{"title":"Griffe","description":"\u003cp\u003eGrips from Domino, ProGrip and JetPrime — race-compound rubber in the profiles Grand Prix teams actually use, from soft diamond patterns to dual-compound road builds.\u003c\/p\u003e\u003cp\u003eGrip choice is contact-point tuning: softer compounds give feel and need replacing more often; firmer ones last road seasons. Check internal diameter (throttle side vs clutch side) and length against your bars — glue and safety wire for race use, as ever.\u003c\/p\u003e","products":[{"product_id":"progrip-racing-grip-type-717","title":"ProGrip Racing Grip Type 717 - Premium-Lenkergriffe in mehreren Farben","description":"\u003cp\u003eDer ProGrip Racing Grip Type 717 ist für Fahrer konzipiert, die bei der Verarbeitungsqualität keine Kompromisse eingehen. Aus hochwertiger Gummimischung mit präzisionsgeformten Maßen gefertigt, liefert dieser Griff eine sichere, ermüdungsfreie Verbindung zwischen Fahrer und Lenker bei jeder Straßen- oder Streckenbedingung. Erhältlich in sieben verschiedenen Farben, fügt er sich in jede Cockpit-Ästhetik ein, ohne auch nur ein Gramm Leistung zu opfern.\u003c\/p\u003e\u003ch2\u003eHauptmerkmale\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eZweckmäßiges Griffprofil mit 122 mm Länge für eine ergonomisch ausgewogene Handposition an Standard- und Stummellenkern.\u003c\/li\u003e\n\u003cli\u003eDuales Innendurchmesser-Design — 22 mm links, 25 mm rechts — passt ohne Spiel oder Spalt auf die Gasgriffhülse.\u003c\/li\u003e\n\u003cli\u003eEine spezielle Sicherungsdraht-Nut am Griffende ermöglicht die Montage eines Sicherungsdrahts, sodass der Griff bei Nässe, auf der Strecke oder bei anhaltend forscher Fahrweise sicher positioniert bleibt.\u003c\/li\u003e\n\u003cli\u003e50 mm Wulstdurchmesser sorgt für einen sicheren, bündigen Sitz am Lenkerende, um Drehen oder Wandern unter Last zu verhindern.\u003c\/li\u003e\n\u003cli\u003eDie 22-mm-Lenkerpassform deckt die überwiegende Mehrheit der Sport-, Supersport- und Naked-Motorräder auf dem Markt ab.\u003c\/li\u003e\n\u003cli\u003eAls passendes Paar geliefert — linker und rechter Griff enthalten — sodass die Installation von Anfang an unkompliziert und ausgewogen ist.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eVerarbeitungsqualität und Materialien\u003c\/h2\u003e\u003cp\u003eProGrips Type-717-Mischung wurde mit renn-abgeleiteter Gummitechnologie entwickelt und bietet jenes feste, aber nachgiebige Gefühl, das anhaltender Vibration und Hitze standhält, ohne zu verhärten oder zu reißen. Die Oberflächentextur ist geformt statt geschnitten, was bedeutet, dass das Griffmuster über eine volle Saison hinweg seine Integrität behält. Jede Abmessung wird auf enge Toleranzen gehalten: Die abgestufte 22\/25-mm-Bohrung passt sauber über das linke Lenkerende und das Gasgriffrohr, während der 50-mm-Wulst bündig gegen die Lenkerend-Hardware sitzt, ohne zu zwingen. Das Ergebnis ist ein Griff, der einmal richtig installiert wird und genau dort bleibt, wo er sein soll.\u003c\/p\u003e\u003ch2\u003eLeistung auf Straße und Strecke\u003c\/h2\u003e\u003cp\u003eDie Sicherungsdraht-Aussparung ist das Detail, das den Type 717 von Einsteigergriffen unterscheidet. Auf der Strecke verlangen sowohl das Reglement als auch der gesunde Menschenverstand, dass Griffe sich nicht drehen oder vom Lenker wandern können; die eingelassene Nut gibt einem Sicherungsdraht einen festen Ansatzpunkt, sodass der Griff sowohl mechanisch gesichert als auch verklebt ist. Auf der Straße eliminiert dasselbe Merkmal die Sorge, dass ein Griff nach einer nassen Pendelfahrt oder einem langen Reisetag seine Position verschiebt. Die 122-mm-Länge lässt bei den meisten Aufbauten ausreichend Freiraum für Lenkerendgewichte oder Spiegel, während die strukturierte Außenfläche auch mit regennassen Handschuhen guten Halt bietet.\u003c\/p\u003e\u003ch2\u003ePassform und Kompatibilität\u003c\/h2\u003e\u003cp\u003eDer ProGrip Racing Grip Type 717 passt an jedes Motorrad mit einem Standard-22-mm-Lenker. Die universelle Passform macht ihn kompatibel mit einer breiten Palette von Maschinen, einschließlich, aber nicht beschränkt auf Modelle von Aprilia (RSV4, RS 660, RS 457), Ducati (848, 899, 959, 1199, 1299), BMW (S1000RR, HP4, M1000RR), Honda (CBR 600 RR, CBR 1000 RR, CBR 1000 RR-R), Kawasaki (ZX-6R, ZX-10 R, ZX-10 RR, ZX-4 RR, Ninja 400), KTM (RC 390, RC8 1190), MV Agusta (F3, F4), Suzuki (GSX-R 600, GSX-R 750), Triumph (Daytona 675, Daytona 675 R, Daytona 765, Street Triple 765 R, Street Triple 765 RS) und Yamaha (R1, R1M, R3, R6, R7, R9). Überprüfe vor der Montage stets deinen Lenkerdurchmesser.\u003c\/p\u003e\u003ch2\u003eSpezifikationen\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMarke: ProGrip\u003c\/li\u003e\n\u003cli\u003eModell: Type 717 Racing Grip\u003c\/li\u003e\n\u003cli\u003eLänge: 122 mm\u003c\/li\u003e\n\u003cli\u003eInnendurchmesser: 22 mm (links), 25 mm (rechts)\u003c\/li\u003e\n\u003cli\u003eLenkerdurchmesser: 22 mm\u003c\/li\u003e\n\u003cli\u003eWulstdurchmesser: 50 mm\u003c\/li\u003e\n\u003cli\u003eSicherungsdraht-Nut: ja, integrierte Aussparung\u003c\/li\u003e\n\u003cli\u003eLieferumfang: 1 Paar (linker und rechter Griff)\u003c\/li\u003e\n\u003cli\u003eVerfügbare Farben: Schwarz, Grau, Gelb, Orange, Rot, Grün, Blau\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ProGrip","offers":[{"title":"Black","offer_id":53167133655306,"sku":"717_black","price":20.47,"currency_code":"EUR","in_stock":true},{"title":"Grey","offer_id":53167133688074,"sku":"717_grey","price":20.47,"currency_code":"EUR","in_stock":true},{"title":"Yellow","offer_id":53167133720842,"sku":"717_yellow","price":20.47,"currency_code":"EUR","in_stock":true},{"title":"Orange","offer_id":53167133753610,"sku":"717_orange","price":20.47,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":53167133786378,"sku":"717_red","price":20.47,"currency_code":"EUR","in_stock":true},{"title":"Green","offer_id":53167133819146,"sku":"717_green","price":20.47,"currency_code":"EUR","in_stock":true},{"title":"Blue","offer_id":53167133851914,"sku":"717_blue","price":20.47,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/717schwarz.png?v=1780790986"},{"product_id":"domino-a010-racing-grips","title":"Domino A010 Racing-Lenkergriffe – Dual-Compound-Lenkergriffe in mehreren Farben","description":"\u003cp\u003eGefertigt aus thermoplastischer Gummimischung (TPR) in Dual-Compound-Bauweise, bieten die Domino A010 Racing-Lenkergriffe genau die taktile Präzision und langlebige Haltbarkeit, die ambitionierte Straßen- und Streckenfahrer erwarten. Der feste Innenkern und die griffige Außenfläche arbeiten zusammen, um Vibrationen zu absorbieren, die Ermüdung zu reduzieren und eine sichere Verbindung zum Lenker bei jeder Fahrweise zu gewährleisten.\u003c\/p\u003e\u003ch2\u003eHauptmerkmale\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDual-Compound-TPR-Konstruktion — ein stabiler Innenkern kombiniert sich mit einer strukturierten Außenschicht für gleichzeitige Stabilität und Grip\u003c\/li\u003e\n\u003cli\u003eDie Multi-Pyramiden-Struktur der Oberfläche sorgt sowohl bei Nässe als auch bei Trockenheit für sicheren Halt — egal ob bei aggressiver Kurvenfahrt oder ausgedehnten Touren\u003c\/li\u003e\n\u003cli\u003eDie offene Endkappe gewährleistet Kompatibilität mit Lenkerendgewichten, Spiegeln und anderem Racing-Zubehör\u003c\/li\u003e\n\u003cli\u003ePassend für 22 mm (7\/8 Zoll) und 25,4 mm (1 Zoll) Lenkerdurchmesser — geeignet für eine breite Palette an Motorrädern\u003c\/li\u003e\n\u003cli\u003eErhältlich in einer breiten Auswahl an Farbkombinationen, passend zu jeder Lackierung und jedem persönlichen Stil\u003c\/li\u003e\n\u003cli\u003eGeliefert als aufeinander abgestimmtes Paar, links und rechts, einsatzbereit direkt aus der Verpackung\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eVerarbeitungsqualität und Materialien\u003c\/h2\u003e\u003cp\u003eDomino hat sich seinen Ruf durch die Materialqualität erarbeitet, die in jeden produzierten Griff einfließt, und der A010 bildet da keine Ausnahme. Die thermoplastische Gummimischung wird gezielt wegen ihrer Beständigkeit gegen Öl, UV-Alterung und die mechanische Belastung im dauerhaften Streckeneinsatz gewählt. Die Multi-Pyramiden-Oberflächenstruktur wird direkt in die Mischung eingeformt statt nachträglich aufgebracht, sodass das Muster über die gesamte Lebensdauer des Griffs scharf und funktionsfähig bleibt. Der Flanschdurchmesser von 46 mm sorgt für einen sauberen, werksmäßigen Übergang zur Schalterarmatur oder zum Gasgriffgehäuse, während der montierte Außendurchmesser von 30 mm ein natürliches, ergonomisches Gefühl bietet, das sowohl kleinen als auch großen Händen entgegenkommt.\u003c\/p\u003e\u003ch2\u003eLeistung auf Straße und Strecke\u003c\/h2\u003e\u003cp\u003eOb Sie auf der Rennstrecke Rundenzeiten jagen oder auf einer sportlichen Straßentour unterwegs sind — der A010 liefert bei jeder Eingabe konsistente Rückmeldung. Die vibrationsdämpfenden Eigenschaften der Dual-Compound-Bauweise reduzieren die hochfrequenten Schwingungen, die von Motor und Fahrbahn übertragen werden, sodass die Hände auch bei langen Etappen frischer bleiben. Das Griffmuster funktioniert auch mit Handschuhen bei Nässe zuverlässig — ein entscheidendes Detail für Fahrer, die dasselbe Setup bei jedem Wetter nutzen. Dank der Längenoptionen 120 mm und 125 mm lässt sich der A010 präzise auf die Gasgriffrohrlänge und die Lenkerkonfiguration abstimmen.\u003c\/p\u003e\u003ch2\u003ePassform und Kompatibilität\u003c\/h2\u003e\u003cp\u003eDer Domino A010 passt auf jedes Motorrad mit 22 mm (7\/8 Zoll) oder 25,4 mm (1 Zoll) Lenkerdurchmesser. Kompatible Modelle umfassen unter anderem:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAprilia RSV4, RSV4 R, RSV4 RR, RSV4 RF, RSV4 1100, RSV4 1100 Factory, RS 660, RS 457\u003c\/li\u003e\n\u003cli\u003eBMW S1000RR, M1000RR, HP4, HP4R\u003c\/li\u003e\n\u003cli\u003eDucati 848, 899, 959, 1199, 1199 S, 1199 R, 1299, 1299 S\u003c\/li\u003e\n\u003cli\u003eHonda CBR 600 RR, CBR 1000 RR, CBR 1000 RR-R\u003c\/li\u003e\n\u003cli\u003eKawasaki ZX-6R, ZX-10 R, ZX-10 RR, ZX-4 RR, Ninja 400\u003c\/li\u003e\n\u003cli\u003eKTM RC 390, RC8 1190\u003c\/li\u003e\n\u003cli\u003eMV Agusta F3, F4\u003c\/li\u003e\n\u003cli\u003eSuzuki GSX-R 600, GSX-R 750, GSX-R 1000\u003c\/li\u003e\n\u003cli\u003eTriumph Daytona 675, Daytona 675 R, Daytona 765, Daytona 765 Moto2, Street Triple 765 R, Street Triple 765 RS\u003c\/li\u003e\n\u003cli\u003eYamaha R1, R1M, R3, R6, R7, R9\u003c\/li\u003e\n\u003cli\u003eUniversal passend — jeder Lenker mit 22 mm oder 25,4 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnische Daten\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eModell: Domino A010\u003c\/li\u003e\n\u003cli\u003eLänge: 120 mm \/ 125 mm\u003c\/li\u003e\n\u003cli\u003eLenkerdurchmesser: 22 mm (7\/8 Zoll) \/ 25,4 mm (1 Zoll)\u003c\/li\u003e\n\u003cli\u003eFlanschdurchmesser: 46 mm\u003c\/li\u003e\n\u003cli\u003eAußendurchmesser (montiert): 30 mm\u003c\/li\u003e\n\u003cli\u003eEndkappen-Typ: offen\u003c\/li\u003e\n\u003cli\u003eMaterial: Thermoplastische Gummimischung (TPR)\u003c\/li\u003e\n\u003cli\u003eLieferumfang: 1 Paar (links und rechts)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Domino","offers":[{"title":"Grey","offer_id":53168236626186,"sku":"A01041C4052B7-0","price":15.55,"currency_code":"EUR","in_stock":true},{"title":"White","offer_id":53168236658954,"sku":"A01041C4046B7-0","price":15.55,"currency_code":"EUR","in_stock":true},{"title":"Neon Yellow","offer_id":53168236691722,"sku":"A01041C4050B7-0","price":15.55,"currency_code":"EUR","in_stock":true},{"title":"Turquoise","offer_id":53168236724490,"sku":"A01041C4080B7-0","price":15.55,"currency_code":"EUR","in_stock":true},{"title":"Blue\/White","offer_id":53168236757258,"sku":"A01041C4648B7-0","price":15.55,"currency_code":"EUR","in_stock":true},{"title":"Pink","offer_id":53168236790026,"sku":"A01041C4643B7-0","price":15.55,"currency_code":"EUR","in_stock":true},{"title":"Red\/White","offer_id":53168236822794,"sku":"A01041C4642B7-0","price":15.55,"currency_code":"EUR","in_stock":true},{"title":"Red\/Black","offer_id":53168236855562,"sku":"A01041C4042B7-0","price":15.55,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/whiteA010.png?v=1780808483"},{"product_id":"domino-a450-racing-grips","title":"Domino A450 Racing-Lenkergriffe – Dual-Compound-TPR-Lenkergriffe in mehreren Farben","description":"\u003cp\u003eOb auf dem täglichen Weg durch die Stadt oder bei einer sportlichen Ausfahrt am Wochenende — die Domino A450 Racing-Lenkergriffe bieten genau die sichere, ermüdungsfreie Kontrolle, die jede Fahrt angenehmer macht. Die Dual-Compound-TPR-Konstruktion kombiniert einen festen Innenkern mit einer weicheren, vibrationsabsorbierenden Außenschicht und liefert direktes Lenker-Feedback, ohne die Handermüdung, die günstigere Griffe auf längeren Strecken verursachen.\u003c\/p\u003e\u003ch2\u003eHauptmerkmale\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDual-Compound-TPR-Konstruktion: Der feste Strukturkern überträgt Eingaben präzise auf den Lenker, während die weichere Außenschicht Vibrationen absorbiert und die Handflächen bei längeren Fahrten polstert\u003c\/li\u003e\n\u003cli\u003eMulticonic-Finish: Die mikrostrukturierte Oberfläche sorgt sowohl bei Nässe als auch bei Trockenheit für gleichbleibenden Grip und reduziert das ständige Nachgreifen\u003c\/li\u003e\n\u003cli\u003eVariable Länge: 120 mm oder 125 mm je nach Modellpassung, für ein natürliches Gefühl bei unterschiedlichen Lenkerkonfigurationen\u003c\/li\u003e\n\u003cli\u003eUniverselle Passform: kompatibel mit 22 mm (7\/8 Zoll) und 25,4 mm (1 Zoll) Lenkern, geeignet für die überwiegende Mehrheit der Sport- und Naked Bikes\u003c\/li\u003e\n\u003cli\u003eRacing-Draht-vorbereitet: 2 bis 3 in den Griff eingeformte Drahtschlitze ermöglichen eine sichere Verdrahtung für den Streckeneinsatz, ganz ohne Klebstoff\u003c\/li\u003e\n\u003cli\u003eOffene Endkappe: funktioniert direkt aus der Verpackung mit gängigem Lenkerenden-Zubehör, Gewichten und Spiegeln — ohne Umbauten\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAlltagstauglichkeit\u003c\/h2\u003e\u003cp\u003eDer A450 ist eines dieser seltenen Bauteile, die den Alltag genauso verbessern wie die Rundenzeiten. Die Multiconic-Oberfläche bleibt auch mit regen- oder schweißfeuchten Handschuhen berechenbar, und die vibrationsdämpfende Mischung reduziert die Handermüdung auf Autobahnetappen spürbar. Die Montage ist unkompliziert: den Lenker gründlich reinigen, vollständig fettfrei machen, den Griff aufschieben und bei Bedarf für Trackdays mit den integrierten Drahtschlitzen sichern. Für den Straßeneinsatz genügt ein Tropfen Griffkleber. Die Reinigung ist ebenso einfach — verwenden Sie einen pH-neutralen Reiniger und vermeiden Sie lösungsmittelhaltige Produkte, die die TPR-Mischung mit der Zeit angreifen.\u003c\/p\u003e\u003ch2\u003eVerarbeitungsqualität\u003c\/h2\u003e\u003cp\u003eDomino stellt seit Jahrzehnten Gasgriff- und Griffsysteme für MotoGP- und WorldSBK-Teams her, und der A450 bringt genau diese Fertigungsdisziplin in einen Griff, der für den alltäglichen Fahrer entwickelt wurde. Die thermoplastische Gummimischung wird mit präzisen Toleranzen geformt, was dem Griff eine gleichmäßige Wandstärke und einen Flanschdurchmesser von 47 mm verleiht, der bündig an den meisten Gasgriffgehäusen und Kupplungsarmaturen anliegt. Der montierte Außendurchmesser von 31,5 mm trifft für die meisten Handschuhgrößen genau den richtigen Punkt — kräftig genug, um den Kraftaufwand beim Greifen zu reduzieren, schlank genug, um nicht wuchtig zu wirken.\u003c\/p\u003e\u003ch2\u003ePassform und Kompatibilität\u003c\/h2\u003e\u003cp\u003eDer Domino A450 passt auf 22 mm (7\/8 Zoll) und 25,4 mm (1 Zoll) Lenker und ist universell kompatibel mit einer breiten Palette an Motorrädern, darunter Modelle von Aprilia, BMW, Bimota, CFMOTO, Ducati, Honda, Kawasaki, KTM, MV Agusta, QJMotor, Suzuki, Triumph und Yamaha. Beispiele kompatibler Modelle sind unter anderem:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAprilia RSV4, RSV4 R, RSV4 RR, RSV4 RF, RSV4 1100, RSV4 1100 Factory, RS 660, RS 457\u003c\/li\u003e\n\u003cli\u003eBMW S1000RR, M1000RR, HP4, HP4R\u003c\/li\u003e\n\u003cli\u003eDucati 848, 899, 959, 1199, 1199 S, 1199 R, 1299, 1299 S\u003c\/li\u003e\n\u003cli\u003eHonda CBR 600 RR, CBR 1000 RR, CBR 1000 RR-R\u003c\/li\u003e\n\u003cli\u003eKawasaki ZX-6R, ZX-10 R, ZX-10 RR, ZX-4 RR, Ninja 400\u003c\/li\u003e\n\u003cli\u003eKTM RC 390, RC8 1190\u003c\/li\u003e\n\u003cli\u003eMV Agusta F3, F4\u003c\/li\u003e\n\u003cli\u003eSuzuki GSX-R 600, GSX-R 750, GSX-R 1000\u003c\/li\u003e\n\u003cli\u003eTriumph Daytona 675, Daytona 675 R, Daytona 765, Daytona 765 Moto2, Street Triple 765 R, Street Triple 765 RS\u003c\/li\u003e\n\u003cli\u003eYamaha R1, R1M, R3, R6, R7, R9\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnische Daten\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFlanschdurchmesser: 47 mm\u003c\/li\u003e\n\u003cli\u003eAußendurchmesser (montiert): 31,5 mm\u003c\/li\u003e\n\u003cli\u003eLänge: 120 mm oder 125 mm (modellabhängig)\u003c\/li\u003e\n\u003cli\u003eMaterial: Thermoplastische Gummimischung (TPR), Dual-Compound\u003c\/li\u003e\n\u003cli\u003eEndkappen-Typ: offen\u003c\/li\u003e\n\u003cli\u003eLenkerkompatibilität: 22 mm (7\/8 Zoll) und 25,4 mm (1 Zoll)\u003c\/li\u003e\n\u003cli\u003eLieferumfang: Paar (links und rechts)\u003c\/li\u003e\n\u003cli\u003eRacing-Drahtschlitze: 2 bis 3\u003c\/li\u003e\n\u003cli\u003eModell: Domino A450\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Domino","offers":[{"title":"Red\/White","offer_id":53168236888330,"sku":"A45041C4642B7-0","price":16.92,"currency_code":"EUR","in_stock":true},{"title":"Blue\/White","offer_id":53168236921098,"sku":"A45041C4648B7-0","price":16.92,"currency_code":"EUR","in_stock":true},{"title":"Green\/Black","offer_id":53168236953866,"sku":"A45041C4044B7-0","price":16.92,"currency_code":"EUR","in_stock":true},{"title":"Pink\/Black","offer_id":53168236986634,"sku":"A45041C4043B7-0","price":16.92,"currency_code":"EUR","in_stock":true},{"title":"Blue\/Black","offer_id":53168237019402,"sku":"A45041C4048B7-0","price":16.92,"currency_code":"EUR","in_stock":true},{"title":"Red\/Black","offer_id":53168237052170,"sku":"A45041C4042B7-0","price":16.92,"currency_code":"EUR","in_stock":true},{"title":"Grey\/Neon Yellow","offer_id":53168237084938,"sku":"A45041C5052B7-0","price":16.92,"currency_code":"EUR","in_stock":true},{"title":"Grey\/Black","offer_id":53168237117706,"sku":"A45041C4052B7-0","price":16.92,"currency_code":"EUR","in_stock":true},{"title":"Blue\/Red","offer_id":53168237150474,"sku":"A45041C4248B7-0","price":16.92,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/redwhitea450.png?v=1780808484"},{"product_id":"domino-a010-racing-grips-black","title":"Domino A010 Racing-Griffe in Schwarz – Dual-Compound-Lenkergriffe für Straße und Strecke","description":"\u003cp\u003eDie Domino A010 Racing-Griffe sind nach einem Standard gefertigt, den echter Straßenrennsport verlangt — eine Dual-Compound-Konstruktion aus thermoplastischer Gummimischung, die in jeder Kurve und auf jeder Geraden ein stabiles, präzises Gefühl liefert. Mit der schwarzen Grundfarbe, die zur aggressiven Optik jeder Supersport-Maschine passt, ist dies ein Griff, der sich seinen Platz auf ernsthaftem Sportgerät verdient.