{"title":"Eliminators","description":"\u003cp\u003eResistor and sensor eliminators from JetPrime and I2M — the clean way to remove street hardware from a race build without lighting up the dash with error codes.\u003c\/p\u003e\u003cp\u003eWhen mirrors, lights and emissions hardware come off for the track, eliminators keep the ECU satisfied: exhaust valve eliminators, lambda plugs, side-stand and dash eliminators, all model-specific. The unglamorous parts that make a race conversion actually work.\u003c\/p\u003e","products":[{"product_id":"jetprime-eliminator-set-front-rear-light-jp-es-kit-02","title":"JetPrime Eliminator Set Front \u0026 Rear Light JP ES KIT 02 – Aprilia RS 660 (2020-2026)","description":"\u003cp\u003eWhen you remove the front and rear indicators from your Aprilia RS 660 for track use, the dashboard throws persistent fault warnings that break your focus mid-session. The JetPrime Eliminator Set JP ES KIT 02 resolves this cleanly: plug it in, clear the errors, and ride without distraction — no cutting, no splicing, no coding required.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEliminates dashboard fault warnings triggered by removed front and rear lights on the Aprilia RS 660\u003c\/li\u003e\n\u003cli\u003ePlug-and-play fitment using OEM-matching connectors — installs in minutes without cutting a single wire\u003c\/li\u003e\n\u003cli\u003eDeveloped and tested specifically for the RS 660 model years 2020 to 2026, ensuring reliable compatibility\u003c\/li\u003e\n\u003cli\u003ePremium-grade components selected for long-term durability under race-day conditions\u003c\/li\u003e\n\u003cli\u003eCompact and discreet — sits neatly in the original loom without adding clutter\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eClean Installation, Race-Ready Result\u003c\/h2\u003e\u003cp\u003eThe JP ES KIT 02 arrives with OEM-spec connectors that mate directly to the RS 660 wiring loom. There is no need to modify the harness or void your ability to return the bike to road specification. The eliminator mimics the correct electrical load that the ECU expects, silencing the fault indicator on the dashboard instantly. Whether you are preparing for a track day or building a dedicated race machine, this kit removes one more variable from your pre-session checklist.\u003c\/p\u003e\u003ch2\u003ePurpose-Built for the Aprilia RS 660\u003c\/h2\u003e\u003cp\u003eJetPrime engineered and bench-tested this eliminator set exclusively around the RS 660 platform. The result is a direct, confident fit rather than a generic resistor solution that may not address every fault code the Aprilia ECU generates. High-quality internal components ensure the kit handles the thermal and electrical demands of sustained track use without degradation.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis eliminator set is designed exclusively for the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eAprilia RS 660 — model years 2020, 2021, 2022, 2023, 2024, 2025, 2026\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eJetPrime\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eJP ES KIT 02\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eFront \u0026amp; rear light eliminator set\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eAprilia RS 660 (2020-2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnection\u003c\/td\u003e\n\u003ctd\u003eOEM plug-and-play connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eNo wire cutting required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntended Use\u003c\/td\u003e\n\u003ctd\u003eRace\/track use only — not road legal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003eAttention: This product is intended exclusively for motorsport and track use. It is not approved for use on public roads.\u003c\/p\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168760815882,"sku":"JP ES KIT02","price":128.38,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ES_KIT_02.png?v=1780813931"},{"product_id":"jetprime-evap-canister-eliminator-kit-aprilia-rs-660","title":"JetPrime EVAP Canister Eliminator Kit for Aprilia RS 660 (2020-2026) – JP ES KIT10","description":"\u003cp\u003eThe JetPrime EVAP canister eliminator kit JP ES KIT10 is the cleanest, most practical solution for removing the emissions system from your Aprilia RS 660. Designed and validated specifically for the 2020-2026 RS 660, it suppresses the associated Fi fault codes at the source — no warning lights, no repeated dealer visits, no wiring headaches.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCompletely eliminates the EVAP system, including the activated charcoal canister, purge valve and all associated hoses, freeing up space and reducing weight in the airbox area.\u003c\/li\u003e\n\u003cli\u003eSuppresses all Fi fault codes linked to the purge valve, keeping your dashboard clean after the EVAP system is removed.\u003c\/li\u003e\n\u003cli\u003eServes as a direct replacement for a failed or leaking purge valve, resolving persistent fault codes without sourcing expensive OEM parts.\u003c\/li\u003e\n\u003cli\u003ePlug-and-play installation using an OEM-matched connector — no wire cutting, no splicing, no specialist tools required.\u003c\/li\u003e\n\u003cli\u003eHeat-resistant rubber caps protect open ports against the harsh thermal environment of the RS 660 engine bay, ensuring long-term reliability.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality \u0026amp; Engineering\u003c\/h2\u003e\u003cp\u003eJetPrime developed the JP ES KIT10 exclusively for the Aprilia RS 660 platform, which means every connector, cap and routing instruction is matched to the factory harness and airbox layout. The OEM-spec connector slots directly into the purge valve socket, so the ECU sees a clean signal and stops generating EVAP-related error codes. Heat-resistant rubber caps seal the vacated hose ports, preventing dirt ingress and maintaining correct pressure balance elsewhere in the intake circuit.\u003c\/p\u003e\u003ch2\u003eEveryday Usability \u0026amp; Value\u003c\/h2\u003e\u003cp\u003eUnlike some track-day modifications that demand hours of labour or specialist wiring knowledge, the JP ES KIT10 can be fitted in a single session without cutting a single wire. Because it plugs directly into the existing harness, the process is fully reversible — a genuine advantage for riders who want the flexibility to return the bike to a standard state. The kit also removes a common source of fault codes that can trigger unnecessarily on lightly modified RS 660 street bikes, making it a cost-effective diagnostic fix as much as a performance upgrade.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis kit is developed and tested specifically for the following motorcycle:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eAprilia RS 660 — model years 2020, 2021, 2022, 2023, 2024, 2025, 2026\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003ePlease verify your model year before ordering. This product is intended for race use only and is not approved for use on public roads.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: JetPrime\u003c\/li\u003e\n\u003cli\u003ePart number: JP ES KIT10\u003c\/li\u003e\n\u003cli\u003eType: EVAP canister eliminator kit\u003c\/li\u003e\n\u003cli\u003eFitment: Aprilia RS 660 (2020-2026)\u003c\/li\u003e\n\u003cli\u003eConnection: OEM-matched plug-and-play connector\u003c\/li\u003e\n\u003cli\u003eInstallation: No wire cutting required\u003c\/li\u003e\n\u003cli\u003eIntended use: Race use only — not road legal\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168760848650,"sku":"JP ES KIT10","price":25.88,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ES_KIT10.png?v=1780813931"},{"product_id":"jetprime-rear-brake-light-eliminator-aprilia-rs-660","title":"JetPrime Rear Brake Light Eliminator for Aprilia RS 660 (2020-2026) – JP ES 009","description":"\u003cp\u003eWhen you strip the Aprilia RS 660 back to its racing essentials, the last thing you need is a dashboard error code nagging you around every lap. The JetPrime JP ES 009 is a precision-engineered rear brake light eliminator built specifically for the RS 660 (2020-2026), using OEM-matched connectors and high-grade components to bypass the rear brake light circuit and silence dashboard fault warnings without cutting a single wire.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBypasses the rear brake light circuit cleanly, eliminating the need for the original unit on track-prepared machines\u003c\/li\u003e\n\u003cli\u003eDeactivates dashboard error warnings triggered by brake light removal, keeping your instrument cluster clean and distraction-free\u003c\/li\u003e\n\u003cli\u003ePlug-and-play installation using an OEM-specification connector — no wire cutting, no splicing, no specialist tools required\u003c\/li\u003e\n\u003cli\u003eDeveloped and tested exclusively for the Aprilia RS 660 model years 2020 to 2026, ensuring a perfect electrical match\u003c\/li\u003e\n\u003cli\u003ePremium internal components selected for long service life under the heat and vibration demands of competitive riding\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Premium Materials\u003c\/h2\u003e\u003cp\u003eJetPrime has built its reputation on producing electronics that meet the exacting standards of track preparation, and the JP ES 009 is no exception. Every connector in this kit is manufactured to OEM tolerances, meaning the fit is precise and the electrical contact is secure from the moment you plug it in. The quality of the internal components is deliberately matched to the demands of motorsport use — resisting heat cycles, vibration and the general harshness of a machine being pushed at the limit. There is no compromise here: this is not a generic resistor wired into a generic connector. It is a purpose-built solution for one specific motorcycle.\u003c\/p\u003e\u003ch2\u003eInstallation and Performance\u003c\/h2\u003e\u003cp\u003eFitting the JP ES 009 takes minutes. The OEM-style plug connects directly into the existing wiring loom at the rear brake light location, with no modifications to your harness. Once connected, the eliminator presents the correct resistance to the ECU, preventing any fault code from appearing on the dashboard. The result is a clean, fully functional instrument display with no error lights, and a rear end freed from components that serve no purpose on a closed circuit. The plug-and-play design also means the process is fully reversible should you wish to return the bike to road configuration.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis eliminator is designed and validated for the following application:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eAprilia RS 660 — model years 2020, 2021, 2022, 2023, 2024, 2025, 2026\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eImportant Notice\u003c\/h2\u003e\u003cp\u003eThis product is intended exclusively for motorsport and closed-circuit racing use. It is not approved for use on public roads.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: JetPrime\u003c\/li\u003e\n\u003cli\u003ePart number: JP ES 009\u003c\/li\u003e\n\u003cli\u003eType: Rear brake light eliminator\u003c\/li\u003e\n\u003cli\u003eFitment: Aprilia RS 660 (2020-2026)\u003c\/li\u003e\n\u003cli\u003eConnection: OEM-specification plug-and-play connector\u003c\/li\u003e\n\u003cli\u003eInstallation: No wire cutting required\u003c\/li\u003e\n\u003cli\u003eIntended use: Motorsport \/ closed-circuit racing only\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168760881418,"sku":"JP ES 009","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ES_009.png?v=1780813932"},{"product_id":"jetprime-sls-solenoid-eliminator-aprilia-rs-660","title":"JetPrime SLS Solenoid Eliminator for Aprilia RS 660 (2020-2026) – JP ES 007","description":"\u003cp\u003eRunning a stripped-down RS 660 on track means the secondary air system is dead weight — and the dashboard knows it. The JetPrime JP ES 007 SLS solenoid eliminator lets you bypass the PAIR circuit solenoid valve cleanly and permanently silence the fault codes that follow, keeping your instrument cluster clean and your focus on the riding.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBypasses the SLS PAIR circuit solenoid valve, eliminating the root cause of secondary air system fault codes\u003c\/li\u003e\n\u003cli\u003eSuppresses dashboard error warnings triggered by SLS system removal or bypass\u003c\/li\u003e\n\u003cli\u003ePlug-and-play design — no wire cutting, no splicing, no irreversible modifications to the harness\u003c\/li\u003e\n\u003cli\u003eShips with an OEM-matched connector for a direct, secure connection\u003c\/li\u003e\n\u003cli\u003eDeveloped and tested specifically for the Aprilia RS 660 (2020-2026) to guarantee a precise fit first time\u003c\/li\u003e\n\u003cli\u003ePremium-grade components engineered for long-term reliability under race conditions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eClean Install, Lasting Reliability\u003c\/h2\u003e\u003cp\u003eThe JP ES 007 arrives ready to fit. The OEM-spec connector slots straight into the existing loom without adapters or modifications, which means the install is straightforward even in a race-day paddock environment. Because no wires are cut, the bike can be returned to standard specification whenever required. The quality of materials used ensures the unit holds up race after race without degradation in performance or connection integrity.\u003c\/p\u003e\u003ch2\u003eWhy Remove the SLS System?\u003c\/h2\u003e\u003cp\u003eThe secondary air system on the Aprilia RS 660 is designed to reduce exhaust emissions under road legislation. On a dedicated track machine — running a full exhaust system or a lightweight fairing kit — the solenoid valve is often removed as part of the preparation process. Without an eliminator in place, the ECU registers an open circuit at the solenoid and triggers a persistent fault code. The JetPrime eliminator presents the correct load to the ECU, neutralising the error and allowing the bike to run without interruption from warning lights.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eDesigned exclusively for the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eAprilia RS 660 — model years 2020, 2021, 2022, 2023, 2024, 2025, 2026\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: JetPrime\u003c\/li\u003e\n\u003cli\u003ePart number: JP ES 007\u003c\/li\u003e\n\u003cli\u003eType: SLS solenoid eliminator\u003c\/li\u003e\n\u003cli\u003eFunction: Bypasses SLS PAIR circuit solenoid valve and suppresses dashboard fault codes\u003c\/li\u003e\n\u003cli\u003eConnection: OEM-matched plug-and-play connector\u003c\/li\u003e\n\u003cli\u003eInstallation: No wire cutting required\u003c\/li\u003e\n\u003cli\u003eIntended use: Race\/track use only — not approved for road use\u003c\/li\u003e\n\u003cli\u003eFitment: Aprilia RS 660 (2020-2026)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCaution: This product is intended exclusively for motorsport and track use. It is not approved for use on public roads.\u003c\/p\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168760946954,"sku":"JP ES 007","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ES_007.png?v=1780813937"},{"product_id":"jetprime-tail-light-eliminator-aprilia-rs-660","title":"JetPrime Tail Light Eliminator for Aprilia RS 660 (2020-2026) – JP ES 004","description":"\u003cp\u003eDesigned and built exclusively for the Aprilia RS 660, the JetPrime JP ES 004 tail light eliminator kit suppresses dashboard fault codes the moment an aftermarket tail tidy or race seat unit removes the OEM rear light cluster — no guesswork, no dashboard warnings, no cutting of original wiring harnesses.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCancels dashboard fault codes generated by removal of the stock tail light assembly on the Aprilia RS 660 (2020–2026)\u003c\/li\u003e\n\u003cli\u003eGenuine OEM-specification connector supplied — plugs directly into the factory harness with a precise, rattle-free fit\u003c\/li\u003e\n\u003cli\u003eTrue plug-and-play installation: no wire cutting, no soldering, no ECU intervention required\u003c\/li\u003e\n\u003cli\u003eEngineered and validated specifically for the RS 660 platform — not a generic resistor kit adapted from another model\u003c\/li\u003e\n\u003cli\u003ePremium-grade components selected for long-term reliability under race and track-day conditions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Materials\u003c\/h2\u003e\u003cp\u003eJetPrime built their reputation on producing electronics that match or exceed OEM construction standards, and the JP ES 004 is no exception. The connector housing is manufactured to OEM tolerances so it engages the factory loom with the same positive click and sealing integrity as the original plug. Internal components are rated for the vibration and thermal cycling typical of a high-revving inline twin on track, meaning the eliminator will not degrade or introduce intermittent faults over time. This is not a cheap resistor wrapped in heat-shrink — it is a properly engineered signal-correction module built to last the life of the bike.\u003c\/p\u003e\u003ch2\u003eInstallation and Use\u003c\/h2\u003e\u003cp\u003eFitting the JP ES 004 takes minutes. Disconnect the OEM tail light loom plug, connect the JetPrime eliminator in its place using the supplied OEM-matched connector, and secure the unit in the tail section. The dashboard will read a correctly terminated circuit and suppress the fault lamp immediately. No dealer diagnostic tool or software update is needed after installation. The kit is optimised for race and track-day use where a lightweight aftermarket seat unit or tail tidy replaces the full factory rear assembly.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis eliminator is designed and tested for the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eAprilia RS 660 — all variants, model years 2020 to 2026\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eIt is not intended for fitment to other Aprilia models or any other manufacturer's motorcycles without independent verification of connector and circuit compatibility.\u003c\/p\u003e\u003ch2\u003eSafety Notice\u003c\/h2\u003e\u003cp\u003eThe JetPrime JP ES 004 tail light eliminator is intended exclusively for competition and track use. It is not approved for road use and must not be fitted to any motorcycle operated on public roads.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: JetPrime\u003c\/li\u003e\n\u003cli\u003ePart number: JP ES 004\u003c\/li\u003e\n\u003cli\u003eType: Tail light eliminator \/ dashboard fault code suppressor\u003c\/li\u003e\n\u003cli\u003eConnection type: OEM-specification plug-and-play connector\u003c\/li\u003e\n\u003cli\u003eInstallation: No wire cutting required\u003c\/li\u003e\n\u003cli\u003eFitment: Aprilia RS 660 (2020–2026)\u003c\/li\u003e\n\u003cli\u003eIntended use: Race and track use only — not road legal\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168761078026,"sku":"JP ES 004","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ES_004.png?v=1780813945"},{"product_id":"jetprime-headlight-eliminator-aprilia-rs-660","title":"JetPrime Headlight Eliminator for Aprilia RS 660 (2020-2026) – JP ES 006","description":"\u003cp\u003eRunning the Aprilia RS 660 without its front headlight — whether for track days, race preparation or a lightweight build — normally triggers a persistent dashboard fault warning. The JetPrime JP ES 006 headlight eliminator resolves that instantly with a clean plug-and-play connection that requires no cutting, splicing or guesswork, letting you focus entirely on the ride.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEliminates dashboard fault warnings caused by a disconnected or removed front headlight\u003c\/li\u003e\n\u003cli\u003ePlug-and-play installation using a direct OEM-matched connector — no wire cutting required\u003c\/li\u003e\n\u003cli\u003eDesigned and tested specifically for the Aprilia RS 660 (2020-2026) for a guaranteed fit\u003c\/li\u003e\n\u003cli\u003eHigh-quality components ensure lasting reliability under race and track conditions\u003c\/li\u003e\n\u003cli\u003eCompact, discreet unit that integrates neatly into the existing loom\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEffortless Installation, Clean Results\u003c\/h2\u003e\u003cp\u003eThe JP ES 006 arrives ready to install straight out of the packaging. The OEM-spec connector mates directly with the RS 660's headlight harness plug, so the entire job takes minutes and leaves no permanent modifications to the motorcycle's wiring. Once fitted, the instrument cluster reads the circuit as complete and all fault indicators clear immediately.\u003c\/p\u003e\u003ch2\u003eBuilt to Race Standards\u003c\/h2\u003e\u003cp\u003eJetPrime manufactures each eliminator to the same exacting standards applied across their full range of race electronics. Premium internal components handle the electrical load reliably session after session, making the JP ES 006 a sensible long-term investment for any RS 660 used on circuit.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis eliminator is designed exclusively for the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eAprilia RS 660 — model years 2020, 2021, 2022, 2023, 2024, 2025, 2026\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eImportant Notice\u003c\/h2\u003e\u003cp\u003eThis product is intended for race and track use only. It is not approved for use on public roads.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: JetPrime\u003c\/li\u003e\n\u003cli\u003ePart number: JP ES 006\u003c\/li\u003e\n\u003cli\u003eType: Front headlight eliminator\u003c\/li\u003e\n\u003cli\u003eFitment: Aprilia RS 660 (2020-2026)\u003c\/li\u003e\n\u003cli\u003eConnection: OEM plug-and-play connector\u003c\/li\u003e\n\u003cli\u003eInstallation: No wire cutting required\u003c\/li\u003e\n\u003cli\u003eIntended use: Race and track use only\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168761110794,"sku":"JP ES 006","price":113.88,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ES_006.png?v=1780813949"},{"product_id":"jetprime-side-stand-eliminator-aprilia-rs-660","title":"JetPrime Side Stand Eliminator for Aprilia RS 660 (2020-2026) – JP ES 001","description":"\u003cp\u003eBypass your side stand switch and silence those frustrating dashboard fault codes in one clean, no-cut installation. The JetPrime JP ES 001 side stand eliminator is engineered specifically for the Aprilia RS 660 across model years 2020 to 2026, giving track-day riders a plug-and-play solution that removes a common source of electrical gremlins without compromising the rest of the bike's wiring.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCompletely bypasses the side stand switch, eliminating switch-related interruptions to the ignition circuit\u003c\/li\u003e\n\u003cli\u003eSuppresses dashboard fault codes triggered by side stand switch removal or failure — no warning lights, no error messages\u003c\/li\u003e\n\u003cli\u003eTrue plug-and-play fitment using an OEM-spec connector: no wire cutting, no splicing, no irreversible modifications\u003c\/li\u003e\n\u003cli\u003eDeveloped and tested exclusively for the Aprilia RS 660 (2020-2026) to guarantee a clean, reliable connection first time\u003c\/li\u003e\n\u003cli\u003ePremium-grade components throughout for long-term durability under demanding race conditions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eClean Installation, Zero Compromise\u003c\/h2\u003e\u003cp\u003eUnlike generic bypass solutions, the JP ES 001 uses a factory-matched OEM connector that locates exactly where the original side stand switch plugs in. The entire installation is reversible — unplug the eliminator and refit the original switch at any time. There is no need to access the wiring loom, use heat-shrink joints, or consult an auto-electrician. For club racers preparing a machine between sessions in the paddock, that simplicity matters.