Accossato replacement clutch lever AGS17 for Husqvarna FE 250 (2018-2023)
02 · Data & docs

The facts.

Technical data
BrandAccossato
TypeReplacement clutch lever, original type
Part numberAGS17
PositionClutch, left handlebar
Lever colourSilver
Pieces1
FitmentHusqvarna FE 250 (2018–2023)
Road approvalNone documented, track use only
CheckCompare with your original lever before ordering
DescriptionThe whole story▼

There is a kind of riding where the clutch never really rests. Steep steps, slippery roots, rock gardens taken at barely more than walking pace: on ground like that the drive to the rear wheel is controlled almost entirely by the left hand, and an FE 250 is light enough that plenty of riders take it there. The lever is under load for hours, and it is also the part that hits a rock when the bike tips over. Accossato lists the AGS17 for the FE 250 from 2018 to 2023, a silver clutch lever in the original shape.

Key Features

  • Original-shape clutch lever for the Husqvarna FE 250
  • Accossato's entry covers 2018 to 2023
  • Silver
  • Left of the handlebar, hydraulic clutch
  • One of Accossato's original spare parts types
  • Accossato says the manufacturing process raises resistance after a collision
  • A single lever in the pack
  • No approval documentation held; competition use

Construction and Material Quality

The AGS17 is listed by Accossato as an original spare parts type, which describes both what it is and what it is not. It is a lever in the form Husqvarna used on the FE 250, sold to repair the bike rather than to change it, and it is not a tuning part. Accossato states that the way these levers are produced leaves them more resistant after damage or a collision, and gives the colour for this bike as silver. The company names no material and no measurements, and none are supplied from our side.

Where the Clutch Does the Work

Riders who take an enduro bike onto genuinely hard ground develop a feel for the clutch that road riders never need. The technique is to keep the engine spinning and to let the lever decide how much of that reaches the tyre, releasing and pulling in small, quick movements while the front wheel is placed deliberately. It is tiring, and it depends completely on a lever that does the same thing every time. A lever with a worn or dry pivot introduces a vagueness you cannot compensate for, and one bent even slightly in an earlier tip-over will meet your fingers in the wrong place after an hour when your hands are tired. Check it before the ride rather than during it. The pivot and its bore should be clean and lightly greased, the lever should return fully under its own spring, and there should be the small amount of free play the handbook specifies at rest so that the master cylinder piston comes back. If the lever is bent, fit a new one and leave the old one out of the toolbox.

Fitment and Compatibility

Accossato lists the AGS17 for the FE 250 from 2018 to 2023, with the AGS14 covering 2014 to 2016 on the same model and nothing given for 2017. The same lever appears with us under the FC 250, the FE 501 and the TC 250, among a long row of related machines. On the brake side the FE 250 has the AGD316, the AGD14 and, for 2024, the AGD319, so the year decides there as well. Accossato's tuning parts for this bike are the CNC clutch levers C7283 and C7284.

Road Approval

We cannot show a German ABE or a test mark for the AGS17, because none was issued to us. The lever is listed for racing and competition.

Scope of Delivery

Delivered: one silver AGS17 clutch lever.

Specifications

  • Type: Replacement clutch lever, original type
  • Part number: AGS17
  • Position: Clutch, left handlebar
  • Lever colour: Silver
  • Pieces: 1
  • Fitment: Husqvarna FE 250 (2018–2023)
  • Road approval: None documented, track use only
  • Check: Compare with your original lever before ordering
What's includedEverything in the box▼
  • 1x Accossato replacement clutch lever
FitmentWhich bikes this fits▼
  • Husqvarna FE 250 (2018–2023)
  • Husqvarna FC 250 (2018–2021)
  • Husqvarna FC 350 (2018–2021)
  • Husqvarna FC 450 (2018–2021)
  • Husqvarna FE 350 (2018–2023)
  • Husqvarna FE 450 (2018–2023)
  • Husqvarna FE 501 (2018–2023)
  • Husqvarna FS 450 (2018–2019)
  • Husqvarna FX 450 (2021–2022)
  • Husqvarna TC 125 (2018)
  • Husqvarna TC 250 (2018–2021)
  • Husqvarna TE 300 (2018–2023)
  • Husqvarna TX 125 (2018–2019)
  • KTM 125EXC (2009–2016)
  • KTM 125SX (2009–2018)
  • KTM 150SX (2009–2018)
  • KTM 200EXC (2009–2016)
07 · Support

Questions, one topic at a time.

Estimate your shipping

Get the real shipping cost for this item to your address — the same rates as checkout.

Pick your countrySame rates as checkout

Choose a destination and hit Estimate — we fetch the live rates for this item.

How long does delivery take?

We’re based in Germany. Standard delivery goes by DHL and national postal services and takes about 2–5 days within Germany, 1–2 weeks within the EU and 2–6 weeks outside the EU. Need it sooner? Express delivery reaches most of the world within a few days — just choose it at checkout where available.

How much does shipping cost?

Your exact shipping cost is calculated by destination and weight and shown at checkout before you pay — no hidden fees. Express delivery is selectable at checkout where available.

Do you ship to my country?

Yes, we ship to over 130 countries. Prices, taxes and delivery times for your destination are calculated automatically at checkout.

Will I have to pay customs or import duties?

Within the EU, no — our prices already include all duties and EU VAT. For deliveries outside the EU (e.g. Switzerland, the UK or the USA), your order may be subject to import duties and taxes set by your country. These are collected by the carrier when your parcel arrives, aren’t included in our prices, and are outside our control.

How can I track my order?

As soon as your parcel ships we email you a tracking link, so you can follow it all the way to your door.

What if an item is out of stock?

On out-of-stock items you can request a delivery time or leave your email to be notified the moment it returns — just use the notification box on the product.

Didn’t find your answer?

Our team will personally help you choose the right gear or part — around 24h for a reply.