprung mass exactly where the chassis feels it most.\u003c\/p\u003e\u003cp\u003eLighter axles reduce unsprung weight and improve suspension response; race-style quick-release designs speed up wheel changes between sessions. Every axle is machined for a specific model and lists its bearing and spacer compatibility.\u003c\/p\u003e","products":[{"product_id":"melotti-racing-fast-action-front-wheel-axle-kit-ducati-panigale-v2-955-2020-2024-ba-ssp-du-2-20-kprar","title":"Melotti Racing Fast Action Front Wheel Axle Kit Ducati Panigale V2 955 (2020-2024) – BA-SSP.DU.2.20.KPRAR","description":"\u003cp\u003eThe Panigale V2 955, built since 2020, is Ducati's Supersport-class twin, and in the SSP600 category it races on a tight schedule where a wheel change in the pit lane has to happen in seconds rather than minutes. Melotti Racing developed the Fast Action Front Wheel Axle Kit for exactly that situation: a quick-thread axle that a mechanic can drive home with a power tool instead of winding a conventional nut and bolt by hand. Built to the FIM's technical regulations for the class and already used by leading Supersport World Championship teams, the kit, KPRAR.DU, fits the Panigale V2 955 and its Showa fork.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFast action front wheel axle kit for the Ducati Panigale V2 955, 2020 to 2024\u003c\/li\u003e\n\u003cli\u003eMelotti Racing part KPRAR.DU, built to FIM SSP600 regulations\u003c\/li\u003e\n\u003cli\u003eHigh-alloy steel axle with a quick thread and broaching for a power tool\u003c\/li\u003e\n\u003cli\u003eWrench with a 1\/2 inch fitting for the power tool included\u003c\/li\u003e\n\u003cli\u003eThreaded bushing in Ergal with a surface-hardening treatment\u003c\/li\u003e\n\u003cli\u003eLocking nut in Ergal, finished with black anodic oxidation\u003c\/li\u003e\n\u003cli\u003eRacing wheel spacers in Ergal with an extended ramp and asymmetric lip\u003c\/li\u003e\n\u003cli\u003eAxle protection sliders in Anticorodal with a low-drag profile\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConstruction and Material Quality\u003c\/h2\u003e\n\u003cp\u003eMelotti builds the axle itself from a highly alloyed steel, cut with a quick thread and a dedicated broaching so a power tool can drive it home instead of a mechanic turning it by hand. The kit ships with a wrench carrying a 1\/2 inch fitting for that same tool. A threaded bushing in Ergal, surface-hardened against wear, and a black anodised Ergal locking nut secure the assembly at the fork leg, while a pair of racing wheel spacers, also in Ergal and treated the same way, use an extended entry ramp and an asymmetric retaining lip to guide the wheel into place. Protection sliders machined from Anticorodal, shaped for a low aerodynamic profile, sit loosely on the axle ends.\u003c\/p\u003e\n\u003ch2\u003eChanging a Wheel Against the Clock\u003c\/h2\u003e\n\u003cp\u003eIn SSP600 racing, a pit stop for a wheel change is judged entirely on how many seconds it costs, and every part of the sequence is rehearsed until the mechanic's hands know the job without thinking about it. A quick-thread axle removes the slowest step in a conventional change, letting the tool drive the thread home in one continuous motion rather than several turns of a spanner, while the extended ramp on the wheel spacers takes the guesswork out of lining the wheel back up between the fork legs. None of this replaces practice, but it gives a well-drilled crew the hardware their technique deserves.\u003c\/p\u003e\n\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\n\u003cp\u003eMelotti's price list gives the KPRAR.DU kit for the Panigale V2 955 and for the V4, and our listing follows that for the V2 955 built from 2020 to 2024. The kit is designed around the Showa fork fitted to the base V2 955 and the standard V4; Melotti's own notes make clear it is not intended for the V4 S or V4 R, which use an Öhlins fork instead, so fitment on those variants is excluded.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eThis kit carries no ABE, no German parts certificate and no EC type-approval, from Melotti or from us. It is built for racing under FIM-style technical regulations and other closed-circuit use; riding a V2 955 fitted with it on German public roads without a documented entry is not permitted, and the organiser of any event sets its own rules.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eThe KPRAR.DU kit includes the quick-thread axle, the power-tool wrench, the threaded bushing, the locking nut, a pair of racing wheel spacers and a pair of axle protection sliders, all described by Melotti as part of the same package for the Panigale V2 955.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePart: Fast Action Front Wheel Axle Kit\u003c\/li\u003e\n\u003cli\u003ePart number: BA-SSP.DU.2.20.KPRAR\u003c\/li\u003e\n\u003cli\u003eFitment: Ducati Panigale V2 955 (2020-2024)\u003c\/li\u003e\n\u003cli\u003eRoad approval: None documented, track use only\u003c\/li\u003e\n\u003cli\u003eMade in: Italy (Castello di Brianza)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Melotti Racing","offers":[{"title":"Default Title","offer_id":53168758194442,"sku":"BA-SSP.DU.2.20.KPRAR","price":988.24,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/R.SSP.DU.2.20.PR_V4.png?v=1780813781"},{"product_id":"melotti-racing-fast-action-front-wheel-axle-kit-ducati-panigale-v4-2018-2026-ba-ssp-du-2-20-kprar","title":"Melotti Racing Fast Action Front Wheel Axle Kit Ducati Panigale V4 (2018-2026) – BA-SSP.DU.2.20.KPRAR","description":"\u003cp\u003eDucati's Panigale V4, on sale since 2018, shares its SSP600-derived front axle hardware with the smaller Panigale V2 955 wherever both carry the same Showa fork, and club riders running an endurance or relay-style race on either bike face the same problem: a standard axle takes too long to change under pressure. Melotti Racing's Fast Action Front Wheel Axle Kit, KPRAR.DU, was engineered first for the Supersport class and the V2 955, and the same kit is also listed for the base model here, letting its pit crew borrow a piece of hardware proven on the smaller bike.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFast action front wheel axle kit for the Ducati Panigale V4, 2018 to 2026\u003c\/li\u003e\n\u003cli\u003eMelotti Racing part KPRAR.DU, the same kit listed for the Panigale V2 955\u003c\/li\u003e\n\u003cli\u003eHigh-alloy steel axle with a quick thread, broached for a power tool\u003c\/li\u003e\n\u003cli\u003e1\/2 inch power-tool wrench supplied in the kit\u003c\/li\u003e\n\u003cli\u003eErgal threaded bushing with a surface-hardening treatment\u003c\/li\u003e\n\u003cli\u003eBlack anodised Ergal locking nut\u003c\/li\u003e\n\u003cli\u003eRacing wheel spacers in Ergal with an extended entry ramp\u003c\/li\u003e\n\u003cli\u003eAxle protection sliders in Anticorodal, shaped for low aerodynamic drag\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConstruction and Material Quality\u003c\/h2\u003e\n\u003cp\u003eThe axle at the centre of the KPRAR.DU kit is cut from highly alloyed steel with a quick thread and a broaching that lets a power tool drive it home, and Melotti supplies a dedicated wrench with a 1\/2 inch fitting for that tool. A threaded bushing in surface-hardened Ergal and a black-anodised Ergal locking nut hold the assembly together at the fork leg, while a pair of racing wheel spacers in the same Ergal use an extended ramp and an asymmetric lip to guide the wheel home. Protection sliders machined from Anticorodal, profiled for low aerodynamic impact, fit loosely over the axle ends to take the first hit in a fall.\u003c\/p\u003e\n\u003ch2\u003eBorrowing a Supersport Trick\u003c\/h2\u003e\n\u003cp\u003eA quick-release axle earns its keep wherever a wheel comes off and goes back on under time pressure, whether that is an SSP600 pit stop or a club endurance round on the bigger V4, where two or three riders share a bike and every minute spent swapping a wheel is a minute not spent on track. Fitting the same axle kit that Melotti built around the Supersport regulations gives its crew the same quick-thread advantage, provided the fork matches the one the kit was designed around, which is the detail that decides whether it is the right part for this particular V4.\u003c\/p\u003e\n\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\n\u003cp\u003eMelotti's price list names the KPRAR.DU kit for both the Panigale V2 955 and this model; our listing covers it across 2018 to 2026. Melotti's own notes restrict the kit to the Showa-fork version, the base bike; the V4 S and V4 R, which use an Öhlins fork, are specifically excluded and need a different front-end solution.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eNo ABE, German parts certificate or EC type-approval is held for this kit, by Melotti or by us. It is meant for racing and other closed-circuit use; using it on this bike on German public roads without a separate entry in the registration documents is not permitted, and each event follows its own organiser's technical rules.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eDelivery covers the quick-thread axle, the matching power-tool wrench, the threaded bushing, the locking nut, a pair of racing wheel spacers and a pair of axle protection sliders, the same set of parts Melotti lists for the kit on the Panigale V2 955.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePart: Fast Action Front Wheel Axle Kit\u003c\/li\u003e\n\u003cli\u003ePart number: BA-SSP.DU.2.20.KPRAR\u003c\/li\u003e\n\u003cli\u003eFitment: Ducati Panigale V4 (2018-2026)\u003c\/li\u003e\n\u003cli\u003eRoad approval: None documented, track use only\u003c\/li\u003e\n\u003cli\u003eMade in: Italy (Castello di Brianza)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Melotti Racing","offers":[{"title":"Default Title","offer_id":53168758423818,"sku":"BA-SSP.DU.2.20.KPRAR","price":988.24,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/R.SSP.DU.2.20.PR_V4_29e1ea4f-02d9-476a-b758-803a26ef66db.png?v=1780813785"},{"product_id":"feel-racing-ducati-corse-sbk-lightweight-rear-wheel-axle","title":"Feel Racing Ducati Corse SBK Lightweight Rear Wheel Axle – Ducati Panigale V2 955 (2020–2024) 81910861B","description":"\u003cp\u003eEvery gram shed from unsprung mass translates directly into sharper turn-in, faster corner exit and reduced rear-end inertia — and the Ducati Corse SBK Lightweight Rear Wheel Axle (part number 81910861B) delivers exactly that. Manufactured to Ducati Corse's racing standards and approximately 220 g lighter than the standard production axle (manufacturer's stated figure), this is the definitive rear-axle upgrade for Panigale V2 955 track and race builds.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eApproximately 220 g weight saving over the standard axle — direct reduction in unsprung and rotating mass at the rear wheel (manufacturer's stated figure)\u003c\/li\u003e\n\u003cli\u003eDucati Corse production quality, developed within the WorldSSP and SBK racing programmes\u003c\/li\u003e\n\u003cli\u003eEngineered to integrate with the full Ducati Corse lightweight rear-wheel package, including the light rear wheel hub (COD. 75620151B) and rear wheel (COD. 50212181AA)\u003c\/li\u003e\n\u003cli\u003ePurpose-built for trackday and race use where every component choice has a measurable effect on lap times\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePerformance on Track\u003c\/h2\u003e\u003cp\u003eReducing rotating and unsprung mass at the rear axle is one of the most effective mechanical modifications available to a track-focused Panigale V2 rider. Less mass spinning at the wheel means the suspension responds more quickly to surface changes, the chassis settles faster under braking and the engine expends less energy accelerating the drivetrain. The 81910861B brings those benefits in a single drop-in component, backed by the engineering rigour of the Ducati Corse SBK programme rather than aftermarket estimation.\u003c\/p\u003e\u003cp\u003eUsed alongside the lightweight rear hub (COD. 75620151B) and the corresponding rear wheel (COD. 50212181AA), this axle forms part of a coherent, factory-validated lightweight rear-end package — the kind of systematic approach that separates a properly built race machine from a collection of individual parts.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis axle is a direct-fit component for the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDucati Panigale V2 955 (2020, 2021, 2022, 2023, 2024)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eCompatible components within the Ducati Corse lightweight rear-wheel package:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRear wheel hub light (lightweight rear wheel hub) — COD. 75620151B\u003c\/li\u003e\n\u003cli\u003eRear wheel — COD. 50212181AA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eImportant Installation Note\u003c\/h2\u003e\u003cp\u003eThis is a racing component. Installation must be carried out with the correct torque settings and in strict accordance with the Ducati workshop manual and applicable motorsport regulations. After fitting, verify correct seating, play and retention before the motorcycle is used.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct\u003c\/th\u003e\n\u003ctd\u003eSBK Light Rear Wheel Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eDucati Corse\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003e81910861B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight Saving\u003c\/th\u003e\n\u003ctd\u003eapprox. −220 g vs. standard axle (manufacturer's stated figure)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntended Use\u003c\/th\u003e\n\u003ctd\u003eRacing \/ Trackday\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Parts\u003c\/th\u003e\n\u003ctd\u003eCOD. 75620151B, COD. 50212181AA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment\u003c\/th\u003e\n\u003ctd\u003eDucati Panigale V2 955 (2020–2024)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Feel Racing","offers":[{"title":"Default Title","offer_id":53169039966474,"sku":"81910861B","price":561.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/AchseSBKDucatiCorse.png?v=1780820011"},{"product_id":"feel-racing-lightweight-rear-wheel-axle","title":"Feel Racing Lightweight Rear Wheel Axle – Ducati Panigale V4 \/ V4 S \/ V4 R (2018–2024) 81910861B","description":"\u003cp\u003eWhen every gram at the wheel end matters, the Feel Racing lightweight rear wheel axle 81910861B is the kind of racing-grade component that defines a properly executed WorldSSP or SBK-style build on the Ducati Panigale V4, V4 S, and V4 R. Reducing unsprung and rotating mass at the swingarm end has a measurable effect on how the rear responds mid-corner and under hard acceleration, making this axle a logical choice for any track or race programme where the whole rear package — axle, hub, wheel — is being built to a lightweight specification.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRacing-programme lightweight rear wheel axle engineered for the Ducati Panigale V4 \/ V4 S \/ V4 R (2018–2024)\u003c\/li\u003e\n\u003cli\u003eReduces unsprung and rotating mass at the swingarm and rear wheel assembly\u003c\/li\u003e\n\u003cli\u003eDucati Corse manufacturing quality matched to the demands of circuit and competition use\u003c\/li\u003e\n\u003cli\u003eIdeal centrepiece of a complete rear-end lightweight build alongside complementary Ducati Corse components\u003c\/li\u003e\n\u003cli\u003ePart number 81910861B for precise identification and fitment verification\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePerformance on Track\u003c\/h2\u003e\u003cp\u003eIn a disciplined track or race setup, mass saved at the extremities of the motorcycle — particularly at the rear axle and wheel — pays dividends that chassis tuning alone cannot replicate. Lower rotating inertia allows the rear wheel to respond more immediately to throttle inputs and braking events, while reduced unsprung weight helps the suspension track surface irregularities with greater fidelity. This axle is catalogued specifically as the lightweight variant for the V4 platform under part number 81910861B and is designed to integrate seamlessly with other Ducati Corse lightweight rear components.\u003c\/p\u003e\u003ch2\u003eBuilding the Complete Rear Package\u003c\/h2\u003e\u003cp\u003eThis axle delivers its full potential when combined with a matching lightweight philosophy across the entire rear assembly. A popular pairing in competition-oriented builds is the Ducati Corse lightweight rear hub 75620151B, which works in concert with this axle to push the overall rear-end mass reduction as far as the rules and your budget allow. Whether you are building for WorldSSP homologation, open-class superbike competition, or an uncompromising trackday machine, this axle belongs on the specification sheet.\u003c\/p\u003e\u003ch2\u003eImportant Fitment Note\u003c\/h2\u003e\u003cp\u003eThis is a racing component. Installation must be carried out in accordance with Ducati workshop manual torque specifications and applicable motorsport regulations. After fitting, always verify correct seating, running clearance, and fastener retention before returning the machine to use.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale V4 (2018–2024)\u003c\/li\u003e\n\u003cli\u003eDucati Panigale V4 S (2018–2024)\u003c\/li\u003e\n\u003cli\u003eDucati Panigale V4 R (2018–2024)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e81910861B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eFeel Racing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eLightweight Rear Wheel Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntended Use\u003c\/td\u003e\n\u003ctd\u003eRacing \/ Trackday \/ WorldSSP-oriented build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eDucati Panigale V4 \/ V4 S \/ V4 R (2018–2024)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Feel Racing","offers":[{"title":"Default Title","offer_id":53169040064778,"sku":"81910861B","price":561.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/AchseSBKDucatiCorse_7a9a17e8-900a-4360-ae65-6c07221d9f5c.png?v=1780820017"},{"product_id":"melotti-racing-fast-action-front-wheel-axle-kit-yamaha-yzf-r9-2025-2026-kprar-ya-925","title":"Melotti Racing Fast Action Front Wheel Axle Kit Yamaha YZF-R9 (2025-2026) – KPRAR.YA.925","description":"\u003cp\u003eMelotti Racing developed the Fast Action Front Wheel Axle Kit for Supersport 600 competition and the leading teams racing the Yamaha YZF-R9 in Supersport championships now run it, a sign of how directly it answers the one job that matters most in a pit box during a wheel change: getting the front axle in and out as quickly as a power tool allows.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFast action front wheel axle kit for the Yamaha YZF-R9, 2025 onward\u003c\/li\u003e\n\u003cli\u003eMelotti part KPRAR.YA.925, built to FIM regulations\u003c\/li\u003e\n\u003cli\u003eAxle in highly alloyed steel, with a fast-thread profile and dedicated broaching for a power tool\u003c\/li\u003e\n\u003cli\u003e1\/2 inch drive key for the power tool included\u003c\/li\u003e\n\u003cli\u003eErgal threaded bushing with hardened surface treatment\u003c\/li\u003e\n\u003cli\u003eErgal lock nut, black anodised\u003c\/li\u003e\n\u003cli\u003eRacing wheel spacers in Ergal with an extended ramp and an asymmetric retaining lip\u003c\/li\u003e\n\u003cli\u003eAxle protectors in Anticorodal, low-drag profile, free-floating on the axle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConstruction and Material Quality\u003c\/h2\u003e\n\u003cp\u003eThe axle itself is made from highly alloyed steel and cut with a fast-thread profile together with broaching designed specifically for a power tool, so a mechanic can drive it in or out rather than turning it by hand against a conventional thread. Melotti supplies a 1\/2 inch drive key sized for that tool as part of the kit, along with an Ergal threaded bushing that has been surface-hardened and a black anodised Ergal lock nut. The racing wheel spacers, also in Ergal, carry an extended ramp and an asymmetric retaining lip, and the axle protectors are machined in Anticorodal with a low aerodynamic-impact profile, sitting loose on the axle rather than clamped to it.\u003c\/p\u003e\n\u003ch2\u003eBuilt for the Front of the Grid in Supersport\u003c\/h2\u003e\n\u003cp\u003eMelotti built this kit specifically for Supersport 600-style regulations and says it meets FIM requirements, which is also why the leading teams racing a YZF-R9 in Supersport competition have adopted it rather than a generic fast-release axle. The whole point of a fast axle is the weekend it is used on, not the showroom: during a race meeting, the ability to drive the axle in and out with a power tool instead of a hand wrench can be the difference between a wheel change finished inside a set pit-lane time and one that is not. Melotti recommends pairing the kit with its quick-change front fender support kit, since the two were designed to work together during the same wheel change.\u003c\/p\u003e\n\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\n\u003cp\u003eMelotti's own fitment for the KPRAR.YA.925 on the YZF-R9 starts at 2025, which this listing follows, and the identical axle, bushing and spacers carry across to the YZF-R1 from 2015 and the YZF-R6 from 2017. Order the KSPM.YA.217 fender kit alongside it for the same bike.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eNo ABE exists for the KPRAR.YA.925. It is supplied for racetrack and closed-circuit use, consistent with the Supersport competition it was developed for.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eOne KPRAR.YA.925 kit: steel fast-action axle, 1\/2 inch drive key, Ergal threaded bushing, Ergal lock nut, Ergal wheel spacers and Anticorodal axle protectors, for the Yamaha YZF-R9.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePart: Fast Action Front Wheel Axle Kit\u003c\/li\u003e\n\u003cli\u003ePart number: KPRAR.YA.925\u003c\/li\u003e\n\u003cli\u003eFitment: Yamaha YZF-R9 (2025-2026)\u003c\/li\u003e\n\u003cli\u003eRoad approval: None documented, track use only\u003c\/li\u003e\n\u003cli\u003eMade in: Italy (Castello di Brianza)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Melotti Racing","offers":[{"title":"Default Title","offer_id":53900508168458,"sku":"KPRAR.YA.925","price":890.12,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/36422_03.png?v=1791875616"},{"product_id":"melotti-racing-fast-action-front-wheel-axle-kit-yamaha-yzf-r1-2015-2026-kprar-ya-925","title":"Melotti Racing Fast Action Front Wheel Axle Kit Yamaha YZF-R1 (2015-2026) – KPRAR.YA.925","description":"\u003cp\u003eEndurance racing turns a front wheel change into a repeated event rather than a one-off, and on a Yamaha YZF-R1, built from 2015 onward, every second a mechanic spends threading a conventional axle by hand is a second the bike spends off the circuit during a long race. Melotti Racing's Fast Action Front Wheel Axle Kit, developed originally for Supersport 600 competition, answers that pressure with an axle driven in and out by a power tool instead.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFast action front wheel axle kit for the Yamaha YZF-R1, 2015 onward\u003c\/li\u003e\n\u003cli\u003eMelotti part KPRAR.YA.925, built to FIM regulations\u003c\/li\u003e\n\u003cli\u003eAxle in highly alloyed steel with a fast-thread profile and power-tool broaching\u003c\/li\u003e\n\u003cli\u003e1\/2 inch drive key for the power tool included\u003c\/li\u003e\n\u003cli\u003eSurface-hardened Ergal threaded bushing\u003c\/li\u003e\n\u003cli\u003eBlack anodised Ergal lock nut\u003c\/li\u003e\n\u003cli\u003eErgal racing wheel spacers with an extended ramp and asymmetric retaining lip\u003c\/li\u003e\n\u003cli\u003eAnticorodal axle protectors, low-drag profile, free-floating on the axle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConstruction and Material Quality\u003c\/h2\u003e\n\u003cp\u003eMelotti machines the axle of the KPRAR.YA.925 from highly alloyed steel, cut with a fast-thread profile and broached specifically for use with a power tool rather than a hand wrench, and includes the matching 1\/2 inch drive key in the kit. A surface-hardened Ergal threaded bushing and a black anodised Ergal lock nut complete the thread side, while the racing wheel spacers, also Ergal, use an extended ramp and asymmetric retaining lip to seat correctly during a fast reinstall. The axle protectors are shaped in Anticorodal with a low aerodynamic-impact profile and sit free on the axle rather than clamped.\u003c\/p\u003e\n\u003ch2\u003eEvery Pit Stop Counts Twice in a 24-Hour Race\u003c\/h2\u003e\n\u003cp\u003eIn an endurance event, a slow wheel change costs time twice over: once directly, in the seconds the bike spends stationary, and again indirectly, in the fatigue a crew carries into the next stop after fighting a stubborn axle under pressure. Built originally for Supersport 600 racing and FIM regulations, this kit lets a mechanic drive the YZF-R1's front axle with a power tool rather than threading it by hand, a difference that barely registers over one wheel change but adds up across the dozens an endurance race can demand. Melotti recommends pairing it with the quick-change front fender support kit, since the two were designed around the same pit stop.\u003c\/p\u003e\n\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\n\u003cp\u003eFor the YZF-R1, Melotti's fitment for the KPRAR.YA.925 runs from 2015, the range we list against, and the same steel axle and Ergal hardware are equally compatible with the YZF-R9 from 2025 and the YZF-R6 from 2017. If the fender support kit, the KSPM.YA.217, is not already fitted to the same bike, order both together.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eWe hold no ABE for the KPRAR.YA.925. It is supplied for racetrack and closed-circuit use, and endurance or sprint race organisers apply their own technical rules at a meeting.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eOne KPRAR.YA.925 kit: steel fast-action axle, 1\/2 inch drive key, Ergal threaded bushing, Ergal lock nut, Ergal wheel spacers and Anticorodal axle protectors, for the Yamaha YZF-R1.