\u003c\/p\u003e\u003ch2\u003eWhy Eliminate the Side Stand Switch?\u003c\/h2\u003e\u003cp\u003eOn track, the Aprilia RS 660's side stand switch can be a source of nuisance fault codes, particularly after the side stand is removed for competition regulations or after prolonged vibration causes contact issues. The JetPrime eliminator resolves this cleanly, allowing the ECU to operate without logging switch-related faults that would otherwise flag on the dashboard and potentially mask genuine issues during a race weekend.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eDesigned and validated for the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eAprilia RS 660 — model years 2020, 2021, 2022, 2023, 2024, 2025, 2026\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003ePlease verify your model year before fitting. This product is intended for race use only and is not approved for road use.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eJetPrime\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eJP ES 001\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eSide stand switch eliminator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eAprilia RS 660 (2020-2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnection\u003c\/td\u003e\n\u003ctd\u003eOEM plug-and-play connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eNo wire cutting required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntended Use\u003c\/td\u003e\n\u003ctd\u003eRace \/ track use only — not approved for road use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168761241866,"sku":"JP ES 001","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ES_001.png?v=1780813953"},{"product_id":"jetprime-sls-pair-circuit-solenoid-eliminator-aprilia-rsv4-rsv4-1100","title":"JetPrime SLS PAIR Circuit Solenoid Eliminator for Aprilia RSV4 \/ RSV4 1100 Factory \/ R \/ RR \/ RF (2009-2026) – JP ES 007","description":"\u003cp\u003eDesigned and validated exclusively for competition use, the JetPrime JP ES 007 SLS solenoid eliminator gives Aprilia RSV4 and RSV4 1100 owners a clean, legally compliant solution for race-prepared machines. By bypassing the secondary air system (SLS-PAIR) solenoid valve and simultaneously suppressing the resulting dashboard fault codes, it eliminates a persistent source of ECU confusion without cutting a single wire.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBypasses the SLS-PAIR circuit solenoid valve cleanly and completely, removing the secondary air system from the engine management loop.\u003c\/li\u003e\n\u003cli\u003eSuppresses dashboard error codes triggered by SLS system removal, keeping the instrument cluster clean on track.\u003c\/li\u003e\n\u003cli\u003eTrue plug-and-play installation via OEM-spec connector — no wire cutting, no soldering, no irreversible modification.\u003c\/li\u003e\n\u003cli\u003eDeveloped and dyno-tested specifically for the Aprilia RSV4 and RSV4 1100 platform across the full 2009-2026 model range.\u003c\/li\u003e\n\u003cli\u003ePremium-grade components throughout ensure long service life under the thermal and electrical stresses of race use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eRace-Ready Engineering\u003c\/h2\u003e\u003cp\u003eThe JP ES 007 is not a generic resistor plug. JetPrime engineered this eliminator with an OEM-matched connector that seats exactly as the factory solenoid did, meaning the harness remains undisturbed and the bike can be returned to standard specification if required. The high-quality internals replicate the correct electrical load seen by the ECU, which is why the dashboard remains fault-free once the unit is fitted — a detail that generic alternatives frequently miss.\u003c\/p\u003e\u003ch2\u003eWhy Remove the SLS System?\u003c\/h2\u003e\u003cp\u003eThe secondary air (SLS) system injects filtered air into the exhaust ports to reduce cold-start emissions. On a track-prepared RSV4 running an aftermarket exhaust or race fuel map, the system becomes redundant and can introduce unwanted variables into exhaust gas behaviour and throttle response. Removing it neatly with the JP ES 007 tidies up the engine bay and allows the fuelling calibration to work without interference from secondary air pulses.\u003c\/p\u003e\u003ch2\u003eSafety \u0026amp; Compliance Notice\u003c\/h2\u003e\u003cp\u003eThis product is approved for race and closed-circuit competition use only. It is not approved for use on public roads and must not be fitted to any motorcycle intended for road registration or road use. Always verify that your intended application complies with the regulations of your racing series before fitting.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThe JP ES 007 is engineered to fit the following Aprilia models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAprilia RSV4 (2009-2026)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 R (2009-2026)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 RR (2009-2026)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 RF (2009-2026)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 1100 (2009-2026)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 1100 Factory (2009-2026)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: JetPrime\u003c\/li\u003e\n\u003cli\u003ePart number: JP ES 007\u003c\/li\u003e\n\u003cli\u003eType: SLS PAIR circuit solenoid eliminator\u003c\/li\u003e\n\u003cli\u003eConnector: OEM-specification plug-and-play connector\u003c\/li\u003e\n\u003cli\u003eInstallation: Plug-and-play, no wire cutting required\u003c\/li\u003e\n\u003cli\u003eIntended use: Race \/ closed-circuit competition only — not road legal\u003c\/li\u003e\n\u003cli\u003eFitment: Aprilia RSV4 \/ RSV4 1100 Factory \/ R \/ RR \/ RF (2009-2026)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168761307402,"sku":"JP ES 007","price":15.22,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ES_007_6ad70ea2-7f11-4912-9325-64475fc919e5.png?v=1780813957"},{"product_id":"jetprime-headlight-eliminator-aprilia-rsv4-rr-1100-factory-2021-2026","title":"JetPrime Headlight Eliminator for Aprilia RSV4 \/ RR \/ 1100 Factory 2021-2026 – JP ES 006","description":"\u003cp\u003eStrip the clutter from your dashboard without cutting a single wire. The JetPrime JP ES 006 headlight eliminator is engineered specifically for the Aprilia RSV4, RSV4 RR, and RSV4 1100 Factory (2021–2026), suppressing the headlight fault warning at its source and delivering a clean, error-free instrument display that belongs on a race-prepared machine.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEliminates headlight-related dashboard fault warnings on compatible Aprilia RSV4 models instantly\u003c\/li\u003e\n\u003cli\u003eTrue plug-and-play fitment using an OEM-spec connector — no wire cutting, no soldering, no permanent modification\u003c\/li\u003e\n\u003cli\u003ePurpose-designed and tested exclusively for the Aprilia RSV4 \/ RSV4 RR \/ RSV4 1100 Factory (2021–2026)\u003c\/li\u003e\n\u003cli\u003eHigh-quality components selected for long-term durability and consistent reliability under race conditions\u003c\/li\u003e\n\u003cli\u003eCompact, discreet form factor that tucks away cleanly once installed\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign, Finish and Heritage\u003c\/h2\u003e\u003cp\u003eJetPrime has built its reputation on precision electronics developed for the demands of competitive motorcycling. The JP ES 006 reflects that heritage: rather than a generic resistor bodged into the loom, this is a purpose-built eliminator module supplied with an OEM-matching connector. The engineering focus is on a clean, reversible installation that respects the integrity of the Aprilia's wiring harness while delivering a professional result that would not look out of place on a full track-day or competition build.\u003c\/p\u003e\u003ch2\u003ePerformance on Track\u003c\/h2\u003e\u003cp\u003eWhen a headlight is removed for track use, the RSV4's ECU registers an open circuit and flags a fault on the dashboard. Left unaddressed, that warning occupies valuable real estate on the instrument cluster and can mask other alerts during a session. The JP ES 006 presents the correct load to the ECU, keeping the dashboard clear and allowing the rider to focus entirely on the data that matters. Installation is straightforward enough to complete in the paddock without specialist tools.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis eliminator is designed and validated for the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAprilia RSV4 (2021–2026)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 RR (2021–2026)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 1100 Factory (2021–2026)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAlways verify the model year and variant before fitting. If in doubt, contact Inter-Pace with your VIN for confirmation.\u003c\/p\u003e\u003ch2\u003eImportant Notice\u003c\/h2\u003e\u003cp\u003eThis product is approved for race and track use only. It is not road-legal and must not be used on public roads.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: JetPrime\u003c\/li\u003e\n\u003cli\u003ePart number: JP ES 006\u003c\/li\u003e\n\u003cli\u003eType: Headlight eliminator \/ fault suppressor\u003c\/li\u003e\n\u003cli\u003eInstallation: Plug-and-play, OEM connector supplied\u003c\/li\u003e\n\u003cli\u003eFitment: Aprilia RSV4, RSV4 RR, RSV4 1100 Factory (2021–2026)\u003c\/li\u003e\n\u003cli\u003eIntended use: Race and track use only — not road-legal\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168761340170,"sku":"JP ES 006","price":113.88,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ES_006_453aa349-4356-4463-8793-2374f2255113.png?v=1780813959"},{"product_id":"jetprime-tail-light-eliminator-aprilia-rsv4-rr-1100-factory","title":"JetPrime Tail Light Eliminator for Aprilia RSV4 \/ RR \/ 1100 Factory (2021-2026) – JP ES 004","description":"\u003cp\u003eRunning a tail tidy or a race plate holder on your Aprilia RSV4, RSV4 RR or RSV4 1100 Factory should never mean living with an irritating dashboard fault. The JetPrime JP ES 004 tail light eliminator is engineered specifically for 2021-2026 RSV4 variants, cancelling the instrument cluster error the moment you remove the stock tail light — so the cockpit stays clean and the ride stays focused.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEliminates dashboard fault codes triggered by tail light removal on RSV4 \/ RR \/ 1100 Factory (2021-2026)\u003c\/li\u003e\n\u003cli\u003ePlug-and-play fitment using OEM-matched connectors — no wire cutting, no soldering, no permanent modification\u003c\/li\u003e\n\u003cli\u003eDesigned and validated exclusively for the Aprilia RSV4 platform, ensuring a precise electrical match\u003c\/li\u003e\n\u003cli\u003eHigh-quality components selected for long-term reliability under race conditions\u003c\/li\u003e\n\u003cli\u003eReversible installation keeps the original wiring harness completely intact\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePlug-and-Play Simplicity\u003c\/h2\u003e\u003cp\u003eThe JP ES 004 arrives with an OEM-spec connector that slots directly into the factory loom. There is no need to cut, splice or tape a single wire. The eliminator sits discreetly behind the tail unit, and the instrument cluster behaves exactly as it did with the original lamp fitted — minus the fault warning. Installation takes minutes, and the bike can be returned to stock just as quickly if required.\u003c\/p\u003e\u003ch2\u003eRace-Grade Build Quality\u003c\/h2\u003e\u003cp\u003eJetPrime developed the JP ES 004 alongside their tail tidy and licence plate holder range, meaning the electrical load simulation is matched precisely to what the RSV4's ECU expects. Premium-grade components ensure the unit holds up to the vibration, heat and humidity typical of track use, session after session.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThe JP ES 004 fits the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAprilia RSV4 (2021-2026)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 RR (2021-2026)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 1100 Factory (2021-2026)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNote: This product is intended exclusively for racing and track use. It is not approved for road use.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: JetPrime\u003c\/li\u003e\n\u003cli\u003ePart number: JP ES 004\u003c\/li\u003e\n\u003cli\u003eType: Tail light eliminator\u003c\/li\u003e\n\u003cli\u003eInstallation: Plug-and-play, OEM connector\u003c\/li\u003e\n\u003cli\u003eFitment: Aprilia RSV4 \/ RSV4 RR \/ RSV4 1100 Factory (2021-2026)\u003c\/li\u003e\n\u003cli\u003eIntended use: Track \/ race use only — not road legal\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168761471242,"sku":"JP ES 004","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ES_004_31860d15-cffb-4e53-8f76-67b0c5000294.png?v=1780813965"},{"product_id":"jetprime-canister-eliminator-system-aprilia-rsv4-rr-1100-factory","title":"JetPrime Canister Eliminator System for Aprilia RSV4\/RR\/1100 Factory (2021-2026) – JP ES 002","description":"\u003cp\u003eDesigned exclusively for track and competition use, the JetPrime Canister Eliminator Kit JP ES 002 gives Aprilia RSV4, RSV4 RR and RSV4 1100 Factory riders (2021–2026) a clean, code-free solution for removing the entire EVAP system. Engineered and validated specifically for these models, it eliminates the activated charcoal canister, the electronic purge valve and all associated EVAP hoses without cutting a single wire.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFully suppresses the fuel-injection fault codes associated with the EVAP purge valve, keeping the ECU clean after removal\u003c\/li\u003e\n\u003cli\u003eServes as a direct replacement for a failed or degraded purge valve, ending nuisance fault codes at source\u003c\/li\u003e\n\u003cli\u003eEnables complete removal of the EVAP canister, activated charcoal filter and all related hoses for a tidier engine bay\u003c\/li\u003e\n\u003cli\u003eTrue plug-and-play installation using an OEM-spec connector — no wire cutting, no splicing, no permanent modification to the loom\u003c\/li\u003e\n\u003cli\u003eHeat-resistant rubber caps protect open hose ends against the demanding thermal environment of a race-prepared V4\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality \u0026amp; Engineering\u003c\/h2\u003e\u003cp\u003eJetPrime developed the JP ES 002 through dedicated testing on the Aprilia RSV4 platform rather than adapting a generic unit. The electronic purge-valve eliminator ships with an OEM-matched connector that clips directly into the factory harness, ensuring a secure, rattle-free connection. Heat-resistant rubber caps seal the vacated hose ports against moisture, debris and the considerable heat generated by a tuned V4 in track trim. Every component in the kit is selected to guarantee long-term durability under race conditions — not just for a single event, but across a full season of use.\u003c\/p\u003e\u003ch2\u003eInstallation \u0026amp; Practical Use\u003c\/h2\u003e\u003cp\u003eBecause the JP ES 002 is a genuine plug-and-play unit, installation requires no specialist wiring knowledge. Unplug the factory purge-valve connector, plug in the JetPrime eliminator, cap the open hose ports and remove the canister assembly. The ECU recognises the replacement signal, fault codes remain dormant and the bike is ready to run. The result is a cleaner subframe area, marginal weight reduction from the removed canister assembly and an engine management system free of spurious EVAP-related warnings during track sessions.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThe JetPrime JP ES 002 is developed and tested for the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAprilia RSV4 — 2021, 2022, 2023, 2024, 2025, 2026\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 RR — 2021, 2022, 2023, 2024, 2025, 2026\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 1100 Factory — 2021, 2022, 2023, 2024, 2025, 2026\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNote: This kit is approved for race and competition use only. It is not road-legal and must not be used on public roads.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: JetPrime\u003c\/li\u003e\n\u003cli\u003ePart number: JP ES 002\u003c\/li\u003e\n\u003cli\u003eType: EVAP canister eliminator kit\u003c\/li\u003e\n\u003cli\u003eConnector type: OEM-specification direct-fit connector\u003c\/li\u003e\n\u003cli\u003eInstallation: Plug-and-play, no wire cutting required\u003c\/li\u003e\n\u003cli\u003eFitment: Aprilia RSV4 \/ RSV4 RR \/ RSV4 1100 Factory (2021–2026)\u003c\/li\u003e\n\u003cli\u003eIntended use: Race and competition only — not road-legal\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168761536778,"sku":"JP ES 002","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ES_002.png?v=1780813969"},{"product_id":"jetprime-sls-solenoid-eliminator-ducati-panigale-959","title":"JetPrime SLS Solenoid Eliminator for Ducati Panigale 959 (2016-2019) – JP ES 007","description":"\u003cp\u003eChasing clean dashboard readings and consistent engine behaviour on your Ducati Panigale 959? The JetPrime Eliminator JP ES 007 bypasses the SLS-PAIR solenoid valve and simultaneously suppresses the fault codes that appear on your dashboard whenever the secondary air system is removed or disabled — delivering a cleaner, more reliable setup without cutting a single wire.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBypasses the SLS-PAIR solenoid valve completely, eliminating the root cause of secondary-air-related fault codes\u003c\/li\u003e\n\u003cli\u003eSuppresses dashboard error lights that appear after removing or disabling the SLS system — no more warning lamp distractions on track\u003c\/li\u003e\n\u003cli\u003ePlug-and-play installation using OEM-spec connectors — no wire cutting, no splicing, no permanent modifications\u003c\/li\u003e\n\u003cli\u003eDeveloped and validated specifically for the Ducati Panigale 959 (2016-2019), ensuring a direct, confident fit\u003c\/li\u003e\n\u003cli\u003ePremium-grade components selected for long service life under the thermal and vibration demands of race use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eRace-Ready Engineering\u003c\/h2\u003e\u003cp\u003eThe JP ES 007 is engineered around a precision solenoid eliminator circuit that mimics the load signature of the original SLS solenoid. This means the ECU sees exactly what it expects, suppressing fault codes at source rather than simply masking them. The result is a stable, error-free dashboard and an engine management system that operates as intended — even after the secondary air system has been removed as part of a full track-preparation programme.\u003c\/p\u003e\u003cp\u003eInstallation takes minutes. The unit arrives pre-assembled with a factory-style OEM connector that mates directly with the Panigale 959 wiring harness. No crimping tools, no soldering iron, no risk of damaged wires — simply unplug the original solenoid and plug in the JP ES 007 in its place.\u003c\/p\u003e\u003ch2\u003eQuality and Durability\u003c\/h2\u003e\u003cp\u003eJetPrime selects components for the JP ES 007 that are rated to withstand the elevated temperatures found in the engine bay of a Panigale 959 under sustained track use. The assembly is compact and neatly packaged so it can be routed and secured without interference with surrounding components. Every unit is tested before dispatch to ensure correct electrical behaviour.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis eliminator is designed exclusively for the following motorcycle:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDucati Panigale 959 — model years 2016, 2017, 2018, 2019\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003ePlease verify your model year before ordering. This product is not compatible with other Ducati models without confirmation from JetPrime.\u003c\/p\u003e\u003ch2\u003eImportant Safety Notice\u003c\/h2\u003e\u003cp\u003eThe JetPrime JP ES 007 is intended exclusively for closed-circuit racing use. It is not approved for use on public roads and must not be fitted to any motorcycle operated in road traffic.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: JetPrime\u003c\/li\u003e\n\u003cli\u003ePart number: JP ES 007\u003c\/li\u003e\n\u003cli\u003eType: SLS solenoid eliminator\u003c\/li\u003e\n\u003cli\u003eFunction: Bypasses SLS-PAIR solenoid valve and suppresses dashboard fault codes\u003c\/li\u003e\n\u003cli\u003eConnector: OEM-type plug-and-play connector\u003c\/li\u003e\n\u003cli\u003eInstallation: No wire cutting required\u003c\/li\u003e\n\u003cli\u003eFitment: Ducati Panigale 959 (2016-2019)\u003c\/li\u003e\n\u003cli\u003eIntended use: Closed-circuit racing only — not road legal\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168762519818,"sku":"JP ES 007","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ES_007_7b2971f9-d8b8-4e68-8b3f-8cffc2c43ee8.png?v=1780814005"},{"product_id":"jetprime-side-stand-eliminator-ducati-panigale-959","title":"JetPrime Side Stand Eliminator for Ducati Panigale 959 (2016-2019) – JP ES 011","description":"\u003cp\u003eDesigned exclusively for track and racing use, the JetPrime JP ES 011 side stand eliminator lets you remove the side stand switch from your Ducati Panigale 959 without triggering dashboard fault codes — giving you a clean, distraction-free cockpit when every second on circuit counts.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBypasses the side stand switch entirely, eliminating the risk of an accidental cut-out on track\u003c\/li\u003e\n\u003cli\u003eSuppresses dashboard fault codes that would otherwise appear after switch removal — no warning lights, no interruptions\u003c\/li\u003e\n\u003cli\u003ePlug-and-play fitment using an OEM-matched connector: no wire cutting, no splicing, no permanent modification\u003c\/li\u003e\n\u003cli\u003eDeveloped and tested specifically for the Ducati Panigale 959 (2016-2019) — guaranteed compatibility\u003c\/li\u003e\n\u003cli\u003eHigh-quality components chosen for long-term reliability under race conditions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTrack-Ready Engineering\u003c\/h2\u003e\u003cp\u003eWhen you are preparing a Ducati Panigale 959 for circuit work, the side stand switch is one of the first items that needs addressing. Left in place, it can cause unexpected engine cut-outs and trigger fault codes the moment the stand is removed or the wiring is disturbed. The JetPrime JP ES 011 resolves this cleanly: the OEM-style connector slots straight into the factory harness, the eliminator module tells the ECU everything is normal, and you are free to focus on lap times rather than dashboard warnings.\u003c\/p\u003e\u003cp\u003eThe unit requires no irreversible changes to the wiring loom. Should you ever need to return the bike to road specification, the process is equally straightforward — unplug the JetPrime module and reconnect the original switch.