{"title":"Protectors","description":null,"products":[{"product_id":"aluminium-schutzdeckel-spider-racing-bmw-s1000rr-k67","title":"Spider Racing Aluminium Engine Case Cover BMW S1000RR K67 (2019-2026) – Part 20.B186","description":"\u003cp\u003eSpider Racing's engine case cover for the BMW S1000RR K67 is where Italian craftsmanship meets track-proven protection. CNC-machined from high-strength aluminium alloy and finished in a hard black anodised coat, it delivers the kind of purposeful, factory-quality aesthetic that looks as serious as its job: shielding the engine casing in the event of a get-off, without adding meaningful weight to your S1000RR.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCNC-machined from solid high-strength aluminium alloy for precise fitment and exceptional structural integrity.\u003c\/li\u003e\n\u003cli\u003eHard black anodised finish increases surface hardness and corrosion resistance while giving the cover a clean, sporting appearance that complements the S1000RR's aggressive lines.\u003c\/li\u003e\n\u003cli\u003eDesigned specifically for the BMW S1000RR K67 (2019-2026) — a direct, no-modification installation that replaces or covers the original engine casing.\u003c\/li\u003e\n\u003cli\u003eLightweight construction adds meaningful crash protection with negligible impact on the overall weight of the motorcycle.\u003c\/li\u003e\n\u003cli\u003e100% Made in Italy by Spider Racing, a manufacturer with deep roots in precision aluminium components for road and track use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign, Finish and Heritage\u003c\/h2\u003e\u003cp\u003eSpider Racing has built its reputation on components that earn their place on a motorcycle through the quality of their manufacture rather than marketing alone. This engine case cover reflects that philosophy: every surface has been machined to tight tolerances on CNC equipment, then anodised in black to a depth and hardness that resists scratching and oxidation over years of hard use. The result is a part that stands apart from generic aftermarket covers — the finish is consistent, the edges are crisp, and the fitment is exact. For S1000RR owners who pay attention to such details, it reads immediately as a genuine Italian piece.\u003c\/p\u003e\u003ch2\u003eProtection and Purpose\u003c\/h2\u003e\u003cp\u003eEven a low-speed drop on a track day or a tip-over in the paddock can crack or score an exposed engine case, turning a minor incident into an expensive engine-out repair. The Spider Racing cover sits over the vulnerable casing, absorbing and distributing impact energy through its aluminium structure rather than allowing direct contact with the casting beneath. It is equally at home protecting a road-registered S1000RR on a spirited B-road run as it is on a trackday bike being pushed to its limits at a circuit.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis cover is engineered exclusively for the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBMW S1000RR K67 — model years 2019 to 2026\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eAlways verify your chassis code and model year before ordering. If you are unsure of compatibility, the Inter-Pace team is on hand to confirm fitment before you buy.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eSpider Racing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003e20.B186\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eHigh-strength aluminium alloy, CNC-machined\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurface finish\u003c\/td\u003e\n\u003ctd\u003eBlack anodised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of manufacture\u003c\/td\u003e\n\u003ctd\u003eItaly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eBMW S1000RR K67 (2019-2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eEngine case protection in the event of a crash\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Spider Racing","offers":[{"title":"Kit (20.B186)","offer_id":53167218852106,"sku":"20.B186","price":432.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/BMWK67COVERS.png?v=1780793342"},{"product_id":"trockenkupplung-abdeckung-airflow-booster-spider-ducati-panigale-v4-r","title":"Spider Racing Dry Clutch Cover and Airflow Booster for Ducati Panigale V4 R (2019–2024) – 20.D205","description":"\u003cp\u003eA dry clutch running hard on the street or at the track generates serious heat, and the Spider Racing Dry Clutch Cover with integrated Airflow Booster is engineered to handle exactly that. Designed specifically for the Ducati Panigale V4 R (2019–2024), this CNC-machined aluminium cover increases airflow to the clutch by up to 300%, keeping temperatures in check during every ride — whether that is a spirited Sunday blast or a full track day.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eIntegrated Airflow Booster channels up to 300% more air directly to the dry clutch, delivering a meaningful reduction in operating temperature.\u003c\/li\u003e\n\u003cli\u003eMachined from solid billet aluminium using CNC precision processes for consistent quality and long service life.\u003c\/li\u003e\n\u003cli\u003eReinforced strut construction at all contact points substantially reduces the risk of cracking in the event of a fall.\u003c\/li\u003e\n\u003cli\u003eEngineered for both road use and circuit duty — a single purchase that earns its keep in every environment.\u003c\/li\u003e\n\u003cli\u003eDirect OEM replacement fitment; no modifications required for the Panigale V4 R.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuilt for Real-World Reliability\u003c\/h2\u003e\u003cp\u003eUnlike decorative covers that prioritise looks over function, the Spider Racing 20.D205 combines purposeful aerodynamic design with structural integrity. The open lattice sections that drive the Airflow Booster are framed by reinforced struts — load-bearing ribs positioned at the most vulnerable contact zones. The result is a cover that protects the clutch mechanically from damage while also protecting it thermally from the heat that shortens clutch life and degrades feel. For riders who use their Panigale regularly, that combination of protection and cooling translates directly into longer service intervals and more consistent clutch engagement.\u003c\/p\u003e\u003ch2\u003eTrack and Road Performance\u003c\/h2\u003e\u003cp\u003eDucati's dry clutch is one of the most characterful elements of the Panigale V4 R — the mechanical rattle at idle, the crisp engagement, the direct power transfer. Keeping it cool preserves all of that character. On circuit, where clutch abuse during corner entries and standing starts is unavoidable, the 300% improvement in airflow is immediately relevant. On the road, the same benefit extends clutch life and maintains the precise lever feel the V4 R is celebrated for. Spider Racing has tuned the cover's open geometry to maximise airflow without sacrificing the structural rigidity needed for reliable crash protection.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eDucati Panigale V4 R — 2019, 2020, 2021, 2022, 2023, 2024\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eSpider Racing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003e20.D205\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eBillet aluminium, CNC-machined\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eDry clutch cover with integrated Airflow Booster\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAirflow improvement\u003c\/td\u003e\n\u003ctd\u003eUp to 300% increased airflow to the clutch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eReinforced strut design at contact points\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eDucati Panigale V4 R (2019–2024)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntended use\u003c\/td\u003e\n\u003ctd\u003eRoad and track\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Spider Racing","offers":[{"title":"Black","offer_id":53167218884874,"sku":"20.D205-01","price":234.08,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":53167218917642,"sku":"20.D205-02","price":234.08,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":53167218950410,"sku":"20.D205-03","price":234.08,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/BLACKDSC5547-Modifica.png?v=1780793342"},{"product_id":"aluminium-schutzdeckel-spider-racing-ducati-panigale-v4","title":"Spider Racing Aluminium Engine Cover for Ducati Panigale V4\/S (2018–2024) – Part 20.D164","description":"\u003cp\u003eWhen the lap times matter and every trackday incident carries real cost, protecting the Ducati Panigale V4\/S engine casing is a straightforward priority. Spider Racing's CNC-machined aluminium engine cover — part 20.D164 — is built precisely for that purpose: absorbing and deflecting crash energy so the cases beneath stay intact, whether you're chasing circuit PBs or putting serious road miles on your V4.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCNC-machined from high-strength aluminium alloy for a precise OEM-quality fit and outstanding structural rigidity\u003c\/li\u003e\n\u003cli\u003eBlack anodised finish resists corrosion, abrasion and heat — retaining its appearance under sustained track use\u003c\/li\u003e\n\u003cli\u003ePurpose-designed to shield the Panigale V4\/S engine casing from damage in the event of a crash or tip-over\u003c\/li\u003e\n\u003cli\u003eMinimal added mass keeps the V4's class-leading power-to-weight ratio intact\u003c\/li\u003e\n\u003cli\u003ePrecision-manufactured in Italy by Spider Racing to exacting quality standards\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTrack-Proven Protection for the Panigale V4\/S\u003c\/h2\u003e\u003cp\u003eThe Ducati Panigale V4\/S engine is both the heart of the machine and one of its most expensive components to repair. On track, even a low-speed slide or a paddock tip-over can cause catastrophic case damage. Spider Racing engineered this cover from a high-tensile aluminium alloy — the same category of material used throughout the firm's competition-focused catalogue — then CNC-milled it to tolerances that guarantee a bolt-on fit without shimming or adjustment.\u003c\/p\u003e\u003cp\u003eThe black anodising does more than look purposeful: it creates a hard-oxide surface layer that protects against the abrasion of tarmac contact as well as the chemical exposure inevitable in a racing environment. The cover sits low-profile against the engine, adding meaningful impact resistance without the bulk or weight penalty of aftermarket crash protection systems that can compromise cornering clearance.\u003c\/p\u003e\u003ch2\u003eMade in Italy — Built for Racing\u003c\/h2\u003e\u003cp\u003eSpider Racing has built its reputation supplying the Italian racing scene with parts that meet the demands of professional and club-level competition alike. The 20.D164 cover is manufactured entirely in Italy, with quality control reflecting that competition pedigree. For Panigale V4\/S owners who use their bikes seriously — track days, sprint championships, endurance events — it represents an investment many times smaller than a single engine case repair.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale V4 — 2018, 2019, 2020, 2021, 2022, 2023, 2024\u003c\/li\u003e\n\u003cli\u003eDucati Panigale V4 S — 2018, 2019, 2020, 2021, 2022, 2023, 2024\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Spider Racing\u003c\/li\u003e\n\u003cli\u003ePart number: 20.D164\u003c\/li\u003e\n\u003cli\u003eMaterial: High-strength aluminium alloy\u003c\/li\u003e\n\u003cli\u003eManufacture: CNC-machined\u003c\/li\u003e\n\u003cli\u003eFinish: Black anodised\u003c\/li\u003e\n\u003cli\u003eCountry of manufacture: Italy\u003c\/li\u003e\n\u003cli\u003eFitment: Ducati Panigale V4 \/ V4 S (2018–2024)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Spider Racing","offers":[{"title":"Kit (20.D164)","offer_id":53167218983178,"sku":"20.D164","price":321.17,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/SpiderV4Deckel.png?v=1780793347"},{"product_id":"aluminium-schutzdeckel-spider-honda-sc82","title":"Spider Racing Aluminium Engine Case Covers Honda CBR 1000 RR-R SC82 (2020-2026) 20.H213","description":"\u003cp\u003eMachined from high-strength aluminium alloy and finished in a deep black anodised coat, these Spider Racing engine case covers bring Italian craftsmanship to the Honda CBR 1000 RR-R SC82. Where factory plastic covers offer minimal protection, this CNC-milled kit is engineered to absorb and deflect crash energy — keeping your engine casings intact when it matters most.