{"product_id":"ohlins-shock-spring-50-n-mm-180-mm-46-mm-60282-01","title":"Öhlins Shock Spring 50 N\/mm \/ 180 mm \/ Ø 46 mm – 60282-01","description":"\u003cp\u003eÖhlins part number 60282-01 is a shock absorber spring rated at 50 N\/mm, 180 mm long with a 46 mm inner diameter. A rear spring matched to rider and load keeps the chassis attitude where the factory intended it.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePowder-coated black\u003c\/li\u003e\n\u003cli\u003eMeasured spring rate 50 N\/mm\u003c\/li\u003e\n\u003cli\u003eInner diameter 46 mm\u003c\/li\u003e\n\u003cli\u003eÖhlins part number 60282-01\u003c\/li\u003e\n\u003cli\u003eStraight-wound, constant rate\u003c\/li\u003e\n\u003cli\u003e81 mm of usable stroke\u003c\/li\u003e\n\u003cli\u003eFree length 180 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eManufacture and Tolerance\u003c\/h2\u003e\u003cp\u003eÖhlins publishes recommended sag figures for its springs, so the setup has a reference rather than a feel. Every Öhlins dealer can re-valve the unit, because the shim stack is a documented, serviceable assembly. Machining, anodising, assembly and testing all happen in the same building rather than across a supply chain.\u003c\/p\u003e\u003ch2\u003eSize and Rate\u003c\/h2\u003e\u003cp\u003eDimensionally this is a 46 mm × 180 mm spring; within that envelope Öhlins offers a range of rates, and this one is 50 N\/mm.\u003c\/p\u003e\u003ch2\u003eChoosing 50 N\/mm\u003c\/h2\u003e\u003cp\u003eThis is where most riders of average weight land once static sag has been set to specification. If you are unsure and close to average weight in full kit, this is the sensible starting point. This is the middle of Öhlins' range — the rate most riders of average weight end up on once sag is set properly. Road surfaces are the hardest test of a spring rate, because the fork has to cope with both a smooth stretch and a broken one.\u003c\/p\u003e\u003ch2\u003eRate and the Linkage\u003c\/h2\u003e\u003cp\u003eAdding a pillion or luggage changes the rear load enough that the standard rate stops working properly. A spring that has settled in service sits shorter than new, which quietly lowers the bike and steepens the steering. The rear spring carries the rider, the pillion and the luggage; the front carries only part of it.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eWhere Öhlins lists this size against a particular unit, the listing is a starting point rather than a boundary. Rate is the variable that depends on the rider, not on the machine. Two people on the same bike may well want two different numbers. The safest way to choose is by static sag: set the target figure, and the rate follows from whether you can reach it with preload.\u003c\/p\u003e\u003ch2\u003eWhat Fitting Involves\u003c\/h2\u003e\u003cp\u003eFork oil should be replaced at the same time — it is already out of the leg. Once fitted, ride the machine before making damping changes: the new rate alters what the clicks do. A spring that is the correct length still needs the preload spacer checked, since installed length is what sets sag.\u003c\/p\u003e\u003ch2\u003eRoad Approval\u003c\/h2\u003e\u003cp\u003eRoad approval: not applicable to the spring on its own. Öhlins issues approvals against complete suspension units, not individual springs.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eFitting matters as much as the part. We are an authorised Öhlins service centre and carry out installation, servicing and setup ourselves — get in touch and we will arrange it alongside your order.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 60282-01\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSpring Rate:\u003c\/em\u003e 50 N\/mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFree Length:\u003c\/em\u003e 180 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eInner Diameter:\u003c\/em\u003e 46 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eStroke:\u003c\/em\u003e 81 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eConstruction:\u003c\/em\u003e Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Powder-coated black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53645420593418,"sku":"60282-01","price":46.0,"currency_code":"BSD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/RearOhlinsSpring_3261e2fc-cf85-495a-a863-ccf770500b55.png?v=1788866945","url":"https:\/\/inter-pace.com\/en-bs\/products\/ohlins-shock-spring-50-n-mm-180-mm-46-mm-60282-01","provider":"Inter-Pace","version":"1.0","type":"link"}