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis eliminator is designed and validated for the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDucati Panigale 959 — model years 2016, 2017, 2018, 2019\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: JetPrime\u003c\/li\u003e\n\u003cli\u003ePart number: JP ES 011\u003c\/li\u003e\n\u003cli\u003eFunction: Side stand switch eliminator with dashboard fault code suppression\u003c\/li\u003e\n\u003cli\u003eConnector type: OEM-matched plug-and-play connector\u003c\/li\u003e\n\u003cli\u003eInstallation: No wire cutting required\u003c\/li\u003e\n\u003cli\u003eFitment: Ducati Panigale 959 (2016-2019)\u003c\/li\u003e\n\u003cli\u003eIntended use: Racing and track use only — not approved for road use\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNotice: This product is intended exclusively for racing and track use. It is not approved for use on public roads.\u003c\/p\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168762552586,"sku":"JP ES 011","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ES_011_841b6c8d-51c8-45d6-8f44-06e9a8fd77be.png?v=1780814006"},{"product_id":"jetprime-evap-eliminator-canister-system-ducati-panigale-959","title":"JetPrime EVAP Eliminator Canister System for Ducati Panigale 959 (2016-2019) – JP ES 002","description":"\u003cp\u003eThe JetPrime JP ES 002 canister eliminator system is engineered with the precision and pedigree you would expect from a brand that has spent years developing electronics solutions for Italian superbikes. Designed exclusively for the Ducati Panigale 959 (2016-2019), this kit strips away the EVAP system cleanly and intelligently, suppressing the associated Fi fault codes so your dash stays clean and your engine runs exactly as it should on track.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRemoves the EVAP canister, electronic purge valve and all associated hoses in a single complete kit\u003c\/li\u003e\n\u003cli\u003eSuppresses the Fi fault codes linked to the purge valve — no warning lights, no diagnostic headaches\u003c\/li\u003e\n\u003cli\u003eDirect OEM-connector fitment throughout — no wire cutting, no splicing, genuinely plug-and-play\u003c\/li\u003e\n\u003cli\u003eHeat-resistant rubber caps seal open hose ends for long-term durability under race conditions\u003c\/li\u003e\n\u003cli\u003eDoubles as a replacement for a failed or leaking purge valve, restoring correct fuelling behaviour\u003c\/li\u003e\n\u003cli\u003eDeveloped and tested specifically for the Panigale 959 (2016-2019) — not a generic solution\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign, Finish and Heritage\u003c\/h2\u003e\u003cp\u003eJetPrime has built a reputation across the Italian and European racing paddock for electronics that are over-engineered by design. The JP ES 002 reflects that philosophy: every connector is OEM-grade, every rubber cap is selected for heat resistance, and the kit arrives ready to install without modification. There are no generic adaptors, no cable ties holding things together — just a thoughtfully assembled package that fits as though the factory made it.\u003c\/p\u003e\u003cp\u003eThe attention to detail carries through to the suppression electronics. Rather than simply unplugging the purge valve and hoping the ECU ignores the open circuit, the JP ES 002 feeds the correct signal back to the ECU so the fault code never appears. It is this kind of considered engineering — rooted in real race preparation experience — that separates JetPrime from catalogue alternatives.\u003c\/p\u003e\u003ch2\u003ePerformance and Track Readiness\u003c\/h2\u003e\u003cp\u003eThe factory EVAP canister and purge valve system adds weight, routing complexity and a potential source of fuelling inconsistency under hard acceleration. Removing it with the JP ES 002 simplifies the under-seat area, reduces the number of serviceable components and eliminates a known failure point on track-prepared 959s. The result is a cleaner engine bay, tidier hose routing and an ECU that no longer has to manage canister purge cycles during performance riding.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis kit is designed and validated for one specific application:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDucati Panigale 959 — model years 2016, 2017, 2018 and 2019\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003ePlease note: the JP ES 002 is intended for closed-circuit, competition use only. It is not approved for road use and should not be fitted to a road-registered motorcycle.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eJetPrime\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eJP ES 002\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eEVAP canister eliminator system\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment\u003c\/th\u003e\n\u003ctd\u003eDucati Panigale 959 (2016-2019)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConnection Type\u003c\/th\u003e\n\u003ctd\u003eOEM plug-and-play connectors — no wire cutting required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eHeat-resistant rubber caps; OEM-grade connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntended Use\u003c\/th\u003e\n\u003ctd\u003eClosed-circuit competition \/ track use only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168762618122,"sku":"JP ES 002","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ES_002_5ed3d60c-b851-47f0-9ec4-07fb2f025883.png?v=1780814011"},{"product_id":"jetprime-sls-solenoid-eliminator-ducati-panigale-1199-r-s","title":"JetPrime SLS Solenoid Eliminator for Ducati Panigale 1199\/R\/S (2012-2017) – JP ES 007","description":"\u003cp\u003eRemoving the secondary air system from your Ducati Panigale 1199 should not mean living with a dashboard full of fault codes. The JetPrime SLS Solenoid Eliminator JP ES 007 bypasses the SLS-PAIR circuit solenoid valve cleanly and silences those error warnings at the same time — all without cutting a single wire. It is the straightforward, cost-effective fix that every 1199 owner who has deleted the SAS system actually needs.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBypasses the SLS-PAIR circuit solenoid valve, eliminating the root cause of secondary air system fault codes\u003c\/li\u003e\n\u003cli\u003eSuppresses dashboard error warnings triggered by SLS system removal — clean instrument display from day one\u003c\/li\u003e\n\u003cli\u003ePlug-and-play design using OEM-spec connectors; no wire cutting or splicing required\u003c\/li\u003e\n\u003cli\u003eStraightforward installation that can be completed without specialist tools or workshop time\u003c\/li\u003e\n\u003cli\u003eEngineered and tested specifically for the Ducati Panigale 1199, 1199 R and 1199 S (2012-2017)\u003c\/li\u003e\n\u003cli\u003eHigh-quality components selected for long-term reliability under race conditions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePractical Value and Everyday Usability\u003c\/h2\u003e\u003cp\u003eFor riders who have already removed or bypassed the secondary air system on their Panigale 1199, the persistent fault codes are an ongoing inconvenience — both on track days and during pre-ride checks. The JP ES 007 addresses this directly. The OEM-compatible connector drops straight into the factory loom, restoring a clean ECU communication signal without any permanent modification to the harness. The result is a tidy, reversible installation that takes minutes rather than hours.\u003c\/p\u003e\u003cp\u003eThe eliminator is built to the same standard as JetPrime's broader range of electronic accessories — components are selected for durability in the demanding thermal environment of a Ducati V-twin, and the unit is designed to remain reliable over the full lifespan of the bike.\u003c\/p\u003e\u003ch2\u003eTrack Application\u003c\/h2\u003e\u003cp\u003eThe JP ES 007 is developed with race and track use firmly in mind. Stripping the SLS-PAIR system is a common step in preparing a Panigale 1199 for circuit work, and this eliminator completes that process properly. Rather than improvised resistor fixes or taped-over connectors, the JetPrime unit provides a purpose-built, tested solution that keeps the ECU operating cleanly.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis eliminator is designed exclusively for the following motorcycles:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale 1199 (2012-2017)\u003c\/li\u003e\n\u003cli\u003eDucati Panigale 1199 R (2012-2017)\u003c\/li\u003e\n\u003cli\u003eDucati Panigale 1199 S (2012-2017)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note: this product is intended for race and track use only and is not approved for road use.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: JetPrime\u003c\/li\u003e\n\u003cli\u003ePart number: JP ES 007\u003c\/li\u003e\n\u003cli\u003eFunction: SLS-PAIR circuit solenoid valve bypass and fault code eliminator\u003c\/li\u003e\n\u003cli\u003eConnector type: OEM-compatible plug-and-play\u003c\/li\u003e\n\u003cli\u003eInstallation: No wire cutting required\u003c\/li\u003e\n\u003cli\u003eFitment: Ducati Panigale 1199 \/ 1199 R \/ 1199 S, 2012-2017\u003c\/li\u003e\n\u003cli\u003eIntended use: Race and track use only\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168763076874,"sku":"JP ES 007","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ES_007_42284125-50a6-459d-9c94-63eb606a689a.png?v=1780814028"},{"product_id":"jetprime-canister-eliminator-system-ducati-panigale-1299-s","title":"JetPrime Canister Eliminator System for Ducati Panigale 1299\/S (2015-2018) – JP ES 002","description":"\u003cp\u003eStripping the Ducati Panigale 1299\/S of its bulky EVAP system is a clean, effective step toward a race-ready specification — and the JetPrime JP ES 002 makes it completely straightforward. Designed and validated specifically for 2015–2018 Panigale 1299 and 1299 S models, this canister eliminator kit removes the activated carbon filter canister, the electronic purge valve, and all associated EVAP hoses in one tidy, plug-and-play procedure, with no wiring cuts required.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEliminates the EVAP system (activated carbon canister) and all related hoses for a cleaner engine bay\u003c\/li\u003e\n\u003cli\u003eDisables the fuel-injection fault codes associated with the purge valve — no warning lights after removal\u003c\/li\u003e\n\u003cli\u003eProvides a direct replacement for a failed or deteriorating purge valve\u003c\/li\u003e\n\u003cli\u003ePlug-and-play fitment using an OEM-spec connector — no cutting or splicing of wiring looms\u003c\/li\u003e\n\u003cli\u003eHeat-resistant rubber caps throughout for lasting durability under race conditions\u003c\/li\u003e\n\u003cli\u003eEngineered and track-tested exclusively for the Ducati Panigale 1299\/S (2015–2018)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality \u0026amp; Engineering\u003c\/h2\u003e\u003cp\u003eEvery component in the JP ES 002 kit is selected to withstand the thermal and mechanical demands of track use. The electronic purge-valve eliminator module ships with a factory-compatible OEM connector, ensuring a seamless drop-in interface with the Panigale's wiring harness. Heat-resistant rubber end caps seal the vacated hose ports cleanly and reliably, preventing contamination and maintaining correct engine bay pressures. JetPrime's component selection reflects the same engineering discipline that makes their products a staple in race paddocks across Europe.\u003c\/p\u003e\u003ch2\u003ePerformance \u0026amp; Race Preparation\u003c\/h2\u003e\u003cp\u003eThe EVAP canister and its associated plumbing are calibrated for road-legal emissions compliance, not outright performance. Removing this system through the JP ES 002 kit tidies the airbox area, eliminates a potential source of fuel vapour-related fuelling inconsistency, and removes a component that sees no benefit on a closed circuit. Combined with the fault-code suppression built into the eliminator module, the result is a cleaner, more focused machine ready for track day or race weekend use.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis kit fits the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale 1299 (2015–2018)\u003c\/li\u003e\n\u003cli\u003eDucati Panigale 1299 S (2015–2018)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eImportant Notice\u003c\/h2\u003e\u003cp\u003eThe JetPrime JP ES 002 Canister Eliminator System is intended exclusively for motorsport and closed-circuit track use. It is not approved for use on public roads and must not be fitted to any vehicle operated on public highways.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: JetPrime\u003c\/li\u003e\n\u003cli\u003ePart number: JP ES 002\u003c\/li\u003e\n\u003cli\u003eType: EVAP canister eliminator system\u003c\/li\u003e\n\u003cli\u003eFitment: Ducati Panigale 1299 \/ 1299 S, 2015–2018\u003c\/li\u003e\n\u003cli\u003eConnector type: OEM-compatible plug-and-play\u003c\/li\u003e\n\u003cli\u003eCap material: heat-resistant rubber\u003c\/li\u003e\n\u003cli\u003eInstallation: no wiring cuts required\u003c\/li\u003e\n\u003cli\u003eIntended use: closed-circuit \/ motorsport only\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168763339018,"sku":"JP ES 002","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ES_002_bd59117a-1b06-443a-95ca-24d398e3a317.png?v=1780814041"},{"product_id":"jetprime-sls-solenoid-eliminator-ducati-panigale-1299-s","title":"JetPrime SLS Solenoid Eliminator for Ducati Panigale 1299\/S (2015-2018) – JP ES 007","description":"\u003cp\u003eEngineered to OEM connector standards and built from premium-grade components, the JetPrime SLS Solenoid Eliminator JP ES 007 is a precision-made solution for the Ducati Panigale 1299\/S. It bypasses the solenoid valve in the SLS PAIR circuit and suppresses the resulting dashboard fault codes — cleanly, reliably, and without cutting a single wire.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBypasses the SLS PAIR circuit solenoid valve, eliminating the secondary air system from the drivetrain loop\u003c\/li\u003e\n\u003cli\u003eSuppresses dashboard fault codes triggered by the removal or deactivation of the SLS system\u003c\/li\u003e\n\u003cli\u003eGenuine plug-and-play fitment using an OEM-matched connector — no wire cutting, no splicing required\u003c\/li\u003e\n\u003cli\u003ePremium-quality internal components selected for long-term reliability under race conditions\u003c\/li\u003e\n\u003cli\u003eDeveloped and dyno-tested specifically for the Ducati Panigale 1299 and 1299 S (2015–2018)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Premium Materials\u003c\/h2\u003e\u003cp\u003eWhere generic eliminators rely on off-the-shelf connectors and budget resistors, the JetPrime JP ES 007 is assembled to a measurably higher standard. The OEM-spec connector interfaces directly with the factory wiring loom, ensuring a secure, vibration-resistant connection that requires no adaptation. Internal components are selected for thermal stability and long service life, making this eliminator equally suited to demanding track sessions and extended road use — within the limits noted below.\u003c\/p\u003e\u003cp\u003eJetPrime designed this unit specifically for the Panigale 1299 platform, meaning every tolerance, connector pin-out and resistance value is calibrated to this motorcycle's ECU. That specificity is what separates a proper eliminator from a universal workaround that may introduce new faults over time.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eFitting the JP ES 007 takes minutes. Locate the SLS solenoid connector in the airbox area, disconnect the factory solenoid, and plug in the eliminator. The OEM connector seats positively with an audible click. No additional tools, heat-shrink, or programming are required. Clear the stored fault codes with a diagnostic tool after installation and the dashboard will remain clean thereafter.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale 1299 (2015, 2016, 2017, 2018)\u003c\/li\u003e\n\u003cli\u003eDucati Panigale 1299 S (2015, 2016, 2017, 2018)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eJetPrime\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eJP ES 007\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eSLS solenoid eliminator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector type\u003c\/td\u003e\n\u003ctd\u003eOEM-matched direct-fit connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation method\u003c\/td\u003e\n\u003ctd\u003ePlug-and-play, no wire cutting required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eDucati Panigale 1299 \/ 1299 S (2015–2018)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntended use\u003c\/td\u003e\n\u003ctd\u003eRace use only — not road-legal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eImportant Notice\u003c\/h2\u003e\u003cp\u003eThis product is intended exclusively for racing and closed-circuit track use. It is not approved for use on public roads. Ensure compliance with the regulations of your racing series or circuit before fitting.\u003c\/p\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168763535626,"sku":"JP ES 007","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ES_007_ad69928e-adc8-43fd-967a-6a0e9b00ab37.png?v=1780814048"},{"product_id":"jetprime-eliminator-sls-solenoid-valve-bypass","title":"JetPrime Eliminator SLS Solenoid Valve Bypass – Ducati Panigale V2 955 (2020-2024) JP ES 007","description":"\u003cp\u003eUnlock the full potential of your Ducati Panigale V2 955 on track by eliminating the secondary air system entirely. The JetPrime Eliminator JP ES 007 bypasses the SLS-PAIR solenoid valve and simultaneously suppresses the resulting dashboard fault codes — giving you a clean instrument display and an engine free from the restrictive secondary air circuit.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBypasses the SLS-PAIR solenoid valve on the Ducati Panigale V2 955, removing a source of performance-robbing secondary air injection\u003c\/li\u003e\n\u003cli\u003eDeactivates dashboard fault codes triggered by disabling the SLS system, keeping your instrument cluster error-free during competition\u003c\/li\u003e\n\u003cli\u003eTrue plug-and-play installation using an OEM-matched connector — no wire cutting, no soldering, no irreversible modifications\u003c\/li\u003e\n\u003cli\u003eDeveloped and tested specifically for the Ducati Panigale V2 955 (2020-2024), ensuring a precise fit and reliable function\u003c\/li\u003e\n\u003cli\u003ePremium-grade components selected for long service life under the demanding thermal and vibration conditions of circuit riding\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesigned for the Track\u003c\/h2\u003e\u003cp\u003eRace teams and trackday regulars removing the standard exhaust system frequently encounter persistent fault codes as the ECU detects the missing secondary air solenoid signal. The JetPrime JP ES 007 closes that loop cleanly: it mimics the correct electrical load, so the dashboard stays clear and the ECU behaves as intended. The result is a focused, distraction-free riding experience from the moment you leave the pit lane. Installation takes minutes and requires no specialist tools — simply disconnect the original solenoid, plug in the JetPrime unit, and the system is complete.\u003c\/p\u003e\u003ch2\u003eBuild Quality\u003c\/h2\u003e\u003cp\u003eJetPrime engineered the JP ES 007 to match the OEM connector geometry exactly, removing any risk of misfit or intermittent contact. The internal components are rated for continuous operation in the elevated temperatures found in close proximity to a Panigale's exhaust headers, and the assembly undergoes function testing before despatch. This is a long-term solution, not a temporary workaround.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis eliminator is developed exclusively for the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDucati Panigale V2 955 — model years 2020, 2021, 2022, 2023, 2024\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eIt is not compatible with other Ducati models or engine variants. Verify your model year before fitting.\u003c\/p\u003e\u003ch2\u003eImportant Notice\u003c\/h2\u003e\u003cp\u003eThe JetPrime JP ES 007 is intended exclusively for racing and closed-circuit competition use. It is not approved for road use and must not be fitted to any motorcycle operated on public roads.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: JetPrime\u003c\/li\u003e\n\u003cli\u003ePart number: JP ES 007\u003c\/li\u003e\n\u003cli\u003eType: SLS solenoid valve eliminator \/ PAIR circuit bypass\u003c\/li\u003e\n\u003cli\u003eFitment: Ducati Panigale V2 955 (2020-2024)\u003c\/li\u003e\n\u003cli\u003eConnection: OEM plug-and-play connector\u003c\/li\u003e\n\u003cli\u003eInstallation: No wire cutting required\u003c\/li\u003e\n\u003cli\u003eIntended use: Racing \/ closed-circuit competition only\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168763699466,"sku":"JP ES 007","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ES_007_70ea97c5-4343-49cd-9dc3-b68e407a88c7.png?v=1780814057"},{"product_id":"jetprime-canister-eliminator-kit-ducati-panigale-v2-955","title":"JetPrime Canister Eliminator Kit for Ducati Panigale V2 955 (2020-2024) — JP ES 002","description":"\u003cp\u003eEngineered exclusively for the Ducati Panigale V2 955 from 2020 to 2024, the JetPrime JP ES 002 canister eliminator kit carries the hallmarks of a specialist electronics accessory built to a precise Italian-influenced standard. Where factory EVAP systems add weight, complexity and unwanted fault codes to a track-focused machine, this plug-and-play solution removes them cleanly — no wire cutting, no improvised blanking, no compromise.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSuppresses the fuel-injection fault codes associated with the factory purge valve, keeping the dashboard clear during track sessions\u003c\/li\u003e\n\u003cli\u003eAllows complete removal of the EVAP system (activated carbon canister), the electronic purge valve and all associated hoses\u003c\/li\u003e\n\u003cli\u003eServes as a direct replacement for a failed or leaking purge valve, eliminating the root cause rather than masking it\u003c\/li\u003e\n\u003cli\u003ePlug-and-play design uses an OEM-spec connector for a direct, no-cut installation\u003c\/li\u003e\n\u003cli\u003eHeat-resistant rubber caps seal the vacated hose ports for long-term durability in high-temperature engine bay conditions\u003c\/li\u003e\n\u003cli\u003eDeveloped and tested specifically for the Ducati Panigale V2 955 (2020-2024) — no generic fitment guesswork\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign, Finish and Heritage\u003c\/h2\u003e\u003cp\u003eJetPrime has built its reputation on electronics accessories that meet the exacting demands of serious track riders. The JP ES 002 reflects that heritage: every component in the kit is chosen for reliability under sustained heat and vibration, with an OEM-grade connector that mates directly to the factory harness and heat-resistant rubber blanking caps that retain a factory-quality appearance once the canister is removed. The result is a clean, purposeful engine bay that looks as considered as it functions.\u003c\/p\u003e\u003ch2\u003eInstallation and Use\u003c\/h2\u003e\u003cp\u003eBecause the kit retains the factory connector interface, installation requires no specialist wiring knowledge. The purge valve eliminator plugs directly into the existing loom, and the supplied rubber caps seal the vacated vacuum ports. The entire EVAP assembly — canister, purge valve and hoses — can then be removed without triggering persistent fault codes on the Ducati's fuel-injection system.