{"product_id":"ohlins-shock-spring-70-n-mm-260-mm-70-mm-06774-19","title":"Öhlins Shock Spring 70 N\/mm \/ 260 mm \/ Ø 70 mm – 06774-19","description":"\u003cp\u003eÖhlins part number 06774-19 is a shock absorber spring rated at 70 N\/mm, 260 mm long with a 70 mm inner diameter. The damper can only control the spring it is given; the wrong rate makes every click a compromise.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eStraight-wound, constant rate\u003c\/li\u003e\n\u003cli\u003eFree length 260 mm\u003c\/li\u003e\n\u003cli\u003eInner diameter 70 mm\u003c\/li\u003e\n\u003cli\u003eÖhlins part number 06774-19\u003c\/li\u003e\n\u003cli\u003eMeasured spring rate 70 N\/mm\u003c\/li\u003e\n\u003cli\u003ePowder-coated yellow\u003c\/li\u003e\n\u003cli\u003e140 mm of usable stroke\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHow Öhlins Makes Them\u003c\/h2\u003e\u003cp\u003eProduction is Öhlins' own in Sweden, and the tolerance on the rate is what separates these from a generic replacement. Every Öhlins dealer can re-valve the unit, because the shim stack is a documented, serviceable assembly. Seals are specified for temperature stability rather than for the lowest unit cost.\u003c\/p\u003e\u003ch2\u003eDimensions\u003c\/h2\u003e\u003cp\u003eThe 70 mm bore and 260 mm length are the two figures that decide whether it physically fits; 70 N\/mm decides whether it suits the rider.\u003c\/p\u003e\u003ch2\u003eWhere This Rate Belongs\u003c\/h2\u003e\u003cp\u003eA firm rate holds the chassis attitude when the front or rear is loaded hard. Firm rates trade some small-bump comfort for support — the right trade on a good surface at speed. A firm rate keeps the fork high in its stroke under braking, which preserves the geometry when the front is loaded hard. Road surfaces are the hardest test of a spring rate, because the fork has to cope with both a smooth stretch and a broken one.\u003c\/p\u003e\u003ch2\u003eHow a Rear Spring Works\u003c\/h2\u003e\u003cp\u003eThe damper can only control the spring it is given; the wrong rate makes every setting a compromise. A rear spring is the cheapest part of the suspension and the one that decides the most. On a linkage-equipped machine the wheel moves several millimetres for every millimetre the damper moves, and the spring rate has to account for that ratio.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eThis spring is chosen by its dimensions rather than by motorcycle model: check inner diameter, free length and rate against the fork it is going into. Selection is by measurement. If the diameter and free length match your fork, the remaining question is the rate. If you are replacing a sagged original, measure its free length first — a tired spring often measures several millimetres short.\u003c\/p\u003e\u003ch2\u003eFitting\u003c\/h2\u003e\u003cp\u003eOnce fitted, ride the machine before making damping changes: the new rate alters what the clicks do. Preload spacers usually need shortening or lengthening so the installed length stays correct. Fitting is a fork-oil job: the legs come apart, the springs go in, the oil level is set to specification.\u003c\/p\u003e\u003ch2\u003eRoad Approval\u003c\/h2\u003e\u003cp\u003eRoad approval: springs are not separately type-approved in Germany because they substitute a part that is already homologated with the fork. Model-specific documents, where they exist, are named above.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eÖhlins suspension rewards careful fitting. We recommend having the work done by an authorised Öhlins service centre — and we are one ourselves: we fit, service and set up Öhlins components in house. If you would like us to handle the installation, just ask and we will quote it with the order.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 06774-19\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSpring Rate:\u003c\/em\u003e 70 N\/mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFree Length:\u003c\/em\u003e 260 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eInner Diameter:\u003c\/em\u003e 70 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eStroke:\u003c\/em\u003e 140 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eConstruction:\u003c\/em\u003e Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Powder-coated yellow\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53645370032394,"sku":"06774-19","price":180.87,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/RearOhlinsSpring_118077f7-a7c5-4dc7-b3d8-6c8a8a3406c8.png?v=1788866824","url":"https:\/\/inter-pace.com\/en-ca\/products\/ohlins-shock-spring-70-n-mm-260-mm-70-mm-06774-19","provider":"Inter-Pace","version":"1.0","type":"link"}