{"title":"Pinlock","description":"\u003cp\u003eA Pinlock insert is the single most effective anti-fog solution in motorcycling — a moisture-absorbing lens that seals against the inside of your visor and keeps it clear from the first cold morning to the last night ride. Genuine inserts here for Shoei, Nexx, AGV, KYT and MT Helmets visors.\u003c\/p\u003e\u003cp\u003ePinlock inserts are visor-specific: the pins on your visor decide which insert fits, so match the exact visor model from the listing. Most race and touring visors ship Pinlock-ready; the insert grades (30\/70\/120) describe increasing anti-fog performance, with 120 the standard for serious all-weather riding.\u003c\/p\u003e","products":[{"product_id":"kyt-pinlock-70-max-vision-anti-fog-visor-insert-tt-revo-helmets","title":"KYT Pinlock 70 Max Vision Anti-Fog Visor Insert for TT-Revo Helmets","description":"\u003cp\u003eEngineered from moisture-absorbing specialist polymer and sealed with a precision silicone bead, the KYT Pinlock 70 Max Vision visor insert delivers uncompromised optical clarity for TT-Revo helmet owners — whatever the weather throws at you.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePinlock 70 Max Vision lens constructed from high-grade moisture-absorbing specialist plastic that actively draws condensation away from the visor surface\u003c\/li\u003e\n\u003cli\u003eIntegrated silicone seal creates a fully enclosed dual-visor system, replicating the insulating principle of double-glazing to prevent fogging at source\u003c\/li\u003e\n\u003cli\u003eEngineered specifically for KYT TT-Revo helmets, ensuring a precise, rattle-free fit with no light ingress around the seal\u003c\/li\u003e\n\u003cli\u003eEffective in cold, wet and mixed conditions — a worldwide benchmark for rider safety and visor clarity\u003c\/li\u003e\n\u003cli\u003eSimple push-fit installation with no tools required, making lens swaps straightforward at the trackside or in the garage\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePremium Construction\u003c\/h2\u003e\u003cp\u003eWhere lesser anti-fog films rely on surface coatings that degrade with cleaning, the Pinlock 70 system uses a physically separate moisture-absorbing polymer lens held firmly against the main visor by a continuous silicone gasket. This gasket forms an airtight pocket between the two surfaces — the same thermopane principle used in architectural glazing — so warm, humid breath never reaches the cold outer visor and fogging is eliminated rather than merely delayed. The specialist polymer retains its anti-fog properties wash after wash, season after season, making it a genuinely long-term upgrade rather than a consumable fix.\u003c\/p\u003e\u003ch2\u003eOn the Road and at the Track\u003c\/h2\u003e\u003cp\u003eDawn runs, late-autumn commutes, pit-lane warm-ups on a cold circuit morning — these are the conditions that expose a visor's shortcomings and where the Pinlock 70 Max Vision earns its reputation. Riders across club sport and everyday road use regard it as standard equipment rather than an optional extra, precisely because it performs consistently without rider intervention. There is no treatment to reapply, no film to peel, and no compromise on optical quality: the lens is fully transparent and introduces no distortion to your field of view.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis insert is designed and manufactured specifically for the KYT TT-Revo helmet. Please confirm your helmet model before ordering to ensure pin alignment and lens geometry are correct. It is not compatible with other KYT helmet models or third-party visors.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart number: YANFP000\u003c\/li\u003e\n\u003cli\u003eStandard: Pinlock 70 Max Vision\u003c\/li\u003e\n\u003cli\u003eMaterial: moisture-absorbing specialist polymer with silicone seal\u003c\/li\u003e\n\u003cli\u003eFitment: KYT TT-Revo helmets\u003c\/li\u003e\n\u003cli\u003eScope of delivery: 1x Pinlock visor insert\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KYT","offers":[{"title":"Default Title","offer_id":53168947888394,"sku":"YANFP000","price":27.35,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/PinLockK6.png?v=1780818504"},{"product_id":"agv-max-pinlock-120-anti-fog-visor-insert-k6-s-k6","title":"AGV Max Pinlock 120 Anti-Fog Visor Insert for K6 S \/ K6 – Race-Grade Clarity","description":"\u003cp\u003eWhen lap times are on the line or the weather closes in fast, a fogged visor is not an option. The AGV Max Pinlock 120 is the highest-specification lens in the Pinlock range — the same technology trusted at circuit level — engineered to keep your vision completely clear through rain, cold, humidity and rapid temperature swings. Designed exclusively for AGV K6 S and K6 helmets fitted with Pinlock-ready visors, this is the definitive anti-fog upgrade for riders who demand race-grade performance every time they click their visor shut.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePinlock 120 — the top tier of the Pinlock range, delivering the highest available anti-fog performance, as used in professional motorsport.\u003c\/li\u003e\n\u003cli\u003eMaxVision technology provides full-width coverage across the entire visor viewing area, with no reduction in peripheral clarity.