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis kit is designed and validated exclusively for the following motorcycle:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDucati Panigale V2 955 — model years 2020, 2021, 2022, 2023 and 2024\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eImportant Notice\u003c\/h2\u003e\u003cp\u003eThis kit is intended for closed-circuit motorsport use only. It is not approved for use on public roads and must not be fitted to any motorcycle operated on public highways.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: JetPrime\u003c\/li\u003e\n\u003cli\u003ePart number: JP ES 002\u003c\/li\u003e\n\u003cli\u003eType: EVAP canister eliminator \/ purge valve eliminator kit\u003c\/li\u003e\n\u003cli\u003eFitment: Ducati Panigale V2 955 (2020-2024)\u003c\/li\u003e\n\u003cli\u003eConnector type: OEM-spec direct plug-in, no wire cutting required\u003c\/li\u003e\n\u003cli\u003eCap material: heat-resistant rubber\u003c\/li\u003e\n\u003cli\u003eIntended use: closed-circuit motorsport only — not road legal\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168763797770,"sku":"JP ES 002","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ES_002_3cdf468b-ff1c-4605-b1da-bd1da0387d94.png?v=1780814059"},{"product_id":"jetprime-tail-light-eliminator-ducati-panigale-v2-955","title":"JetPrime Tail Light Eliminator for Ducati Panigale V2 955 (2020-2024) – JP ES 012","description":"\u003cp\u003eSwap or remove the tail light on your Ducati Panigale V2 955 without a single dashboard fault code spoiling the result. The JetPrime JP ES 012 tail light eliminator is engineered specifically for the 2020-2024 Panigale V2 955, suppressing the instrument cluster error that appears the moment the OEM tail light circuit is broken. Installation takes minutes, no wire cutting required, and the bike reads as clean as it did from the factory.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEliminates dashboard fault codes triggered by tail light removal or replacement on the Panigale V2 955\u003c\/li\u003e\n\u003cli\u003ePlug-and-play design with an OEM-matched connector — fits directly into the existing loom without cutting or splicing\u003c\/li\u003e\n\u003cli\u003eDeveloped and tested specifically for the Ducati Panigale V2 955 (2020-2024) for guaranteed compatibility\u003c\/li\u003e\n\u003cli\u003eHigh-quality components chosen for long service life and consistent electrical performance\u003c\/li\u003e\n\u003cli\u003eClean, professional finish with no residual warnings on the TFT or instrument display\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThe JP ES 012 connects directly between the harness and the tail light position using the factory OEM plug. There is no need to cut, splice, or modify any wiring — the eliminator simply takes the place of the tail light load, fooling the ECU into registering a healthy circuit. The entire job can be completed trackside without specialist tools, making it the obvious choice for race-weekend preparation.\u003c\/p\u003e\u003ch2\u003eTrack Use Notice\u003c\/h2\u003e\u003cp\u003eThe JetPrime JP ES 012 is intended exclusively for competition and track use. It is not approved for road use and must not be fitted to any motorcycle operated on public roads.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis tail light eliminator fits the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDucati Panigale V2 955 — model years 2020, 2021, 2022, 2023, 2024\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eJetPrime\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eJP ES 012\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eTail light fault code eliminator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnection type\u003c\/td\u003e\n\u003ctd\u003eOEM plug-and-play connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eNo wire cutting required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eDucati Panigale V2 955 (2020-2024)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntended use\u003c\/td\u003e\n\u003ctd\u003eTrack \/ competition use only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168763961610,"sku":"JP ES 012","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ES_012.png?v=1780814068"},{"product_id":"jetprime-eliminator-sls-solenoid-bypass-kit-ducati-panigale","title":"JetPrime Eliminator SLS Solenoid Bypass Kit – Ducati Panigale V4\/S\/R (2018-2024) JP ES 007","description":"\u003cp\u003eWhen you strip a Ducati Panigale V4, V4 S, or V4 R down for track duty, the secondary air system is one of the first things to go — and the JetPrime Eliminator SLS JP ES 007 is the clean, engineered solution purpose-built for exactly that job. It bypasses the SLS-PAIR circuit solenoid valve and simultaneously suppresses the resulting dashboard fault codes, so your dash stays clear and your focus stays on the lap.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBypasses the SLS-PAIR circuit solenoid valve completely, eliminating secondary air system interference at the track\u003c\/li\u003e\n\u003cli\u003eSuppresses dashboard fault codes triggered by SLS system removal — no warning lights, no distractions\u003c\/li\u003e\n\u003cli\u003eTrue plug-and-play fitment using an OEM-spec connector: no wire cutting, no splicing, no permanent modification\u003c\/li\u003e\n\u003cli\u003eDeveloped and tested specifically for the Ducati Panigale V4, V4 S, and V4 R (2018–2024)\u003c\/li\u003e\n\u003cli\u003ePremium-grade components selected for long-term reliability under race conditions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eRace-Ready Engineering\u003c\/h2\u003e\u003cp\u003eThe SLS (Secondary Air System) on the Panigale V4 platform exists for road-going emissions compliance. On circuit, it adds unwanted complexity and, once the system is removed or blocked as part of a full race build, the ECU flags a fault that clutters your dashboard. The JetPrime JP ES 007 resolves both issues in one small, well-made unit.\u003c\/p\u003e\u003cp\u003eThe eliminator ships with a factory-style OEM connector that plugs straight into the original harness position. There is no need to cut, splice, or tape any wiring — the installation is fully reversible, which matters when a bike needs to pass technical inspection or return to road configuration. Quality components throughout ensure the unit handles the vibration and heat cycles of sustained track use without degradation.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThe JetPrime Eliminator SLS JP ES 007 fits the following motorcycles:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale V4 (2018–2024)\u003c\/li\u003e\n\u003cli\u003eDucati Panigale V4 S (2018–2024)\u003c\/li\u003e\n\u003cli\u003eDucati Panigale V4 R (2018–2024)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eImportant Notice\u003c\/h2\u003e\u003cp\u003eThis product is intended exclusively for racing and closed-circuit competition use. It is not approved for use on public roads.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: JetPrime\u003c\/li\u003e\n\u003cli\u003ePart Number: JP ES 007\u003c\/li\u003e\n\u003cli\u003eFunction: SLS-PAIR circuit solenoid valve eliminator with dashboard fault code suppression\u003c\/li\u003e\n\u003cli\u003eConnector Type: OEM-spec plug-and-play connector\u003c\/li\u003e\n\u003cli\u003eInstallation: No wire cutting required; fully reversible\u003c\/li\u003e\n\u003cli\u003eFitment: Ducati Panigale V4 \/ V4 S \/ V4 R (2018–2024)\u003c\/li\u003e\n\u003cli\u003eIntended Use: Racing and closed-circuit competition only\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168764223754,"sku":"JP ES 007","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ES_007_1845fe1a-1fb7-42bc-b1f6-79341b073ffd.png?v=1780814081"},{"product_id":"jetprime-evap-canister-eliminator-kit-ducati-panigale-v4-s-r","title":"JetPrime EVAP Canister Eliminator Kit for Ducati Panigale V4\/S\/R (2018-2024) – JP ES 002","description":"\u003cp\u003eDesigned and validated exclusively for the Ducati Panigale V4, V4 S and V4 R from 2018 to 2024, the JetPrime JP ES 002 canister eliminator kit gives race-prepared riders a clean, code-free solution for removing the EVAP system in its entirety. Every component is engineered to OEM connector standards, so the installation is plug-and-play with no wire cutting required — and no fault codes left behind to interrupt your session.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEliminates Fi fault codes associated with the electronic purge valve, keeping the ECU clean and session-ready\u003c\/li\u003e\n\u003cli\u003eReplaces a failed or redundant purge valve with a purpose-built electronic eliminator using a direct OEM connector\u003c\/li\u003e\n\u003cli\u003eAllows full removal of the EVAP system (active carbon canister) and all associated hoses, reducing unnecessary mass and complexity\u003c\/li\u003e\n\u003cli\u003ePlug-and-play fitment — no wire cutting, no splicing, no permanent modifications to the wiring loom\u003c\/li\u003e\n\u003cli\u003eHeat-resistant rubber caps included for long-term durability under high engine-bay temperatures\u003c\/li\u003e\n\u003cli\u003eDeveloped and track-tested specifically for the Ducati Panigale V4\/S\/R platform across the full 2018–2024 production run\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSafety, Compliance and Intended Use\u003c\/h2\u003e\u003cp\u003eThis kit is approved for race and closed-circuit use only. It is not road-legal and must not be fitted to any motorcycle used on public roads. Before installation, riders should confirm the applicable regulations with their series technical officials. The OEM-spec connector and heat-resistant capping ensure the kit meets the demands of demanding track environments while keeping the installation reversible and safe for technical scrutiny.\u003c\/p\u003e\u003ch2\u003eBuild Quality\u003c\/h2\u003e\u003cp\u003eJetPrime has engineered the JP ES 002 to the same exacting standards that define their electronics catalogue. The electronic purge-valve eliminator ships with a genuine OEM-pattern connector for a secure, waterproof join directly to the Panigale's harness. Heat-resistant rubber caps seal the open hose ports against hot air and vibration, preventing ingress and maintaining long service life even on endurance machinery. The result is a compact, lightweight assembly that cleans up the under-tank area without compromise.\u003c\/p\u003e\u003ch2\u003ePerformance Benefit\u003c\/h2\u003e\u003cp\u003eRemoving the EVAP canister, purge valve and associated hoses from a Ducati Panigale V4 does more than tidy the engine bay. It eliminates a potential source of evaporative fuel vapour re-ingestion, removes the ECU's continuous self-check on the purge circuit, and strips weight and plumbing from a part of the machine where clean airflow and accessibility matter. On track, where every component needs to justify its presence, the JP ES 002 is a logical and proven first step in race preparation.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis kit fits the following motorcycles:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale V4 (2018–2024)\u003c\/li\u003e\n\u003cli\u003eDucati Panigale V4 S (2018–2024)\u003c\/li\u003e\n\u003cli\u003eDucati Panigale V4 R (2018–2024)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: JetPrime\u003c\/li\u003e\n\u003cli\u003ePart number: JP ES 002\u003c\/li\u003e\n\u003cli\u003eType: EVAP canister eliminator kit\u003c\/li\u003e\n\u003cli\u003eConnector type: OEM-pattern direct-fit connector\u003c\/li\u003e\n\u003cli\u003eInstallation: plug-and-play, no wire cutting required\u003c\/li\u003e\n\u003cli\u003eFitment: Ducati Panigale V4 \/ V4 S \/ V4 R, 2018–2024\u003c\/li\u003e\n\u003cli\u003eIntended use: race and closed-circuit use only — not road-legal\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168764420362,"sku":"JP ES 002","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ES_002_02178431-71e5-4eb2-8bfa-f456d42ee9a4.png?v=1780814085"},{"product_id":"jetprime-tail-light-eliminator-ducati-panigale-v4-v4-s-v4-r","title":"JetPrime Tail Light Eliminator for Ducati Panigale V4 \/ V4 S \/ V4 R (2018-2024) – JP ES 012","description":"\u003cp\u003eRemove the tail light from your Ducati Panigale V4, V4 S or V4 R and the dashboard will flag an error the moment you fire the engine — unless you fit the JetPrime JP ES 012 eliminator first. Designed specifically for the 2018-2024 Panigale V4 family, this compact plug-and-play module suppresses the fault signal at source, so your dash reads clean from the first lap and you can focus entirely on your riding.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEliminates dashboard error codes triggered by tail light removal or replacement on the Ducati Panigale V4, V4 S and V4 R\u003c\/li\u003e\n\u003cli\u003ePlug-and-play fitment using the OEM connector — no wire cutting, no splicing, no additional modifications required\u003c\/li\u003e\n\u003cli\u003eStraightforward installation that takes minutes, not hours, keeping workshop time to a minimum\u003c\/li\u003e\n\u003cli\u003eEvery component rigorously tested for long-term durability and consistent electrical performance\u003c\/li\u003e\n\u003cli\u003eDeveloped and validated exclusively for the Ducati Panigale V4 \/ V4 S \/ V4 R (2018-2024) — not a generic universal unit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePurpose-Built for Track Use\u003c\/h2\u003e\u003cp\u003eThe JetPrime JP ES 012 was conceived from the outset as a racing component. When a tail tidy or full race bodywork kit replaces the OEM tail section, the Panigale V4's ECU detects the missing tail light load and raises a fault. Left unaddressed, that fault can obscure other warnings and distract from track preparation. The JP ES 012 presents the correct electrical load to the ECU, keeping the instrument cluster clear and the rider's attention where it belongs — on the circuit.\u003c\/p\u003e\u003ch3\u003eOEM-Grade Connection\u003c\/h3\u003e\u003cp\u003eJetPrime supplies the JP ES 012 with an OEM-specification connector that mates directly with the bike's factory harness. There is no need to cut or permanently modify any wiring, making the fitment fully reversible should the bike ever return to road specification.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThe JetPrime JP ES 012 tail light eliminator fits the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale V4 — 2018 to 2024\u003c\/li\u003e\n\u003cli\u003eDucati Panigale V4 S — 2018 to 2024\u003c\/li\u003e\n\u003cli\u003eDucati Panigale V4 R — 2018 to 2024\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note: this product is intended exclusively for motorsport and closed-circuit use. It is not approved for use on public roads.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: JetPrime\u003c\/li\u003e\n\u003cli\u003ePart number: JP ES 012\u003c\/li\u003e\n\u003cli\u003eType: Tail light eliminator \/ dashboard error suppressor\u003c\/li\u003e\n\u003cli\u003eFitment: Ducati Panigale V4 \/ V4 S \/ V4 R (2018-2024)\u003c\/li\u003e\n\u003cli\u003eConnection: OEM plug-and-play connector\u003c\/li\u003e\n\u003cli\u003eInstallation: No wire cutting required\u003c\/li\u003e\n\u003cli\u003eIntended use: Motorsport \/ closed-circuit only — not road legal\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168764453130,"sku":"JP ES 012","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ES_012_7abadbf5-4ff8-4c4c-9549-a790dd9c2bb1.png?v=1780814085"},{"product_id":"jetprime-side-stand-eliminator-ducati-panigale-v4-s-r-jp-es","title":"JetPrime Side Stand Eliminator for Ducati Panigale V4\/S\/R (2018-2024) – JP ES 011","description":"\u003cp\u003eWhen you remove the side stand for track use, the Ducati Panigale V4\/S\/R throws a dashboard fault code that can disrupt your session. The JetPrime Side Stand Eliminator JP ES 011 resolves this cleanly and permanently — suppressing the error signal at source without touching a single wire on your bike's loom.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBypasses the side stand switch signal to prevent ECU fault codes from triggering on the dashboard\u003c\/li\u003e\n\u003cli\u003ePlug-and-play design using an OEM-matched connector — no wire cutting, no splicing, no irreversible modifications\u003c\/li\u003e\n\u003cli\u003eDeveloped and validated specifically for the Ducati Panigale V4, V4 S, and V4 R across model years 2018 to 2024\u003c\/li\u003e\n\u003cli\u003eHigh-quality components selected for durability and reliable signal reproduction under race conditions\u003c\/li\u003e\n\u003cli\u003eClean, discrete installation that leaves the original wiring harness completely intact\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesigned for the Track\u003c\/h2\u003e\u003cp\u003eRiders preparing a Panigale V4 for circuit use routinely remove the side stand to reduce unsprung weight and eliminate any risk of accidental contact with the tarmac mid-corner. The factory side stand switch then sends a continuous fault to the dashboard — an irritation at best, a distraction at worst. The JP ES 011 plugs directly into the OEM socket vacated by the switch, feeding the ECU the correct resting signal and silencing the warning permanently.\u003c\/p\u003e\u003cp\u003eBecause the eliminator uses a genuine OEM-type connector, fitment is a matter of seconds rather than minutes. There is no need for soldering, heat-shrink tubing, or electrical tape. When you want to return the bike to road specification, the process reverses just as simply.\u003c\/p\u003e\u003ch2\u003eQuality and Safety\u003c\/h2\u003e\u003cp\u003eJetPrime manufactures the JP ES 011 to the same exacting standards applied across their competition electronics range. Every unit is tested for the Ducati Panigale V4 platform to ensure consistent signal output and connector integrity over the lifetime of your track programme. This is not a generic bypass resistor — it is a part engineered for a specific motorcycle and a specific application.\u003c\/p\u003e\u003cp\u003eImportant: The JP ES 011 is designed exclusively for racing and track-day use. It is not approved for use on public roads. Fitting this eliminator to a road-registered motorcycle may render the vehicle non-compliant with road traffic regulations. Always consult the relevant sporting regulations before fitting to a competition machine.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThe JetPrime JP ES 011 side stand eliminator is compatible with the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale V4 — 2018 to 2024\u003c\/li\u003e\n\u003cli\u003eDucati Panigale V4 S — 2018 to 2024\u003c\/li\u003e\n\u003cli\u003eDucati Panigale V4 R — 2018 to 2024\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: JetPrime\u003c\/li\u003e\n\u003cli\u003ePart number: JP ES 011\u003c\/li\u003e\n\u003cli\u003eFunction: Side stand switch eliminator \/ dashboard fault code suppressor\u003c\/li\u003e\n\u003cli\u003eConnector type: OEM-matching plug-and-play connector\u003c\/li\u003e\n\u003cli\u003eInstallation: No wire cutting required\u003c\/li\u003e\n\u003cli\u003eIntended use: Track \/ racing only — not road legal\u003c\/li\u003e\n\u003cli\u003eFitment: Ducati Panigale V4, V4 S, V4 R (2018–2024)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168764518666,"sku":"JP ES 011","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ES_011_b15b32fb-add6-412b-a906-833e83946449.png?v=1780814092"},{"product_id":"jetprime-side-stand-eliminator-kawasaki-zx-6r-636-rr","title":"JetPrime Side Stand Eliminator for Kawasaki ZX-6R \/ 636 \/ RR (2003-2026) – JP ES 013","description":"\u003cp\u003eTired of dashboard error codes interrupting your track sessions? The JetPrime JP ES 013 side stand eliminator lets you bypass the side stand switch on your Kawasaki ZX-6R, 636, or RR in minutes, suppressing fault codes at the source without cutting a single wire. Designed specifically for the ZX-6R platform across every model year from 2003 to 2026, it is the straightforward, affordable fix that keeps your dash clean and your focus on the riding.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBypasses the side stand switch signal completely, preventing nuisance cut-outs on track\u003c\/li\u003e\n\u003cli\u003eSuppresses the associated dashboard error code so the instrument cluster reads normally\u003c\/li\u003e\n\u003cli\u003ePlug-and-play fitment using an OEM-matched connector — no wire cutting, no splicing required\u003c\/li\u003e\n\u003cli\u003eDeveloped and tested exclusively for the Kawasaki ZX-6R \/ 636 \/ RR (2003-2026) for a guaranteed correct fit\u003c\/li\u003e\n\u003cli\u003ePremium-grade components ensure long-term reliability even in demanding track conditions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEveryday Usability and Installation\u003c\/h2\u003e\u003cp\u003eThe JP ES 013 is built around the idea that reliability should not require a wiring degree. The included OEM-spec connector plugs directly into the factory harness at the side stand switch location. The whole job takes a matter of minutes: unplug the original switch, plug in the JetPrime eliminator, and the fault code disappears. There is no permanent modification to your loom, so the bike can be returned to standard specification just as quickly if required.\u003c\/p\u003e\u003ch2\u003eBuild Quality\u003c\/h2\u003e\u003cp\u003eJetPrime has engineered this eliminator to the same standard as the rest of their electronics range. High-quality internal components maintain stable signal suppression lap after lap, and the sealed OEM-style housing resists the heat, vibration, and moisture typical of race environments. The result is a component that delivers consistent, trouble-free performance without adding complexity to your setup.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis eliminator is designed and tested for the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKawasaki ZX-6R — 2003 to 2026\u003c\/li\u003e\n\u003cli\u003eKawasaki ZX-6R 636 — 2003 to 2026\u003c\/li\u003e\n\u003cli\u003eKawasaki ZX-6RR — 2003 to 2026\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note: this product is intended for race and track use only and is not approved for use on public roads.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: JetPrime\u003c\/li\u003e\n\u003cli\u003ePart number: JP ES 013\u003c\/li\u003e\n\u003cli\u003eType: Side stand switch eliminator\u003c\/li\u003e\n\u003cli\u003eFitment: Kawasaki ZX-6R \/ 636 \/ RR (2003-2026)\u003c\/li\u003e\n\u003cli\u003eConnection: OEM-matched plug-and-play connector\u003c\/li\u003e\n\u003cli\u003eInstallation: No wire cutting required\u003c\/li\u003e\n\u003cli\u003eIntended use: Race and track only\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168764813578,"sku":"JP ES 013","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JPES013.png?v=1780814107"},{"product_id":"jetprime-sls-pair-circuit-solenoid-eliminator-kawasaki-zx-6r-636-rr","title":"JetPrime SLS PAIR Circuit Solenoid Eliminator for Kawasaki ZX-6R \/ 636 \/ RR (2007–2022) – JP ES 007","description":"\u003cp\u003eThe JetPrime JP ES 007 solenoid eliminator carries the precise engineering and purposeful design that have made JetPrime a trusted name in competition electronics. Purpose-built for the Kawasaki ZX-6R, 636 and RR across the full 2007–2022 model range, this plug-and-play unit bypasses the SLS PAIR circuit solenoid valve and simultaneously suppresses the dashboard fault code that would otherwise follow — a clean, considered solution with a fitment-first heritage behind it.