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCNC-machined from solid high-strength aluminium alloy for exceptional rigidity and long-term durability\u003c\/li\u003e\n\u003cli\u003eBlack anodised finish provides a refined, factory-clean aesthetic while adding a hard, corrosion-resistant surface layer\u003c\/li\u003e\n\u003cli\u003eLightweight construction adds meaningful protection with negligible impact on overall motorcycle weight\u003c\/li\u003e\n\u003cli\u003ePrecise fitment engineered specifically for the Honda CBR 1000 RR-R SC82 — no modification required\u003c\/li\u003e\n\u003cli\u003e100% manufactured in Italy by Spider Racing, a specialist in CNC engine protection components\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCraftsmanship and Finish\u003c\/h2\u003e\u003cp\u003eSpider Racing's heritage is rooted in precision Italian manufacturing, and the 20.H213 kit reflects that pedigree. Each cover is turned from a solid billet of aluminium alloy — not cast — ensuring consistent wall thickness and no hidden porosity. The black hard anodising process penetrates the aluminium surface rather than sitting on top of it, meaning the finish resists scratches, corrosion and the ingress of road grime far better than a simple paint or powder coat. The result is a set of covers that look as purposeful as they perform.\u003c\/p\u003e\u003ch2\u003eProtection Where It Counts\u003c\/h2\u003e\u003cp\u003eA lowside on track or road can destroy an engine casing in an instant, turning a minor incident into a costly repair. The SC82-generation CBR 1000 RR-R runs compact, exposed casings that are particularly vulnerable. The Spider Racing covers wrap tightly around the critical engine housing areas, spreading impact loads across a broader aluminium surface and reducing the chance of a cracked or holed casing. Because the covers are machined from high-strength alloy rather than pressed steel or moulded plastic, they maintain their structural integrity through repeated minor contacts — ideal for track day riders who expect the occasional tip-over.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThe 20.H213 cover set is designed exclusively for the Honda CBR 1000 RR-R in SC82 chassis specification. All model year variants from 2020 through to 2026 are supported. No drilling, tapping or bracket fabrication is required — the covers bolt directly to the factory mounting points using the existing hardware pattern.\u003c\/p\u003e\u003cul\u003e\u003cli\u003eHonda CBR 1000 RR-R SC82 (2020, 2021, 2022, 2023, 2024, 2025, 2026)\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eSpider Racing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003e20.H213\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eHigh-strength aluminium alloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack anodised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturing\u003c\/td\u003e\n\u003ctd\u003eCNC-machined from solid billet, 100% Made in Italy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eHonda CBR 1000 RR-R SC82 (2020-2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntended use\u003c\/td\u003e\n\u003ctd\u003eEngine case crash protection — road and track\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Spider Racing","offers":[{"title":"Kit (20.H213)","offer_id":53167219015946,"sku":"20.H213","price":348.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/NEWSC82_393353fe-9420-4a46-913f-66d01742dbd6.png?v=1780793347"},{"product_id":"aluminium-schutzdeckel-spider-racing-yamaha-r3","title":"Spider Racing Aluminium Engine Cover Guard – Yamaha YZF-R3 (2015–2026) 20.Y140","description":"\u003cp\u003eProtect your Yamaha YZF-R3's engine casing without compromise. Spider Racing's CNC-machined aluminium engine cover guard is engineered to absorb and deflect impact energy during a slide, keeping costly casings intact while adding negligible mass to the motorcycle — the kind of quietly reassuring protection that lets you ride with total confidence, day after day.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHigh-strength aluminium alloy construction shields the engine casing effectively in a crash, yet adds no meaningful weight to the YZF-R3.\u003c\/li\u003e\n\u003cli\u003eCNC-machined from solid billet using precision tooling for exact fitment and consistent wall thickness throughout.\u003c\/li\u003e\n\u003cli\u003eBlack anodised finish hardens the surface against abrasion and corrosion while giving the guard a sleek, purposeful appearance that suits the R3's styling.\u003c\/li\u003e\n\u003cli\u003eDrop-in replacement fitment — designed specifically for the Yamaha YZF-R3 across the full 2015–2026 production run, with no modifications required.\u003c\/li\u003e\n\u003cli\u003e100% Made in Italy by Spider Racing, a manufacturer synonymous with precision-engineered motorcycle protection components.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuilt to Last, Sized to Fit\u003c\/h2\u003e\u003cp\u003eThe guard is machined from a single billet of high-tensile aluminium alloy, so there are no weak seams or cast inclusions that could cause a failure at the worst possible moment. The black anodising treatment penetrates the surface of the metal rather than sitting on top of it, which means it will not chip or peel under the sustained heat and vibration of everyday road use. Mounting points are machined to match the original bolt pattern of the YZF-R3 exactly, making installation a straightforward job with standard tools.\u003c\/p\u003e\u003ch2\u003eTrack Days and Daily Riding\u003c\/h2\u003e\u003cp\u003eWhether the R3 is used for commuting, canyon runs, or occasional track days, the Spider Racing engine cover guard earns its place. A single low-side at a track day can write off an unprotected engine casing; fitting this guard is a fraction of that repair bill. On the road, the anodised aluminium resists fuel spills, chain lubricant, and road grime without surface degradation, so the guard continues to do its job without looking neglected.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis engine cover guard is designed exclusively for the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eYamaha YZF-R3 (2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026)\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eSpider Racing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003e20.Y140\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eCNC-machined high-strength aluminium alloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSurface Finish\u003c\/th\u003e\n\u003ctd\u003eBlack anodised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturing\u003c\/th\u003e\n\u003ctd\u003e100% Made in Italy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment\u003c\/th\u003e\n\u003ctd\u003eYamaha YZF-R3 (2015–2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003ctd\u003eEngine casing protection in the event of a crash\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Spider Racing","offers":[{"title":"Kit (20.Y140)","offer_id":53167219179786,"sku":"20.Y140","price":266.74,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/R3COVERS.png?v=1780793351"},{"product_id":"aluminium-schutzdeckel-spider-racing-yamaha-r6","title":"Spider Racing Aluminium Engine Case Cover Yamaha YZF-R6 RJ11, RJ15 \u0026 RJ27 (2006-2026) – 20.Y151","description":"\u003cp\u003ePrecision-crafted in Italy from high-strength CNC-milled aluminium and finished in a sleek black anodised coat, the Spider Racing engine case cover is the definitive protective upgrade for the Yamaha YZF-R6. Spanning every RJ11, RJ15 and RJ27 built between 2006 and 2026, this cover marries race-proven Italian engineering with the clean, purposeful aesthetic that defines the R6's character.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCNC-milled from high-strength aluminium alloy — exceptional rigidity without adding meaningful mass to the motorcycle\u003c\/li\u003e\n\u003cli\u003eBlack anodised finish that resists corrosion and wear while complementing the R6's aggressive styling\u003c\/li\u003e\n\u003cli\u003eDesigned specifically to shield the engine casing from impact damage in the event of a crash or slide\u003c\/li\u003e\n\u003cli\u003e100% Made in Italy by Spider Racing — a brand with deep roots in track-oriented add-on parts\u003c\/li\u003e\n\u003cli\u003eDirect OEM-style fitment across all RJ11, RJ15 and RJ27 variants — no modification required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eItalian Craft, Race-Bred Purpose\u003c\/h2\u003e\u003cp\u003eSpider Racing has built its reputation on components that perform under the harshest conditions — and this engine case cover is no exception. The billet aluminium construction is machined to tight tolerances, ensuring the cover sits flush against the casing and provides genuine structural protection rather than a merely cosmetic layer. The black anodised surface treatment adds depth and longevity to the finish, resisting the oil, grime and heat cycles that would quickly degrade lesser coatings. Whether your R6 lives on track days or carves mountain roads, this cover communicates a standard of preparation that matches the machine itself.\u003c\/p\u003e\u003ch2\u003eLightweight Protection Without Compromise\u003c\/h2\u003e\u003cp\u003eOne of the most considered aspects of Spider Racing's design philosophy is weight discipline. The aluminium construction keeps added mass negligible, so the R6's handling balance remains entirely intact. At speed or on the brakes, you will notice nothing different — until the moment protection is actually needed, at which point the cover absorbs and deflects impact forces that would otherwise crack open a stock plastic or alloy casing and end your ride immediately.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis engine case cover is engineered exclusively for the following Yamaha YZF-R6 variants:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eYamaha YZF-R6 RJ11 (2006-2007)\u003c\/li\u003e\n\u003cli\u003eYamaha YZF-R6 RJ15 (2008-2009)\u003c\/li\u003e\n\u003cli\u003eYamaha YZF-R6 RJ27 (2010-2016 and continued through 2026 facelift variants)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCoverage: model years 2006 to 2026. Always verify your frame code before ordering if your motorcycle has been modified or is a non-standard variant.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart number: 20.Y151\u003c\/li\u003e\n\u003cli\u003eBrand: Spider Racing\u003c\/li\u003e\n\u003cli\u003eMaterial: CNC-milled aluminium alloy, black anodised\u003c\/li\u003e\n\u003cli\u003eFinish: Black anodised\u003c\/li\u003e\n\u003cli\u003eFitment: Yamaha YZF-R6 RJ11, RJ15, RJ27 (2006-2026)\u003c\/li\u003e\n\u003cli\u003eOrigin: Made in Italy\u003c\/li\u003e\n\u003cli\u003eFunction: Engine case protection in the event of a crash\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Spider Racing","offers":[{"title":"Kit (20.Y151)","offer_id":53167219212554,"sku":"20.Y151","price":306.36,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/R6CoversNew.png?v=1780793354"},{"product_id":"aluminium-schutzdeckel-spider-yamaha-r1","title":"Spider Racing Aluminium Engine Cover Guard Yamaha YZF-R1\/M RN32, RN49 \u0026 RN65 (2015-2026) 20.Y33","description":"\u003cp\u003eCrafted in Italy and finished in a deep black anodised coat, the Spider Racing engine cover guard brings genuine motorsport heritage to your Yamaha YZF-R1\/M. Machined from a high-strength aluminium alloy with the same CNC precision Spider Racing applies to its race-proven components, this guard marries purposeful aesthetics with the structural integrity needed to protect your engine casing when it matters most — on the road or at the track.