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePart: Fast Action Front Wheel Axle Kit\u003c\/li\u003e\n\u003cli\u003ePart number: KPRAR.YA.925\u003c\/li\u003e\n\u003cli\u003eFitment: Yamaha YZF-R1 (2015-2026)\u003c\/li\u003e\n\u003cli\u003eRoad approval: None documented, track use only\u003c\/li\u003e\n\u003cli\u003eMade in: Italy (Castello di Brianza)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Melotti Racing","offers":[{"title":"Default Title","offer_id":53900508528906,"sku":"KPRAR.YA.925","price":890.12,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/36422_03_f68136ee-0a63-417d-b07d-2cf7174574ad.png?v=1791875618"},{"product_id":"melotti-racing-fast-action-front-wheel-axle-kit-yamaha-yzf-r6-2017-2026-kprar-ya-925","title":"Melotti Racing Fast Action Front Wheel Axle Kit Yamaha YZF-R6 (2017-2026) – KPRAR.YA.925","description":"\u003cp\u003eSupersport 600 is the class Melotti Racing built the Fast Action Front Wheel Axle Kit for in the first place, and a Yamaha YZF-R6, built from 2017 onward, is about as close to that original brief as the KPRAR.YA.925 gets: an FIM-compliant axle that a mechanic drives in and out with a power tool instead of threading it by hand during a race-weekend wheel change.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFast action front wheel axle kit for the Yamaha YZF-R6, 2017 onward\u003c\/li\u003e\n\u003cli\u003eMelotti part KPRAR.YA.925, developed for Supersport 600 competition, built to FIM regulations\u003c\/li\u003e\n\u003cli\u003eAxle in highly alloyed steel with a fast-thread profile and power-tool broaching\u003c\/li\u003e\n\u003cli\u003e1\/2 inch drive key for the power tool included\u003c\/li\u003e\n\u003cli\u003eSurface-hardened Ergal threaded bushing\u003c\/li\u003e\n\u003cli\u003eBlack anodised Ergal lock nut\u003c\/li\u003e\n\u003cli\u003eErgal racing wheel spacers, extended ramp, asymmetric retaining lip\u003c\/li\u003e\n\u003cli\u003eAnticorodal axle protectors, low-drag profile, free-floating fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConstruction and Material Quality\u003c\/h2\u003e\n\u003cp\u003eThe axle at the centre of the KPRAR.YA.925 is cut from highly alloyed steel with a fast-thread profile and dedicated broaching for a power tool, supplied with its own 1\/2 inch drive key. A surface-hardened Ergal bushing and a black anodised Ergal lock nut handle the thread side, while the Ergal wheel spacers use an extended ramp with an asymmetric retaining lip to locate correctly during a quick reinstall, and the axle protectors in Anticorodal are shaped for low aerodynamic drag and sit free on the axle itself.\u003c\/p\u003e\n\u003ch2\u003eThe Class This Kit Was Built For\u003c\/h2\u003e\n\u003cp\u003eWhere the same part extends naturally to the YZF-R9 and the YZF-R1, the YZF-R6 sits at the centre of what Melotti had in mind when it developed the kit, since Supersport 600 racing is specifically the category the FIM-compliant design targets. For a team running a YZF-R6 in that class, the kit is less an upgrade bolted on afterwards and more a part of the base specification the category expects, which is also why Melotti recommends fitting it together with its quick-change front fender support kit rather than as a standalone item.\u003c\/p\u003e\n\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\n\u003cp\u003eMelotti's YZF-R6 fitment for the KPRAR.YA.925 begins in 2017, matching our listing, with the identical axle and hardware also compatible with the YZF-R9 from 2025 and the YZF-R1 from 2015. A complete quick-change front end means ordering the KSPM.YA.217 fender kit for the same bike too.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eNo ABE exists for the KPRAR.YA.925. It is supplied for racetrack and closed-circuit use, and Supersport-class organisers apply their own technical rules at a meeting.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eOne KPRAR.YA.925 kit: steel fast-action axle, 1\/2 inch drive key, Ergal threaded bushing, Ergal lock nut, Ergal wheel spacers and Anticorodal axle protectors, for the Yamaha YZF-R6.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePart: Fast Action Front Wheel Axle Kit\u003c\/li\u003e\n\u003cli\u003ePart number: KPRAR.YA.925\u003c\/li\u003e\n\u003cli\u003eFitment: Yamaha YZF-R6 (2017-2026)\u003c\/li\u003e\n\u003cli\u003eRoad approval: None documented, track use only\u003c\/li\u003e\n\u003cli\u003eMade in: Italy (Castello di Brianza)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Melotti Racing","offers":[{"title":"Default Title","offer_id":53900508692746,"sku":"KPRAR.YA.925","price":890.12,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/36422_03_8bf942f2-87a8-4ce1-b05c-75f5b70a2b4d.png?v=1791875618"},{"product_id":"melotti-racing-fork-foot-bush-ducati-panigale-v2-955-2020-2024-r-ssp-du-2-20-bp","title":"Melotti Racing Fork Foot Bush Ducati Panigale V2 955 (2020-2024) – R.SSP.DU.2.20.BP","description":"\u003cp\u003eMelotti's description of its Fast Action Front Wheel Axle Kit for the Ducati Panigale V2 955 includes a threaded bushing at the fork foot, made from Ergal and surface-hardened against the wear that a quick-release axle, used over and over at speed, puts on the threads around it. That bushing is also catalogued on its own as a Supersport spare part, under the code R.SSP.DU.2.20.BP, for this Panigale V2 955. Melotti's price list carries no separate description for the part by itself, only the general heading used for all of its V2 955 spares, so the detail below comes from the kit's own text rather than a dedicated entry.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFork foot bush for the Ducati Panigale V2 955, 2020 to 2024\u003c\/li\u003e\n\u003cli\u003eMelotti Racing part R.SSP.DU.2.20.BP, a Supersport spare part\u003c\/li\u003e\n\u003cli\u003eThreaded Ergal bushing, as described for the fast-action axle kit\u003c\/li\u003e\n\u003cli\u003eSurface-hardening treatment against repeated wear at the fork foot\u003c\/li\u003e\n\u003cli\u003eWorks together with the matching locking nut\u003c\/li\u003e\n\u003cli\u003eSold separately for a kit already in service\u003c\/li\u003e\n\u003cli\u003eListed only under a collective spare parts heading on the price list\u003c\/li\u003e\n\u003cli\u003eNo ABE for this part; for racing and closed-circuit use only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConstruction and Material Quality\u003c\/h2\u003e\n\u003cp\u003eOn the price list, R.SSP.DU.2.20.BP sits under the same collective heading as every other Supersport spare part Melotti sells for the V2 955, with no paragraph of its own. The maker's description of the complete axle kit, however, names a threaded bushing in Ergal, treated to harden its surface, among the kit's parts, built to sit at the fork foot where the quick-release axle passes through. We take this bush to be that same part, offered here on its own so a worn or damaged bushing can be replaced without buying the whole kit a second time.\u003c\/p\u003e\n\u003ch2\u003eA Small Bush With a Big Job\u003c\/h2\u003e\n\u003cp\u003eA bushing at the fork foot does not look like much on its own, but on a bike changing wheels several times a race weekend it carries the full load of the axle thread every time the wheel comes off and goes back on, and a worn bush is usually the first sign that something in the quick-release system needs attention. Because Melotti's price list gives us only the short collective heading rather than a full write-up for this part by itself, we say so plainly here, and we are glad to check specific fitment or wear questions against the kit's own description before you order.\u003c\/p\u003e\n\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\n\u003cp\u003eMelotti lists R.SSP.DU.2.20.BP as a Supersport spare part for the Panigale V2 955, matching our listing for the 2020 to 2024 model years. It belongs with Melotti's Fast Action Front Wheel Axle Kit for this bike, and nothing in the price list suggests it is used on any other model.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eMelotti holds no ABE for this part, and neither do we, nor a German parts certificate or an EC type-approval. It is a replacement component for racing and other closed-circuit use; the axle system it belongs to is not approved for German public roads without a documented entry, and any event follows its own organiser's rules.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eDelivery is the R.SSP.DU.2.20.BP bushing on its own. The matching locking nut, the axle and the rest of the kit are sold separately and are not part of this delivery.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePart: Fork Foot Bush\u003c\/li\u003e\n\u003cli\u003ePart number: R.SSP.DU.2.20.BP\u003c\/li\u003e\n\u003cli\u003eFitment: Ducati Panigale V2 955 (2020-2024)\u003c\/li\u003e\n\u003cli\u003eRoad approval: None documented, track use only\u003c\/li\u003e\n\u003cli\u003eMade in: Italy (Castello di Brianza)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Melotti Racing","offers":[{"title":"Default Title","offer_id":53900528976138,"sku":"R.SSP.DU.2.20.BP","price":125.43,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/r-ssp-du-2-20-bp-panigale-v2-955-platzhalter.png?v=1791819452"},{"product_id":"melotti-racing-fork-foot-bush-locking-nut-ducati-panigale-v2-955-2020-2024-r-ssp-du-2-20-db","title":"Melotti Racing Fork Foot Bush Locking Nut Ducati Panigale V2 955 (2020-2024) – R.SSP.DU.2.20.DB","description":"\u003cp\u003eThe fork foot bushing in Melotti's Fast Action Front Wheel Axle Kit for the Ducati Panigale V2 955 is held in place by a dedicated locking nut, made from Ergal and finished in black anodic oxidation, as described in the kit's own text. That nut is also sold on its own under the code R.SSP.DU.2.20.DB, as a Supersport spare part for this Panigale V2 955, for a team that needs to replace just the nut rather than the whole fork-foot assembly. Melotti's price list carries no separate paragraph for the nut by itself, only the general heading shared with its other V2 955 spares.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFork foot bush locking nut for the Ducati Panigale V2 955, 2020 to 2024\u003c\/li\u003e\n\u003cli\u003eMelotti Racing part R.SSP.DU.2.20.DB, a Supersport spare part\u003c\/li\u003e\n\u003cli\u003eErgal locking nut, as described for the fast-action axle kit\u003c\/li\u003e\n\u003cli\u003eBlack anodic oxidation finish\u003c\/li\u003e\n\u003cli\u003eSecures the threaded fork foot bush in place\u003c\/li\u003e\n\u003cli\u003eSold separately for a kit already in service\u003c\/li\u003e\n\u003cli\u003eListed only under a collective spare parts heading on the price list\u003c\/li\u003e\n\u003cli\u003eNo ABE for this nut; for racing and closed-circuit use only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConstruction and Material Quality\u003c\/h2\u003e\n\u003cp\u003eMelotti groups R.SSP.DU.2.20.DB under the same collective price list heading as every other Supersport spare it sells for the V2 955, without a dedicated description of its own. The kit description for the complete Fast Action Front Wheel Axle Kit, however, names a locking nut in Ergal, treated with black anodic oxidation, among its parts, and we take this spare to be that same nut. Its job within the system is straightforward: it holds the threaded fork foot bush under load once the quick-release axle is tightened, so the bush does not work loose through repeated changes over a race weekend.\u003c\/p\u003e\n\u003ch2\u003eKeeping the Fork Foot Bush in Place\u003c\/h2\u003e\n\u003cp\u003eA locking nut rarely gets much attention until it is missing or has worked loose, at which point the whole fork foot assembly it was holding together starts to move. Carrying a spare R.SSP.DU.2.20.DB in the pit box means a worn or dropped nut during a race weekend does not become a reason to park the bike. As with the related bush, Melotti's price list gives us only the short collective heading rather than a description of the nut on its own, and we are open about relying on the kit's own text for the material and finish; any fitment question is something we would rather check with you before you order.\u003c\/p\u003e\n\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\n\u003cp\u003eMelotti lists R.SSP.DU.2.20.DB as a Supersport spare part for the Panigale V2 955, matching our listing for 2020 to 2024. It belongs with the fork foot bush and the rest of Melotti's Fast Action Front Wheel Axle Kit for this model, and the price list gives no indication that it fits any other bike.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eNo ABE, German parts certificate or EC type-approval covers this nut, from Melotti or from us. It is a spare for a racing axle system meant for closed-circuit use; the system it belongs to is not approved for German public roads without a documented entry, and any event follows its organiser's own rules.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eDelivery is the R.SSP.DU.2.20.DB locking nut on its own. The fork foot bush it secures, and the rest of the axle kit, are sold separately and are not part of this delivery.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePart: Fork Foot Bush Locking Nut\u003c\/li\u003e\n\u003cli\u003ePart number: R.SSP.DU.2.20.DB\u003c\/li\u003e\n\u003cli\u003eFitment: Ducati Panigale V2 955 (2020-2024)\u003c\/li\u003e\n\u003cli\u003eRoad approval: None documented, track use only\u003c\/li\u003e\n\u003cli\u003eMade in: Italy (Castello di Brianza)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Melotti Racing","offers":[{"title":"Default Title","offer_id":53900529271050,"sku":"R.SSP.DU.2.20.DB","price":94.07,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/r-ssp-du-2-20-db-panigale-v2-955-platzhalter.png?v=1791819461"},{"product_id":"melotti-racing-racing-wheel-spacers-pair-ducati-panigale-v2-955-2020-2024-r-ssp-du-2-20-dr","title":"Melotti Racing Racing Wheel Spacers (Pair) Ducati Panigale V2 955 (2020-2024) – R.SSP.DU.2.20.DR","description":"\u003cp\u003eMelotti Racing built a new version of its racing wheel spacers for the Panigale V2 955 specifically for its own fast-action front axle, cutting around a tenth of the mass out of the previous design while keeping the hard-anodised Ergal construction that stands up to the constant rubbing contact with the dust seal during a season of pit stops. Sold as a pair under the code R.SSP.DU.2.20.DR, these spacers are used by leading teams racing in the SSP and WSSP championships on this Panigale V2 955, and they are not compatible with the bike's original wheel axle.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRacing wheel spacers, sold as a pair, for the Ducati Panigale V2 955, 2020 to 2024\u003c\/li\u003e\n\u003cli\u003eMelotti Racing part R.SSP.DU.2.20.DR\u003c\/li\u003e\n\u003cli\u003eUsed by leading teams in the SSP and WSSP championships\u003c\/li\u003e\n\u003cli\u003eNew version with a 10 percent reduction in mass\u003c\/li\u003e\n\u003cli\u003eMade from Ergal with a high-thickness hard anodic oxidation\u003c\/li\u003e\n\u003cli\u003eExtended entry ramp to ease fitting between the fork legs\u003c\/li\u003e\n\u003cli\u003eAsymmetric retaining lip to aid mounting and ensure retention\u003c\/li\u003e\n\u003cli\u003eNot usable with the bike's original wheel axle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConstruction and Material Quality\u003c\/h2\u003e\n\u003cp\u003eEach pair of R.SSP.DU.2.20.DR spacers is machined from Ergal and then treated with a hard anodic oxidation applied at high thickness, specifically to resist the wear that builds up where the spacer rubs continuously against the dust seal every time the wheel turns. The newer version of this part cuts roughly a tenth of the mass out of the design that came before it, without giving up that wear resistance. An extended entry ramp guides the wheel into position between the fork legs during a change, and an asymmetric retaining lip on the spacer helps it seat correctly and stay there once the axle is tightened down.\u003c\/p\u003e\n\u003ch2\u003eShaving Grams Off the Front Wheel\u003c\/h2\u003e\n\u003cp\u003eUnsprung mass at the front wheel matters more than the same weight almost anywhere else on a racing motorcycle, since every gram there has to be accelerated and decelerated by the fork on every bump and every corner. Melotti's decision to redesign these spacers around a 10 percent weight saving, rather than leaving a proven part unchanged, reflects that priority directly, and it is the kind of improvement a team running in the SSP or WSSP class notices over a full season rather than in a single lap. The trade-off is compatibility: these spacers only work with Melotti's own quick-release axle, not the bike's original one.\u003c\/p\u003e\n\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\n\u003cp\u003eMelotti's price list gives R.SSP.DU.2.20.DR for the Panigale V2 955 and for the Panigale V4, and our listing covers the V2 955 from 2020 to 2024. The spacers are built to work exclusively with Melotti's own Fast Action Front Wheel Axle Kit; Melotti states plainly that they cannot be used with the bike's factory wheel axle.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eThis part carries no ABE, no German parts certificate and no EC type-approval, from Melotti or from us. It is built for SSP and WSSP-style racing and other closed-circuit use; fitting it to a bike used on German public roads without a documented entry is not permitted, and race organisers set their own technical rules for any event.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eYou receive one pair of R.SSP.DU.2.20.DR wheel spacers. Melotti's quick-release axle itself, needed for these spacers to be used at all, is sold separately.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePart: Racing Wheel Spacers (Pair)\u003c\/li\u003e\n\u003cli\u003ePart number: R.SSP.DU.2.20.DR\u003c\/li\u003e\n\u003cli\u003eFitment: Ducati Panigale V2 955 (2020-2024)\u003c\/li\u003e\n\u003cli\u003eRoad approval: None documented, track use only\u003c\/li\u003e\n\u003cli\u003eMade in: Italy (Castello di Brianza)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Melotti Racing","offers":[{"title":"Default Title","offer_id":53900529434890,"sku":"R.SSP.DU.2.20.DR","price":104.18,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/35695_00.png?v=1791819471"},{"product_id":"melotti-racing-racing-wheel-spacers-pair-ducati-panigale-v4-2018-2026-r-ssp-du-2-20-dr","title":"Melotti Racing Racing Wheel Spacers (Pair) Ducati Panigale V4 (2018-2026) – R.SSP.DU.2.20.DR","description":"\u003cp\u003eThe same racing wheel spacers Melotti designed for the Panigale V2 955's fast-action axle are also listed for the base Panigale V4, since both bikes share the quick-release system that these spacers are built around. Sold as a pair under the code R.SSP.DU.2.20.DR, the spacers are built from Ergal and use an extended entry ramp and an asymmetric lip to help a mechanic get the wheel back into place quickly on this Panigale V4 during a pit stop, and like the matching axle kit, they replace parts of the original wheel assembly rather than bolting alongside it.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRacing wheel spacers, sold as a pair, for the Ducati Panigale V4, 2018 to 2026\u003c\/li\u003e\n\u003cli\u003eMelotti Racing part R.SSP.DU.2.20.DR, the same part listed for the V2 955\u003c\/li\u003e\n\u003cli\u003eMade from Ergal with a high-thickness hard anodic oxidation\u003c\/li\u003e\n\u003cli\u003eNew version with a 10 percent reduction in mass over the previous design\u003c\/li\u003e\n\u003cli\u003eExtended entry ramp to ease fitting between the fork legs\u003c\/li\u003e\n\u003cli\u003eAsymmetric retaining lip to aid mounting and ensure retention\u003c\/li\u003e\n\u003cli\u003eUsed by leading teams in SSP and WSSP-level competition\u003c\/li\u003e\n\u003cli\u003eNot usable with the bike's original wheel axle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConstruction and Material Quality\u003c\/h2\u003e\n\u003cp\u003eR.SSP.DU.2.20.DR is machined from Ergal and finished with a hard anodic oxidation applied at high thickness, built to resist the wear that comes from the spacer rubbing continuously against the dust seal every time the wheel turns. This current version cuts about a tenth of the mass out of the spacer that came before it. An extended ramp eases the wheel into position between the fork legs as it goes back on, and an asymmetric retaining lip helps the spacer seat correctly and hold its position once the axle is tightened. Melotti is explicit that the spacers will not work with the standard factory axle.\u003c\/p\u003e\n\u003ch2\u003eSpacers Built for One Axle Only\u003c\/h2\u003e\n\u003cp\u003eFitting these spacers on a V4 only makes sense alongside Melotti's own Fast Action Front Wheel Axle Kit, since the two parts are designed as a pair rather than as independent upgrades; the wheel simply will not locate correctly between the fork legs using the standard axle once these spacers are installed. For a mechanic used to the factory wheel assembly, that is the detail worth remembering before ordering: this is not a drop-in lightweight spacer for a stock front end, but one component of a complete quick-change system built for racing.\u003c\/p\u003e\n\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\n\u003cp\u003eMelotti's price list gives R.SSP.DU.2.20.DR for the Panigale V4 and for the Panigale V2 955; our listing covers the V4 from 2018 to 2026. The spacers are built to work with Melotti's Fast Action Front Wheel Axle Kit for the Showa-fork version of the bike, and Melotti states that they cannot be used with the factory wheel axle.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eNo ABE, German parts certificate or EC type-approval exists for this part, from Melotti or from us. It is built for SSP and WSSP-style racing and other closed-circuit use; riding a bike fitted with it on German public roads without a documented entry is not permitted, and race organisers set their own technical rules for any event.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eDelivery is one pair of R.SSP.DU.2.20.DR wheel spacers. Melotti's quick-release axle kit, required for these spacers to function, is sold separately.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePart: Racing Wheel Spacers (Pair)\u003c\/li\u003e\n\u003cli\u003ePart number: R.SSP.DU.2.20.DR\u003c\/li\u003e\n\u003cli\u003eFitment: Ducati Panigale V4 (2018-2026)\u003c\/li\u003e\n\u003cli\u003eRoad approval: None documented, track use only\u003c\/li\u003e\n\u003cli\u003eMade in: Italy (Castello di Brianza)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Melotti Racing","offers":[{"title":"Default Title","offer_id":53900530123018,"sku":"R.SSP.DU.2.20.DR","price":104.18,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/35695_00_aaac7ca9-07c5-42f1-97d7-43575d27045f.png?v=1791819480"},{"product_id":"melotti-racing-fast-action-front-wheel-axle-ducati-panigale-v2-955-2020-2024-r-ssp-du-2-20-pr","title":"Melotti Racing Fast Action Front Wheel Axle Ducati Panigale V2 955 (2020-2024) – R.SSP.DU.2.20.PR","description":"\u003cp\u003eEvery pit stop on a Panigale V2 955 running Melotti's quick-release front axle puts its full load through one single component: the axle itself, a highly alloyed steel shaft cut with a quick thread and a dedicated broaching so a power tool can drive it home in one motion. That axle is sold on its own under the code R.SSP.DU.2.20.PR, and of the whole quick-release system it is the part that sees the most direct, repeated stress, which makes it the one most likely to need a fresh replacement after a full season of fast changes.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFast action front wheel axle for the Ducati Panigale V2 955, 2020 to 2024\u003c\/li\u003e\n\u003cli\u003eMelotti Racing part R.SSP.DU.2.20.PR, a Supersport spare part\u003c\/li\u003e\n\u003cli\u003eHigh-alloy steel, as described for the complete axle kit\u003c\/li\u003e\n\u003cli\u003eQuick thread with dedicated broaching for a power tool\u003c\/li\u003e\n\u003cli\u003eSold on its own, separate from the wrench, bushing and nut\u003c\/li\u003e\n\u003cli\u003eReplaces the factory front wheel axle\u003c\/li\u003e\n\u003cli\u003eListed only under a collective spare parts heading on the price list\u003c\/li\u003e\n\u003cli\u003eNo ABE for this part; for racing and closed-circuit use only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConstruction and Material Quality\u003c\/h2\u003e\n\u003cp\u003eOn the price list, this axle carries only a short collective heading shared with every other Supersport spare Melotti sells for the V2 955, with no separate write-up of its own. Looking instead at how Melotti describes the full Fast Action Front Wheel Axle Kit, the steel at its core is called out as highly alloyed, cut with a quick thread and a dedicated broaching built for a power tool rather than a hand-turned nut, and that is the axle sold here on its own. Buying it separately means a team can renew the axle alone, leaving the wrench, the bushing and the locking nut untouched if they are still in good order.\u003c\/p\u003e\n\u003ch2\u003eReplacing Only the Axle\u003c\/h2\u003e\n\u003cp\u003eA quick thread hammered home by a power tool dozens of times over a weekend ages faster than one a mechanic turns gently by hand, and the axle tends to show that wear before anything else in the system does. Having a spare R.SSP.DU.2.20.PR ready in the pit box turns a worn thread from a weekend-ending problem into a five-minute swap. We should say plainly that Melotti's own price list stops at the short collective heading for this axle rather than giving it a write-up of its own, so we have built the picture above from the full kit's description, and we would rather confirm a specific fitment question with you than guess at it.\u003c\/p\u003e\n\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\n\u003cp\u003eOur listing for R.SSP.DU.2.20.PR follows Melotti's own Supersport price list, covering the Panigale V2 955 from 2020 to 2024. It is the axle fitted inside Melotti's Fast Action Front Wheel Axle Kit for this particular bike, and nothing in the price list suggests the same axle is offered for any other model as a standalone part.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eNo ABE, German parts certificate or EC type-approval covers this axle, from Melotti or from us. It is a racing spare part meant for closed-circuit use; a bike fitted with it is not approved for German public roads without a documented entry, and any event you enter follows its own organiser's technical rules.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eDelivery is the R.SSP.DU.2.20.PR axle on its own. The wrench, the threaded bushing, the locking nut and the wheel spacers that complete the kit are sold separately.