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBypasses the SLS PAIR circuit solenoid valve on Kawasaki ZX-6R \/ 636 \/ RR (2007–2022), eliminating the secondary air system from the circuit\u003c\/li\u003e\n\u003cli\u003eSuppresses the resulting dashboard fault\/error indicator — no warning lights left active after installation\u003c\/li\u003e\n\u003cli\u003eTrue plug-and-play connection using an OEM-spec connector; no wire cutting, no splicing, no modification to the original loom\u003c\/li\u003e\n\u003cli\u003eDeveloped and tested specifically for the Kawasaki ZX-6R \/ 636 \/ RR model family across the complete 2007–2022 production run\u003c\/li\u003e\n\u003cli\u003ePremium-grade components selected for long-term reliability under sustained competition conditions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign, Finish and Heritage\u003c\/h2\u003e\u003cp\u003eJetPrime built its reputation supplying electronics to race teams who cannot afford downtime or unreliability. The JP ES 007 reflects that philosophy: every connector, housing and internal component is chosen to withstand the heat cycles, vibration and ambient conditions of track use. The OEM-specification connector ensures the eliminator integrates seamlessly with the factory harness, maintaining the neat, factory-quality appearance that sets professional builds apart from improvised solutions.\u003c\/p\u003e\u003cp\u003eUnlike generic bypass resistors or homemade plugs, the JP ES 007 is a finished product — designed with the same attention to detail and traceability that defines JetPrime's wider catalogue of race-grade accessories.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eInstallation requires no special tools and no permanent alteration to the motorcycle's wiring. Locate the SLS solenoid connector on the Kawasaki ZX-6R \/ 636 \/ RR, unplug the factory solenoid, and connect the JP ES 007 in its place. The OEM-matched plug seats positively first time. The dashboard fault code is cleared, and the bike is ready to run.\u003c\/p\u003e\u003ch2\u003eRace Use Notice\u003c\/h2\u003e\u003cp\u003eThe JetPrime JP ES 007 is designed exclusively for closed-circuit competition use. It is not approved for road use and must not be fitted to any motorcycle operated on public roads.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eKawasaki ZX-6R (2007–2022)\u003c\/li\u003e\n\u003cli\u003eKawasaki ZX-636 (2007–2022)\u003c\/li\u003e\n\u003cli\u003eKawasaki ZX-6RR (2007–2022)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eJetPrime\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eJP ES 007\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eSLS PAIR circuit solenoid eliminator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnection type\u003c\/td\u003e\n\u003ctd\u003eOEM-spec plug-and-play connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eNo wire cutting required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eKawasaki ZX-6R \/ 636 \/ RR (2007–2022)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntended use\u003c\/td\u003e\n\u003ctd\u003eClosed-circuit competition only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168764911882,"sku":"JP ES 007","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ES_007_dacfdcc3-e657-4779-9a13-b4ea2bcf1cee.png?v=1780814108"},{"product_id":"jetprime-sls-solenoid-eliminator-kawasaki-zx-10-r-rr","title":"JetPrime SLS Solenoid Eliminator for Kawasaki ZX-10 R\/RR (2004-2026) – JP ES 007","description":"\u003cp\u003eThe JetPrime JP ES 007 SLS Solenoid Eliminator is engineered specifically for the Kawasaki ZX-10 R and ZX-10 RR across its entire 2004-2026 production run. Built to the exacting standards that define JetPrime's electronics range, this kit bypasses the PAIR-circuit solenoid valve of the secondary air system and simultaneously eliminates the dashboard fault codes that would otherwise accompany its removal — leaving your instrument cluster clean and your engine breathing freely.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBypasses the SLS PAIR-circuit solenoid valve without cutting or modifying the factory wiring harness\u003c\/li\u003e\n\u003cli\u003eSuppresses dashboard error codes triggered by the removal or deactivation of the secondary air system\u003c\/li\u003e\n\u003cli\u003ePlug-and-play fitment using a precision OEM-specification connector for a direct, secure connection\u003c\/li\u003e\n\u003cli\u003eConstructed from high-quality components selected for long-term durability and consistent reliability under race conditions\u003c\/li\u003e\n\u003cli\u003eDeveloped and validated exclusively for the Kawasaki ZX-10 R and ZX-10 RR (2004-2026)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Premium Materials\u003c\/h2\u003e\u003cp\u003eWhere generic eliminators rely on loose connectors and afterthought wiring, the JP ES 007 is built around an OEM-grade connector that mates directly with the factory loom. Every component in the circuit is selected for thermal stability and vibration resistance — qualities that matter when a ZX-10 R is being pushed hard on a race circuit. The result is a unit that installs cleanly, sits securely, and requires no further attention once fitted.\u003c\/p\u003e\u003ch2\u003eHow It Works\u003c\/h2\u003e\u003cp\u003eThe secondary air system — referred to by Kawasaki as the SLS (Secondary Lean System) — introduces fresh air into the exhaust ports to reduce unburned hydrocarbons. When this system is removed or blocked as part of a race or track-day preparation, the ECU detects an open circuit at the solenoid and triggers a fault code. The JP ES 007 presents the correct electrical load to the ECU in place of the solenoid, convincing the system that the circuit is intact and preventing any warning lights or fault entries from appearing on the dashboard.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis eliminator is designed and tested for the following motorcycles:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKawasaki ZX-10 R (2004-2026)\u003c\/li\u003e\n\u003cli\u003eKawasaki ZX-10 RR (2004-2026)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSafety Notice\u003c\/h2\u003e\u003cp\u003eThis product is intended exclusively for race and closed-circuit competition use. It is not approved for road use or for use on public highways.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: JetPrime\u003c\/li\u003e\n\u003cli\u003ePart number: JP ES 007\u003c\/li\u003e\n\u003cli\u003eFunction: SLS PAIR-circuit solenoid eliminator with fault code suppression\u003c\/li\u003e\n\u003cli\u003eConnector type: OEM-specification direct-fit connector\u003c\/li\u003e\n\u003cli\u003eInstallation: Plug-and-play, no wiring cuts required\u003c\/li\u003e\n\u003cli\u003eFitment: Kawasaki ZX-10 R \/ ZX-10 RR, 2004-2026\u003c\/li\u003e\n\u003cli\u003eIntended use: Race and closed-circuit competition only\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168765174026,"sku":"JP ES 007","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ES_007_bc7e7a18-7c1c-4404-9f26-edf14c394171.png?v=1780814116"},{"product_id":"jetprime-side-stand-eliminator-kawasaki-zx-10-r-rr","title":"JetPrime Side Stand Eliminator for Kawasaki ZX-10 R\/RR (2004-2026) – JP ES 013","description":"\u003cp\u003eRidden hard all day on circuit, the last thing you need is a spurious dashboard fault code pulling your focus from the next braking point. The JetPrime Side Stand Eliminator JP ES 013 is purpose-built for the Kawasaki ZX-10 R\/RR across its full 2004–2026 production run, cleanly bypassing the side stand switch and silencing any related dashboard errors so you can concentrate entirely on performance.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBypasses the side stand switch circuit completely, eliminating the root cause of related fault codes\u003c\/li\u003e\n\u003cli\u003eSuppresses dashboard error warnings triggered by side stand switch removal or track preparation\u003c\/li\u003e\n\u003cli\u003eGenuine plug-and-play installation using an OEM-matched connector — no wire cutting, no splicing required\u003c\/li\u003e\n\u003cli\u003eHigh-quality components engineered for long-term reliability under race conditions\u003c\/li\u003e\n\u003cli\u003eDeveloped and tested specifically for the Kawasaki ZX-10 R and ZX-10 RR (2004–2026)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eClean Installation, Zero Compromise\u003c\/h2\u003e\u003cp\u003eThe JP ES 013 ships with a connector that matches the factory wiring harness exactly. Fitting takes minutes: simply unplug the original switch, connect the eliminator in its place, and the job is done. There is no need to cut, splice or modify the original loom, which keeps your bike's wiring fully reversible and tidy. Whether you are preparing a dedicated track bike or simply removing a redundant component for a cleaner build, the installation demands nothing beyond basic mechanical familiarity.\u003c\/p\u003e\u003ch2\u003eBuilt for the Track\u003c\/h2\u003e\u003cp\u003eJetPrime designs this eliminator to the same quality standards applied across their race electronics range. The components are selected to withstand the vibration, heat and electrical demands of repeated track days and competition use. The result is a reliable, set-and-forget solution that removes a common source of dashboard confusion without any ongoing maintenance.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis eliminator is designed and validated exclusively for the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKawasaki ZX-10 R – all variants, 2004 to 2026\u003c\/li\u003e\n\u003cli\u003eKawasaki ZX-10 RR – all variants, 2004 to 2026\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note: this product is approved for race and track use only and is not road-legal. It must not be used on vehicles operated on public roads.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: JetPrime\u003c\/li\u003e\n\u003cli\u003ePart number: JP ES 013\u003c\/li\u003e\n\u003cli\u003eFunction: side stand switch eliminator with dashboard error suppression\u003c\/li\u003e\n\u003cli\u003eInstallation: plug-and-play, OEM-matched connector\u003c\/li\u003e\n\u003cli\u003eWire modification required: none\u003c\/li\u003e\n\u003cli\u003eIntended use: race and track use only — not road-legal\u003c\/li\u003e\n\u003cli\u003eFitment: Kawasaki ZX-10 R \/ ZX-10 RR, 2004–2026\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168765239562,"sku":"JP ES 013","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JPES013_7f79912d-a363-441b-8b47-49efa7891298.png?v=1780814123"},{"product_id":"jetprime-eliminator-sls-solenoid-bypass-kit-suzuki-gsx-r-1000-jp-es","title":"JetPrime Eliminator SLS Solenoid Bypass Kit Suzuki GSX-R 1000 (2017-2023) JP ES 007","description":"\u003cp\u003eChasing a cleaner dashboard and a tidier secondary air system delete on your GSX-R 1000? The JetPrime Eliminator JP ES 007 is the no-fuss solution — a purpose-built solenoid bypass unit that suppresses the SLS PAIR circuit fault codes at their source, so your dashboard stays clear and your bike runs as intended after an SLS removal. No wire cutting, no guesswork, no workshop hours wasted.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBypasses the SLS PAIR circuit solenoid valve, eliminating the root cause of fault codes triggered by secondary air system removal\u003c\/li\u003e\n\u003cli\u003eSuppresses dashboard error warnings automatically once installed — no additional coding or mapping required\u003c\/li\u003e\n\u003cli\u003ePlug-and-play fitment using an OEM-matched connector for a direct, secure connection\u003c\/li\u003e\n\u003cli\u003eNo wire cutting or splicing needed — the harness remains intact and fully reversible\u003c\/li\u003e\n\u003cli\u003eDesigned and validated specifically for the Suzuki GSX-R 1000 (2017-2023) — not a generic adapter\u003c\/li\u003e\n\u003cli\u003ePremium components selected for long-term durability under demanding track conditions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEveryday Usability and Straightforward Installation\u003c\/h2\u003e\u003cp\u003eWhat sets the JP ES 007 apart from improvised bypass solutions is its OEM-grade connector. Plug it directly into the existing harness in place of the SLS solenoid and the ECU is satisfied — no fault stored, no warning light nagging you on a track day morning. The whole job takes minutes rather than hours, and because no wires are cut, returning the bike to standard specification is equally straightforward if you ever need to.\u003c\/p\u003e\u003cp\u003eThe kit is built to last. JetPrime specifies quality components throughout, so once installed it simply does its job session after session without attention. For riders who remove the secondary air system as part of a broader track or performance preparation, this eliminator closes the loop cleanly and lets you focus on riding rather than fault-finding.\u003c\/p\u003e\u003ch2\u003eTrack Use and Performance Context\u003c\/h2\u003e\u003cp\u003eRemoving the SLS PAIR system is a common step when preparing a GSX-R 1000 for circuit use — it reduces heat around the exhaust headers and eliminates unnecessary pipework. Without an eliminator, the ECU immediately flags the missing solenoid and may influence fuelling behaviour. The JetPrime JP ES 007 resolves that in one step, making it a sensible and cost-effective part of any track-prep parts list.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis eliminator is designed exclusively for the following motorcycle:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eSuzuki GSX-R 1000 — model years 2017, 2018, 2019, 2020, 2021, 2022, 2023\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003ePlease verify your model year before ordering. This product is intended for race and track use only and is not approved for road use.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: JetPrime\u003c\/li\u003e\n\u003cli\u003ePart number: JP ES 007\u003c\/li\u003e\n\u003cli\u003eType: SLS PAIR circuit solenoid eliminator\u003c\/li\u003e\n\u003cli\u003eFitment: Suzuki GSX-R 1000 (2017-2023)\u003c\/li\u003e\n\u003cli\u003eConnection: OEM-matched plug-and-play connector\u003c\/li\u003e\n\u003cli\u003eInstallation: No wire cutting required\u003c\/li\u003e\n\u003cli\u003eIntended use: Race and track use only — not road legal\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168765731082,"sku":"JP ES 007","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ES_007_2c20ac5a-7721-4201-a141-ed4b3f6fea5e.png?v=1780814141"},{"product_id":"jetprime-abs-eliminator-yamaha-yzf-r3","title":"JetPrime ABS Eliminator for Yamaha YZF-R3 (2015-2023) – JP ABSY 004","description":"\u003cp\u003eStripping weight from a track-focused YZF-R3 without triggering dashboard warnings is exactly what the JetPrime ABS Eliminator JP ABSY 004 is built for. Engineered specifically for the Yamaha YZF-R3 from 2015 to 2023, this plug-and-play kit removes the entire ABS system cleanly and keeps your instrument display error-free throughout every session.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRemoves the ABS system completely from the motorcycle, saving approximately 1 kg of unsprung weight\u003c\/li\u003e\n\u003cli\u003eSuppresses ABS fault codes so no warning light appears on the dashboard during racing\u003c\/li\u003e\n\u003cli\u003eOEM-matching connector for a direct, no-cut installation — no wiring modifications required\u003c\/li\u003e\n\u003cli\u003ePlug-and-play fitment keeps installation straightforward and fully reversible\u003c\/li\u003e\n\u003cli\u003eDeveloped and tested exclusively for the Yamaha YZF-R3 (2015–2023) for guaranteed compatibility\u003c\/li\u003e\n\u003cli\u003eHigh-quality components ensure lasting reliability under demanding track conditions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEngineered for the Track\u003c\/h2\u003e\u003cp\u003eOn circuit, ABS adds weight and introduces intervention that experienced riders neither need nor want. The JetPrime JP ABSY 004 lets you remove that hardware cleanly, recovering roughly 1 kg that would otherwise stay bolted to the motorcycle. Because the kit uses an OEM-spec connector, the ECU reads the circuit as complete and the dashboard remains clear — no fault codes, no distracting warning lights between sessions or on the formation lap.\u003c\/p\u003e\u003ch2\u003eInstallation \u0026amp; Build Quality\u003c\/h2\u003e\u003cp\u003eThe eliminator arrives ready to fit. The OEM-style plug seats directly into the existing harness without cutting, splicing, or repinning any wires, which means the installation can be reversed if the bike ever returns to road use. JetPrime manufactures the unit to a high quality standard with components selected for durability under the vibration and temperature cycles typical of track use.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis kit is designed and tested for the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eYamaha YZF-R3 — model years 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eJetPrime\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eJP ABSY 004\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eABS Eliminator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment\u003c\/th\u003e\n\u003ctd\u003eYamaha YZF-R3 (2015–2023)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight Saving\u003c\/th\u003e\n\u003ctd\u003eApproximately 1 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConnection\u003c\/th\u003e\n\u003ctd\u003eOEM plug-and-play connector, no cutting required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntended Use\u003c\/th\u003e\n\u003ctd\u003eTrack \/ motorsport use only — not road legal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003eNote: This product is intended exclusively for motorsport and track use. It is not approved for use on public roads.\u003c\/p\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168765763850,"sku":"JP ABSY 004","price":170.82,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ABSY_001.png?v=1780814145"},{"product_id":"jetprime-side-stand-eliminator-yamaha-yzf-r3","title":"JetPrime Side Stand Eliminator for Yamaha YZF-R3 (2015-2023) – JP ES 013","description":"\u003cp\u003eThe JetPrime JP ES 013 side stand eliminator is purpose-engineered for the Yamaha YZF-R3, combining precision Italian craftsmanship with a plug-and-play design that has earned JetPrime a loyal following across club racing paddocks and track-day pits alike. Developed and tested specifically for the YZF-R3 from 2015 to 2023, it bypasses the side stand switch cleanly and silences the resulting dashboard fault codes — no wiring cuts, no guesswork.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBypasses the side stand switch entirely, preventing unintended cut-outs during track use\u003c\/li\u003e\n\u003cli\u003eEliminates dashboard error codes triggered by the side stand switch circuit\u003c\/li\u003e\n\u003cli\u003ePlug-and-play fitment via an OEM-matched connector — no cable cutting required\u003c\/li\u003e\n\u003cli\u003eDesigned and validated exclusively for the Yamaha YZF-R3 (2015-2023)\u003c\/li\u003e\n\u003cli\u003ePremium-grade components ensure lasting reliability under racing conditions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign, Finish and Heritage\u003c\/h2\u003e\u003cp\u003eJetPrime has built its reputation on producing electronics accessories that match the fit and finish of the original motorcycle harness. The JP ES 013 carries that philosophy through: the OEM-specification connector mates directly with the YZF-R3 loom with zero modification, and the compact unit tucks away neatly once installed. The attention to connector quality and material selection reflects the same standard JetPrime applies across its full range of Italian-designed motorcycle electronics, making this eliminator a natural choice for riders who demand both performance and longevity from every component they bolt on.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eInstallation is straightforward and requires no specialist tools. Locate the side stand switch connector on the YZF-R3 harness, unplug the factory switch, and connect the JP ES 013 in its place. The OEM connector ensures a secure, rattle-free fit. Once connected, the dashboard fault code associated with the side stand circuit is suppressed, and the motorcycle behaves as if the side stand is permanently stowed — ideal for race-prepared machines where the stand has been removed entirely.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis eliminator is confirmed to fit the following motorcycle:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eYamaha YZF-R3 — model years 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003ePlease note: this product is intended for race and track use only and is not approved for use on public roads.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eJetPrime\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eJP ES 013\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eSide stand switch eliminator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eYamaha YZF-R3 (2015-2023)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnection type\u003c\/td\u003e\n\u003ctd\u003eOEM plug-and-play connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eNo cable cutting required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntended use\u003c\/td\u003e\n\u003ctd\u003eRace and track use only — not road legal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168766025994,"sku":"JP ES 013","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JPES013_01385746-bfb5-461b-9c9e-3b0aa484071c.png?v=1780814154"},{"product_id":"jetprime-eliminator-sls-solenoid-bypass-kit-yamaha-yzf","title":"JetPrime Eliminator SLS Solenoid Bypass Kit – Yamaha YZF-R3 (2015-2020) JP ES 007","description":"\u003cp\u003eRid your Yamaha YZF-R3 of unwanted dashboard fault codes and secondary air system interference with the JetPrime Eliminator JP ES 007 — a precision-engineered SLS solenoid bypass designed exclusively for the YZF-R3 from 2015 to 2020. Plug-and-play simplicity meets race-grade reliability, so you can focus entirely on performance without the distraction of recurring warning lights.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBypasses the SLS PAIR circuit solenoid valve cleanly and completely, eliminating the root cause of secondary air system fault codes\u003c\/li\u003e\n\u003cli\u003eDeactivates dashboard error warnings triggered by SLS system removal or modification — no more nuisance alerts mid-session\u003c\/li\u003e\n\u003cli\u003eTrue plug-and-play design uses an OEM-matching connector, meaning no wire cutting, no splicing and no irreversible modifications to the harness\u003c\/li\u003e\n\u003cli\u003eDeveloped and validated specifically for the Yamaha YZF-R3 (2015-2020) — guaranteed fitment with no guesswork\u003c\/li\u003e\n\u003cli\u003ePremium-grade components throughout ensure long service life even under demanding track conditions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhy the SLS Eliminator Matters on Track\u003c\/h2\u003e\u003cp\u003eThe Yamaha YZF-R3's Secondary Air System (SLS) is an emissions-control device fitted for road-homologation purposes. Once the bike is prepared for closed-circuit competition — whether via an aftermarket exhaust, race ECU mapping or air filter upgrade — the SLS solenoid becomes redundant and typically triggers a persistent fault code on the dashboard. That warning light is more than cosmetic: it can mask genuine faults and creates unnecessary distraction during a race or practice session.