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCNC-milled from high-strength aluminium alloy for maximum precision and resistance without adding meaningful weight to the chassis.\u003c\/li\u003e\n\u003cli\u003eBlack anodised finish: corrosion-resistant, hard-wearing, and visually sharp — a finish that elevates the engine bay rather than merely covering it.\u003c\/li\u003e\n\u003cli\u003eDesigned specifically to absorb and deflect impact energy in a fall, shielding the engine casing from costly damage.\u003c\/li\u003e\n\u003cli\u003e100% manufactured in Italy by Spider Racing — the mark of a brand with deep roots in Italian motorsport craftsmanship.\u003c\/li\u003e\n\u003cli\u003eDirect, bolt-on fitment for Yamaha YZF-R1 and YZF-R1M models RN32, RN49 and RN65 (2015-2026) — no modification required.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign, Finish and Heritage\u003c\/h2\u003e\u003cp\u003eSpider Racing has spent decades supplying the Italian racing paddock, and that pedigree shows in every detail of this engine cover guard. The component is milled from solid aluminium — not cast, not stamped — using multi-axis CNC machining that holds tolerances tight enough to ensure a flush, factory-quality fit. The black anodising process then penetrates the surface layer of the alloy rather than sitting on top of it, delivering a finish that resists chips, scratches and the constant thermal cycling that engine-bay components must endure. The result is a guard that looks like it belongs on the bike, not an afterthought bolted on as an emergency measure.\u003c\/p\u003e\u003ch2\u003eProtection on Road and Track\u003c\/h2\u003e\u003cp\u003eThe YZF-R1 and R1M engine casing is an expensive and structurally important component. A low-speed slide or a track-day tip-over without proper protection can puncture or crack the casing, turning a minor incident into a costly rebuild. The Spider Racing guard intercepts that impact, spreading the load across its machined aluminium face and keeping the underlying casting intact. Because it is machined rather than cast, the part maintains a wall thickness that absorbs energy efficiently while adding only negligible mass — keeping the R1 feeling every bit as sharp as it should.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis engine cover guard is engineered exclusively for the following Yamaha models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eYamaha YZF-R1 RN32 (2015-2016)\u003c\/li\u003e\n\u003cli\u003eYamaha YZF-R1M RN32 (2015-2016)\u003c\/li\u003e\n\u003cli\u003eYamaha YZF-R1 RN49 (2017-2019)\u003c\/li\u003e\n\u003cli\u003eYamaha YZF-R1M RN49 (2017-2019)\u003c\/li\u003e\n\u003cli\u003eYamaha YZF-R1 RN65 (2020-2026)\u003c\/li\u003e\n\u003cli\u003eYamaha YZF-R1M RN65 (2020-2026)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Spider Racing\u003c\/li\u003e\n\u003cli\u003ePart number: 20.Y33\u003c\/li\u003e\n\u003cli\u003eMaterial: CNC-milled high-strength aluminium alloy\u003c\/li\u003e\n\u003cli\u003eFinish: Black anodised\u003c\/li\u003e\n\u003cli\u003eManufacture: Made in Italy\u003c\/li\u003e\n\u003cli\u003eFunction: Engine casing protection in the event of a fall\u003c\/li\u003e\n\u003cli\u003eFitment: Yamaha YZF-R1\/M RN32, RN49 and RN65 (2015-2026)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Spider Racing","offers":[{"title":"Kit (20.Y33)","offer_id":53167219245322,"sku":"20.Y33","price":350.52,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/DECKELR1.png?v=1780793354"},{"product_id":"aluminium-lima-motordeckel-motocorse-ducati-panigale-v4","title":"Motocorse Left Aluminium Engine Cover with Titanium Bolts – Ducati Panigale V4\/S\/R (2018–2024)","description":"\u003cp\u003eMotocorse's left engine cover — the alternator-side housing — is precision CNC-machined from Anticorodal aluminium and anodised to aerospace-grade standards, giving your Ducati Panigale V4 a component that meets the exacting structural and safety demands of both road and circuit use. Supplied complete with 12 solid-machined titanium bolts, this is a drop-in OEM replacement engineered with full GP-paddock pedigree.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCNC-machined from Anticorodal aluminium billet for exceptional strength-to-weight ratio and structural integrity\u003c\/li\u003e\n\u003cli\u003eAnodised surface treatment delivers lasting corrosion resistance alongside a clean, premium finish\u003c\/li\u003e\n\u003cli\u003e12 solid-machined titanium bolts included — every fastener in the kit is purpose-built for this application\u003c\/li\u003e\n\u003cli\u003eTrue plug-and-play fitment: replaces the original left engine housing (alternator cover) with zero modification to the motorcycle\u003c\/li\u003e\n\u003cli\u003eAvailable in four anodised finishes — silver (102110050S), black (102110050B), red (102110050R), and gold (102110050G) — to complement your Panigale's livery\u003c\/li\u003e\n\u003cli\u003eDistinctive GP-inspired aesthetic that sets the engine bay apart from stock\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Engineering\u003c\/h2\u003e\u003cp\u003eMotocorse designs this cover from Anticorodal, a high-strength aluminium alloy recognised for its excellent machinability and outstanding resistance to corrosion — a material choice that reflects the company's uncompromising motorsport origins. Every cover passes through multi-axis CNC machining to achieve tolerances that guarantee a precise, rattle-free fit against the engine casing. The anodised surface is not merely cosmetic: the hard-anodised layer adds a protective barrier that resists abrasion, heat discolouration, and the inevitable exposure to engine oils and cleaning fluids that come with regular track use.\u003c\/p\u003e\u003cp\u003eThe included titanium bolts are machined from solid titanium billet rather than formed or cast, which maintains grain structure throughout the fastener for superior fatigue resistance. This matters on a high-revving four-cylinder engine where vibration loading on ancillary covers is far greater than on a typical road machine.\u003c\/p\u003e\u003ch2\u003eInstallation and Application\u003c\/h2\u003e\u003cp\u003eThis cover is a direct one-for-one replacement for the original Ducati left engine housing on the alternator side. No alterations to the fairing, wiring, or any other component are required. The mounting footprint, gasket interface, and hardware pattern are identical to OEM, so installation is straightforward and can be carried out with basic workshop tools. The result is a factory-correct fit with the visual and material character of a fully prepared race machine.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale V4 (2018–2024)\u003c\/li\u003e\n\u003cli\u003eDucati Panigale V4 S (2018–2024)\u003c\/li\u003e\n\u003cli\u003eDucati Panigale V4 R (2019–2024, including Euro 5 models)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMotocorse\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eComponent\u003c\/td\u003e\n\u003ctd\u003eLeft engine cover (alternator cover)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eAnticorodal aluminium (CNC-machined)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurface finish\u003c\/td\u003e\n\u003ctd\u003eAnodised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncluded fasteners\u003c\/td\u003e\n\u003ctd\u003e12 solid-machined titanium bolts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailable part numbers\u003c\/td\u003e\n\u003ctd\u003eSilver: 102110050S \/ Black: 102110050B \/ Red: 102110050R \/ Gold: 102110050G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eDucati Panigale V4, V4 S, V4 R (2018–2024)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003ePlug-and-play, no modification required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Motocorse","offers":[{"title":"Silver","offer_id":53167435153674,"sku":"102110050S","price":1425.62,"currency_code":"EUR","in_stock":true},{"title":"Black","offer_id":53167435186442,"sku":"102110050B","price":1425.62,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":53167435219210,"sku":"102110050R","price":1425.62,"currency_code":"EUR","in_stock":true},{"title":"Gold","offer_id":53167435251978,"sku":"102110050G","price":1425.62,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/Aluminum_alternator_crankcase_with_titanium_screws_-_Panigale_V4.png?v=1780797796"},{"product_id":"aluminium-brake-lever-guard-evo-bremshebelschutz-bonamici-racing-lprr2","title":"Bonamici Racing Aluminium Brake Lever Guard EVO for Honda CBR 1000 RR (2008–2016) – LPRR2","description":"\u003cp\u003eMachined from solid aluminium billet in Italy and finished to exacting racing standards, the Bonamici Racing Brake Lever Guard EVO (LPRR2) is the kind of component that tells you everything about how it was made the moment you pick it up. Designed specifically for the Honda CBR 1000 RR across model years 2008 to 2016, it delivers genuine protection against inadvertent brake lever contact — from a rival's handlebar on the track or a low-speed knock in the paddock — without a single gram of unnecessary material.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCNC-machined from high-grade aluminium billet for outstanding rigidity and minimal weight — a true racing-spec construction\u003c\/li\u003e\n\u003cli\u003eAerodynamically shaped profile reduces turbulence at the handlebar, contributing to cleaner airflow and a more composed cockpit\u003c\/li\u003e\n\u003cli\u003ePrevents unintended lever actuation on contact, a critical safety benefit whether you're on circuit or navigating traffic\u003c\/li\u003e\n\u003cli\u003eIncludes the dedicated ADLH19_U adapter, engineered to mate precisely with the OEM handlebar of the CBR 1000 RR (2008–2016) — no modifications required\u003c\/li\u003e\n\u003cli\u003e100% Made in Italy, reflecting Bonamici Racing's commitment to motorsport-grade manufacturing quality\u003c\/li\u003e\n\u003cli\u003eAvailable in a full range of anodised colours to complement or contrast your CBR's livery\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Materials\u003c\/h2\u003e\u003cp\u003eEvery detail of the LPRR2 reflects Bonamici Racing's Italian workshop heritage. The guard is CNC-machined from solid aluminium stock, producing a component with tight tolerances, a clean finish and the structural integrity to absorb real-world impacts without deforming. The anodised surface treatment protects against corrosion and keeps the colour looking fresh through regular cleaning and exposure to the elements. This is not a cast or pressed part — the CNC process removes material where it is not needed, resulting in a guard that is both lighter and stronger than cheaper alternatives.\u003c\/p\u003e\u003ch2\u003ePerformance and Aerodynamics\u003c\/h2\u003e\u003cp\u003eThe EVO designation reflects the guard's evolved aerodynamic profile. The sculpted form is not merely aesthetic: by smoothing airflow around the lever assembly, it reduces the small but measurable turbulence that blunt handlebar-end components can generate at speed. For CBR riders who pay close attention to every aspect of their machine's behaviour, this attention to aerodynamic detail is a genuine benefit rather than a marketing point. On the track, where inadvertent lever contact between riders is a documented hazard, the guard provides a solid physical barrier that can prevent the kind of sudden braking event that ends races — or worse.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThe Bonamici Racing LPRR2 is developed and tested for the Honda CBR 1000 RR across the following model years:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eHonda CBR 1000 RR — 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThe included ADLH19_U adapter is purpose-made for the standard OEM handlebar fitted to these models. Installation is direct and straightforward — no cutting, drilling or handlebar replacement is required. The guard is positioned on the right-hand side, covering the brake lever.