\u003c\/li\u003e\n\u003cli\u003eMoisture-absorbing air-cushion seal creates an insulating layer between the lens and the outer visor, eliminating condensation at source.\u003c\/li\u003e\n\u003cli\u003eLong-lasting protection: with correct care the lens retains its anti-fog properties indefinitely, season after season.\u003c\/li\u003e\n\u003cli\u003eNo tools required — the lens clips onto the visor's fixing pins in seconds and seats itself precisely against the seal edge.\u003c\/li\u003e\n\u003cli\u003eOfficial AGV genuine accessory, guaranteed compatible with all AGV K6 S and K6 visors prepared for Pinlock fitment.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eRace Pedigree, Every-Ride Reliability\u003c\/h2\u003e\u003cp\u003eThe Pinlock 120 designation is not a marketing label — it reflects a measurable step up in anti-fog capacity over the standard 70 and 80 series. The lens material absorbs significantly more moisture per unit area, which is why the system is the preferred choice at track days and in professional racing where riders cannot pull over to wipe a visor clean. For road use, that same margin of performance translates directly into confidence: cold morning commutes, wet mountain passes, and long touring days in changeable weather all become effortless rather than stressful.\u003c\/p\u003e\u003ch2\u003eYear-Round Versatility\u003c\/h2\u003e\u003cp\u003eBecause the anti-fog action is passive — driven by the moisture-absorbing properties of the lens material rather than any active coating that can wear off — the AGV Max Pinlock 120 performs consistently in every season. It is equally effective in sub-zero winter temperatures as in the warm, humid conditions of summer rain. The lens is supplied as a standalone item without a visor, allowing you to equip your existing AGV K6 S or K6 visor immediately without replacing it.\u003c\/p\u003e\u003ch2\u003eInstallation Guide\u003c\/h2\u003e\u003cp\u003eFitting takes under a minute and requires no tools:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRemove the visor from the helmet.\u003c\/li\u003e\n\u003cli\u003eCarefully seat the Pinlock lens onto the fixing pins on the inner face of the visor.\u003c\/li\u003e\n\u003cli\u003eCheck that the sealing rim seats evenly and uniformly around the full perimeter.\u003c\/li\u003e\n\u003cli\u003eReattach the visor to the helmet — the system is ready to use immediately.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThe AGV Max Pinlock 120 is compatible with all AGV K6 S and K6 helmets whose visors are prepared for Pinlock fitment. Always confirm your visor carries the Pinlock-ready designation before ordering. The lens is not compatible with other AGV helmet lines or non-Pinlock-prepared visors.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eFeature\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct\u003c\/td\u003e\n\u003ctd\u003eAGV Max Pinlock 120\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003eAGV K6 S and K6 helmets (Pinlock-ready visor required)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eAnti-fog protection via moisture-absorbing air-cushion seal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTechnology\u003c\/td\u003e\n\u003ctd\u003eMaxVision — full viewing-area coverage\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDurability\u003c\/td\u003e\n\u003ctd\u003eLong-term anti-fog performance with correct care\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntended use\u003c\/td\u003e\n\u003ctd\u003eAll-year use — rain, cold and high humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eTool-free clip-in via visor fixing pins\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eScope of delivery\u003c\/td\u003e\n\u003ctd\u003e1x Max Pinlock 120 lens (visor not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer warranty\u003c\/td\u003e\n\u003ctd\u003e2 years on materials and function\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"AGV","offers":[{"title":"Default Title","offer_id":53168949526794,"sku":"SY-AGVMAXPI-9FE332-01","price":33.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/PinLockK6_2eec6588-273d-4a50-80f7-ba7730615c17.png?v=1780818512"},{"product_id":"shoei-pinlock-evo-clear-anti-fog-insert-x-spr-pro","title":"Shoei Pinlock Evo Clear Anti-Fog Insert for X-SPR PRO (CWR-F2 \/ CWR-F2R)","description":"\u003cp\u003eClear vision is a safety-critical matter, not a comfort nicety — and the Shoei Pinlock Evo delivers exactly that for X-SPR PRO and NXR2 riders. Engineered as a precision-fit anti-fog insert for Shoei CWR-F2 and CWR-F2R visors, it creates an insulating air pocket that eliminates condensation before it can form, keeping your view sharp through rain, cold, and rapid temperature swings.