{"product_id":"ohlins-shock-spring-95-n-mm-190-mm-46-mm-60293-31","title":"Öhlins Shock Spring 95 N\/mm \/ 190 mm \/ Ø 46 mm – 60293-31","description":"\u003cp\u003eÖhlins part number 60293-31 is a shock absorber spring rated at 95 N\/mm, 190 mm long with a 46 mm inner diameter. Adding a pillion or luggage changes the load enough that the standard rate stops working.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eStraight-wound, constant rate\u003c\/li\u003e\n\u003cli\u003e88 mm of usable stroke\u003c\/li\u003e\n\u003cli\u003eFree length 190 mm\u003c\/li\u003e\n\u003cli\u003ePowder-coated yellow\u003c\/li\u003e\n\u003cli\u003eMeasured spring rate 95 N\/mm\u003c\/li\u003e\n\u003cli\u003eInner diameter 46 mm\u003c\/li\u003e\n\u003cli\u003eÖhlins part number 60293-31\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHow Öhlins Makes Them\u003c\/h2\u003e\u003cp\u003eThe wire is progressively wound where the application calls for it and straight where it does not. Öhlins sets a baseline for each part number on the machine it was developed on, so it works before anything is adjusted. Every unit is dyno-tested against the curve held for its part number, not sampled from a batch.\u003c\/p\u003e\u003ch2\u003eDimensions\u003c\/h2\u003e\u003cp\u003eFree length 190 mm, inner diameter 46 mm, rate 95 N\/mm — those three figures define the part completely.\u003c\/p\u003e\u003ch2\u003eWhere This Rate Belongs\u003c\/h2\u003e\u003cp\u003eA firm rate holds the chassis attitude when the front or rear is loaded hard. Firm rates also suit machines carrying luggage as a matter of course. This end of the range suits heavier riders, two-up use, or a machine ridden hard enough that fork dive becomes the limit. A road machine spends most of its life in the first third of the fork's travel — that is the part the rate governs.\u003c\/p\u003e\u003ch2\u003eRate and the Linkage\u003c\/h2\u003e\u003cp\u003eThe damper can only control the spring it is given; the wrong rate makes every setting a compromise. Static sag at the rear sets the whole chassis attitude — get it wrong and the front geometry goes with it. Because the linkage is progressive on most modern machines, a small change in rate moves the sag more than riders expect.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eÖhlins lists no fixed model here — the spring is defined by its measurements, and any fork with matching dimensions can take it. Where Öhlins lists this size against a particular unit, the listing is a starting point rather than a boundary. If you are replacing a sagged original, measure its free length first — a tired spring often measures several millimetres short.\u003c\/p\u003e\u003ch2\u003eWhat Fitting Involves\u003c\/h2\u003e\u003cp\u003eAny suspension workshop can fit these; the fork does not need to leave the bike for long. Torque the fork caps to the manufacturer's figure; the springs change nothing about the assembly torque. Fork oil should be replaced at the same time — it is already out of the leg.\u003c\/p\u003e\u003ch2\u003eRoad Approval\u003c\/h2\u003e\u003cp\u003eRoad approval: springs are not separately type-approved in Germany because they substitute a part that is already homologated with the fork. Model-specific documents, where they exist, are named above.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eWe are an authorised Öhlins service centre, so the installation does not have to be your problem: we fit and set up Öhlins components in our own workshop. Ask us when you order and we will include the work.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 60293-31\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSpring Rate:\u003c\/em\u003e 95 N\/mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFree Length:\u003c\/em\u003e 190 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eInner Diameter:\u003c\/em\u003e 46 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eStroke:\u003c\/em\u003e 88 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eConstruction:\u003c\/em\u003e Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Powder-coated yellow\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53645421478154,"sku":"60293-31","price":1554.0,"currency_code":"BWP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/RearOhlinsSpring_4e19e240-c612-4e75-a637-40c3ecb2b328.png?v=1788866949","url":"https:\/\/inter-pace.com\/en-bw\/products\/ohlins-shock-spring-95-n-mm-190-mm-46-mm-60293-31","provider":"Inter-Pace","version":"1.0","type":"link"}