{"product_id":"ohlins-shock-spring-35-n-mm-90-mm-46-mm-00180-13","title":"Öhlins Shock Spring 35 N\/mm \/ 90 mm \/ Ø 46 mm – 00180-13","description":"\u003cp\u003eÖhlins part number 00180-13 is a shock absorber spring rated at 35 N\/mm, 90 mm long with a 46 mm inner diameter. A rear spring matched to rider and load keeps the chassis attitude where the factory intended it.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMeasured spring rate 35 N\/mm\u003c\/li\u003e\n\u003cli\u003eFree length 90 mm\u003c\/li\u003e\n\u003cli\u003eÖhlins part number 00180-13\u003c\/li\u003e\n\u003cli\u003eStraight-wound, constant rate\u003c\/li\u003e\n\u003cli\u003e38 mm of usable stroke\u003c\/li\u003e\n\u003cli\u003ePowder-coated black\u003c\/li\u003e\n\u003cli\u003eInner diameter 46 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHow Öhlins Makes Them\u003c\/h2\u003e\u003cp\u003eÖhlins publishes recommended sag figures for its springs, so the setup has a reference rather than a feel. Öhlins sets a baseline for each part number on the machine it was developed on, so it works before anything is adjusted. Rates are offered in defined steps, so a change can be made in one direction at a time.\u003c\/p\u003e\u003ch2\u003eDimensions\u003c\/h2\u003e\u003cp\u003eÖhlins holds the free length at 90 mm and the inner diameter at 46 mm across this rate range, so moving up or down a rate changes nothing about the installation.\u003c\/p\u003e\u003ch2\u003eChoosing 35 N\/mm\u003c\/h2\u003e\u003cp\u003eRates in this range suit lighter riders and machines that spend their time on real roads rather than smooth circuits. Lighter riders usually end up a step or two below the factory rate once sag is measured properly. A softer rate keeps the tyre loaded on a poor surface, which is worth more than outright support on most roads. Ride quality on the road is decided by rate first and damping second.\u003c\/p\u003e\u003ch2\u003eRate and the Linkage\u003c\/h2\u003e\u003cp\u003eRear spring rate sets ride height and static sag, and those two decide the chassis attitude before any damping click matters. Progressive springs change rate through the stroke, which suits machines with little travel and a lot of load. A spring that has settled in service sits shorter than new, which quietly lowers the bike and steepens the steering.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eThis is a service part in the proper sense — it wears, it settles, and replacing it restores what the suspension was designed to do. Öhlins builds springs to dimensions rather than to model lists, so the question is always the same: does the diameter fit, does the length fit, and is the rate right for the rider? Öhlins lists no fixed model here — the spring is defined by its measurements, and any fork with matching dimensions can take it.\u003c\/p\u003e\u003ch2\u003eWhat Fitting Involves\u003c\/h2\u003e\u003cp\u003eSet static sag after fitting; the rate is only right if the sag figure lands where Öhlins specifies. Fitting is a fork-oil job: the legs come apart, the springs go in, the oil level is set to specification. Any suspension workshop can fit these; the fork does not need to leave the bike for long.\u003c\/p\u003e\u003ch2\u003eRoad Approval\u003c\/h2\u003e\u003cp\u003eRoad approval: a spring is a like-for-like replacement of a wear part and carries no separate type approval. Where Öhlins states an approval for a particular motorcycle, it is named under Applications.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eÖhlins components deliver what they promise once they are fitted and set up properly. As an authorised Öhlins service centre we do exactly that in house — installation, service and setup. Simply ask if you would like us to take care of it.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 00180-13\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSpring Rate:\u003c\/em\u003e 35 N\/mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFree Length:\u003c\/em\u003e 90 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eInner Diameter:\u003c\/em\u003e 46 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eStroke:\u003c\/em\u003e 38 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eConstruction:\u003c\/em\u003e Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Powder-coated black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53645312459018,"sku":"00180-13","price":103833.67,"currency_code":"ARS","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/RearOhlinsSpring_bf076a16-375a-4c08-9d64-e48349ccf480.png?v=1788866493","url":"https:\/\/inter-pace.com\/en-ar\/products\/ohlins-shock-spring-35-n-mm-90-mm-46-mm-00180-13","provider":"Inter-Pace","version":"1.0","type":"link"}