\u003c\/p\u003e\u003cp\u003eThe JetPrime JP ES 007 eliminates this problem at source. By presenting the correct electrical signal to the ECU in place of the SLS solenoid, the eliminator convinces the bike's management system that everything is in order — cleanly and without any permanent alteration to the wiring loom. The OEM-spec connector drops straight onto the factory plug, making the installation reversible and straightforward even in a paddock environment.\u003c\/p\u003e\u003ch2\u003eBuild Quality and Fitment Confidence\u003c\/h2\u003e\u003cp\u003eJetPrime engineered the JP ES 007 around the exact connector specification of the Yamaha YZF-R3, so the fit is precise and the connection secure. Internal components are selected for resilience against heat, vibration and the moisture exposure typical of race paddocks and outdoor circuit work. The result is an eliminator that will outlast the bike's competition life without any additional maintenance.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThe JetPrime Eliminator JP ES 007 is designed for the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eYamaha YZF-R3 — model years 2015, 2016, 2017, 2018, 2019, 2020\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eImportant Safety Notice\u003c\/h2\u003e\u003cp\u003eThis product is intended exclusively for closed-circuit racing and competition use. It is not approved for road use and must not be fitted to any motorcycle operated on public roads.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: JetPrime\u003c\/li\u003e\n\u003cli\u003ePart number: JP ES 007\u003c\/li\u003e\n\u003cli\u003eFunction: SLS PAIR circuit solenoid bypass \/ fault code eliminator\u003c\/li\u003e\n\u003cli\u003eConnector type: OEM-matching plug (no wire cutting required)\u003c\/li\u003e\n\u003cli\u003eInstallation: Plug-and-play\u003c\/li\u003e\n\u003cli\u003eFitment: Yamaha YZF-R3 (2015-2020)\u003c\/li\u003e\n\u003cli\u003eIntended use: Track \/ closed-circuit competition only\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168766091530,"sku":"JP ES 007","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ES_007_33b00be7-f99d-49fa-9fed-86bd3920f60c.png?v=1780814156"},{"product_id":"jetprime-abs-eliminator-yamaha-yzf-r7","title":"JetPrime ABS Eliminator for Yamaha YZF-R7 (2021-2026) – JP ABSY 001","description":"\u003cp\u003eEngineered specifically for the Yamaha YZF-R7 in its 2021–2026 guise, the JetPrime ABS Eliminator JP ABSY 001 is the clean, purposeful solution for riders preparing their R7 for track-day competition. Where lesser fixes leave a tangle of spliced wires and dashboard warning lights, JetPrime's heritage in race electronics shows in every detail — a precision plug-and-play connector that mirrors the OEM fitment, a design developed and tested exclusively on the YZF-R7, and a finish that speaks to the Italian manufacturer's commitment to quality over compromise.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCompletely removes the ABS module, saving approximately 1 kg of unsprung and system weight for sharper, more responsive braking feel on track.\u003c\/li\u003e\n\u003cli\u003eSuppresses all related dashboard fault codes, keeping the instrument display clean and distraction-free during competition.\u003c\/li\u003e\n\u003cli\u003eOEM-matched connector design allows direct, plug-and-play installation — no cutting, no splicing, no irreversible wiring changes.\u003c\/li\u003e\n\u003cli\u003eDeveloped and dyno-tested specifically for the Yamaha YZF-R7 (2021–2026), ensuring perfect electrical compatibility straight out of the box.\u003c\/li\u003e\n\u003cli\u003ePremium-grade components throughout, selected for the thermal and vibrational demands of circuit riding.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign, Finish and Heritage\u003c\/h2\u003e\u003cp\u003eJetPrime has built its reputation supplying race teams and serious club competitors across Europe with electronics that match factory standards in both quality and precision. The JP ABSY 001 reflects that lineage: the connector housing is constructed to OEM tolerances, the wiring is rated for race conditions, and the unit's compact form factor slots neatly into the space vacated by the ABS module. There are no rough edges, no afterthought crimps — just a component that looks as considered as the bike it was made for.\u003c\/p\u003e\u003ch2\u003ePerformance on Track\u003c\/h2\u003e\u003cp\u003eRemoving ABS from a dedicated track bike is a well-established step in extracting the most from your braking zones. The factory ABS module adds system weight and introduces an electronic variable that experienced riders prefer to eliminate when chasing consistent lap times. With the JP ABSY 001 fitted, that roughly 1 kg of module weight is gone, the braking circuit is simplified, and the dashboard remains clear of fault warnings that would otherwise demand attention mid-session. The result is a bike that feels lighter, more direct, and easier to read through every corner entry.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis ABS eliminator is designed exclusively for the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eYamaha YZF-R7 — model years 2021, 2022, 2023, 2024, 2025, 2026\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eNote: This product is intended solely for motorsport and closed-circuit track use. It is not approved for use on public roads.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eJetPrime\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eJP ABSY 001\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eABS eliminator kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eYamaha YZF-R7 (2021–2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003ePlug-and-play, OEM connector — no wiring cuts required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight saving\u003c\/td\u003e\n\u003ctd\u003eApproximately 1 kg (ABS module removal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntended use\u003c\/td\u003e\n\u003ctd\u003eTrack \/ motorsport use only — not road legal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168766124298,"sku":"JP ABSY 001","price":170.82,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ABSY_001_08da238d-b4f3-40b6-9df2-8e1c18d6f9ed.png?v=1780814161"},{"product_id":"jetprime-sls-pair-solenoid-eliminator-yamaha-yzf-r1-m","title":"JetPrime SLS PAIR Solenoid Eliminator for Yamaha YZF-R1\/M (2010-2026) – JP ES 010","description":"\u003cp\u003eBuilt exclusively for track and racing use, the JetPrime Eliminator JP ES 010 is the clean, professional solution for bypassing the SLS PAIR circuit solenoid valve on the Yamaha YZF-R1 and YZF-R1M across the full 2010–2026 model range. It simultaneously suppresses the dashboard fault code that would otherwise follow removal of the secondary air system, keeping your dash clean and your focus on lap times.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBypasses the SLS PAIR circuit solenoid valve cleanly and completely, eliminating secondary air injection interference at high revs\u003c\/li\u003e\n\u003cli\u003eSuppresses the resulting dashboard fault\/error code so your instrument cluster reads correctly on track\u003c\/li\u003e\n\u003cli\u003ePure plug-and-play installation using an OEM-matched connector — no wire cutting, no splicing, no irreversible modifications\u003c\/li\u003e\n\u003cli\u003eDesigned and validated specifically for the Yamaha YZF-R1 and YZF-R1M (2010–2026), ensuring correct electrical compatibility\u003c\/li\u003e\n\u003cli\u003eHigh-quality components chosen for long-term durability in the demanding heat and vibration environment of race use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePerformance on Track\u003c\/h2\u003e\u003cp\u003eThe SLS (Secondary Air System) feeds fresh air into the exhaust ports to aid catalytic after-burning — a requirement for road homologation that serves no purpose on a race-prepared R1. Left in place during track use it can affect exhaust gas scavenging behaviour and introduce unwanted variables in throttle response. The JetPrime JP ES 010 eliminates the solenoid from the circuit entirely, allowing the engine and exhaust system to perform as intended without the ECU triggering a fault lamp.\u003c\/p\u003e\u003cp\u003eBecause installation requires nothing more than unplugging the factory connector and plugging in the JetPrime unit, the process is reversible should the bike need to return to road specification. The OEM-format connector sits flush and secure, with no risk of intermittent contact under race conditions.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis eliminator is engineered specifically for the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eYamaha YZF-R1 — all variants, model years 2010 to 2026\u003c\/li\u003e\n\u003cli\u003eYamaha YZF-R1M — all variants, model years 2015 to 2026\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: JetPrime\u003c\/li\u003e\n\u003cli\u003ePart number: JP ES 010\u003c\/li\u003e\n\u003cli\u003eFunction: SLS PAIR circuit solenoid eliminator with dashboard error suppression\u003c\/li\u003e\n\u003cli\u003eInstallation: Plug-and-play, OEM-matched connector, no wire cutting required\u003c\/li\u003e\n\u003cli\u003eFitment: Yamaha YZF-R1 \/ YZF-R1M (2010–2026)\u003c\/li\u003e\n\u003cli\u003eIntended use: Racing and track use only — not approved for road use\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNote: This product is approved for racing and track use only. It is not permitted for use on public roads.\u003c\/p\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168766615818,"sku":"JP ES 010","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JPES010.png?v=1780814178"},{"product_id":"jetprime-eliminator-abs-system-aprilia-rs-660-2020-2026","title":"JetPrime Eliminator ABS System for Aprilia RS 660 2020-2026 – JP ABSA 001","description":"\u003cp\u003eEngineered exclusively for the Aprilia RS 660, the JetPrime Eliminator ABS System JP ABSA 001 is the definitive plug-and-play solution for riders who demand every gram and every millisecond on track. By allowing the complete removal of the ABS module, this precision-crafted kit trims approximately 1 kg from the machine while silencing every related dashboard fault code — cleanly, instantly, without cutting a single wire.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnables full removal of the ABS system and module, saving approximately 1 kg in unsprung and chassis mass\u003c\/li\u003e\n\u003cli\u003eSuppresses all ABS-related dashboard fault codes after module removal, keeping the instrument cluster clean during track use\u003c\/li\u003e\n\u003cli\u003eOEM-spec connector included for a genuine plug-and-play fit — no wire cutting, no splicing, no irreversible modifications\u003c\/li\u003e\n\u003cli\u003eDeveloped and tested specifically for the Aprilia RS 660 model years 2020 to 2026, ensuring precise electrical compatibility\u003c\/li\u003e\n\u003cli\u003ePremium-grade components throughout for long-term reliability under race conditions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign, Finish and Heritage\u003c\/h2\u003e\u003cp\u003eJetPrime has built its reputation on race-proven electronics engineered to exacting Italian standards. The JP ABSA 001 reflects that heritage: every connector, every circuit path and every housing component is selected for durability in the demanding environment of a racing motorcycle. The kit ships with a purpose-manufactured OEM-pattern connector that mates directly to the RS 660 wiring loom, preserving the integrity of the harness and allowing the modification to be reversed if the bike ever returns to road or homologation duties. There is no bodged wiring, no generic adaptors — just a product designed around this specific motorcycle from the outset.\u003c\/p\u003e\u003ch2\u003ePerformance Gain and Track Application\u003c\/h2\u003e\u003cp\u003eRemoving the ABS module is a well-established weight-reduction step in RS 660 race preparation. The approximately 1 kg saved directly reduces the mass the chassis must manage under braking and acceleration, contributing to sharper turn-in and more responsive deceleration feedback to the rider. The JetPrime eliminator ensures the ECU and dashboard accept the absence of the ABS module without complaint, so the rider can concentrate fully on the session rather than chasing phantom warning lights.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis kit is designed and tested for the following motorcycle:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eAprilia RS 660 — model years 2020, 2021, 2022, 2023, 2024, 2025, 2026\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eAlways confirm your model year and variant before installation. This product is intended for track and race use only and is not approved for use on public roads.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: JetPrime\u003c\/li\u003e\n\u003cli\u003ePart number: JP ABSA 001\u003c\/li\u003e\n\u003cli\u003eType: ABS eliminator kit\u003c\/li\u003e\n\u003cli\u003eFitment: Aprilia RS 660 (2020-2026)\u003c\/li\u003e\n\u003cli\u003eConnection type: OEM-spec plug-and-play connector\u003c\/li\u003e\n\u003cli\u003eWeight saving: approximately 1 kg (upon removal of ABS module)\u003c\/li\u003e\n\u003cli\u003eInstallation: no wire cutting required\u003c\/li\u003e\n\u003cli\u003eIntended use: track and race use only — not road legal\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWarning: This product is intended exclusively for motorsport and racing use. It is not approved for use on public roads.\u003c\/p\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168812622090,"sku":"JP ABSA 001","price":201.88,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ABSA_001.png?v=1780816231"},{"product_id":"jetprime-indicator-eliminators-bmw-s1000rr-hp4-jp-es","title":"JetPrime Indicator Eliminators for BMW S1000RR \u0026 HP4 (2009-2020) – JP ES 036 A (Pair)","description":"\u003cp\u003eStrip the indicators from your BMW S1000RR or HP4 and keep the dashboard completely clean. The JetPrime JP ES 036 A indicator eliminators are precision-engineered electronic modules that fool the ECU into registering no fault, leaving the instrument cluster error-free the moment the indicators come off.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRemoves both front and rear indicators while suppressing the resulting ECU fault code\u003c\/li\u003e\n\u003cli\u003eKeeps the dashboard free of warning lights — no error messages after indicator removal\u003c\/li\u003e\n\u003cli\u003eDesigned and validated specifically for the BMW S1000RR and HP4 (2009–2020)\u003c\/li\u003e\n\u003cli\u003eSimple plug-and-play electronic solution — no ECU remapping required\u003c\/li\u003e\n\u003cli\u003eBuilt for track and race use, where a clean, lightweight setup is essential\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign, Finish and Heritage\u003c\/h2\u003e\u003cp\u003eJetPrime has built a strong reputation in the European racing accessory market by focusing on one thing: solutions that work cleanly, without compromise. The JP ES 036 A pair reflects that philosophy — compact, unobtrusive modules finished to a consistent standard that suits the S1000RR's precision engineering. Where many generic eliminator kits leave residual fault codes or require awkward resistor workarounds, JetPrime's dedicated design targets the S1000RR and HP4 electrical architecture directly, delivering a result that is as tidy electronically as it is visually.\u003c\/p\u003e\u003ch2\u003eTrack Use and Practicality\u003c\/h2\u003e\u003cp\u003eOn circuit, indicators are unnecessary weight and drag. Removing them is a standard preparation step for track-day riders and club racers alike. The challenge has always been the resulting dashboard fault — a persistent warning that can obscure other critical information. The JP ES 036 A eliminates that problem entirely, giving you a clean instrument display to focus on what matters during a session. The pair format means both indicator circuits are handled in a single kit, keeping the installation straightforward and the result consistent across the bike.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThese indicator eliminators fit the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBMW S1000RR — 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020\u003c\/li\u003e\n\u003cli\u003eBMW HP4 — 2009 to 2020 (same electrical architecture)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease verify your model year before ordering. This product is intended exclusively for track and race use and is not approved for use on public roads.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: JetPrime\u003c\/li\u003e\n\u003cli\u003ePart number: JP ES 036 A\u003c\/li\u003e\n\u003cli\u003eType: Indicator eliminators (electronic ECU deceivers)\u003c\/li\u003e\n\u003cli\u003eQuantity: 2 (pair)\u003c\/li\u003e\n\u003cli\u003eFitment: BMW S1000RR \/ HP4, 2009–2020\u003c\/li\u003e\n\u003cli\u003eFunction: Removes indicator fault codes from dashboard after indicator removal\u003c\/li\u003e\n\u003cli\u003eIntended use: Track and race use only — not road legal\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168851878154,"sku":"JP ES 036 A","price":31.06,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ES_036_A.png?v=1780817632"},{"product_id":"jetprime-indicator-eliminators-bmw-s1000rr-hp4-set-jp","title":"JetPrime Indicator Eliminators for BMW S1000RR \u0026 HP4 (2009-2020) – Set of 4 | JP ES 036 B","description":"\u003cp\u003eStripping indicators from your BMW S1000RR or HP4 for track use is a clean, straightforward job — provided the ECU never finds out. The JetPrime JP ES 036 B kit includes four electronic indicator eliminators that plug directly into the OEM harness, keeping the dashboard fault-free and the display reading exactly as it should after the indicators are removed.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRemoves all four indicators from the motorcycle without triggering any dashboard fault codes\u003c\/li\u003e\n\u003cli\u003eDeceives the ECU electronically so the instrument cluster shows a clean, error-free display\u003c\/li\u003e\n\u003cli\u003ePlug-and-play installation — no soldering, no wiring modifications required\u003c\/li\u003e\n\u003cli\u003eDeveloped and tested specifically for the BMW S1000RR (2009-2020) and HP4\u003c\/li\u003e\n\u003cli\u003eReliable, durable construction built to withstand the demands of regular track use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eClean Cockpit, Zero Faults\u003c\/h2\u003e\u003cp\u003eModern superbikes like the S1000RR monitor indicator circuits continuously. Pull an indicator without the correct load on the line and the dash lights up with errors that can interfere with electronics and distract from the job at hand on a fast circuit. JetPrime's JP ES 036 B eliminators solve this by presenting the correct electrical load to the control unit, so the bike sees four functioning indicators even when there are none. The result is a tidy, trackday-ready motorcycle with a spotless instrument display.\u003c\/p\u003e\u003ch2\u003eBuild Quality\u003c\/h2\u003e\u003cp\u003eJetPrime designs these eliminators specifically for BMW's S1000RR platform across the full 2009-2020 production run, including the HP4 variant. Each unit is engineered to the correct impedance and voltage characteristics for the OEM wiring, ensuring consistent performance over repeated trackday seasons without degradation in signal quality.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis kit fits the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBMW S1000RR — model years 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020\u003c\/li\u003e\n\u003cli\u003eBMW HP4 — all years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eJetPrime\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eJP ES 036 B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003e4 indicator eliminators per kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eBMW S1000RR (2009-2020), BMW HP4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eRemoves indicators and suppresses dashboard fault codes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003ePlug-and-play, OEM connector compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntended use\u003c\/td\u003e\n\u003ctd\u003eRace \/ track use only — not road-legal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003eNotice: This product is designed exclusively for motorsport and race track use. It is not approved for use on public roads.\u003c\/p\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168851910922,"sku":"JP ES 036 B","price":62.12,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ES_036_B.png?v=1780817633"},{"product_id":"jetprime-exhaust-valve-eliminator-bmw-s1000rr","title":"JetPrime Exhaust Valve Eliminator for BMW S1000RR (2009-2018) – JP EX 001 B","description":"\u003cp\u003eFitting an aftermarket exhaust to your BMW S1000RR (2009-2018) should not mean putting up with a persistent dashboard fault code or hunting for somewhere to mount an unwanted servo motor. The JetPrime Exhaust Valve Eliminator JP EX 001 B solves both problems at once: a straightforward plug-in unit that tells the ECU the valve circuit is intact, so the warning light stays off and you can get on with riding.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEliminates the exhaust valve servo motor from the system, removing unnecessary weight and complexity when fitting aftermarket exhausts\u003c\/li\u003e\n\u003cli\u003eSuppresses the fault code that the dashboard would otherwise display once the original valve assembly is removed\u003c\/li\u003e\n\u003cli\u003eDesigned and tested specifically for the BMW S1000RR across the full 2009-2018 model range, ensuring a precise, reliable fit\u003c\/li\u003e\n\u003cli\u003eSimple installation — plugs directly into the existing wiring loom with no cutting or splicing required\u003c\/li\u003e\n\u003cli\u003eCompact and discreet, with no need to find mounting space for a bulky servo that aftermarket systems never accommodate\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEveryday Usability and Practical Value\u003c\/h2\u003e\u003cp\u003eFor any S1000RR owner swapping to a slip-on silencer or full aftermarket exhaust system, this eliminator makes the conversion genuinely clean. Without it, removing the stock exhaust valve triggers a fault that can prevent the bike from running correctly and causes a warning light that is difficult to ignore on a daily basis. The JP EX 001 B removes that concern entirely: the ECU reads a normal signal, the instrument cluster stays clear, and the bike behaves exactly as it should. The weight saving from removing the servo motor and valve mechanism is a welcome bonus, particularly for track-day riders who want to trim every unnecessary gram.\u003c\/p\u003e\u003ch2\u003eBuild Quality and Reliability\u003c\/h2\u003e\u003cp\u003eJetPrime developed the JP EX 001 B exclusively for the S1000RR platform, which means the connector pinout, signal characteristics and software mapping all match the BMW ECU precisely. The unit is built to withstand the heat and vibration environment of a high-performance inline-four, delivering consistent, long-term reliability whether the bike sees weekend track days or regular road use.