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePinlock Evo anti-fog technology: a peripheral silicone seal traps an insulating air layer between the insert and visor, preventing fogging even in extreme conditions\u003c\/li\u003e\n\u003cli\u003ePrecision fitment for Shoei CWR-F2 and CWR-F2R visors — click-fits onto the two prepared pins on the visor's inner face without modification\u003c\/li\u003e\n\u003cli\u003eClear optical quality maintains full colour accuracy and distortion-free vision at all times\u003c\/li\u003e\n\u003cli\u003eCompatible with the Shoei X-SPR PRO and NXR2 (fitted with CWR-F2 visor) helmets\u003c\/li\u003e\n\u003cli\u003eShoei genuine accessory — tuned specifically to the optical geometry of CWR-F2\/CWR-F2R visors for the tightest possible seal\u003c\/li\u003e\n\u003cli\u003eStraightforward installation with step-by-step instructions included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSafety and Why the Pinlock Evo Matters\u003c\/h2\u003e\u003cp\u003eA fogged visor is a genuine hazard. Whether you are commuting in autumn drizzle, pressing on through a cold track session, or caught in unexpected mist on a touring route, sudden condensation on the inside of your visor can reduce visibility to near zero in seconds. The Pinlock Evo system is the industry-standard defence against this, and Shoei's own Evo-grade insert represents the highest tier of anti-fog protection available for the X-SPR PRO platform.\u003c\/p\u003e\u003cp\u003eThe continuously running silicone gasket forms an airtight perimeter seal, isolating the trapped air layer from the ambient humidity inside your helmet. Unlike aftermarket alternatives, this insert is developed alongside the visor it fits, so the seal geometry is exact and the optical properties are matched. The result is maximum clarity through the full riding season — from cold morning commutes to late-evening motorway runs.\u003c\/p\u003e\u003ch2\u003eFitment and Installation\u003c\/h2\u003e\u003cp\u003eThe Pinlock Evo insert stretches onto the two Pinlock pins already fitted to the inside of your CWR-F2 or CWR-F2R visor. No tools are required. Full step-by-step installation instructions are included in the packaging. Correct fitting is essential for the seal to work properly — follow the guide carefully for best results.\u003c\/p\u003e\u003cp\u003ePlease note: for hygiene and safety reasons, Pinlock inserts cannot be returned or exchanged once the packaging has been opened.\u003c\/p\u003e\u003ch2\u003eIdeal For\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eShoei X-SPR PRO riders seeking all-weather visual clarity\u003c\/li\u003e\n\u003cli\u003eNXR2 owners running a CWR-F2 visor\u003c\/li\u003e\n\u003cli\u003eTrack day riders where visor fogging during cool-down laps is a recurring issue\u003c\/li\u003e\n\u003cli\u003eTouring riders and commuters who encounter varied weather conditions year-round\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eShoei X-SPR PRO\u003c\/li\u003e\n\u003cli\u003eShoei NXR2 (fitted with CWR-F2 visor)\u003c\/li\u003e\n\u003cli\u003eCompatible visor types: CWR-F2, CWR-F2R\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eShoei\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003ePinlock Evo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTint\u003c\/td\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible visor\u003c\/td\u003e\n\u003ctd\u003eCWR-F2 \/ CWR-F2R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible helmets\u003c\/td\u003e\n\u003ctd\u003eX-SPR PRO, NXR2 (with CWR-F2 visor)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeal type\u003c\/td\u003e\n\u003ctd\u003eContinuous peripheral silicone gasket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003ePin-mount, no tools required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCategory\u003c\/td\u003e\n\u003ctd\u003eGenuine Shoei accessory\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Shoei","offers":[{"title":"Default Title","offer_id":53168950771978,"sku":"17.39.100.0","price":29.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/pinlockxspro.png?v=1780818518"},{"product_id":"agv-pinlock-120-maxvision-anti-fog-insert-pista-gp-rr-visor","title":"AGV Pinlock 120 MaxVision Anti-Fog Insert for Pista GP RR Visor","description":"\u003cp\u003eRiding all day in changing conditions demands a visor insert that simply refuses to fog — the AGV Max Pinlock 120 MaxVision delivers exactly that comfort and clarity for Pista GP RR owners. By creating an insulating air cushion between the insert and your visor, it seals out the moisture that causes fogging on cold mornings, in rain, and during the rapid temperature swings that define long road rides and track days alike.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMaxVision wide-area coverage gives you an expansive, undistorted view across the critical sightline — exactly what all-day riding demands\u003c\/li\u003e\n\u003cli\u003ePinlock 120 performance sits at the top of the Pinlock range, delivering race-grade anti-fog protection for sport and track use\u003c\/li\u003e\n\u003cli\u003eTool-free fitment — simply clip the lens between the two Pinlock pins on your visor and it is ready to ride in seconds\u003c\/li\u003e\n\u003cli\u003eInsulating sealed air layer actively reduces fogging in cold weather, rain, high humidity and sudden temperature changes\u003c\/li\u003e\n\u003cli\u003eGenuine AGV accessory engineered specifically for the Pista GP RR visor with Pinlock pin preparation — a guaranteed fit, every time\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAll-Day Clarity on Road and Track\u003c\/h2\u003e\u003cp\u003eThe Pinlock 120 MaxVision insert is the insert AGV fits to its own factory race helmets for good reason. The expanded MaxVision lens area means the anti-fog zone tracks your natural field of vision rather than forcing you to look through a narrow strip. Whether you are commuting through a damp November morning or pushing through back-to-back sessions at a circuit, visual fatigue from condensation simply disappears from the equation.