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePart: Fast Action Front Wheel Axle\u003c\/li\u003e\n\u003cli\u003ePart number: R.SSP.DU.2.20.PR\u003c\/li\u003e\n\u003cli\u003eFitment: Ducati Panigale V2 955 (2020-2024)\u003c\/li\u003e\n\u003cli\u003eRoad approval: None documented, track use only\u003c\/li\u003e\n\u003cli\u003eMade in: Italy (Castello di Brianza)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Melotti Racing","offers":[{"title":"Default Title","offer_id":53900535464202,"sku":"R.SSP.DU.2.20.PR","price":712.1,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/r-ssp-du-2-20-pr-panigale-v2-955-platzhalter.png?v=1791819496"},{"product_id":"accossato-offroad-rear-wheel-spacers-suzuki-rm-z-250-2007-2018-dss02","title":"Accossato Offroad Rear Wheel Spacers Suzuki RM-Z 250 (2007-2018) – DSS02","description":"\u003cp\u003eThe Suzuki RM-Z 250 is a four-stroke motocross bike that sees its rear wheel off far more often than most machines, whether that is for a quick tyre change between motos or routine chain and sprocket work. Accossato lists its Offroad Rear Wheel Spacer, known in Italy as the Distanziali ruota posteriore, for the RM-Z 250 built from 2007 to 2018, in blue, silver or gold, sitting either side of the rear hub on the rear axle.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRear wheel spacers for the Suzuki RM-Z 250, model years 2007 to 2018\u003c\/li\u003e\n\u003cli\u003eAccossato code DSS02, a pair fitted left and right of the rear hub\u003c\/li\u003e\n\u003cli\u003eAvailable in blue, silver or gold\u003c\/li\u003e\n\u003cli\u003eSit on the rear axle, between the hub and the swingarm, holding the wheel laterally\u003c\/li\u003e\n\u003cli\u003eSame part also listed by Accossato for the Suzuki RM-Z 450\u003c\/li\u003e\n\u003cli\u003eAccossato also offers the LC021 launch control fork holder for this bike\u003c\/li\u003e\n\u003cli\u003eNo German ABE on file; built for off-road and competition use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConstruction and Material Quality\u003c\/h2\u003e\u003cp\u003eBeyond the vehicle and the build years, what Accossato confirms for the DSS02 is the choice of blue, silver or gold; it does not publish a material or a size for the spacers themselves. Blue, silver and gold are simply three colour options; none changes how the spacers hold the wheel in place. A spacer that has been dropped, bent, or chewed up by a slipping wrench should be replaced rather than refitted.\u003c\/p\u003e\n\u003ch2\u003eWheel Changes in the Pit Box\u003c\/h2\u003e\u003cp\u003eA rear wheel change on the RM-Z 250 is a routine job in any pit box, done between motos to fit a fresh tyre or simply to get at the chain and sprockets, and the two spacers are easy to lose in the process. Pulling the axle lets both spacers drop straight out, and in the rush of a short break between races they can end up kicked under a pit mat or left sitting in the grass. Keeping track of which spacer came off which side matters too, since mixing them up during a rushed wheel change is an easy slip to make under time pressure. Once the wheel is back in, the spacers should sit square against the hub before the axle is tightened, and the seals behind them are worth a glance while everything is apart. A mechanic working through several bikes in one pit box often keeps a spare pair of spacers on hand for exactly this reason, so a lost one does not end a session early.\u003c\/p\u003e\n\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eFor the RM-Z 250, Accossato's listing covers the DSS02 across the 2007 to 2018 run shown here, and the identical spacer set reappears under the RM-Z 450 further along Accossato's range. Riders who also want the LC021 holeshot device will find it listed for this same bike. Confirming the RM-Z 250's build year against Accossato's application list is worth the extra minute before ordering.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\u003cp\u003eNo German ABE is on file for the DSS02, so Accossato lists it for off-road and competition use only; it is not intended for road-registered motorcycles.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\u003cp\u003eSupplied as a pair of rear wheel spacers, left and right, as shown in the product photo, in the colour selected.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: Off-road rear wheel spacers\u003c\/li\u003e\n\u003cli\u003ePart number: DSS02\u003c\/li\u003e\n\u003cli\u003eColours: Silver, blue, gold\u003c\/li\u003e\n\u003cli\u003eUse: Off-road (enduro, motocross)\u003c\/li\u003e\n\u003cli\u003eFitment: Suzuki RM-Z 250 (2007–2018)\u003c\/li\u003e\n\u003cli\u003eCheck: Compare with the application list before ordering\u003c\/li\u003e\n\u003cli\u003eRoad approval: None documented, off-road and competition use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Accossato","offers":[{"title":"Silver","offer_id":53900664111370,"sku":"DSS02T","price":31.46,"currency_code":"EUR","in_stock":true},{"title":"Blue","offer_id":53900664340746,"sku":"DSS02B","price":31.46,"currency_code":"EUR","in_stock":true},{"title":"Gold","offer_id":53900664373514,"sku":"DSS02Y","price":31.46,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/DSS02_silver.png?v=1791822031"},{"product_id":"accossato-offroad-rear-wheel-spacers-suzuki-rm-z-450-2007-2018-dss02","title":"Accossato Offroad Rear Wheel Spacers Suzuki RM-Z 450 (2007-2018) – DSS02","description":"\u003cp\u003eThe Suzuki RM-Z 450 is the brand's full-size motocross machine. Accossato lists its Offroad Rear Wheel Spacer, known in Italy as the Distanziali ruota posteriore, for the RM-Z 450 built from 2007 to 2018, in blue, silver or gold, sitting either side of the rear hub on the rear axle; Accossato also lists the RMX 450 (2010 to 2012) for the same part.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRear wheel spacers for the Suzuki RM-Z 450, model years 2007 to 2018\u003c\/li\u003e\n\u003cli\u003eAccossato code DSS02, a pair fitted left and right of the rear hub\u003c\/li\u003e\n\u003cli\u003eAvailable in blue, silver or gold\u003c\/li\u003e\n\u003cli\u003eAlso listed by Accossato for the Suzuki RMX 450, built 2010 to 2012\u003c\/li\u003e\n\u003cli\u003eSame part also listed by Accossato for the Suzuki RM-Z 250\u003c\/li\u003e\n\u003cli\u003eAccossato also offers the LC021 launch control fork holder for this bike\u003c\/li\u003e\n\u003cli\u003eNo German ABE on file; built for off-road and competition use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConstruction and Material Quality\u003c\/h2\u003e\u003cp\u003eAccossato ties the DSS02 to both the RM-Z 450 and the related RMX 450 by vehicle and build years rather than by any stated material or measurement, leaving the colour as the only other detail given. Blue, silver and gold are simply colour options; none of them changes how the spacers hold the wheel in place. A spacer that has been bent, chewed up by a slipping wrench, or dropped and lost in long grass should be replaced rather than reused.\u003c\/p\u003e\n\u003ch2\u003eA Second Life as an RMX 450\u003c\/h2\u003e\u003cp\u003eAccossato lists the DSS02 spacer set against both the RM-Z 450 and the RMX 450, covering the RMX 450's shorter production run from 2010 to 2012 as well. An owner who has moved a motocross RM-Z 450 onto trail duty, or who runs an RMX 450 alongside a motocross bike, can treat the two listings as covering the same spacer set rather than hunting for a part listed only under the enduro name. That shared listing also means a spare pair kept for one bike is listed as fitting the other too, which is useful for anyone running both models through the same season. The colour choice has no bearing on which bike the spacers go on; it is simply a question of what the owner prefers to see at the rear hub.\u003c\/p\u003e\n\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eAccossato's application list places the DSS02 against the RM-Z 450 for 2007 to 2018, matching what is shown here, and against the shorter-lived RMX 450 for 2010 to 2012. The RM-Z 250 takes the identical spacer set as well. A rider who also wants a holeshot device for this bike will find the LC021 listed alongside it. Checking the precise build year before ordering is still worth doing, given how long this model has run.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\u003cp\u003eNo German ABE is on file for the DSS02, so Accossato lists it for off-road and competition use only; it is not intended for road-registered motorcycles.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\u003cp\u003eSupplied as a pair of rear wheel spacers, left and right, as shown in the product photo, in the colour selected.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: Off-road rear wheel spacers\u003c\/li\u003e\n\u003cli\u003ePart number: DSS02\u003c\/li\u003e\n\u003cli\u003eColours: Silver, blue, gold\u003c\/li\u003e\n\u003cli\u003eUse: Off-road (enduro, motocross)\u003c\/li\u003e\n\u003cli\u003eFitment: Suzuki RM-Z 450 (2007–2018)\u003c\/li\u003e\n\u003cli\u003eCheck: Compare with the application list before ordering\u003c\/li\u003e\n\u003cli\u003eRoad approval: None documented, off-road and competition use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Accossato","offers":[{"title":"Silver","offer_id":53900664537354,"sku":"DSS02T","price":31.46,"currency_code":"EUR","in_stock":true},{"title":"Blue","offer_id":53900664602890,"sku":"DSS02B","price":31.46,"currency_code":"EUR","in_stock":true},{"title":"Gold","offer_id":53900664635658,"sku":"DSS02Y","price":31.46,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/DSS02_silver_9a050c94-0535-4816-b858-96da4d32d068.png?v=1791822050"},{"product_id":"accossato-offroad-rear-wheel-spacers-suzuki-rm85-2002-2015-dss03","title":"Accossato Offroad Rear Wheel Spacers Suzuki RM85 (2002-2015) – DSS03","description":"\u003cp\u003eThe Suzuki RM85 is a two-stroke built for junior motocross, sized for a young rider still learning race craft, and a bike this size still has its rear wheel off and on through a typical season. Accossato lists its Offroad Rear Wheel Spacer, known in Italy as the Distanziali ruota posteriore, for the RM85 built from 2002 to 2015, in silver or gold, sitting either side of the rear hub on the rear axle.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRear wheel spacers for the Suzuki RM85, model years 2002 to 2015\u003c\/li\u003e\n\u003cli\u003eAccossato code DSS03, a pair fitted left and right of the rear hub\u003c\/li\u003e\n\u003cli\u003eAvailable in silver or gold\u003c\/li\u003e\n\u003cli\u003eSit on the rear axle, between the hub and the swingarm, holding the wheel laterally\u003c\/li\u003e\n\u003cli\u003eAccossato also offers the LC008 launch control fork holder for this bike\u003c\/li\u003e\n\u003cli\u003eNo German ABE on file; built for off-road and competition use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConstruction and Material Quality\u003c\/h2\u003e\u003cp\u003eEach spacer sits on its own side of the rear axle between the hub and the swingarm, and the RM85's own build is still worth checking against the application list before ordering. Silver and gold are simply two colour options; neither changes how the spacers hold the wheel in place. A spacer that has gone missing after a wheel change, or one that has been bent by a slipping wrench, needs replacing rather than forcing back in.\u003c\/p\u003e\n\u003ch2\u003eKeeping a Junior Racer's Spares Ready\u003c\/h2\u003e\u003cp\u003eA young rider's RM85 tends to go through more wheel-off jobs than its size would suggest, between learning basic chain maintenance, swapping a worn tyre, and the occasional parent or mechanic double-checking the rear end after a weekend of racing. Spacers on a bike this small are no less easy to misplace than on a full-size machine; if anything, they are easier to lose simply because fewer hands are doing the work and the job is often rushed between sessions at a club meeting. Keeping a spare pair of DSS03 spacers in the toolbox, rather than discovering a missing one on the morning of a race, avoids a last-minute scramble through the pit area asking other families for a spare part. Whoever does the wheel on a junior bike is worth reminding to note which spacer came off which side, since a young rider helping out is unlikely to notice if they end up swapped.\u003c\/p\u003e\n\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eAccossato's application list runs the DSS03 against the RM85 for 2002 to 2015, matching the years given here. No other Suzuki model is listed against this code elsewhere in Accossato's range. Riders fitting out this bike can also find the LC008 launch control fork holder listed for the same machine. It is worth checking the RM85's own build year against the list before ordering, since junior bikes of this age are often bought and sold several times over.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\u003cp\u003eNo German ABE is on file for the DSS03, so Accossato lists it for off-road and competition use only; it is not intended for road-registered motorcycles.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\u003cp\u003eSupplied as a pair of rear wheel spacers, left and right, as shown in the product photo, in the colour selected.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: Off-road rear wheel spacers\u003c\/li\u003e\n\u003cli\u003ePart number: DSS03\u003c\/li\u003e\n\u003cli\u003eColours: Silver, gold\u003c\/li\u003e\n\u003cli\u003eUse: Off-road (enduro, motocross)\u003c\/li\u003e\n\u003cli\u003eFitment: Suzuki RM85 (2002–2015)\u003c\/li\u003e\n\u003cli\u003eCheck: Compare with the application list before ordering\u003c\/li\u003e\n\u003cli\u003eRoad approval: None documented, off-road and competition use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Accossato","offers":[{"title":"Silver","offer_id":53900664897802,"sku":"DSS03T","price":31.46,"currency_code":"EUR","in_stock":true},{"title":"Gold","offer_id":53900664930570,"sku":"DSS03Y","price":31.46,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/DSS03_silver.png?v=1791822071"},{"product_id":"accossato-offroad-rear-wheel-spacers-yamaha-wr250f-2006-2020-dsy01","title":"Accossato Offroad Rear Wheel Spacers Yamaha WR250F (2006-2020) – DSY01","description":"\u003cp\u003eThe Yamaha WR250F spends its weekends on trails that do not stay dry for long, and a rear wheel change out on the loop, rather than back at the van, is a fairly normal part of owning one. Accossato lists its Offroad Rear Wheel Spacer, known in Italy as the Distanziali ruota posteriore, for the WR250F built from 2006 to 2020, in blue or silver, sitting either side of the rear hub on the rear axle.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRear wheel spacers for the Yamaha WR250F, model years 2006 to 2020\u003c\/li\u003e\n\u003cli\u003eAccossato code DSY01, a pair fitted left and right of the rear hub\u003c\/li\u003e\n\u003cli\u003eAvailable in blue or silver\u003c\/li\u003e\n\u003cli\u003eSit on the rear axle, between the hub and the swingarm, holding the wheel laterally\u003c\/li\u003e\n\u003cli\u003eSame part also listed by Accossato for the Yamaha WR450F, YZ125 and YZ250\u003c\/li\u003e\n\u003cli\u003eNo German ABE on file; built for off-road and competition use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConstruction and Material Quality\u003c\/h2\u003e\u003cp\u003eThe WR250F is one of several bikes Accossato names for the DSY01, alongside the build years and the colour choice; no material or dimension is stated for the spacers, and the identical listing covers the WR450F, the YZ125 and the YZ250 too. Blue and silver are simply colour options; neither changes how the spacers hold the wheel in place. A spacer that comes back from a trail ride scraped, bent, or missing altogether should be replaced rather than reused.\u003c\/p\u003e\n\u003ch2\u003eA Spacer Lost in the Mud\u003c\/h2\u003e\u003cp\u003eA rear wheel coming off beside a muddy trail is not the cleanest job, and the two spacers that drop free as soon as the axle slides out are small enough to disappear into wet leaves or soft ground in seconds. A rider changing a tyre or clearing a clogged chain far from the van has to work carefully, setting each spacer somewhere it can be seen rather than balanced on a boot or laid in the grass, because retracing steps to find a lost one afterwards is rarely practical once the light is fading. Carrying a spare pair in the tool roll for exactly this situation means a lost spacer costs a few minutes rather than ending the ride early, and it also covers the case of a spacer that has simply worn thin after a long, wet season on the WR250F.\u003c\/p\u003e\n\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eAccossato lists the DSY01 for the WR250F across 2006 to 2020, matching the years here, and the identical part is shared with the WR450F, the YZ125 and the YZ250, reflecting how much of the rear end these Yamaha models have in common. Anyone running more than one of these bikes can treat a spare pair of spacers as useful across the whole garage. As with any part spanning this many model years, checking the WR250F's own build date against the application list before ordering is still worthwhile.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\u003cp\u003eNo German ABE is on file for the DSY01, so Accossato lists it for off-road and competition use only; it is not intended for road-registered motorcycles.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\u003cp\u003eSupplied as a pair of rear wheel spacers, left and right, as shown in the product photo, in the colour selected.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: Off-road rear wheel spacers\u003c\/li\u003e\n\u003cli\u003ePart number: DSY01\u003c\/li\u003e\n\u003cli\u003eColours: Silver, blue\u003c\/li\u003e\n\u003cli\u003eUse: Off-road (enduro, motocross)\u003c\/li\u003e\n\u003cli\u003eFitment: Yamaha WR250F (2006–2020)\u003c\/li\u003e\n\u003cli\u003eCheck: Compare with the application list before ordering\u003c\/li\u003e\n\u003cli\u003eRoad approval: None documented, off-road and competition use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Accossato","offers":[{"title":"Silver","offer_id":53900665585930,"sku":"DSY01T","price":31.46,"currency_code":"EUR","in_stock":true},{"title":"Blue","offer_id":53900665684234,"sku":"DSY01B","price":31.46,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/DSY01_silver.png?v=1791822093"},{"product_id":"accossato-offroad-rear-wheel-spacers-yamaha-wr450f-2006-2020-dsy01","title":"Accossato Offroad Rear Wheel Spacers Yamaha WR450F (2006-2020) – DSY01","description":"\u003cp\u003eRiders getting a Yamaha WR450F ready for a new season tend to work through the rear end as part of the job, and the two small spacers either side of the rear hub are easy to overlook until a wheel is off the bike. Accossato lists its Offroad Rear Wheel Spacer, known in Italy as the Distanziali ruota posteriore, for the WR450F built from 2006 to 2020, in blue or silver, sitting either side of the rear hub on the rear axle.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRear wheel spacers for the Yamaha WR450F, model years 2006 to 2020\u003c\/li\u003e\n\u003cli\u003eAccossato code DSY01, a pair fitted left and right of the rear hub\u003c\/li\u003e\n\u003cli\u003eAvailable in blue or silver\u003c\/li\u003e\n\u003cli\u003eSit on the rear axle, between the hub and the swingarm, holding the wheel laterally\u003c\/li\u003e\n\u003cli\u003eSame part also listed by Accossato for the Yamaha WR250F, YZ125 and YZ250\u003c\/li\u003e\n\u003cli\u003eNo German ABE on file; built for off-road and competition use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConstruction and Material Quality\u003c\/h2\u003e\u003cp\u003eAccossato names the WR450F among the bikes the DSY01 fits, together with the build years and the colour choice, without stating a material or a dimension for the spacers; the same part turns up again for the WR250F, the YZ125 and the YZ250. Blue and silver are colour options only; they have no bearing on how firmly the spacers hold the wheel. A spacer that has picked up a dent or gone noticeably out of shape over a season of riding is worth replacing before it is trusted again.\u003c\/p\u003e\n\u003ch2\u003eGetting the Bike Ready for a New Season\u003c\/h2\u003e\u003cp\u003eA pre-season check on the WR450F usually means pulling the rear wheel at some point, whether to inspect the chain and sprockets, clean up the swingarm area, or simply to grease and refit everything properly before the riding starts again in earnest. That is also the moment to look over the two rear wheel spacers, since a season spent sitting in a shed or stored outside can leave them corroded, seized to the axle, or simply misplaced since the last time the bike was apart. Riders doing this kind of once-a-year strip-down often replace both spacers as a matter of course rather than waiting for one to fail mid-ride, treating them the same way as a fresh set of seals or bearings while the wheel is already out. Fitting new spacers at this stage also means there is no surprise part needed halfway through the first proper ride of the year.\u003c\/p\u003e\n\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eAccossato's listing runs the DSY01 against the WR450F for 2006 to 2020, matching the years shown here, with the identical spacer covering the WR250F, the YZ125 and the YZ250 as well. A rider with more than one of these bikes effectively shares one spares bin for this part. Checking the WR450F's actual build date against the application list is still a sensible step given the length of this run.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\u003cp\u003eNo German ABE is on file for the DSY01, so Accossato lists it for off-road and competition use only; it is not intended for road-registered motorcycles.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\u003cp\u003eSupplied as a pair of rear wheel spacers, left and right, as shown in the product photo, in the colour selected.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: Off-road rear wheel spacers\u003c\/li\u003e\n\u003cli\u003ePart number: DSY01\u003c\/li\u003e\n\u003cli\u003eColours: Silver, blue\u003c\/li\u003e\n\u003cli\u003eUse: Off-road (enduro, motocross)\u003c\/li\u003e\n\u003cli\u003eFitment: Yamaha WR450F (2006–2020)\u003c\/li\u003e\n\u003cli\u003eCheck: Compare with the application list before ordering\u003c\/li\u003e\n\u003cli\u003eRoad approval: None documented, off-road and competition use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Accossato","offers":[{"title":"Silver","offer_id":53900666077450,"sku":"DSY01T","price":31.46,"currency_code":"EUR","in_stock":true},{"title":"Blue","offer_id":53900666110218,"sku":"DSY01B","price":31.46,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/DSY01_silver_e1b768b6-3f61-45b9-ab31-6bf1d3514652.png?v=1791822103"},{"product_id":"accossato-offroad-rear-wheel-spacers-yamaha-yz125-2003-2019-dsy01","title":"Accossato Offroad Rear Wheel Spacers Yamaha YZ125 (2003-2019) – DSY01","description":"\u003cp\u003eThe Yamaha YZ125 keeps its two-stroke motocross following thanks to a simple, light package, and that simplicity still involves taking the rear wheel off after any heavy fall to check nothing was bent or knocked loose. Accossato lists its Offroad Rear Wheel Spacer, known in Italy as the Distanziali ruota posteriore, for the YZ125 built from 2003 to 2019, in blue or silver, sitting either side of the rear hub on the rear axle.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRear wheel spacers for the Yamaha YZ125, model years 2003 to 2019\u003c\/li\u003e\n\u003cli\u003eAccossato code DSY01, a pair fitted left and right of the rear hub\u003c\/li\u003e\n\u003cli\u003eAvailable in blue or silver\u003c\/li\u003e\n\u003cli\u003eSit on the rear axle, between the hub and the swingarm, holding the wheel laterally\u003c\/li\u003e\n\u003cli\u003eSame part also listed by Accossato for the Yamaha WR250F, WR450F and YZ250\u003c\/li\u003e\n\u003cli\u003eAccossato also offers the LC022 launch control fork holder for this bike\u003c\/li\u003e\n\u003cli\u003eNo German ABE on file; built for off-road and competition use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConstruction and Material Quality\u003c\/h2\u003e\u003cp\u003eAccossato's paperwork on the DSY01 stops at the vehicle, the build years and the colour on offer for the YZ125; material and dimensions are left unstated, though the identical spacer set turns up again under the WR250F, the WR450F and the YZ250. Blue and silver are colour choices only, with no effect on how the spacers hold the wheel square. A spacer bent in a crash, or one that has simply gone missing since the last wheel change, should be replaced before the bike is used again.\u003c\/p\u003e\n\u003ch2\u003eBack in the Workshop After a Fall\u003c\/h2\u003e\u003cp\u003eA hard fall on the YZ125 often means a trip back to the workshop before the next session, if only to check the wheel still spins freely and nothing at the rear end has shifted. Pulling the rear wheel for that inspection is the point where a bent or dislodged spacer usually turns up, having taken part of the impact that would otherwise have gone straight into the hub or the axle. Riders doing this kind of post-crash check are usually better off replacing both spacers together rather than keeping one that looks fine next to a damaged one, since a spacer that is slightly out of shape is not always obvious without comparing it side by side with a new part. Getting this right before the bike goes back out avoids a wheel that is subtly out of alignment on the next ride.\u003c\/p\u003e\n\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eAccossato lists the DSY01 for the YZ125 across 2003 to 2019, matching the years used here, sharing the part with the WR250F, the WR450F and the YZ250. The LC022 launch control fork holder is also listed for this bike, for riders refreshing the start end at the same time. Checking the YZ125's exact build date against Accossato's application list before ordering remains worth doing given how long this model has been in production.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\u003cp\u003eNo German ABE is on file for the DSY01, so Accossato lists it for off-road and competition use only; it is not intended for road-registered motorcycles.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\u003cp\u003eSupplied as a pair of rear wheel spacers, left and right, as shown in the product photo, in the colour selected.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: Off-road rear wheel spacers\u003c\/li\u003e\n\u003cli\u003ePart number: DSY01\u003c\/li\u003e\n\u003cli\u003eColours: Silver, blue\u003c\/li\u003e\n\u003cli\u003eUse: Off-road (enduro, motocross)\u003c\/li\u003e\n\u003cli\u003eFitment: Yamaha YZ125 (2003–2019)\u003c\/li\u003e\n\u003cli\u003eCheck: Compare with the application list before ordering\u003c\/li\u003e\n\u003cli\u003eRoad approval: None documented, off-road and competition use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Accossato","offers":[{"title":"Silver","offer_id":53900666142986,"sku":"DSY01T","price":31.46,"currency_code":"EUR","in_stock":true},{"title":"Blue","offer_id":53900666208522,"sku":"DSY01B","price":31.46,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/DSY01_silver_abf807ea-0d8f-403d-a36f-89dc1e3a285d.png?v=1791822113"},{"product_id":"accossato-offroad-rear-wheel-spacers-yamaha-yz250-2003-2019-dsy01","title":"Accossato Offroad Rear Wheel Spacers Yamaha YZ250 (2003-2019) – DSY01","description":"\u003cp\u003eThe Yamaha YZ250 still draws a loyal following among two-stroke motocross riders, and part of keeping one on the track is paying attention to small, easily overlooked parts like the spacers either side of the rear hub. Accossato lists its Offroad Rear Wheel Spacer, known in Italy as the Distanziali ruota posteriore, for the YZ250 built from 2003 to 2019, in blue or silver, sitting either side of the rear hub on the rear axle.