\u003c\/p\u003e\u003ch2\u003eHauptmerkmale\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDual-Compound-Konstruktion: Ein fester Innenkern sorgt für strukturelle Steifigkeit, während eine weichere Außenschicht Vibrationen absorbiert und das taktile Feedback am Gasgriff erhält\u003c\/li\u003e\n\u003cli\u003eMulti-Pyramiden-Oberflächenstruktur, entwickelt für gleichbleibenden Grip bei Nässe und Trockenheit, auch bei langen Streckeneinheiten\u003c\/li\u003e\n\u003cli\u003eUniverselle Passform für 22 mm (7\/8\") und 25,4 mm (1\") Lenker deckt die überwiegende Mehrheit der Naked-, Supersport- und Superbike-Anwendungen ab\u003c\/li\u003e\n\u003cli\u003eDie offene Endkappe ist ohne Umbauten mit gängigem Racing-Zubehör, Lenkerendgewichten und Spiegeladaptern kompatibel\u003c\/li\u003e\n\u003cli\u003eGeliefert als aufeinander abgestimmtes Paar — links und rechts — für ein ausgewogenes Gefühl an beiden Bedienelementen\u003c\/li\u003e\n\u003cli\u003eAuf den Rennsport ausgerichtete Farbvarianten ermöglichen eine präzise Abstimmung mit der Motorradlackierung und Zubehörteilen\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eVerarbeitungsqualität und Materialien\u003c\/h2\u003e\u003cp\u003eDomino beliefert seit Jahrzehnten professionelle Rennfahrerlager, und der A010 spiegelt dieses Erbe auf jeder Fertigungsebene wider. Die thermoplastische Gummimischung wird wegen ihrer Beständigkeit gegen Kraftstoff, Öl und Temperaturwechsel gewählt — Bedingungen, die günstigere Griffmaterialien schnell zersetzen. Der Dual-Compound-Aufbau ist keine reine Marketingbeschreibung: Die härtere Innenhülse bewahrt unter Klemmlast eine konstante Geometrie und verhindert, dass der Griff auf dem Lenker kollabiert oder wandert, während die Außenhaut nachgiebig genug bleibt, um Lenkervibrationen zu dämpfen, ohne das Fahrbahngefühl zu unterdrücken. Der Flanschdurchmesser von 46 mm sorgt für einen sauberen Übergang zwischen Griff und Schalterarmatur, und der Montagedurchmesser von 30 mm gewährleistet einen sicheren, klapperfreien Sitz ohne übermäßiges Anzugsmoment an den Lenkerklemmen.\u003c\/p\u003e\u003ch2\u003eAuf Straße und Strecke\u003c\/h2\u003e\u003cp\u003eSpeziell für den Straßenrennsport entwickelt, entfaltet der A010 sein volles Potenzial, wenn das Tempo steigt und die Anforderungen an den Fahrer wachsen. Die Multi-Pyramiden-Oberfläche hält auch dann sicheren Halt, wenn Handschuhe durch Nässe oder Schweiß während eines langen Trackdays feucht werden, und reduziert die Mikrobewegungen, die zu Ermüdung und Ungenauigkeit führen. Mit den verfügbaren Längen 120 mm und 125 mm passt sich der Griff verschiedenen Handpositionen an und lässt sich auf das ergonomische Setup von Stummellenkern oder flachen Lenkern nahezu jeder modernen Supersport-Plattform abstimmen.\u003c\/p\u003e\u003ch2\u003ePassform und Kompatibilität\u003c\/h2\u003e\u003cp\u003eDer Domino A010 ist ein universeller Griff, geeignet für jedes Motorrad mit 22 mm (7\/8\") oder 25,4 mm (1\") Lenkerdurchmesser. Kompatible Plattformen umfassen unter anderem:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAprilia RSV4, RSV4 R, RSV4 RR, RSV4 RF, RSV4 1100, RSV4 1100 Factory, RS 660, RS 457\u003c\/li\u003e\n\u003cli\u003eBMW S1000RR, M1000RR, HP4, HP4R\u003c\/li\u003e\n\u003cli\u003eDucati 848, 899, 959, 1199, 1199 S, 1199 R, 1299, 1299 S\u003c\/li\u003e\n\u003cli\u003eHonda CBR 600 RR, CBR 1000 RR, CBR 1000 RR-R\u003c\/li\u003e\n\u003cli\u003eKawasaki ZX-6R, ZX-10 R, ZX-10 RR, ZX-4 RR, Ninja 400\u003c\/li\u003e\n\u003cli\u003eKTM RC 390, RC8 1190, 990 RC R\u003c\/li\u003e\n\u003cli\u003eMV Agusta F3, F4\u003c\/li\u003e\n\u003cli\u003eSuzuki GSX-R 600, GSX-R 750, GSX-R 1000\u003c\/li\u003e\n\u003cli\u003eTriumph Daytona 675, Daytona 675 R, Daytona 765, Daytona 765 Moto 2, Street Triple 765 R, Street Triple 765 RS\u003c\/li\u003e\n\u003cli\u003eYamaha R1, R1M, R3, R6, R7, R9\u003c\/li\u003e\n\u003cli\u003eBimota KB998 Rimini\u003c\/li\u003e\n\u003cli\u003eCFMOTO, QJMotor und andere Motorräder mit universeller Lenkerpassung\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnische Daten\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMarke: Domino\u003c\/li\u003e\n\u003cli\u003eModell: A010\u003c\/li\u003e\n\u003cli\u003eMaterial: Thermoplastische Gummimischung (TPR), Dual-Compound\u003c\/li\u003e\n\u003cli\u003eLänge: 120 mm \/ 125 mm\u003c\/li\u003e\n\u003cli\u003eLenkerdurchmesser: 22 mm (7\/8\") \/ 25,4 mm (1\")\u003c\/li\u003e\n\u003cli\u003eFlanschdurchmesser: 46 mm\u003c\/li\u003e\n\u003cli\u003eMontagedurchmesser: 30 mm\u003c\/li\u003e\n\u003cli\u003eDesign: Offene Endkappe\u003c\/li\u003e\n\u003cli\u003eMenge: Paar (links und rechts)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Domino","offers":[{"title":"Grey","offer_id":53168237183242,"sku":"A01041C5240B7-0","price":15.55,"currency_code":"EUR","in_stock":true},{"title":"Yellow","offer_id":53168237216010,"sku":"A01041C4740B7-0","price":15.55,"currency_code":"EUR","in_stock":true},{"title":"Orange","offer_id":53168237248778,"sku":"A01041C4540B7-0","price":15.55,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":53168237281546,"sku":"A01041C4240B7-0","price":15.55,"currency_code":"EUR","in_stock":true},{"title":"Green","offer_id":53168237314314,"sku":"A01041C4440B7-0","price":15.55,"currency_code":"EUR","in_stock":true},{"title":"Blue","offer_id":53168237347082,"sku":"A01041C4840B7-0","price":15.55,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/A10rot.png?v=1780808484"},{"product_id":"domino-a450-racing-grips-black","title":"Domino A450 Racing-Lenkergriffe in Schwarz – Dual-Compound Thermoplastische Gummimischung","description":"\u003cp\u003eNur wenige Lenkergriffe können auf eine Rennstrecken-Historie wie der Domino A450 verweisen. Im italienischen Rennsport geboren und über Jahrzehnte im Wettkampf verfeinert, überträgt der A450 in Schwarz dieses Motorsport-Erbe direkt auf Ihren Lenker — eine zweckmäßige Optik trifft auf die technische Substanz, auf die Spitzenfahrer seit Jahren vertrauen.\u003c\/p\u003e\u003ch2\u003eHauptmerkmale\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDie Dual-Compound-Konstruktion aus Thermoplastischer Gummimischung (TPR) sorgt bei jeder Witterung für sicheren Halt – von kalten Morgenfahrten bis zu langen Rennstrecken-Sessions.\u003c\/li\u003e\n\u003cli\u003eDie Multiconic-Oberflächenstruktur reduziert übertragene Vibrationen und erhöht die Kontaktreibung, damit Ihre Hände auch auf langen Strecken oder bei harten Bremsmanövern entspannt bleiben.\u003c\/li\u003e\n\u003cli\u003eDie universelle Passform für 22 mm (7\/8 Zoll) und 25,4 mm (1 Zoll) Lenker macht den A450 mit nahezu dem gesamten modernen Motorradangebot kompatibel.\u003c\/li\u003e\n\u003cli\u003eDie offene Bauform mit 2–3 Drahtsicherungs-Schlitzen eignet sich für eine Vielzahl von Gasgriffrohr- und Lenkerenden-Konfigurationen.\u003c\/li\u003e\n\u003cli\u003eRennerprobte Haltbarkeit — die A450-Gummimischung wurde im professionellen Wettkampf entwickelt und validiert, nicht nur optisch auf Renn-Look getrimmt.\u003c\/li\u003e\n\u003cli\u003eWird als aufeinander abgestimmtes Paar (links und rechts) geliefert, montagefertig direkt aus der Verpackung.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign, Verarbeitung und Erbe\u003c\/h2\u003e\u003cp\u003eDer schwarze A450 ist der reinste Ausdruck von Dominos Designsprache: klar, zurückhaltend und unverkennbar italienisch. Während farbige Varianten ein optisches Statement setzen, fügt sich die durchgehend schwarze Ausführung nahtlos in jede Motorrad-Lackierung ein — ob Sportler, Naked Bike, Tourer oder Rennmaschine. Das skulptural geformte Multiconic-Profil des Griffs ist zugleich funktional und elegant und führt die Hand ganz natürlich in die richtige Fahrposition, ohne unnötigen optischen Ballast.\u003c\/p\u003e\u003cp\u003eDomino Italy fertigt seit den 1950er-Jahren Präzisions-Gasdrehgriffe und Griffsysteme. Dieses handwerkliche Erbe steckt in jedem A450: Die Gummimischung ist kein generisches Standardgummi von der Stange, sondern eine firmeneigene TPR-Rezeptur, entwickelt über Jahrzehnte an Rückmeldungen aus dem Motorsport und eingesetzt von Werksteams ebenso wie von Privatfahrern in den MotoGP-Nachwuchsklassen und Superbike-Meisterschaften weltweit.\u003c\/p\u003e\u003ch2\u003eLeistung auf Straße und Rennstrecke\u003c\/h2\u003e\u003cp\u003eDie Dual-Compound-Struktur des A450 löst ein grundlegendes Spannungsfeld im Griffdesign: Die äußere Schicht muss weich genug sein, um Vibrationen zu absorbieren und taktiles Feedback zu liefern, während der innere Kern fest genug bleiben muss, um unter Belastung formstabil zu sein. Domino löst dies durch die Kombination zweier unterschiedlicher TPR-Rezepturen, sodass sich der Griff dort zusammendrückt, wo es sinnvoll ist, und dort seine Form hält, wo es nötig ist. Das Ergebnis ist ein Handgriff, der sich bei 200 km\/h spürbar verbunden anfühlt und ebenso komfortabel auf einer dreistündigen Autobahnfahrt ist.\u003c\/p\u003e\u003cp\u003eDie Multiconic-Oberfläche — Dominos patentierte Oberflächengeometrie — erzeugt eine Reihe abgestufter Kontaktzonen entlang des Griffs. Statt eines gleichförmigen Zylinders verjüngt und strukturiert sich das Profil so, dass die Griffkraft gleichmäßig über Handfläche und Finger verteilt wird — das verhindert punktuelle Druckstellen, die auf längeren Fahrten zu Ermüdung der Hände führen.\u003c\/p\u003e\u003ch2\u003ePassform und Kompatibilität\u003c\/h2\u003e\u003cp\u003eDer Domino A450 passt auf alle Motorräder mit Standardlenkern von 22 mm (7\/8 Zoll) oder 25,4 mm (1 Zoll) und ist mit einer Vielzahl von Marken und Modellen kompatibel, unter anderem:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAprilia: RSV4, RSV4 R, RSV4 RR, RSV4 RF, RSV4 1100, RSV4 1100 Factory, RS 660, RS 457, V4, V4 R, V4 S\u003c\/li\u003e\n\u003cli\u003eBMW: S1000RR, M1000RR, HP4, HP4R\u003c\/li\u003e\n\u003cli\u003eDucati: 848, 899, 959, 1199, 1199 S, 1199 R, 1299, 1299 S\u003c\/li\u003e\n\u003cli\u003eHonda: CBR 600 RR, CBR 1000 RR, CBR 1000 RR-R\u003c\/li\u003e\n\u003cli\u003eKawasaki: ZX-6R, ZX-10 R, ZX-10 RR, ZX-4 RR, Ninja 400\u003c\/li\u003e\n\u003cli\u003eKTM: RC 390, RC8 1190, 990 RC R\u003c\/li\u003e\n\u003cli\u003eMV Agusta: F3, F4\u003c\/li\u003e\n\u003cli\u003eSuzuki: GSX-R 600, GSX-R 750, GSX-R 1000\u003c\/li\u003e\n\u003cli\u003eTriumph: Daytona 675, Daytona 675 R, Daytona 765, Daytona 765 Moto 2, Street Triple 765 R, Street Triple 765 RS\u003c\/li\u003e\n\u003cli\u003eYamaha: R1, R1M, R3, R6, R7, R9\u003c\/li\u003e\n\u003cli\u003eEbenfalls kompatibel mit Bimota, CFMOTO, QJMotor und anderen Marken mit Standard-Lenkerdurchmessern\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnische Daten\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eModell: Domino A450\u003c\/li\u003e\n\u003cli\u003eFlanschdurchmesser: 47 mm\u003c\/li\u003e\n\u003cli\u003eLänge: 120 mm \/ 125 mm\u003c\/li\u003e\n\u003cli\u003eLenkerdurchmesser: 22 mm (7\/8 Zoll) und 25,4 mm (1 Zoll)\u003c\/li\u003e\n\u003cli\u003eAußendurchmesser (montiert): 31,5 mm\u003c\/li\u003e\n\u003cli\u003eDrahtsicherungs-Schlitze: 2–3\u003c\/li\u003e\n\u003cli\u003eEndenart: offen\u003c\/li\u003e\n\u003cli\u003eMaterial: Dual-Compound Thermoplastische Gummimischung (TPR)\u003c\/li\u003e\n\u003cli\u003eOberflächenstruktur: Multiconic\u003c\/li\u003e\n\u003cli\u003eLieferumfang: 1 Paar (links und rechts)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Domino","offers":[{"title":"Black","offer_id":53168237478154,"sku":"A45041C4070B7-0","price":16.92,"currency_code":"EUR","in_stock":true},{"title":"Grey","offer_id":53168237510922,"sku":"A45041C5240B7-0","price":16.92,"currency_code":"EUR","in_stock":true},{"title":"Yellow","offer_id":53168237543690,"sku":"A45041C4740B7-0","price":16.92,"currency_code":"EUR","in_stock":true},{"title":"Orange","offer_id":53168237576458,"sku":"A45041C4540B7-0","price":16.92,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":53168237609226,"sku":"A45041C4240B7-0","price":16.92,"currency_code":"EUR","in_stock":true},{"title":"Green","offer_id":53168237641994,"sku":"A45041C4440B7-0","price":16.92,"currency_code":"EUR","in_stock":true},{"title":"Blue","offer_id":53168237674762,"sku":"A45041C4840B7-0","price":16.92,"currency_code":"EUR","in_stock":true},{"title":"White","offer_id":53168237707530,"sku":"A45041C4640B7-0","price":16.92,"currency_code":"EUR","in_stock":true},{"title":"Pink","offer_id":53168237740298,"sku":"A45041C4340B7-0","price":16.92,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/Dominoblack.png?v=1780808484"},{"product_id":"gilles-hg-01-handlebar-grips-aprilia-dorsoduro-1200-2011-2016-hg-01-kit","title":"Gilles HG-01 Handlebar Grips Aprilia DORSODURO 1200 (2011-2016) – HG-01-KIT","description":"\u003cp\u003eOn a supermoto like the Dorsoduro 1200, the rider steers with the whole body and uses the wide bar as a lever, so the grips take a lot of force. Gilles' HG-01 grips are milled from solid aluminium, with a slim, ergonomic profile of 32.5 mm that gives precise feedback when you push the bike into a corner.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThrottle tube with a continuous 25 to 25.7 mm diameter; clutch side 22 to 22.4 mm\u003c\/li\u003e\n\u003cli\u003eMilled from solid aluminium\u003c\/li\u003e\n\u003cli\u003eGood grip with an ergonomic, slim shape\u003c\/li\u003e\n\u003cli\u003eClamping mechanism for quick fitting\u003c\/li\u003e\n\u003cli\u003eOuter diameter 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eRegistration: no Gilles entry, ask us\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eType TV\u003c\/h2\u003e\n\u003cp\u003eGilles lists the SMV 1200 Dorsoduro from 2011 to 2016. The grips come in silver.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eGilles' fitment list has no registration entry for the HG-01 grips on the Aprilia DORSODURO 1200, so we cannot quote a Gilles statement on road use here. What matters in any case: the throttle must turn freely and return to closed on its own, and the switches must stay fully usable. If you need a definite answer for your motorcycle, ask us before ordering.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eOne pair of Gilles HG-01 handlebar grips in silver, for the throttle side and the clutch side.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eRemove the original grips and clean the throttle tube and the handlebar. Check the diameters first: the throttle tube needs a continuous 25 to 25.7 mm, the clutch side 22 to 22.4 mm; plastic ribs on some throttle tubes may have to be removed, at your own discretion, according to Gilles. Fit the grips with their clamping mechanism, leave a small gap to the switch housing and check that the throttle turns freely and snaps back on its own.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Gilles Tooling\u003c\/li\u003e\n\u003cli\u003eSeries: HG-01\u003c\/li\u003e\n\u003cli\u003ePart number: HG-01-KIT\u003c\/li\u003e\n\u003cli\u003eType: Handlebar grips, pair\u003c\/li\u003e\n\u003cli\u003eMaterial: Aluminium, milled from solid\u003c\/li\u003e\n\u003cli\u003eDimensions: Ø 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eThrottle side: Throttle tube Ø 25–25.7 mm, continuous\u003c\/li\u003e\n\u003cli\u003eClutch side: Handlebar Ø 22–22.4 mm, continuous\u003c\/li\u003e\n\u003cli\u003eFitment: Aprilia DORSODURO 1200 (2011–2016)\u003c\/li\u003e\n\u003cli\u003eRoad approval: No entry in the Gilles list\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gilles Tooling","offers":[{"title":"Default Title","offer_id":53784057479434,"sku":"HG-01-KIT","price":61.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/HG-01-KIT_1.png?v=1790025259"},{"product_id":"gilles-hg-01-handlebar-grips-aprilia-dorsoduro-750-2007-2016-hg-01-kit","title":"Gilles HG-01 Handlebar Grips Aprilia DORSODURO 750 (2007-2016) – HG-01-KIT","description":"\u003cp\u003eThe Dorsoduro 750 has an electronic throttle, so changing the grips does not involve throttle cables. What matters is the throttle tube: Gilles' HG-01 needs a continuous 25 to 25.7 mm on the right and 22 to 22.4 mm on the left. On the Dorsoduro, the silver aluminium grips replace the rubber originals and add a machined look to the supermoto bar.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThrottle tube with a continuous 25 to 25.7 mm diameter; clutch side 22 to 22.4 mm\u003c\/li\u003e\n\u003cli\u003eGood grip with an ergonomic, slim shape\u003c\/li\u003e\n\u003cli\u003eClamping mechanism for quick fitting\u003c\/li\u003e\n\u003cli\u003eOuter diameter 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eNot for inch handlebars or bikes with heated grips\u003c\/li\u003e\n\u003cli\u003eRegistration: no Gilles entry, ask us\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eType SM\u003c\/h2\u003e\n\u003cp\u003eListed for 2007 to 2016.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eFor the Aprilia DORSODURO 750, Gilles gives no registration information for these grips. We therefore make no claim about approval; ask us if you need one for your bike. After fitting, check that the throttle snaps back by itself at every handlebar position.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eOne pair of Gilles HG-01 handlebar grips in silver, for the throttle side and the clutch side.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eBefore fitting, make sure your bike has no heated grips and no inch handlebar; the HG-01 does not fit either. Slide the grips on, tighten the clamping mechanism evenly and check the throttle at full lock in both directions: it must return to closed by itself.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Gilles Tooling\u003c\/li\u003e\n\u003cli\u003eSeries: HG-01\u003c\/li\u003e\n\u003cli\u003ePart number: HG-01-KIT\u003c\/li\u003e\n\u003cli\u003eType: Handlebar grips, pair\u003c\/li\u003e\n\u003cli\u003eMaterial: Aluminium, milled from solid\u003c\/li\u003e\n\u003cli\u003eDimensions: Ø 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eThrottle side: Throttle tube Ø 25–25.7 mm, continuous\u003c\/li\u003e\n\u003cli\u003eClutch side: Handlebar Ø 22–22.4 mm, continuous\u003c\/li\u003e\n\u003cli\u003eFitment: Aprilia DORSODURO 750 (2007–2016)\u003c\/li\u003e\n\u003cli\u003eRoad approval: No entry in the Gilles list\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gilles Tooling","offers":[{"title":"Default Title","offer_id":53784057643274,"sku":"HG-01-KIT","price":61.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/HG-01-KIT_1_f8d0069c-baf7-463d-b6d1-7dc7adbcf1f8.png?v=1790025264"},{"product_id":"gilles-hg-01-handlebar-grips-aprilia-mana-850-gt-2007-2016-hg-01-kit","title":"Gilles HG-01 Handlebar Grips Aprilia MANA 850 GT (2007-2016) – HG-01-KIT","description":"\u003cp\u003eThe Mana 850 GT is a comfortable tourer with an automatic transmission, and its riders often spend whole days on it. Gilles' HG-01 grips give the handlebar a more sporting feel: milled aluminium, 118 mm long, in a slim shape that sits well in the hand. Because metal feels cooler than rubber on a cold morning, riding gloves are a good idea.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThrottle tube with a continuous 25 to 25.7 mm diameter; clutch side 22 to 22.4 mm\u003c\/li\u003e\n\u003cli\u003eClamping mechanism for quick fitting\u003c\/li\u003e\n\u003cli\u003eOuter diameter 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eNot for inch handlebars or bikes with heated grips\u003c\/li\u003e\n\u003cli\u003eMilled from solid aluminium\u003c\/li\u003e\n\u003cli\u003eRegistration: no Gilles entry, ask us\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eType RC\u003c\/h2\u003e\n\u003cp\u003eGilles lists the NA 850 Mana and Mana GT from 2007 to 2016.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eGilles lists the HG-01 for the Aprilia MANA 850 GT without any statement on registration. Please contact us if you need clarification for road use. Whatever the paperwork, the throttle must close by itself and the controls must remain easy to reach.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eThe HG-01 grip set: two milled aluminium grips with their clamping mechanism, silver.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eTake the old grips off, clean everything and measure the throttle tube. Mount the Gilles grips, tighten the clamps and test the throttle several times before riding. If the throttle does not snap back freely, correct the position before the first ride.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Gilles Tooling\u003c\/li\u003e\n\u003cli\u003eSeries: HG-01\u003c\/li\u003e\n\u003cli\u003ePart number: HG-01-KIT\u003c\/li\u003e\n\u003cli\u003eType: Handlebar grips, pair\u003c\/li\u003e\n\u003cli\u003eMaterial: Aluminium, milled from solid\u003c\/li\u003e\n\u003cli\u003eDimensions: Ø 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eThrottle side: Throttle tube Ø 25–25.7 mm, continuous\u003c\/li\u003e\n\u003cli\u003eClutch side: Handlebar Ø 22–22.4 mm, continuous\u003c\/li\u003e\n\u003cli\u003eFitment: Aprilia MANA 850 GT (2007–2016)\u003c\/li\u003e\n\u003cli\u003eRoad approval: No entry in the Gilles list\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gilles Tooling","offers":[{"title":"Default Title","offer_id":53784057708810,"sku":"HG-01-KIT","price":61.