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBonamici Racing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eLPRR2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdapter\u003c\/td\u003e\n\u003ctd\u003eADLH19_U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eCNC-machined aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePosition\u003c\/td\u003e\n\u003ctd\u003eRight (brake lever guard)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eHonda CBR 1000 RR (2008–2016)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHandlebar compatibility\u003c\/td\u003e\n\u003ctd\u003eOEM stock handlebar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of manufacture\u003c\/td\u003e\n\u003ctd\u003eItaly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Bonamici Racing","offers":[{"title":"Black \/ ADLH19_U","offer_id":53167971696906,"sku":"LPRR2_BK + ADLH19_U","price":246.33,"currency_code":"EUR","in_stock":true},{"title":"Blue \/ ADLH19_U","offer_id":53167971729674,"sku":"LPRR2_BL + ADLH19_U","price":246.33,"currency_code":"EUR","in_stock":true},{"title":"Bronze \/ ADLH19_U","offer_id":53167971762442,"sku":"LPRR2_BR + ADLH19_U","price":246.33,"currency_code":"EUR","in_stock":true},{"title":"Gold \/ ADLH19_U","offer_id":53167971795210,"sku":"LPRR2_GO + ADLH19_U","price":246.33,"currency_code":"EUR","in_stock":true},{"title":"Green \/ ADLH19_U","offer_id":53167971827978,"sku":"LPRR2_GR + ADLH19_U","price":246.33,"currency_code":"EUR","in_stock":true},{"title":"Orange \/ ADLH19_U","offer_id":53167971860746,"sku":"LPRR2_OR + ADLH19_U","price":246.33,"currency_code":"EUR","in_stock":true},{"title":"Red \/ ADLH19_U","offer_id":53167971893514,"sku":"LPRR2_RE + ADLH19_U","price":246.33,"currency_code":"EUR","in_stock":true},{"title":"Silver \/ ADLH19_U","offer_id":53167971926282,"sku":"LPRR2_RE + ADLH19_U","price":246.33,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/SHOPBRAKEBLACK_805b8ee0-0ab9-4824-bebb-a1774d17a0f8.png?v=1780803278"},{"product_id":"aluminium-brake-lever-guard-evo-bremshebelschutz-fur-oe-yamaha-yzf-r6-bonamici-racing-lprr2","title":"Bonamici Racing Brake Lever Guard EVO – Aluminium Brake Lever Protector for Yamaha YZF-R6 (2006–2026) LPRR2","description":"\u003cp\u003eMachined from solid CNC-milled aluminium and finished to racing-grade tolerances, the Bonamici Racing Brake Lever Guard EVO (LPRR2) brings Italian craftsmanship directly to the cockpit of your Yamaha YZF-R6. Designed to prevent inadvertent brake lever contact during overtaking manoeuvres or tight racing situations, it delivers genuine protection without compromising the clean, purposeful aesthetic the R6 deserves.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCNC-milled aluminium construction — exceptional strength-to-weight ratio with a precision finish that sets it apart from pressed or cast alternatives\u003c\/li\u003e\n\u003cli\u003eAerodynamically optimised EVO profile improves airflow management around the lever area while adding a defined racing appearance\u003c\/li\u003e\n\u003cli\u003eReliable brake lever protection prevents accidental lever actuation in close-quarters road or circuit riding\u003c\/li\u003e\n\u003cli\u003eIncludes ADLY_U adapter, engineered specifically for the OEM handlebar of the Yamaha YZF-R6 — no modification required\u003c\/li\u003e\n\u003cli\u003eAvailable in a wide range of anodised colours to coordinate with your R6's livery\u003c\/li\u003e\n\u003cli\u003e100% Made in Italy — developed for motorsport and approved for road use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Materials\u003c\/h2\u003e\u003cp\u003eThe LPRR2 is the product of Bonamici Racing's long-standing commitment to precision Italian manufacturing. Each guard is CNC-milled from a solid aluminium billet, producing a component that is both ultralight and exceptionally resistant to the stresses of track and road riding. The anodised finish is applied across the full colour range, protecting the surface against corrosion and everyday wear while maintaining a premium appearance lap after lap.\u003c\/p\u003e\u003cp\u003eThe aerodynamically considered EVO profile is not merely cosmetic — it channels air efficiently around the lever assembly, contributing to overall cockpit stability at speed. Every detail, from the machined edges to the precisely positioned mounting points, reflects the exacting standards that have made Bonamici Racing a trusted name in Italian racing accessory manufacture.\u003c\/p\u003e\u003ch2\u003eInstallation and Plug-and-Play Fitment\u003c\/h2\u003e\u003cp\u003eInstallation is straightforward and requires no permanent modification to your YZF-R6. The included ADLY_U adapter is matched precisely to the OEM handlebar dimensions of the R6, ensuring a secure, rattle-free fit from the first ride. Mounting the guard to the right-hand (brake lever) side of the bar takes only minutes with standard workshop tools, making it an ideal upgrade whether you are preparing for a track day or simply refining your road setup.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis lever guard is compatible with the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eYamaha YZF-R6 — model years 2006 to 2026\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eAdapter included: ADLY_U (designed for the OEM handlebar). No handlebar modification is necessary for a direct-fit installation.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBonamici Racing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eLPRR2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eCNC-milled aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePosition\u003c\/td\u003e\n\u003ctd\u003eRight-hand side (brake lever)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdapter included\u003c\/td\u003e\n\u003ctd\u003eADLY_U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eYamaha YZF-R6 (2006–2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eMade in Italy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Bonamici Racing","offers":[{"title":"Black \/ ADLY_U","offer_id":53167976415498,"sku":"LPRR2_BK + ADLY_U","price":246.33,"currency_code":"EUR","in_stock":true},{"title":"Blue \/ ADLY_U","offer_id":53167976448266,"sku":"LPRR2_BL + ADLY_U","price":246.33,"currency_code":"EUR","in_stock":true},{"title":"Bronze \/ ADLY_U","offer_id":53167976481034,"sku":"LPRR2_BR + ADLY_U","price":246.33,"currency_code":"EUR","in_stock":true},{"title":"Gold \/ ADLY_U","offer_id":53167976513802,"sku":"LPRR2_GO + ADLY_U","price":246.33,"currency_code":"EUR","in_stock":true},{"title":"Green \/ ADLY_U","offer_id":53167976546570,"sku":"LPRR2_GR + ADLY_U","price":246.33,"currency_code":"EUR","in_stock":true},{"title":"Orange \/ ADLY_U","offer_id":53167976579338,"sku":"LPRR2_OR + ADLY_U","price":246.33,"currency_code":"EUR","in_stock":true},{"title":"Red \/ ADLY_U","offer_id":53167976612106,"sku":"LPRR2_RE + ADLY_U","price":246.33,"currency_code":"EUR","in_stock":true},{"title":"Silver \/ ADLY_U","offer_id":53167976644874,"sku":"LPRR2_RE + ADLY_U","price":246.33,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/SHOPBRAKEBLACK_7167f5f4-a365-480c-a54d-7b944acb2748.png?v=1780803308"},{"product_id":"aluminium-brake-lever-guard-bremshebelschutz-fur-oe-lenker-bmw-k66","title":"Bonamici Racing Aluminium Brake Lever Guard for BMW M1000RR K66 (2021-2026) – LPRR_B with Adapter ADLRR","description":"\u003cp\u003eProtecting your brake lever from accidental contact is not a luxury on the M1000RR — it is a safety imperative. The Bonamici Racing LPRR_B brake lever guard, paired with the dedicated ADLRR adapter for the OEM handlebar of the BMW M1000RR K66 (2021–2026), delivers certified Italian race-engineering precision to every trackday and spirited road ride.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEngineered specifically for the OEM handlebar of the BMW M1000RR K66, eliminating any risk of accidental lever activation in close-quarters racing or group riding situations.\u003c\/li\u003e\n\u003cli\u003eAerodynamically profiled aluminium body channels airflow efficiently, contributing to handlebar stability at top speed rather than acting as a blunt obstruction.\u003c\/li\u003e\n\u003cli\u003eCNC-machined from high-strength aluminium billet for a combination of minimal mass and maximum rigidity — no flex, no fatigue.\u003c\/li\u003e\n\u003cli\u003ePlug-and-play fitment via the ADLRR adapter: no modifications to the OEM handlebar are required, keeping the installation reversible and clean.\u003c\/li\u003e\n\u003cli\u003eAvailable in eight anodised colour finishes to complement or contrast the M1000RR's racing livery.\u003c\/li\u003e\n\u003cli\u003e100% Made in Italy — produced in the same facility that supplies components to world championship race teams.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSafety Where It Matters Most\u003c\/h2\u003e\u003cp\u003eAn unintended touch on the brake lever — whether from a rival's fairing in a race situation, wind pressure at maximum speed, or a frantic overtake on a mountain road — can have serious consequences on a machine as potent as the M1000RR. The LPRR_B acts as a physical barrier on the right-hand side of the handlebar, intercepting contact before it reaches the lever. That single function can be the margin between a controlled corner exit and an unwanted moment. Bonamici Racing designed this guard with that reality in mind, which is why it has been adopted across the WorldSBK paddock as standard practice.\u003c\/p\u003e\u003ch2\u003eConstruction and Finish\u003c\/h2\u003e\u003cp\u003eThe guard is machined from a single billet of high-strength aluminium using multi-axis CNC milling, giving it dimensional accuracy that cast or pressed alternatives simply cannot match. The aerodynamic profile is not decorative: it is a functional shape developed through race use to minimise drag and prevent the guard from becoming a lever for wind pressure at speed. Each guard is then hard anodised in your chosen colour, producing a surface that resists track debris, UV exposure and the kind of contact it is designed to intercept. The matte black version integrates cleanly with the M1000RR's carbon and aluminium aesthetic; the gold, bronze, red, orange, green and blue options allow personalisation without compromising the component's function.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis listing is for the Bonamici Racing LPRR_B brake lever guard supplied with the ADLRR adapter, which is engineered exclusively for the standard OEM handlebar fitted to the BMW M1000RR K66 across model years 2021 through 2026. No drilling, tapping or handlebar modification is required. If you are running aftermarket clip-ons or a different handlebar standard, please verify adapter compatibility before ordering.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBMW M1000RR K66 — model years 2021, 2022, 2023, 2024, 2025, 2026\u003c\/li\u003e\n\u003cli\u003eMounting side: right (brake lever)\u003c\/li\u003e\n\u003cli\u003eAdapter required: ADLRR (included)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBonamici Racing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eLPRR_B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdapter\u003c\/td\u003e\n\u003ctd\u003eADLRR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eCNC-machined high-strength aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting side\u003c\/td\u003e\n\u003ctd\u003eRight (brake lever)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eBMW M1000RR K66 (2021–2026), OEM handlebar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003ePlug and play — no modifications required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eMade in Italy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Bonamici Racing","offers":[{"title":"ADLRR \/ Black","offer_id":53167986835722,"sku":"LPRR_B_BK + ADLRR","price":152.08,"currency_code":"EUR","in_stock":true},{"title":"ADLRR \/ Silver","offer_id":53167986868490,"sku":"LPRR_B_SI + ADLRR","price":152.08,"currency_code":"EUR","in_stock":true},{"title":"ADLRR \/ Gold","offer_id":53167986901258,"sku":"LPRR_B_GO + ADLRR","price":152.08,"currency_code":"EUR","in_stock":true},{"title":"ADLRR \/ Orange","offer_id":53167986934026,"sku":"LPRR_B_OR + ADLRR","price":152.08,"currency_code":"EUR","in_stock":true},{"title":"ADLRR \/ Green","offer_id":53167986966794,"sku":"LPRR_B_GR + ADLRR","price":152.08,"currency_code":"EUR","in_stock":true},{"title":"ADLRR \/ Blue","offer_id":53167986999562,"sku":"LPRR_B_BL + ADLRR","price":152.08,"currency_code":"EUR","in_stock":true},{"title":"ADLRR \/ Red","offer_id":53167987032330,"sku":"LPRR_B_RE + ADLRR","price":152.08,"currency_code":"EUR","in_stock":true},{"title":"ADLRR \/ Bronze","offer_id":53167987065098,"sku":"LPRR_B_BR + ADLRR","price":152.08,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/guardbrakeblack_3cc9fa78-2cb7-42bb-b659-88fea32abc96.png?v=1780803413"},{"product_id":"aluminium-brake-lever-guard-bremshebelschutz-fur-oe-lenker-honda-cbr-1000-rr-r-sc82-20-25-bonamici-racing-lprr_b","title":"Bonamici Racing Aluminium Brake Lever Guard for Honda CBR 1000 RR-R SC82 (2020–2026) – LPRR_B","description":"\u003cp\u003eFew components on a high-performance machine carry the design pedigree and purposeful elegance of a Bonamici Racing brake lever guard. The LPRR_B is CNC-machined in Italy from aerospace-grade aluminium, finished in a choice of anodised colours that complement the CBR 1000 RR-R Fireblade's aggressive bodywork — and every detail, from its aerodynamic profile to its precision adapter fitment, reflects the brand's decades of racing heritage.