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRear wheel spacers for the Yamaha YZ250, model years 2003 to 2019\u003c\/li\u003e\n\u003cli\u003eAccossato code DSY01, a pair fitted left and right of the rear hub\u003c\/li\u003e\n\u003cli\u003eChoice of blue or silver\u003c\/li\u003e\n\u003cli\u003eSit on the rear axle, between the hub and the swingarm, holding the wheel laterally\u003c\/li\u003e\n\u003cli\u003eSame part also listed by Accossato for the Yamaha WR250F, WR450F and YZ125\u003c\/li\u003e\n\u003cli\u003eNo German ABE on file; built for off-road and competition use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConstruction and Material Quality\u003c\/h2\u003e\u003cp\u003eWhat ties the DSY01 to the YZ250 in Accossato's own information is the vehicle, the build years and the colour choice; no material or measurement is given, and the identical spacer set extends to the WR250F, the WR450F and the YZ125. The blue or silver finish is a matter of preference and does not affect how the spacers hold the wheel in place. A spacer that has lost its shape from a hard impact, or one that no longer sits flush against the hub, should be swapped out rather than reused.\u003c\/p\u003e\n\u003ch2\u003eMatching the Spacer Colour to the Bike\u003c\/h2\u003e\u003cp\u003eRiders who keep their YZ250 looking as sharp as it runs often think about small details like the colour of the rear wheel spacers, especially since they sit in plain view whenever the rear wheel is off for a photo or at a bike show. Blue tends to suit a bike kept closer to Yamaha's factory look, while silver reads a little more neutral against a custom paint job or a mix of parts from other brands. Either option does exactly the same job holding the wheel square on the axle, so the choice comes down entirely to what looks right next to the rest of the bike. A rider updating other parts of the rear end at the same time, such as the sprocket or chain, has a natural moment to pick a spacer colour that ties the whole area together.\u003c\/p\u003e\n\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eAccossato's application list carries the DSY01 against the YZ250 for 2003 to 2019, the same span shown here, and the identical part is shared with the WR250F, the WR450F and the YZ125. Owners running more than one of these Yamaha models can treat a spare pair as useful across the whole fleet. Confirming the YZ250's own build year against the application list before ordering is still worth the extra check.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\u003cp\u003eNo German ABE is on file for the DSY01, so Accossato lists it for off-road and competition use only; it is not intended for road-registered motorcycles.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\u003cp\u003eSupplied as a pair of rear wheel spacers, left and right, as shown in the product photo, in the colour selected.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: Off-road rear wheel spacers\u003c\/li\u003e\n\u003cli\u003ePart number: DSY01\u003c\/li\u003e\n\u003cli\u003eColours: Silver, blue\u003c\/li\u003e\n\u003cli\u003eUse: Off-road (enduro, motocross)\u003c\/li\u003e\n\u003cli\u003eFitment: Yamaha YZ250 (2003–2019)\u003c\/li\u003e\n\u003cli\u003eCheck: Compare with the application list before ordering\u003c\/li\u003e\n\u003cli\u003eRoad approval: None documented, off-road and competition use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Accossato","offers":[{"title":"Silver","offer_id":53900667519242,"sku":"DSY01T","price":31.46,"currency_code":"EUR","in_stock":true},{"title":"Blue","offer_id":53900667584778,"sku":"DSY01B","price":31.46,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/DSY01_silver_270eda6a-0461-421d-becc-c2ebd2eff7f2.png?v=1791822133"},{"product_id":"accossato-offroad-rear-wheel-spacers-yamaha-yz250f-2009-2020-dsy02","title":"Accossato Offroad Rear Wheel Spacers Yamaha YZ250F (2009-2020) – DSY02","description":"\u003cp\u003eFinding an original rear wheel spacer for an older Yamaha YZ250F is not always straightforward once a dealer's own stock runs thin, which is where a listed replacement part earns its place in a rider's toolbox. Accossato lists its Offroad Rear Wheel Spacer, known in Italy as the Distanziali ruota posteriore, for the YZ250F built from 2009 to 2020, in blue or silver, sitting either side of the rear hub on the rear axle.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRear wheel spacers for the Yamaha YZ250F, model years 2009 to 2020\u003c\/li\u003e\n\u003cli\u003eAccossato code DSY02, a pair fitted left and right of the rear hub\u003c\/li\u003e\n\u003cli\u003eChoice of blue or silver\u003c\/li\u003e\n\u003cli\u003eSit on the rear axle, between the hub and the swingarm, holding the wheel laterally\u003c\/li\u003e\n\u003cli\u003eSame part also listed by Accossato for the Yamaha YZ450F\u003c\/li\u003e\n\u003cli\u003eAccossato also offers the LC022 launch control fork holder for this bike\u003c\/li\u003e\n\u003cli\u003eNo German ABE on file; built for off-road and competition use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConstruction and Material Quality\u003c\/h2\u003e\u003cp\u003eColour aside, Accossato's listing for the DSY02 against the YZ250F is confined to the vehicle and the build years; no material or dimension is mentioned anywhere in it, and the YZ450F takes the same spacer set. Blue and silver are colour choices only; neither one changes how the spacers hold the wheel square on the axle. A spacer that has been ground down by grit working into the hub, or simply bent out of round, should be replaced rather than put back in.\u003c\/p\u003e\n\u003ch2\u003eReaching for a Spare Instead of the Original Part\u003c\/h2\u003e\u003cp\u003eAs a YZ250F gets older, sourcing the exact original rear wheel spacer through a dealer can mean a wait, a special order, or simply being told the part is no longer stocked. Accossato lists the DSY02 specifically against this bike's years as a listed alternative, so a rider does not have to go without the bike over a part this small. Because the spacer's job is straightforward, holding the wheel laterally and protecting the seals behind the hub, a correctly fitted replacement does the same work as the part it is standing in for. Keeping one of these in reserve is a sensible move for anyone running an older YZ250F regularly, rather than waiting until a wheel is already off the bike with a damaged spacer in hand and nowhere quick to get a replacement.\u003c\/p\u003e\n\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eAccossato lists the DSY02 for the YZ250F across 2009 to 2020, matching the years given here, with the same part carried over to the YZ450F. The LC022 launch control fork holder is also listed for this bike. As with any part spanning more than a decade of production, it is worth checking the YZ250F's exact build year against the application list before ordering.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\u003cp\u003eNo German ABE is on file for the DSY02, so Accossato lists it for off-road and competition use only; it is not intended for road-registered motorcycles.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\u003cp\u003eSupplied as a pair of rear wheel spacers, left and right, as shown in the product photo, in the colour selected.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: Off-road rear wheel spacers\u003c\/li\u003e\n\u003cli\u003ePart number: DSY02\u003c\/li\u003e\n\u003cli\u003eColours: Silver, blue\u003c\/li\u003e\n\u003cli\u003eUse: Off-road (enduro, motocross)\u003c\/li\u003e\n\u003cli\u003eFitment: Yamaha YZ250F (2009–2020)\u003c\/li\u003e\n\u003cli\u003eCheck: Compare with the application list before ordering\u003c\/li\u003e\n\u003cli\u003eRoad approval: None documented, off-road and competition use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Accossato","offers":[{"title":"Silver","offer_id":53900667650314,"sku":"DSY02T","price":31.46,"currency_code":"EUR","in_stock":true},{"title":"Blue","offer_id":53900667683082,"sku":"DSY02B","price":31.46,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/DSY02_silver.png?v=1791822144"},{"product_id":"accossato-offroad-rear-wheel-spacers-yamaha-yz450f-2009-2020-dsy02","title":"Accossato Offroad Rear Wheel Spacers Yamaha YZ450F (2009-2020) – DSY02","description":"\u003cp\u003eA hard-charging Yamaha YZ450F sees plenty of rear wheel changes across a race weekend, from a fresh tyre before the second moto to a quick look at the chain line after a rough first one. Accossato lists its Offroad Rear Wheel Spacer, known in Italy as the Distanziali ruota posteriore, for the YZ450F built from 2009 to 2020, in blue or silver, sitting either side of the rear hub on the rear axle.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRear wheel spacers for the Yamaha YZ450F, model years 2009 to 2020\u003c\/li\u003e\n\u003cli\u003eAccossato code DSY02, a pair fitted left and right of the rear hub\u003c\/li\u003e\n\u003cli\u003eChoice of blue or silver\u003c\/li\u003e\n\u003cli\u003eSit on the rear axle, between the hub and the swingarm, holding the wheel laterally\u003c\/li\u003e\n\u003cli\u003eSame part also listed by Accossato for the Yamaha YZ250F\u003c\/li\u003e\n\u003cli\u003eAccossato also offers the LC022 launch control fork holder for this bike\u003c\/li\u003e\n\u003cli\u003eNo German ABE on file; built for off-road and competition use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConstruction and Material Quality\u003c\/h2\u003e\u003cp\u003eWhat Accossato states about the DSY02 on the YZ450F does not go beyond the vehicle, the build years and the colour on offer; no material or measurement features anywhere in that listing, and the YZ250F takes the identical spacer set. Blue and silver are purely colour choices and have no bearing on how the spacers hold the wheel square. A spacer that has picked up a dent from a slipping wrench, or that no longer sits flush against the hub, should be swapped for a new one.\u003c\/p\u003e\n\u003ch2\u003eA Second Moto Tyre Change\u003c\/h2\u003e\u003cp\u003eBetween motos on a race weekend, a crew working on the YZ450F often has only a short window to fit a fresh rear tyre before the next gate call, and the rear axle comes out as part of that job whether there is time to spare or not. Both spacers drop free the moment the axle clears the hub, and in a rushed pit area with several bikes being worked on at once, it is easy for one to end up kicked aside or mixed in with parts from another machine entirely. Laying the spacers down somewhere deliberate, rather than balancing them on a nearby stand or the ground, avoids that mix-up when the next moto is called sooner than expected. A spare pair kept in the pit box for this exact situation means a missing spacer does not turn a routine tyre change into a late arrival at the gate.\u003c\/p\u003e\n\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eAccossato lists the DSY02 for the YZ450F across 2009 to 2020, the years used here, and the same spacer set is shared with the YZ250F. The LC022 launch control fork holder is also listed for this bike, for a complete start-and-wheel refresh. Checking the YZ450F's exact build year against the application list before ordering remains a sensible step given the length of this run.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\u003cp\u003eNo German ABE is on file for the DSY02, so Accossato lists it for off-road and competition use only; it is not intended for road-registered motorcycles.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\u003cp\u003eSupplied as a pair of rear wheel spacers, left and right, as shown in the product photo, in the colour selected.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: Off-road rear wheel spacers\u003c\/li\u003e\n\u003cli\u003ePart number: DSY02\u003c\/li\u003e\n\u003cli\u003eColours: Silver, blue\u003c\/li\u003e\n\u003cli\u003eUse: Off-road (enduro, motocross)\u003c\/li\u003e\n\u003cli\u003eFitment: Yamaha YZ450F (2009–2020)\u003c\/li\u003e\n\u003cli\u003eCheck: Compare with the application list before ordering\u003c\/li\u003e\n\u003cli\u003eRoad approval: None documented, off-road and competition use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Accossato","offers":[{"title":"Silver","offer_id":53900667945226,"sku":"DSY02T","price":31.46,"currency_code":"EUR","in_stock":true},{"title":"Blue","offer_id":53900667977994,"sku":"DSY02B","price":31.46,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/DSY02_silver_f4746f4c-3088-4421-bdcb-dda7ee06434b.png?v=1791822163"},{"product_id":"accossato-offroad-rear-wheel-spacers-yamaha-yz85-2002-2017-dsy03","title":"Accossato Offroad Rear Wheel Spacers Yamaha YZ85 (2002-2017) – DSY03","description":"\u003cp\u003eThe Yamaha YZ85 is a popular step for young riders moving up from a smaller minibike into full motocross-style competition, and its rear wheel comes off just as often as on any larger bike, if not more, given how much a growing rider's bike setup gets fiddled with. Accossato lists its Offroad Rear Wheel Spacer, known in Italy as the Distanziali ruota posteriore, for the YZ85 built from 2002 to 2017, in blue or silver, sitting either side of the rear hub on the rear axle.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRear wheel spacers for the Yamaha YZ85, model years 2002 to 2017\u003c\/li\u003e\n\u003cli\u003eAccossato code DSY03, a pair fitted left and right of the rear hub\u003c\/li\u003e\n\u003cli\u003eChoice of blue or silver\u003c\/li\u003e\n\u003cli\u003eSit on the rear axle, between the hub and the swingarm, holding the wheel laterally\u003c\/li\u003e\n\u003cli\u003eAccossato also offers the LC010 launch control fork holder for this bike\u003c\/li\u003e\n\u003cli\u003eNo German ABE on file; built for off-road and competition use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConstruction and Material Quality\u003c\/h2\u003e\u003cp\u003eEach spacer sits between the hub and the swingarm on its own side of the rear axle, and the YZ85's own build date is still worth checking against the application list before ordering. Blue and silver are colour options only; neither affects how the spacers hold the wheel in place. A spacer that has been bent, lost in the course of a wheel change, or simply worn thin after several seasons should be replaced rather than reused.\u003c\/p\u003e\n\u003ch2\u003eLooking After a Young Rider's First Race Bike\u003c\/h2\u003e\u003cp\u003eA YZ85 often passes through more than one set of hands over its life, moving from one young rider to a younger sibling or on to another family once a rider outgrows it, and small details like a missing or damaged rear wheel spacer tend to go unnoticed until someone finally pulls the wheel. Keeping the rear end properly sorted on a bike this size matters just as much as on an adult machine, even though it is easy to assume a smaller bike takes less looking after. Anyone taking on a used YZ85, or keeping one tidy for resale down the line, can check the spacers as part of a general once-over, replacing anything that looks worn rather than waiting for a problem to show up mid-ride. A bike handed between riders over several seasons is also a good reason to simply carry a spare pair in the garage.\u003c\/p\u003e\n\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eAccossato's application list runs the DSY03 against the YZ85 for 2002 to 2017, matching the years given here. The LC010 launch control fork holder is also listed for this bike, useful for a rider working on both ends of the bike at once. Because this model has covered a long run of years and often changes hands, checking the exact build date against the application list before ordering is worth the extra care.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\u003cp\u003eNo German ABE is on file for the DSY03, so Accossato lists it for off-road and competition use only; it is not intended for road-registered motorcycles.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\u003cp\u003eSupplied as a pair of rear wheel spacers, left and right, as shown in the product photo, in the colour selected.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: Off-road rear wheel spacers\u003c\/li\u003e\n\u003cli\u003ePart number: DSY03\u003c\/li\u003e\n\u003cli\u003eColours: Silver, blue\u003c\/li\u003e\n\u003cli\u003eUse: Off-road (enduro, motocross)\u003c\/li\u003e\n\u003cli\u003eFitment: Yamaha YZ85 (2002–2017)\u003c\/li\u003e\n\u003cli\u003eCheck: Compare with the application list before ordering\u003c\/li\u003e\n\u003cli\u003eRoad approval: None documented, off-road and competition use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Accossato","offers":[{"title":"Silver","offer_id":53900668109066,"sku":"DSY03T","price":46.86,"currency_code":"EUR","in_stock":true},{"title":"Blue","offer_id":53900668141834,"sku":"DSY03B","price":46.86,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/DSY03_silver.png?v=1791822183"},{"product_id":"accossato-offroad-rear-wheel-spacers-honda-crf150r-2007-2015-dsh02","title":"Accossato Offroad Rear Wheel Spacers Honda CRF150R (2007-2015) – DSH02","description":"\u003cp\u003eThe Honda CRF150R is Honda's four-stroke step-up machine for riders moving on from 85cc minibikes into full-sized motocross racing, raced widely in junior and supermini classes. Accossato lists its DSH02 rear wheel spacer pair for the CRF150R built between 2007 and 2015, fitted either side of the rear hub to keep the wheel seated correctly whenever it comes off for a tyre change or inspection.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRear wheel spacer pair for the Honda CRF150R, 2007 to 2015\u003c\/li\u003e\n\u003cli\u003eAccossato code DSH02, fitted left and right of the rear hub\u003c\/li\u003e\n\u003cli\u003eKeeps the rear wheel seated correctly between the hub and swingarm\u003c\/li\u003e\n\u003cli\u003eAvailable in red or silver\u003c\/li\u003e\n\u003cli\u003eSame bike also fitted with the Accossato LC001 launch control device\u003c\/li\u003e\n\u003cli\u003eNo German ABE on file; built for off-road and competition use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConstruction and Material Quality\u003c\/h2\u003e\n\u003cp\u003eAccossato shapes the DSH02 specifically to the CRF150R's rear hub rather than offering one spacer to suit several bikes across its range, so fitment depends on matching the part to this exact machine rather than guessing by eye. Red and silver are simply the two colour options Accossato offers; neither changes how the spacer holds the wheel in place. A spacer that has picked up a heavy knock or shows any sign of being bent out of shape is worth replacing rather than trusting by eye, and while the wheel is out it is worth wiping the axle clean and checking the seal on that side of the hub before greasing and torquing the axle to Honda's own figures.\u003c\/p\u003e\n\u003ch2\u003eFamily Garage Before a Season of Junior Motocross\u003c\/h2\u003e\n\u003cp\u003eMany CRF150R owners are parents or club mechanics preparing a young rider's bike for the season ahead, going through the wheels, chain and small hardware long before the first gate drops. The rear wheel spacers are an easy part to overlook in that routine, because they only become visible once the wheel is out, and a worn or missing spacer is the kind of thing that gets noticed at the worst possible moment, mid-weekend at a race meeting with no spare on hand. Working through the rear hub during winter preparation, rather than waiting for a problem to show itself trackside, is the more straightforward way to catch it early, and keeping a spare pair in the toolbox means a lost spacer in the paddock dirt is not a show-stopper on race morning.\u003c\/p\u003e\n\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\n\u003cp\u003eHonda built the CRF150R across 2007 to 2015, and that full span appears on Accossato's own application list for the DSH02. A rider addressing this bike's rear hub over winter will also find the Accossato LC001 launch control device listed for the same machine, so both ends of the bike can be sorted in one order. Given how closely minicross models can be revised year to year, confirming a specific CRF150R against the list before buying is sensible.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eNo German ABE is on file for the DSH02, so Accossato lists it for off-road and competition use rather than for use on public roads.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eThis listing covers one pair of rear wheel spacers, left and right, in the colour you choose from the options above.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: Off-road rear wheel spacers\u003c\/li\u003e\n\u003cli\u003ePart number: DSH02\u003c\/li\u003e\n\u003cli\u003eColours: Silver, red\u003c\/li\u003e\n\u003cli\u003eUse: Off-road (enduro, motocross)\u003c\/li\u003e\n\u003cli\u003eFitment: Honda CRF150R (2007–2015)\u003c\/li\u003e\n\u003cli\u003eCheck: Compare with the application list before ordering\u003c\/li\u003e\n\u003cli\u003eRoad approval: None documented, off-road and competition use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Accossato","offers":[{"title":"Silver","offer_id":53900690981130,"sku":"DSH02T","price":31.46,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":53900691865866,"sku":"DSH02R","price":31.46,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/DSH02_silver.png?v=1791822259"},{"product_id":"accossato-offroad-rear-wheel-spacers-honda-crf250r-2004-2018-dsh01","title":"Accossato Offroad Rear Wheel Spacers Honda CRF250R (2004-2018) – DSH01","description":"\u003cp\u003eThe Honda CRF250R is Honda's mainstream 250cc four-stroke motocross machine, the bike most riders step up to once they have outgrown the 150 and 125 classes. Accossato lists its DSH01 rear wheel spacer pair for the CRF250R built between 2004 and 2018, sitting either side of the rear hub to keep the wheel seated correctly whenever it is pulled for a tyre change.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRear wheel spacer pair for the Honda CRF250R, 2004 to 2018\u003c\/li\u003e\n\u003cli\u003eAccossato code DSH01, fitted left and right of the rear hub\u003c\/li\u003e\n\u003cli\u003eKeeps the rear wheel seated correctly between the hub and swingarm\u003c\/li\u003e\n\u003cli\u003eAvailable in red or silver\u003c\/li\u003e\n\u003cli\u003eSame part also listed for the Honda CRF250X and Honda CRF450R\u003c\/li\u003e\n\u003cli\u003eAccossato also offers the LC006 launch control device for this bike\u003c\/li\u003e\n\u003cli\u003eNo German ABE on file; built for off-road and competition use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConstruction and Material Quality\u003c\/h2\u003e\n\u003cp\u003eAccossato shapes the DSH01 to the CRF250R's own hub rather than selling one universal spacer across its range, so it is listed against this bike and a handful of related models rather than fitted by guesswork. Red and silver are simply the two colour options; the choice does not change how the spacer holds the wheel in place. A spacer that has taken a hard knock from a rock or a heavy landing and no longer looks straight is worth replacing rather than trusting, and refitting either one is also a sensible moment to look over the hub seal on that side and to clean, grease and torque the axle to the figures in Honda's manual.\u003c\/p\u003e\n\u003ch2\u003eChanging a Wheel Between Motos\u003c\/h2\u003e\n\u003cp\u003eRace day on a 250cc four-stroke often means more than one moto, and a rear tyre swapped between races to suit changing track conditions is a common pit-area job rather than a rare one. Pulling the rear wheel in that setting means the spacers come out with it, and a small, loose part handled in a hurry between motos is exactly the kind of thing that ends up on the ground rather than back on the axle. Keeping track of which side each one came from, and having a spare pair in the pit box rather than hunting through the paddock for a replacement, keeps a routine wheel change from turning into a delay before the next race.\u003c\/p\u003e\n\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\n\u003cp\u003eAccossato covers 2004 to 2018 for the CRF250R with the DSH01, matching the years shown here, and Accossato lists the same part for the Honda CRF250X and the Honda CRF450R as well. A rider running the CRF250R alongside the LC006 launch control device, also offered for this bike, can order both together for a single parts run before the season starts. As always, matching the CRF250R's exact build year to Accossato's application list avoids any doubt before paying.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eNo German ABE is on file for the DSH01, so Accossato lists it for off-road and competition use rather than for use on public roads.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eThis listing covers one pair of rear wheel spacers, left and right, in the colour you choose from the options above.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: Off-road rear wheel spacers\u003c\/li\u003e\n\u003cli\u003ePart number: DSH01\u003c\/li\u003e\n\u003cli\u003eColours: Silver, red\u003c\/li\u003e\n\u003cli\u003eUse: Off-road (enduro, motocross)\u003c\/li\u003e\n\u003cli\u003eFitment: Honda CRF250R (2004–2018)\u003c\/li\u003e\n\u003cli\u003eCheck: Compare with the application list before ordering\u003c\/li\u003e\n\u003cli\u003eRoad approval: None documented, off-road and competition use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Accossato","offers":[{"title":"Silver","offer_id":53900699664650,"sku":"DSH01T","price":31.46,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":53900700549386,"sku":"DSH01R","price":31.46,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/DSH01_silver.png?v=1791822281"},{"product_id":"accossato-offroad-rear-wheel-spacers-honda-crf250x-2004-2018-dsh01","title":"Accossato Offroad Rear Wheel Spacers Honda CRF250X (2004-2018) – DSH01","description":"\u003cp\u003eThe Honda CRF250X is Honda's enduro-oriented sibling of the CRF250R, built for trail and cross-country riding rather than stadium motocross starts. Accossato lists its DSH01 rear wheel spacer pair for the CRF250X built between 2004 and 2018, sitting either side of the rear hub and dropping free the moment the wheel comes out for a puncture repair or a tyre swap.