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/HG-01-KIT_1_ec14a83a-b0af-4e8a-a30a-4f82bfda57fa.png?v=1790025268"},{"product_id":"gilles-hg-01-handlebar-grips-aprilia-shiver-750-2009-2016-hg-01-kit","title":"Gilles HG-01 Handlebar Grips Aprilia SHIVER 750 (2009-2016) – HG-01-KIT","description":"\u003cp\u003eThe Shiver 750 is a sporty naked V-twin with a tubular handlebar and nothing in front of it, so every part of the cockpit is on show. Gilles' HG-01 grips turn the most-touched part into a detail: silver, milled from a solid block of aluminium and held by a clamping mechanism that makes fitting quick.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThrottle tube with a continuous 25 to 25.7 mm diameter; clutch side 22 to 22.4 mm\u003c\/li\u003e\n\u003cli\u003eOuter diameter 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eNot for inch handlebars or bikes with heated grips\u003c\/li\u003e\n\u003cli\u003eMilled from solid aluminium\u003c\/li\u003e\n\u003cli\u003eGood grip with an ergonomic, slim shape\u003c\/li\u003e\n\u003cli\u003eRegistration: no Gilles entry, ask us\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eType RA\u003c\/h2\u003e\n\u003cp\u003eListed for 2009 to 2016. The Shiver 750 GT has its own page.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eGilles' fitment list has no registration entry for the HG-01 grips on the Aprilia SHIVER 750, so we cannot quote a Gilles statement on road use here. What matters in any case: the throttle must turn freely and return to closed on its own, and the switches must stay fully usable. If you need a definite answer for your motorcycle, ask us before ordering.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eThe HG-01 grip set: two milled aluminium grips with their clamping mechanism, silver.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eRemove the original grips and clean the throttle tube and the handlebar. Check the diameters first: the throttle tube needs a continuous 25 to 25.7 mm, the clutch side 22 to 22.4 mm; plastic ribs on some throttle tubes may have to be removed, at your own discretion, according to Gilles. Fit the grips with their clamping mechanism, leave a small gap to the switch housing and check that the throttle turns freely and snaps back on its own.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Gilles Tooling\u003c\/li\u003e\n\u003cli\u003eSeries: HG-01\u003c\/li\u003e\n\u003cli\u003ePart number: HG-01-KIT\u003c\/li\u003e\n\u003cli\u003eType: Handlebar grips, pair\u003c\/li\u003e\n\u003cli\u003eMaterial: Aluminium, milled from solid\u003c\/li\u003e\n\u003cli\u003eDimensions: Ø 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eThrottle side: Throttle tube Ø 25–25.7 mm, continuous\u003c\/li\u003e\n\u003cli\u003eClutch side: Handlebar Ø 22–22.4 mm, continuous\u003c\/li\u003e\n\u003cli\u003eFitment: Aprilia SHIVER 750 (2009–2016)\u003c\/li\u003e\n\u003cli\u003eRoad approval: No entry in the Gilles list\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gilles Tooling","offers":[{"title":"Default Title","offer_id":53784057938186,"sku":"HG-01-KIT","price":61.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/HG-01-KIT_1_25e19e59-9e36-4b30-9dd8-f283fdc934cd.png?v=1790025273"},{"product_id":"gilles-hg-01-handlebar-grips-aprilia-shiver-750-gt-2009-2016-hg-01-kit","title":"Gilles HG-01 Handlebar Grips Aprilia SHIVER 750 GT (2009-2016) – HG-01-KIT","description":"\u003cp\u003eThe Shiver 750 GT adds a half fairing to Aprilia's naked twin for longer rides. Before ordering Gilles' HG-01, check whether a previous owner has fitted heated grips, a popular accessory on touring bikes: Gilles does not recommend the HG-01 for bikes with heated grips. On a standard GT, the aluminium grips replace the rubber ones with a 32.5 mm outer diameter.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThrottle tube with a continuous 25 to 25.7 mm diameter; clutch side 22 to 22.4 mm\u003c\/li\u003e\n\u003cli\u003eNot for inch handlebars or bikes with heated grips\u003c\/li\u003e\n\u003cli\u003eMilled from solid aluminium\u003c\/li\u003e\n\u003cli\u003eGood grip with an ergonomic, slim shape\u003c\/li\u003e\n\u003cli\u003eClamping mechanism for quick fitting\u003c\/li\u003e\n\u003cli\u003eRegistration: no Gilles entry, ask us\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eType RA\u003c\/h2\u003e\n\u003cp\u003eGilles lists the SL 750 Shiver GT from 2009 to 2016.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eFor the Aprilia SHIVER 750 GT, Gilles gives no registration information for these grips. We therefore make no claim about approval; ask us if you need one for your bike. After fitting, check that the throttle snaps back by itself at every handlebar position.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eA pair of HG-01 grips in silver, ready to fit with the integrated clamping mechanism.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eBefore fitting, make sure your bike has no heated grips and no inch handlebar; the HG-01 does not fit either. Slide the grips on, tighten the clamping mechanism evenly and check the throttle at full lock in both directions: it must return to closed by itself.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Gilles Tooling\u003c\/li\u003e\n\u003cli\u003eSeries: HG-01\u003c\/li\u003e\n\u003cli\u003ePart number: HG-01-KIT\u003c\/li\u003e\n\u003cli\u003eType: Handlebar grips, pair\u003c\/li\u003e\n\u003cli\u003eMaterial: Aluminium, milled from solid\u003c\/li\u003e\n\u003cli\u003eDimensions: Ø 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eThrottle side: Throttle tube Ø 25–25.7 mm, continuous\u003c\/li\u003e\n\u003cli\u003eClutch side: Handlebar Ø 22–22.4 mm, continuous\u003c\/li\u003e\n\u003cli\u003eFitment: Aprilia SHIVER 750 GT (2009–2016)\u003c\/li\u003e\n\u003cli\u003eRoad approval: No entry in the Gilles list\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gilles Tooling","offers":[{"title":"Default Title","offer_id":53784057970954,"sku":"HG-01-KIT","price":61.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/HG-01-KIT_1_70288b64-f1d4-4d04-b5dc-24671dbffdc9.png?v=1790025278"},{"product_id":"gilles-hg-01-handlebar-grips-ducati-monster-1100-2009-2015-hg-01-kit","title":"Gilles HG-01 Handlebar Grips Ducati MONSTER 1100 (2009-2015) – HG-01-KIT","description":"\u003cp\u003eThe Monster 1100 is the last big Monster with an air-cooled two-valve Desmo twin, and its character is felt through the handlebar. Gilles' HG-01 grips are milled from solid aluminium and have a slim, ergonomic shape with good grip; in silver they suit the bike's exposed trellis frame and engine.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThrottle tube with a continuous 25 to 25.7 mm diameter; clutch side 22 to 22.4 mm\u003c\/li\u003e\n\u003cli\u003eMilled from solid aluminium\u003c\/li\u003e\n\u003cli\u003eGood grip with an ergonomic, slim shape\u003c\/li\u003e\n\u003cli\u003eClamping mechanism for quick fitting\u003c\/li\u003e\n\u003cli\u003eOuter diameter 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eRegistration: no Gilles entry, ask us\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eM5 \/ 02\u003c\/h2\u003e\n\u003cp\u003eListed for 2009 to 2015.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eGilles lists the HG-01 for the Ducati MONSTER 1100 without any statement on registration. Please contact us if you need clarification for road use. Whatever the paperwork, the throttle must close by itself and the controls must remain easy to reach.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eA pair of HG-01 grips in silver, ready to fit with the integrated clamping mechanism.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eTake the old grips off, clean everything and measure the throttle tube. Mount the Gilles grips, tighten the clamps and test the throttle several times before riding. If the throttle does not snap back freely, correct the position before the first ride.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Gilles Tooling\u003c\/li\u003e\n\u003cli\u003eSeries: HG-01\u003c\/li\u003e\n\u003cli\u003ePart number: HG-01-KIT\u003c\/li\u003e\n\u003cli\u003eType: Handlebar grips, pair\u003c\/li\u003e\n\u003cli\u003eMaterial: Aluminium, milled from solid\u003c\/li\u003e\n\u003cli\u003eDimensions: Ø 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eThrottle side: Throttle tube Ø 25–25.7 mm, continuous\u003c\/li\u003e\n\u003cli\u003eClutch side: Handlebar Ø 22–22.4 mm, continuous\u003c\/li\u003e\n\u003cli\u003eFitment: Ducati MONSTER 1100 (2009–2015)\u003c\/li\u003e\n\u003cli\u003eRoad approval: No entry in the Gilles list\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gilles Tooling","offers":[{"title":"Default Title","offer_id":53784058167562,"sku":"HG-01-KIT","price":61.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/HG-01-KIT_1_2f962281-8d0f-4164-976f-eddb9fa268b0.png?v=1790025283"},{"product_id":"gilles-hg-01-handlebar-grips-ducati-monster-1200-2014-2016-hg-01-kit","title":"Gilles HG-01 Handlebar Grips Ducati MONSTER 1200 (2014-2016) – HG-01-KIT","description":"\u003cp\u003eWith the liquid-cooled Testastretta engine and riding modes, the Monster 1200 of 2014 brought the Monster into the modern age. Gilles' HG-01 grips give its cockpit a machined, high-quality touch: 118 mm long, 32.5 mm in diameter, silver aluminium with a clamping mechanism that holds them in place.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThrottle tube with a continuous 25 to 25.7 mm diameter; clutch side 22 to 22.4 mm\u003c\/li\u003e\n\u003cli\u003eGood grip with an ergonomic, slim shape\u003c\/li\u003e\n\u003cli\u003eClamping mechanism for quick fitting\u003c\/li\u003e\n\u003cli\u003eOuter diameter 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eNot for inch handlebars or bikes with heated grips\u003c\/li\u003e\n\u003cli\u003eRegistration: no Gilles entry, ask us\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eType M6\u003c\/h2\u003e\n\u003cp\u003eGilles lists the Monster 1200 from 2014 to 2016. The 1200 R has its own page.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eGilles' fitment list has no registration entry for the HG-01 grips on the Ducati MONSTER 1200, so we cannot quote a Gilles statement on road use here. What matters in any case: the throttle must turn freely and return to closed on its own, and the switches must stay fully usable. If you need a definite answer for your motorcycle, ask us before ordering.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eOne pair of Gilles HG-01 handlebar grips in silver, for the throttle side and the clutch side.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eRemove the original grips and clean the throttle tube and the handlebar. Check the diameters first: the throttle tube needs a continuous 25 to 25.7 mm, the clutch side 22 to 22.4 mm; plastic ribs on some throttle tubes may have to be removed, at your own discretion, according to Gilles. Fit the grips with their clamping mechanism, leave a small gap to the switch housing and check that the throttle turns freely and snaps back on its own.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Gilles Tooling\u003c\/li\u003e\n\u003cli\u003eSeries: HG-01\u003c\/li\u003e\n\u003cli\u003ePart number: HG-01-KIT\u003c\/li\u003e\n\u003cli\u003eType: Handlebar grips, pair\u003c\/li\u003e\n\u003cli\u003eMaterial: Aluminium, milled from solid\u003c\/li\u003e\n\u003cli\u003eDimensions: Ø 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eThrottle side: Throttle tube Ø 25–25.7 mm, continuous\u003c\/li\u003e\n\u003cli\u003eClutch side: Handlebar Ø 22–22.4 mm, continuous\u003c\/li\u003e\n\u003cli\u003eFitment: Ducati MONSTER 1200 (2014–2016)\u003c\/li\u003e\n\u003cli\u003eRoad approval: No entry in the Gilles list\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gilles Tooling","offers":[{"title":"Default Title","offer_id":53784058298634,"sku":"HG-01-KIT","price":61.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/HG-01-KIT_1_145a4cb3-0c67-4ecc-9f12-a7ef60ffcf9c.png?v=1790025287"},{"product_id":"gilles-hg-01-handlebar-grips-ducati-monster-1200-r-2016-2020-hg-01-kit","title":"Gilles HG-01 Handlebar Grips Ducati MONSTER 1200 R (2016-2020) – HG-01-KIT","description":"\u003cp\u003eThe Monster 1200 R is the most powerful Monster of its generation, with Öhlins suspension and a lot of torque that has to be dosed carefully with the right hand. Slim grips help there: Gilles' HG-01 are milled from aluminium and shaped so that small throttle movements stay precise. They are supplied in silver.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThrottle tube with a continuous 25 to 25.7 mm diameter; clutch side 22 to 22.4 mm\u003c\/li\u003e\n\u003cli\u003eClamping mechanism for quick fitting\u003c\/li\u003e\n\u003cli\u003eOuter diameter 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eNot for inch handlebars or bikes with heated grips\u003c\/li\u003e\n\u003cli\u003eMilled from solid aluminium\u003c\/li\u003e\n\u003cli\u003eRegistration: no Gilles entry, ask us\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eType MY\u003c\/h2\u003e\n\u003cp\u003eListed for 2016 to 2020.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eFor the Ducati MONSTER 1200 R, Gilles gives no registration information for these grips. We therefore make no claim about approval; ask us if you need one for your bike. After fitting, check that the throttle snaps back by itself at every handlebar position.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eOne pair of Gilles HG-01 handlebar grips in silver, for the throttle side and the clutch side.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eBefore fitting, make sure your bike has no heated grips and no inch handlebar; the HG-01 does not fit either. Slide the grips on, tighten the clamping mechanism evenly and check the throttle at full lock in both directions: it must return to closed by itself.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Gilles Tooling\u003c\/li\u003e\n\u003cli\u003eSeries: HG-01\u003c\/li\u003e\n\u003cli\u003ePart number: HG-01-KIT\u003c\/li\u003e\n\u003cli\u003eType: Handlebar grips, pair\u003c\/li\u003e\n\u003cli\u003eMaterial: Aluminium, milled from solid\u003c\/li\u003e\n\u003cli\u003eDimensions: Ø 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eThrottle side: Throttle tube Ø 25–25.7 mm, continuous\u003c\/li\u003e\n\u003cli\u003eClutch side: Handlebar Ø 22–22.4 mm, continuous\u003c\/li\u003e\n\u003cli\u003eFitment: Ducati MONSTER 1200 R (2016–2020)\u003c\/li\u003e\n\u003cli\u003eRoad approval: No entry in the Gilles list\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gilles Tooling","offers":[{"title":"Default Title","offer_id":53784058396938,"sku":"HG-01-KIT","price":61.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/HG-01-KIT_1_dfffeb1e-6dbc-49ba-8f6c-13b65c59e79e.png?v=1790025292"},{"product_id":"gilles-hg-01-handlebar-grips-ducati-monster-821-2014-2020-hg-01-kit","title":"Gilles HG-01 Handlebar Grips Ducati MONSTER 821 (2014-2020) – HG-01-KIT","description":"\u003cp\u003eFor many riders, the Monster 821 is their first Ducati, and Ducati owners like to make their bikes individual. Aluminium grips are a classic step: Gilles' HG-01 are machined from solid material, fitted with a clamping mechanism and finished in silver. On the right, they need a throttle tube with a continuous 25 to 25.7 mm.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThrottle tube with a continuous 25 to 25.7 mm diameter; clutch side 22 to 22.4 mm\u003c\/li\u003e\n\u003cli\u003eOuter diameter 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eNot for inch handlebars or bikes with heated grips\u003c\/li\u003e\n\u003cli\u003eMilled from solid aluminium\u003c\/li\u003e\n\u003cli\u003eGood grip with an ergonomic, slim shape\u003c\/li\u003e\n\u003cli\u003eRegistration: no Gilles entry, ask us\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eType M6\u003c\/h2\u003e\n\u003cp\u003eListed for 2014 to 2020.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eGilles lists the HG-01 for the Ducati MONSTER 821 without any statement on registration. Please contact us if you need clarification for road use. Whatever the paperwork, the throttle must close by itself and the controls must remain easy to reach.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eThe HG-01 grip set: two milled aluminium grips with their clamping mechanism, silver.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eTake the old grips off, clean everything and measure the throttle tube. Mount the Gilles grips, tighten the clamps and test the throttle several times before riding. If the throttle does not snap back freely, correct the position before the first ride.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Gilles Tooling\u003c\/li\u003e\n\u003cli\u003eSeries: HG-01\u003c\/li\u003e\n\u003cli\u003ePart number: HG-01-KIT\u003c\/li\u003e\n\u003cli\u003eType: Handlebar grips, pair\u003c\/li\u003e\n\u003cli\u003eMaterial: Aluminium, milled from solid\u003c\/li\u003e\n\u003cli\u003eDimensions: Ø 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eThrottle side: Throttle tube Ø 25–25.7 mm, continuous\u003c\/li\u003e\n\u003cli\u003eClutch side: Handlebar Ø 22–22.4 mm, continuous\u003c\/li\u003e\n\u003cli\u003eFitment: Ducati MONSTER 821 (2014–2020)\u003c\/li\u003e\n\u003cli\u003eRoad approval: No entry in the Gilles list\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gilles Tooling","offers":[{"title":"Default Title","offer_id":53784058593546,"sku":"HG-01-KIT","price":61.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/HG-01-KIT_1_c15ab1ab-e9f3-4bd3-87e0-23ef4df2f19e.png?v=1790025297"},{"product_id":"gilles-hg-01-handlebar-grips-ducati-multistrada-1200-2015-2017-hg-01-kit","title":"Gilles HG-01 Handlebar Grips Ducati MULTISTRADA 1200 (2015-2017) – HG-01-KIT","description":"\u003cp\u003eMany Multistrada 1200 models are sold with touring packages that include heated grips, and Gilles does not recommend the HG-01 for bikes with heated grips. On a Multistrada without them, the milled aluminium grips replace the standard rubber: 32.5 mm in diameter and 118 mm long, silver, with a clamping mechanism for fitting.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThrottle tube with a continuous 25 to 25.7 mm diameter; clutch side 22 to 22.4 mm\u003c\/li\u003e\n\u003cli\u003eNot for inch handlebars or bikes with heated grips\u003c\/li\u003e\n\u003cli\u003eMilled from solid aluminium\u003c\/li\u003e\n\u003cli\u003eGood grip with an ergonomic, slim shape\u003c\/li\u003e\n\u003cli\u003eClamping mechanism for quick fitting\u003c\/li\u003e\n\u003cli\u003eRegistration: no Gilles entry, ask us\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eType AA\u003c\/h2\u003e\n\u003cp\u003eGilles lists the Multistrada 1200 with DVT engine from 2015 to 2017.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eGilles' fitment list has no registration entry for the HG-01 grips on the Ducati MULTISTRADA 1200, so we cannot quote a Gilles statement on road use here. What matters in any case: the throttle must turn freely and return to closed on its own, and the switches must stay fully usable. If you need a definite answer for your motorcycle, ask us before ordering.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eThe HG-01 grip set: two milled aluminium grips with their clamping mechanism, silver.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eRemove the original grips and clean the throttle tube and the handlebar. Check the diameters first: the throttle tube needs a continuous 25 to 25.7 mm, the clutch side 22 to 22.4 mm; plastic ribs on some throttle tubes may have to be removed, at your own discretion, according to Gilles. Fit the grips with their clamping mechanism, leave a small gap to the switch housing and check that the throttle turns freely and snaps back on its own.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Gilles Tooling\u003c\/li\u003e\n\u003cli\u003eSeries: HG-01\u003c\/li\u003e\n\u003cli\u003ePart number: HG-01-KIT\u003c\/li\u003e\n\u003cli\u003eType: Handlebar grips, pair\u003c\/li\u003e\n\u003cli\u003eMaterial: Aluminium, milled from solid\u003c\/li\u003e\n\u003cli\u003eDimensions: Ø 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eThrottle side: Throttle tube Ø 25–25.7 mm, continuous\u003c\/li\u003e\n\u003cli\u003eClutch side: Handlebar Ø 22–22.4 mm, continuous\u003c\/li\u003e\n\u003cli\u003eFitment: Ducati MULTISTRADA 1200 (2015–2017)\u003c\/li\u003e\n\u003cli\u003eRoad approval: No entry in the Gilles list\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gilles Tooling","offers":[{"title":"Default Title","offer_id":53784058626314,"sku":"HG-01-KIT","price":61.