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAerodynamically shaped guard prevents accidental brake engagement during close-quarters riding, overtaking manoeuvres and track incidents\u003c\/li\u003e\n\u003cli\u003ePlug-and-play compatibility with the OEM handlebar of the Honda CBR 1000 RR-R SC82 — no modifications required\u003c\/li\u003e\n\u003cli\u003ePairs with dedicated adapter ADLH19, engineered to the exact geometry of the SC82 stock bar\u003c\/li\u003e\n\u003cli\u003eCNC-machined aluminium construction delivers an outstanding strength-to-weight ratio with a refined, competition-inspired finish\u003c\/li\u003e\n\u003cli\u003eAvailable in eight anodised colour options to match or contrast the Fireblade's livery\u003c\/li\u003e\n\u003cli\u003e100% Made in Italy — manufactured to the exacting quality standards Bonamici Racing applies to its full MotoGP-derived catalogue\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign, Finish and Racing Heritage\u003c\/h2\u003e\u003cp\u003eBonamici Racing began supplying Italian racing teams long before brake lever guards became a trackday staple, and that lineage is visible in the LPRR_B's clean, flowing form. The aerodynamic profile is not merely decorative — it channels airflow efficiently past the lever cluster, contributing to handlebar stability at the elevated speeds the CBR 1000 RR-R SC82 is built for. The anodised finish is applied after machining, so the colour penetrates the aluminium surface rather than sitting on top of it, resisting fade and chipping through seasons of demanding use.\u003c\/p\u003e\u003ch2\u003ePerformance and Protection\u003c\/h2\u003e\u003cp\u003eOn track or on a spirited road ride, the lever guard creates a physical barrier between the brake lever and external contact — whether that is a rival's elbow in a close corner, a stray hand during a fall, or accidental pressure from gear or luggage in traffic. By eliminating unintended braking inputs, the LPRR_B makes high-speed riding measurably safer without adding complexity to the cockpit. Installation is straightforward: the ADLH19 adapter locates precisely on the SC82's OEM handlebar right-hand end, and the guard locks into position without drilling, cutting or rerouting any existing component.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis brake lever guard is designed and validated for the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eHonda CBR 1000 RR-R Fireblade SC82 — model years 2020, 2021, 2022, 2023, 2024, 2025 and 2026\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eRequired adapter: ADLH19 (fits the OEM handlebar of the SC82). Installation side: right (brake lever). No handlebar modification is required when using the OEM bar.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBonamici Racing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eLPRR_B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRequired adapter\u003c\/td\u003e\n\u003ctd\u003eADLH19\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eCNC-machined aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation side\u003c\/td\u003e\n\u003ctd\u003eRight (brake lever)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eHonda CBR 1000 RR-R SC82 (2020–2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting type\u003c\/td\u003e\n\u003ctd\u003ePlug and play — no modification required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of manufacture\u003c\/td\u003e\n\u003ctd\u003eItaly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Bonamici Racing","offers":[{"title":"ADLH19 \/ Black","offer_id":53167989326090,"sku":"LPRR_B_BK + ADLH19","price":152.08,"currency_code":"EUR","in_stock":true},{"title":"ADLH19 \/ Silver","offer_id":53167989358858,"sku":"LPRR_B_SI + ADLH19","price":152.08,"currency_code":"EUR","in_stock":true},{"title":"ADLH19 \/ Gold","offer_id":53167989391626,"sku":"LPRR_B_GO + ADLH19","price":152.08,"currency_code":"EUR","in_stock":true},{"title":"ADLH19 \/ Orange","offer_id":53167989424394,"sku":"LPRR_B_OR + ADLH19","price":152.08,"currency_code":"EUR","in_stock":true},{"title":"ADLH19 \/ Green","offer_id":53167989457162,"sku":"LPRR_B_GR + ADLH19","price":152.08,"currency_code":"EUR","in_stock":true},{"title":"ADLH19 \/ Blue","offer_id":53167989489930,"sku":"LPRR_B_BL + ADLH19","price":152.08,"currency_code":"EUR","in_stock":true},{"title":"ADLH19 \/ Red","offer_id":53167989522698,"sku":"LPRR_B_RE + ADLH19","price":152.08,"currency_code":"EUR","in_stock":true},{"title":"ADLH19 \/ Bronze","offer_id":53167989555466,"sku":"LPRR_B_BR + ADLH19","price":152.08,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/guardbrakeblack_0e72903a-f924-4037-9061-4c02f39e1bf1.png?v=1780803422"},{"product_id":"aluminium-brake-lever-guard-bremshebelschutz-triumph-street-triple-765","title":"Bonamici Racing Aluminium Brake Lever Guard for Triumph Street Triple 765 S \/ R \/ RS (2023–2026) – LPRR_B","description":"\u003cp\u003eRider safety on the Street Triple 765 demands components that perform under pressure, and the Bonamici Racing LPRR_B brake lever guard delivers exactly that — Italian precision engineering machined to protect your brake lever from accidental contact during aggressive street riding or circuit sessions, without adding unnecessary weight or compromising the motorcycle's character.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eShields the brake lever from unintentional actuation caused by contact with other riders, debris, or crash scenarios — a critical safety advantage at speed and in close-quarters traffic\u003c\/li\u003e\n\u003cli\u003eAerodynamically optimised profile channels airflow at the handlebar end, improving stability at higher speeds and during spirited riding\u003c\/li\u003e\n\u003cli\u003eCNC-milled from high-grade aluminium for an outstanding strength-to-weight ratio and a refined racing aesthetic that suits the Street Triple 765's aggressive styling\u003c\/li\u003e\n\u003cli\u003ePlug-and-play fitment via the dedicated ADL765 adapter, engineered specifically for the Triumph OEM handlebar — no modifications required\u003c\/li\u003e\n\u003cli\u003eAvailable in eight anodised colour finishes to complement or contrast the bike's livery\u003c\/li\u003e\n\u003cli\u003e100% Made in Italy, manufactured to Bonamici Racing's exacting motorsport standards\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProtection and Performance in One\u003c\/h2\u003e\u003cp\u003eThe LPRR_B is not simply a cosmetic addition. Its primary function is the prevention of inadvertent braking — a genuine safety concern during track days, commuting in dense traffic, or any situation where handlebar contact is possible. By forming a physical barrier around the lever, the guard gives the rider confidence that an accidental touch will not trigger the front brake unexpectedly.\u003c\/p\u003e\u003cp\u003eBeyond that protective core, Bonamici's engineers have shaped the guard to work with the airflow at the handlebar end. At higher velocities, this aerodynamic consideration translates into a measurably more settled front end, giving the rider cleaner feedback through the bars when pushing on.\u003c\/p\u003e\u003ch2\u003eConstruction and Finish\u003c\/h2\u003e\u003cp\u003eEvery LPRR_B is machined from solid aluminium billet on CNC equipment in Italy. The process eliminates the inconsistencies associated with casting, producing a part that is both lighter and stronger than conventional alternatives. The matte anodised black finish — and the seven additional colour options — resist corrosion and wear while maintaining the precision-machined surfaces that define Bonamici Racing's catalogue.\u003c\/p\u003e\u003cp\u003eThe ADL765 adapter is included in the package and is purpose-designed for the Triumph Street Triple 765 OEM handlebar. Installation requires no drilling, no welding, and no permanent alteration to the motorcycle — it fits as the original lever should, only better protected.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eTriumph Street Triple 765 S (2023–2026)\u003c\/li\u003e\n\u003cli\u003eTriumph Street Triple 765 R (2023–2026)\u003c\/li\u003e\n\u003cli\u003eTriumph Street Triple 765 RS (2023–2026)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMounting position: right-hand side (brake lever). Compatible with OEM handlebar. Adapter ADL765 required and included.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eBonamici Racing LPRR_B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdapter\u003c\/td\u003e\n\u003ctd\u003eADL765 (for Triumph OEM handlebar)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eCNC-milled aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting side\u003c\/td\u003e\n\u003ctd\u003eRight (brake lever)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003ePlug and play — adapter included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003e100% Made in Italy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003eTriumph Street Triple 765 S \/ R \/ RS (2023–2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Bonamici Racing","offers":[{"title":"ADL765 \/ Black","offer_id":53167992471818,"sku":"LPRR_B_BK + ADL765","price":152.08,"currency_code":"EUR","in_stock":true},{"title":"ADL765 \/ Silver","offer_id":53167992504586,"sku":"LPRR_B_SI + ADL765","price":152.08,"currency_code":"EUR","in_stock":true},{"title":"ADL765 \/ Gold","offer_id":53167992537354,"sku":"LPRR_B_GO + ADL765","price":152.08,"currency_code":"EUR","in_stock":true},{"title":"ADL765 \/ Orange","offer_id":53167992570122,"sku":"LPRR_B_OR + ADL765","price":152.08,"currency_code":"EUR","in_stock":true},{"title":"ADL765 \/ Green","offer_id":53167992602890,"sku":"LPRR_B_GR + ADL765","price":152.08,"currency_code":"EUR","in_stock":true},{"title":"ADL765 \/ Blue","offer_id":53167992635658,"sku":"LPRR_B_BL + ADL765","price":152.08,"currency_code":"EUR","in_stock":true},{"title":"ADL765 \/ Red","offer_id":53167992668426,"sku":"LPRR_B_RE + ADL765","price":152.08,"currency_code":"EUR","in_stock":true},{"title":"ADL765 \/ Bronze","offer_id":53167992701194,"sku":"LPRR_B_BR + ADL765","price":152.08,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/guardbrakeblack_763d44fa-b2ba-405b-a417-517274b06a37.png?v=1780803444"},{"product_id":"lightech-iss120ra","title":"LighTech ISS120RA Aluminium Brake Lever Guard 148mm – CNC Ergal 7075 for Ø12mm to Ø20mm Handlebar","description":"\u003cp\u003eOn track, a stray hand or sleeve catching the brake lever at the wrong moment can cost more than lap time. The LighTech ISS120RA brake lever guard is built to prevent exactly that — 148mm of CNC-machined Ergal 7075 aluminium standing between your lever and the unpredictable world of close racing, tight overtakes, and crowded pit lanes.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e148mm guard length delivers an extended protection zone, ideal for circuit use where involuntary brake contact is a genuine risk during overtaking and close-quarters cornering.