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRear wheel spacer pair for the Honda CRF250X, 2004 to 2018\u003c\/li\u003e\n\u003cli\u003eAccossato code DSH01, fitted left and right of the rear hub\u003c\/li\u003e\n\u003cli\u003eDrops free of the hub the moment the rear wheel is removed\u003c\/li\u003e\n\u003cli\u003eAvailable in red or silver\u003c\/li\u003e\n\u003cli\u003eSame part also listed for the Honda CRF250R and Honda CRF450R\u003c\/li\u003e\n\u003cli\u003eAccossato also offers the LC003 launch control device for this bike\u003c\/li\u003e\n\u003cli\u003eNo German ABE on file; built for off-road and competition use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConstruction and Material Quality\u003c\/h2\u003e\n\u003cp\u003eRather than one spacer marketed across Honda's whole off-road range, the DSH01 is listed for the CRF250X and the small group of related bikes Accossato lists alongside it. The red and silver options are purely cosmetic. Once a spacer has been bent or chipped in hard trail use, it is worth retiring rather than refitting, given that Accossato's published detail covers colour, fitment and build years but says nothing about how a damaged part should perform afterwards.\u003c\/p\u003e\n\u003ch2\u003eThe Spacer That Walks Off in the Mud\u003c\/h2\u003e\n\u003cp\u003eTrail and enduro riding puts the rear wheel on and off far more casually than a motocross paddock does, often at the roadside or in a clearing rather than on a proper bench, and a rear spacer that drops straight out of the hub the moment the wheel is pulled is an easy thing to lose in long grass or soft ground. Setting the spacers down somewhere deliberate, a glove, a tool tray, anything other than the floor, before starting the rest of the job avoids the awkward search that follows once the new tyre is fitted and one spacer is nowhere to be found. Carrying a spare pair in the trail kit covers the day it does go missing without turning a trailside repair into a walk home.\u003c\/p\u003e\n\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\n\u003cp\u003eHonda's CRF250X shares its DSH01 fitment, 2004 to 2018, with the related CRF250R and CRF450R rather than standing alone. For riders who also line up at mass-start enduro events, the LC003 launch control device is listed for the same CRF250X and makes a sensible companion order. A particular bike's build year is still worth checking against Accossato's own list rather than assumed from the range given here.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eNo German ABE is on file for the DSH01, so Accossato lists it for off-road and competition use rather than for use on public roads.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eThis listing covers one pair of rear wheel spacers, left and right, in the colour you choose from the options above.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: Off-road rear wheel spacers\u003c\/li\u003e\n\u003cli\u003ePart number: DSH01\u003c\/li\u003e\n\u003cli\u003eColours: Silver, red\u003c\/li\u003e\n\u003cli\u003eUse: Off-road (enduro, motocross)\u003c\/li\u003e\n\u003cli\u003eFitment: Honda CRF250X (2004–2018)\u003c\/li\u003e\n\u003cli\u003eCheck: Compare with the application list before ordering\u003c\/li\u003e\n\u003cli\u003eRoad approval: None documented, off-road and competition use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Accossato","offers":[{"title":"Silver","offer_id":53900707954954,"sku":"DSH01T","price":31.46,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":53900708839690,"sku":"DSH01R","price":31.46,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/DSH01_silver_3ab66688-5423-4d22-aa69-0dee207d0148.png?v=1791822300"},{"product_id":"accossato-offroad-rear-wheel-spacers-honda-crf450r-2004-2018-dsh01","title":"Accossato Offroad Rear Wheel Spacers Honda CRF450R (2004-2018) – DSH01","description":"\u003cp\u003eThe Honda CRF450R is Honda's 450cc four-stroke motocross machine, built for its stadium and outdoor motocross range. Accossato lists its DSH01 rear wheel spacer pair for the CRF450R built between 2004 and 2018, fitted either side of the rear hub and removed along with the wheel whenever the rear tyre comes off.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRear wheel spacer pair for the Honda CRF450R, 2004 to 2018\u003c\/li\u003e\n\u003cli\u003eAccossato code DSH01, fitted left and right of the rear hub\u003c\/li\u003e\n\u003cli\u003eRemoved along with the rear wheel for a tyre change or inspection\u003c\/li\u003e\n\u003cli\u003eAvailable in red or silver\u003c\/li\u003e\n\u003cli\u003eSame part also listed for the Honda CRF250R, Honda CRF250X and Honda CRF450RX\u003c\/li\u003e\n\u003cli\u003eAccossato also offers the LC006 launch control device for this bike\u003c\/li\u003e\n\u003cli\u003eNo German ABE on file; built for off-road and competition use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConstruction and Material Quality\u003c\/h2\u003e\n\u003cp\u003eHonda's CRF450R appears by name on Accossato's application list for the DSH01, so the fit is documented rather than assumed. Red or silver is simply a finish choice, with no effect on fit. A flat spot or a crack picked up over a hard weekend of racing is reason enough to bin a spacer rather than refit it, since what Accossato states about the part stops at colour, fitment and build years.\u003c\/p\u003e\n\u003ch2\u003eA Fresh Tyre for the Drive Home\u003c\/h2\u003e\n\u003cp\u003eA 450cc motocross machine sees its rear tyre worked hard over a full day of practice and racing, and many riders fit a fresh rear tyre once the chequered flag has dropped rather than ride it down on a worn one through the following week's track days. That end-of-weekend tyre change happens away from the pressure of race day, but it is also the point where small parts like the rear spacers, handled quickly in the paddock between sessions, get set aside and occasionally left behind in the back of a van or a tool chest. Checking both spacers are back with the bike before it gets loaded up, rather than discovering one missing at the next outing, saves a last-minute order before the next meeting.\u003c\/p\u003e\n\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe CRF450R's DSH01 fitment, 2004 to 2018, is shared with the CRF250R, the CRF250X and the CRF450RX; Accossato lists the same part for all four. Owners wanting the front end sorted too will find the LC006 launch control device listed for the same bike. None of that replaces checking a specific CRF450R's own build year against Accossato's list before paying.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eNo German ABE is on file for the DSH01, so Accossato lists it for off-road and competition use rather than for use on public roads.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eThis listing covers one pair of rear wheel spacers, left and right, in the colour you choose from the options above.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: Off-road rear wheel spacers\u003c\/li\u003e\n\u003cli\u003ePart number: DSH01\u003c\/li\u003e\n\u003cli\u003eColours: Silver, red\u003c\/li\u003e\n\u003cli\u003eUse: Off-road (enduro, motocross)\u003c\/li\u003e\n\u003cli\u003eFitment: Honda CRF450R (2004–2018)\u003c\/li\u003e\n\u003cli\u003eCheck: Compare with the application list before ordering\u003c\/li\u003e\n\u003cli\u003eRoad approval: None documented, off-road and competition use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Accossato","offers":[{"title":"Silver","offer_id":53900715720970,"sku":"DSH01T","price":31.46,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":53900715983114,"sku":"DSH01R","price":31.46,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/DSH01_silver_60e8a4b9-d9e8-46c9-9c5c-5c6beb0feb44.png?v=1791822319"},{"product_id":"accossato-offroad-rear-wheel-spacers-honda-crf450rx-2017-2018-dsh01","title":"Accossato Offroad Rear Wheel Spacers Honda CRF450RX (2017-2018) – DSH01","description":"\u003cp\u003eThe Honda CRF450RX is Honda's cross-country and off-road competition version of the CRF450R, built for off-road racing rather than stadium motocross starts. Accossato lists its DSH01 rear wheel spacer pair for the CRF450RX built in 2017 and 2018, sitting either side of the rear hub where a hard fall on rocky or rutted ground can just as easily bend a spacer as a careless wheel change can.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRear wheel spacer pair for the Honda CRF450RX, 2017 and 2018\u003c\/li\u003e\n\u003cli\u003eAccossato code DSH01, fitted left and right of the rear hub\u003c\/li\u003e\n\u003cli\u003eKeeps the rear wheel seated correctly between the hub and swingarm\u003c\/li\u003e\n\u003cli\u003eAvailable in red or silver\u003c\/li\u003e\n\u003cli\u003eSame part also listed for the Honda CRF450R, Honda CRF250X and Honda CRF450X\u003c\/li\u003e\n\u003cli\u003eNo German ABE on file; built for off-road and competition use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConstruction and Material Quality\u003c\/h2\u003e\n\u003cp\u003eThe CRF450RX takes the same DSH01 spacer as a handful of related Honda machines, listed by Accossato for this bike rather than offered as a one-size part across unrelated bikes. Red and silver remain the only two finishes. A spacer knocked out of true in a hard off-road fall is better replaced outright than trusted back onto the bike, and the same moment with the wheel out is worth using to run an eye over the seal on that side of the hub, then grease the axle and tighten it to Honda's torque figure.\u003c\/p\u003e\n\u003ch2\u003eAfter a Hard Fall on Rocky Ground\u003c\/h2\u003e\n\u003cp\u003eOff-road competition on a CRF450RX puts the rear wheel through rock strikes and awkward landings that a stadium motocross track rarely produces, and a bike that has gone down hard on one side is worth a proper look at the rear hub before it goes out again, not just a wipe-down and a quick glance. Pulling the wheel after a fall, rather than only after a crash that looked serious, catches a spacer that has been knocked out of shape without yet causing a problem on the trail. That short workshop check, wheel out, spacers inspected, wheel back in, costs little time against the alternative of a spacer failing to seat properly at the next event.\u003c\/p\u003e\n\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\n\u003cp\u003eBuilt for only two years, 2017 and 2018, the CRF450RX has a short entry on Accossato's application list for the DSH01, shared with the longer-running Honda CRF450R, CRF250X and CRF450X. That short window leaves little room for doubt about which bike this covers, but checking the specific build year against Accossato's list is still a sensible habit before ordering.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eNo German ABE is on file for the DSH01, so Accossato lists it for off-road and competition use rather than for use on public roads.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eThis listing covers one pair of rear wheel spacers, left and right, in the colour you choose from the options above.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: Off-road rear wheel spacers\u003c\/li\u003e\n\u003cli\u003ePart number: DSH01\u003c\/li\u003e\n\u003cli\u003eColours: Silver, red\u003c\/li\u003e\n\u003cli\u003eUse: Off-road (enduro, motocross)\u003c\/li\u003e\n\u003cli\u003eFitment: Honda CRF450RX (2017–2018)\u003c\/li\u003e\n\u003cli\u003eCheck: Compare with the application list before ordering\u003c\/li\u003e\n\u003cli\u003eRoad approval: None documented, off-road and competition use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Accossato","offers":[{"title":"Silver","offer_id":53900718866698,"sku":"DSH01T","price":31.46,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":53900720111882,"sku":"DSH01R","price":31.46,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/DSH01_silver_e1a31277-7892-41e1-b10c-4fad2c4c377b.png?v=1791822338"},{"product_id":"accossato-offroad-rear-wheel-spacers-honda-crf450x-2004-2017-dsh01","title":"Accossato Offroad Rear Wheel Spacers Honda CRF450X (2004-2017) – DSH01","description":"\u003cp\u003eThe Honda CRF450X is Honda's longstanding enduro and trail sibling of the CRF450R, built for off-road riding before the newer CRF450RX took over that role. Accossato lists its DSH01 rear wheel spacer pair for the CRF450X built between 2004 and 2017, fitted either side of the rear hub and worth keeping on hand as these older bikes stay in service well past their original production years.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRear wheel spacer pair for the Honda CRF450X, 2004 to 2017\u003c\/li\u003e\n\u003cli\u003eAccossato code DSH01, fitted left and right of the rear hub\u003c\/li\u003e\n\u003cli\u003eKeeps the rear wheel seated correctly between the hub and swingarm\u003c\/li\u003e\n\u003cli\u003eAvailable in red or silver\u003c\/li\u003e\n\u003cli\u003eSame part also listed for the Honda CRF450R, Honda CRF250R and Honda CRF450RX\u003c\/li\u003e\n\u003cli\u003eAccossato also offers the LC003 launch control device for this bike\u003c\/li\u003e\n\u003cli\u003eNo German ABE on file; built for off-road and competition use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConstruction and Material Quality\u003c\/h2\u003e\n\u003cp\u003eAn older bike like the CRF450X still gets the DSH01 built specifically to its rear hub, and Accossato lists the same part for a short group of related Honda models rather than as a generic part. Red and silver cover the available finishes, neither affecting how the spacer seats. A spacer that has lost its shape after years of trail use is worth swapping outright, since Accossato's own detail covers colour, fitment and build years without going further into wear limits.\u003c\/p\u003e\n\u003ch2\u003eKeeping an Older Enduro Bike Running\u003c\/h2\u003e\n\u003cp\u003eA CRF450X built towards the start of its 2004 to 2017 run is now an older enduro bike, and owners keeping one going tend to look for a sensible aftermarket part rather than chasing an increasingly scarce original Honda spacer through a dealer network. Accossato's DSH01 fills that gap directly, listed for every year of that run and offered in the same two colours regardless of how old the individual bike has become. Buying a spare pair alongside a replacement, rather than waiting for the originals to fail completely, is a sensible way to keep an older CRF450X on the trail without hunting for a discontinued part at the worst possible moment.\u003c\/p\u003e\n\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\n\u003cp\u003eSpanning 2004 to 2017, the CRF450X's DSH01 fitment sits alongside the Honda CRF450R, the CRF250R and the newer CRF450RX on Accossato's application list, which lists the same part for all four. The LC003 launch control device, also listed for the CRF450X, covers the front end of an older bike in the same order. Checking a given CRF450X's exact year against the list is worth the small effort before buying.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eNo German ABE is on file for the DSH01, so Accossato lists it for off-road and competition use rather than for use on public roads.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eThis listing covers one pair of rear wheel spacers, left and right, in the colour you choose from the options above.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: Off-road rear wheel spacers\u003c\/li\u003e\n\u003cli\u003ePart number: DSH01\u003c\/li\u003e\n\u003cli\u003eColours: Silver, red\u003c\/li\u003e\n\u003cli\u003eUse: Off-road (enduro, motocross)\u003c\/li\u003e\n\u003cli\u003eFitment: Honda CRF450X (2004–2017)\u003c\/li\u003e\n\u003cli\u003eCheck: Compare with the application list before ordering\u003c\/li\u003e\n\u003cli\u003eRoad approval: None documented, off-road and competition use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Accossato","offers":[{"title":"Silver","offer_id":53900723781898,"sku":"DSH01T","price":31.46,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":53900723945738,"sku":"DSH01R","price":31.46,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/DSH01_silver_d696098f-5efe-40e8-84b6-5fd1d9897c1f.png?v=1791822348"},{"product_id":"accossato-offroad-rear-wheel-spacers-husqvarna-fc-250-2014-2018-dsm01","title":"Accossato Offroad Rear Wheel Spacers Husqvarna FC 250 (2014-2018) – DSM01","description":"\u003cp\u003eHusqvarna's FC 250 is part of the brand's four-stroke motocross range, built for stadium and outdoor racing at the 250cc level. Accossato lists its DSM01 rear wheel spacer pair for the FC 250 built between 2014 and 2018, fitted either side of the rear hub and removed along with the wheel for a tyre change or inspection.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRear wheel spacer pair for the Husqvarna FC 250, 2014 to 2018\u003c\/li\u003e\n\u003cli\u003eAccossato code DSM01, fitted left and right of the rear hub\u003c\/li\u003e\n\u003cli\u003eRemoved along with the rear wheel for a tyre change or inspection\u003c\/li\u003e\n\u003cli\u003eAvailable in orange or silver\u003c\/li\u003e\n\u003cli\u003eSame part also listed for the Husqvarna FC 350, FE 450 and TC 125\u003c\/li\u003e\n\u003cli\u003eNo German ABE on file; built for off-road and competition use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConstruction and Material Quality\u003c\/h2\u003e\n\u003cp\u003eOrange and silver are the two finishes Accossato offers for the DSM01, and neither one says anything about how the spacer is built; Accossato's listing for the FC 250 covers colour, fitment and build years only. Accossato lists the same part for a defined group of related Husqvarna models rather than marketing it as a fit-anything spacer. A spacer that comes out of a hard moto bent or scored across its face is better replaced than reused, and pulling it is also a convenient moment to look at the seal on that side of the hub before the wheel goes back together.\u003c\/p\u003e\n\u003ch2\u003eA Wheel Change Between Motos\u003c\/h2\u003e\n\u003cp\u003eA 250cc four-stroke motocross weekend usually runs to more than one moto, and swapping the rear tyre between races to suit a track that is drying out, or cutting up badly, is a routine pit-area job rather than an unusual one. Pulling the rear wheel for that swap brings the spacers out with it, and a small loose part passed between hands in a rushed pit stop is easily set down somewhere it should not be. Keeping the two spacers together in a tray rather than loose in a tool roll, and checking both go back in before the bike rolls to the gate, turns a routine wheel change into a non-event rather than a last-minute search.\u003c\/p\u003e\n\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\n\u003cp\u003eHusqvarna built the FC 250 across 2014 to 2018, the window Accossato lists for the DSM01 against this bike. The same part also covers the FC 350, the FE 450 and the TC 125, part of a wider group of related Husqvarna models Accossato lists for this code. As with any Accossato part, a given FC 250's exact build year is worth confirming against the application list before ordering.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eNo German ABE is on file for the DSM01, so Accossato lists it for off-road and competition use rather than for use on public roads.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eThis listing covers one pair of rear wheel spacers, left and right, in the colour you choose from the options above.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: Off-road rear wheel spacers\u003c\/li\u003e\n\u003cli\u003ePart number: DSM01\u003c\/li\u003e\n\u003cli\u003eColours: Silver, orange\u003c\/li\u003e\n\u003cli\u003eUse: Off-road (enduro, motocross)\u003c\/li\u003e\n\u003cli\u003eFitment: Husqvarna FC 250 (2014–2018)\u003c\/li\u003e\n\u003cli\u003eCheck: Compare with the application list before ordering\u003c\/li\u003e\n\u003cli\u003eRoad approval: None documented, off-road and competition use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Accossato","offers":[{"title":"Silver","offer_id":53900724961546,"sku":"DSM01T","price":37.68,"currency_code":"EUR","in_stock":true},{"title":"Orange","offer_id":53900724994314,"sku":"DSM01A","price":37.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/DSM01_silver.png?v=1791822369"},{"product_id":"accossato-offroad-rear-wheel-spacers-husqvarna-fc-350-2014-2018-dsm01","title":"Accossato Offroad Rear Wheel Spacers Husqvarna FC 350 (2014-2018) – DSM01","description":"\u003cp\u003eThe Husqvarna FC 350 sits in the middle of Husqvarna's four-stroke motocross range, built for riders who want more engine than the FC 250 without stepping up to the full-size 450. Accossato lists its DSM01 rear wheel spacer pair for the FC 350 built between 2014 and 2018, sitting either side of the rear hub and worked loose each time the rear wheel comes off.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRear wheel spacer pair for the Husqvarna FC 350, 2014 to 2018\u003c\/li\u003e\n\u003cli\u003eAccossato code DSM01, fitted left and right of the rear hub\u003c\/li\u003e\n\u003cli\u003eComes free of the hub whenever the rear wheel is removed\u003c\/li\u003e\n\u003cli\u003eAvailable in orange or silver\u003c\/li\u003e\n\u003cli\u003eSame part also listed for the Husqvarna FC 450, FE 250 and TC 250\u003c\/li\u003e\n\u003cli\u003eNo German ABE on file; built for off-road and competition use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConstruction and Material Quality\u003c\/h2\u003e\n\u003cp\u003eThe DSM01 is matched to the FC 350's rear hub, and Accossato lists the same part for a wider Husqvarna group rather than selling it as a generic spacer. Colour is limited to orange or silver, a cosmetic choice with no bearing on how the part seats. Since Accossato publishes nothing about the material behind either finish, the sensible test after a hard crash is a close look at the spacer itself rather than an assumption that it has shrugged off the impact.\u003c\/p\u003e\n\u003ch2\u003eA Fresh Tyre Once the Racing Is Done\u003c\/h2\u003e\n\u003cp\u003eMany FC 350 owners leave the rear tyre alone through a full day of practice and racing and only swap it once the chequered flag is out, rather than risk a worn tyre mid-moto. That end-of-day job tends to happen at a slower pace than a pit-area change between races, but it still means the rear wheel, and the two spacers that come with it, spend time out of the bike while other things get packed away around it. Setting the spacers somewhere they will not get swept into a bag of spares by mistake, and checking both are back in place before the bike is loaded, avoids an unpleasant discovery the next time the wheel needs to come off.\u003c\/p\u003e\n\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\n\u003cp\u003eAccossato's DSM01 fitment for the FC 350 runs 2014 to 2018, matching the production window shown here, and reaches across to the FC 450, the FE 250 and the TC 250, part of the wider Husqvarna group Accossato covers for this part. Confirming a specific FC 350's build year against the application list remains worth doing before ordering.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eNo German ABE is on file for the DSM01, so Accossato lists it for off-road and competition use rather than for use on public roads.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eThis listing covers one pair of rear wheel spacers, left and right, in the colour you choose from the options above.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: Off-road rear wheel spacers\u003c\/li\u003e\n\u003cli\u003ePart number: DSM01\u003c\/li\u003e\n\u003cli\u003eColours: Silver, orange\u003c\/li\u003e\n\u003cli\u003eUse: Off-road (enduro, motocross)\u003c\/li\u003e\n\u003cli\u003eFitment: Husqvarna FC 350 (2014–2018)\u003c\/li\u003e\n\u003cli\u003eCheck: Compare with the application list before ordering\u003c\/li\u003e\n\u003cli\u003eRoad approval: None documented, off-road and competition use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Accossato","offers":[{"title":"Silver","offer_id":53900725027082,"sku":"DSM01T","price":37.68,"currency_code":"EUR","in_stock":true},{"title":"Orange","offer_id":53900725092618,"sku":"DSM01A","price":37.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/DSM01_silver_3f72798a-b0d8-4d12-a0b8-3f0709e71385.png?v=1791822379"},{"product_id":"accossato-offroad-rear-wheel-spacers-husqvarna-fc-450-2014-2018-dsm01","title":"Accossato Offroad Rear Wheel Spacers Husqvarna FC 450 (2014-2018) – DSM01","description":"\u003cp\u003eThe Husqvarna FC 450 tops the brand's four-stroke motocross range, the bike most riders move up to once they want the biggest engine Husqvarna offers in a motocross chassis. Accossato lists its DSM01 rear wheel spacer pair for the FC 450 built between 2014 and 2018, fitted either side of the rear hub and worth including in any proper look over the bike before a season starts.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRear wheel spacer pair for the Husqvarna FC 450, 2014 to 2018\u003c\/li\u003e\n\u003cli\u003eAccossato code DSM01, fitted left and right of the rear hub\u003c\/li\u003e\n\u003cli\u003eKeeps the rear wheel seated correctly between the hub and swingarm\u003c\/li\u003e\n\u003cli\u003eAvailable in orange or silver\u003c\/li\u003e\n\u003cli\u003eSame part also listed for the Husqvarna FC 250, FE 350 and TE 250\u003c\/li\u003e\n\u003cli\u003eNo German ABE on file; built for off-road and competition use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConstruction and Material Quality\u003c\/h2\u003e\n\u003cp\u003eBecause the FC 450 sits at the top of Husqvarna's four-stroke motocross range, it is worth being just as thorough with small parts like the DSM01 spacer as with anything else on the bike. Accossato offers it in orange or silver and names this bike on its application list; the same part is also listed for a group of related Husqvarna models. Nothing in Accossato's own description covers the material behind either colour, so a spacer that looks anything other than true after hard use is one to swap rather than second-guess.\u003c\/p\u003e\n\u003ch2\u003eWorking Through the Bike Before the Season Starts\u003c\/h2\u003e\n\u003cp\u003ePreparing a 450cc motocross machine for a new season usually means more than an oil change and a fresh set of levers; it is the point where small, easily ignored parts get a proper look rather than a quick glance. The rear wheel spacers are exactly that kind of part: fine for months at a time, then suddenly the thing holding up a whole weekend if one turns out to be worn or missing once the bike is already loaded for the first round. Pulling the rear wheel during winter preparation, rather than leaving it until the first time the tyre needs changing mid-season, puts the DSM01 on the same checklist as everything else that gets looked at before the gate drops on round one.