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/HG-01-KIT_1_becaf977-2591-434d-9b31-04056e74ef01.png?v=1790025301"},{"product_id":"gilles-hg-01-handlebar-grips-ducati-panigale-1299-2015-2017-hg-01-kit","title":"Gilles HG-01 Handlebar Grips Ducati Panigale 1299 (2015-2017) – HG-01-KIT","description":"\u003cp\u003eThe 1299 Panigale's Superquadro twin produces a lot of power, and on the clip-ons the grips are where the rider meters it out. Gilles' HG-01 grips are made for that kind of precision: milled from solid aluminium, slim, with a surface that offers good grip. The silver finish contrasts with Ducati red.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThrottle tube with a continuous 25 to 25.7 mm diameter; clutch side 22 to 22.4 mm\u003c\/li\u003e\n\u003cli\u003eMilled from solid aluminium\u003c\/li\u003e\n\u003cli\u003eGood grip with an ergonomic, slim shape\u003c\/li\u003e\n\u003cli\u003eClamping mechanism for quick fitting\u003c\/li\u003e\n\u003cli\u003eOuter diameter 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eRegistration: no Gilles entry, ask us\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eType H9\u003c\/h2\u003e\n\u003cp\u003eListed for 2015 to 2017. The 1299 Panigale S has its own page.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eFor the Ducati Panigale 1299, Gilles gives no registration information for these grips. We therefore make no claim about approval; ask us if you need one for your bike. After fitting, check that the throttle snaps back by itself at every handlebar position.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eA pair of HG-01 grips in silver, ready to fit with the integrated clamping mechanism.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eBefore fitting, make sure your bike has no heated grips and no inch handlebar; the HG-01 does not fit either. Slide the grips on, tighten the clamping mechanism evenly and check the throttle at full lock in both directions: it must return to closed by itself.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Gilles Tooling\u003c\/li\u003e\n\u003cli\u003eSeries: HG-01\u003c\/li\u003e\n\u003cli\u003ePart number: HG-01-KIT\u003c\/li\u003e\n\u003cli\u003eType: Handlebar grips, pair\u003c\/li\u003e\n\u003cli\u003eMaterial: Aluminium, milled from solid\u003c\/li\u003e\n\u003cli\u003eDimensions: Ø 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eThrottle side: Throttle tube Ø 25–25.7 mm, continuous\u003c\/li\u003e\n\u003cli\u003eClutch side: Handlebar Ø 22–22.4 mm, continuous\u003c\/li\u003e\n\u003cli\u003eFitment: Ducati Panigale 1299 (2015–2017)\u003c\/li\u003e\n\u003cli\u003eRoad approval: No entry in the Gilles list\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gilles Tooling","offers":[{"title":"Default Title","offer_id":53784058822922,"sku":"HG-01-KIT","price":61.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/HG-01-KIT_1_07307fee-b2d8-4cea-b849-b59f8cfb7e85.png?v=1790025306"},{"product_id":"gilles-hg-01-handlebar-grips-ducati-panigale-1299-s-2015-2017-hg-01-kit","title":"Gilles HG-01 Handlebar Grips Ducati Panigale 1299 S (2015-2017) – HG-01-KIT","description":"\u003cp\u003eThe S version of the 1299 Panigale adds semi-active Öhlins suspension, and its riders tend to value feedback from the front wheel. That feedback reaches the hands through the grips, and Gilles' HG-01 grips transmit it directly: aluminium instead of soft rubber, 32.5 mm outer diameter, fitted with a clamping mechanism.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThrottle tube with a continuous 25 to 25.7 mm diameter; clutch side 22 to 22.4 mm\u003c\/li\u003e\n\u003cli\u003eGood grip with an ergonomic, slim shape\u003c\/li\u003e\n\u003cli\u003eClamping mechanism for quick fitting\u003c\/li\u003e\n\u003cli\u003eOuter diameter 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eNot for inch handlebars or bikes with heated grips\u003c\/li\u003e\n\u003cli\u003eRegistration: no Gilles entry, ask us\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eType H9\u003c\/h2\u003e\n\u003cp\u003eListed for 2015 to 2017.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eGilles lists the HG-01 for the Ducati Panigale 1299 S without any statement on registration. Please contact us if you need clarification for road use. Whatever the paperwork, the throttle must close by itself and the controls must remain easy to reach.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eA pair of HG-01 grips in silver, ready to fit with the integrated clamping mechanism.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eTake the old grips off, clean everything and measure the throttle tube. Mount the Gilles grips, tighten the clamps and test the throttle several times before riding. If the throttle does not snap back freely, correct the position before the first ride.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Gilles Tooling\u003c\/li\u003e\n\u003cli\u003eSeries: HG-01\u003c\/li\u003e\n\u003cli\u003ePart number: HG-01-KIT\u003c\/li\u003e\n\u003cli\u003eType: Handlebar grips, pair\u003c\/li\u003e\n\u003cli\u003eMaterial: Aluminium, milled from solid\u003c\/li\u003e\n\u003cli\u003eDimensions: Ø 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eThrottle side: Throttle tube Ø 25–25.7 mm, continuous\u003c\/li\u003e\n\u003cli\u003eClutch side: Handlebar Ø 22–22.4 mm, continuous\u003c\/li\u003e\n\u003cli\u003eFitment: Ducati Panigale 1299 S (2015–2017)\u003c\/li\u003e\n\u003cli\u003eRoad approval: No entry in the Gilles list\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gilles Tooling","offers":[{"title":"Default Title","offer_id":53784058953994,"sku":"HG-01-KIT","price":61.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/HG-01-KIT_1_444358a1-f509-4ead-8a63-c56b7803bf58.png?v=1790025311"},{"product_id":"gilles-hg-01-handlebar-grips-ducati-panigale-899-2014-2016-hg-01-kit","title":"Gilles HG-01 Handlebar Grips Ducati Panigale 899 (2014-2016) – HG-01-KIT","description":"\u003cp\u003eThe 899 Panigale was Ducati's middleweight superbike, lighter and more forgiving than the 1199 and very popular for track days. Gilles' HG-01 grips suit it: milled aluminium in silver, 118 mm long, with an ergonomic profile. Check before fitting that the throttle tube has a continuous diameter of 25 to 25.7 mm.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThrottle tube with a continuous 25 to 25.7 mm diameter; clutch side 22 to 22.4 mm\u003c\/li\u003e\n\u003cli\u003eClamping mechanism for quick fitting\u003c\/li\u003e\n\u003cli\u003eOuter diameter 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eNot for inch handlebars or bikes with heated grips\u003c\/li\u003e\n\u003cli\u003eMilled from solid aluminium\u003c\/li\u003e\n\u003cli\u003eRegistration: no Gilles entry, ask us\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eType H8\u003c\/h2\u003e\n\u003cp\u003eGilles lists the 899 Panigale from 2014 to 2016.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eGilles' fitment list has no registration entry for the HG-01 grips on the Ducati Panigale 899, so we cannot quote a Gilles statement on road use here. What matters in any case: the throttle must turn freely and return to closed on its own, and the switches must stay fully usable. If you need a definite answer for your motorcycle, ask us before ordering.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eOne pair of Gilles HG-01 handlebar grips in silver, for the throttle side and the clutch side.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eRemove the original grips and clean the throttle tube and the handlebar. Check the diameters first: the throttle tube needs a continuous 25 to 25.7 mm, the clutch side 22 to 22.4 mm; plastic ribs on some throttle tubes may have to be removed, at your own discretion, according to Gilles. Fit the grips with their clamping mechanism, leave a small gap to the switch housing and check that the throttle turns freely and snaps back on its own.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Gilles Tooling\u003c\/li\u003e\n\u003cli\u003eSeries: HG-01\u003c\/li\u003e\n\u003cli\u003ePart number: HG-01-KIT\u003c\/li\u003e\n\u003cli\u003eType: Handlebar grips, pair\u003c\/li\u003e\n\u003cli\u003eMaterial: Aluminium, milled from solid\u003c\/li\u003e\n\u003cli\u003eDimensions: Ø 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eThrottle side: Throttle tube Ø 25–25.7 mm, continuous\u003c\/li\u003e\n\u003cli\u003eClutch side: Handlebar Ø 22–22.4 mm, continuous\u003c\/li\u003e\n\u003cli\u003eFitment: Ducati Panigale 899 (2014–2016)\u003c\/li\u003e\n\u003cli\u003eRoad approval: No entry in the Gilles list\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gilles Tooling","offers":[{"title":"Default Title","offer_id":53784059085066,"sku":"HG-01-KIT","price":61.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/HG-01-KIT_1_fc93107b-f311-4e8c-8e79-bcd00ed00ee3.png?v=1790025315"},{"product_id":"gilles-hg-01-handlebar-grips-ducati-panigale-959-2016-2020-hg-01-kit","title":"Gilles HG-01 Handlebar Grips Ducati Panigale 959 (2016-2020) – HG-01-KIT","description":"\u003cp\u003eThe 959 Panigale replaced the 899 in 2016 with a longer-stroke engine and the characteristic stacked silencers on the right. On its clip-ons, Gilles' HG-01 grips replace the rubber originals with silver aluminium, machined from solid, 32.5 mm thick and clamped in place.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThrottle tube with a continuous 25 to 25.7 mm diameter; clutch side 22 to 22.4 mm\u003c\/li\u003e\n\u003cli\u003eOuter diameter 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eNot for inch handlebars or bikes with heated grips\u003c\/li\u003e\n\u003cli\u003eMilled from solid aluminium\u003c\/li\u003e\n\u003cli\u003eGood grip with an ergonomic, slim shape\u003c\/li\u003e\n\u003cli\u003eRegistration: no Gilles entry, ask us\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHA and HB\u003c\/h2\u003e\n\u003cp\u003eListed for 2016 to 2020.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eFor the Ducati Panigale 959, Gilles gives no registration information for these grips. We therefore make no claim about approval; ask us if you need one for your bike. After fitting, check that the throttle snaps back by itself at every handlebar position.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eOne pair of Gilles HG-01 handlebar grips in silver, for the throttle side and the clutch side.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eBefore fitting, make sure your bike has no heated grips and no inch handlebar; the HG-01 does not fit either. Slide the grips on, tighten the clamping mechanism evenly and check the throttle at full lock in both directions: it must return to closed by itself.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Gilles Tooling\u003c\/li\u003e\n\u003cli\u003eSeries: HG-01\u003c\/li\u003e\n\u003cli\u003ePart number: HG-01-KIT\u003c\/li\u003e\n\u003cli\u003eType: Handlebar grips, pair\u003c\/li\u003e\n\u003cli\u003eMaterial: Aluminium, milled from solid\u003c\/li\u003e\n\u003cli\u003eDimensions: Ø 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eThrottle side: Throttle tube Ø 25–25.7 mm, continuous\u003c\/li\u003e\n\u003cli\u003eClutch side: Handlebar Ø 22–22.4 mm, continuous\u003c\/li\u003e\n\u003cli\u003eFitment: Ducati Panigale 959 (2016–2020)\u003c\/li\u003e\n\u003cli\u003eRoad approval: No entry in the Gilles list\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gilles Tooling","offers":[{"title":"Default Title","offer_id":53784059216138,"sku":"HG-01-KIT","price":61.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/HG-01-KIT_1_94f43659-6f8d-4410-8db8-95f140147830.png?v=1790025320"},{"product_id":"gilles-hg-01-handlebar-grips-ducati-scrambler-1100-2017-2020-hg-01-kit","title":"Gilles HG-01 Handlebar Grips Ducati SCRAMBLER 1100 (2017-2020) – HG-01-KIT","description":"\u003cp\u003eThe Scrambler 1100 has a wide, tapered handlebar and an air-cooled 1079 cc twin, a relaxed bike with a strong character. Silver aluminium grips match its retro details, and Gilles' HG-01 are milled from solid material in a slim, ergonomic shape. They are held by a clamping mechanism instead of glue.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThrottle tube with a continuous 25 to 25.7 mm diameter; clutch side 22 to 22.4 mm\u003c\/li\u003e\n\u003cli\u003eNot for inch handlebars or bikes with heated grips\u003c\/li\u003e\n\u003cli\u003eMilled from solid aluminium\u003c\/li\u003e\n\u003cli\u003eGood grip with an ergonomic, slim shape\u003c\/li\u003e\n\u003cli\u003eClamping mechanism for quick fitting\u003c\/li\u003e\n\u003cli\u003eRegistration: no Gilles entry, ask us\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eKF and KG\u003c\/h2\u003e\n\u003cp\u003eGilles lists the Scrambler 1100 from 2017 to 2020.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eGilles lists the HG-01 for the Ducati SCRAMBLER 1100 without any statement on registration. Please contact us if you need clarification for road use. Whatever the paperwork, the throttle must close by itself and the controls must remain easy to reach.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eThe HG-01 grip set: two milled aluminium grips with their clamping mechanism, silver.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eTake the old grips off, clean everything and measure the throttle tube. Mount the Gilles grips, tighten the clamps and test the throttle several times before riding. If the throttle does not snap back freely, correct the position before the first ride.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Gilles Tooling\u003c\/li\u003e\n\u003cli\u003eSeries: HG-01\u003c\/li\u003e\n\u003cli\u003ePart number: HG-01-KIT\u003c\/li\u003e\n\u003cli\u003eType: Handlebar grips, pair\u003c\/li\u003e\n\u003cli\u003eMaterial: Aluminium, milled from solid\u003c\/li\u003e\n\u003cli\u003eDimensions: Ø 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eThrottle side: Throttle tube Ø 25–25.7 mm, continuous\u003c\/li\u003e\n\u003cli\u003eClutch side: Handlebar Ø 22–22.4 mm, continuous\u003c\/li\u003e\n\u003cli\u003eFitment: Ducati SCRAMBLER 1100 (2017–2020)\u003c\/li\u003e\n\u003cli\u003eRoad approval: No entry in the Gilles list\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gilles Tooling","offers":[{"title":"Default Title","offer_id":53784059347210,"sku":"HG-01-KIT","price":61.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/HG-01-KIT_1_36879502-7caf-435b-9e48-7fef746fd321.png?v=1790025324"},{"product_id":"gilles-hg-01-handlebar-grips-ducati-scrambler-1100-special-2018-2020-hg-01-kit","title":"Gilles HG-01 Handlebar Grips Ducati SCRAMBLER 1100 SPECIAL (2018-2020) – HG-01-KIT","description":"\u003cp\u003eSpoked wheels, chromed silencers and brushed aluminium parts set the Scrambler 1100 Special apart from the other 1100s. Grips in bare metal continue that look at the handlebar. Gilles makes the HG-01 in silver only, and each grip is 118 mm long and is secured with a clamping mechanism rather than glue, which according to Gilles makes fitting quick and easy.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThrottle tube with a continuous 25 to 25.7 mm diameter; clutch side 22 to 22.4 mm\u003c\/li\u003e\n\u003cli\u003eMilled from solid aluminium\u003c\/li\u003e\n\u003cli\u003eGood grip with an ergonomic, slim shape\u003c\/li\u003e\n\u003cli\u003eClamping mechanism for quick fitting\u003c\/li\u003e\n\u003cli\u003eOuter diameter 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eRegistration: no Gilles entry, ask us\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eType KF\u003c\/h2\u003e\n\u003cp\u003eListed from 2018 without an end year.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eGilles' fitment list has no registration entry for the HG-01 grips on the Ducati SCRAMBLER 1100 SPECIAL, so we cannot quote a Gilles statement on road use here. What matters in any case: the throttle must turn freely and return to closed on its own, and the switches must stay fully usable. If you need a definite answer for your motorcycle, ask us before ordering.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eThe HG-01 grip set: two milled aluminium grips with their clamping mechanism, silver.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eRemove the original grips and clean the throttle tube and the handlebar. Check the diameters first: the throttle tube needs a continuous 25 to 25.7 mm, the clutch side 22 to 22.4 mm; plastic ribs on some throttle tubes may have to be removed, at your own discretion, according to Gilles. Fit the grips with their clamping mechanism, leave a small gap to the switch housing and check that the throttle turns freely and snaps back on its own.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Gilles Tooling\u003c\/li\u003e\n\u003cli\u003eSeries: HG-01\u003c\/li\u003e\n\u003cli\u003ePart number: HG-01-KIT\u003c\/li\u003e\n\u003cli\u003eType: Handlebar grips, pair\u003c\/li\u003e\n\u003cli\u003eMaterial: Aluminium, milled from solid\u003c\/li\u003e\n\u003cli\u003eDimensions: Ø 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eThrottle side: Throttle tube Ø 25–25.7 mm, continuous\u003c\/li\u003e\n\u003cli\u003eClutch side: Handlebar Ø 22–22.4 mm, continuous\u003c\/li\u003e\n\u003cli\u003eFitment: Ducati SCRAMBLER 1100 SPECIAL (2018–2020)\u003c\/li\u003e\n\u003cli\u003eRoad approval: No entry in the Gilles list\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gilles Tooling","offers":[{"title":"Default Title","offer_id":53784059511050,"sku":"HG-01-KIT","price":61.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/HG-01-KIT_1_07567e71-bca0-4d79-987f-e9eed9487b3b.png?v=1790025329"},{"product_id":"gilles-hg-01-handlebar-grips-ducati-scrambler-1100-sport-2019-2026-hg-01-kit","title":"Gilles HG-01 Handlebar Grips Ducati SCRAMBLER 1100 SPORT (2019-2026) – HG-01-KIT","description":"\u003cp\u003eThe Scrambler 1100 Sport, with its Öhlins suspension and black and yellow paint, is the sportiest version of the big Scrambler. Gilles' HG-01 add a technical detail to its handlebar: milled aluminium grips in silver with an ergonomic, slim profile and good grip.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThrottle tube with a continuous 25 to 25.7 mm diameter; clutch side 22 to 22.4 mm\u003c\/li\u003e\n\u003cli\u003eGood grip with an ergonomic, slim shape\u003c\/li\u003e\n\u003cli\u003eClamping mechanism for quick fitting\u003c\/li\u003e\n\u003cli\u003eOuter diameter 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eNot for inch handlebars or bikes with heated grips\u003c\/li\u003e\n\u003cli\u003eRegistration: no Gilles entry, ask us\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eK1 and K2\u003c\/h2\u003e\n\u003cp\u003eGilles lists the Scrambler 1100 Sport from 2019 without an end year.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eFor the Ducati SCRAMBLER 1100 SPORT, Gilles gives no registration information for these grips. We therefore make no claim about approval; ask us if you need one for your bike. After fitting, check that the throttle snaps back by itself at every handlebar position.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eA pair of HG-01 grips in silver, ready to fit with the integrated clamping mechanism.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eBefore fitting, make sure your bike has no heated grips and no inch handlebar; the HG-01 does not fit either. Slide the grips on, tighten the clamping mechanism evenly and check the throttle at full lock in both directions: it must return to closed by itself.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Gilles Tooling\u003c\/li\u003e\n\u003cli\u003eSeries: HG-01\u003c\/li\u003e\n\u003cli\u003ePart number: HG-01-KIT\u003c\/li\u003e\n\u003cli\u003eType: Handlebar grips, pair\u003c\/li\u003e\n\u003cli\u003eMaterial: Aluminium, milled from solid\u003c\/li\u003e\n\u003cli\u003eDimensions: Ø 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eThrottle side: Throttle tube Ø 25–25.7 mm, continuous\u003c\/li\u003e\n\u003cli\u003eClutch side: Handlebar Ø 22–22.4 mm, continuous\u003c\/li\u003e\n\u003cli\u003eFitment: Ducati SCRAMBLER 1100 SPORT (2019–2026)\u003c\/li\u003e\n\u003cli\u003eRoad approval: No entry in the Gilles list\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gilles Tooling","offers":[{"title":"Default Title","offer_id":53784059674890,"sku":"HG-01-KIT","price":61.