\u003c\/li\u003e\n\u003cli\u003eCNC-machined from Ergal 7075 aluminium — the same high-strength alloy used in racing components — for exceptional rigidity with minimal added weight.\u003c\/li\u003e\n\u003cli\u003eRight-hand fitment designed specifically to shield the brake lever from accidental activation or impact.\u003c\/li\u003e\n\u003cli\u003eCompatible with handlebar inner diameters from Ø12mm to Ø20mm via separately available adapters (KPL301, KPL329, KPL332, KPL302, KPL319, KPL321), making it suitable across a vast range of sport and superbike platforms.\u003c\/li\u003e\n\u003cli\u003eAvailable in seven anodised colours — black, silver, gold, orange, red, green, blue — so your guard integrates cleanly with any livery or colour scheme.\u003c\/li\u003e\n\u003cli\u003eMade in Italy by LighTech, a manufacturer trusted by race teams and road riders alike for precision-engineered aluminium accessories.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuilt for the Track, Ready for the Road\u003c\/h2\u003e\u003cp\u003eThe ISS120RA is at home wherever margin for error is small. On circuit, it prevents inadvertent brake application caused by contact with other riders, pit crew, or marshalling equipment. On the road, it adds a layer of confidence during lane filtering, tight mountain passes, and any situation where the lever might be bumped unintentionally. The coloured end cap provides a clean, purposeful finish that looks as deliberate as it is functional.\u003c\/p\u003e\u003cp\u003eConstruction from Ergal 7075 — a 7000-series aerospace-grade aluminium alloy — means the guard resists deformation under impact far better than standard 6061 aluminium, while keeping the assembly genuinely light. The CNC milling process ensures consistent wall thickness and precise mounting geometry every time.\u003c\/p\u003e\u003ch2\u003eAdapter Compatibility\u003c\/h2\u003e\u003cp\u003eThe ISS120RA accepts the full range of LighTech KPL adapters to suit handlebar inner diameters from Ø12mm up to Ø20mm. Adapters are sold separately — select the correct part number for your handlebar at the point of purchase. Note: the adapter is not included with the guard and must be ordered separately.\u003c\/p\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAdapter\u003c\/th\u003e\n\u003cth\u003eHandlebar Inner Diameter\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKPL301\u003c\/td\u003e\n\u003ctd\u003eØ12mm → 13.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKPL329\u003c\/td\u003e\n\u003ctd\u003eØ14mm → 15.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKPL332\u003c\/td\u003e\n\u003ctd\u003eØ15.6mm \/ Ø16.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKPL302\u003c\/td\u003e\n\u003ctd\u003eØ16mm → 17.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKPL319\u003c\/td\u003e\n\u003ctd\u003eØ18mm → 19.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKPL321\u003c\/td\u003e\n\u003ctd\u003eØ18.5mm \/ Ø20mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eColour Options and Part Numbers\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBlack – ISS120RANER\u003c\/li\u003e\n\u003cli\u003eGold – ISS120RAORO\u003c\/li\u003e\n\u003cli\u003eRed – ISS120RAROS\u003c\/li\u003e\n\u003cli\u003eSilver – ISS120RASIL\u003c\/li\u003e\n\u003cli\u003eBlue – ISS120RACOB\u003c\/li\u003e\n\u003cli\u003eGreen – ISS120RAVER\u003c\/li\u003e\n\u003cli\u003eOrange – ISS120RAARA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThe LighTech ISS120RA is a universal brake lever guard designed to fit any motorcycle with a handlebar inner diameter between Ø12mm and Ø20mm when paired with the appropriate KPL adapter. Compatible platforms include but are not limited to: Aprilia RSV4, RSV4 R, RSV4 RR, RSV4 RF, RSV4 1100, RSV4 1100 Factory, RS 660, RS 457; BMW S1000RR, M1000RR, HP4, HP4R; Ducati 848, 899, 959, 1199, 1199 S, 1199 R, 1299, 1299 S; Honda CBR 600 RR, CBR 1000 RR, CBR 1000 RR-R; Kawasaki ZX-6R, ZX-10R, ZX-10RR, ZX-4RR, Ninja 400; KTM RC 390, RC8 1190, 990 RC R; MV Agusta F3, F4; Suzuki GSX-R 600, GSX-R 750, GSX-R 1000; Triumph Daytona 675, Daytona 675 R, Daytona 765, Daytona 765 Moto 2, Street Triple 765 R, Street Triple 765 RS; Yamaha R1, R1M, R3, R6, R7, R9; Bimota KB998 Rimini; QJMotor SKR 800 RR; CFMoto 450 SR, 675 SR-R, V2 890, V2 955; and many more.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eModel: ISS120RA\u003c\/li\u003e\n\u003cli\u003eLength: 148mm\u003c\/li\u003e\n\u003cli\u003eMaterial: CNC-machined Ergal 7075 aluminium\u003c\/li\u003e\n\u003cli\u003eFitment side: right (brake lever)\u003c\/li\u003e\n\u003cli\u003eHandlebar inner diameter: Ø12mm to Ø20mm (adapter required, sold separately)\u003c\/li\u003e\n\u003cli\u003eManufacturer: LighTech – Made in Italy\u003c\/li\u003e\n\u003cli\u003eWhat's included: 1x brake lever guard (adapter not included)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"Without Adapter \/ Black","offer_id":53168000532746,"sku":null,"price":130.02,"currency_code":"EUR","in_stock":true},{"title":"Without Adapter \/ Silver","offer_id":53168000565514,"sku":null,"price":130.02,"currency_code":"EUR","in_stock":true},{"title":"Without Adapter \/ Gold","offer_id":53168000598282,"sku":null,"price":130.02,"currency_code":"EUR","in_stock":true},{"title":"Without Adapter \/ Orange","offer_id":53168000631050,"sku":null,"price":130.02,"currency_code":"EUR","in_stock":true},{"title":"Without Adapter \/ Red","offer_id":53168000663818,"sku":null,"price":130.02,"currency_code":"EUR","in_stock":true},{"title":"Without Adapter \/ Green","offer_id":53168000696586,"sku":null,"price":130.02,"currency_code":"EUR","in_stock":true},{"title":"Without Adapter \/ Blue","offer_id":53168000729354,"sku":null,"price":130.02,"currency_code":"EUR","in_stock":true},{"title":"KPL301 \/ Black","offer_id":53168000762122,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL301 \/ Silver","offer_id":53168000794890,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL301 \/ Gold","offer_id":53168000827658,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL301 \/ Orange","offer_id":53168000860426,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL301 \/ Red","offer_id":53168000893194,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL301 \/ Green","offer_id":53168000925962,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL301 \/ Blue","offer_id":53168000958730,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL329 \/ Black","offer_id":53168000991498,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL329 \/ Silver","offer_id":53168001024266,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL329 \/ Gold","offer_id":53168001057034,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL329 \/ Orange","offer_id":53168001089802,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL329 \/ Red","offer_id":53168001122570,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL329 \/ Green","offer_id":53168001155338,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL329 \/ Blue","offer_id":53168001188106,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL332 \/ Black","offer_id":53168001220874,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL332 \/ Silver","offer_id":53168001253642,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL332 \/ Gold","offer_id":53168001286410,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL332 \/ Orange","offer_id":53168001319178,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL332 \/ Red","offer_id":53168001351946,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL332 \/ Green","offer_id":53168001384714,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL332 \/ Blue","offer_id":53168001417482,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL302 \/ Black","offer_id":53168001450250,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL302 \/ Silver","offer_id":53168001483018,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL302 \/ Gold","offer_id":53168001515786,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL302 \/ Orange","offer_id":53168001548554,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL302 \/ Red","offer_id":53168001581322,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL302 \/ Green","offer_id":53168001614090,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL302 \/ Blue","offer_id":53168001646858,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL319 \/ Black","offer_id":53168001679626,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL319 \/ Silver","offer_id":53168001712394,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL319 \/ Gold","offer_id":53168001745162,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL319 \/ Orange","offer_id":53168001777930,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL319 \/ Red","offer_id":53168001810698,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL319 \/ Green","offer_id":53168001843466,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL319 \/ Blue","offer_id":53168001876234,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL321 \/ Black","offer_id":53168001909002,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL321 \/ Silver","offer_id":53168001941770,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL321 \/ Gold","offer_id":53168001974538,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL321 \/ Orange","offer_id":53168002007306,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL321 \/ Red","offer_id":53168002040074,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL321 \/ Green","offer_id":53168002072842,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL321 \/ Blue","offer_id":53168002105610,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ISS113RANER_a7540cdb-4c5e-4ce3-b666-bf0fd18955c8.png?v=1780803521"},{"product_id":"aluminium-motorgehause-panigale-v4","title":"Motocorse Right Engine Cover Ducati Panigale V4\/S\/R (2018-2024) – Aluminium with Titanium Bolts","description":"\u003cp\u003eWhen every gram and every tenth of a second counts on track, Motocorse delivers a right engine cover engineered to the same standard as factory race hardware. Precision CNC-machined from high-strength Anticorodal aluminium, anodised for lasting durability, and supplied complete with 18 solid-billet titanium bolts, this cover transforms a stock component into a genuine performance upgrade for the Ducati Panigale V4, V4S and V4R.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCNC-machined from high-strength Anticorodal aluminium billet for exceptional rigidity and reduced weight versus the standard cover\u003c\/li\u003e\n\u003cli\u003eSupplied with 18 machined solid-billet titanium bolts — saving unsprung mass and elevating the race-ready aesthetic in a single fitment\u003c\/li\u003e\n\u003cli\u003eHard anodised finish provides corrosion resistance and lasting surface integrity under track and road use alike\u003c\/li\u003e\n\u003cli\u003eDirect OEM-replacement fit — no drilling, cutting or modification required for the Panigale V4 platform\u003c\/li\u003e\n\u003cli\u003eAvailable in four anodised colours: silver, black, red and gold — each carrying a dedicated Motocorse part number\u003c\/li\u003e\n\u003cli\u003eGenuine Motocorse component, manufactured to the tolerances demanded by Superbike and track-day riders\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTrack Performance and Build Quality\u003c\/h2\u003e\u003cp\u003eMotocorse has built its reputation supplying components to racing teams demanding factory-level precision on the Ducati Panigale V4 platform. This right engine cover is CNC-machined in a single setup from a solid billet of Anticorodal aluminium — an alloy chosen specifically for its superior strength-to-weight ratio and resistance to the thermal cycling that characterises hard track use. The anodised surface treatment is not merely cosmetic: it hardens the alloy surface, resists oil and track debris, and retains its finish through prolonged sessions in a way that painted or uncoated covers cannot.\u003c\/p\u003e\u003cp\u003eThe 18 included titanium bolts are machined from solid bar stock rather than formed from tube or pressed material. Titanium's combination of high tensile strength and low density reduces rotating and reciprocating mass, and the material's natural corrosion resistance means no seizing or discolouration even after extended track use or exposure to brake fluid and chain lubricant. Together, the cover and its bolt kit represent a cohesive engineering package rather than a mixed-source assembly.