{"product_id":"ohlins-shock-spring-60-n-mm-270-mm-70-mm-06774-15","title":"Öhlins Shock Spring 60 N\/mm \/ 270 mm \/ Ø 70 mm – 06774-15","description":"\u003cp\u003eÖhlins part number 06774-15 is a shock absorber spring rated at 60 N\/mm, 270 mm long with a 70 mm inner diameter. The damper can only control the spring it is given; the wrong rate makes every click a compromise.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eStraight-wound, constant rate\u003c\/li\u003e\n\u003cli\u003eInner diameter 70 mm\u003c\/li\u003e\n\u003cli\u003ePowder-coated yellow\u003c\/li\u003e\n\u003cli\u003eFree length 270 mm\u003c\/li\u003e\n\u003cli\u003eÖhlins part number 06774-15\u003c\/li\u003e\n\u003cli\u003eMeasured spring rate 60 N\/mm\u003c\/li\u003e\n\u003cli\u003e153 mm of usable stroke\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHow Öhlins Makes Them\u003c\/h2\u003e\u003cp\u003eAnodising is hard-coat rather than decorative, which matters on a component exposed to road salt and stone chips. Every unit is dyno-tested against the curve held for its part number, not sampled from a batch. Machining, anodising, assembly and testing all happen in the same building rather than across a supply chain.\u003c\/p\u003e\u003ch2\u003eDimensions\u003c\/h2\u003e\u003cp\u003eThe 70 mm bore and 270 mm length are the two figures that decide whether it physically fits; 60 N\/mm decides whether it suits the rider.\u003c\/p\u003e\u003ch2\u003eWhere This Rate Belongs\u003c\/h2\u003e\u003cp\u003eHeavier riders, two-up use and track days all push the choice towards this end. A firm rate holds the chassis attitude when the front or rear is loaded hard. A firm rate keeps the fork high in its stroke under braking, which preserves the geometry when the front is loaded hard. A road machine spends most of its life in the first third of the fork's travel — that is the part the rate governs.\u003c\/p\u003e\u003ch2\u003eWhat the Rear Spring Decides\u003c\/h2\u003e\u003cp\u003eTwo riders 20 kg apart on the same motorcycle genuinely need different rates, not different clicks. The damper can only control the spring it is given; the wrong rate makes every setting a compromise. Adding a pillion or luggage changes the rear load enough that the standard rate stops working properly.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eAny workshop with the fork or shock in front of it can answer whether this spring fits — the three figures above are all it needs. Sag figures, not feel, decide whether a rate is right. Öhlins publishes the targets for its own units. Rather than a model list, use the measurements: a fork that accepts this diameter and length is a candidate, and the rate follows from rider weight.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003ePreload spacers usually need shortening or lengthening so the installed length stays correct. The springs come powder-coated and need no preparation before they go in. Oil level is measured from the top of the tube with the fork compressed and the spring removed.\u003c\/p\u003e\u003ch2\u003eRoad Approval\u003c\/h2\u003e\u003cp\u003eRoad approval: not applicable to the spring on its own. Öhlins issues approvals against complete suspension units, not individual springs.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eÖhlins components deliver what they promise once they are fitted and set up properly. As an authorised Öhlins service centre we do exactly that in house — installation, service and setup. Simply ask if you would like us to take care of it.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 06774-15\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSpring Rate:\u003c\/em\u003e 60 N\/mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFree Length:\u003c\/em\u003e 270 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eInner Diameter:\u003c\/em\u003e 70 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eStroke:\u003c\/em\u003e 153 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eConstruction:\u003c\/em\u003e Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Powder-coated yellow\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53645369934090,"sku":"06774-15","price":180.6,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/RearOhlinsSpring_29d25b30-e622-4a7b-88f2-aafbf6bfcadf.png?v=1788866822","url":"https:\/\/inter-pace.com\/en-ca\/products\/ohlins-shock-spring-60-n-mm-270-mm-70-mm-06774-15","provider":"Inter-Pace","version":"1.0","type":"link"}