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/HG-01-KIT_1_7a83215d-8bfe-4905-b749-6e9736397ee6.png?v=1790025335"},{"product_id":"gilles-hg-01-handlebar-grips-ducati-scrambler-800-2014-2016-hg-01-kit","title":"Gilles HG-01 Handlebar Grips Ducati SCRAMBLER 800 (2014-2016) – HG-01-KIT","description":"\u003cp\u003eDucati designed the Scrambler 800 to be customised, and grips are one of the easiest parts to change. Gilles' HG-01 are milled from solid aluminium, 32.5 mm in diameter, and fixed with a clamping mechanism. The silver finish goes well with the Scrambler's air-cooled engine and simple lines.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThrottle tube with a continuous 25 to 25.7 mm diameter; clutch side 22 to 22.4 mm\u003c\/li\u003e\n\u003cli\u003eClamping mechanism for quick fitting\u003c\/li\u003e\n\u003cli\u003eOuter diameter 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eNot for inch handlebars or bikes with heated grips\u003c\/li\u003e\n\u003cli\u003eMilled from solid aluminium\u003c\/li\u003e\n\u003cli\u003eRegistration: no Gilles entry, ask us\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eType K1\u003c\/h2\u003e\n\u003cp\u003eListed for 2015 and 2016.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eGilles lists the HG-01 for the Ducati SCRAMBLER 800 without any statement on registration. Please contact us if you need clarification for road use. Whatever the paperwork, the throttle must close by itself and the controls must remain easy to reach.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eA pair of HG-01 grips in silver, ready to fit with the integrated clamping mechanism.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eTake the old grips off, clean everything and measure the throttle tube. Mount the Gilles grips, tighten the clamps and test the throttle several times before riding. If the throttle does not snap back freely, correct the position before the first ride.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Gilles Tooling\u003c\/li\u003e\n\u003cli\u003eSeries: HG-01\u003c\/li\u003e\n\u003cli\u003ePart number: HG-01-KIT\u003c\/li\u003e\n\u003cli\u003eType: Handlebar grips, pair\u003c\/li\u003e\n\u003cli\u003eMaterial: Aluminium, milled from solid\u003c\/li\u003e\n\u003cli\u003eDimensions: Ø 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eThrottle side: Throttle tube Ø 25–25.7 mm, continuous\u003c\/li\u003e\n\u003cli\u003eClutch side: Handlebar Ø 22–22.4 mm, continuous\u003c\/li\u003e\n\u003cli\u003eFitment: Ducati SCRAMBLER 800 (2014–2016)\u003c\/li\u003e\n\u003cli\u003eRoad approval: No entry in the Gilles list\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gilles Tooling","offers":[{"title":"Default Title","offer_id":53784059805962,"sku":"HG-01-KIT","price":61.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/HG-01-KIT_1_ae04a2d7-1415-4fbd-a7e1-5b9a343c147b.png?v=1790025339"},{"product_id":"gilles-hg-01-handlebar-grips-ducati-scrambler-800-icon-dark-2014-2016-hg-01-kit","title":"Gilles HG-01 Handlebar Grips Ducati SCRAMBLER 800 ICON DARK (2014-2016) – HG-01-KIT","description":"\u003cp\u003eThe Icon Dark is the Scrambler in matt black with black engine covers, a bike without chrome or colour. On it, Gilles' silver HG-01 grips are a deliberate highlight: milled aluminium in the place the rider's hands rest. They are 118 mm long and are held by a clamping mechanism.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThrottle tube with a continuous 25 to 25.7 mm diameter; clutch side 22 to 22.4 mm\u003c\/li\u003e\n\u003cli\u003eOuter diameter 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eNot for inch handlebars or bikes with heated grips\u003c\/li\u003e\n\u003cli\u003eMilled from solid aluminium\u003c\/li\u003e\n\u003cli\u003eGood grip with an ergonomic, slim shape\u003c\/li\u003e\n\u003cli\u003eRegistration: no Gilles entry, ask us\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eType K1\u003c\/h2\u003e\n\u003cp\u003eListed for 2015 and 2016.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eGilles' fitment list has no registration entry for the HG-01 grips on the Ducati SCRAMBLER 800 ICON DARK, so we cannot quote a Gilles statement on road use here. What matters in any case: the throttle must turn freely and return to closed on its own, and the switches must stay fully usable. If you need a definite answer for your motorcycle, ask us before ordering.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eOne pair of Gilles HG-01 handlebar grips in silver, for the throttle side and the clutch side.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eRemove the original grips and clean the throttle tube and the handlebar. Check the diameters first: the throttle tube needs a continuous 25 to 25.7 mm, the clutch side 22 to 22.4 mm; plastic ribs on some throttle tubes may have to be removed, at your own discretion, according to Gilles. Fit the grips with their clamping mechanism, leave a small gap to the switch housing and check that the throttle turns freely and snaps back on its own.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Gilles Tooling\u003c\/li\u003e\n\u003cli\u003eSeries: HG-01\u003c\/li\u003e\n\u003cli\u003ePart number: HG-01-KIT\u003c\/li\u003e\n\u003cli\u003eType: Handlebar grips, pair\u003c\/li\u003e\n\u003cli\u003eMaterial: Aluminium, milled from solid\u003c\/li\u003e\n\u003cli\u003eDimensions: Ø 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eThrottle side: Throttle tube Ø 25–25.7 mm, continuous\u003c\/li\u003e\n\u003cli\u003eClutch side: Handlebar Ø 22–22.4 mm, continuous\u003c\/li\u003e\n\u003cli\u003eFitment: Ducati SCRAMBLER 800 ICON DARK (2014–2016)\u003c\/li\u003e\n\u003cli\u003eRoad approval: No entry in the Gilles list\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gilles Tooling","offers":[{"title":"Default Title","offer_id":53784059969802,"sku":"HG-01-KIT","price":61.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/HG-01-KIT_1_9989c8a1-4fa8-400a-9f81-90da0ec3281d.png?v=1790025344"},{"product_id":"gilles-hg-01-handlebar-grips-ducati-scrambler-classic-2014-2016-hg-01-kit","title":"Gilles HG-01 Handlebar Grips Ducati SCRAMBLER CLASSIC (2014-2016) – HG-01-KIT","description":"\u003cp\u003eThe Scrambler Classic has spoked wheels, a brown seat and aluminium mudguards, a deliberately old-fashioned look. Gilles' HG-01 grips suit it: plain silver aluminium, machined from solid, with a slim shape. They need a throttle tube with a continuous 25 to 25.7 mm diameter.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThrottle tube with a continuous 25 to 25.7 mm diameter; clutch side 22 to 22.4 mm\u003c\/li\u003e\n\u003cli\u003eNot for inch handlebars or bikes with heated grips\u003c\/li\u003e\n\u003cli\u003eMilled from solid aluminium\u003c\/li\u003e\n\u003cli\u003eGood grip with an ergonomic, slim shape\u003c\/li\u003e\n\u003cli\u003eClamping mechanism for quick fitting\u003c\/li\u003e\n\u003cli\u003eRegistration: no Gilles entry, ask us\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eType K1\u003c\/h2\u003e\n\u003cp\u003eGilles lists the Scrambler Classic for 2015 and 2016.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eFor the Ducati SCRAMBLER CLASSIC, Gilles gives no registration information for these grips. We therefore make no claim about approval; ask us if you need one for your bike. After fitting, check that the throttle snaps back by itself at every handlebar position.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eOne pair of Gilles HG-01 handlebar grips in silver, for the throttle side and the clutch side.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eBefore fitting, make sure your bike has no heated grips and no inch handlebar; the HG-01 does not fit either. Slide the grips on, tighten the clamping mechanism evenly and check the throttle at full lock in both directions: it must return to closed by itself.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Gilles Tooling\u003c\/li\u003e\n\u003cli\u003eSeries: HG-01\u003c\/li\u003e\n\u003cli\u003ePart number: HG-01-KIT\u003c\/li\u003e\n\u003cli\u003eType: Handlebar grips, pair\u003c\/li\u003e\n\u003cli\u003eMaterial: Aluminium, milled from solid\u003c\/li\u003e\n\u003cli\u003eDimensions: Ø 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eThrottle side: Throttle tube Ø 25–25.7 mm, continuous\u003c\/li\u003e\n\u003cli\u003eClutch side: Handlebar Ø 22–22.4 mm, continuous\u003c\/li\u003e\n\u003cli\u003eFitment: Ducati SCRAMBLER CLASSIC (2014–2016)\u003c\/li\u003e\n\u003cli\u003eRoad approval: No entry in the Gilles list\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gilles Tooling","offers":[{"title":"Default Title","offer_id":53784060035338,"sku":"HG-01-KIT","price":61.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/HG-01-KIT_1_c0339396-98d2-46d6-885a-3c4d50958071.png?v=1790025348"},{"product_id":"gilles-hg-01-handlebar-grips-ducati-scrambler-icon-2014-2016-hg-01-kit","title":"Gilles HG-01 Handlebar Grips Ducati SCRAMBLER ICON (2014-2016) – HG-01-KIT","description":"\u003cp\u003eThe Scrambler Icon is the entry to the Scrambler family, often in its yellow paint. Replacing the rubber grips with Gilles' HG-01 is an affordable upgrade that is felt on every ride: solid aluminium, silver, 32.5 mm in diameter, with a clamping mechanism for quick fitting.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThrottle tube with a continuous 25 to 25.7 mm diameter; clutch side 22 to 22.4 mm\u003c\/li\u003e\n\u003cli\u003eMilled from solid aluminium\u003c\/li\u003e\n\u003cli\u003eGood grip with an ergonomic, slim shape\u003c\/li\u003e\n\u003cli\u003eClamping mechanism for quick fitting\u003c\/li\u003e\n\u003cli\u003eOuter diameter 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eRegistration: no Gilles entry, ask us\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eType K1\u003c\/h2\u003e\n\u003cp\u003eListed for 2015 and 2016.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eGilles lists the HG-01 for the Ducati SCRAMBLER ICON without any statement on registration. Please contact us if you need clarification for road use. Whatever the paperwork, the throttle must close by itself and the controls must remain easy to reach.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eThe HG-01 grip set: two milled aluminium grips with their clamping mechanism, silver.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eTake the old grips off, clean everything and measure the throttle tube. Mount the Gilles grips, tighten the clamps and test the throttle several times before riding. If the throttle does not snap back freely, correct the position before the first ride.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Gilles Tooling\u003c\/li\u003e\n\u003cli\u003eSeries: HG-01\u003c\/li\u003e\n\u003cli\u003ePart number: HG-01-KIT\u003c\/li\u003e\n\u003cli\u003eType: Handlebar grips, pair\u003c\/li\u003e\n\u003cli\u003eMaterial: Aluminium, milled from solid\u003c\/li\u003e\n\u003cli\u003eDimensions: Ø 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eThrottle side: Throttle tube Ø 25–25.7 mm, continuous\u003c\/li\u003e\n\u003cli\u003eClutch side: Handlebar Ø 22–22.4 mm, continuous\u003c\/li\u003e\n\u003cli\u003eFitment: Ducati SCRAMBLER ICON (2014–2016)\u003c\/li\u003e\n\u003cli\u003eRoad approval: No entry in the Gilles list\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gilles Tooling","offers":[{"title":"Default Title","offer_id":53784060199178,"sku":"HG-01-KIT","price":61.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/HG-01-KIT_1_279e0a8b-11ff-4fbe-90df-0b9ab458608c.png?v=1790025353"},{"product_id":"gilles-hg-01-handlebar-grips-ducati-streetfighter-848-2012-2015-hg-01-kit","title":"Gilles HG-01 Handlebar Grips Ducati STREETFIGHTER 848 (2012-2015) – HG-01-KIT","description":"\u003cp\u003eThe Streetfighter 848 is a superbike without fairing, with a wide handlebar and an aggressive riding position. Gilles' HG-01 grips give that handlebar a finished look: milled aluminium, silver, in a slim, ergonomic shape. The clamping mechanism makes fitting quick.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThrottle tube with a continuous 25 to 25.7 mm diameter; clutch side 22 to 22.4 mm\u003c\/li\u003e\n\u003cli\u003eGood grip with an ergonomic, slim shape\u003c\/li\u003e\n\u003cli\u003eClamping mechanism for quick fitting\u003c\/li\u003e\n\u003cli\u003eOuter diameter 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eNot for inch handlebars or bikes with heated grips\u003c\/li\u003e\n\u003cli\u003eRegistration: no Gilles entry, ask us\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eF1 \/ 00\u003c\/h2\u003e\n\u003cp\u003eListed for 2012 to 2015.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eGilles' fitment list has no registration entry for the HG-01 grips on the Ducati STREETFIGHTER 848, so we cannot quote a Gilles statement on road use here. What matters in any case: the throttle must turn freely and return to closed on its own, and the switches must stay fully usable. If you need a definite answer for your motorcycle, ask us before ordering.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eThe HG-01 grip set: two milled aluminium grips with their clamping mechanism, silver.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eRemove the original grips and clean the throttle tube and the handlebar. Check the diameters first: the throttle tube needs a continuous 25 to 25.7 mm, the clutch side 22 to 22.4 mm; plastic ribs on some throttle tubes may have to be removed, at your own discretion, according to Gilles. Fit the grips with their clamping mechanism, leave a small gap to the switch housing and check that the throttle turns freely and snaps back on its own.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Gilles Tooling\u003c\/li\u003e\n\u003cli\u003eSeries: HG-01\u003c\/li\u003e\n\u003cli\u003ePart number: HG-01-KIT\u003c\/li\u003e\n\u003cli\u003eType: Handlebar grips, pair\u003c\/li\u003e\n\u003cli\u003eMaterial: Aluminium, milled from solid\u003c\/li\u003e\n\u003cli\u003eDimensions: Ø 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eThrottle side: Throttle tube Ø 25–25.7 mm, continuous\u003c\/li\u003e\n\u003cli\u003eClutch side: Handlebar Ø 22–22.4 mm, continuous\u003c\/li\u003e\n\u003cli\u003eFitment: Ducati STREETFIGHTER 848 (2012–2015)\u003c\/li\u003e\n\u003cli\u003eRoad approval: No entry in the Gilles list\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gilles Tooling","offers":[{"title":"Default Title","offer_id":53784060297482,"sku":"HG-01-KIT","price":61.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/HG-01-KIT_1_fe9d1270-83e6-4f0c-82c7-cc7d1fa1752c.png?v=1790025358"},{"product_id":"gilles-hg-01-handlebar-grips-honda-cb-1000-r-ra-2008-2017-hg-01-kit","title":"Gilles HG-01 Handlebar Grips Honda CB 1000 R RA (2008-2017) – HG-01-KIT","description":"\u003cp\u003eThe first CB1000R, with its single-sided swingarm and Fireblade-derived four, is a naked bike for riders who like modern design. Gilles' HG-01 grips add machined aluminium to its cockpit: 118 mm long, 32.5 mm in diameter, silver, with a clamping mechanism.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThrottle tube with a continuous 25 to 25.7 mm diameter; clutch side 22 to 22.4 mm\u003c\/li\u003e\n\u003cli\u003eClamping mechanism for quick fitting\u003c\/li\u003e\n\u003cli\u003eOuter diameter 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eNot for inch handlebars or bikes with heated grips\u003c\/li\u003e\n\u003cli\u003eMilled from solid aluminium\u003c\/li\u003e\n\u003cli\u003eRegistration: no Gilles entry, ask us\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eType SC60\u003c\/h2\u003e\n\u003cp\u003eGilles lists the CB1000R of 2008 to 2017. The newer SC80 has its own page.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eFor the Honda CB 1000 R RA, Gilles gives no registration information for these grips. We therefore make no claim about approval; ask us if you need one for your bike. After fitting, check that the throttle snaps back by itself at every handlebar position.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eA pair of HG-01 grips in silver, ready to fit with the integrated clamping mechanism.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eBefore fitting, make sure your bike has no heated grips and no inch handlebar; the HG-01 does not fit either. Slide the grips on, tighten the clamping mechanism evenly and check the throttle at full lock in both directions: it must return to closed by itself.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Gilles Tooling\u003c\/li\u003e\n\u003cli\u003eSeries: HG-01\u003c\/li\u003e\n\u003cli\u003ePart number: HG-01-KIT\u003c\/li\u003e\n\u003cli\u003eType: Handlebar grips, pair\u003c\/li\u003e\n\u003cli\u003eMaterial: Aluminium, milled from solid\u003c\/li\u003e\n\u003cli\u003eDimensions: Ø 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eThrottle side: Throttle tube Ø 25–25.7 mm, continuous\u003c\/li\u003e\n\u003cli\u003eClutch side: Handlebar Ø 22–22.4 mm, continuous\u003c\/li\u003e\n\u003cli\u003eFitment: Honda CB 1000 R RA (2008–2017)\u003c\/li\u003e\n\u003cli\u003eRoad approval: No entry in the Gilles list\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gilles Tooling","offers":[{"title":"Default Title","offer_id":53784060428554,"sku":"HG-01-KIT","price":61.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/HG-01-KIT_1_dd8f6b10-e796-4f08-b7f2-2998fe895d29.png?v=1790025363"},{"product_id":"gilles-hg-01-handlebar-grips-honda-cb-1300-s-2003-2017-hg-01-kit","title":"Gilles HG-01 Handlebar Grips Honda CB 1300 S (2003-2017) – HG-01-KIT","description":"\u003cp\u003eThe CB1300 S is a big, relaxed four with a half fairing, and it is often ridden two-up and on long trips. Heated grips were a popular option, and Gilles does not recommend the HG-01 on bikes that have them. On a CB1300 S without, the aluminium grips replace the rubber ones with a slim, firm profile.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThrottle tube with a continuous 25 to 25.7 mm diameter; clutch side 22 to 22.4 mm\u003c\/li\u003e\n\u003cli\u003eOuter diameter 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eNot for inch handlebars or bikes with heated grips\u003c\/li\u003e\n\u003cli\u003eMilled from solid aluminium\u003c\/li\u003e\n\u003cli\u003eGood grip with an ergonomic, slim shape\u003c\/li\u003e\n\u003cli\u003eRegistration: no Gilles entry, ask us\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eType SC54\u003c\/h2\u003e\n\u003cp\u003eListed for 2003 to 2017.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eGilles lists the HG-01 for the Honda CB 1300 S without any statement on registration. Please contact us if you need clarification for road use. Whatever the paperwork, the throttle must close by itself and the controls must remain easy to reach.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eA pair of HG-01 grips in silver, ready to fit with the integrated clamping mechanism.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eTake the old grips off, clean everything and measure the throttle tube. Mount the Gilles grips, tighten the clamps and test the throttle several times before riding. If the throttle does not snap back freely, correct the position before the first ride.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Gilles Tooling\u003c\/li\u003e\n\u003cli\u003eSeries: HG-01\u003c\/li\u003e\n\u003cli\u003ePart number: HG-01-KIT\u003c\/li\u003e\n\u003cli\u003eType: Handlebar grips, pair\u003c\/li\u003e\n\u003cli\u003eMaterial: Aluminium, milled from solid\u003c\/li\u003e\n\u003cli\u003eDimensions: Ø 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eThrottle side: Throttle tube Ø 25–25.7 mm, continuous\u003c\/li\u003e\n\u003cli\u003eClutch side: Handlebar Ø 22–22.4 mm, continuous\u003c\/li\u003e\n\u003cli\u003eFitment: Honda CB 1300 S (2003–2017)\u003c\/li\u003e\n\u003cli\u003eRoad approval: No entry in the Gilles list\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gilles Tooling","offers":[{"title":"Default Title","offer_id":53784060625162,"sku":"HG-01-KIT","price":61.