{"product_id":"ohlins-shock-spring-19-n-mm-190-mm-46-mm-00281-72","title":"Öhlins Shock Spring 19 N\/mm \/ 190 mm \/ Ø 46 mm – 00281-72","description":"\u003cp\u003eÖhlins part number 00281-72 is a shock absorber spring rated at 19 N\/mm, 190 mm long with a 46 mm inner diameter. The damper can only control the spring it is given; the wrong rate makes every click a compromise.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eÖhlins part number 00281-72\u003c\/li\u003e\n\u003cli\u003e115 mm of usable stroke\u003c\/li\u003e\n\u003cli\u003ePowder-coated black\u003c\/li\u003e\n\u003cli\u003eStraight-wound, constant rate\u003c\/li\u003e\n\u003cli\u003eInner diameter 46 mm\u003c\/li\u003e\n\u003cli\u003eMeasured spring rate 19 N\/mm\u003c\/li\u003e\n\u003cli\u003eFree length 190 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eManufacture and Tolerance\u003c\/h2\u003e\u003cp\u003eEvery Öhlins dealer can re-valve the unit, because the shim stack is a documented, serviceable assembly. Rates are offered in defined steps, so a change can be made in one direction at a time. Materials read unremarkably on paper — aluminium, steel, nitrogen — and the difference lies in how precisely they are made.\u003c\/p\u003e\u003ch2\u003eDimensions\u003c\/h2\u003e\u003cp\u003eÖhlins holds the free length at 190 mm and the inner diameter at 46 mm across this rate range, so moving up or down a rate changes nothing about the installation.\u003c\/p\u003e\u003ch2\u003eChoosing 19 N\/mm\u003c\/h2\u003e\u003cp\u003eLighter riders usually end up a step or two below the factory rate once sag is measured properly. This is the end of the range where small-bump compliance matters more than resistance to diving. On a machine ridden solo and mostly on the road, softer is often the honest choice. Ride quality on the road is decided by rate first and damping second.\u003c\/p\u003e\u003ch2\u003eHow a Rear Spring Works\u003c\/h2\u003e\u003cp\u003eÖhlins supplies most of its shocks without a spring precisely so the rate can be matched to the rider rather than averaged. The damper can only control the spring it is given; the wrong rate makes every setting a compromise. A shock absorber spring carries the whole rear of the machine through a linkage that multiplies its rate several times over — which is why the number on the spring looks so much larger than a fork rate.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eRather than a model list, use the measurements: a fork that accepts this diameter and length is a candidate, and the rate follows from rider weight. If you are replacing a sagged original, measure its free length first — a tired spring often measures several millimetres short. Ask us with the machine and rider weight and we will tell you which rate in this size to take.\u003c\/p\u003e\u003ch2\u003eFitting\u003c\/h2\u003e\u003cp\u003eFork oil should be replaced at the same time — it is already out of the leg. A spring that is the correct length still needs the preload spacer checked, since installed length is what sets sag. Rate and preload are separate adjustments: get the rate right first, then set sag with preload.\u003c\/p\u003e\u003ch2\u003eRoad Approval\u003c\/h2\u003e\u003cp\u003eRoad approval: a spring is a like-for-like replacement of a wear part and carries no separate type approval. Where Öhlins states an approval for a particular motorcycle, it is named under Applications.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eThis is not a part to rush. Öhlins recommends installation by an authorised service centre, and we are an authorised Öhlins service centre — fitting, servicing and setup all happen here. Get in touch if you would like the work done with the order.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 00281-72\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSpring Rate:\u003c\/em\u003e 19 N\/mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFree Length:\u003c\/em\u003e 190 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eInner Diameter:\u003c\/em\u003e 46 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eStroke:\u003c\/em\u003e 115 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eConstruction:\u003c\/em\u003e Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Powder-coated black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53645320421642,"sku":"00281-72","price":125.0,"currency_code":"BAM","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/RearOhlinsSpring_a2005eb0-a7a8-4f55-80d1-55681b84dc18.png?v=1788866552","url":"https:\/\/inter-pace.com\/en-ba\/products\/ohlins-shock-spring-19-n-mm-190-mm-46-mm-00281-72","provider":"Inter-Pace","version":"1.0","type":"link"}