\u003c\/p\u003e\n\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe FC 450 was built across 2014 to 2018, the same window Accossato lists for the DSM01 against this bike. The part also covers the FC 250, the FE 350 and the TE 250 among the wider group of related Husqvarna models Accossato lists for this code. Checking a specific FC 450's build year against the application list before ordering is, as always, worth the extra minute.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eNo German ABE is on file for the DSM01, so Accossato lists it for off-road and competition use rather than for use on public roads.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eThis listing covers one pair of rear wheel spacers, left and right, in the colour you choose from the options above.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: Off-road rear wheel spacers\u003c\/li\u003e\n\u003cli\u003ePart number: DSM01\u003c\/li\u003e\n\u003cli\u003eColours: Silver, orange\u003c\/li\u003e\n\u003cli\u003eUse: Off-road (enduro, motocross)\u003c\/li\u003e\n\u003cli\u003eFitment: Husqvarna FC 450 (2014–2018)\u003c\/li\u003e\n\u003cli\u003eCheck: Compare with the application list before ordering\u003c\/li\u003e\n\u003cli\u003eRoad approval: None documented, off-road and competition use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Accossato","offers":[{"title":"Silver","offer_id":53900725190922,"sku":"DSM01T","price":37.68,"currency_code":"EUR","in_stock":true},{"title":"Orange","offer_id":53900725223690,"sku":"DSM01A","price":37.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/DSM01_silver_48d60c92-567c-4ce2-b102-3d62a8dabc04.png?v=1791822389"},{"product_id":"accossato-offroad-rear-wheel-spacers-husqvarna-fe-250-2014-2020-dsm01","title":"Accossato Offroad Rear Wheel Spacers Husqvarna FE 250 (2014-2020) – DSM01","description":"\u003cp\u003eThe Husqvarna FE 250 is part of Husqvarna's four-stroke enduro range, built for trail and cross-country riding rather than stadium motocross starts. Accossato lists its DSM01 rear wheel spacer pair for the FE 250 built between 2014 and 2020, sitting either side of the rear hub and dropping free the moment the wheel comes out on the trail.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRear wheel spacer pair for the Husqvarna FE 250, 2014 to 2020\u003c\/li\u003e\n\u003cli\u003eAccossato code DSM01, fitted left and right of the rear hub\u003c\/li\u003e\n\u003cli\u003eDrops free of the hub the moment the rear wheel is removed\u003c\/li\u003e\n\u003cli\u003eAvailable in orange or silver\u003c\/li\u003e\n\u003cli\u003eSame part also listed for the Husqvarna FE 450, FC 350 and TX 125\u003c\/li\u003e\n\u003cli\u003eNo German ABE on file; built for off-road and competition use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConstruction and Material Quality\u003c\/h2\u003e\n\u003cp\u003eAccossato's DSM01 spacer for the FE 250 comes in orange or silver and is listed by name for this bike; the same part is also listed for a group of related Husqvarna four-strokes. Colour is the only decision involved, and it has no effect on fit. A spacer picked up out of long grass after a trail ride and found to be cracked or out of shape is one to leave out rather than refit, since Accossato's information stops at colour, fitment and build years.\u003c\/p\u003e\n\u003ch2\u003eThe Part That Disappears in the Undergrowth\u003c\/h2\u003e\n\u003cp\u003ePulling a rear wheel on an enduro bike rarely happens on a clean workshop bench; more often it is at the side of a trail, in long grass, or on wet ground after a puncture or a chain problem, with the spacers coming free the instant the wheel clears the swingarm. A small orange or silver spacer dropped onto mud or undergrowth in that setting is genuinely easy to lose, and searching for it while the light is going is not how anyone wants to spend the last part of a ride. Putting both spacers straight into a pocket or a tool roll the moment the wheel is out, rather than setting them down on the ground even briefly, is the simplest way to avoid that search altogether.\u003c\/p\u003e\n\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\n\u003cp\u003eHusqvarna built the FE 250 across 2014 to 2020, the window Accossato lists for the DSM01 against this bike. The same part also covers the FE 450, the FC 350 and the TX 125, part of the wider group of related Husqvarna models Accossato lists for this code. A given FE 250's exact build year is still worth checking against the application list before ordering.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eNo German ABE is on file for the DSM01, so Accossato lists it for off-road and competition use rather than for use on public roads.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eThis listing covers one pair of rear wheel spacers, left and right, in the colour you choose from the options above.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: Off-road rear wheel spacers\u003c\/li\u003e\n\u003cli\u003ePart number: DSM01\u003c\/li\u003e\n\u003cli\u003eColours: Silver, orange\u003c\/li\u003e\n\u003cli\u003eUse: Off-road (enduro, motocross)\u003c\/li\u003e\n\u003cli\u003eFitment: Husqvarna FE 250 (2014–2020)\u003c\/li\u003e\n\u003cli\u003eCheck: Compare with the application list before ordering\u003c\/li\u003e\n\u003cli\u003eRoad approval: None documented, off-road and competition use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Accossato","offers":[{"title":"Silver","offer_id":53900725256458,"sku":"DSM01T","price":37.68,"currency_code":"EUR","in_stock":true},{"title":"Orange","offer_id":53900725289226,"sku":"DSM01A","price":37.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/DSM01_silver_79d13cc9-ddb7-44e7-ac51-c99405215870.png?v=1791822399"},{"product_id":"accossato-offroad-rear-wheel-spacers-husqvarna-fe-350-2014-2020-dsm01","title":"Accossato Offroad Rear Wheel Spacers Husqvarna FE 350 (2014-2020) – DSM01","description":"\u003cp\u003eThe Husqvarna FE 350 is part of Husqvarna's four-stroke enduro range, built to cover rough off-road terrain rather than a prepared motocross track. Accossato lists its DSM01 rear wheel spacer pair for the FE 350 built between 2014 and 2020, sitting either side of the rear hub where a hard fall is just as likely to disturb it as a routine wheel change.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRear wheel spacer pair for the Husqvarna FE 350, 2014 to 2020\u003c\/li\u003e\n\u003cli\u003eAccossato code DSM01, fitted left and right of the rear hub\u003c\/li\u003e\n\u003cli\u003eKeeps the rear wheel seated correctly between the hub and swingarm\u003c\/li\u003e\n\u003cli\u003eAvailable in orange or silver\u003c\/li\u003e\n\u003cli\u003eSame part also listed for the Husqvarna FE 501, FC 450 and TE 125\u003c\/li\u003e\n\u003cli\u003eNo German ABE on file; built for off-road and competition use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConstruction and Material Quality\u003c\/h2\u003e\n\u003cp\u003eWhichever finish is chosen, orange or silver, the DSM01 fitted to the FE 350 is the part Accossato names for this bike, and it lists the same part for a defined set of related Husqvarna models. Judging a spacer after any hard knock comes down to a straightforward visual check: one that looks bent, chipped or no longer sits flush against the hub is worth putting aside rather than trusted back on.\u003c\/p\u003e\n\u003ch2\u003eWhat to Check After a Hard Fall\u003c\/h2\u003e\n\u003cp\u003eEnduro riding on a bike like the FE 350 puts the rear wheel through rock strikes, dropped bikes on uneven ground and the occasional hard crash that a stadium motocross track rarely produces in the same way. None of that is reason to pull the bike apart after every off, but a fall that lands squarely on one side of the rear wheel is worth a proper look rather than a shrug and a ride home. Taking the wheel out, checking the spacers sit square and show no sign of being driven out of shape, and only then putting the bike back together, catches a problem while it is still a five-minute job rather than a stranded ride further down the trail.\u003c\/p\u003e\n\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\n\u003cp\u003eProduction of the FE 350 ran from 2014 to 2020, and that is the window Accossato lists for the DSM01 against this bike. The same part is also listed for the FE 501, the FC 450 and the TE 125, among the wider Husqvarna group Accossato covers for this code. Before ordering, it remains worth matching a specific FE 350's build year to Accossato's own list.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eNo German ABE is on file for the DSM01, so Accossato lists it for off-road and competition use rather than for use on public roads.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eThis listing covers one pair of rear wheel spacers, left and right, in the colour you choose from the options above.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: Off-road rear wheel spacers\u003c\/li\u003e\n\u003cli\u003ePart number: DSM01\u003c\/li\u003e\n\u003cli\u003eColours: Silver, orange\u003c\/li\u003e\n\u003cli\u003eUse: Off-road (enduro, motocross)\u003c\/li\u003e\n\u003cli\u003eFitment: Husqvarna FE 350 (2014–2020)\u003c\/li\u003e\n\u003cli\u003eCheck: Compare with the application list before ordering\u003c\/li\u003e\n\u003cli\u003eRoad approval: None documented, off-road and competition use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Accossato","offers":[{"title":"Silver","offer_id":53900725321994,"sku":"DSM01T","price":37.68,"currency_code":"EUR","in_stock":true},{"title":"Orange","offer_id":53900725354762,"sku":"DSM01A","price":37.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/DSM01_silver_2674498c-b5db-4ad0-a1d1-bc04d624e310.png?v=1791822408"},{"product_id":"accossato-offroad-rear-wheel-spacers-husqvarna-fe-450-2014-2020-dsm01","title":"Accossato Offroad Rear Wheel Spacers Husqvarna FE 450 (2014-2020) – DSM01","description":"\u003cp\u003eThe Husqvarna FE 450 is the larger-engined member of Husqvarna's four-stroke enduro range, built for off-road riding and cross-country competition. Accossato lists its DSM01 rear wheel spacer pair for the FE 450 built between 2014 and 2020, fitted either side of the rear hub as a defined, listed replacement rather than a guessed-at fit.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRear wheel spacer pair for the Husqvarna FE 450, 2014 to 2020\u003c\/li\u003e\n\u003cli\u003eAccossato code DSM01, fitted left and right of the rear hub\u003c\/li\u003e\n\u003cli\u003eKeeps the rear wheel seated correctly between the hub and swingarm\u003c\/li\u003e\n\u003cli\u003eAvailable in orange or silver\u003c\/li\u003e\n\u003cli\u003eSame part also listed for the Husqvarna FE 250, TC 125 and TE 300\u003c\/li\u003e\n\u003cli\u003eNo German ABE on file; built for off-road and competition use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConstruction and Material Quality\u003c\/h2\u003e\n\u003cp\u003eThe DSM01's two finishes, orange and silver, are purely a matter of preference on the FE 450; Accossato lists the same part for a wider family of related Husqvarna bikes. A spacer that has taken a solid knock and no longer sits flush deserves replacing rather than trusting back onto the bike, and a look at the hub seal on that side costs little extra time while things are already apart.\u003c\/p\u003e\n\u003ch2\u003eA Sensible Alternative to the Original Part\u003c\/h2\u003e\n\u003cp\u003eOwners of an FE 450 looking to replace a tired or lost rear wheel spacer have the choice of hunting down the original Husqvarna part through a dealer or turning to a listed aftermarket equivalent built to the same fitment. Accossato's DSM01 is the latter, listed by name for the FE 450 on Accossato's application list and sold in the same orange or silver options rather than a mismatched finish. For a part this small, often needed in a hurry after it has already gone missing, having a straightforward aftermarket option on hand saves waiting on a dealer order to get the bike back together.\u003c\/p\u003e\n\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\n\u003cp\u003eAccossato's application list puts the FE 450 at 2014 to 2020 for the DSM01, matching the years given here. The same spacer pair is also listed for the FE 250, the TC 125 and the TE 300, part of the broader Husqvarna group Accossato covers for this code. As always, a specific FE 450's build year is worth checking against the list before paying.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eNo German ABE is on file for the DSM01, so Accossato lists it for off-road and competition use rather than for use on public roads.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eThis listing covers one pair of rear wheel spacers, left and right, in the colour you choose from the options above.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: Off-road rear wheel spacers\u003c\/li\u003e\n\u003cli\u003ePart number: DSM01\u003c\/li\u003e\n\u003cli\u003eColours: Silver, orange\u003c\/li\u003e\n\u003cli\u003eUse: Off-road (enduro, motocross)\u003c\/li\u003e\n\u003cli\u003eFitment: Husqvarna FE 450 (2014–2020)\u003c\/li\u003e\n\u003cli\u003eCheck: Compare with the application list before ordering\u003c\/li\u003e\n\u003cli\u003eRoad approval: None documented, off-road and competition use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Accossato","offers":[{"title":"Silver","offer_id":53900725551370,"sku":"DSM01T","price":37.68,"currency_code":"EUR","in_stock":true},{"title":"Orange","offer_id":53900725616906,"sku":"DSM01A","price":37.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/DSM01_silver_f4729c00-4015-4591-91a1-843dd87523a0.png?v=1791822418"},{"product_id":"accossato-offroad-rear-wheel-spacers-husqvarna-fe-501-2014-2020-dsm01","title":"Accossato Offroad Rear Wheel Spacers Husqvarna FE 501 (2014-2020) – DSM01","description":"\u003cp\u003eThe Husqvarna FE 501 is the largest-displacement model in Husqvarna's four-stroke enduro range, built for off-road riding. Accossato lists its DSM01 rear wheel spacer pair for the FE 501 built between 2014 and 2020, sitting either side of the rear hub regardless of which colour is chosen.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRear wheel spacer pair for the Husqvarna FE 501, 2014 to 2020\u003c\/li\u003e\n\u003cli\u003eAccossato code DSM01, fitted left and right of the rear hub\u003c\/li\u003e\n\u003cli\u003eKeeps the rear wheel seated correctly between the hub and swingarm\u003c\/li\u003e\n\u003cli\u003eAvailable in orange or silver\u003c\/li\u003e\n\u003cli\u003eSame part also listed for the Husqvarna FE 350, FC 250 and TC 250\u003c\/li\u003e\n\u003cli\u003eNo German ABE on file; built for off-road and competition use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConstruction and Material Quality\u003c\/h2\u003e\n\u003cp\u003eOn the FE 501, the DSM01 is offered in orange or silver and named for this bike on Accossato's list, which gives the same part for several related Husqvarna four-strokes, though not for every model in the range. There is nothing beyond colour, fitment and build years in Accossato's own description of the part, so a spacer that has clearly taken a knock is one to retire rather than keep guessing about.\u003c\/p\u003e\n\u003ch2\u003eOrange or Silver, a Straightforward Choice\u003c\/h2\u003e\n\u003cp\u003eUnlike most of the parts Accossato lists for Husqvarna's off-road range, the DSM01 comes in two finishes rather than one, and the choice between orange and silver on an FE 501 is simply down to what looks right against the rest of the bike rather than anything functional. A rider who has already matched other small parts to one colour or the other has a straightforward decision to make here, and one who has not can pick whichever sits better next to the bike's own bodywork. Either way, the spacer does the same job underneath, out of sight once the wheel is back in.\u003c\/p\u003e\n\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe FE 501 was built from 2014 to 2020, matching the window Accossato lists for the DSM01 against this bike. The same part also covers the FE 350, the FC 250 and the TC 250, among the wider Husqvarna group Accossato lists for this code. Checking a given FE 501's exact build year against the application list remains the sensible step before ordering.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eNo German ABE is on file for the DSM01, so Accossato lists it for off-road and competition use rather than for use on public roads.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eThis listing covers one pair of rear wheel spacers, left and right, in the colour you choose from the options above.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: Off-road rear wheel spacers\u003c\/li\u003e\n\u003cli\u003ePart number: DSM01\u003c\/li\u003e\n\u003cli\u003eColours: Silver, orange\u003c\/li\u003e\n\u003cli\u003eUse: Off-road (enduro, motocross)\u003c\/li\u003e\n\u003cli\u003eFitment: Husqvarna FE 501 (2014–2020)\u003c\/li\u003e\n\u003cli\u003eCheck: Compare with the application list before ordering\u003c\/li\u003e\n\u003cli\u003eRoad approval: None documented, off-road and competition use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Accossato","offers":[{"title":"Silver","offer_id":53900725813514,"sku":"DSM01T","price":37.68,"currency_code":"EUR","in_stock":true},{"title":"Orange","offer_id":53900725846282,"sku":"DSM01A","price":37.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/DSM01_silver_f5382540-2cac-4caa-b7cc-d03273d65253.png?v=1791822428"},{"product_id":"accossato-offroad-rear-wheel-spacers-husqvarna-tc-125-2014-2018-dsm01","title":"Accossato Offroad Rear Wheel Spacers Husqvarna TC 125 (2014-2018) – DSM01","description":"\u003cp\u003eThe Husqvarna TC 125 is part of Husqvarna's two-stroke motocross range, a machine many riders use as the step into full motocross racing. Accossato lists its DSM01 rear wheel spacer pair for the TC 125 built between 2014 and 2018, fitted either side of the rear hub exactly as it is on Husqvarna's four-stroke models.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRear wheel spacer pair for the Husqvarna TC 125, 2014 to 2018\u003c\/li\u003e\n\u003cli\u003eAccossato code DSM01, fitted left and right of the rear hub\u003c\/li\u003e\n\u003cli\u003eKeeps the rear wheel seated correctly between the hub and swingarm\u003c\/li\u003e\n\u003cli\u003eAvailable in orange or silver\u003c\/li\u003e\n\u003cli\u003eSame part also listed for the Husqvarna TC 250, FE 450 and TE 250\u003c\/li\u003e\n\u003cli\u003eNo German ABE on file; built for off-road and competition use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConstruction and Material Quality\u003c\/h2\u003e\n\u003cp\u003eThe two-stroke TC 125 takes the same DSM01 spacer Accossato lists for its four-stroke Husqvarna relatives, listed for the TC 125 by name even though the engine type differs. Orange or silver covers the available finishes, with no bearing on fit. A spacer showing any damage after hard use, whether bent, chipped or no longer sitting flush, is simpler to replace than to keep trusting, and a quick check of the seal on that side is worth doing at the same time.\u003c\/p\u003e\n\u003ch2\u003eThe Last Look Before the Gate Drops\u003c\/h2\u003e\n\u003cp\u003eA two-stroke motocross machine like the TC 125 gets walked around more than once in the minutes before a gate drops, chain tension checked, tyre pressure confirmed, and for many riders a quick look at the rear wheel to be sure nothing has worked loose since the last moto. The rear wheel spacers are not something anyone wants to be thinking about once the gate is up, so that last look is really about confirming a job already done properly rather than fixing anything on the spot. Doing the thorough check in the pits beforehand, rather than at the gate under time pressure, is what turns that final glance into a formality instead of a scramble.\u003c\/p\u003e\n\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\n\u003cp\u003eHusqvarna built the TC 125 across 2014 to 2018, the window Accossato lists for the DSM01 against this bike. The same part also covers the TC 250, the FE 450 and the TE 250, part of the wider Husqvarna group Accossato covers for this code. Confirming a specific TC 125's build year against the application list before ordering remains worth doing.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eNo German ABE is on file for the DSM01, so Accossato lists it for off-road and competition use rather than for use on public roads.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eThis listing covers one pair of rear wheel spacers, left and right, in the colour you choose from the options above.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: Off-road rear wheel spacers\u003c\/li\u003e\n\u003cli\u003ePart number: DSM01\u003c\/li\u003e\n\u003cli\u003eColours: Silver, orange\u003c\/li\u003e\n\u003cli\u003eUse: Off-road (enduro, motocross)\u003c\/li\u003e\n\u003cli\u003eFitment: Husqvarna TC 125 (2014–2018)\u003c\/li\u003e\n\u003cli\u003eCheck: Compare with the application list before ordering\u003c\/li\u003e\n\u003cli\u003eRoad approval: None documented, off-road and competition use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Accossato","offers":[{"title":"Silver","offer_id":53900725911818,"sku":"DSM01T","price":37.68,"currency_code":"EUR","in_stock":true},{"title":"Orange","offer_id":53900725977354,"sku":"DSM01A","price":37.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/DSM01_silver_e025769f-60aa-4bc8-8b1a-1f478731808c.png?v=1791822438"},{"product_id":"accossato-offroad-rear-wheel-spacers-husqvarna-tc-250-2014-2018-dsm01","title":"Accossato Offroad Rear Wheel Spacers Husqvarna TC 250 (2014-2018) – DSM01","description":"\u003cp\u003eThe Husqvarna TC 250 is the larger of Husqvarna's two two-stroke motocross machines, raced in the premier two-stroke class rather than the smaller 125 category. Accossato lists its DSM01 rear wheel spacer pair for the TC 250 built between 2014 and 2018, fitted either side of the rear hub on a bike many riders step up to from the TC 125.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRear wheel spacer pair for the Husqvarna TC 250, 2014 to 2018\u003c\/li\u003e\n\u003cli\u003eAccossato code DSM01, fitted left and right of the rear hub\u003c\/li\u003e\n\u003cli\u003eKeeps the rear wheel seated correctly between the hub and swingarm\u003c\/li\u003e\n\u003cli\u003eAvailable in orange or silver\u003c\/li\u003e\n\u003cli\u003eSame part also listed for the Husqvarna TC 125, FC 350 and FE 501\u003c\/li\u003e\n\u003cli\u003eNo German ABE on file; built for off-road and competition use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConstruction and Material Quality\u003c\/h2\u003e\n\u003cp\u003eAccossato treats the two-stroke TC 250 the same way as its four-stroke Husqvarna siblings for this part, fitting the DSM01 to this bike's rear hub and offering it in orange or silver. The colour decision changes nothing about how it seats. A spacer that has been knocked out of shape is worth swapping rather than reinstalling, and cleaning the axle and greasing it to Husqvarna's own figure before refitting is the other half of the same job.\u003c\/p\u003e\n\u003ch2\u003eMoving Up to the Premier Two-Stroke Class\u003c\/h2\u003e\n\u003cp\u003eRiders stepping up to the TC 250 from a smaller two-stroke are often learning a faster bike's habits at the same time as everything else about racing it, including how it behaves in the opening laps once the gate drops. Spending time on the small jobs around the bike, including a rear wheel pulled and refitted a few times simply to get familiar with it, builds the kind of confidence that pays off once the pressure of an actual race weekend arrives. A rider who already knows exactly how the rear wheel and its spacers go back together is not learning that under time pressure in the pits.\u003c\/p\u003e\n\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe TC 250 was built from 2014 to 2018, matching the window Accossato lists for the DSM01 against this bike. The same part also covers the TC 125, the FC 350 and the FE 501, among the wider Husqvarna group Accossato lists for this code. As with any Accossato part, a specific TC 250's build year is worth confirming against the application list before ordering.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eNo German ABE is on file for the DSM01, so Accossato lists it for off-road and competition use rather than for use on public roads.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eThis listing covers one pair of rear wheel spacers, left and right, in the colour you choose from the options above.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: Off-road rear wheel spacers\u003c\/li\u003e\n\u003cli\u003ePart number: DSM01\u003c\/li\u003e\n\u003cli\u003eColours: Silver, orange\u003c\/li\u003e\n\u003cli\u003eUse: Off-road (enduro, motocross)\u003c\/li\u003e\n\u003cli\u003eFitment: Husqvarna TC 250 (2014–2018)\u003c\/li\u003e\n\u003cli\u003eCheck: Compare with the application list before ordering\u003c\/li\u003e\n\u003cli\u003eRoad approval: None documented, off-road and competition use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Accossato","offers":[{"title":"Silver","offer_id":53900726010122,"sku":"DSM01T","price":37.68,"currency_code":"EUR","in_stock":true},{"title":"Orange","offer_id":53900726042890,"sku":"DSM01A","price":37.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/DSM01_silver_ab78f2c9-3894-4d19-8077-d7e1288f052c.png?v=1791822448"},{"product_id":"accossato-offroad-rear-wheel-spacers-husqvarna-te-125-2014-2016-dsm01","title":"Accossato Offroad Rear Wheel Spacers Husqvarna TE 125 (2014-2016) – DSM01","description":"\u003cp\u003eHusqvarna's TE 125 is the smallest two-stroke in the brand's enduro range, a bike many riders use to learn technical trail riding before stepping up to something bigger. Accossato lists its DSM01 rear wheel spacers for the TE 125 built in 2014, 2015 and 2016, the two sleeves that sit either side of the rear hub and take up the gap between the hub and the swingarm or axle block.