Öhlins NIX 30 Cartridge Kit FGK 202 Fork Upgrade for Yamaha YZF-R6 RJ15 (2008–2016)

When lap times matter, the factory fork internals on the Yamaha YZF-R6 RJ15 become the first obstacle between you and the limit. The Öhlins NIX 30 Cartridge Kit FGK 202 replaces those internals with a purpose-engineered 30 mm cartridge system, delivering the precise, consistent damping that transforms the R6 from a capable supersport into a genuinely track-focused weapon — without sacrificing road usability.

Key Features

• 30 mm cartridge design provides a significant gain in fork performance over the standard internals, with improved oil flow control and damping consistency across the full stroke.
• Compression damping and its adjuster sit in the left fork leg, while rebound damping and its adjuster occupy the right leg — a clean, logical separation that makes trackside setup changes fast and intuitive.
• Preload adjustment is accessible directly at the fork cap, so spring setup can be dialled in without removing the forks or disturbing geometry.
• Part number FGK 202 is engineered specifically for the Yamaha YZF-R6 RJ15 (2008–2016) — a direct replacement with no fabrication or adaption required.
• Holds ABE type approval for Germany, confirming road-legal status in addition to its track credentials.
• Installation manual included in the box; Öhlins recommends fitment by an authorised Öhlins Service Centre for optimal results.

Performance on Track and Road

The NIX 30 system addresses the core weakness of conventional cartridge forks: imprecise, inconsistent damping at the speeds and loads generated during hard riding. The 30 mm cartridge increases the internal piston area relative to the standard internals, which translates directly into better control over fork velocity — both under heavy braking into a corner and during the initial dive phase. On circuit, this means a more communicative front end and a stable platform from which to drive hard on corner exit. On demanding public roads, the same qualities reduce fatigue and inspire confidence.

Engineering Detail

Springs are not included with the FGK 202 — they must be ordered separately from the Öhlins 08790 series. This deliberate approach allows the correct spring rate to be selected for the rider's weight and intended use, rather than fitting a generic compromise. Öhlins' range of matched springs means the complete system can be tuned as a unit, rather than adapted around a factory spring that was never intended to work with aftermarket damping.

Fitment & Compatibility

The Öhlins NIX 30 Cartridge Kit FGK 202 is a direct fitment for the following:

• Yamaha YZF-R6 RJ15 — model years 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016

If you are unsure whether this kit suits your specific build or homologation requirements, contact the Inter-Pace team before ordering.

Specifications