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis exhaust valve eliminator fits the following motorcycle:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBMW S1000RR — model years 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003ePlease note: this product is intended for motorsport and closed-circuit use only. It is not approved for use on public roads.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: JetPrime\u003c\/li\u003e\n\u003cli\u003ePart number: JP EX 001 B\u003c\/li\u003e\n\u003cli\u003eType: Exhaust valve eliminator \/ servo motor eliminator\u003c\/li\u003e\n\u003cli\u003eFitment: BMW S1000RR (2009-2018)\u003c\/li\u003e\n\u003cli\u003eFunction: Removes exhaust valve servo motor and suppresses ECU fault codes\u003c\/li\u003e\n\u003cli\u003eInstallation: Plug-and-play, connects to existing wiring loom\u003c\/li\u003e\n\u003cli\u003eIntended use: Motorsport \/ closed-circuit only\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168852074762,"sku":"JP EX 001 B","price":113.88,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_EX_001_B.png?v=1780817645"},{"product_id":"jetprime-sls-solenoid-eliminator-bmw-s1000rr","title":"JetPrime SLS Solenoid Eliminator for BMW S1000RR (2009-2026) – JP ES 034","description":"\u003cp\u003eDesigned exclusively for track and racing use, the JetPrime SLS Solenoid Eliminator JP ES 034 bypasses the SLS PAIR circuit solenoid valve on the BMW S1000RR and simultaneously suppresses the dashboard fault codes that follow — delivering a cleaner, more focused power delivery without warning light distractions on the pit display.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBypasses the SLS PAIR circuit solenoid valve, eliminating secondary air system interference for race-focused performance\u003c\/li\u003e\n\u003cli\u003eSuppresses dashboard fault codes triggered by SLS system removal, keeping the ECU display clean during competition\u003c\/li\u003e\n\u003cli\u003eTrue plug-and-play fitment using an OEM-matched connector — no wire cutting, no splicing, no irreversible modifications\u003c\/li\u003e\n\u003cli\u003ePrecision-engineered and track-tested specifically for the BMW S1000RR across the full 2009-2026 production run\u003c\/li\u003e\n\u003cli\u003eHigh-quality components ensure consistent reliability across demanding race and track day conditions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEngineering \u0026amp; Build Quality\u003c\/h2\u003e\u003cp\u003eThe JP ES 034 is built to the exacting standards JetPrime applies across its race electronics range. The OEM-specification connector ensures a direct, secure fit into the existing wiring loom without any cutting or taping. Components are selected for longevity under the heat and vibration loads typical of sustained track use, so you can run race after race with confidence.\u003c\/p\u003e\u003ch2\u003eTrack Performance Gains\u003c\/h2\u003e\u003cp\u003eRemoving the secondary air system from the equation tightens throttle response and reduces unnecessary load on the intake circuit. By eliminating the solenoid valve and preventing associated fault codes from interfering with the dashboard, the JP ES 034 lets the S1000RR's electronics operate without extraneous inputs — an important consideration when every tenth counts on circuit. Installation is straightforward enough to complete in the paddock without specialist tools.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis eliminator is designed and validated for the following motorcycle:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBMW S1000RR — all variants, model years 2009 to 2026\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSafety Notice\u003c\/h2\u003e\u003cp\u003eThis product is intended exclusively for racing and track day use. It is not approved or homologated for use on public roads.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eJetPrime\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eJP ES 034\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003eSLS solenoid eliminator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eBypasses SLS PAIR circuit solenoid valve; suppresses dashboard fault codes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eBMW S1000RR (2009-2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003ePlug-and-play; OEM connector, no wire cutting required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntended use\u003c\/td\u003e\n\u003ctd\u003eRacing and track use only — not road legal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168852107530,"sku":"JP ES 034","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ES_034.png?v=1780817646"},{"product_id":"jetprime-sls-solenoid-eliminator-bmw-m1000rr-k66","title":"JetPrime SLS Solenoid Eliminator for BMW M1000RR K66 (2021-2026) – JP ES 034","description":"\u003cp\u003eRid your BMW M1000RR K66 of unwanted dashboard fault codes the moment you remove the secondary air system. The JetPrime JP ES 034 SLS solenoid eliminator bypasses the PAIR circuit solenoid valve and silences the ECU warning in a single, clean plug-and-play connection — no wire cutting, no guesswork, no compromise on reliability.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBypasses the SLS PAIR circuit solenoid valve to eliminate the root cause of secondary air system fault codes\u003c\/li\u003e\n\u003cli\u003eDeactivates dashboard error warnings triggered by SLS removal, keeping the instrument cluster clean and distraction-free\u003c\/li\u003e\n\u003cli\u003eTrue plug-and-play design using an OEM-matched connector — no wiring modifications or cutting required\u003c\/li\u003e\n\u003cli\u003ePurpose-engineered and tested exclusively for the BMW M1000RR K66 covering the 2021 to 2026 model years\u003c\/li\u003e\n\u003cli\u003ePremium-grade components ensure lasting durability across hard track sessions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEngineering \u0026amp; Build Quality\u003c\/h2\u003e\u003cp\u003eJetPrime has built the JP ES 034 around an OEM-specification connector that mates directly to the BMW M1000RR K66 wiring loom. The result is a secure, rattle-free fitment that requires no splicing, no soldering and no aftermarket adaptors. The internal components are selected for consistent electrical performance under the thermal and vibration loads typical of track use, so the eliminator remains reliable race weekend after race weekend.\u003c\/p\u003e\u003ch2\u003ePerformance Benefit on Track\u003c\/h2\u003e\u003cp\u003eWhen the secondary air injection system is removed as part of a full race exhaust or emissions-equipment delete, the standard ECU logs a fault against the solenoid valve and illuminates a warning on the dashboard. The JP ES 034 presents the correct signal to the ECU so that no fault is stored, the warning light stays off, and the rider is free to focus entirely on lap times. The straightforward installation means less time in the garage and more time on track.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis eliminator is designed and validated specifically for the following motorcycle:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBMW M1000RR – chassis code K66 – model years 2021, 2022, 2023, 2024, 2025 and 2026\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003ePlease verify your chassis code before ordering if you are unsure of your build year.\u003c\/p\u003e\u003ch2\u003eImportant Notice\u003c\/h2\u003e\u003cp\u003eThis product is intended exclusively for closed-circuit motorsport and competition use. It is not approved for use on public roads and must not be fitted to road-registered vehicles.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: JetPrime\u003c\/li\u003e\n\u003cli\u003ePart number: JP ES 034\u003c\/li\u003e\n\u003cli\u003eType: SLS solenoid eliminator\u003c\/li\u003e\n\u003cli\u003eFunction: Bypasses SLS PAIR circuit solenoid valve and suppresses dashboard fault codes\u003c\/li\u003e\n\u003cli\u003eConnection: OEM-matched plug-and-play connector\u003c\/li\u003e\n\u003cli\u003eInstallation: No wire cutting required\u003c\/li\u003e\n\u003cli\u003eFitment: BMW M1000RR K66 (2021-2026)\u003c\/li\u003e\n\u003cli\u003eIntended use: Closed-circuit motorsport only\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168852173066,"sku":"JP ES 034","price":24.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ES_034_c38988f3-3315-4fd8-b33f-fde19ec96aa0.png?v=1780817647"},{"product_id":"jetprime-tail-light-eliminator-bmw-s1000rr","title":"JetPrime Tail Light Eliminator for BMW S1000RR (2009-2020) – JP ES 032","description":"\u003cp\u003eRemoving the rear light assembly from your BMW S1000RR should not mean living with a dashboard full of fault codes. The JetPrime JP ES 032 tail light eliminator plugs directly into the stock harness and silences those warnings instantly, letting you get on with riding — or racing — without distraction.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSuppresses dashboard fault codes triggered by tail light removal, keeping the instrument cluster clean and readable\u003c\/li\u003e\n\u003cli\u003ePlug-and-play design uses an OEM-spec connector — no wire cutting, no splicing, no permanent modification to the loom\u003c\/li\u003e\n\u003cli\u003eDeveloped and tested specifically for the BMW S1000RR across the full 2009–2020 production run\u003c\/li\u003e\n\u003cli\u003eQuality components selected for long-term reliability even under demanding track conditions\u003c\/li\u003e\n\u003cli\u003eA straightforward, low-cost fix that saves time at the garage and frustration on the day\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEveryday Usability\u003c\/h2\u003e\u003cp\u003eWhether you are prepping the S1000RR for track days, fitting a tail tidy, or simply tidying up the rear-end on a stripped streetfighter build, the JP ES 032 addresses the most common frustration: the bike throwing a fault the moment the original tail light is unplugged. The OEM connector means installation takes a matter of minutes with no specialist tools, and the job is equally easy to reverse if needed. That combination of simplicity and reliability is what makes this eliminator a sensible first purchase alongside any rear lighting upgrade.\u003c\/p\u003e\u003ch2\u003eBuild Quality \u0026amp; Reliability\u003c\/h2\u003e\u003cp\u003eJetPrime engineer their eliminators to match the electrical characteristics the S1000RR's ECU expects from the original tail light circuit. Using quality internal components, the JP ES 032 presents the correct load to the system so the fault suppression remains stable over time rather than triggering intermittently. It is a small part that does one job, and it does that job consistently.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis eliminator is designed exclusively for the BMW S1000RR, covering all model years from 2009 through to 2020. It is not compatible with other BMW models or model years outside that range without independent verification. Please confirm your exact year before ordering.\u003c\/p\u003e\u003cp\u003eNote: This product is intended for race and track use only. It is not approved for use on public roads.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: JetPrime\u003c\/li\u003e\n\u003cli\u003ePart number: JP ES 032\u003c\/li\u003e\n\u003cli\u003eType: Tail light eliminator \/ fault code suppressor\u003c\/li\u003e\n\u003cli\u003eConnection: OEM-spec plug-and-play connector\u003c\/li\u003e\n\u003cli\u003eFitment: BMW S1000RR, 2009–2020\u003c\/li\u003e\n\u003cli\u003eInstallation: No wire cutting required\u003c\/li\u003e\n\u003cli\u003eIntended use: Race and track use only — not road legal\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168852271370,"sku":"JP ES 032","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ES_032.png?v=1780817651"},{"product_id":"jetprime-side-stand-eliminator-bmw-s1000rr","title":"JetPrime Side Stand Eliminator for BMW S1000RR (2009-2026) – JP ES 039","description":"\u003cp\u003eEngineered specifically for the BMW S1000RR across its entire production run from 2009 to 2026, the JetPrime JP ES 039 side stand eliminator draws on JetPrime's deep motorsport heritage to deliver a precision-made, plug-and-play solution that bypasses the side stand switch and silences dashboard fault codes in a single clean installation.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBypasses the side stand switch completely, eliminating nuisance cut-outs on track\u003c\/li\u003e\n\u003cli\u003eSuppresses dashboard fault codes triggered by side stand switch removal or bypass\u003c\/li\u003e\n\u003cli\u003eTrue plug-and-play fitment — no wire cutting, no splicing, no permanent modifications\u003c\/li\u003e\n\u003cli\u003eShips with an OEM-spec connector for a direct, factory-quality electrical connection\u003c\/li\u003e\n\u003cli\u003eDesigned, developed and tested exclusively for the BMW S1000RR (2009-2026)\u003c\/li\u003e\n\u003cli\u003ePremium-grade components selected for long-term reliability under race conditions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign, Finish and Heritage\u003c\/h2\u003e\u003cp\u003eJetPrime has built its reputation supplying professional race teams and serious club racers with electronics that meet the demands of sustained track use. The JP ES 039 reflects that background: every component is chosen for durability rather than minimum cost, and the OEM-style connector ensures the module sits cleanly in the existing loom without compromising the harness. The result is a discreet, tidy installation that looks as considered as the engineering behind it.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eFitting the JP ES 039 takes minutes. Locate the side stand switch connector, unplug the stock switch and plug in the JetPrime eliminator module. The OEM-matched connector locks positively into place, the dashboard warning clears, and the bike is ready for the paddock. No specialist tools, no wiring diagrams and no permanent alterations to the motorcycle are required.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThe JP ES 039 is a direct replacement designed exclusively for the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBMW S1000RR — all variants, model years 2009 to 2026\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eJetPrime\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eJP ES 039\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eSide stand switch eliminator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment\u003c\/th\u003e\n\u003ctd\u003eBMW S1000RR (2009–2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003ePlug-and-play, OEM connector — no wire cutting required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003ctd\u003eBypasses side stand switch and suppresses dashboard fault codes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntended Use\u003c\/th\u003e\n\u003ctd\u003eRace and track use only — not road legal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003eImportant: This product is intended exclusively for motorsport and track day use. It is not approved for use on public roads.\u003c\/p\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168852336906,"sku":"JP ES 039","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JPES039.png?v=1780817652"},{"product_id":"jetprime-canister-eliminator-system-bmw-s1000rr-k67","title":"JetPrime Canister Eliminator System for BMW S1000RR K67 (2019-2026) – JP ES 030","description":"\u003cp\u003eStripping unnecessary weight and eliminating nuisance fault codes from your BMW S1000RR K67 has never been more straightforward. The JetPrime Canister Eliminator System JP ES 030 is a complete, plug-and-play kit that removes the EVAP canister, electronic purge valve, and all associated hoses cleanly and without cutting a single wire — giving you a tidier engine bay and one less source of electrical gremlins to worry about.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDisables the fuel injection fault codes associated with the EVAP purge valve, preventing dashboard warning lights after removal\u003c\/li\u003e\n\u003cli\u003eComplete removal of the EVAP system (activated carbon canister) and all related hoses in a single kit\u003c\/li\u003e\n\u003cli\u003ePlug-and-play design with OEM-compatible connector — no wire cutting, no splicing, no specialist tools required\u003c\/li\u003e\n\u003cli\u003eDoubles as a direct replacement for a failed or faulty purge valve, restoring clean ECU communication\u003c\/li\u003e\n\u003cli\u003eHeat-resistant rubber caps seal the open hose ends reliably, built to withstand the thermal demands of track use\u003c\/li\u003e\n\u003cli\u003eEngineered and tested exclusively for the BMW S1000RR K67 platform, ensuring precise fitment every time\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eClean Installation, Reliable Results\u003c\/h2\u003e\u003cp\u003eThe JP ES 030 kit centres on an electronic purge valve eliminator that connects via the factory OEM plug. There is no need to modify the wiring loom or rely on generic resistor tricks — the eliminator communicates directly with the ECU to suppress the associated Fi fault codes from the moment it is connected. The heat-resistant rubber caps that seal the vacated hose ports are purpose-made for this application and rated to handle the temperatures generated in close proximity to the engine.\u003c\/p\u003e\u003cp\u003eEvery component in the kit has been quality-tested to guarantee longevity under repeated track sessions. Whether you are removing the EVAP system as a preventative measure during a full race build or replacing a valve that has already failed, the JP ES 030 delivers a factory-quality finish with minimal effort.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis canister eliminator system is designed exclusively for the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBMW S1000RR K67 — model years 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003ePlease verify your frame designation (K67) before ordering. This kit is not compatible with earlier S1000RR generations (K46 or K10).\u003c\/p\u003e\u003ch2\u003eImportant Notice\u003c\/h2\u003e\u003cp\u003eThis kit is intended solely for closed-circuit motorsport and racing use. It is not approved for road use and must not be fitted to any motorcycle operated on public roads.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: JetPrime\u003c\/li\u003e\n\u003cli\u003ePart number: JP ES 030\u003c\/li\u003e\n\u003cli\u003eType: EVAP canister eliminator system\u003c\/li\u003e\n\u003cli\u003eFitment: BMW S1000RR K67 (2019-2026)\u003c\/li\u003e\n\u003cli\u003eInstallation: Plug-and-play, OEM connector, no wire cutting required\u003c\/li\u003e\n\u003cli\u003eIncluded components: Electronic purge valve eliminator, heat-resistant rubber hose caps, EVAP hose removal kit\u003c\/li\u003e\n\u003cli\u003eIntended use: Closed-circuit motorsport \/ racing only — not road legal\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168852402442,"sku":"JP ES 030","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ES_030.png?v=1780817657"},{"product_id":"jetprime-canister-eliminator-kit","title":"JetPrime Canister Eliminator Kit – BMW M1000RR K66 (2021-2026) JP ES 030","description":"\u003cp\u003eStrip away the dead weight of the EVAP system and silence those nagging fault codes for good. The JetPrime JP ES 030 canister eliminator kit is engineered exclusively for the BMW M1000RR K66 (2021-2026), giving track-focused riders a clean, complete solution to delete the activated charcoal canister, the electronic purge valve and every associated EVAP hose in one straightforward plug-and-play installation.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEliminates Fi fault codes linked to the EVAP purge valve — no more warning lights disrupting your session\u003c\/li\u003e\n\u003cli\u003eServes as a direct replacement for a failed or failing purge valve, removing the root cause rather than masking it\u003c\/li\u003e\n\u003cli\u003eAllows full removal of the EVAP system (activated charcoal canister) and all associated hoses, freeing up space and reducing unnecessary weight\u003c\/li\u003e\n\u003cli\u003ePure plug-and-play design — no wire cutting, no splicing, no irreversible modifications to the loom\u003c\/li\u003e\n\u003cli\u003eSupplied with an OEM-spec connector for a direct, secure electrical connection\u003c\/li\u003e\n\u003cli\u003eHeat-resistant rubber caps protect open hose ends, ensuring long-term durability under race conditions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEngineering \u0026amp; Build Quality\u003c\/h2\u003e\u003cp\u003eJetPrime has designed the JP ES 030 from the ground up to match the specific wiring architecture and hose routing of the M1000RR K66. Every component in the kit has been individually tested to withstand the thermal and vibrational demands of track use. The OEM-pattern connector slots directly into the bike's existing harness, so the ECU sees a clean signal rather than an open circuit, which is precisely what prevents the fault codes from triggering. Heat-resistant rubber caps seal each vacated hose port, keeping moisture and debris out of the system regardless of conditions.\u003c\/p\u003e\u003ch2\u003ePerformance \u0026amp; Track Use\u003c\/h2\u003e\u003cp\u003eThe EVAP system is a road-legal emissions requirement with no performance benefit on circuit. By removing the canister, purge valve and associated plumbing, you eliminate a set of components that add weight and complexity without contributing to power delivery or engine efficiency. The JP ES 030 lets you run the M1000RR K66 in its cleanest possible specification — no residual fuel vapour management hardware, no spurious fault codes, no compromises. This kit is developed and tested specifically for race use and is intended solely for closed-circuit competition.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis kit is designed and tested specifically for the following motorcycle:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBMW M1000RR K66 — model years 2021, 2022, 2023, 2024, 2025, 2026\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: JetPrime\u003c\/li\u003e\n\u003cli\u003ePart number: JP ES 030\u003c\/li\u003e\n\u003cli\u003eType: EVAP canister eliminator kit\u003c\/li\u003e\n\u003cli\u003eFitment: BMW M1000RR K66 (2021-2026)\u003c\/li\u003e\n\u003cli\u003eConnector type: OEM-spec direct plug-in\u003c\/li\u003e\n\u003cli\u003eHose caps: heat-resistant rubber\u003c\/li\u003e\n\u003cli\u003eInstallation: plug-and-play, no wire cutting required\u003c\/li\u003e\n\u003cli\u003eIntended use: race use only — not road legal\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eRace use only. This kit is intended exclusively for closed-circuit competition and is not approved for use on public roads.\u003c\/p\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168852500746,"sku":"JP ES 030","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ES_030_ab0488ff-eb89-4066-8697-58dfd3d8b96e.png?v=1780817660"},{"product_id":"jetprime-rear-brake-light-eliminator-aprilia-rsv4-rr-1100-factory","title":"JetPrime Rear Brake Light Eliminator for Aprilia RSV4 \/ RR \/ 1100 Factory (2021-2026) – JP ES 009","description":"\u003cp\u003eRunning a tail tidy or removing the rear brake light on your Aprilia RSV4, RSV4 RR or RSV4 1100 Factory for track use? The JetPrime JP ES 009 is the clean, professional solution — a purpose-built plug-and-play eliminator that bypasses the rear brake light circuit and silences the dashboard fault warning in a single, wire-cut-free installation.