Accossato clutch lever ESD037 with black blade and black hub for Moto Guzzi V7 III Racer 750 (2017-2020)⟲ 360° — drag me
02 · Data & docs

The facts.

Technical data
BrandAccossato
TypeFixed CNC clutch lever for the original mounting
Part numberESD037
FunctionClutch lever, left hand
MaterialCNC-machined aluminium, anodised, black hub
Blade coloursBlack, blue, red, orange, gold, silver, green
LengthsShort, standard (approx. 138 mm), long
Reach adjustmentAdjustable distance to the grip
FitmentMoto Guzzi V7 III Racer 750 (2017–2020)
Road approvalNone documented, track use only
DescriptionThe whole story▼

Blip the throttle of a V7 III Racer at a standstill and the whole motorcycle rocks sideways. The reason is the Moto Guzzi layout: the crankshaft of the transverse V-twin runs along the length of the bike, so every change in revs twists the machine a little around its own axis. It is part of the character, and a reminder that this drivetrain answers directly to what your hands do. The Accossato ESD037 is a clutch lever for the V7 III Racer of 2017 to 2020, CNC-machined from aluminium, anodised and adjustable in its distance to the grip.

Key Features

  • Clutch lever for the V7 III Racer, model years 2017 to 2020
  • Takes the place of the stock lever at the original clutch mounting
  • Reach adjuster close to the pivot
  • Blades: short, standard at approximately 138 mm, and long
  • Silver in standard and short; black and red in standard only
  • Machined aluminium, anodised, black hub
  • Rigid lever without a folding joint

Construction and Material Quality

Anodising is an electrochemical treatment, not a coat of paint. Once the ESD037 has been machined, its surface is converted into a hard oxide layer, the dye settles into the pores of that layer, and the pores are then sealed. The colour therefore belongs to the aluminium and copes with the daily rub of a glove far better than lacquer would. Accossato finishes the lever in two tones: a black hub, which holds the pivot and the adjuster, and a blade in the colour of your choice. The blade itself is fixed, without any hinge between hub and tip.

Rolling Away Without the Lurch

The sideways twitch at a standstill is harmless, but the same directness shows when you pull away. The V7 III Racer sends its drive through a shaft rather than a chain, and a shaft has no slack to soak up a clumsy release: let the clutch out too quickly and the jolt goes straight through the driveline to the rear tyre, whereas a steady release lets the bike roll off cleanly. Café racers invite brisk getaways, yet the tidy ones come from control, not from a fast left hand. That control is easier when the lever sits where the fingers can hold the friction point without stretching. Use the adjuster to bring the ESD037 in until your fingers wrap the blade at their middle joints while the palm stays on the grip. The standard blade is closest to the lever Moto Guzzi fitted; the long blade spreads the pull across the whole hand and lightens it; the short blade suits riders who keep two fingers on the clutch.

Fitment and Compatibility

The ESD037 is listed for the V7 III Racer from 2017 to 2020, with the model entered as V7 750 Racer. It is fitted where the stock lever sits today, at the bike's own clutch mounting. For the right hand, the EDF016 brake lever is listed for the same years. Both can be ordered in matching colours, although black and red are made only in the standard length.

Road Approval

We sell the ESD037 for track use, as no German ABE is documented for it.

Scope of Delivery

Supplied as one clutch lever in its Accossato box, anodised in the colour you select.

Specifications

  • Part number: ESD037
  • Type: fixed clutch lever for the original mounting
  • Material: CNC-machined aluminium, anodised
  • Hub: black
  • Blade colours: black, blue, red, orange, gold, silver, green
  • Lengths: standard (approx. 138 mm) in every colour; short in blue, orange, gold, silver, green; long in blue, orange, gold, green
  • Reach: adjustable distance to the grip
  • Road approval: none documented, track use only
  • Fitment: Moto Guzzi V7 III Racer 750, 2017 to 2020
What's includedEverything in the box▼
  • 1x Accossato CNC clutch lever in its own box
FitmentWhich bikes this fits▼
  • Moto Guzzi V7 III Racer 750 (2017–2020)
  • Benelli BN251 (2016–2017)
  • Benelli BN302 (2015–2017)
  • Benelli BN600 GT (2015–2016)
  • Benelli BN600 R (2014–2016)
  • Benelli LEONCINO 500 (2017)
  • Benelli LEONCINO 500 TRAIL (2018)
  • Benelli TRK 502 (2017–2018)
  • Moto Guzzi V7 II Racer ABS 750 (2015–2016)
  • Moto Guzzi V7 II SPECIAL (2015–2016)
  • Moto Guzzi V7 II STONE (2015–2016)
  • Moto Guzzi V7 III Milano 750 (2018–2020)
  • Moto Guzzi V7 III SPECIAL (2017–2020)
  • Moto Guzzi V7 III STONE 750 (2017–2020)
07 · Support

Questions, one topic at a time.

Estimate your shipping

Get the real shipping cost for this item to your address — the same rates as checkout.

Pick your countrySame rates as checkout

Choose a destination and hit Estimate — we fetch the live rates for this item.

How long does delivery take?

We’re based in Germany. Standard delivery goes by DHL and national postal services and takes about 2–5 days within Germany, 1–2 weeks within the EU and 2–6 weeks outside the EU. Need it sooner? Express delivery reaches most of the world within a few days — just choose it at checkout where available.

How much does shipping cost?

Your exact shipping cost is calculated by destination and weight and shown at checkout before you pay — no hidden fees. Express delivery is selectable at checkout where available.

Do you ship to my country?

Yes, we ship to over 130 countries. Prices, taxes and delivery times for your destination are calculated automatically at checkout.

Will I have to pay customs or import duties?

Within the EU, no — our prices already include all duties and EU VAT. For deliveries outside the EU (e.g. Switzerland, the UK or the USA), your order may be subject to import duties and taxes set by your country. These are collected by the carrier when your parcel arrives, aren’t included in our prices, and are outside our control.

How can I track my order?

As soon as your parcel ships we email you a tracking link, so you can follow it all the way to your door.

What if an item is out of stock?

On out-of-stock items you can request a delivery time or leave your email to be notified the moment it returns — just use the notification box on the product.

Didn’t find your answer?

Our team will personally help you choose the right gear or part — around 24h for a reply.