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/HG-01-KIT_1_47b2dbbc-4251-41ec-b437-38172628b5fc.png?v=1790025368"},{"product_id":"gilles-hg-01-handlebar-grips-honda-cb1000r-2018-2026-hg-01-kit","title":"Gilles HG-01 Handlebar Grips Honda CB1000R (2018-2026) – HG-01-KIT","description":"\u003cp\u003eThe CB1000R of 2018 onwards is the Neo Sports Café, full of brushed aluminium and bare metal surfaces. Gilles' HG-01 grips fit that concept closely: silver aluminium, milled from solid, in the place where the rider's hands rest. They are held by a clamping mechanism.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThrottle tube with a continuous 25 to 25.7 mm diameter; clutch side 22 to 22.4 mm\u003c\/li\u003e\n\u003cli\u003eNot for inch handlebars or bikes with heated grips\u003c\/li\u003e\n\u003cli\u003eMilled from solid aluminium\u003c\/li\u003e\n\u003cli\u003eGood grip with an ergonomic, slim shape\u003c\/li\u003e\n\u003cli\u003eClamping mechanism for quick fitting\u003c\/li\u003e\n\u003cli\u003eRegistration: no Gilles entry, ask us\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eType SC80\u003c\/h2\u003e\n\u003cp\u003eGilles lists the CB1000R from 2018 without an end year.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eGilles' fitment list has no registration entry for the HG-01 grips on the Honda CB1000R, so we cannot quote a Gilles statement on road use here. What matters in any case: the throttle must turn freely and return to closed on its own, and the switches must stay fully usable. If you need a definite answer for your motorcycle, ask us before ordering.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eOne pair of Gilles HG-01 handlebar grips in silver, for the throttle side and the clutch side.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eRemove the original grips and clean the throttle tube and the handlebar. Check the diameters first: the throttle tube needs a continuous 25 to 25.7 mm, the clutch side 22 to 22.4 mm; plastic ribs on some throttle tubes may have to be removed, at your own discretion, according to Gilles. Fit the grips with their clamping mechanism, leave a small gap to the switch housing and check that the throttle turns freely and snaps back on its own.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Gilles Tooling\u003c\/li\u003e\n\u003cli\u003eSeries: HG-01\u003c\/li\u003e\n\u003cli\u003ePart number: HG-01-KIT\u003c\/li\u003e\n\u003cli\u003eType: Handlebar grips, pair\u003c\/li\u003e\n\u003cli\u003eMaterial: Aluminium, milled from solid\u003c\/li\u003e\n\u003cli\u003eDimensions: Ø 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eThrottle side: Throttle tube Ø 25–25.7 mm, continuous\u003c\/li\u003e\n\u003cli\u003eClutch side: Handlebar Ø 22–22.4 mm, continuous\u003c\/li\u003e\n\u003cli\u003eFitment: Honda CB1000R (2018–2026)\u003c\/li\u003e\n\u003cli\u003eRoad approval: No entry in the Gilles list\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gilles Tooling","offers":[{"title":"Default Title","offer_id":53784060821770,"sku":"HG-01-KIT","price":61.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/HG-01-KIT_1_76cf34bd-10c6-4afa-af30-3b2350e1706e.png?v=1790025373"},{"product_id":"gilles-hg-01-handlebar-grips-honda-cb1100-2013-2016-hg-01-kit","title":"Gilles HG-01 Handlebar Grips Honda CB1100 (2013-2016) – HG-01-KIT","description":"\u003cp\u003eAir-cooled fins, round clocks and twin shocks: the CB1100 is Honda's homage to the big fours of the 1970s. Metal grips were not part of the original, but they fit the theme of honest materials. Gilles' HG-01 grips are silver aluminium, slim and firm, and they can be mounted without glue thanks to their clamping mechanism. Before ordering, measure the throttle tube; Gilles specifies a continuous diameter.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThrottle tube with a continuous 25 to 25.7 mm diameter; clutch side 22 to 22.4 mm\u003c\/li\u003e\n\u003cli\u003eMilled from solid aluminium\u003c\/li\u003e\n\u003cli\u003eGood grip with an ergonomic, slim shape\u003c\/li\u003e\n\u003cli\u003eClamping mechanism for quick fitting\u003c\/li\u003e\n\u003cli\u003eOuter diameter 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eRegistration: no Gilles entry, ask us\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eType SC65\u003c\/h2\u003e\n\u003cp\u003eListed for 2013 to 2016.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eFor the Honda CB1100, Gilles gives no registration information for these grips. We therefore make no claim about approval; ask us if you need one for your bike. After fitting, check that the throttle snaps back by itself at every handlebar position.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eOne pair of Gilles HG-01 handlebar grips in silver, for the throttle side and the clutch side.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eBefore fitting, make sure your bike has no heated grips and no inch handlebar; the HG-01 does not fit either. Slide the grips on, tighten the clamping mechanism evenly and check the throttle at full lock in both directions: it must return to closed by itself.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Gilles Tooling\u003c\/li\u003e\n\u003cli\u003eSeries: HG-01\u003c\/li\u003e\n\u003cli\u003ePart number: HG-01-KIT\u003c\/li\u003e\n\u003cli\u003eType: Handlebar grips, pair\u003c\/li\u003e\n\u003cli\u003eMaterial: Aluminium, milled from solid\u003c\/li\u003e\n\u003cli\u003eDimensions: Ø 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eThrottle side: Throttle tube Ø 25–25.7 mm, continuous\u003c\/li\u003e\n\u003cli\u003eClutch side: Handlebar Ø 22–22.4 mm, continuous\u003c\/li\u003e\n\u003cli\u003eFitment: Honda CB1100 (2013–2016)\u003c\/li\u003e\n\u003cli\u003eRoad approval: No entry in the Gilles list\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gilles Tooling","offers":[{"title":"Default Title","offer_id":53784060985610,"sku":"HG-01-KIT","price":61.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/HG-01-KIT_1_0b2eaa33-9b36-4a0f-9686-96c2717eee59.png?v=1790025378"},{"product_id":"gilles-hg-01-handlebar-grips-honda-cb500f-2013-2015-hg-01-kit","title":"Gilles HG-01 Handlebar Grips Honda CB500F (2013-2015) – HG-01-KIT","description":"\u003cp\u003eThe CB500F is often a commuter, ridden every day in all weather, so the grips are the part the rider touches most often. Gilles' HG-01 replace them with aluminium: slim, with good grip, 32.5 mm in diameter. In winter, metal grips feel cold, so gloves are recommended.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThrottle tube with a continuous 25 to 25.7 mm diameter; clutch side 22 to 22.4 mm\u003c\/li\u003e\n\u003cli\u003eGood grip with an ergonomic, slim shape\u003c\/li\u003e\n\u003cli\u003eClamping mechanism for quick fitting\u003c\/li\u003e\n\u003cli\u003eOuter diameter 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eNot for inch handlebars or bikes with heated grips\u003c\/li\u003e\n\u003cli\u003eRegistration: no Gilles entry, ask us\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eType PC44\u003c\/h2\u003e\n\u003cp\u003eListed for 2013 to 2015.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eGilles lists the HG-01 for the Honda CB500F without any statement on registration. Please contact us if you need clarification for road use. Whatever the paperwork, the throttle must close by itself and the controls must remain easy to reach.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eThe HG-01 grip set: two milled aluminium grips with their clamping mechanism, silver.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eTake the old grips off, clean everything and measure the throttle tube. Mount the Gilles grips, tighten the clamps and test the throttle several times before riding. If the throttle does not snap back freely, correct the position before the first ride.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Gilles Tooling\u003c\/li\u003e\n\u003cli\u003eSeries: HG-01\u003c\/li\u003e\n\u003cli\u003ePart number: HG-01-KIT\u003c\/li\u003e\n\u003cli\u003eType: Handlebar grips, pair\u003c\/li\u003e\n\u003cli\u003eMaterial: Aluminium, milled from solid\u003c\/li\u003e\n\u003cli\u003eDimensions: Ø 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eThrottle side: Throttle tube Ø 25–25.7 mm, continuous\u003c\/li\u003e\n\u003cli\u003eClutch side: Handlebar Ø 22–22.4 mm, continuous\u003c\/li\u003e\n\u003cli\u003eFitment: Honda CB500F (2013–2015)\u003c\/li\u003e\n\u003cli\u003eRoad approval: No entry in the Gilles list\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gilles Tooling","offers":[{"title":"Default Title","offer_id":53784061116682,"sku":"HG-01-KIT","price":61.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/HG-01-KIT_1_6e761c97-79fc-4a3f-98fa-92f6235947cd.png?v=1790025383"},{"product_id":"gilles-hg-01-handlebar-grips-honda-cb500x-2013-2015-hg-01-kit","title":"Gilles HG-01 Handlebar Grips Honda CB500X (2013-2015) – HG-01-KIT","description":"\u003cp\u003eThe CB500X is a light adventure-style bike for long trips on a budget. Gilles' HG-01 grips give its handlebar a more exclusive feel: milled aluminium, silver, held by a clamping mechanism. Check first that the bike has no heated grips, which some owners retrofit for touring.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThrottle tube with a continuous 25 to 25.7 mm diameter; clutch side 22 to 22.4 mm\u003c\/li\u003e\n\u003cli\u003eClamping mechanism for quick fitting\u003c\/li\u003e\n\u003cli\u003eOuter diameter 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eNot for inch handlebars or bikes with heated grips\u003c\/li\u003e\n\u003cli\u003eMilled from solid aluminium\u003c\/li\u003e\n\u003cli\u003eRegistration: no Gilles entry, ask us\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eType PC44\u003c\/h2\u003e\n\u003cp\u003eGilles lists the CB500X of 2013 to 2015.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eGilles' fitment list has no registration entry for the HG-01 grips on the Honda CB500X, so we cannot quote a Gilles statement on road use here. What matters in any case: the throttle must turn freely and return to closed on its own, and the switches must stay fully usable. If you need a definite answer for your motorcycle, ask us before ordering.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eThe HG-01 grip set: two milled aluminium grips with their clamping mechanism, silver.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eRemove the original grips and clean the throttle tube and the handlebar. Check the diameters first: the throttle tube needs a continuous 25 to 25.7 mm, the clutch side 22 to 22.4 mm; plastic ribs on some throttle tubes may have to be removed, at your own discretion, according to Gilles. Fit the grips with their clamping mechanism, leave a small gap to the switch housing and check that the throttle turns freely and snaps back on its own.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Gilles Tooling\u003c\/li\u003e\n\u003cli\u003eSeries: HG-01\u003c\/li\u003e\n\u003cli\u003ePart number: HG-01-KIT\u003c\/li\u003e\n\u003cli\u003eType: Handlebar grips, pair\u003c\/li\u003e\n\u003cli\u003eMaterial: Aluminium, milled from solid\u003c\/li\u003e\n\u003cli\u003eDimensions: Ø 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eThrottle side: Throttle tube Ø 25–25.7 mm, continuous\u003c\/li\u003e\n\u003cli\u003eClutch side: Handlebar Ø 22–22.4 mm, continuous\u003c\/li\u003e\n\u003cli\u003eFitment: Honda CB500X (2013–2015)\u003c\/li\u003e\n\u003cli\u003eRoad approval: No entry in the Gilles list\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gilles Tooling","offers":[{"title":"Default Title","offer_id":53784061280522,"sku":"HG-01-KIT","price":61.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/HG-01-KIT_1_298f5630-31ad-4e9d-a3ae-0ab1c86f9d14.png?v=1790025388"},{"product_id":"gilles-hg-01-handlebar-grips-honda-cb650f-2014-2015-hg-01-kit","title":"Gilles HG-01 Handlebar Grips Honda CB650F (2014-2015) – HG-01-KIT","description":"\u003cp\u003eThe CB650F's four-cylinder revs smoothly, and its naked handlebar is in full view. Gilles' HG-01 grips turn that handlebar into a detail: silver aluminium, machined from solid, with an ergonomic profile of 32.5 mm and a length of 118 mm.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThrottle tube with a continuous 25 to 25.7 mm diameter; clutch side 22 to 22.4 mm\u003c\/li\u003e\n\u003cli\u003eOuter diameter 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eNot for inch handlebars or bikes with heated grips\u003c\/li\u003e\n\u003cli\u003eMilled from solid aluminium\u003c\/li\u003e\n\u003cli\u003eGood grip with an ergonomic, slim shape\u003c\/li\u003e\n\u003cli\u003eRegistration: no Gilles entry, ask us\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eType RC75\u003c\/h2\u003e\n\u003cp\u003eListed for 2014 and 2015.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eFor the Honda CB650F, Gilles gives no registration information for these grips. We therefore make no claim about approval; ask us if you need one for your bike. After fitting, check that the throttle snaps back by itself at every handlebar position.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eA pair of HG-01 grips in silver, ready to fit with the integrated clamping mechanism.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eBefore fitting, make sure your bike has no heated grips and no inch handlebar; the HG-01 does not fit either. Slide the grips on, tighten the clamping mechanism evenly and check the throttle at full lock in both directions: it must return to closed by itself.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Gilles Tooling\u003c\/li\u003e\n\u003cli\u003eSeries: HG-01\u003c\/li\u003e\n\u003cli\u003ePart number: HG-01-KIT\u003c\/li\u003e\n\u003cli\u003eType: Handlebar grips, pair\u003c\/li\u003e\n\u003cli\u003eMaterial: Aluminium, milled from solid\u003c\/li\u003e\n\u003cli\u003eDimensions: Ø 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eThrottle side: Throttle tube Ø 25–25.7 mm, continuous\u003c\/li\u003e\n\u003cli\u003eClutch side: Handlebar Ø 22–22.4 mm, continuous\u003c\/li\u003e\n\u003cli\u003eFitment: Honda CB650F (2014–2015)\u003c\/li\u003e\n\u003cli\u003eRoad approval: No entry in the Gilles list\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gilles Tooling","offers":[{"title":"Default Title","offer_id":53784061411594,"sku":"HG-01-KIT","price":61.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/HG-01-KIT_1_f646bdff-7f1b-420c-b6f6-5b9745911139.png?v=1790025392"},{"product_id":"gilles-hg-01-handlebar-grips-honda-cbf-1000-2006-2018-hg-01-kit","title":"Gilles HG-01 Handlebar Grips Honda CBF 1000 (2006-2018) – HG-01-KIT","description":"\u003cp\u003eThe CBF 1000 is a practical tourer, and many owners have added heated grips over the years. If yours has them, the HG-01 is not the right part, according to Gilles. On a CBF without heated grips, the milled aluminium grips replace the rubber ones and give the handlebar a more technical look.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThrottle tube with a continuous 25 to 25.7 mm diameter; clutch side 22 to 22.4 mm\u003c\/li\u003e\n\u003cli\u003eNot for inch handlebars or bikes with heated grips\u003c\/li\u003e\n\u003cli\u003eMilled from solid aluminium\u003c\/li\u003e\n\u003cli\u003eGood grip with an ergonomic, slim shape\u003c\/li\u003e\n\u003cli\u003eClamping mechanism for quick fitting\u003c\/li\u003e\n\u003cli\u003eRegistration: no Gilles entry, ask us\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eType SC58\u003c\/h2\u003e\n\u003cp\u003eListed for 2006 to 2018.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eGilles lists the HG-01 for the Honda CBF 1000 without any statement on registration. Please contact us if you need clarification for road use. Whatever the paperwork, the throttle must close by itself and the controls must remain easy to reach.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eA pair of HG-01 grips in silver, ready to fit with the integrated clamping mechanism.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eTake the old grips off, clean everything and measure the throttle tube. Mount the Gilles grips, tighten the clamps and test the throttle several times before riding. If the throttle does not snap back freely, correct the position before the first ride.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Gilles Tooling\u003c\/li\u003e\n\u003cli\u003eSeries: HG-01\u003c\/li\u003e\n\u003cli\u003ePart number: HG-01-KIT\u003c\/li\u003e\n\u003cli\u003eType: Handlebar grips, pair\u003c\/li\u003e\n\u003cli\u003eMaterial: Aluminium, milled from solid\u003c\/li\u003e\n\u003cli\u003eDimensions: Ø 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eThrottle side: Throttle tube Ø 25–25.7 mm, continuous\u003c\/li\u003e\n\u003cli\u003eClutch side: Handlebar Ø 22–22.4 mm, continuous\u003c\/li\u003e\n\u003cli\u003eFitment: Honda CBF 1000 (2006–2018)\u003c\/li\u003e\n\u003cli\u003eRoad approval: No entry in the Gilles list\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gilles Tooling","offers":[{"title":"Default Title","offer_id":53784061673738,"sku":"HG-01-KIT","price":61.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/HG-01-KIT_1_ecbd9847-2377-491a-9f11-f4bbc8b0880f.png?v=1790025397"},{"product_id":"gilles-hg-01-handlebar-grips-honda-cbr-1000-rr-2012-2023-hg-01-kit","title":"Gilles HG-01 Handlebar Grips Honda CBR 1000 RR (2012-2023) – HG-01-KIT","description":"\u003cp\u003eGilles lists the HG-01 for a long run of Fireblades: the SC59 facelift from 2012, the SC77 of 2017 and the SC82 from 2020. On the clip-ons, the aluminium grips replace the rubber originals with a slim, firm profile; they are silver, 118 mm long and held by a clamping mechanism.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThrottle tube with a continuous 25 to 25.7 mm diameter; clutch side 22 to 22.4 mm\u003c\/li\u003e\n\u003cli\u003eMilled from solid aluminium\u003c\/li\u003e\n\u003cli\u003eGood grip with an ergonomic, slim shape\u003c\/li\u003e\n\u003cli\u003eClamping mechanism for quick fitting\u003c\/li\u003e\n\u003cli\u003eOuter diameter 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eRegistration: no Gilles entry, ask us\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSC59, SC77 and SC82\u003c\/h2\u003e\n\u003cp\u003eGilles names the SC59\/SC591 with and without ABS, the SC77 of 2017 to 2019 and the SC82 of 2020 to 2023.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eGilles' fitment list has no registration entry for the HG-01 grips on the Honda CBR 1000 RR, so we cannot quote a Gilles statement on road use here. What matters in any case: the throttle must turn freely and return to closed on its own, and the switches must stay fully usable. If you need a definite answer for your motorcycle, ask us before ordering.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eOne pair of Gilles HG-01 handlebar grips in silver, for the throttle side and the clutch side.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eRemove the original grips and clean the throttle tube and the handlebar. Check the diameters first: the throttle tube needs a continuous 25 to 25.7 mm, the clutch side 22 to 22.4 mm; plastic ribs on some throttle tubes may have to be removed, at your own discretion, according to Gilles. Fit the grips with their clamping mechanism, leave a small gap to the switch housing and check that the throttle turns freely and snaps back on its own.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Gilles Tooling\u003c\/li\u003e\n\u003cli\u003eSeries: HG-01\u003c\/li\u003e\n\u003cli\u003ePart number: HG-01-KIT\u003c\/li\u003e\n\u003cli\u003eType: Handlebar grips, pair\u003c\/li\u003e\n\u003cli\u003eMaterial: Aluminium, milled from solid\u003c\/li\u003e\n\u003cli\u003eDimensions: Ø 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eThrottle side: Throttle tube Ø 25–25.7 mm, continuous\u003c\/li\u003e\n\u003cli\u003eClutch side: Handlebar Ø 22–22.4 mm, continuous\u003c\/li\u003e\n\u003cli\u003eFitment: Honda CBR 1000 RR (2012–2023)\u003c\/li\u003e\n\u003cli\u003eRoad approval: No entry in the Gilles list\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gilles Tooling","offers":[{"title":"Default Title","offer_id":53784061903114,"sku":"HG-01-KIT","price":61.