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBypasses the rear brake light circuit completely, eliminating dashboard error codes without cutting a single wire\u003c\/li\u003e\n\u003cli\u003ePlug-and-play design uses an OEM-matched connector for a direct, secure fit — no soldering, no splicing\u003c\/li\u003e\n\u003cli\u003eDeveloped and tested specifically for the Aprilia RSV4, RSV4 RR and RSV4 1100 Factory (2021-2026), ensuring precise electrical compatibility\u003c\/li\u003e\n\u003cli\u003ePremium-grade components throughout for lasting reliability in the demanding conditions of track use\u003c\/li\u003e\n\u003cli\u003eKeeps the ECU satisfied and the dashboard clean — no warning lights, no fault codes after installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eClean Installation, Reliable Performance\u003c\/h2\u003e\u003cp\u003eThe JP ES 009 arrives ready to fit. The OEM-spec connector mates directly with the bike's existing harness, so the job takes minutes rather than an afternoon. Because no wires are cut or modified, the original loom remains completely intact — making it straightforward to return the motorcycle to standard if required. High-quality internal components ensure the eliminator handles the electrical demands of sustained track sessions without issue.\u003c\/p\u003e\u003ch2\u003eDesigned for the Track\u003c\/h2\u003e\u003cp\u003eRemoving the rear brake light is a common requirement when fitting a race-spec tail unit or competing under circuit regulations. Without a dedicated eliminator, the Aprilia's ECU will log a fault and display a warning on the dashboard — distracting and, in some series, an eligibility concern. The JetPrime JP ES 009 resolves both issues simultaneously, letting you focus entirely on lap times rather than warning lights.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis eliminator is designed exclusively for the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAprilia RSV4 (2021-2026)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 RR (2021-2026)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 1100 Factory (2021-2026)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: JetPrime\u003c\/li\u003e\n\u003cli\u003ePart number: JP ES 009\u003c\/li\u003e\n\u003cli\u003eFunction: Rear brake light eliminator with dashboard error suppression\u003c\/li\u003e\n\u003cli\u003eConnection type: OEM plug-and-play connector — no wire cutting required\u003c\/li\u003e\n\u003cli\u003eFitment: Aprilia RSV4 \/ RSV4 RR \/ RSV4 1100 Factory, model years 2021-2026\u003c\/li\u003e\n\u003cli\u003eIntended use: Race \/ track use only — not approved for road use\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note: This product is intended exclusively for motorsport and track use. It is not approved or permitted for use on public roads.\u003c\/p\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168888119562,"sku":"JP ES 009","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ES_009_123b2b9c-7e50-4622-ba48-877626b772a5.png?v=1780818200"},{"product_id":"jetprime-canister-eliminator-ducati-panigale-v4-s-r","title":"JetPrime Canister Eliminator for Ducati Panigale V4\/S\/R (2025-2026) – JP ES 063","description":"\u003cp\u003eTrack-day regulations and scrutineering demand a clean, fault-free machine — and the JetPrime Canister Eliminator JP ES 063 gives you exactly that. Designed specifically for the Ducati Panigale V4, V4 S, and V4 R (model years 2025–2026), it allows complete removal of the stock EVAP system with no error codes triggered in the ECU, so your bike passes checks and runs cleanly every session.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRemoves the entire EVAP\/canister system, including the purge valve, filter, and all associated hoses, leaving the engine bay uncluttered\u003c\/li\u003e\n\u003cli\u003eIntegrated electronic resistor prevents ECU fault codes and warning lights after removal — no remapping required\u003c\/li\u003e\n\u003cli\u003ePlug and play installation: no modifications to the vehicle wiring or electronics are needed\u003c\/li\u003e\n\u003cli\u003eFrees up valuable space in the engine bay for additional racing components or improved airflow management\u003c\/li\u003e\n\u003cli\u003eReduces overall weight by eliminating redundant emissions hardware\u003c\/li\u003e\n\u003cli\u003eImproves accessibility for maintenance and future modifications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhy Remove the EVAP System for Track Use?\u003c\/h2\u003e\u003cp\u003eThe standard EVAP system on the Panigale V4 routes fuel vapour from the tank through an activated carbon canister before recirculating it via a purge valve. On a road bike this serves a legitimate emissions function, but on a dedicated track machine it occupies prime real estate in the engine bay, adds unnecessary mass, and can occasionally introduce driveability issues at high engine loads. The JetPrime JP ES 063 replaces the entire assembly with a compact electronic module that convinces the ECU the system is still present and operating correctly — so you gain the space and weight saving without the headache of persistent fault codes.\u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cp\u003eThe heart of the JP ES 063 is a precision-matched electronic eliminator module that simulates the correct resistance signature of the OEM purge valve. Combined with purpose-made blanking plugs and ancillary hardware, the kit is engineered to the tolerances demanded by Superbike and Superstock racing. High-grade components ensure the module remains stable across the full operating temperature range of a track-ridden Panigale.\u003c\/p\u003e\u003ch2\u003eImportant Safety \u0026amp; Compliance Notice\u003c\/h2\u003e\u003cp\u003eThis product is intended exclusively for closed-circuit motorsport use. It is not approved for use on public roads and will render the motorcycle non-compliant with road traffic emissions regulations. Always verify that its use is permitted under the specific regulations of your race series or event.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale V4 (2025–2026)\u003c\/li\u003e\n\u003cli\u003eDucati Panigale V4 S (2025–2026)\u003c\/li\u003e\n\u003cli\u003eDucati Panigale V4 R (2025–2026)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eJetPrime\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eJP ES 063\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eEVAP canister eliminator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003ePlug and play, no ECU remapping required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eDucati Panigale V4 \/ V4 S \/ V4 R (2025–2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntended Use\u003c\/td\u003e\n\u003ctd\u003eTrack \/ closed-circuit motorsport only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53169017815306,"sku":"JP ES 063","price":36.24,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JPES0631.png?v=1780819224"},{"product_id":"jetprime-electronic-steering-damper-eliminator-ducati-panigale-v4-s-jp","title":"JetPrime Electronic Steering Damper Eliminator for Ducati Panigale V4\/S (2025-2026) JP ESR 009","description":"\u003cp\u003eSwitching to a mechanical or fully adjustable racing steering damper on your Ducati Panigale V4\/S (2025-2026) is the natural next step for serious track work — but the OEM electronics will throw fault codes the moment the original unit is disconnected. The JetPrime JP ESR 009 eliminator solves that cleanly, simulating the factory steering damper signal so the ECU stays quiet and your dash remains clear.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eElectronically simulates the OEM steering damper so the ECU registers no fault\u003c\/li\u003e\n\u003cli\u003eEliminates dashboard warning lights when the original damper is removed\u003c\/li\u003e\n\u003cli\u003eFrees you to fit any mechanical or fully adjustable racing steering damper\u003c\/li\u003e\n\u003cli\u003ePlug and play connection directly to the factory wiring connector — no ECU remapping required\u003c\/li\u003e\n\u003cli\u003eSplash-proof and vibration-resistant encapsulation for reliable track use\u003c\/li\u003e\n\u003cli\u003eRemoves unnecessary OEM mass and clears valuable space in the steering area\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePurpose and Performance\u003c\/h2\u003e\u003cp\u003eOn the Ducati Panigale V4\/S, the factory electronic steering damper is a sophisticated piece of kit on the road, but on track it is routinely replaced with a lighter, manually adjustable unit that gives the rider more direct feel and precise damping control. The problem has always been the ECU: remove the OEM damper without a substitute signal and the bike logs a fault, illuminates warnings, and may alter its behaviour in ways that distract from focused riding.\u003c\/p\u003e\u003cp\u003eThe JP ESR 009 addresses this by presenting the ECU with an electronic resistance that exactly matches OEM specification. The control unit sees what it expects to see, continues to operate normally, and the rider is free to choose their preferred aftermarket steering damper without any software intervention.\u003c\/p\u003e\u003ch2\u003eBuild Quality\u003c\/h2\u003e\u003cp\u003eJetPrime has engineered the JP ESR 009 specifically for the 2025-2026 Panigale V4\/S. The resistor module is fully encapsulated in a compound that resists splash water and isolates the internals from the continuous vibration of track use. Installation is a straight plug-and-play affair: connect to the original OEM socket, secure the unit, and the job is done. No cutting, no splicing, no visit to a dealer or tuning specialist.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis eliminator is developed and validated exclusively for the following model:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale V4 (2025-2026)\u003c\/li\u003e\n\u003cli\u003eDucati Panigale V4 S (2025-2026)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note: the JP ESR 009 is intended for track use only and is not approved for use on public roads.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eJetPrime\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eJP ESR 009\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eElectronic steering damper eliminator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSignal\u003c\/th\u003e\n\u003ctd\u003eOEM-specification electronic resistance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConnection\u003c\/th\u003e\n\u003ctd\u003ePlug and play — OEM connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProtection\u003c\/th\u003e\n\u003ctd\u003eSplash-proof, vibration-resistant encapsulation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment\u003c\/th\u003e\n\u003ctd\u003eDucati Panigale V4\/S (2025-2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntended Use\u003c\/th\u003e\n\u003ctd\u003eTrack use only — not road legal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53169017913610,"sku":"JP ESR 009","price":46.59,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JPESR0092.png?v=1780819225"},{"product_id":"jetprime-electronic-shock-absorber-eliminator-ducati-panigale-v4-s","title":"JetPrime Electronic Shock Absorber Eliminator for Ducati Panigale V4 S (2025-2026) – JP ESR 011","description":"\u003cp\u003eSwapping the OE Öhlins electronic shock absorber on your Ducati Panigale V4 S (2025-2026) for a fully mechanical race unit is one of the most effective track-day upgrades available — but without the right eliminator, the ECU will flag a permanent fault and light up the dashboard. The JetPrime JP ESR 011 solves that cleanly, electrically simulating the original electronic shock absorber so the bike's control unit sees exactly what it expects, leaving you free to run the mechanical suspension of your choice without error codes or warning lights.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnables a clean swap from the OE electronic Öhlins shock absorber to any fully mechanical rear shock, with no ECU intervention required\u003c\/li\u003e\n\u003cli\u003eSuppresses fault codes and dashboard warning lights that would otherwise appear when the electronic suspension signal is removed\u003c\/li\u003e\n\u003cli\u003eBuilt to OEM resistance specification — the ECU reads the eliminator as the original shock absorber at all times\u003c\/li\u003e\n\u003cli\u003eVibration-resistant and splash-water-protected encapsulation suited to demanding track environments\u003c\/li\u003e\n\u003cli\u003ePlug-and-play installation: connects directly to the factory connector, no wiring modifications needed\u003c\/li\u003e\n\u003cli\u003eReduces weight and simplifies maintenance by eliminating the electronic actuator and its associated wiring\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eRace Application\u003c\/h2\u003e\u003cp\u003eSerious track builds on the Panigale V4 S increasingly favour high-end fully mechanical shock absorbers, which offer more precise adjustment and a simpler, lighter setup than the factory electronic system. The challenge has always been the ECU: remove the Öhlins electronic unit and the bike will detect an open circuit, triggering a continuous fault. The JP ESR 011 eliminates that problem by presenting the correct electrical resistance to the ECU, keeping the system satisfied while you run whatever mechanical unit best suits your damping requirements. The result is a clean, professional conversion with no compromises on electronics behaviour.\u003c\/p\u003e\u003ch2\u003eConstruction\u003c\/h2\u003e\u003cp\u003eJetPrime engineered the JP ESR 011 specifically for the 2025-2026 Ducati Panigale V4 S — it is not a generic resistor but a purpose-built unit matched to the OEM electrical specification of the factory Öhlins semi-active system. The sealed, vibration-resistant housing ensures reliable signal simulation even under the sustained heat and vibration loads of track use, where generic solutions often fail.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThe JetPrime JP ESR 011 is designed exclusively for the following application:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale V4 S — model years 2025 and 2026\u003c\/li\u003e\n\u003cli\u003eReplaces the OE (original equipment) Öhlins electronic rear shock absorber connection\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNote: this product is intended for motorsport and track use only. It is not approved for road use.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eJetPrime\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eJP ESR 011\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eElectronic shock absorber eliminator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment\u003c\/th\u003e\n\u003ctd\u003eDucati Panigale V4 S (2025-2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOE Shock Absorber Replaced\u003c\/th\u003e\n\u003ctd\u003eÖhlins electronic semi-active rear shock absorber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eElectrical Specification\u003c\/th\u003e\n\u003ctd\u003eOEM-matched resistance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHousing\u003c\/th\u003e\n\u003ctd\u003eVibration-resistant, splash-water-protected sealed enclosure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003ePlug-and-play, direct OEM connector fitment, no ECU modification required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntended Use\u003c\/th\u003e\n\u003ctd\u003eMotorsport \/ track use only — not road legal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53169018044682,"sku":"JP ESR 011","price":88.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JPESR011.png?v=1780819235"},{"product_id":"jetprime-licence-plate-light-eliminator-ducati-panigale-v4-s-r","title":"JetPrime Licence Plate Light Eliminator for Ducati Panigale V4\/S\/R (2025-2026) – JP ES 016","description":"\u003cp\u003eStripping the tail section from your Ducati Panigale V4\/S\/R for track duty is one of the cleanest upgrades you can make — but only if the ECU never notices the change. The JetPrime JP ES 016 licence plate light eliminator plugs directly into the OEM connector, simulating the electrical load of the original unit so the ECU registers no fault, no warning light, and no stored error code.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eElectronically simulates the original licence plate light, keeping the ECU completely satisfied after tail removal\u003c\/li\u003e\n\u003cli\u003ePrevents dashboard fault codes and warning messages caused by missing rear lighting components\u003c\/li\u003e\n\u003cli\u003ePlug and play installation — connects directly to the stock connector, no ECU programming required\u003c\/li\u003e\n\u003cli\u003eCompact, vibration-resistant construction with splash-proof encapsulation for reliable circuit operation\u003c\/li\u003e\n\u003cli\u003eEnsures the remainder of the bike's lighting circuit continues to function without interference\u003c\/li\u003e\n\u003cli\u003ePurpose-built for the Ducati Panigale V4\/S\/R model years 2025 and 2026\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhy You Need a Licence Plate Light Eliminator\u003c\/h2\u003e\u003cp\u003eRacing tail conversions and lightweight track rear ends typically delete the number plate bracket, tail light cluster, and licence plate illumination in one go. Without an eliminator in place, the Panigale's ECU detects an open circuit at the licence plate light feed and immediately flags a fault. That stored error code can trigger dashboard warnings and, on some configurations, interfere with other electrical functions. The JetPrime JP ES 016 inserts an electronic resistor matched to OEM specification into the original harness, so the ECU sees the correct load and continues to operate as intended.\u003c\/p\u003e\u003ch2\u003eBuild Quality and Installation\u003c\/h2\u003e\u003cp\u003eJetPrime has engineered the JP ES 016 around an electronic resistor built to OEM load specifications, encapsulated in a compact, sealed housing that resists vibration and splash ingress — both essential qualities on a track motorcycle subjected to kerb impacts and variable weather. The single-connector plug-and-play design means installation takes minutes rather than hours: locate the licence plate light connector in the tail loom, unplug the original unit, plug in the JP ES 016, and the job is done. No software, no bench time, no ECU intervention of any kind.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThe JetPrime JP ES 016 is developed specifically for the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale V4 (2025–2026)\u003c\/li\u003e\n\u003cli\u003eDucati Panigale V4 S (2025–2026)\u003c\/li\u003e\n\u003cli\u003eDucati Panigale V4 R (2025–2026)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFor track use only. Not approved for use on public roads.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eJetPrime\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eJP ES 016\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eLicence plate light eliminator \/ load simulator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnection type\u003c\/td\u003e\n\u003ctd\u003ePlug and play — OEM connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResistor specification\u003c\/td\u003e\n\u003ctd\u003eElectronic resistor to OEM specification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing\u003c\/td\u003e\n\u003ctd\u003eCompact, vibration-resistant, splash-proof encapsulated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eDucati Panigale V4\/S\/R (2025–2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntended use\u003c\/td\u003e\n\u003ctd\u003eTrack \/ racing use only — not road-legal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53169018175754,"sku":"JP ES 016","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JPES016.png?v=1780819239"},{"product_id":"jetprime-sls-solenoid-eliminator-ducati-panigale-v4-s-r","title":"JetPrime SLS Solenoid Eliminator for Ducati Panigale V4\/S\/R (2025-2026) – JP ES 007","description":"\u003cp\u003eWhen you strip the secondary air injection system from your Ducati Panigale V4\/S\/R for track use, the last thing you want is a cockpit full of ECU warnings undermining your race prep. The JetPrime SLS Solenoid Eliminator JP ES 007 solves exactly that problem: it electronically simulates the original SLS solenoid signal so the ECU sees no fault, no warning light, and no disruption — leaving you free to focus entirely on lap times.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eElectronically simulates the OEM SLS solenoid, preventing ECU fault codes and dashboard warnings after SLS\/PAIR system removal\u003c\/li\u003e\n\u003cli\u003ePlug and play installation — connects directly to the original factory connector with no wiring modifications required\u003c\/li\u003e\n\u003cli\u003eEliminates backfiring and exhaust popping caused by the secondary air injection system when running a racing exhaust\u003c\/li\u003e\n\u003cli\u003eFrees up space in the engine bay and reduces overall weight, benefiting track-focused builds\u003c\/li\u003e\n\u003cli\u003eNo ECU software remapping or flashing required — the eliminator handles everything at the hardware level\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTrack-Ready Engineering\u003c\/h2\u003e\u003cp\u003eRunning a full racing exhaust system on the Panigale V4\/S\/R without addressing the SLS\/PAIR solenoid is a compromise no serious track rider should accept. The secondary air injection system introduces unwanted combustion gases and is a well-known source of detonation noise and misfires under hard deceleration. Removing it cleans up throttle response and allows a racing slip-on or full system to perform exactly as intended.\u003c\/p\u003e\u003cp\u003eThe JetPrime JP ES 007 is built to OEM resistance specification, so the ECU receives precisely the signal it expects from the original solenoid. The unit is splash-water protected and vibration-proof encapsulated — essential qualities given the extreme thermal and mechanical environment of a race-prepared V4. There is no need to touch the ECU software at any point during installation.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis eliminator is developed specifically for the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale V4 (2025-2026)\u003c\/li\u003e\n\u003cli\u003eDucati Panigale V4 S (2025-2026)\u003c\/li\u003e\n\u003cli\u003eDucati Panigale V4 R (2025-2026)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eImportant Notice\u003c\/h2\u003e\u003cp\u003eThis product is intended for racing and closed-circuit use only. It is not approved for use on public roads.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: JetPrime\u003c\/li\u003e\n\u003cli\u003ePart number: JP ES 007\u003c\/li\u003e\n\u003cli\u003eFunction: SLS\/PAIR solenoid eliminator\u003c\/li\u003e\n\u003cli\u003eResistance: OEM specification\u003c\/li\u003e\n\u003cli\u003eInstallation: Plug and play, direct OEM connector\u003c\/li\u003e\n\u003cli\u003eProtection: Splash-water resistant, vibration-proof encapsulated\u003c\/li\u003e\n\u003cli\u003eFitment: Ducati Panigale V4\/S\/R (2025-2026)\u003c\/li\u003e\n\u003cli\u003eIntended use: Racing and closed-circuit track use only\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53169018503434,"sku":"JP ES 007","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ES_007_c1f90b88-6626-4d60-96e2-0dc9b3f0974b.png?v=1780819243"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/collections\/ABSRemovRSv4_bfc0dd15-6623-47ad-b98c-de37a3ebcc32.png?v=1785222889","url":"https:\/\/inter-pace.com\/en-bs\/collections\/eliminators.oembed?page=3","provider":"Inter-Pace","version":"1.0","type":"link"}