{"product_id":"ohlins-shock-spring-105-n-mm-200-mm-57-mm-61111-36","title":"Öhlins Shock Spring 105 N\/mm \/ 200 mm \/ Ø 57 mm – 61111-36","description":"\u003cp\u003eÖhlins part number 61111-36 is a shock absorber spring rated at 105 N\/mm, 200 mm long with a 57 mm inner diameter. Rear spring rate sets ride height, static sag and how much of the damper's stroke is actually usable.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFree length 200 mm\u003c\/li\u003e\n\u003cli\u003eInner diameter 57 mm\u003c\/li\u003e\n\u003cli\u003eMeasured spring rate 105 N\/mm\u003c\/li\u003e\n\u003cli\u003eÖhlins part number 61111-36\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHow Öhlins Makes Them\u003c\/h2\u003e\u003cp\u003eRates are offered in defined steps, so a change can be made in one direction at a time. Machining, anodising, assembly and testing all happen in the same building rather than across a supply chain. Every Öhlins dealer can re-valve the unit, because the shim stack is a documented, serviceable assembly.\u003c\/p\u003e\u003ch2\u003eSize and Rate\u003c\/h2\u003e\u003cp\u003eDimensionally this is a 57 mm × 200 mm spring; within that envelope Öhlins offers a range of rates, and this one is 105 N\/mm.\u003c\/p\u003e\u003ch2\u003eChoosing 105 N\/mm\u003c\/h2\u003e\u003cp\u003eFirm rates trade some small-bump comfort for support — the right trade on a good surface at speed. Support under braking improves; small-bump comfort gives a little back. A firm rate keeps the fork high in its stroke under braking, which preserves the geometry when the front is loaded hard. Road surfaces are the hardest test of a spring rate, because the fork has to cope with both a smooth stretch and a broken one.\u003c\/p\u003e\u003ch2\u003eRate and the Linkage\u003c\/h2\u003e\u003cp\u003eStatic sag at the rear sets the whole chassis attitude — get it wrong and the front geometry goes with it. The damper can only control the spring it is given; the wrong rate makes every setting a compromise. A spring that has settled in service sits shorter than new, which quietly lowers the bike and steepens the steering.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eIf you are replacing a sagged original, measure its free length first — a tired spring often measures several millimetres short. The safest way to choose is by static sag: set the target figure, and the rate follows from whether you can reach it with preload. Öhlins offers rates in defined steps so a change can be made in one direction at a time rather than by guesswork.\u003c\/p\u003e\u003ch2\u003eWhat Fitting Involves\u003c\/h2\u003e\u003cp\u003eCheck the free length against the old springs before fitting — a sagged original often measures short. Any suspension workshop can fit these; the fork does not need to leave the bike for long. Spring preload spacers may need adjusting to keep the installed length correct.\u003c\/p\u003e\u003ch2\u003eRoad Approval\u003c\/h2\u003e\u003cp\u003eRoad approval: springs are not separately type-approved in Germany because they substitute a part that is already homologated with the fork. Model-specific documents, where they exist, are named above.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eThis is not a part to rush. Öhlins recommends installation by an authorised service centre, and we are an authorised Öhlins service centre — fitting, servicing and setup all happen here. Get in touch if you would like the work done with the order.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 61111-36\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSpring Rate:\u003c\/em\u003e 105 N\/mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFree Length:\u003c\/em\u003e 200 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eInner Diameter:\u003c\/em\u003e 57 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53645454082314,"sku":"61111-36","price":184.24,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/RearOhlinsSpring_d3394674-a15b-43dc-8cca-4bf800823947.png?v=1788866996","url":"https:\/\/inter-pace.com\/en-ca\/products\/ohlins-shock-spring-105-n-mm-200-mm-57-mm-61111-36","provider":"Inter-Pace","version":"1.0","type":"link"}