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRear wheel spacers for the Husqvarna TE 125, 2014 to 2016\u003c\/li\u003e\n\u003cli\u003eAccossato code DSM01, one spacer each side of the rear hub\u003c\/li\u003e\n\u003cli\u003eSold as a pair, left and right, as shown\u003c\/li\u003e\n\u003cli\u003eAvailable in orange or silver\u003c\/li\u003e\n\u003cli\u003eSame part also listed for the Husqvarna TE 250, the Husqvarna FE 450 and the Husqvarna FC 450\u003c\/li\u003e\n\u003cli\u003eNo German ABE on file; built for off-road and competition riding\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConstruction and Material Quality\u003c\/h2\u003e\n\u003cp\u003eAccossato ties the DSM01 to the TE 125 by model and build year, not to any stated material, weight or measurement for the part. Orange and silver are simply the two finishes Accossato offers; neither changes how the spacer holds the wheel in line. A spacer that has picked up a dent or a flattened edge from being dropped onto stony ground is worth setting next to its opposite number before refitting, since the two should still look and seat the same way.\u003c\/p\u003e\n\u003ch2\u003eChanging the Rear Wheel in the Pit Lane\u003c\/h2\u003e\n\u003cp\u003eEnduro events are often run to a format where riders carry a spare rear wheel, already fitted with a fresh tyre, ready to swap at a service point rather than changing a tyre on the trail itself. Pulling the axle at speed in a pit lane means both spacers come free the moment the wheel does, and with marshals calling out times and a queue building behind, a spacer that drops into gravel or long grass is easy to lose track of. Riders who do this regularly tend to set the spacers down in the same spot every time, often straight onto a rag or into a pocket, so the swap can be finished without a search through the grass. Noting which side each spacer came from before refitting the new wheel keeps the job quick rather than turning it into a guessing game once the bike is back together and the clock is still running.\u003c\/p\u003e\n\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\n\u003cp\u003eAccossato's own application list names the TE 125 for 2014 to 2016 against the DSM01, matching the years given here. The same pair of spacers appears elsewhere on that list for the TE 250, the FE 450 and the FC 450. Checking the TE 125's exact build year against the application list before ordering remains worth doing, since Accossato groups several closely related models around this one part number.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eNo German ABE is on file for the DSM01, so Accossato lists it for off-road and competition use rather than road riding. Anyone racing under a particular series' rules should check that series' own technical regulations before fitting aftermarket spacers.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eOne pair of DSM01 rear wheel spacers, left and right, in the chosen colour.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: Off-road rear wheel spacers\u003c\/li\u003e\n\u003cli\u003ePart number: DSM01\u003c\/li\u003e\n\u003cli\u003eColours: Silver, orange\u003c\/li\u003e\n\u003cli\u003eUse: Off-road (enduro, motocross)\u003c\/li\u003e\n\u003cli\u003eFitment: Husqvarna TE 125 (2014–2016)\u003c\/li\u003e\n\u003cli\u003eCheck: Compare with the application list before ordering\u003c\/li\u003e\n\u003cli\u003eRoad approval: None documented, off-road and competition use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Accossato","offers":[{"title":"Silver","offer_id":53900726468874,"sku":"DSM01T","price":37.68,"currency_code":"EUR","in_stock":true},{"title":"Orange","offer_id":53900726501642,"sku":"DSM01A","price":37.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/DSM01_silver_2abd63b3-b122-4431-950c-4fce9725a43c.png?v=1791822474"},{"product_id":"accossato-offroad-rear-wheel-spacers-husqvarna-te-250-2014-2018-dsm01","title":"Accossato Offroad Rear Wheel Spacers Husqvarna TE 250 (2014-2018) – DSM01","description":"\u003cp\u003eThe TE 250 sits in the middle of Husqvarna's two-stroke enduro range, giving up a little of the TE 125's lightness for the extra pull that technical going and longer days in the saddle reward. Accossato's DSM01 rear wheel spacers cover the TE 250 across 2014 to 2018, which takes in both the standard model and the injected TE 250i built from 2016; the pair sits either side of the rear hub, filling the gap between the hub and the swingarm or axle block so the wheel runs true.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRear wheel spacers for the Husqvarna TE 250, 2014 to 2018\u003c\/li\u003e\n\u003cli\u003eAccossato code DSM01, covers the standard TE 250 and the injected TE 250i\u003c\/li\u003e\n\u003cli\u003eOne spacer on each side of the rear hub, sold as a pair\u003c\/li\u003e\n\u003cli\u003eAvailable in orange or silver\u003c\/li\u003e\n\u003cli\u003eSame part also listed for the Husqvarna TE 125, the TC 250 and the FE 501\u003c\/li\u003e\n\u003cli\u003eNo German ABE on file; built for off-road and competition riding\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConstruction and Material Quality\u003c\/h2\u003e\n\u003cp\u003eFor the TE 250, Accossato names the DSM01 against model and build years alone; no material, weight or measurement for the spacer itself is given. Choosing orange or silver only changes the finish; it has no bearing on how well the spacer holds the wheel in line. Before a spacer goes back in after time off the bike, holding it next to the one that came off the other side is a quick way to spot a crack or a flattened edge that would otherwise go unnoticed until the wheel starts to move.\u003c\/p\u003e\n\u003ch2\u003eSwapping a Tyre After the Chequered Flag\u003c\/h2\u003e\n\u003cp\u003eOnce a race or a long trail day finishes, pulling the rear wheel to fit a fresh tyre is often the first job back at the van, usually with the light fading and everyone keen to get packed up and moving. Both spacers come away with the wheel as soon as the axle clears the swingarm, and a tired rider working quickly in failing light is exactly the sort of combination that leaves one sitting forgotten on a wheel ramp or lost in the grass beside the bike. Laying the spacers on top of the old tyre, or straight into the toolbox, while the new tyre goes on means they are still there when the wheel goes back in rather than being searched for once everything else is already packed away.\u003c\/p\u003e\n\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\n\u003cp\u003eAccossato's application list gives 2014 to 2018 for the TE 250 against the DSM01, covering both the standard bike and the TE 250i, in line with the years shown here. The same spacers are also listed for the TE 125, the TC 250 and the FE 501. Checking the exact build year of a particular TE 250 against the application list is worth doing before ordering, given how many closely related models share this one part number.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eNo German ABE is on file for the DSM01, so Accossato lists it for off-road and competition use rather than for the road. Riders entering a particular championship should check that series' own technical rules before fitting aftermarket spacers.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eOne pair of DSM01 rear wheel spacers, left and right, in the chosen colour.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: Off-road rear wheel spacers\u003c\/li\u003e\n\u003cli\u003ePart number: DSM01\u003c\/li\u003e\n\u003cli\u003eColours: Silver, orange\u003c\/li\u003e\n\u003cli\u003eUse: Off-road (enduro, motocross)\u003c\/li\u003e\n\u003cli\u003eFitment: Husqvarna TE 250 (2014–2018)\u003c\/li\u003e\n\u003cli\u003eCheck: Compare with the application list before ordering\u003c\/li\u003e\n\u003cli\u003eRoad approval: None documented, off-road and competition use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Accossato","offers":[{"title":"Silver","offer_id":53900726862090,"sku":"DSM01T","price":37.68,"currency_code":"EUR","in_stock":true},{"title":"Orange","offer_id":53900726894858,"sku":"DSM01A","price":37.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/DSM01_silver_0c96ceee-b1c9-451b-8bb2-7f3011013511.png?v=1791822484"},{"product_id":"accossato-offroad-rear-wheel-spacers-husqvarna-te-300-2014-2020-dsm01","title":"Accossato Offroad Rear Wheel Spacers Husqvarna TE 300 (2014-2020) – DSM01","description":"\u003cp\u003eThe TE 300 is the biggest two-stroke in Husqvarna's enduro line, built for riders who want strong, easy drive out of slow corners and up steep, loose climbs rather than an engine that needs working hard to go fast. Accossato lists its DSM01 rear wheel spacers for the TE 300 across 2014 to 2020, which also takes in the fuel-injected TE 300i built in 2018; the two sleeves sit either side of the rear hub, taking up the space between the hub and the swingarm or axle block.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRear wheel spacers for the Husqvarna TE 300, 2014 to 2020\u003c\/li\u003e\n\u003cli\u003eAccossato code DSM01, covers the standard TE 300 and the injected TE 300i\u003c\/li\u003e\n\u003cli\u003eOne spacer each side of the rear hub, sold as a pair\u003c\/li\u003e\n\u003cli\u003eAvailable in orange or silver\u003c\/li\u003e\n\u003cli\u003eSame part also listed for the Husqvarna TE 125, the FC 450 and the TX 125\u003c\/li\u003e\n\u003cli\u003eNo German ABE on file; built for off-road and competition riding\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConstruction and Material Quality\u003c\/h2\u003e\n\u003cp\u003eAccossato's listing for the TE 300 identifies the DSM01 by model and build years, without stating a material, weight or measurement for the spacer. Orange and silver are cosmetic choices only; they make no difference to how the spacer sits against the hub. A spacer that has come loose and gone missing, or that shows a crack after being knocked about, is worth replacing as a pair rather than running one new part against one worn one.\u003c\/p\u003e\n\u003ch2\u003eA Spacer Lost in the Mud\u003c\/h2\u003e\n\u003cp\u003ePulling a wheel on a bike that has just come in from a wet, muddy loop means handling parts that are already caked in grit, and a small spacer set down on the ground beside the bike can disappear into churned-up mud almost as soon as it is put down. Riders who change a wheel or check the chain line out on the trail, rather than back at the van, often find this is where a spacer actually goes missing, since there is no clean bench to set it on and nowhere obvious to put it down. Dropping both spacers straight into a pocket, or onto a clean rag carried just for this job, as soon as the wheel comes free avoids the search through mud that follows once one has been set down and lost from sight.\u003c\/p\u003e\n\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\n\u003cp\u003eAccossato's application list names the TE 300 for 2014 to 2020 against the DSM01, which also covers the TE 300i built in 2018, matching the years given here. The same pair is also listed for the TE 125, the FC 450 and the TX 125. Checking a particular TE 300's build year against the application list before ordering is worth doing, since Accossato groups several related models under this one part number.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eNo German ABE is on file for the DSM01, so Accossato lists it for off-road and competition use. Riders should check their own series' technical regulations before fitting aftermarket spacers for competition.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eOne pair of DSM01 rear wheel spacers, left and right, in the chosen colour.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: Off-road rear wheel spacers\u003c\/li\u003e\n\u003cli\u003ePart number: DSM01\u003c\/li\u003e\n\u003cli\u003eColours: Silver, orange\u003c\/li\u003e\n\u003cli\u003eUse: Off-road (enduro, motocross)\u003c\/li\u003e\n\u003cli\u003eFitment: Husqvarna TE 300 (2014–2020)\u003c\/li\u003e\n\u003cli\u003eCheck: Compare with the application list before ordering\u003c\/li\u003e\n\u003cli\u003eRoad approval: None documented, off-road and competition use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Accossato","offers":[{"title":"Silver","offer_id":53900727025930,"sku":"DSM01T","price":37.68,"currency_code":"EUR","in_stock":true},{"title":"Orange","offer_id":53900727976202,"sku":"DSM01A","price":37.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/DSM01_silver_0525805f-483f-486d-b78b-0c78ded499e6.png?v=1791822494"},{"product_id":"accossato-offroad-rear-wheel-spacers-husqvarna-tx-125-2017-2018-dsm01","title":"Accossato Offroad Rear Wheel Spacers Husqvarna TX 125 (2017-2018) – DSM01","description":"\u003cp\u003eThe TX 125 is Husqvarna's cross-country version of its small two-stroke motocross model, built for looping cross-country courses rather than a single motocross track. Accossato lists its DSM01 rear wheel spacers for the TX 125 built in 2017 and 2018, the pair of sleeves fitted either side of the rear hub that take up the space between the hub and the swingarm or axle block.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRear wheel spacers for the Husqvarna TX 125, 2017 and 2018\u003c\/li\u003e\n\u003cli\u003eAccossato code DSM01, one spacer each side of the rear hub\u003c\/li\u003e\n\u003cli\u003eSold as a pair, left and right\u003c\/li\u003e\n\u003cli\u003eAvailable in orange or silver\u003c\/li\u003e\n\u003cli\u003eSame part also listed for the Husqvarna TC 125, the FE 350 and the TE 250\u003c\/li\u003e\n\u003cli\u003eNo German ABE on file; built for off-road and competition riding\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConstruction and Material Quality\u003c\/h2\u003e\n\u003cp\u003eEach spacer sits one to a side of the rear hub, between the hub and the swingarm or axle block, and doing both at once rather than leaving one for later keeps the wheel properly located on both sides. Orange and silver are simply the two finishes on offer; neither affects how firmly the spacer locates the wheel. A spacer that looks pushed out of shape, or that no longer sits flush once refitted, is worth comparing against a known good spacer rather than trusted on sight alone.\u003c\/p\u003e\n\u003ch2\u003eChecking the Spacers Before the Season Starts\u003c\/h2\u003e\n\u003cp\u003eCross-country racing runs through a long season of closely spaced events, and a TX 125 that has sat over winter after a hard previous season is worth going over properly rather than simply refuelling and riding to the first round. Pulling the rear wheel as part of that check is a natural moment to look at both spacers, since they rarely get attention unless the wheel is already out for a tyre or a bearing. A spacer that has been quietly flattened or chipped over a season of racing is easy to miss if the wheel never comes off for its own sake, which is exactly why a proper pre-season strip-down tends to catch things a quick glance would not.\u003c\/p\u003e\n\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\n\u003cp\u003eAccossato's application list gives 2017 and 2018 for the TX 125 against the DSM01, matching the years shown here. The same spacers are also listed for the TC 125, the FE 350 and the TE 250. Confirming a particular TX 125's build year against the application list is worth doing before ordering, since several related Husqvarna models sit under this one part number.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eNo German ABE is on file for the DSM01, so Accossato lists it for off-road and competition use rather than road riding. Riders competing in a particular series should check that series' technical regulations before fitting aftermarket spacers.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eOne pair of DSM01 rear wheel spacers, left and right, in the chosen colour.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: Off-road rear wheel spacers\u003c\/li\u003e\n\u003cli\u003ePart number: DSM01\u003c\/li\u003e\n\u003cli\u003eColours: Silver, orange\u003c\/li\u003e\n\u003cli\u003eUse: Off-road (enduro, motocross)\u003c\/li\u003e\n\u003cli\u003eFitment: Husqvarna TX 125 (2017–2018)\u003c\/li\u003e\n\u003cli\u003eCheck: Compare with the application list before ordering\u003c\/li\u003e\n\u003cli\u003eRoad approval: None documented, off-road and competition use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Accossato","offers":[{"title":"Silver","offer_id":53900728008970,"sku":"DSM01T","price":37.68,"currency_code":"EUR","in_stock":true},{"title":"Orange","offer_id":53900728041738,"sku":"DSM01A","price":37.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/DSM01_silver_44a95b54-3f51-4390-a38d-f721e8358fb4.png?v=1791822504"},{"product_id":"accossato-offroad-rear-wheel-spacers-ktm-125exc-2003-2018-dsm01","title":"Accossato Offroad Rear Wheel Spacers KTM 125EXC (2003-2018) – DSM01","description":"\u003cp\u003eKTM's 125 EXC has been a fixture of the brand's two-stroke enduro range for well over a decade, built in broadly the same form across that whole run even as detail changes came and went along the way. Accossato lists its DSM01 rear wheel spacers for the 125 EXC across the full 2003 to 2018 span, the pair of sleeves fitted either side of the rear hub to take up the gap between the hub and the swingarm or axle block.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRear wheel spacers for the KTM 125 EXC, 2003 to 2018\u003c\/li\u003e\n\u003cli\u003eAccossato code DSM01, one spacer each side of the rear hub\u003c\/li\u003e\n\u003cli\u003eSold as a pair, left and right\u003c\/li\u003e\n\u003cli\u003eAvailable in orange or silver\u003c\/li\u003e\n\u003cli\u003eSame part also listed for the Husqvarna FC 350, the TE 250 and the TC 250\u003c\/li\u003e\n\u003cli\u003eNo German ABE on file; built for off-road and competition riding\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConstruction and Material Quality\u003c\/h2\u003e\n\u003cp\u003eAccossato names the DSM01 against the 125 EXC's model and build years, stating no material, weight or measurement for the spacer itself. Orange or silver is a finish choice only; it changes nothing about how the spacer locates the wheel once fitted. Over a long production run like this bike's, a spacer bought secondhand or pulled from a parts bin is worth checking carefully for cracking or flattening before it is trusted back on the bike.\u003c\/p\u003e\n\u003ch2\u003eA Spare Part Instead of the Original\u003c\/h2\u003e\n\u003cp\u003eOn a bike built across as many years as the 125 EXC, an original spacer that has gone missing or worn out is not always easy to track down, especially once the dealer network has moved on to newer models and stock of older small parts starts to thin out. Ordering a replacement pair from Accossato's own application list settles the fitment question in a way that guessing from a worn, unmarked part does not, since the list ties the part directly to the model and years rather than relying on a spacer that may itself have been swapped from a different year's bike at some point. Keeping both spacers from the same pair, rather than mixing an old survivor with a new one, is a small thing that avoids introducing a mismatch that was not there originally.\u003c\/p\u003e\n\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\n\u003cp\u003eAccossato's application list names the 125 EXC across 2003 to 2018 against the DSM01, matching the years given here. The same pair of spacers is also listed for the Husqvarna FC 350, the TE 250 and the TC 250. Checking a particular 125 EXC's exact build year against the application list before ordering is worth doing, given the length of this model's production run.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eNo German ABE is on file for the DSM01, so Accossato lists it for off-road and competition use rather than road riding. Riders should check their own series' technical rules before fitting aftermarket spacers for competition.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eOne pair of DSM01 rear wheel spacers, left and right, in the chosen colour.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: Off-road rear wheel spacers\u003c\/li\u003e\n\u003cli\u003ePart number: DSM01\u003c\/li\u003e\n\u003cli\u003eColours: Silver, orange\u003c\/li\u003e\n\u003cli\u003eUse: Off-road (enduro, motocross)\u003c\/li\u003e\n\u003cli\u003eFitment: KTM 125EXC (2003–2018)\u003c\/li\u003e\n\u003cli\u003eCheck: Compare with the application list before ordering\u003c\/li\u003e\n\u003cli\u003eRoad approval: None documented, off-road and competition use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Accossato","offers":[{"title":"Silver","offer_id":53900728303882,"sku":"DSM01T","price":37.68,"currency_code":"EUR","in_stock":true},{"title":"Orange","offer_id":53900728336650,"sku":"DSM01A","price":37.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/DSM01_silver_50493bf7-f887-4dde-8be6-4b39f9dd7b65.png?v=1791822514"},{"product_id":"accossato-offroad-rear-wheel-spacers-ktm-125xc-w-2017-2019-dsm01","title":"Accossato Offroad Rear Wheel Spacers KTM 125XC-W (2017-2019) – DSM01","description":"\u003cp\u003eThe 125 XC-W is KTM's cross-country enduro version of its small two-stroke model, built for riders chasing closed-course enduro events rather than long trail rides. Accossato lists its DSM01 rear wheel spacers for the 125 XC-W built in 2017, 2018 and 2019, the pair of sleeves fitted either side of the rear hub that fill the space between the hub and the swingarm or axle block.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRear wheel spacers for the KTM 125 XC-W, 2017 to 2019\u003c\/li\u003e\n\u003cli\u003eAccossato code DSM01, one spacer each side of the rear hub\u003c\/li\u003e\n\u003cli\u003eSold as a pair, left and right\u003c\/li\u003e\n\u003cli\u003eAvailable in orange or silver\u003c\/li\u003e\n\u003cli\u003eSame part also listed for the Husqvarna TE 300, the FC 250 and the TC 125\u003c\/li\u003e\n\u003cli\u003eNo German ABE on file; built for off-road and competition riding\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConstruction and Material Quality\u003c\/h2\u003e\n\u003cp\u003eFor the 125 XC-W, the DSM01 is tied to model and build years rather than to any stated material, weight or measurement. Choosing orange or silver changes only the look; it has no effect on how the spacer holds the wheel. A spacer that has picked up a scrape or a flattened edge should be looked over properly rather than fitted again on the assumption that a knock this small cannot have done anything.\u003c\/p\u003e\n\u003ch2\u003eChecking Both Spacers After a Fall\u003c\/h2\u003e\n\u003cp\u003eA closed-course enduro section often puts the rear wheel down hard against rocks and roots as much as the rest of the bike, and a fall that looks, on the face of it, to have only bent a lever or scuffed the bars can still have caught the rear hub against something solid. Once the bike is back in the garage, pulling the rear wheel to check the spacers, rather than only looking at what is obviously bent, catches damage that would not show up again until the wheel starts moving oddly on the next ride. Setting both spacers side by side against a clean, undamaged pair makes it easier to see a dent or a flattened edge than trying to judge one spacer on its own.\u003c\/p\u003e\n\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\n\u003cp\u003eAccossato's application list gives 2017 to 2019 for the 125 XC-W against the DSM01, matching the years shown here. The same spacers are also listed for the Husqvarna TE 300, the FC 250 and the TC 125. Checking a particular 125 XC-W's exact build year against the application list before ordering remains worth doing.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eNo German ABE is on file for the DSM01, so Accossato lists it for off-road and competition use rather than road riding. Riders should check their own series' technical rules before fitting aftermarket spacers.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eOne pair of DSM01 rear wheel spacers, left and right, in the chosen colour.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: Off-road rear wheel spacers\u003c\/li\u003e\n\u003cli\u003ePart number: DSM01\u003c\/li\u003e\n\u003cli\u003eColours: Silver, orange\u003c\/li\u003e\n\u003cli\u003eUse: Off-road (enduro, motocross)\u003c\/li\u003e\n\u003cli\u003eFitment: KTM 125XC-W (2017–2019)\u003c\/li\u003e\n\u003cli\u003eCheck: Compare with the application list before ordering\u003c\/li\u003e\n\u003cli\u003eRoad approval: None documented, off-road and competition use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Accossato","offers":[{"title":"Silver","offer_id":53900728533258,"sku":"DSM01T","price":37.68,"currency_code":"EUR","in_stock":true},{"title":"Orange","offer_id":53900728566026,"sku":"DSM01A","price":37.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/DSM01_silver_4ac37fdd-f57a-4600-bab9-6b5542af6ec0.png?v=1791822533"},{"product_id":"accossato-offroad-rear-wheel-spacers-ktm-150exc-2003-2016-dsm01","title":"Accossato Offroad Rear Wheel Spacers KTM 150EXC (2003-2016) – DSM01","description":"\u003cp\u003eKTM's 150 EXC is a two-stroke enduro model fitted with a slightly larger engine than the 125 EXC, aimed at riders who want a touch more pull without stepping all the way up to the 250. Accossato lists its DSM01 rear wheel spacers for the 150 EXC built between 2003 and 2016, the pair of sleeves fitted either side of the rear hub that take up the gap between the hub and the swingarm or axle block.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRear wheel spacers for the KTM 150 EXC, 2003 to 2016\u003c\/li\u003e\n\u003cli\u003eAccossato code DSM01, one spacer each side of the rear hub\u003c\/li\u003e\n\u003cli\u003eSold as a pair, left and right\u003c\/li\u003e\n\u003cli\u003eAvailable in orange or silver\u003c\/li\u003e\n\u003cli\u003eSame part also listed for the Husqvarna FE 350, the TE 125 and the TC 250\u003c\/li\u003e\n\u003cli\u003eNo German ABE on file; built for off-road and competition riding\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConstruction and Material Quality\u003c\/h2\u003e\n\u003cp\u003eEach of the two spacers sits between the hub and the swingarm or axle block on its own side of the wheel, which is why it pays to refit them to the same side they came from rather than swap them by habit. Orange matches the bike's own colour scheme while silver gives a plainer look; the choice is purely cosmetic and changes nothing about how the spacer seats. A spacer that no longer sits flush, or that shows a crack along its edge, should be replaced rather than kept simply because it still looks close enough from a distance.\u003c\/p\u003e\n\u003ch2\u003eMatching the Spacer to the Rest of the Bike\u003c\/h2\u003e\n\u003cp\u003eRiders who keep their KTM looking tidy, rather than simply functional, often think about small details like this when a wheel comes off for other work, since an orange spacer sitting against a bike that has otherwise been left stock-coloured, or a silver one against a bike running a full orange theme, is the kind of small mismatch that stands out once noticed. Picking the finish that suits how the rest of the bike is set up is simply a matter of taste, and either option holds the wheel exactly the same way regardless of which one is chosen. Once the colour decision is made, it is worth sticking with the same finish on both sides rather than mixing one of each.