Accossato brake lever EDF088 with black blade and black hub for Kawasaki GTR 1400 (2007-2019)⟲ 360° — drag me
02 · Data & docs

The facts.

Technical data
BrandAccossato
TypeFixed CNC brake lever for the original mounting
Part numberEDF088
FunctionFront brake lever, right hand
MaterialCNC-machined aluminium, anodised, black hub
Blade coloursBlack, blue, red, orange, gold, silver, green
LengthsShort, standard (approx. 138 mm), long
Reach adjustmentAdjustable distance to the grip
FitmentKawasaki GTR 1400 (2007–2019)
Road approvalNone documented, track use only
DescriptionThe whole story▼

The GTR 1400 is built for distance. Kawasaki's big sports tourer, sold in North America as the Concours 14, combines a four-cylinder engine derived from the ZZR1400 with shaft drive, a large fairing and panniers, and it feels most at home when the day's route runs to several hundred kilometres. By the evening of such a day, the hands have done a great deal of quiet work. The Accossato EDF088 replaces the front brake lever of the GTR 1400, listed from 2007 to 2019, with a CNC-machined aluminium lever whose reach you can set to your own hand.

Key Features

  • Front brake lever for the Kawasaki GTR 1400, 2007 to 2019
  • Adjustable reach, set near the pivot
  • Long blade for extra leverage in blue, gold, green and orange
  • Standard blade approximately 138 mm in all seven colours
  • Uses the original Kawasaki master cylinder
  • CNC-machined aluminium, anodised, black hub
  • One-piece blade without a folding joint
  • Comes in an Accossato box

Construction and Material Quality

The EDF088 is machined, not moulded. Accossato cuts it from aluminium on CNC machines, which gives the blade a consistent profile and an even surface where the fingers rest, and then anodises it. The result is a hard oxide layer at the surface of the aluminium, black on the hub and in your chosen shade on the blade. For a GTR 1400 that is washed after rainy days and parked outside hotels overnight, a finish that is part of the metal ages more gracefully than a coat of paint. The EDF088 is rigid: one continuous piece, no hinge.

The Last Hour of a Long Day

Fatigue on a tourer rarely announces itself. After six or seven hours in the saddle, the right hand has made countless small throttle corrections and many brake applications, and the forearm muscles are tired in a way you only notice when a sharp stop is suddenly needed. That is when the position of the brake lever matters most. A blade that sits too far away forces the fingers to open wide before they can squeeze, adding a delay and asking for effort from a hand that has little left. Set closer with the adjuster, the EDF088 lets the fingers rest on the blade in a relaxed curve, ready to act. The long blade adds leverage, so a firm stop takes less force than with a shorter lever, which is worth having on a heavy tourer carrying luggage and perhaps a passenger. Set the reach at the start of a trip, wearing the gloves you will ride in, and the lever will be where your fingers expect it for the whole journey on the GTR 1400.

Fitment and Compatibility

The GTR 1400 is on Accossato's list for the EDF088 across the whole span from 2007 to 2019. It replaces the stock blade on the original master cylinder. On the left side, the ESH088 clutch lever is listed for the same years with the same colours and lengths, if you would like both levers to match.

Road Approval

Our documents show no German ABE for the EDF088, so this lever is offered for use on the track.

Scope of Delivery

You will receive one EDF088 brake lever for the GTR 1400 in an Accossato box, anodised in the colour you ordered and made in the blade length you chose.

Specifications

  • Part number: EDF088
  • Type: fixed brake lever for the original mounting
  • Material: CNC-machined aluminium, anodised
  • Hub: black
  • Blade colours: black, blue, red, orange, gold, silver, green
  • Lengths: standard (approx. 138 mm) in every colour; short in blue, orange, gold, silver, green; long in blue, orange, gold, green
  • Reach: adjustable distance to the grip
  • Road approval: none documented, track use only
  • Fitment: Kawasaki GTR 1400, 2007 to 2019
What's includedEverything in the box▼
  • 1x Accossato CNC brake lever in its own box
FitmentWhich bikes this fits▼
  • Kawasaki GTR 1400 (2007–2019)
  • Kawasaki Z1000 (2007–2020, 2022–2024)
  • Kawasaki Z1000R (2017–2023)
  • Kawasaki Z1000SX (2011–2019)
  • Kawasaki Z900RS (2018–2024)
  • Kawasaki ZX-10 R (2006–2015)
  • Kawasaki ZX-6R (1998–2026)
  • Kawasaki ZZR1400 (2006–2020)
07 · Support

Questions, one topic at a time.

Estimate your shipping

Get the real shipping cost for this item to your address — the same rates as checkout.

Pick your countrySame rates as checkout

Choose a destination and hit Estimate — we fetch the live rates for this item.

How long does delivery take?

We’re based in Germany. Standard delivery goes by DHL and national postal services and takes about 2–5 days within Germany, 1–2 weeks within the EU and 2–6 weeks outside the EU. Need it sooner? Express delivery reaches most of the world within a few days — just choose it at checkout where available.

How much does shipping cost?

Your exact shipping cost is calculated by destination and weight and shown at checkout before you pay — no hidden fees. Express delivery is selectable at checkout where available.

Do you ship to my country?

Yes, we ship to over 130 countries. Prices, taxes and delivery times for your destination are calculated automatically at checkout.

Will I have to pay customs or import duties?

Within the EU, no — our prices already include all duties and EU VAT. For deliveries outside the EU (e.g. Switzerland, the UK or the USA), your order may be subject to import duties and taxes set by your country. These are collected by the carrier when your parcel arrives, aren’t included in our prices, and are outside our control.

How can I track my order?

As soon as your parcel ships we email you a tracking link, so you can follow it all the way to your door.

What if an item is out of stock?

On out-of-stock items you can request a delivery time or leave your email to be notified the moment it returns — just use the notification box on the product.

Didn’t find your answer?

Our team will personally help you choose the right gear or part — around 24h for a reply.