\u003c\/p\u003e\u003cp\u003ePlease note: this lens fits only Pinlock-prepared visors equipped with two locating pins. The visor itself is not included in the scope of delivery.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis insert is compatible with the following AGV visor:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eAGV Pista GP RR visor with Pinlock pin preparation\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eAlways verify that your visor carries the two Pinlock locating pins before ordering. Unprepared visors are not compatible.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eFeature\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct\u003c\/td\u003e\n\u003ctd\u003eAGV Max Pinlock 120\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eAnti-fog inner lens (Pinlock insert)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003eAGV Pista GP RR visor with Pinlock pins\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTechnology\u003c\/td\u003e\n\u003ctd\u003eMaxVision (extended field of vision)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eAnti-fog protection via insulating sealed air layer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eClip between the two Pinlock locating pins — no tools required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eScope of delivery\u003c\/td\u003e\n\u003ctd\u003e1x Pinlock 120 lens (visor not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntended use\u003c\/td\u003e\n\u003ctd\u003eRoad and track (subject to visor and setup)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"AGV","offers":[{"title":"Default Title","offer_id":53169035084042,"sku":"SY-AGVMAXPI-E283C7-01","price":33.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/PinLockK6_d0f7f088-6ed1-4441-910e-3518a592dcf1.png?v=1780819871"},{"product_id":"shoei-pinlock-evo-dks301-anti-fog-insert","title":"Shoei Pinlock EVO DKS301 Anti-Fog Insert – for CNS-1C \/ CNS-3 \/ CWR-1 \/ CW-1 Visors","description":"\u003cp\u003eFogging is the one visibility problem that gets worse exactly when you need to see most — cold mornings, rain, stop-and-go traffic. A PINLOCK EVO lens is the most effective answer to it, and it is a mechanical solution rather than a coating that wears off.\u003c\/p\u003e\u003ch2\u003eHow It Works\u003c\/h2\u003e\u003cp\u003eThe lens sits inside your visor, held by two eccentric pins, and a silicone bead around its edge seals it against the visor surface. That traps a thin, insulating layer of air between the two panes. Because the inner pane never gets as cold as the outer one, warm humid air from your breath has nothing cold to condense on. It is the same principle as double glazing, and it works within seconds rather than needing warm-up.\u003c\/p\u003e\u003ch2\u003eFitting\u003c\/h2\u003e\u003cp\u003eTake the visor off the helmet, flex it very slightly, and drop the lens onto the pins — the silicone seal does the rest. Fitting instructions are included. If you see condensation forming \u003cem\u003ebetween\u003c\/em\u003e the panes, the seal is not seated: take it out, clean both surfaces and refit.\u003c\/p\u003e\u003ch2\u003eCompatible Visor Types and Helmets\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eCheck your visor type before ordering.\u003c\/strong\u003e This lens fits visor type CW-1, CNS-1, CNS-1C, CNS-3, CNS-3C, CWR-1. Usable in the visors of: GT-Air, GT-Air II, GT-Air3, GT-Air3 SMART, Neotec, Neotec II, Neotec3, Qwest, Ryd, XR-1100, NXR, X-Spirit II, X-Spirit III.\u003c\/p\u003e\u003ch2\u003eCare\u003c\/h2\u003e\u003cp\u003eThe inner anti-fog surface is more delicate than the visor itself. Rinse it with lukewarm water and let it dry, or dab it gently — do not rub it dry with a cloth and do not use solvent-based cleaners, both of which will damage the coating. Handled properly, the lens lasts as long as the visor.\u003c\/p\u003e\u003ch2\u003ePlease Note\u003c\/h2\u003e\u003cp\u003eFor hygiene reasons Pinlock lenses are excluded from exchange and return once the packaging is opened.\u003c\/p\u003e","brand":"Shoei","offers":[{"title":"Default Title","offer_id":53398210347274,"sku":"17.28.000.0","price":29.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/Pinlockshoei.png?v=1784545371"},{"product_id":"shoei-pinlock-evo-dks056-anti-fog-insert","title":"Shoei Pinlock EVO DKS056 Anti-Fog Insert – for CPB-1V \/ CPB-1 Visors (Glamster)","description":"\u003cp\u003eFogging is the one visibility problem that gets worse exactly when you need to see most — cold mornings, rain, stop-and-go traffic. A PINLOCK EVO lens is the most effective answer to it, and it is a mechanical solution rather than a coating that wears off.\u003c\/p\u003e\u003ch2\u003eHow It Works\u003c\/h2\u003e\u003cp\u003eThe lens sits inside your visor, held by two eccentric pins, and a silicone bead around its edge seals it against the visor surface. That traps a thin, insulating layer of air between the two panes. Because the inner pane never gets as cold as the outer one, warm humid air from your breath has nothing cold to condense on. It is the same principle as double glazing, and it works within seconds rather than needing warm-up.