{"product_id":"ohlins-shock-spring-115-n-mm-190-mm-57-mm-01096-41","title":"Öhlins Shock Spring 115 N\/mm \/ 190 mm \/ Ø 57 mm – 01096-41","description":"\u003cp\u003eÖhlins part number 01096-41 is a shock absorber spring rated at 115 N\/mm, 190 mm long with a 57 mm inner diameter. The damper can only control the spring it is given; the wrong rate makes every click a compromise.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFree length 190 mm\u003c\/li\u003e\n\u003cli\u003eÖhlins part number 01096-41\u003c\/li\u003e\n\u003cli\u003eInner diameter 57 mm\u003c\/li\u003e\n\u003cli\u003eMeasured spring rate 115 N\/mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eManufacture and Tolerance\u003c\/h2\u003e\u003cp\u003eÖhlins publishes recommended sag figures for its springs, so the setup has a reference rather than a feel. Anodising is hard-coat rather than decorative, which matters on a component exposed to road salt and stone chips. Öhlins sets a baseline for each part number on the machine it was developed on, so it works before anything is adjusted.\u003c\/p\u003e\u003ch2\u003eSize and Rate\u003c\/h2\u003e\u003cp\u003eFree length 190 mm, inner diameter 57 mm, rate 115 N\/mm — those three figures define the part completely.\u003c\/p\u003e\u003ch2\u003eWhere This Rate Belongs\u003c\/h2\u003e\u003cp\u003eFirm rates also suit machines carrying luggage as a matter of course. Support under braking improves; small-bump comfort gives a little back. A firm rate holds the chassis attitude when the front or rear is loaded hard. Ride quality on the road is decided by rate first and damping second.\u003c\/p\u003e\u003ch2\u003eHow a Rear Spring Works\u003c\/h2\u003e\u003cp\u003eRear spring rates run in the tens or hundreds of N\/mm because the spring sits at the short end of that lever, not at the wheel. Progressive springs change rate through the stroke, which suits machines with little travel and a lot of load. Because the linkage is progressive on most modern machines, a small change in rate moves the sag more than riders expect.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eThe safest way to choose is by static sag: set the target figure, and the rate follows from whether you can reach it with preload. If you are replacing a sagged original, measure its free length first — a tired spring often measures several millimetres short. A spring is one of the few suspension parts that is genuinely interchangeable: same bore, same free length, and it goes in.\u003c\/p\u003e\u003ch2\u003eWhat Fitting Involves\u003c\/h2\u003e\u003cp\u003eAny suspension workshop can fit these; the fork does not need to leave the bike for long. Fitting is a fork-oil job: the legs come apart, the springs go in, the oil level is set to specification. Check the free length against the old springs before fitting — a sagged original often measures short.\u003c\/p\u003e\u003ch2\u003eRoad Approval\u003c\/h2\u003e\u003cp\u003eRoad approval: not applicable to the spring on its own. Öhlins issues approvals against complete suspension units, not individual springs.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eWe are an authorised Öhlins service centre, so the installation does not have to be your problem: we fit and set up Öhlins components in our own workshop. Ask us when you order and we will include the work.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 01096-41\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSpring Rate:\u003c\/em\u003e 115 N\/mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFree Length:\u003c\/em\u003e 190 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eInner Diameter:\u003c\/em\u003e 57 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53645347913994,"sku":"01096-41","price":413.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/RearOhlinsSpring_57f68b12-a804-42ab-8844-7232336fcfef.png?v=1788866702","url":"https:\/\/inter-pace.com\/en-ae\/products\/ohlins-shock-spring-115-n-mm-190-mm-57-mm-01096-41","provider":"Inter-Pace","version":"1.0","type":"link"}