{"product_id":"ohlins-shock-spring-48-n-mm-150-mm-57-mm-01093-08","title":"Öhlins Shock Spring 48 N\/mm \/ 150 mm \/ Ø 57 mm – 01093-08","description":"\u003cp\u003eÖhlins part number 01093-08 is a shock absorber spring rated at 48 N\/mm, 150 mm long with a 57 mm inner diameter. Adding a pillion or luggage changes the load enough that the standard rate stops working.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePowder-coated yellow\u003c\/li\u003e\n\u003cli\u003eInner diameter 57 mm\u003c\/li\u003e\n\u003cli\u003eFree length 150 mm\u003c\/li\u003e\n\u003cli\u003e88 mm of usable stroke\u003c\/li\u003e\n\u003cli\u003eStraight-wound, constant rate\u003c\/li\u003e\n\u003cli\u003eÖhlins part number 01093-08\u003c\/li\u003e\n\u003cli\u003eMeasured spring rate 48 N\/mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eManufacture and Tolerance\u003c\/h2\u003e\u003cp\u003eÖhlins sets a baseline for each part number on the machine it was developed on, so it works before anything is adjusted. The Öhlins part number is stamped on the unit, so its specification can be looked up years later. Production is Öhlins' own in Sweden, and the tolerance on the rate is what separates these from a generic replacement.\u003c\/p\u003e\u003ch2\u003eSize and Rate\u003c\/h2\u003e\u003cp\u003eFree length 150 mm, inner diameter 57 mm, rate 48 N\/mm — those three figures define the part completely.\u003c\/p\u003e\u003ch2\u003eChoosing 48 N\/mm\u003c\/h2\u003e\u003cp\u003eThis is where most riders of average weight land once static sag has been set to specification. Rates here suit a solo rider of typical weight on a road-going machine. A mid rate balances support under braking against compliance over the surface, which is why it is the usual starting point. Ride quality on the road is decided by rate first and damping second.\u003c\/p\u003e\u003ch2\u003eRate and the Linkage\u003c\/h2\u003e\u003cp\u003eRear spring rate sets ride height and static sag, and those two decide the chassis attitude before any damping click matters. On a linkage-equipped machine the wheel moves several millimetres for every millimetre the damper moves, and the spring rate has to account for that ratio. The rear spring carries the rider, the pillion and the luggage; the front carries only part of it.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eAsk us with the machine and rider weight and we will tell you which rate in this size to take. This spring is chosen by its dimensions rather than by motorcycle model: check inner diameter, free length and rate against the fork it is going into. A workshop will pick this spring from its dimensions and the rider's weight, not from a fitment table.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eRate and preload are separate adjustments: get the rate right first, then set sag with preload. The springs come powder-coated and need no preparation before they go in. Springs are supplied ready to fit; no cutting, grinding or packing is needed.\u003c\/p\u003e\u003ch2\u003eRoad Approval\u003c\/h2\u003e\u003cp\u003eRoad approval: none is issued for springs as such — they replace an existing component of the same function. Any model-specific approval is listed under Applications.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eÖhlins recommends that its suspension is fitted by an authorised service centre. We are one, and we do the work here: installation, servicing and a proper setup. Ask us and we will include it with the order.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 01093-08\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSpring Rate:\u003c\/em\u003e 48 N\/mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFree Length:\u003c\/em\u003e 150 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eInner Diameter:\u003c\/em\u003e 57 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eStroke:\u003c\/em\u003e 88 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eConstruction:\u003c\/em\u003e Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Powder-coated yellow\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53645336903946,"sku":"01093-08","price":78.56,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/RearOhlinsSpring_d0342d0b-93d2-485d-a4ab-169dc92b102d.png?v=1788866653","url":"https:\/\/inter-pace.com\/en-bg\/products\/ohlins-shock-spring-48-n-mm-150-mm-57-mm-01093-08","provider":"Inter-Pace","version":"1.0","type":"link"}