I2M Chrome Pro 2 dashboard kit for Yamaha YZF-R3 2017–2026 360° — drag me
02 · Data & docs

The facts.

Technical data
ModelI2M Chrome Pro 2
FunctionsDashboard, GPS lap timer, data logger, TPMS, video input, lambda analysis
Display type5-inch graphic colour display, 800 x 480 resolution
GPS10 Hz GPS for trajectory and speed measurement
Alarm indicators11 freely configurable high-brightness RGB LEDs
Storage16 GB internal storage
Circuit storage20 pre-installed race circuits
Lap storageUp to 500 laps per circuit
CAN-Bus128 additional CAN-Bus acquisition channels at up to 500 Hz per channel
Sector splits4 sectors / split points per circuit
DescriptionThe whole story

The I2M Chrome Pro 2 is the most comprehensively equipped dashboard in the entire I2M Chrome series, and this fitment-specific kit for the Yamaha YZF-R3 (2017–2026) arrives ready to transform your R3 into a genuine data-driven performance tool. GPS lap timing, tyre pressure monitoring, lambda analysis, WiFi, and Bluetooth are all integrated into one unit — everything a serious track rider or junior racer needs to understand and improve every single lap.

Key Features

  • 5-inch full-colour graphic display at 800 x 480 resolution — crisp and readable even in direct sunlight during track and training use
  • 10 Hz GPS for precise trajectory mapping and speed measurement across 20 pre-installed race circuits
  • Integrated TPMS receiver with two TPMS sensors included — monitors tyre pressure and wheel temperature in real time
  • 128 additional CAN-Bus acquisition channels at up to 500 Hz per channel for deep, professional-grade telemetry
  • 11 freely configurable high-brightness RGB shift and alarm LEDs for instant visual feedback on shift points and critical thresholds
  • Integrated lambda controller with BOSCH LSU 4.9 sensor included — air/fuel analysis built in, no external module required
  • 16 GB internal storage logging up to 500 laps per circuit across 4 sector split points per track

Purpose-Built for the Yamaha YZF-R3

The Yamaha YZF-R3 rewards precision, consistency, and clean cornering technique above raw power. That characteristic makes data analysis especially valuable — small gains in braking points, corner entry, and throttle application compound over a full session. The I2M Chrome Pro 2 captures all of it. The dedicated R3 adapter and main wiring harness included in this kit mean the unit integrates directly with the R3's CAN-Bus architecture, pulling factory channel data without any compromise.

Whether you are competing in junior racing classes, running structured trackdays, or simply determined to extract every tenth from your R3, the Chrome Pro 2 gives you the same depth of information a professional race engineer would demand — displayed clearly on a 5-inch colour screen and reinforced by configurable RGB LEDs that keep your eyes on the road, not buried in a menu.

Chrome Pro 2 vs. Chrome Lite and Chrome Plus2

Riders considering the broader Chrome range should understand where the Pro 2 sits. Compared to the Chrome Lite, the Pro 2 delivers substantially more CAN-Bus acquisition channels, higher sampling rates for finer-grained analysis, WiFi connectivity for wireless data transfer, Bluetooth BLE for additional device pairing, full TPMS functionality, an integrated lambda controller, greater storage capacity, and far more flexibility for rider and mechanic display pages.

Against the Chrome Plus2 — itself already a high-end unit — the Pro 2 adds the integrated TPMS receiver, real-time tyre pressure and wheel temperature monitoring, and ships with two TPMS sensors and the BOSCH LSU 4.9 lambda probe already in the box. For riders who want a single, complete system rather than building up hardware incrementally, the Pro 2 is the definitive choice.

Display and Alert System

The 5-inch colour display running at 800 x 480 pixels presents speed, lap time, sector splits, GPS data, tyre pressures, temperatures, and session values in a format sized for a moving motorcycle cockpit. The 11 freely configurable high-brightness RGB LEDs work in parallel — they can be assigned to shift points, warning thresholds, or any parameter the rider defines, so critical information is communicated peripherally without any need to glance down at the screen.

Who Should Choose the Chrome Pro 2?

This dashboard is the right fit if you want to extract the maximum from your Yamaha YZF-R3, need a fully integrated system covering GPS lap timing, data logging, TPMS, and lambda analysis in one unit, want to replace the standard R3 cockpit with a professional-level racing display, intend to analyse and compare sessions systematically, or are looking for an uncompromising track upgrade that grows with your development as a rider.

Fitment & Compatibility

This kit is supplied with the dedicated R3 adapter and fits the following model:

  • Yamaha YZF-R3 — model years 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026

Specifications

Model I2M Chrome Pro 2
Functions Dashboard, GPS lap timer, data logger, TPMS, video input, lambda analysis
Display type 5-inch graphic colour display, 800 x 480 resolution
GPS 10 Hz GPS for trajectory and speed measurement
Alarm indicators 11 freely configurable high-brightness RGB LEDs
Storage 16 GB internal storage
Circuit storage 20 pre-installed race circuits
Lap storage Up to 500 laps per circuit
CAN-Bus 128 additional CAN-Bus acquisition channels at up to 500 Hz per channel
Sector splits 4 sectors / split points per circuit
What's includedEverything in the box
  • 1x Chrome Pro 2 Dashboard + antenna with 90° SMA connector for TPMS receiver + R3 adapter + GPS receiver + main wiring harness + 2 TPMS sensors with adapters + BOSCH LSU 4.9 lambda sensor + cleaning cloth
FitmentWhich bikes this fits
  • Yamaha YZF-R3 (2017–2026)
07 · Support

Questions, one topic at a time.

Estimate your shipping

Get the real shipping cost for this item to your address — the same rates as checkout.

Pick your countrySame rates as checkout

Choose a destination and hit Estimate — we fetch the live rates for this item.

How long does delivery take?

We’re based in Germany. Standard delivery goes by DHL and national postal services and takes about 2–5 days within Germany, 1–2 weeks within the EU and 2–6 weeks outside the EU. Need it sooner? Express delivery reaches most of the world within a few days — just choose it at checkout where available.

How much does shipping cost?

Your exact shipping cost is calculated by destination and weight and shown at checkout before you pay — no hidden fees. Express delivery is selectable at checkout where available.

Do you ship to my country?

Yes, we ship to over 130 countries. Prices, taxes and delivery times for your destination are calculated automatically at checkout.

Will I have to pay customs or import duties?

Within the EU, no — our prices already include all duties and EU VAT. For deliveries outside the EU (e.g. Switzerland, the UK or the USA), your order may be subject to import duties and taxes set by your country. These are collected by the carrier when your parcel arrives, aren’t included in our prices, and are outside our control.

How can I track my order?

As soon as your parcel ships we email you a tracking link, so you can follow it all the way to your door.

What if an item is out of stock?

On out-of-stock items you can request a delivery time or leave your email to be notified the moment it returns — just use the notification box on the product.

Didn’t find your answer?

Our team will personally help you choose the right gear or part — around 24h for a reply.