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis Motocorse right engine cover is a direct, bolt-on replacement designed and manufactured specifically for the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale V4 (2018–2024)\u003c\/li\u003e\n\u003cli\u003eDucati Panigale V4S (2018–2024)\u003c\/li\u003e\n\u003cli\u003eDucati Panigale V4R (2018–2024)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNo drilling, tapping or chassis modification is required. The cover uses the existing mounting points and sealing surfaces of the original component, making installation straightforward with standard workshop tooling.\u003c\/p\u003e\u003ch2\u003eColour Options and Part Numbers\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSilver — part number 102110010S\u003c\/li\u003e\n\u003cli\u003eBlack — part number 102110010B\u003c\/li\u003e\n\u003cli\u003eRed — part number 102110010R\u003c\/li\u003e\n\u003cli\u003eGold — part number 102110010G\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMotocorse\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eComponent\u003c\/td\u003e\n\u003ctd\u003eRight engine cover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eAnticorodal aluminium, CNC-machined\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurface finish\u003c\/td\u003e\n\u003ctd\u003eAnodised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncluded fasteners\u003c\/td\u003e\n\u003ctd\u003e18 solid-billet titanium bolts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailable colours\u003c\/td\u003e\n\u003ctd\u003eSilver, black, red, gold\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eDucati Panigale V4, V4S, V4R (2018–2024)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart numbers\u003c\/td\u003e\n\u003ctd\u003e102110010S \/ 102110010B \/ 102110010R \/ 102110010G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Motocorse","offers":[{"title":"Silver","offer_id":53168012689674,"sku":"102110010S","price":2368.1,"currency_code":"EUR","in_stock":true},{"title":"Black","offer_id":53168012722442,"sku":"102110010B","price":2368.1,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":53168012755210,"sku":"102110010R","price":2368.1,"currency_code":"EUR","in_stock":true},{"title":"Gold","offer_id":53168012787978,"sku":"102110010G","price":2368.1,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/102110010S.png?v=1780803651"},{"product_id":"aluminium-bremshebelschutz-aprilia-rsv4-lightech-iss113ra","title":"LighTech Aluminium Brake Lever Guard 132mm for OE Handlebar – Aprilia RSV4 \/ 1100 Factory \/ R \/ RR \/ RF (2009–2026) ISS113RA","description":"\u003cp\u003eProtecting your brake lever from accidental activation is one of the most straightforward upgrades you can make to any RSV4, and the LighTech ISS113RA makes that protection genuinely easy to live with every day. Designed specifically for the right-hand side of the OE Aprilia handlebar, this 132 mm aluminium lever guard arrives with adapter KPL303 already included, so fitting it is a matter of minutes rather than a parts hunt.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCNC-machined from high-tensile aluminium and anodised for lasting corrosion resistance — built to the same standard as LighTech's race-derived components\u003c\/li\u003e\n\u003cli\u003ePrevents unintended brake application during close-contact riding situations and low-speed tip-overs in the paddock or car park\u003c\/li\u003e\n\u003cli\u003e132 mm guard length (measured from bar end to the centre of the protection arc) provides generous coverage without cluttering the cockpit\u003c\/li\u003e\n\u003cli\u003eSupplied with adapter KPL303 for a direct, no-modification fit to OEM Aprilia handlebars across the full 2009–2026 RSV4 range\u003c\/li\u003e\n\u003cli\u003eLaser-engraved LighTech logo confirms authenticity and adds a refined finish detail\u003c\/li\u003e\n\u003cli\u003eAvailable in seven anodised colours — black, silver, gold, orange, red, green and blue — so it integrates neatly with your bike's colour scheme\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePractical Protection, No Compromise\u003c\/h2\u003e\u003cp\u003eThe ISS113RA sits at the practical end of LighTech's accessories range: no track-only caveats, no complicated installation. Whether you are commuting, touring or heading to a track day, the guard does its job quietly. The CNC-aluminium construction keeps weight to a minimum while the anodised surface shrugs off road grime, brake fluid splashes and UV exposure without fading or corroding. Italian manufacture means the tolerances are tight and the finish is consistent across colour options.\u003c\/p\u003e\u003ch2\u003eColour Personalisation\u003c\/h2\u003e\u003cp\u003eThe end cap is available separately in additional colours, giving you further scope to match or contrast with other LighTech components on the bike. The seven main colour options — black, silver, gold, orange, red, green and blue — cover the most popular RSV4 colour palettes without requiring any additional modification.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis lever guard is designed and tested for the following models with the standard OEM handlebar:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAprilia RSV4 (all variants: R, RR, RF, Factory, 1100 Factory) — model years 2009 through 2026\u003c\/li\u003e\n\u003cli\u003ePosition: right-hand side (brake lever) only\u003c\/li\u003e\n\u003cli\u003eRequires OE handlebar; adapter KPL303 is included in the box\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eLighTech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eISS113RA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncluded adapter\u003c\/td\u003e\n\u003ctd\u003eKPL303\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGuard length\u003c\/td\u003e\n\u003ctd\u003e132 mm (bar end to centre of protection arc)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eCNC-machined aluminium, anodised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePosition\u003c\/td\u003e\n\u003ctd\u003eRight-hand side (brake lever)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eOEM Aprilia handlebar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible models\u003c\/td\u003e\n\u003ctd\u003eAprilia RSV4 \/ 1100 Factory \/ R \/ RR \/ RF (2009–2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of manufacture\u003c\/td\u003e\n\u003ctd\u003eItaly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"LighTech","offers":[{"title":"With Adapter KPL303 \/ Black","offer_id":53168129310986,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"With Adapter KPL303 \/ Silver","offer_id":53168129343754,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"With Adapter KPL303 \/ Gold","offer_id":53168129376522,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"With Adapter KPL303 \/ Orange","offer_id":53168129409290,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"With Adapter KPL303 \/ Red","offer_id":53168129442058,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"With Adapter KPL303 \/ Green","offer_id":53168129474826,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"With Adapter KPL303 \/ Blue","offer_id":53168129507594,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ISS113RANER_b3ed92d0-da02-47cd-a9fc-dcd73f0c0554.png?v=1780804309"},{"product_id":"aluminium-bremshebelschutz-132mm-bmw-k46-iss113ra","title":"LighTech Aluminium Brake Lever Guard 132mm – BMW S1000RR K46 (2009–2018) ISS113RA","description":"\u003cp\u003eA comfortable, confident ride on the BMW S1000RR K46 starts with controls that feel exactly right, and that means protecting the brake lever from the kind of accidental contact that can ruin a corner or a track session. The LighTech ISS113RA brake lever guard is CNC-machined from solid aluminium and engineered specifically for the right-hand (brake) side of the stock S1000RR K46 handlebar, giving you the assurance of a purpose-built fit that never compromises your grip or your confidence.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCNC-machined aluminium construction delivers a rigid, lightweight guard that sits cleanly at the handlebar end without adding unwanted bulk to your right hand's natural resting position.\u003c\/li\u003e\n\u003cli\u003e132 mm guard length provides meaningful protection against accidental brake activation during tight cornering or close-quarters riding, on road or track alike.\u003c\/li\u003e\n\u003cli\u003eAnodised finish with laser-engraved LighTech logo resists corrosion and maintains its appearance through extended daily use or repeated track days.\u003c\/li\u003e\n\u003cli\u003eDesigned exclusively for the right-hand (brake lever) side of the BMW S1000RR K46 OE handlebar, ensuring a precise, rattle-free installation from the outset.\u003c\/li\u003e\n\u003cli\u003eAdapter KPL325 is included where selected, making the guard fully OEM-compatible with the stock S1000RR K46 bar end — no hunting for additional hardware.\u003c\/li\u003e\n\u003cli\u003eEnd cap colour can be personalised via separately available options, allowing a subtle customisation to match your bike's livery.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuilt for the S1000RR Rider\u003c\/h2\u003e\u003cp\u003eLighTech designs its lever guards with the understanding that all-day comfort and a secure fit are inseparable. The ISS113RA mounts directly at the handlebar end, so there is no interference with your grip width or lever reach. The anodised aluminium feels premium under the hand, and the guard's profile is kept slim enough that it never creates an awkward pressure point during extended motorway stints or long circuit sessions. Whether you are commuting through city traffic or pushing hard on a twisty road, the guard sits unobtrusively until the moment it is needed.\u003c\/p\u003e\u003ch2\u003eTrack-Proven Protection\u003c\/h2\u003e\u003cp\u003eOn the track, accidental brake application mid-corner is one of the most dangerous events a rider can experience. The ISS113RA's 132 mm aluminium body intercepts handlebar-to-barrier or handlebar-to-bike contact before it can reach the brake lever, giving the rider a critical fraction of a second of additional control. The guard is equally valuable in road riding scenarios where filtering through traffic or a sudden lean can bring the lever into unintended contact with another vehicle.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis brake lever guard is designed and verified to fit the following motorcycle:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBMW S1000RR K46 — model years 2009 to 2018\u003c\/li\u003e\n\u003cli\u003eFits the OE (original equipment) handlebar on the right-hand (brake lever) side\u003c\/li\u003e\n\u003cli\u003eWhen ordered with adapter KPL325, no additional hardware is required for installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eLighTech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eISS113RA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGuard length\u003c\/td\u003e\n\u003ctd\u003e132 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSide\u003c\/td\u003e\n\u003ctd\u003eRight (brake lever)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eCNC-machined aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eAnodised with laser-engraved LighTech logo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eBMW S1000RR K46 (2009–2018), OE handlebar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOptional adapter\u003c\/td\u003e\n\u003ctd\u003eKPL325 (OEM-compatible bar end adapter)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"LighTech","offers":[{"title":"with adapter KPL325 \/ Black","offer_id":53168131014922,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with adapter KPL325 \/ Silver","offer_id":53168131047690,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with adapter KPL325 \/ Gold","offer_id":53168131080458,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with adapter KPL325 \/ Orange","offer_id":53168131113226,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with adapter KPL325 \/ Red","offer_id":53168131145994,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with adapter KPL325 \/ Green","offer_id":53168131178762,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with adapter KPL325 \/ Blue","offer_id":53168131211530,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ISS113RANER_a1f5c3e5-f926-40d2-a144-281ac0357ae5.png?v=1780804320"},{"product_id":"aluminium-brake-lever-guard-bremshebelschutz-148mm-fur-oe-lenker-bmw-s1000rr-k46-09-18-lightech-iss120ra","title":"LighTech ISS120RA Aluminium Brake Lever Guard 148mm – BMW S1000RR K46 2009–2018","description":"\u003cp\u003eEngineered for riders who take safety as seriously as lap times, the LighTech ISS120RA brake lever guard delivers certified-level protection against accidental brake actuation on the BMW S1000RR K46. Whether you're navigating a tight pack on track or manoeuvring in the paddock, this 148 mm CNC-machined aluminium guard stands between your front brake lever and a potentially dangerous unintended input.