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/HG-01-KIT_1_fd40d582-d4fc-4625-83f3-31b02a9b52bd.png?v=1790025402"},{"product_id":"gilles-hg-01-handlebar-grips-honda-cbr-600-rr-2009-2026-hg-01-kit","title":"Gilles HG-01 Handlebar Grips Honda CBR 600 RR (2009-2016, 2023-2026) – HG-01-KIT","description":"\u003cp\u003eThe CBR600RR was built as the PC40 until 2016 and returned as the PC69 in 2023, and Gilles lists the HG-01 grips for both. The aluminium grips suit a supersport: slim, with good grip for precise throttle control, 32.5 mm in diameter, silver.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThrottle tube with a continuous 25 to 25.7 mm diameter; clutch side 22 to 22.4 mm\u003c\/li\u003e\n\u003cli\u003eGood grip with an ergonomic, slim shape\u003c\/li\u003e\n\u003cli\u003eClamping mechanism for quick fitting\u003c\/li\u003e\n\u003cli\u003eOuter diameter 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eNot for inch handlebars or bikes with heated grips\u003c\/li\u003e\n\u003cli\u003eRegistration: no Gilles entry, ask us\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePC40 and PC69\u003c\/h2\u003e\n\u003cp\u003eListed for 2009 to 2016 and from 2023.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eFor the Honda CBR 600 RR, Gilles gives no registration information for these grips. We therefore make no claim about approval; ask us if you need one for your bike. After fitting, check that the throttle snaps back by itself at every handlebar position.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eOne pair of Gilles HG-01 handlebar grips in silver, for the throttle side and the clutch side.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eBefore fitting, make sure your bike has no heated grips and no inch handlebar; the HG-01 does not fit either. Slide the grips on, tighten the clamping mechanism evenly and check the throttle at full lock in both directions: it must return to closed by itself.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Gilles Tooling\u003c\/li\u003e\n\u003cli\u003eSeries: HG-01\u003c\/li\u003e\n\u003cli\u003ePart number: HG-01-KIT\u003c\/li\u003e\n\u003cli\u003eType: Handlebar grips, pair\u003c\/li\u003e\n\u003cli\u003eMaterial: Aluminium, milled from solid\u003c\/li\u003e\n\u003cli\u003eDimensions: Ø 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eThrottle side: Throttle tube Ø 25–25.7 mm, continuous\u003c\/li\u003e\n\u003cli\u003eClutch side: Handlebar Ø 22–22.4 mm, continuous\u003c\/li\u003e\n\u003cli\u003eFitment: Honda CBR 600 RR (2009–2016, 2023–2026)\u003c\/li\u003e\n\u003cli\u003eRoad approval: No entry in the Gilles list\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gilles Tooling","offers":[{"title":"Default Title","offer_id":53784062132490,"sku":"HG-01-KIT","price":61.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/HG-01-KIT_1_499117c4-c774-4df1-b7fa-03c3561bb7df.png?v=1790025406"},{"product_id":"gilles-hg-01-handlebar-grips-honda-cbr250r-2011-2015-hg-01-kit","title":"Gilles HG-01 Handlebar Grips Honda CBR250R (2011-2015) – HG-01-KIT","description":"\u003cp\u003eHonda's CBR250R is a single-cylinder sports bike that many riders buy as their first motorcycle and keep longer than planned. If you want to give it a part that feels like it belongs on a bigger machine, start where your hands rest. The HG-01 from Gilles is turned into a grip from a solid aluminium bar, and its outer diameter of 32.5 mm is slimmer than many rubber grips, which suits smaller hands.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThrottle tube with a continuous 25 to 25.7 mm diameter; clutch side 22 to 22.4 mm\u003c\/li\u003e\n\u003cli\u003eClamping mechanism for quick fitting\u003c\/li\u003e\n\u003cli\u003eOuter diameter 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eNot for inch handlebars or bikes with heated grips\u003c\/li\u003e\n\u003cli\u003eMilled from solid aluminium\u003c\/li\u003e\n\u003cli\u003eRegistration: no Gilles entry, ask us\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eType MC41\u003c\/h2\u003e\n\u003cp\u003eListed for 2011 to 2015.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eGilles lists the HG-01 for the Honda CBR250R without any statement on registration. Please contact us if you need clarification for road use. Whatever the paperwork, the throttle must close by itself and the controls must remain easy to reach.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eThe HG-01 grip set: two milled aluminium grips with their clamping mechanism, silver.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eTake the old grips off, clean everything and measure the throttle tube. Mount the Gilles grips, tighten the clamps and test the throttle several times before riding. If the throttle does not snap back freely, correct the position before the first ride.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Gilles Tooling\u003c\/li\u003e\n\u003cli\u003eSeries: HG-01\u003c\/li\u003e\n\u003cli\u003ePart number: HG-01-KIT\u003c\/li\u003e\n\u003cli\u003eType: Handlebar grips, pair\u003c\/li\u003e\n\u003cli\u003eMaterial: Aluminium, milled from solid\u003c\/li\u003e\n\u003cli\u003eDimensions: Ø 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eThrottle side: Throttle tube Ø 25–25.7 mm, continuous\u003c\/li\u003e\n\u003cli\u003eClutch side: Handlebar Ø 22–22.4 mm, continuous\u003c\/li\u003e\n\u003cli\u003eFitment: Honda CBR250R (2011–2015)\u003c\/li\u003e\n\u003cli\u003eRoad approval: No entry in the Gilles list\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gilles Tooling","offers":[{"title":"Default Title","offer_id":53784062263562,"sku":"HG-01-KIT","price":61.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/HG-01-KIT_1_ede85058-fb6e-462b-a9e7-85e5124b00f4.png?v=1790025413"},{"product_id":"gilles-hg-01-handlebar-grips-honda-cbr300r-2015-2020-hg-01-kit","title":"Gilles HG-01 Handlebar Grips Honda CBR300R (2015-2020) – HG-01-KIT","description":"\u003cp\u003eOn the CBR300R, a learner's sports bike, Gilles' HG-01 grips are an upgrade that the rider feels on every trip. The aluminium grips are slim and firm, with a 32.5 mm outer diameter; on the throttle side, they need a continuous tube of 25 to 25.7 mm.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThrottle tube with a continuous 25 to 25.7 mm diameter; clutch side 22 to 22.4 mm\u003c\/li\u003e\n\u003cli\u003eOuter diameter 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eNot for inch handlebars or bikes with heated grips\u003c\/li\u003e\n\u003cli\u003eMilled from solid aluminium\u003c\/li\u003e\n\u003cli\u003eGood grip with an ergonomic, slim shape\u003c\/li\u003e\n\u003cli\u003eRegistration: no Gilles entry, ask us\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eType NC51\u003c\/h2\u003e\n\u003cp\u003eListed for 2015 to 2020.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eGilles' fitment list has no registration entry for the HG-01 grips on the Honda CBR300R, so we cannot quote a Gilles statement on road use here. What matters in any case: the throttle must turn freely and return to closed on its own, and the switches must stay fully usable. If you need a definite answer for your motorcycle, ask us before ordering.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eThe HG-01 grip set: two milled aluminium grips with their clamping mechanism, silver.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eRemove the original grips and clean the throttle tube and the handlebar. Check the diameters first: the throttle tube needs a continuous 25 to 25.7 mm, the clutch side 22 to 22.4 mm; plastic ribs on some throttle tubes may have to be removed, at your own discretion, according to Gilles. Fit the grips with their clamping mechanism, leave a small gap to the switch housing and check that the throttle turns freely and snaps back on its own.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Gilles Tooling\u003c\/li\u003e\n\u003cli\u003eSeries: HG-01\u003c\/li\u003e\n\u003cli\u003ePart number: HG-01-KIT\u003c\/li\u003e\n\u003cli\u003eType: Handlebar grips, pair\u003c\/li\u003e\n\u003cli\u003eMaterial: Aluminium, milled from solid\u003c\/li\u003e\n\u003cli\u003eDimensions: Ø 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eThrottle side: Throttle tube Ø 25–25.7 mm, continuous\u003c\/li\u003e\n\u003cli\u003eClutch side: Handlebar Ø 22–22.4 mm, continuous\u003c\/li\u003e\n\u003cli\u003eFitment: Honda CBR300R (2015–2020)\u003c\/li\u003e\n\u003cli\u003eRoad approval: No entry in the Gilles list\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gilles Tooling","offers":[{"title":"Default Title","offer_id":53784062329098,"sku":"HG-01-KIT","price":61.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/HG-01-KIT_1_9229cdb3-fe43-4115-9a8d-6daffa0c5a8c.png?v=1790025416"},{"product_id":"gilles-hg-01-handlebar-grips-honda-cbr500r-2013-2015-hg-01-kit","title":"Gilles HG-01 Handlebar Grips Honda CBR500R (2013-2015) – HG-01-KIT","description":"\u003cp\u003eThe first CBR500R is a light sports twin that many riders use for their first track days. Gilles' HG-01 grips give its clip-ons a racier feel: machined aluminium instead of rubber, silver, in an ergonomic shape.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThrottle tube with a continuous 25 to 25.7 mm diameter; clutch side 22 to 22.4 mm\u003c\/li\u003e\n\u003cli\u003eNot for inch handlebars or bikes with heated grips\u003c\/li\u003e\n\u003cli\u003eMilled from solid aluminium\u003c\/li\u003e\n\u003cli\u003eGood grip with an ergonomic, slim shape\u003c\/li\u003e\n\u003cli\u003eClamping mechanism for quick fitting\u003c\/li\u003e\n\u003cli\u003eRegistration: no Gilles entry, ask us\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eType PC44\u003c\/h2\u003e\n\u003cp\u003eGilles lists the CBR500R of 2013 to 2015.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eFor the Honda CBR500R, Gilles gives no registration information for these grips. We therefore make no claim about approval; ask us if you need one for your bike. After fitting, check that the throttle snaps back by itself at every handlebar position.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eA pair of HG-01 grips in silver, ready to fit with the integrated clamping mechanism.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eBefore fitting, make sure your bike has no heated grips and no inch handlebar; the HG-01 does not fit either. Slide the grips on, tighten the clamping mechanism evenly and check the throttle at full lock in both directions: it must return to closed by itself.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Gilles Tooling\u003c\/li\u003e\n\u003cli\u003eSeries: HG-01\u003c\/li\u003e\n\u003cli\u003ePart number: HG-01-KIT\u003c\/li\u003e\n\u003cli\u003eType: Handlebar grips, pair\u003c\/li\u003e\n\u003cli\u003eMaterial: Aluminium, milled from solid\u003c\/li\u003e\n\u003cli\u003eDimensions: Ø 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eThrottle side: Throttle tube Ø 25–25.7 mm, continuous\u003c\/li\u003e\n\u003cli\u003eClutch side: Handlebar Ø 22–22.4 mm, continuous\u003c\/li\u003e\n\u003cli\u003eFitment: Honda CBR500R (2013–2015)\u003c\/li\u003e\n\u003cli\u003eRoad approval: No entry in the Gilles list\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gilles Tooling","offers":[{"title":"Default Title","offer_id":53784062492938,"sku":"HG-01-KIT","price":61.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/HG-01-KIT_1_933ddcad-1842-4abe-8b18-066b48f1bd36.png?v=1790025421"},{"product_id":"gilles-hg-01-handlebar-grips-honda-cbr650f-2014-2015-hg-01-kit","title":"Gilles HG-01 Handlebar Grips Honda CBR650F (2014-2015) – HG-01-KIT","description":"\u003cp\u003eThe half-faired CBR650F is a sporty everyday bike, and its handlebar sits comfortably high for a sports bike. Gilles' HG-01 grips replace the standard rubber with silver aluminium, milled from solid and held by a clamping mechanism, with an outer diameter of 32.5 mm. Owners who use the bike all year round should know that metal grips feel colder in winter, so good gloves help.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThrottle tube with a continuous 25 to 25.7 mm diameter; clutch side 22 to 22.4 mm\u003c\/li\u003e\n\u003cli\u003eMilled from solid aluminium\u003c\/li\u003e\n\u003cli\u003eGood grip with an ergonomic, slim shape\u003c\/li\u003e\n\u003cli\u003eClamping mechanism for quick fitting\u003c\/li\u003e\n\u003cli\u003eOuter diameter 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eRegistration: no Gilles entry, ask us\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eType RC74\u003c\/h2\u003e\n\u003cp\u003eListed for 2014 and 2015.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eGilles lists the HG-01 for the Honda CBR650F without any statement on registration. Please contact us if you need clarification for road use. Whatever the paperwork, the throttle must close by itself and the controls must remain easy to reach.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eA pair of HG-01 grips in silver, ready to fit with the integrated clamping mechanism.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eTake the old grips off, clean everything and measure the throttle tube. Mount the Gilles grips, tighten the clamps and test the throttle several times before riding. If the throttle does not snap back freely, correct the position before the first ride.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Gilles Tooling\u003c\/li\u003e\n\u003cli\u003eSeries: HG-01\u003c\/li\u003e\n\u003cli\u003ePart number: HG-01-KIT\u003c\/li\u003e\n\u003cli\u003eType: Handlebar grips, pair\u003c\/li\u003e\n\u003cli\u003eMaterial: Aluminium, milled from solid\u003c\/li\u003e\n\u003cli\u003eDimensions: Ø 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eThrottle side: Throttle tube Ø 25–25.7 mm, continuous\u003c\/li\u003e\n\u003cli\u003eClutch side: Handlebar Ø 22–22.4 mm, continuous\u003c\/li\u003e\n\u003cli\u003eFitment: Honda CBR650F (2014–2015)\u003c\/li\u003e\n\u003cli\u003eRoad approval: No entry in the Gilles list\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gilles Tooling","offers":[{"title":"Default Title","offer_id":53784062656778,"sku":"HG-01-KIT","price":61.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/HG-01-KIT_1_346c999c-d40b-496e-a285-27bd30865a47.png?v=1790025425"},{"product_id":"gilles-hg-01-handlebar-grips-honda-crossrunner-2011-2026-hg-01-kit","title":"Gilles HG-01 Handlebar Grips Honda CROSSRUNNER (2011-2026) – HG-01-KIT","description":"\u003cp\u003eThe Crossrunner combines the VFR's V4 with an upright riding position, a bike for long days on country roads. Later models were often equipped with heated grips, and Gilles does not recommend the HG-01 on bikes with heated grips. Without them, the aluminium grips give the Crossrunner a more technical cockpit.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThrottle tube with a continuous 25 to 25.7 mm diameter; clutch side 22 to 22.4 mm\u003c\/li\u003e\n\u003cli\u003eGood grip with an ergonomic, slim shape\u003c\/li\u003e\n\u003cli\u003eClamping mechanism for quick fitting\u003c\/li\u003e\n\u003cli\u003eOuter diameter 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eNot for inch handlebars or bikes with heated grips\u003c\/li\u003e\n\u003cli\u003eRegistration: no Gilles entry, ask us\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eType RC60\u003c\/h2\u003e\n\u003cp\u003eGilles lists the Crossrunner from 2011 without an end year.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eGilles' fitment list has no registration entry for the HG-01 grips on the Honda CROSSRUNNER, so we cannot quote a Gilles statement on road use here. What matters in any case: the throttle must turn freely and return to closed on its own, and the switches must stay fully usable. If you need a definite answer for your motorcycle, ask us before ordering.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eOne pair of Gilles HG-01 handlebar grips in silver, for the throttle side and the clutch side.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eRemove the original grips and clean the throttle tube and the handlebar. Check the diameters first: the throttle tube needs a continuous 25 to 25.7 mm, the clutch side 22 to 22.4 mm; plastic ribs on some throttle tubes may have to be removed, at your own discretion, according to Gilles. Fit the grips with their clamping mechanism, leave a small gap to the switch housing and check that the throttle turns freely and snaps back on its own.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Gilles Tooling\u003c\/li\u003e\n\u003cli\u003eSeries: HG-01\u003c\/li\u003e\n\u003cli\u003ePart number: HG-01-KIT\u003c\/li\u003e\n\u003cli\u003eType: Handlebar grips, pair\u003c\/li\u003e\n\u003cli\u003eMaterial: Aluminium, milled from solid\u003c\/li\u003e\n\u003cli\u003eDimensions: Ø 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eThrottle side: Throttle tube Ø 25–25.7 mm, continuous\u003c\/li\u003e\n\u003cli\u003eClutch side: Handlebar Ø 22–22.4 mm, continuous\u003c\/li\u003e\n\u003cli\u003eFitment: Honda CROSSRUNNER (2011–2026)\u003c\/li\u003e\n\u003cli\u003eRoad approval: No entry in the Gilles list\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gilles Tooling","offers":[{"title":"Default Title","offer_id":53784062689546,"sku":"HG-01-KIT","price":61.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/HG-01-KIT_1_3df9e218-f25c-43ae-8e92-eed28f12a995.png?v=1790025430"},{"product_id":"gilles-hg-01-handlebar-grips-honda-crosstourer-2013-2016-hg-01-kit","title":"Gilles HG-01 Handlebar Grips Honda CROSSTOURER (2013-2016) – HG-01-KIT","description":"\u003cp\u003eThe Crosstourer is a big V4 adventure bike, often with DCT and touring accessories. Before ordering the HG-01, check that yours has no heated grips; Gilles excludes those bikes. On a Crosstourer without them, the silver aluminium grips replace the rubber with a slim, firm profile.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThrottle tube with a continuous 25 to 25.7 mm diameter; clutch side 22 to 22.4 mm\u003c\/li\u003e\n\u003cli\u003eClamping mechanism for quick fitting\u003c\/li\u003e\n\u003cli\u003eOuter diameter 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eNot for inch handlebars or bikes with heated grips\u003c\/li\u003e\n\u003cli\u003eMilled from solid aluminium\u003c\/li\u003e\n\u003cli\u003eRegistration: no Gilles entry, ask us\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eType SC70\u003c\/h2\u003e\n\u003cp\u003eListed for 2013 to 2016.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eFor the Honda CROSSTOURER, Gilles gives no registration information for these grips. We therefore make no claim about approval; ask us if you need one for your bike. After fitting, check that the throttle snaps back by itself at every handlebar position.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eOne pair of Gilles HG-01 handlebar grips in silver, for the throttle side and the clutch side.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eBefore fitting, make sure your bike has no heated grips and no inch handlebar; the HG-01 does not fit either. Slide the grips on, tighten the clamping mechanism evenly and check the throttle at full lock in both directions: it must return to closed by itself.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Gilles Tooling\u003c\/li\u003e\n\u003cli\u003eSeries: HG-01\u003c\/li\u003e\n\u003cli\u003ePart number: HG-01-KIT\u003c\/li\u003e\n\u003cli\u003eType: Handlebar grips, pair\u003c\/li\u003e\n\u003cli\u003eMaterial: Aluminium, milled from solid\u003c\/li\u003e\n\u003cli\u003eDimensions: Ø 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eThrottle side: Throttle tube Ø 25–25.7 mm, continuous\u003c\/li\u003e\n\u003cli\u003eClutch side: Handlebar Ø 22–22.4 mm, continuous\u003c\/li\u003e\n\u003cli\u003eFitment: Honda CROSSTOURER (2013–2016)\u003c\/li\u003e\n\u003cli\u003eRoad approval: No entry in the Gilles list\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gilles Tooling","offers":[{"title":"Default Title","offer_id":53784062853386,"sku":"HG-01-KIT","price":61.