\u003c\/p\u003e\n\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\n\u003cp\u003eAccossato's application list names the 150 EXC across 2003 to 2016 against the DSM01, matching the years given here. The same spacers are also listed for the Husqvarna FE 350, the TE 125 and the TC 250. Checking a particular 150 EXC's build year against the application list before ordering remains worth doing.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eNo German ABE is on file for the DSM01, so Accossato lists it for off-road and competition use rather than road riding. Riders should check their own series' technical rules before fitting aftermarket spacers.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eOne pair of DSM01 rear wheel spacers, left and right, in the chosen colour.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: Off-road rear wheel spacers\u003c\/li\u003e\n\u003cli\u003ePart number: DSM01\u003c\/li\u003e\n\u003cli\u003eColours: Silver, orange\u003c\/li\u003e\n\u003cli\u003eUse: Off-road (enduro, motocross)\u003c\/li\u003e\n\u003cli\u003eFitment: KTM 150EXC (2003–2016)\u003c\/li\u003e\n\u003cli\u003eCheck: Compare with the application list before ordering\u003c\/li\u003e\n\u003cli\u003eRoad approval: None documented, off-road and competition use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Accossato","offers":[{"title":"Silver","offer_id":53900728598794,"sku":"DSM01T","price":37.68,"currency_code":"EUR","in_stock":true},{"title":"Orange","offer_id":53900728631562,"sku":"DSM01A","price":37.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/DSM01_silver_cbad9462-c054-4489-927b-c893a5b6f339.png?v=1791822543"},{"product_id":"accossato-offroad-rear-wheel-spacers-ktm-250exc-f-2003-2018-dsm01","title":"Accossato Offroad Rear Wheel Spacers KTM 250EXC-F (2003-2018) – DSM01","description":"\u003cp\u003eKTM's 250 EXC-F is a four-stroke enduro machine built for riders who want the smoother, more tractable delivery of a four-stroke over a two-stroke's harder hit, without stepping up to a bigger-engined bike. Accossato lists its DSM01 rear wheel spacers for the 250 EXC-F across 2003 to 2018, the pair of sleeves fitted either side of the rear hub that take up the gap between the hub and the swingarm or axle block.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRear wheel spacers for the KTM 250 EXC-F, 2003 to 2018\u003c\/li\u003e\n\u003cli\u003eAccossato code DSM01, one spacer each side of the rear hub\u003c\/li\u003e\n\u003cli\u003eSold as a pair, left and right\u003c\/li\u003e\n\u003cli\u003eAvailable in orange or silver\u003c\/li\u003e\n\u003cli\u003eSame part also listed for the Husqvarna FC 450, the TE 300 and the TC 125\u003c\/li\u003e\n\u003cli\u003eNo German ABE on file; built for off-road and competition riding\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConstruction and Material Quality\u003c\/h2\u003e\n\u003cp\u003eThe DSM01 is listed for the 250 EXC-F by model and build years alone, with no material, weight or measurement stated for the spacer. Orange or silver only changes the finish; the spacer holds the wheel the same way either way. A spacer with a chip along its edge, or one that sits unevenly against the hub once refitted, should be set aside and replaced rather than forced to work for another ride.\u003c\/p\u003e\n\u003ch2\u003eA Wheel Change on a Multi-Day Event\u003c\/h2\u003e\n\u003cp\u003eMulti-day enduros often mean stripping a wheel down at the end of each stage, whether to fit a fresh tyre for the next day or simply to check the bearings and seals after hours on rough ground. Working on the bike at an overnight stop, often by headtorch with other jobs still waiting, is exactly the setting where a small part set down on a workbench or a groundsheet goes unnoticed when everything gets packed away for the night. Keeping the two spacers together in a small bag or pot that travels with the toolkit, rather than loose in a pocket that empties out during the day, means they are still there when the wheel goes back together the next morning.\u003c\/p\u003e\n\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\n\u003cp\u003eAcross the whole 2003 to 2018 run, the 250 EXC-F sits on Accossato's list against the DSM01, in line with the years quoted here. That same list carries the part across to the Husqvarna FC 450, the TE 300 and the TC 125 as well. A buyer is still well served by lining up the exact year of their own 250 EXC-F against the list before placing an order.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eNo German ABE is on file for the DSM01, so Accossato lists it for off-road and competition use rather than road riding. Riders should check their own series' technical rules before fitting aftermarket spacers.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eOne pair of DSM01 rear wheel spacers, left and right, in the chosen colour.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: Off-road rear wheel spacers\u003c\/li\u003e\n\u003cli\u003ePart number: DSM01\u003c\/li\u003e\n\u003cli\u003eColours: Silver, orange\u003c\/li\u003e\n\u003cli\u003eUse: Off-road (enduro, motocross)\u003c\/li\u003e\n\u003cli\u003eFitment: KTM 250EXC-F (2003–2018)\u003c\/li\u003e\n\u003cli\u003eCheck: Compare with the application list before ordering\u003c\/li\u003e\n\u003cli\u003eRoad approval: None documented, off-road and competition use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Accossato","offers":[{"title":"Silver","offer_id":53900728664330,"sku":"DSM01T","price":37.68,"currency_code":"EUR","in_stock":true},{"title":"Orange","offer_id":53900728697098,"sku":"DSM01A","price":37.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/DSM01_silver_89de2c38-0310-4696-9548-079350bae50a.png?v=1791822552"},{"product_id":"accossato-offroad-rear-wheel-spacers-ktm-300exc-2003-2020-dsm01","title":"Accossato Offroad Rear Wheel Spacers KTM 300EXC (2003-2020) – DSM01","description":"\u003cp\u003eThe 300 EXC is the torquiest two-stroke in KTM's enduro line-up, built to pull cleanly from low revs rather than needing to be kept spinning hard, which makes it a favourite for slow, technical going. Accossato's DSM01 rear wheel spacers cover the 300 EXC across 2003 to 2020, a span that also takes in the fuel-injected 300 EXC TPI built in 2018; each sleeve sits on one side of the rear hub, filling the space between the hub and the swingarm or axle block.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRear wheel spacers for the KTM 300 EXC, 2003 to 2020\u003c\/li\u003e\n\u003cli\u003eAccossato code DSM01, covers the standard 300 EXC and the injected 300 EXC TPI\u003c\/li\u003e\n\u003cli\u003eOne spacer each side of the rear hub, sold as a pair\u003c\/li\u003e\n\u003cli\u003eAvailable in orange or silver\u003c\/li\u003e\n\u003cli\u003eSame part also listed for the Husqvarna TE 250, the FC 350 and the TC 125\u003c\/li\u003e\n\u003cli\u003eNo German ABE on file; built for off-road and competition riding\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConstruction and Material Quality\u003c\/h2\u003e\n\u003cp\u003eFor the 300 EXC, Accossato names the DSM01 by model and build years, giving no material, weight or measurement for the spacer itself. Orange or silver is a finish decision alone, with no effect on how snugly the sleeve locates the wheel once the axle is tightened. A spacer that has split along an edge, or that no longer seats flush against the hub face, should be taken out of service rather than kept in the hope it will still hold up.\u003c\/p\u003e\n\u003ch2\u003eKeeping a Spare Pair in the Van\u003c\/h2\u003e\n\u003cp\u003eRiders who travel to events a long way from home tend to carry a small box of parts that are cheap to replace but awkward to be without, and a spare pair of rear wheel spacers fits that description well, since losing one in the field leaves the bike unrideable until a replacement turns up. Having a spare pair already in the van removes the scramble to find a dealer open on a Sunday, or to borrow a part from another rider at the same event. Keeping that spare pair in a labelled bag rather than loose among other small parts also means it is easy to find in a hurry, rather than tipped out of a box at the worst possible moment.\u003c\/p\u003e\n\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\n\u003cp\u003eAccossato's application list names the 300 EXC across 2003 to 2020 against the DSM01, which also covers the 300 EXC TPI built in 2018, matching the years given here. The same spacers are also listed for the Husqvarna TE 250, the FC 350 and the TC 125. Checking a particular 300 EXC's exact build year against the application list before ordering remains worth doing.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eNo German ABE is on file for the DSM01, so Accossato lists it for off-road and competition use rather than road riding. Riders should check their own series' technical rules before fitting aftermarket spacers.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eOne pair of DSM01 rear wheel spacers, left and right, in the chosen colour.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: Off-road rear wheel spacers\u003c\/li\u003e\n\u003cli\u003ePart number: DSM01\u003c\/li\u003e\n\u003cli\u003eColours: Silver, orange\u003c\/li\u003e\n\u003cli\u003eUse: Off-road (enduro, motocross)\u003c\/li\u003e\n\u003cli\u003eFitment: KTM 300EXC (2003–2020)\u003c\/li\u003e\n\u003cli\u003eCheck: Compare with the application list before ordering\u003c\/li\u003e\n\u003cli\u003eRoad approval: None documented, off-road and competition use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Accossato","offers":[{"title":"Silver","offer_id":53900728795402,"sku":"DSM01T","price":37.68,"currency_code":"EUR","in_stock":true},{"title":"Orange","offer_id":53900728828170,"sku":"DSM01A","price":37.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/DSM01_silver_90078d9b-4819-4b8d-a6dc-4e4994d9beb2.png?v=1791822572"},{"product_id":"accossato-offroad-rear-wheel-spacers-ktm-350exc-f-2003-2020-dsm01","title":"Accossato Offroad Rear Wheel Spacers KTM 350EXC-F (2003-2020) – DSM01","description":"\u003cp\u003eKTM's 350 EXC-F is one of the four-stroke models in the brand's EXC-F enduro range, sitting between the 250 EXC-F and the 450 EXC-F by engine size. Accossato lists its DSM01 rear wheel spacers for the 350 EXC-F across 2003 to 2020, the pair of sleeves fitted either side of the rear hub to take up the gap between the hub and the swingarm or axle block.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRear wheel spacers for the KTM 350 EXC-F, 2003 to 2020\u003c\/li\u003e\n\u003cli\u003eAccossato code DSM01, one spacer each side of the rear hub\u003c\/li\u003e\n\u003cli\u003eSold as a pair, left and right\u003c\/li\u003e\n\u003cli\u003eAvailable in orange or silver\u003c\/li\u003e\n\u003cli\u003eSame part also listed for the Husqvarna FE 450, the TC 250 and the TE 125\u003c\/li\u003e\n\u003cli\u003eNo German ABE on file; built for off-road and competition riding\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConstruction and Material Quality\u003c\/h2\u003e\n\u003cp\u003eThe DSM01 is tied to the 350 EXC-F by model and build years rather than to a stated material, weight or measurement. Orange and silver change only the appearance; both sit against the hub in exactly the same way. Before fitting either spacer back onto the bike, running a finger around its edge to feel for a chip or a flattened section catches damage that a quick glance from a distance would miss.\u003c\/p\u003e\n\u003ch2\u003eA Wheel Off for New Sprockets and Chain\u003c\/h2\u003e\n\u003cp\u003eReplacing a worn sprocket and chain means the rear wheel has to come out regardless, and once it is off the bike anyway, this is a sensible moment to look over both spacers rather than simply swap the drivetrain parts and put the wheel straight back in. A chain and sprocket set that has worn enough to need replacing has usually been throwing grit and chain lube at everything nearby for some time, including the spacers, so a quick wipe-down and inspection while the wheel is already apart costs little extra effort. Doing both jobs together also means the rear end only comes apart once rather than twice in quick succession.\u003c\/p\u003e\n\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\n\u003cp\u003eFor the 350 EXC-F, Accossato's list spans 2003 to 2020 against the DSM01, agreeing with the years used here. Moving along that same list turns up the Husqvarna FE 450, the TC 250 and the TE 125. It remains worth lining up a particular 350 EXC-F's build year against the list before placing an order.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eNo German ABE is on file for the DSM01, so Accossato lists it for off-road and competition use rather than road riding. Riders should check their own series' technical rules before fitting aftermarket spacers.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eOne pair of DSM01 rear wheel spacers, left and right, in the chosen colour.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: Off-road rear wheel spacers\u003c\/li\u003e\n\u003cli\u003ePart number: DSM01\u003c\/li\u003e\n\u003cli\u003eColours: Silver, orange\u003c\/li\u003e\n\u003cli\u003eUse: Off-road (enduro, motocross)\u003c\/li\u003e\n\u003cli\u003eFitment: KTM 350EXC-F (2003–2020)\u003c\/li\u003e\n\u003cli\u003eCheck: Compare with the application list before ordering\u003c\/li\u003e\n\u003cli\u003eRoad approval: None documented, off-road and competition use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Accossato","offers":[{"title":"Silver","offer_id":53900728860938,"sku":"DSM01T","price":37.68,"currency_code":"EUR","in_stock":true},{"title":"Orange","offer_id":53900728926474,"sku":"DSM01A","price":37.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/DSM01_silver_eb50909a-bfe2-4e34-817f-41930cb8eca2.png?v=1791822583"},{"product_id":"accossato-offroad-rear-wheel-spacers-ktm-450exc-f-2003-2020-dsm01","title":"Accossato Offroad Rear Wheel Spacers KTM 450EXC-F (2003-2020) – DSM01","description":"\u003cp\u003eThe 450 EXC-F is one of the biggest four-strokes in KTM's enduro range, built for riders who want strong torque on tap for heavy, technical terrain without having to keep the engine spinning fast to find it. Accossato lists its DSM01 rear wheel spacers for the 450 EXC-F across 2003 to 2020, the pair of sleeves fitted either side of the rear hub that take up the gap between the hub and the swingarm or axle block.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRear wheel spacers for the KTM 450 EXC-F, 2003 to 2020\u003c\/li\u003e\n\u003cli\u003eAccossato code DSM01, one spacer each side of the rear hub\u003c\/li\u003e\n\u003cli\u003eSold as a pair, left and right\u003c\/li\u003e\n\u003cli\u003eAvailable in orange or silver\u003c\/li\u003e\n\u003cli\u003eSame part also listed for the Husqvarna FC 250, the TE 300 and the TC 125\u003c\/li\u003e\n\u003cli\u003eNo German ABE on file; built for off-road and competition riding\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConstruction and Material Quality\u003c\/h2\u003e\n\u003cp\u003eFitted one to each side of the rear hub, the pair only does its job properly if both are seated correctly against the swingarm or axle block, so it is worth checking that neither one has been left sitting slightly askew after a quick wheel change. Orange or silver is simply a finish choice, and either sits against the hub the same way once fitted. A spacer that has sat loose in a toolbox for years, rather than on the bike, is worth a proper look over before it goes back in, since age alone can leave a part looking different from one that has stayed fitted and protected.\u003c\/p\u003e\n\u003ch2\u003eA Rebuild After a Long Lay-Up\u003c\/h2\u003e\n\u003cp\u003eA 450 EXC-F that has stood unused for a season or longer, whether through injury, a change of bikes, or simply other commitments, is usually stripped down properly before it goes back on the trail rather than fired up and ridden on the assumption that nothing has changed. Pulling the rear wheel as part of that rebuild is a natural point to check both spacers alongside the bearings and seals, since a part that was fine when the bike was parked up is not necessarily still fine after months of being handled, stored, or simply left to one side. Replacing anything that looks doubtful at this stage, rather than discovering it on the first ride back, keeps the rebuild from being undone by a small part nobody thought to check.\u003c\/p\u003e\n\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\n\u003cp\u003eAccossato runs the 450 EXC-F through 2003 to 2020 on its application list against the DSM01, the same span quoted here. Further down that list sit the Husqvarna FC 250, the TE 300 and the TC 125. Before placing an order, it is worth matching a particular 450 EXC-F's build year to the list rather than assuming every year of this long-running model is covered identically.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eNo German ABE is on file for the DSM01, so Accossato lists it for off-road and competition use rather than road riding. Riders should check their own series' technical rules before fitting aftermarket spacers.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eOne pair of DSM01 rear wheel spacers, left and right, in the chosen colour.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: Off-road rear wheel spacers\u003c\/li\u003e\n\u003cli\u003ePart number: DSM01\u003c\/li\u003e\n\u003cli\u003eColours: Silver, orange\u003c\/li\u003e\n\u003cli\u003eUse: Off-road (enduro, motocross)\u003c\/li\u003e\n\u003cli\u003eFitment: KTM 450EXC-F (2003–2020)\u003c\/li\u003e\n\u003cli\u003eCheck: Compare with the application list before ordering\u003c\/li\u003e\n\u003cli\u003eRoad approval: None documented, off-road and competition use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Accossato","offers":[{"title":"Silver","offer_id":53900728992010,"sku":"DSM01T","price":37.68,"currency_code":"EUR","in_stock":true},{"title":"Orange","offer_id":53900729024778,"sku":"DSM01A","price":37.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/DSM01_silver_0ac21f35-9e95-4ca0-a1c1-b2e1ad8e650e.png?v=1791822593"},{"product_id":"accossato-offroad-rear-wheel-spacers-ktm-500exc-f-2003-2020-dsm01","title":"Accossato Offroad Rear Wheel Spacers KTM 500EXC-F (2003-2020) – DSM01","description":"\u003cp\u003eThe 500 EXC-F tops KTM's four-stroke enduro range, built around the kind of low-down torque that suits riders tackling heavy, technical ground where momentum matters more than outright revs. Accossato lists its DSM01 rear wheel spacers for the 500 EXC-F across 2003 to 2020, the pair of sleeves fitted either side of the rear hub that take up the gap between the hub and the swingarm or axle block.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRear wheel spacers for the KTM 500 EXC-F, 2003 to 2020\u003c\/li\u003e\n\u003cli\u003eAccossato code DSM01, one spacer each side of the rear hub\u003c\/li\u003e\n\u003cli\u003eSold as a pair, left and right\u003c\/li\u003e\n\u003cli\u003eAvailable in orange or silver\u003c\/li\u003e\n\u003cli\u003eSame part also listed for the Husqvarna FE 350, the TC 125 and the TE 250\u003c\/li\u003e\n\u003cli\u003eNo German ABE on file; built for off-road and competition riding\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConstruction and Material Quality\u003c\/h2\u003e\n\u003cp\u003eFor the 500 EXC-F, the DSM01 is named by model and build years, with no material, weight or measurement given for the spacer. Orange and silver are cosmetic alternatives only, with no difference in how either locates the wheel once the axle is tightened. A spacer showing a crack or an uneven edge once removed should be set aside and checked properly rather than pressed back in because the wheel is already half assembled.\u003c\/p\u003e\n\u003ch2\u003eKeeping Left and Right in Order\u003c\/h2\u003e\n\u003cp\u003eWith two spacers that look almost identical once removed from the bike, it is easy to set them down without noting which came from which side, especially when the job is being done quickly between other tasks. If the two happen to differ in any way once off the bike, from wear to a slight mark picked up over time, putting one back on the wrong side is the kind of small mix-up that is simple to avoid and awkward to notice afterwards. Laying each spacer down on its own side of the workbench, or marking them lightly before pulling the wheel, is a habit worth keeping even when the two look interchangeable, since it removes any guesswork once the wheel goes back together.\u003c\/p\u003e\n\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\n\u003cp\u003eAccossato's listing puts the 500 EXC-F at 2003 to 2020 against the DSM01, matching what is used here. Also on that list, carrying the identical spacer, are the Husqvarna FE 350, the TC 125 and the TE 250. Lining up a particular 500 EXC-F's build year against the list before ordering remains the sensible check.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eNo German ABE is on file for the DSM01, so Accossato lists it for off-road and competition use rather than road riding. Riders should check their own series' technical rules before fitting aftermarket spacers.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eOne pair of DSM01 rear wheel spacers, left and right, in the chosen colour.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: Off-road rear wheel spacers\u003c\/li\u003e\n\u003cli\u003ePart number: DSM01\u003c\/li\u003e\n\u003cli\u003eColours: Silver, orange\u003c\/li\u003e\n\u003cli\u003eUse: Off-road (enduro, motocross)\u003c\/li\u003e\n\u003cli\u003eFitment: KTM 500EXC-F (2003–2020)\u003c\/li\u003e\n\u003cli\u003eCheck: Compare with the application list before ordering\u003c\/li\u003e\n\u003cli\u003eRoad approval: None documented, off-road and competition use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Accossato","offers":[{"title":"Silver","offer_id":53900729221386,"sku":"DSM01T","price":37.68,"currency_code":"EUR","in_stock":true},{"title":"Orange","offer_id":53900729254154,"sku":"DSM01A","price":37.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/DSM01_silver_c95d40e6-ee99-4c67-8436-bf7282eb05c0.png?v=1791822612"},{"product_id":"accossato-offroad-rear-wheel-spacers-kawasaki-klx-450r-2006-2018-dsk01","title":"Accossato Offroad Rear Wheel Spacers Kawasaki KLX 450R (2006-2018) – DSK01","description":"\u003cp\u003eKawasaki's KLX 450R blurs the line between a motocross machine and an enduro bike, sold both as the road-registered KLX450F and, for a run of years, as the dedicated off-road KLX450R. Accossato lists its DSK01 rear wheel spacers for the model across 2006 to 2018, the pair of sleeves fitted either side of the rear hub that take up the gap between the hub and the swingarm or axle block.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRear wheel spacers for the Kawasaki KLX 450R, 2006 to 2018\u003c\/li\u003e\n\u003cli\u003eAccossato code DSK01, one spacer each side of the rear hub\u003c\/li\u003e\n\u003cli\u003eSold as a pair, left and right\u003c\/li\u003e\n\u003cli\u003eAvailable in green, silver or gold\u003c\/li\u003e\n\u003cli\u003eSame part also listed for the Kawasaki KX250F\u003c\/li\u003e\n\u003cli\u003eNo German ABE on file; built for off-road and competition riding\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConstruction and Material Quality\u003c\/h2\u003e\n\u003cp\u003eEach spacer sits between the hub and the swingarm or axle block on its own side of the rear wheel, so after any wheel change it is worth a glance to confirm both have gone back exactly where they came from. Green, silver and gold are three finish options that make no difference to how the spacer sits against the hub; the choice comes down entirely to looks. A spacer that has picked up a dent or a split edge should be replaced rather than kept simply because the colour still matches the rest of the bike.\u003c\/p\u003e\n\u003ch2\u003eThree Finishes, One Fit\u003c\/h2\u003e\n\u003cp\u003eHaving a third colour option beyond the usual pairing gives a bit more room to match a spacer to how a particular bike is finished, whether that means sticking with Kawasaki's own green, going for a plainer silver, or picking gold for something that stands out. None of the three changes how the spacer performs once fitted, so the decision really comes down to which one looks right against a given bike's paint and other parts. Riders who have already chosen gold or silver hardware elsewhere on the bike often pick the matching spacer finish simply to keep the look consistent rather than for any other reason.\u003c\/p\u003e\n\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\n\u003cp\u003eCovering 2006 to 2018, Accossato's own list puts the KLX 450R against the DSK01, taking in both the road-registered KLX450F and the dedicated KLX450R variant in line with the years shown here. The identical spacer set appears again under the Kawasaki KX250F. Confirming a particular KLX 450R's build year and variant against the list before ordering is still worth the extra minute.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eNo German ABE is on file for the DSK01, so Accossato lists it for off-road and competition use rather than road riding. Riders should check their own series' technical rules before fitting aftermarket spacers.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eOne pair of DSK01 rear wheel spacers, left and right, in the chosen colour.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: Off-road rear wheel spacers\u003c\/li\u003e\n\u003cli\u003ePart number: DSK01\u003c\/li\u003e\n\u003cli\u003eColours: Silver, green, gold\u003c\/li\u003e\n\u003cli\u003eUse: Off-road (enduro, motocross)\u003c\/li\u003e\n\u003cli\u003eFitment: Kawasaki KLX 450R (2006–2018)\u003c\/li\u003e\n\u003cli\u003eCheck: Compare with the application list before ordering\u003c\/li\u003e\n\u003cli\u003eRoad approval: None documented, off-road and competition use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Accossato","offers":[{"title":"Silver","offer_id":53900729286922,"sku":"DSK01T","price":31.46,"currency_code":"EUR","in_stock":true},{"title":"Green","offer_id":53900729319690,"sku":"DSK01G","price":31.46,"currency_code":"EUR","in_stock":true},{"title":"Gold","offer_id":53900729352458,"sku":"DSK01Y","price":31.46,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/DSK01_green.png?v=1791822624"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/collections\/AchseSBKDucatiCorse_7a9a17e8-900a-4360-ae65-6c07221d9f5c.png?v=1785222875","url":"https:\/\/inter-pace.com\/en-cd\/collections\/axles.oembed?page=3","provider":"Inter-Pace","version":"1.0","type":"link"}