\u003c\/p\u003e\u003ch2\u003eFitting\u003c\/h2\u003e\u003cp\u003eTake the visor off the helmet, flex it very slightly, and drop the lens onto the pins — the silicone seal does the rest. Fitting instructions are included. If you see condensation forming \u003cem\u003ebetween\u003c\/em\u003e the panes, the seal is not seated: take it out, clean both surfaces and refit.\u003c\/p\u003e\u003ch2\u003eCompatible Visor Types and Helmets\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eCheck your visor type before ordering.\u003c\/strong\u003e This lens fits visor type CPB-1, CPB-1V. Usable in the visors of: Glamster, Glamster06.\u003c\/p\u003e\u003ch2\u003eCare\u003c\/h2\u003e\u003cp\u003eThe inner anti-fog surface is more delicate than the visor itself. Rinse it with lukewarm water and let it dry, or dab it gently — do not rub it dry with a cloth and do not use solvent-based cleaners, both of which will damage the coating. Handled properly, the lens lasts as long as the visor.\u003c\/p\u003e\u003ch2\u003ePlease Note\u003c\/h2\u003e\u003cp\u003eFor hygiene reasons Pinlock lenses are excluded from exchange and return once the packaging is opened.\u003c\/p\u003e","brand":"Shoei","offers":[{"title":"Default Title","offer_id":53398210380042,"sku":"17.30.000.0","price":29.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/Pinlockshoei.png?v=1784545371"},{"product_id":"shoei-pinlock-evo-dks302-anti-fog-insert","title":"Shoei Pinlock EVO DKS302 Anti-Fog Insert – for CNS-2 Visors (Hornet ADV)","description":"\u003cp\u003eFogging is the one visibility problem that gets worse exactly when you need to see most — cold mornings, rain, stop-and-go traffic. A PINLOCK EVO lens is the most effective answer to it, and it is a mechanical solution rather than a coating that wears off.\u003c\/p\u003e\u003ch2\u003eHow It Works\u003c\/h2\u003e\u003cp\u003eThe lens sits inside your visor, held by two eccentric pins, and a silicone bead around its edge seals it against the visor surface. That traps a thin, insulating layer of air between the two panes. Because the inner pane never gets as cold as the outer one, warm humid air from your breath has nothing cold to condense on. It is the same principle as double glazing, and it works within seconds rather than needing warm-up.\u003c\/p\u003e\u003ch2\u003eFitting\u003c\/h2\u003e\u003cp\u003eTake the visor off the helmet, flex it very slightly, and drop the lens onto the pins — the silicone seal does the rest. Fitting instructions are included. If you see condensation forming \u003cem\u003ebetween\u003c\/em\u003e the panes, the seal is not seated: take it out, clean both surfaces and refit.\u003c\/p\u003e\u003ch2\u003eCompatible Visor Types and Helmets\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eCheck your visor type before ordering.\u003c\/strong\u003e This lens fits visor type CNS-2. Usable in the visors of: Hornet ADV 06, Hornet ADV.\u003c\/p\u003e\u003ch2\u003eCare\u003c\/h2\u003e\u003cp\u003eThe inner anti-fog surface is more delicate than the visor itself. Rinse it with lukewarm water and let it dry, or dab it gently — do not rub it dry with a cloth and do not use solvent-based cleaners, both of which will damage the coating. Handled properly, the lens lasts as long as the visor.\u003c\/p\u003e\u003ch2\u003ePlease Note\u003c\/h2\u003e\u003cp\u003eFor hygiene reasons Pinlock lenses are excluded from exchange and return once the packaging is opened.\u003c\/p\u003e","brand":"Shoei","offers":[{"title":"Default Title","offer_id":53401335824650,"sku":"17.29.000.0","price":32.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/PinlockHornet.png?v=1784559179"},{"product_id":"shoei-pinlock-evo-dks105-anti-fog-insert","title":"Shoei Pinlock EVO DKS105 Anti-Fog Insert – for CJ-2 \/ CJ-2 SP Visors","description":"\u003cp\u003eFogging is the one visibility problem that gets worse exactly when you need to see most — cold mornings, rain, stop-and-go traffic. A PINLOCK EVO lens is the most effective answer to it, and it is a mechanical solution rather than a coating that wears off.\u003c\/p\u003e\u003ch2\u003eHow It Works\u003c\/h2\u003e\u003cp\u003eThe lens sits inside your visor, held by two eccentric pins, and a silicone bead around its edge seals it against the visor surface. That traps a thin, insulating layer of air between the two panes. Because the inner pane never gets as cold as the outer one, warm humid air from your breath has nothing cold to condense on. It is the same principle as double glazing, and it works within seconds rather than needing warm-up.\u003c\/p\u003e\u003ch2\u003eFitting\u003c\/h2\u003e\u003cp\u003eTake the visor off the helmet, flex it very slightly, and drop the lens onto the pins — the silicone seal does the rest. Fitting instructions are included. If you see condensation forming \u003cem\u003ebetween\u003c\/em\u003e the panes, the seal is not seated: take it out, clean both surfaces and refit.\u003c\/p\u003e\u003ch2\u003eCompatible Visor Types and Helmets\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eCheck your visor type before ordering.