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/HG-01-KIT_1_1b546dad-3090-4d3f-86fd-c6774757bf57.png?v=1790025434"},{"product_id":"gilles-hg-01-handlebar-grips-honda-nc750s-2014-2020-hg-01-kit","title":"Gilles HG-01 Handlebar Grips Honda NC750S (2014-2020) – HG-01-KIT","description":"\u003cp\u003eThe NC750S has a storage compartment where the tank would be, and it is available with a DCT gearbox, in which case there is no clutch lever. Gilles' HG-01 grips fit either version: silver aluminium on both sides, 118 mm long, with a clutch-side diameter of 22 to 22.4 mm.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThrottle tube with a continuous 25 to 25.7 mm diameter; clutch side 22 to 22.4 mm\u003c\/li\u003e\n\u003cli\u003eOuter diameter 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eNot for inch handlebars or bikes with heated grips\u003c\/li\u003e\n\u003cli\u003eMilled from solid aluminium\u003c\/li\u003e\n\u003cli\u003eGood grip with an ergonomic, slim shape\u003c\/li\u003e\n\u003cli\u003eRegistration: no Gilles entry, ask us\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eRC70 and RC90\u003c\/h2\u003e\n\u003cp\u003eListed for 2014 to 2015 and 2016 to 2020.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eGilles lists the HG-01 for the Honda NC750S without any statement on registration. Please contact us if you need clarification for road use. Whatever the paperwork, the throttle must close by itself and the controls must remain easy to reach.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eThe HG-01 grip set: two milled aluminium grips with their clamping mechanism, silver.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eTake the old grips off, clean everything and measure the throttle tube. Mount the Gilles grips, tighten the clamps and test the throttle several times before riding. If the throttle does not snap back freely, correct the position before the first ride.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Gilles Tooling\u003c\/li\u003e\n\u003cli\u003eSeries: HG-01\u003c\/li\u003e\n\u003cli\u003ePart number: HG-01-KIT\u003c\/li\u003e\n\u003cli\u003eType: Handlebar grips, pair\u003c\/li\u003e\n\u003cli\u003eMaterial: Aluminium, milled from solid\u003c\/li\u003e\n\u003cli\u003eDimensions: Ø 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eThrottle side: Throttle tube Ø 25–25.7 mm, continuous\u003c\/li\u003e\n\u003cli\u003eClutch side: Handlebar Ø 22–22.4 mm, continuous\u003c\/li\u003e\n\u003cli\u003eFitment: Honda NC750S (2014–2020)\u003c\/li\u003e\n\u003cli\u003eRoad approval: No entry in the Gilles list\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gilles Tooling","offers":[{"title":"Default Title","offer_id":53784062886154,"sku":"HG-01-KIT","price":61.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/HG-01-KIT_1_222a7412-f012-43e6-a4c4-0efa789f6a87.png?v=1790025439"},{"product_id":"gilles-hg-01-handlebar-grips-honda-nc750x-2014-2020-hg-01-kit","title":"Gilles HG-01 Handlebar Grips Honda NC750X (2014-2020) – HG-01-KIT","description":"\u003cp\u003eThe NC750X is a practical travel bike that is often used all year round, and many owners fit heated grips for winter. Gilles does not recommend the HG-01 on bikes with heated grips. For an NC750X without them, the milled aluminium grips are a durable replacement for worn rubber ones.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThrottle tube with a continuous 25 to 25.7 mm diameter; clutch side 22 to 22.4 mm\u003c\/li\u003e\n\u003cli\u003eNot for inch handlebars or bikes with heated grips\u003c\/li\u003e\n\u003cli\u003eMilled from solid aluminium\u003c\/li\u003e\n\u003cli\u003eGood grip with an ergonomic, slim shape\u003c\/li\u003e\n\u003cli\u003eClamping mechanism for quick fitting\u003c\/li\u003e\n\u003cli\u003eRegistration: no Gilles entry, ask us\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eRC70 and RC90\u003c\/h2\u003e\n\u003cp\u003eGilles lists the NC750X from 2014 to 2015 and from 2016 to 2020.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eGilles' fitment list has no registration entry for the HG-01 grips on the Honda NC750X, so we cannot quote a Gilles statement on road use here. What matters in any case: the throttle must turn freely and return to closed on its own, and the switches must stay fully usable. If you need a definite answer for your motorcycle, ask us before ordering.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eThe HG-01 grip set: two milled aluminium grips with their clamping mechanism, silver.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eRemove the original grips and clean the throttle tube and the handlebar. Check the diameters first: the throttle tube needs a continuous 25 to 25.7 mm, the clutch side 22 to 22.4 mm; plastic ribs on some throttle tubes may have to be removed, at your own discretion, according to Gilles. Fit the grips with their clamping mechanism, leave a small gap to the switch housing and check that the throttle turns freely and snaps back on its own.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Gilles Tooling\u003c\/li\u003e\n\u003cli\u003eSeries: HG-01\u003c\/li\u003e\n\u003cli\u003ePart number: HG-01-KIT\u003c\/li\u003e\n\u003cli\u003eType: Handlebar grips, pair\u003c\/li\u003e\n\u003cli\u003eMaterial: Aluminium, milled from solid\u003c\/li\u003e\n\u003cli\u003eDimensions: Ø 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eThrottle side: Throttle tube Ø 25–25.7 mm, continuous\u003c\/li\u003e\n\u003cli\u003eClutch side: Handlebar Ø 22–22.4 mm, continuous\u003c\/li\u003e\n\u003cli\u003eFitment: Honda NC750X (2014–2020)\u003c\/li\u003e\n\u003cli\u003eRoad approval: No entry in the Gilles list\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gilles Tooling","offers":[{"title":"Default Title","offer_id":53784063082762,"sku":"HG-01-KIT","price":61.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/HG-01-KIT_1_749e01bf-6f76-4f68-8186-6a6f4f69d54a.png?v=1790025444"},{"product_id":"gilles-hg-01-handlebar-grips-honda-nsf-250-r-2012-2026-hg-01-kit","title":"Gilles HG-01 Handlebar Grips Honda NSF 250 R (2012-2026) – HG-01-KIT","description":"\u003cp\u003eThe NSF 250 R is a Moto3 racing machine, and on the track the grips are the rider's main connection to the bike. Gilles' HG-01 grips are milled from solid aluminium and have a slim shape with good grip; on the right, they need a continuous throttle tube of 25 to 25.7 mm.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThrottle tube with a continuous 25 to 25.7 mm diameter; clutch side 22 to 22.4 mm\u003c\/li\u003e\n\u003cli\u003eMilled from solid aluminium\u003c\/li\u003e\n\u003cli\u003eGood grip with an ergonomic, slim shape\u003c\/li\u003e\n\u003cli\u003eClamping mechanism for quick fitting\u003c\/li\u003e\n\u003cli\u003eOuter diameter 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eRegistration: no Gilles entry, ask us\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrom 2012\u003c\/h2\u003e\n\u003cp\u003eGilles lists the NSF 250 R without a type code.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eFor the Honda NSF 250 R, Gilles gives no registration information for these grips. We therefore make no claim about approval; ask us if you need one for your bike. After fitting, check that the throttle snaps back by itself at every handlebar position.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eA pair of HG-01 grips in silver, ready to fit with the integrated clamping mechanism.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eBefore fitting, make sure your bike has no heated grips and no inch handlebar; the HG-01 does not fit either. Slide the grips on, tighten the clamping mechanism evenly and check the throttle at full lock in both directions: it must return to closed by itself.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Gilles Tooling\u003c\/li\u003e\n\u003cli\u003eSeries: HG-01\u003c\/li\u003e\n\u003cli\u003ePart number: HG-01-KIT\u003c\/li\u003e\n\u003cli\u003eType: Handlebar grips, pair\u003c\/li\u003e\n\u003cli\u003eMaterial: Aluminium, milled from solid\u003c\/li\u003e\n\u003cli\u003eDimensions: Ø 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eThrottle side: Throttle tube Ø 25–25.7 mm, continuous\u003c\/li\u003e\n\u003cli\u003eClutch side: Handlebar Ø 22–22.4 mm, continuous\u003c\/li\u003e\n\u003cli\u003eFitment: Honda NSF 250 R (2012–2026)\u003c\/li\u003e\n\u003cli\u003eRoad approval: No entry in the Gilles list\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gilles Tooling","offers":[{"title":"Default Title","offer_id":53784063115530,"sku":"HG-01-KIT","price":61.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/HG-01-KIT_1_dfc0f1b6-c7b7-4879-b320-8f8ddf45b052.png?v=1790025448"},{"product_id":"gilles-hg-01-handlebar-grips-honda-vfr-1200-f-2010-2017-hg-01-kit","title":"Gilles HG-01 Handlebar Grips Honda VFR 1200 F (2010-2017) – HG-01-KIT","description":"\u003cp\u003eThe VFR1200F is a sports tourer with a V4 engine, and its riders often cover long distances. Heated grips are common on such bikes, and Gilles does not recommend the HG-01 for bikes that have them. On a VFR without heated grips, the aluminium grips give the handlebar a sporty, machined look.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThrottle tube with a continuous 25 to 25.7 mm diameter; clutch side 22 to 22.4 mm\u003c\/li\u003e\n\u003cli\u003eGood grip with an ergonomic, slim shape\u003c\/li\u003e\n\u003cli\u003eClamping mechanism for quick fitting\u003c\/li\u003e\n\u003cli\u003eOuter diameter 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eNot for inch handlebars or bikes with heated grips\u003c\/li\u003e\n\u003cli\u003eRegistration: no Gilles entry, ask us\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eType SC63\u003c\/h2\u003e\n\u003cp\u003eListed for 2010 to 2017. The DCT version has its own page.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eGilles lists the HG-01 for the Honda VFR 1200 F without any statement on registration. Please contact us if you need clarification for road use. Whatever the paperwork, the throttle must close by itself and the controls must remain easy to reach.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eA pair of HG-01 grips in silver, ready to fit with the integrated clamping mechanism.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eTake the old grips off, clean everything and measure the throttle tube. Mount the Gilles grips, tighten the clamps and test the throttle several times before riding. If the throttle does not snap back freely, correct the position before the first ride.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Gilles Tooling\u003c\/li\u003e\n\u003cli\u003eSeries: HG-01\u003c\/li\u003e\n\u003cli\u003ePart number: HG-01-KIT\u003c\/li\u003e\n\u003cli\u003eType: Handlebar grips, pair\u003c\/li\u003e\n\u003cli\u003eMaterial: Aluminium, milled from solid\u003c\/li\u003e\n\u003cli\u003eDimensions: Ø 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eThrottle side: Throttle tube Ø 25–25.7 mm, continuous\u003c\/li\u003e\n\u003cli\u003eClutch side: Handlebar Ø 22–22.4 mm, continuous\u003c\/li\u003e\n\u003cli\u003eFitment: Honda VFR 1200 F (2010–2017)\u003c\/li\u003e\n\u003cli\u003eRoad approval: No entry in the Gilles list\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gilles Tooling","offers":[{"title":"Default Title","offer_id":53784063181066,"sku":"HG-01-KIT","price":61.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/HG-01-KIT_1_ce2f0cb9-9d10-4768-a7f1-72eaba294746.png?v=1790025453"},{"product_id":"gilles-hg-01-handlebar-grips-honda-vfr-1200-f-dct-2010-2017-hg-01-kit","title":"Gilles HG-01 Handlebar Grips Honda VFR 1200 F DCT (2010-2017) – HG-01-KIT","description":"\u003cp\u003eWith the dual-clutch gearbox, the VFR1200F DCT has no clutch lever, and the left hand only has to steer and operate the switches. Gilles' HG-01 grips suit both sides of the bar: silver aluminium, 32.5 mm in diameter, clamped in place.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThrottle tube with a continuous 25 to 25.7 mm diameter; clutch side 22 to 22.4 mm\u003c\/li\u003e\n\u003cli\u003eClamping mechanism for quick fitting\u003c\/li\u003e\n\u003cli\u003eOuter diameter 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eNot for inch handlebars or bikes with heated grips\u003c\/li\u003e\n\u003cli\u003eMilled from solid aluminium\u003c\/li\u003e\n\u003cli\u003eRegistration: no Gilles entry, ask us\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eType SC63\u003c\/h2\u003e\n\u003cp\u003eGilles lists the VFR 1200 F with DCT from 2010 to 2017.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eGilles' fitment list has no registration entry for the HG-01 grips on the Honda VFR 1200 F DCT, so we cannot quote a Gilles statement on road use here. What matters in any case: the throttle must turn freely and return to closed on its own, and the switches must stay fully usable. If you need a definite answer for your motorcycle, ask us before ordering.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eOne pair of Gilles HG-01 handlebar grips in silver, for the throttle side and the clutch side.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eRemove the original grips and clean the throttle tube and the handlebar. Check the diameters first: the throttle tube needs a continuous 25 to 25.7 mm, the clutch side 22 to 22.4 mm; plastic ribs on some throttle tubes may have to be removed, at your own discretion, according to Gilles. Fit the grips with their clamping mechanism, leave a small gap to the switch housing and check that the throttle turns freely and snaps back on its own.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Gilles Tooling\u003c\/li\u003e\n\u003cli\u003eSeries: HG-01\u003c\/li\u003e\n\u003cli\u003ePart number: HG-01-KIT\u003c\/li\u003e\n\u003cli\u003eType: Handlebar grips, pair\u003c\/li\u003e\n\u003cli\u003eMaterial: Aluminium, milled from solid\u003c\/li\u003e\n\u003cli\u003eDimensions: Ø 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eThrottle side: Throttle tube Ø 25–25.7 mm, continuous\u003c\/li\u003e\n\u003cli\u003eClutch side: Handlebar Ø 22–22.4 mm, continuous\u003c\/li\u003e\n\u003cli\u003eFitment: Honda VFR 1200 F DCT (2010–2017)\u003c\/li\u003e\n\u003cli\u003eRoad approval: No entry in the Gilles list\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gilles Tooling","offers":[{"title":"Default Title","offer_id":53784063213834,"sku":"HG-01-KIT","price":61.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/HG-01-KIT_1_922cd344-0efd-4028-8c8b-97653ad529a6.png?v=1790025458"},{"product_id":"gilles-hg-01-handlebar-grips-husqvarna-vitpilen-701-2016-2026-hg-01-kit","title":"Gilles HG-01 Handlebar Grips Husqvarna VITPILEN 701 (2016-2026) – HG-01-KIT","description":"\u003cp\u003eThe Vitpilen 701 is defined by its minimalist design, with a low handlebar and few, carefully shaped parts. Gilles' HG-01 grips follow that idea: a plain aluminium body, milled from solid, silver, with an ergonomic, slim form.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThrottle tube with a continuous 25 to 25.7 mm diameter; clutch side 22 to 22.4 mm\u003c\/li\u003e\n\u003cli\u003eOuter diameter 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eNot for inch handlebars or bikes with heated grips\u003c\/li\u003e\n\u003cli\u003eMilled from solid aluminium\u003c\/li\u003e\n\u003cli\u003eGood grip with an ergonomic, slim shape\u003c\/li\u003e\n\u003cli\u003eRegistration: no Gilles entry, ask us\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eType HQV701\u003c\/h2\u003e\n\u003cp\u003eListed from 2016 without an end year.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eFor the Husqvarna VITPILEN 701, Gilles gives no registration information for these grips. We therefore make no claim about approval; ask us if you need one for your bike. After fitting, check that the throttle snaps back by itself at every handlebar position.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eOne pair of Gilles HG-01 handlebar grips in silver, for the throttle side and the clutch side.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eBefore fitting, make sure your bike has no heated grips and no inch handlebar; the HG-01 does not fit either. Slide the grips on, tighten the clamping mechanism evenly and check the throttle at full lock in both directions: it must return to closed by itself.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Gilles Tooling\u003c\/li\u003e\n\u003cli\u003eSeries: HG-01\u003c\/li\u003e\n\u003cli\u003ePart number: HG-01-KIT\u003c\/li\u003e\n\u003cli\u003eType: Handlebar grips, pair\u003c\/li\u003e\n\u003cli\u003eMaterial: Aluminium, milled from solid\u003c\/li\u003e\n\u003cli\u003eDimensions: Ø 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eThrottle side: Throttle tube Ø 25–25.7 mm, continuous\u003c\/li\u003e\n\u003cli\u003eClutch side: Handlebar Ø 22–22.4 mm, continuous\u003c\/li\u003e\n\u003cli\u003eFitment: Husqvarna VITPILEN 701 (2016–2026)\u003c\/li\u003e\n\u003cli\u003eRoad approval: No entry in the Gilles list\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gilles Tooling","offers":[{"title":"Default Title","offer_id":53784063246602,"sku":"HG-01-KIT","price":61.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/HG-01-KIT_1_6f00e9b6-43c6-4bd7-9d63-d2f58b10e3cf.png?v=1790025463"},{"product_id":"gilles-hg-01-handlebar-grips-ktm-1190-adventure-2013-2016-hg-01-kit","title":"Gilles HG-01 Handlebar Grips KTM 1190 ADVENTURE (2013-2016) – HG-01-KIT","description":"\u003cp\u003eThe 1190 Adventure is a long-distance bike, and heated grips were a popular option for it. If yours has them, Gilles advises against the HG-01. On an Adventure without heated grips, the aluminium grips replace the rubber ones: 118 mm long, 32.5 mm in diameter, held by a clamping mechanism.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThrottle tube with a continuous 25 to 25.7 mm diameter; clutch side 22 to 22.4 mm\u003c\/li\u003e\n\u003cli\u003eNot for inch handlebars or bikes with heated grips\u003c\/li\u003e\n\u003cli\u003eMilled from solid aluminium\u003c\/li\u003e\n\u003cli\u003eGood grip with an ergonomic, slim shape\u003c\/li\u003e\n\u003cli\u003eClamping mechanism for quick fitting\u003c\/li\u003e\n\u003cli\u003eRegistration: no Gilles entry, ask us\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eType A2\u003c\/h2\u003e\n\u003cp\u003eListed for 2013 to 2016. The 1190 Adventure R has its own page.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eGilles lists the HG-01 for the KTM 1190 ADVENTURE without any statement on registration. Please contact us if you need clarification for road use. Whatever the paperwork, the throttle must close by itself and the controls must remain easy to reach.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eThe HG-01 grip set: two milled aluminium grips with their clamping mechanism, silver.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eTake the old grips off, clean everything and measure the throttle tube. Mount the Gilles grips, tighten the clamps and test the throttle several times before riding. If the throttle does not snap back freely, correct the position before the first ride.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Gilles Tooling\u003c\/li\u003e\n\u003cli\u003eSeries: HG-01\u003c\/li\u003e\n\u003cli\u003ePart number: HG-01-KIT\u003c\/li\u003e\n\u003cli\u003eType: Handlebar grips, pair\u003c\/li\u003e\n\u003cli\u003eMaterial: Aluminium, milled from solid\u003c\/li\u003e\n\u003cli\u003eDimensions: Ø 32.5 mm, length 118 mm\u003c\/li\u003e\n\u003cli\u003eThrottle side: Throttle tube Ø 25–25.7 mm, continuous\u003c\/li\u003e\n\u003cli\u003eClutch side: Handlebar Ø 22–22.4 mm, continuous\u003c\/li\u003e\n\u003cli\u003eFitment: KTM 1190 ADVENTURE (2013–2016)\u003c\/li\u003e\n\u003cli\u003eRoad approval: No entry in the Gilles list\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gilles Tooling","offers":[{"title":"Default Title","offer_id":53784063279370,"sku":"HG-01-KIT","price":61.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/HG-01-KIT_1_9284a71d-0aaa-41d9-ab49-bdbabc98682c.png?v=1790025468"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/collections\/JP_ACC_140Side_0eb49afd-1d4c-4f8e-9ebd-4f8ef9514c7e.png?v=1785222949","url":"https:\/\/inter-pace.com\/de-at\/collections\/griffe.oembed","provider":"Inter-Pace","version":"1.0","type":"link"}