The facts.
| Model | I2M ABS Eliminator |
|---|---|
| Compatibility | MV Agusta F3 800 (21-26) |
| Function | Emulator for removing the ABS control unit |
| Installation | Plug-and-play, no cutting, soldering or wiring modification required |
| Intended Use | Track use only |
DescriptionThe whole story▼
Stripping your MV Agusta F3 800 back to a focused track tool does not have to mean wrestling with wiring looms or dealing with persistent ECU fault codes. The I2M ABS Eliminator gives you a clean, affordable route to removing the ABS control unit on 2021–2026 F3 800 models — all with a straightforward plug-and-play connection that keeps your harness entirely intact.
Key Features
- Fits MV Agusta F3 800 model years 2021 through 2026 with direct plug-and-play connection
- Allows complete removal of the ABS control unit without triggering ECU warning codes or electronic interference
- Replicates the relevant wheel-speed sensor signals so the motorcycle's remaining electronic systems continue to operate correctly
- No cutting, no soldering, no modification to the original wiring harness — the factory loom stays untouched
- Compact and lightweight construction, consistent with a genuine weight-reduction conversion
- Developed exclusively for closed-circuit track use
Practical Track Conversion, Done Properly
The later-generation MV Agusta F3 800 pairs supersport aggression with a sophisticated electronic architecture. When the goal is a serious track conversion, that electronics package demands equal care: a poorly executed ABS delete can leave you chasing ghost fault codes, or worse, compromise systems that share sensor data with the ABS module. The I2M ABS Eliminator removes that concern entirely.
Once installed, the emulator feeds the ECU the wheel-speed signals it expects, so the dashboard stays clear, the electronics management system behaves normally, and your attention can stay on the lap rather than on fault-finding in the paddock. For riders preparing their F3 800 on a budget or against the clock before a track day, this straightforward approach is exactly what is needed.
Installation Without Compromise
The I2M unit is designed around the premise that a clean build should not require a wiring specialist. Remove the ABS control unit, plug the I2M Eliminator into the existing connectors, and the job is done. There is no permanent alteration to the harness, which matters both for build quality and, if required, for returning the motorcycle closer to its original state at a later date. On a modern MV Agusta, where the electronic systems are tightly integrated, that level of precision engineering is not a luxury — it is a practical necessity.
Who This Product Is For
The I2M ABS Eliminator is the right choice if you are:
- Building your MV Agusta F3 800 specifically for closed-circuit use and want a tidy, professional result
- Looking for a no-compromise ABS delete solution that does not involve improvised wiring work
- Committed to a plug-and-play installation that leaves the original wiring harness untouched
- After clean electronic function despite the ABS unit removal — no warning lights, no sensor dropouts
- Preparing the bike for weight reduction and functional simplicity on track
Important Notice
This product is intended exclusively for closed-circuit track use and is not approved for use on public roads.
Fitment & Compatibility
The I2M ABS Eliminator is designed specifically for the following model:
- MV Agusta F3 800 (2021–2026)
Specifications
| Model | I2M ABS Eliminator |
|---|---|
| Compatibility | MV Agusta F3 800 (21-26) |
| Function | Emulator for removing the ABS control unit |
| Installation | Plug-and-play, no cutting, soldering or wiring modification required |
| Intended Use | Track use only |
What's includedEverything in the box▼
- 1x ABS Eliminator
FitmentWhich bikes this fits▼
- MV Agusta F3 800 (2021–2026)
Questions, one topic at a time.
Get the real shipping cost for this item to your address — the same rates as checkout.
Choose a destination and hit Estimate — we fetch the live rates for this item.
We’re based in Germany. Standard delivery goes by DHL and national postal services and takes about 2–5 days within Germany, 1–2 weeks within the EU and 2–6 weeks outside the EU. Need it sooner? Express delivery reaches most of the world within a few days — just choose it at checkout where available.
Your exact shipping cost is calculated by destination and weight and shown at checkout before you pay — no hidden fees. Express delivery is selectable at checkout where available.
Yes, we ship to over 130 countries. Prices, taxes and delivery times for your destination are calculated automatically at checkout.
Within the EU, no — our prices already include all duties and EU VAT. For deliveries outside the EU (e.g. Switzerland, the UK or the USA), your order may be subject to import duties and taxes set by your country. These are collected by the carrier when your parcel arrives, aren’t included in our prices, and are outside our control.
As soon as your parcel ships we email you a tracking link, so you can follow it all the way to your door.
On out-of-stock items you can request a delivery time or leave your email to be notified the moment it returns — just use the notification box on the product.
You have the right to cancel within 14 days of receiving your order. Register your return by email first; once it’s approved you have a further 14 days to send the goods back. Items should be unused and in their original packaging.
Register your return by email with your order number before sending anything back, and we’ll send you the return instructions. Please note: returns that aren’t registered in advance can’t be accepted.
The quickest way is to place a new order for the size you need and register a return for the original by email — just let us know it’s an exchange.
We’re sorry — that shouldn’t happen. Contact us with your order number and a photo as soon as you can, and we’ll arrange a replacement or refund right away. Faulty goods are always covered by your statutory warranty.
Refunds go back to your original payment method, usually within 3–5 working days of your return reaching our warehouse.
PayPal, all major credit and debit cards (Visa, Mastercard, American Express), Klarna (pay later and instalments), Apple Pay, Google Pay and more — all processed securely via PayPal and Mollie.
Yes. Choose Klarna at checkout to split your purchase into flexible monthly installments.
Your payment is taken when you place your order. If you choose Klarna, you pay later according to Klarna’s terms.
Every payment runs over an SSL-encrypted connection through certified providers. We never see or store your full card details.
If your order hasn’t shipped yet, contact us as soon as possible and we’ll do our best to change or cancel it.
No — you can check out as a guest. An account simply lets you track orders and reorder faster.
For customers in the EU, prices are shown including your country’s local VAT. For customers outside the EU, prices are shown without VAT — instead, your country’s import taxes and duties may apply on delivery (see the customs question).
Yes. Your invoice is attached to your order confirmation email and is also available in your account.
Yes. We’re an authorised dealer, so every product is 100% original and comes with the full manufacturer warranty.
Yes. Everything we sell is genuine and comes with the manufacturer’s warranty, on top of your statutory rights. Keep your invoice as proof of purchase and contact us if you ever need to make a claim — we’ll help you through it.
Our team is happy to help. Use the contact button below and we’ll personally help you choose the right gear or part.
Measure your head circumference about one centimetre above your eyebrows and compare it with the size chart on this page. Between sizes? Choose the smaller one — the padding beds in with use.
Yes — it’s tested and approved to the current ECE 22.06 standard and road-legal across the EU.
Most of our touring and sport helmets are Pinlock-ready and many include the insert. Check the ‘What’s in the box’ section on this page for this model.
Yes — the cheek pads are channelled so the arms of your glasses slide in comfortably.
Take out the washable lining and hand-wash it in lukewarm water. Clean the shell and visor with a soft cloth and water only — never solvents.
Our team will personally help you choose the right gear or part — around 24h for a reply.