{"product_id":"ohlins-shock-spring-115-n-mm-190-mm-46-mm-60293-41","title":"Öhlins Shock Spring 115 N\/mm \/ 190 mm \/ Ø 46 mm – 60293-41","description":"\u003cp\u003eÖhlins part number 60293-41 is a shock absorber spring rated at 115 N\/mm, 190 mm long with a 46 mm inner diameter. Rear spring rate sets ride height, static sag and how much of the damper's stroke is actually usable.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFree length 190 mm\u003c\/li\u003e\n\u003cli\u003e84 mm of usable stroke\u003c\/li\u003e\n\u003cli\u003eÖhlins part number 60293-41\u003c\/li\u003e\n\u003cli\u003eInner diameter 46 mm\u003c\/li\u003e\n\u003cli\u003ePowder-coated yellow\u003c\/li\u003e\n\u003cli\u003eMeasured spring rate 115 N\/mm\u003c\/li\u003e\n\u003cli\u003eStraight-wound, constant rate\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eManufacture and Tolerance\u003c\/h2\u003e\u003cp\u003eAnodising is hard-coat rather than decorative, which matters on a component exposed to road salt and stone chips. The wire is progressively wound where the application calls for it and straight where it does not. Every Öhlins dealer can re-valve the unit, because the shim stack is a documented, serviceable assembly.\u003c\/p\u003e\u003ch2\u003eDimensions\u003c\/h2\u003e\u003cp\u003eThe 46 mm bore and 190 mm length are the two figures that decide whether it physically fits; 115 N\/mm decides whether it suits the rider.\u003c\/p\u003e\u003ch2\u003eChoosing 115 N\/mm\u003c\/h2\u003e\u003cp\u003eA firm rate keeps the fork high in its stroke under braking, which preserves the geometry when the front is loaded hard. Firm rates trade some small-bump comfort for support — the right trade on a good surface at speed. If the suspension bottoms out or the geometry collapses under load, this is the direction to go. Ride quality on the road is decided by rate first and damping second.\u003c\/p\u003e\u003ch2\u003eWhat the Rear Spring Decides\u003c\/h2\u003e\u003cp\u003eRear spring rate sets ride height and static sag, and those two decide the chassis attitude before any damping click matters. Static sag at the rear sets the whole chassis attitude — get it wrong and the front geometry goes with it. Preload adjusts sag within a rate; it does not change the rate, and no amount of it will rescue a spring that is wrong.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eA spring is one of the few suspension parts that is genuinely interchangeable: same bore, same free length, and it goes in. Öhlins lists no fixed model here — the spring is defined by its measurements, and any fork with matching dimensions can take it. A workshop will pick this spring from its dimensions and the rider's weight, not from a fitment table.\u003c\/p\u003e\u003ch2\u003eWhat Fitting Involves\u003c\/h2\u003e\u003cp\u003eFitting is a fork-oil job: the legs come apart, the springs go in, the oil level is set to specification. Set static sag after fitting; the rate is only right if the sag figure lands where Öhlins specifies. Öhlins part numbers are stamped on the packaging rather than the spring, so keep the label with the setup notes.\u003c\/p\u003e\u003ch2\u003eRoad Approval\u003c\/h2\u003e\u003cp\u003eRoad approval: not applicable to the spring on its own. Öhlins issues approvals against complete suspension units, not individual springs.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eÖhlins suspension rewards careful fitting. We recommend having the work done by an authorised Öhlins service centre — and we are one ourselves: we fit, service and set up Öhlins components in house. If you would like us to handle the installation, just ask and we will quote it with the order.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 60293-41\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSpring Rate:\u003c\/em\u003e 115 N\/mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFree Length:\u003c\/em\u003e 190 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eInner Diameter:\u003c\/em\u003e 46 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eStroke:\u003c\/em\u003e 84 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eConstruction:\u003c\/em\u003e Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Powder-coated yellow\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53645421740298,"sku":"60293-41","price":184.0,"currency_code":"BBD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/RearOhlinsSpring_f14143c2-e0c4-48da-95d4-904c0a02f051.png?v=1788866951","url":"https:\/\/inter-pace.com\/en-bb\/products\/ohlins-shock-spring-115-n-mm-190-mm-46-mm-60293-41","provider":"Inter-Pace","version":"1.0","type":"link"}