\u003c\/strong\u003e This lens fits visor type CJ-2, CJ-2 SP. Usable in the visors of: J-Cruise 3, J-Cruise II, J-Cruise.\u003c\/p\u003e\u003ch2\u003eCare\u003c\/h2\u003e\u003cp\u003eThe inner anti-fog surface is more delicate than the visor itself. Rinse it with lukewarm water and let it dry, or dab it gently — do not rub it dry with a cloth and do not use solvent-based cleaners, both of which will damage the coating. Handled properly, the lens lasts as long as the visor.\u003c\/p\u003e\u003ch2\u003ePlease Note\u003c\/h2\u003e\u003cp\u003eFor hygiene reasons Pinlock lenses are excluded from exchange and return once the packaging is opened.\u003c\/p\u003e","brand":"Shoei","offers":[{"title":"Default Title","offer_id":53401659638026,"sku":"17.32.000.0","price":29.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/PinlockHornet.png?v=1784559179"},{"product_id":"mt-helmets-pinlock-dks435-max-vision-clear","title":"MT-Helmets Thunder 4 R SV \/ Braker SV \/ Stinger 2 Pinlock DKS435 Max Vision Anti-Fog Insert – Clear (MT-V-28B \/ 28C)","description":"\u003cp\u003eA silicone seal between the DKS435 Max Vision lens and your visor traps an insulating layer of air that stops the visor fogging — the single most effective fix for misting in cold or wet weather. The Max Vision lens is cut for the widest possible field of view.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCheck your visor type before ordering.\u003c\/strong\u003e This lens fits \u003cstrong\u003eMT-V-28B and MT-V-28C\u003c\/strong\u003e visors, as used on the MT Thunder 4 R SV. Fitting instructions are included.\u003c\/p\u003e\u003ch2\u003ePlease Note\u003c\/h2\u003e\u003cp\u003eFor hygiene reasons, Pinlock lenses are excluded from exchange and return once opened.\u003c\/p\u003e","brand":"MT-Helmets","offers":[{"title":"Default Title","offer_id":53406305485066,"sku":"182809970","price":24.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/up_PinlockMT.png?v=1784643556"},{"product_id":"mt-helmets-pinlock-dks479-max-vision-clear","title":"MT-Helmets Jarama SV Pinlock DKS479 Max Vision Anti-Fog Insert – Clear (MT-V-32)","description":"\u003cp\u003eA silicone seal between the DKS479 Max Vision lens and your MT-V-32 visor traps an insulating layer of air that stops the visor fogging — the most effective fix for misting in cold or wet weather. Cut for the widest possible field of view.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis lens fits the MT-V-32 visor\u003c\/strong\u003e as used on the MT Jarama SV. Fitting instructions included.\u003c\/p\u003e\u003ch2\u003ePlease Note\u003c\/h2\u003e\u003cp\u003eFor hygiene reasons, Pinlock lenses are excluded from exchange and return once opened.\u003c\/p\u003e","brand":"MT-Helmets","offers":[{"title":"Default Title","offer_id":53406603182346,"sku":"182800070","price":27.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/up_PinlockMT_71c1f74e-4138-4a30-ad0d-bda049d3fe28.png?v=1784643558"},{"product_id":"mt-helmets-pinlock-dks209-clear","title":"MT-Helmets Targo S Pinlock DKS209 Anti-Fog Insert – Clear (MT-V-14 \/ 14B)","description":"\u003cp\u003eA silicone seal between the DKS209 lens and your MT-V-14B visor traps an insulating layer of air that stops the visor fogging — the most effective fix for misting in cold or wet weather.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis lens fits the MT-V-14 \/ MT-V-14B visor\u003c\/strong\u003e as used on the MT Targo S. Fitting instructions included.\u003c\/p\u003e\u003ch2\u003ePlease Note\u003c\/h2\u003e\u003cp\u003eFor hygiene reasons, Pinlock lenses are excluded from exchange and return once opened.\u003c\/p\u003e","brand":"MT-Helmets","offers":[{"title":"Default Title","offer_id":53406862049546,"sku":"182809929","price":27.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/up_PinlockMT_98325e88-083a-4c99-992b-48fde03e689b.png?v=1784643559"},{"product_id":"mt-helmets-pinlock-dks512-clear","title":"MT-Helmets Atom 2 SV Pinlock DKS512 Max Vision Anti-Fog Insert – Clear (MT-V-35)","description":"\u003cp\u003eA silicone seal between the DKS512 Max Vision lens and your MT-V-35 visor traps an insulating layer of air that stops the visor fogging — the most effective fix for misting in cold or wet weather.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis lens fits the MT-V-35 visor\u003c\/strong\u003e as used on the MT Atom 2 SV (a DKS512 is already included with the helmet). Fitting instructions included.\u003c\/p\u003e\u003ch2\u003ePlease Note\u003c\/h2\u003e\u003cp\u003eFor hygiene reasons, Pinlock lenses are excluded from exchange and return once opened.\u003c\/p\u003e","brand":"MT-Helmets","offers":[{"title":"Default Title","offer_id":53407005442314,"sku":"1802100917","price":27.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/PinlockMT.png?v=1784644399"},{"product_id":"mt-helmets-pinlock-dks279-clear","title":"MT-Helmets Genesis R SV Pinlock DKS279 Max Vision Anti-Fog Insert – Clear (935 Visor)","description":"\u003cp\u003eA silicone seal between the DKS279 Max Vision lens and your 935 visor traps an insulating layer of air that stops the visor fogging — the most effective fix for misting in cold or wet weather.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis lens fits the 935 visor in its Max Vision Pinlock form\u003c\/strong\u003e, as used on the MT Genesis R SV. Fit it to a 935 visor labelled „Max Vision Pinlock\". Fitting instructions included.