SC-Project S1 titanium half-system exhaust with carbon end cap for Ducati Panigale V4/S 2021 360° — drag me
1.7 k g
02 · Data & docs

The facts.

Technical data
BrandSC-Project
Part numberD26C-LT41T
System typeHalf-system (2-1 header + slip-on silencer)
MaterialTitanium (body and collector), carbon (end cap)
Outlet diameter70 mm
System weight1.7 kg (stock: 5.7 kg, saving: 4.0 kg)
Power gain+14.2 hp at 13,750 rpm
Torque gain+12.5 Nm at 6,500 rpm
Intended useRacing use only — not road legal
DescriptionThe whole story

Born from seasons of WSBK Championship development, the SC-Project S1 half-system for the Ducati Panigale V4/S (2021) is a masterclass in titanium craft and racing heritage. Part number D26C-LT41T pairs a full titanium collector and silencer body with a carbon end cap finish that is as visually arresting as it is thermally precise — the kind of exhaust that defines a race-prepared Panigale before a wheel has turned.

Key Features

  • Titanium 2-1 half-system construction: dramatically lighter than the stock unit at just 1.7 kg versus 5.7 kg stock, a saving of 4.0 kg
  • Measured gains of +14.2 hp at 13,750 rpm and +12.5 Nm torque at 6,500 rpm over the standard exhaust
  • 70 mm outlet diameter for unrestricted exhaust flow and the full, raw SC-Project racing note without a dB killer
  • Carbon end cap delivers a purposeful, race-pit aesthetic alongside outstanding heat resistance
  • T.I.G.-welded joints and CNC-machined titanium sleeves ensure precision fitment and long-term structural integrity
  • Titanium collector with welded segment bends optimises exhaust scavenging and throttle response throughout the rev range

Design, Finish and Heritage

SC-Project's racing pedigree runs deep, and the S1 half-system wears it openly. The raw titanium finish — developed through years of WSBK pit-lane refinement — has an understated, industrial beauty that no powder-coated steel exhaust can replicate. The carbon end cap adds a deliberate contrast: dark, woven texture against the warm silver of the titanium body, a combination that reads as thoroughly professional rather than merely decorative.

Every weld on the collector is placed by T.I.G. process for a clean, consistent bead that holds under sustained high-temperature cycling. CNC-machined titanium sleeves at the joints eliminate any tolerance stack-up, so the system sits flush and square against the Panigale's under-tail architecture from the first fitting. This is the kind of build quality you notice when you remove the factory exhaust and place the two side by side.

Performance and Engineering

The 2-1 configuration consolidates the V4's four exhaust pulses into a single optimised flow path before they reach the 70 mm outlet. The result is improved exhaust scavenging across the mid-range and a notably more aggressive throttle pickup from 6,500 rpm upward — exactly where the Panigale V4/S wants to be exploited on track. The weight saving of 4.0 kg sits low and central, contributing measurably to mass centralisation and changes-of-direction feel.

The 70 mm end outlet runs without a dB killer, producing the full unfiltered SC-Project racing sound that has become one of the most recognisable exhaust signatures in World Superbike. Deep, layered and entirely uncompromised.

Important Notice

This exhaust system is developed exclusively for racing use. It is not approved for road use and must not be fitted to any motorcycle operated on public roads. For racing use only.

Fitment and Compatibility

  • Ducati Panigale V4 (2021)
  • Ducati Panigale V4 S (2021)

Specifications

Attribute Detail
Brand SC-Project
Part number D26C-LT41T
System type Half-system (2-1 header + slip-on silencer)
Material Titanium (body and collector), carbon (end cap)
Outlet diameter 70 mm
System weight 1.7 kg (stock: 5.7 kg, saving: 4.0 kg)
Power gain +14.2 hp at 13,750 rpm
Torque gain +12.5 Nm at 6,500 rpm
Intended use Racing use only — not road legal
What's includedEverything in the box
  • SC-Project S1 slip-on silencer (titanium with carbon end cap)
  • Titanium collector with welded segment bends
  • Mounting springs and bolts
  • SC-Project sticker
  • 24-month official SC-Project warranty
FitmentWhich bikes this fits
  • Ducati Panigale V4/S (2021)
07 · Support

Questions, one topic at a time.

Estimate your shipping

Get the real shipping cost for this item to your address — the same rates as checkout.

Pick your countrySame rates as checkout

Choose a destination and hit Estimate — we fetch the live rates for this item.

How long does delivery take?

We’re based in Germany. Standard delivery goes by DHL and national postal services and takes about 2–5 days within Germany, 1–2 weeks within the EU and 2–6 weeks outside the EU. Need it sooner? Express delivery reaches most of the world within a few days — just choose it at checkout where available.

How much does shipping cost?

Your exact shipping cost is calculated by destination and weight and shown at checkout before you pay — no hidden fees. Express delivery is selectable at checkout where available.

Do you ship to my country?

Yes, we ship to over 130 countries. Prices, taxes and delivery times for your destination are calculated automatically at checkout.

Will I have to pay customs or import duties?

Within the EU, no — our prices already include all duties and EU VAT. For deliveries outside the EU (e.g. Switzerland, the UK or the USA), your order may be subject to import duties and taxes set by your country. These are collected by the carrier when your parcel arrives, aren’t included in our prices, and are outside our control.

How can I track my order?

As soon as your parcel ships we email you a tracking link, so you can follow it all the way to your door.

What if an item is out of stock?

On out-of-stock items you can request a delivery time or leave your email to be notified the moment it returns — just use the notification box on the product.

Didn’t find your answer?

Our team will personally help you choose the right gear or part — around 24h for a reply.