\u003c\/p\u003e\u003ch2\u003ePlease Note\u003c\/h2\u003e\u003cp\u003eFor hygiene reasons, Pinlock lenses are excluded from exchange and return once opened.\u003c\/p\u003e","brand":"MT-Helmets","offers":[{"title":"Default Title","offer_id":53407062196490,"sku":"1357000003","price":27.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/PinlockMT.png?v=1784644399"},{"product_id":"mt-helmets-pinlock-dks-623-track-sv","title":"MT Pinlock DKS 623 Max Vision Anti-Fog Insert – for Track SV","description":"\u003cp\u003eA genuine MT \u003cstrong\u003ePinlock DKS 623\u003c\/strong\u003e Max Vision anti-fog insert for the HS-12 visor as used on the Track SV. It's the most effective fog fix there is: a soft silicone bead seals the lens against the inside of your visor, trapping an insulating layer of air that stops warm, humid breath condensing on the screen — so your view stays clear in cold, wet and damp conditions when an untreated visor would mist over.\u003c\/p\u003e\u003cp\u003eThis is a \u003cstrong\u003eMax Vision\u003c\/strong\u003e lens, cut to the widest possible field of view so the anti-fog area reaches right to the edges of your sight line instead of leaving a foggy border. Fitting is quick and tool-free — flex the visor slightly, locate the lens on the visor's pins and release — with full instructions included.\u003c\/p\u003e\u003ch2\u003ePlease Note\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eFits the HS-12 visor (MT Track SV).\u003c\/strong\u003e For hygiene reasons, Pinlock lenses are excluded from exchange and return once opened.\u003c\/p\u003e","brand":"MT-Helmets","offers":[{"title":"Default Title","offer_id":53412261232906,"sku":"182809965","price":27.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/mt-helmets-pinlock-dks-623-track-sv.png?v=1784740859"},{"product_id":"nexx-pinlock-70-maxvision-y-series","title":"Nexx Pinlock 70 MaxVision Anti-Fog Insert – Clear (Y.100 \/ Y.100R \/ Y.TRAVL)","description":"\u003cp\u003eGenuine Nexx Pinlock® 70 anti-fog insert for the Nexx Y.100, Y.100R and Y.TRAVL. A soft silicone seal traps an insulating pocket of air between the insert and the visor, stopping condensation before it forms so your view stays clear in cold, wet and humid conditions. Lens code DKS175.\u003c\/p\u003e\n\u003ch2\u003eHighlights\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eGenuine Nexx Pinlock® anti-fog insert\u003c\/li\u003e\n\u003cli\u003eMaxVision — extra-wide fog-free coverage\u003c\/li\u003e\n\u003cli\u003eSilicone seal creates a dual-pane, fog-free zone\u003c\/li\u003e\n\u003cli\u003eClips onto the visor pins in seconds, tool-free\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePlease Note\u003c\/h2\u003e\u003cp\u003eFor hygiene reasons, Pinlock® lenses are excluded from returns once the sealed pack has been opened.\u003c\/p\u003e\n\u003ch2\u003eFit \u0026amp; Care\u003c\/h2\u003e\u003cp\u003eFits the Nexx Y.100 \/ Y.100R \/ Y.TRAVL. Wipe gently with a damp microfibre cloth; avoid solvents.\u003c\/p\u003e","brand":"Nexx","offers":[{"title":"Default Title","offer_id":53417452110090,"sku":"28032-00-101","price":32.28,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/PinLockK6_d0f7f088-6ed1-4441-910e-3518a592dcf1.png?v=1780819871"},{"product_id":"nexx-x-rally-pinlock-200","title":"Nexx Pinlock 200 XLT MaxVision Anti-Fog Insert – Clear (X.RALLY \/ X.WED3 \/ X.WST3)","description":"\u003cp\u003eGenuine Nexx Pinlock® 200 XLT anti-fog insert for the Nexx X.RALLY, X.WED3 and X.WST3. A soft silicone seal traps an insulating pocket of air between the insert and the visor, stopping condensation before it forms so your view stays clear in cold, wet and humid conditions.\u003c\/p\u003e\n\u003ch2\u003eHighlights\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eGenuine Nexx Pinlock® anti-fog insert\u003c\/li\u003e\n\u003cli\u003eMaxVision — extra-wide fog-free coverage\u003c\/li\u003e\n\u003cli\u003eSilicone seal creates a dual-pane, fog-free zone\u003c\/li\u003e\n\u003cli\u003eClips onto the visor pins in seconds, tool-free\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePlease Note\u003c\/h2\u003e\u003cp\u003eFor hygiene reasons, Pinlock® lenses are excluded from returns once the sealed pack has been opened.\u003c\/p\u003e\n\u003ch2\u003eFit \u0026amp; Care\u003c\/h2\u003e\u003cp\u003eFits the Nexx X.RALLY \/ X.WED3 \/ X.WST3. Wipe gently with a damp microfibre cloth; avoid solvents.\u003c\/p\u003e","brand":"Nexx","offers":[{"title":"Default Title","offer_id":53421245956362,"sku":"04XRL99PINTR30000","price":38.24,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/nexx-x-rally-pinlock-200.png?v=1784816947"},{"product_id":"nexx-x-rally-pinlock-120","title":"Nexx Pinlock 120 XLT MaxVision Anti-Fog Insert – Clear (X.RALLY \/ X.WED3 \/ X.WST3)","description":"\u003cp\u003eGenuine Nexx Pinlock® 120 XLT anti-fog insert for the Nexx X.RALLY, X.WED3 and X.WST3. A soft silicone seal traps an insulating pocket of air between the insert and the visor, stopping condensation before it forms so your view stays clear in cold, wet and humid conditions.\u003c\/p\u003e\n\u003ch2\u003eHighlights\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eGenuine Nexx Pinlock® anti-fog insert\u003c\/li\u003e\n\u003cli\u003eMaxVision — extra-wide fog-free coverage\u003c\/li\u003e\n\u003cli\u003eSilicone seal creates a dual-pane, fog-free zone\u003c\/li\u003e\n\u003cli\u003eClips onto the visor pins in seconds, tool-free\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePlease Note\u003c\/h2\u003e\u003cp\u003eFor hygiene reasons, Pinlock® lenses are excluded from returns once the sealed pack has been opened.\u003c\/p\u003e\n\u003ch2\u003eFit \u0026amp; Care\u003c\/h2\u003e\u003cp\u003eFits the Nexx X.RALLY \/ X.WED3 \/ X.WST3. Wipe gently with a damp microfibre cloth; avoid solvents.\u003c\/p\u003e","brand":"Nexx","offers":[{"title":"Default Title","offer_id":53421246382346,"sku":"04XE300PINTRR0000","price":31.45,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/nexx-x-rally-pinlock-120.png?v=1784816949"},{"product_id":"nexx-x-rally-pinlock-70","title":"Nexx Pinlock 70 MaxVision Anti-Fog Insert – Clear (X.RALLY \/ X.WED3 \/ X.WST3)","description":"\u003cp\u003eGenuine Nexx Pinlock® 70 anti-fog insert for the Nexx X.RALLY, X.WED3 and X.WST3. A soft silicone seal traps an insulating pocket of air between the insert and the visor, stopping condensation before it forms so your view stays clear in cold, wet and humid conditions. Lens code DKS553.\u003c\/p\u003e\n\u003ch2\u003eHighlights\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eGenuine Nexx Pinlock® anti-fog insert\u003c\/li\u003e\n\u003cli\u003eMaxVision — extra-wide fog-free coverage\u003c\/li\u003e\n\u003cli\u003eSilicone seal creates a dual-pane, fog-free zone\u003c\/li\u003e\n\u003cli\u003eClips onto the visor pins in seconds, tool-free\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePlease Note\u003c\/h2\u003e\u003cp\u003eFor hygiene reasons, Pinlock® lenses are excluded from returns once the sealed pack has been opened.\u003c\/p\u003e\n\u003ch2\u003eFit \u0026amp; Care\u003c\/h2\u003e\u003cp\u003eFits the Nexx X.RALLY \/ X.WED3 \/ X.WST3. Wipe gently with a damp microfibre cloth; avoid solvents.\u003c\/p\u003e","brand":"Nexx","offers":[{"title":"Default Title","offer_id":53421246546186,"sku":"8719323739109","price":25.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/nexx-x-rally-pinlock-70.png?v=1784816950"},{"product_id":"nexx-x-lifecountry-pinlock-120","title":"Nexx Pinlock 120 XLT MaxVision – Clear (X.TR \/ X.LIFECOUNTRY \/ X.LIFETOUR)","description":"\u003cp\u003eGenuine Nexx Pinlock® 120 XLT anti-fog insert for the Nexx X.TR, X.LIFECOUNTRY and X.LIFETOUR. A soft silicone seal traps an insulating pocket of air between the insert and the visor, stopping condensation before it forms so your view stays clear in cold, wet and humid conditions. Lens code DKS609.\u003c\/p\u003e\n\u003ch2\u003eHighlights\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eGenuine Nexx Pinlock® anti-fog insert\u003c\/li\u003e\n\u003cli\u003eMaxVision — extra-wide fog-free coverage\u003c\/li\u003e\n\u003cli\u003eSilicone seal creates a dual-pane, fog-free zone\u003c\/li\u003e\n\u003cli\u003eClips onto the visor pins in seconds, tool-free\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePlease Note\u003c\/h2\u003e\u003cp\u003eFor hygiene reasons, Pinlock® lenses are excluded from returns once the sealed pack has been opened.\u003c\/p\u003e\n\u003ch2\u003eFit \u0026amp; Care\u003c\/h2\u003e\u003cp\u003eFits the Nexx X.TR \/ X.LIFECOUNTRY \/ X.LIFETOUR. Wipe gently with a damp microfibre cloth; avoid solvents.\u003c\/p\u003e","brand":"Nexx","offers":[{"title":"Default Title","offer_id":53423664201994,"sku":"04XTR99PINTR10000","price":31.45,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/lc-pl120.png?v=1784880725"},{"product_id":"nexx-x-tr-pinlock-200","title":"Nexx Pinlock 200 MaxVision – Clear (X.TR \/ X.LIFECOUNTRY \/ X.LIFETOUR)","description":"\u003cp\u003eGenuine Nexx Pinlock® 200 anti-fog insert for the Nexx X.TR, X.LIFECOUNTRY and X.LIFETOUR. A soft silicone seal traps an insulating pocket of air between the insert and the visor, stopping condensation before it forms so your view stays clear in cold, wet and humid conditions. Lens code DKS609.\u003c\/p\u003e\n\u003ch2\u003eHighlights\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eGenuine Nexx Pinlock® anti-fog insert\u003c\/li\u003e\n\u003cli\u003eMaxVision — extra-wide fog-free coverage\u003c\/li\u003e\n\u003cli\u003eSilicone seal creates a dual-pane, fog-free zone\u003c\/li\u003e\n\u003cli\u003eClips onto the visor pins in seconds, tool-free\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePlease Note\u003c\/h2\u003e\u003cp\u003eFor hygiene reasons, Pinlock® lenses are excluded from returns once the sealed pack has been opened.\u003c\/p\u003e\n\u003ch2\u003eFit \u0026amp; Care\u003c\/h2\u003e\u003cp\u003eFits the Nexx X.TR \/ X.LIFECOUNTRY \/ X.LIFETOUR. Wipe gently with a damp microfibre cloth; avoid solvents.\u003c\/p\u003e","brand":"Nexx","offers":[{"title":"Default Title","offer_id":53423683928330,"sku":"XTR-PINLOCK-200","price":38.24,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/tr-pl200.png?v=1784880739"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/collections\/tr-pl200.png?v=1785222786","url":"https:\/\/inter-pace.com\/en-bf\/collections\/pinlock.oembed","provider":"Inter-Pace","version":"1.0","type":"link"}