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eGuards against accidental brake actuation in close rider contact, tip-overs and paddock manoeuvring — directly reducing the risk of front wheel lock-up\u003c\/li\u003e\n\u003cli\u003eCNC-machined from high-grade aluminium with an anodised finish for exceptional durability and corrosion resistance\u003c\/li\u003e\n\u003cli\u003eLaser-engraved LighTech logo for a precision, race-ready aesthetic that complements OEM and aftermarket bodywork\u003c\/li\u003e\n\u003cli\u003e148 mm guard length provides extended coverage aligned with the ergonomic lever reach typical of aggressive, sport-riding positions\u003c\/li\u003e\n\u003cli\u003eInterchangeable coloured end cap (available separately) lets you personalise the guard to match your livery\u003c\/li\u003e\n\u003cli\u003eAdapter KPL325 included — fits directly to the OEM handlebar of the BMW S1000RR K46 with no additional hardware required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSafety First: Why a Lever Guard Matters\u003c\/h2\u003e\u003cp\u003eA brake lever guard is not a styling accessory — it is a recognised safety device used across circuit racing classes worldwide. By shrouding the brake lever from external contact, the ISS120RA prevents the scenario every track-day rider fears: an adjacent machine or a fall catching the lever and locking the front wheel at speed. The 148 mm length has been chosen specifically to cover the operative section of the lever without impeding the rider's natural braking technique, keeping protection and control in perfect balance.\u003c\/p\u003e\u003ch2\u003eConstruction and Finish\u003c\/h2\u003e\u003cp\u003eLighTech machines the ISS120RA from aircraft-grade aluminium billet on CNC centres, then hard-anodises each unit to produce a surface that resists track grime, brake fluid splatter and UV degradation without adding unnecessary mass. The laser-engraved branding sits flush with the anodised surface, so it will not peel or fade over seasons of hard use. Seven anodised colour options — black, silver, gold, orange, red, green and blue — allow the guard to integrate seamlessly with virtually any S1000RR livery.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis lever guard is engineered exclusively for the BMW S1000RR K46 covering model years 2009 through 2018. It mounts to the right-hand (brake) side of the original BMW OEM handlebar. The included adapter KPL325 is purpose-made for this fitment, meaning the guard bolts on without sourcing additional components. Riders running aftermarket handlebars should verify clamp diameter and lever boss dimensions before ordering.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart number: ISS120RA\u003c\/li\u003e\n\u003cli\u003eIncluded adapter: KPL325\u003c\/li\u003e\n\u003cli\u003eFitment: BMW S1000RR K46, 2009–2018\u003c\/li\u003e\n\u003cli\u003eMounting side: Right (brake)\u003c\/li\u003e\n\u003cli\u003eGuard length: 148 mm (from bar end to guard centre)\u003c\/li\u003e\n\u003cli\u003eMaterial: CNC-machined aluminium\u003c\/li\u003e\n\u003cli\u003eFinish: Hard-anodised with laser-engraved LighTech logo\u003c\/li\u003e\n\u003cli\u003eEnd cap: Interchangeable coloured end cap (optional, sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"KPL325 \/ Black","offer_id":53168131244298,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL325 \/ Silver","offer_id":53168131277066,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL325 \/ Gold","offer_id":53168131309834,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL325 \/ Orange","offer_id":53168131342602,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL325 \/ Red","offer_id":53168131375370,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL325 \/ Green","offer_id":53168131408138,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL325 \/ Blue","offer_id":53168131440906,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ISS113RANER_86eadd7e-91a9-487a-8c03-02e5fb144d5e.png?v=1780804320"},{"product_id":"aluminium-brake-lever-guard-bremshebelschutz-132mm-fur-oe-lenker-bmw-s1000rr-k67-19-25-lightech-iss113ra","title":"LighTech Aluminium Brake Lever Guard 132mm for BMW S1000RR K67 (2019-2026) – ISS113RA with Adapter KPL330","description":"\u003cp\u003eA practical, well-engineered upgrade for any BMW S1000RR K67 owner, the LighTech ISS113RA brake lever guard delivers genuine everyday protection against accidental brake activation — whether you are filtering through traffic, navigating a busy pit lane, or simply parking up after a spirited ride. At 132 mm in length it stays compact and unobtrusive, yet covers exactly the area that matters.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrevents unintended braking caused by contact with other riders, objects or tight spaces, significantly reducing the risk of a fall in real-world conditions\u003c\/li\u003e\n\u003cli\u003eCNC-machined from high-grade aluminium and anodised for a durable, corrosion-resistant finish that holds its finish through daily use and all weathers\u003c\/li\u003e\n\u003cli\u003eLaser-engraved LighTech logo gives a clean, factory-quality appearance without adding clutter to the cockpit\u003c\/li\u003e\n\u003cli\u003eAdapter KPL330 — designed specifically for the BMW S1000RR K67 OEM handlebar — is included in the box, so no additional parts are required\u003c\/li\u003e\n\u003cli\u003eAvailable in seven anodised colours: black, silver, gold, orange, red, green and blue, letting you match or contrast your machine's livery\u003c\/li\u003e\n\u003cli\u003eOptional end cap in a colour of your choice is available separately for a further personal touch\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Design\u003c\/h2\u003e\u003cp\u003eLighTech manufactures the ISS113RA from solid aluminium billet using CNC machining, ensuring consistent dimensions and a precise fit every time. The anodised surface treatment bonds to the metal rather than sitting on top of it, so the colour resists chipping and fading across the guard's service life. The laser-engraved branding keeps the look purposeful without the bulk of adhesive badges or decals.\u003c\/p\u003e\u003cp\u003eAt 132 mm the guard is dimensioned to suit the compact, tucked-in ergonomics of the S1000RR K67 without fouling the throttle side controls or the cockpit surrounds. Mounting is straightforward: the included KPL330 adapter mates directly with the OEM BMW handlebar, requiring no modification to the bike.\u003c\/p\u003e\u003ch2\u003eRoad, Commute and Track Use\u003c\/h2\u003e\u003cp\u003eBrake lever guards are often associated purely with track days, but the ISS113RA earns its keep on the road too. In slow-moving urban traffic or on congested motorway runs the guard eliminates the possibility of an accidental brake input from a brush against a vehicle or barrier. On track, it adds the same layer of security in close-quarters riding without altering the feel of the brake lever itself.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis guard fits the right-hand side (brake lever) of the following motorcycle:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBMW S1000RR K67 — model years 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eFitment is to the original equipment (OEM) handlebar using the supplied KPL330 adapter. No additional hardware is needed.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eLighTech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eISS113RA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncluded adapter\u003c\/td\u003e\n\u003ctd\u003eKPL330\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e132 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePosition\u003c\/td\u003e\n\u003ctd\u003eRight side (brake lever)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eCNC-machined aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurface finish\u003c\/td\u003e\n\u003ctd\u003eAnodised with laser-engraved LighTech logo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eBMW S1000RR K67 (2019–2026), OEM handlebar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"LighTech","offers":[{"title":"with adapter KPL330 \/ Black","offer_id":53168131571978,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with adapter KPL330 \/ Silver","offer_id":53168131604746,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with adapter KPL330 \/ Gold","offer_id":53168131637514,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with adapter KPL330 \/ Orange","offer_id":53168131670282,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with adapter KPL330 \/ Red","offer_id":53168131703050,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with adapter KPL330 \/ Green","offer_id":53168131735818,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with adapter KPL330 \/ Blue","offer_id":53168131768586,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ISS113RANER_266f5e6d-e80f-4817-bede-1f3644a96dde.png?v=1780804326"},{"product_id":"aluminium-brake-lever-guard-bremshebelschutz-132mm-fur-oe-lenker-ducati-panigale-899-13-16-lightech-iss113ra","title":"LighTech ISS113RA Aluminium Brake Lever Guard 132mm – Ducati Panigale 899 (2013–2016)","description":"\u003cp\u003ePrecision-crafted from high-strength CNC-machined aluminium and finished with a laser-engraved LighTech logo, the ISS113RA brake lever guard is a component where Italian racing heritage meets everyday function. Designed specifically for the Ducati Panigale 899 on its original OE handlebar, this 132 mm guard shields the front brake lever from accidental contact — whether you are threading through traffic or pushing hard on track.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCNC-machined from high-strength aluminium for a precise, rattle-free fit with no excess bulk\u003c\/li\u003e\n\u003cli\u003eAnodised finish with laser-engraved LighTech logo — a clean, factory-quality aesthetic that holds up to the elements\u003c\/li\u003e\n\u003cli\u003e132 mm length strikes the ideal balance between meaningful lever protection and compact sportbike ergonomics\u003c\/li\u003e\n\u003cli\u003ePrevents accidental front brake engagement from track debris, bodywork contact or road incidents\u003c\/li\u003e\n\u003cli\u003eInterchangeable end cap design allows colour personalisation — end caps sold separately in multiple finishes\u003c\/li\u003e\n\u003cli\u003eAdapter KPL318 for the OEM Ducati handlebar is included, delivering a direct bolt-on installation with no additional parts required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign, Finish and Heritage\u003c\/h2\u003e\u003cp\u003eLighTech has built its reputation supplying the WorldSBK paddock with components that look as purposeful as they perform. The ISS113RA reflects that lineage: every surface is CNC-machined to tight tolerances, then anodised to resist corrosion and scratching across thousands of road miles or track sessions. The laser-engraved logo is not a sticker — it is cut directly into the material, so the branding remains crisp regardless of weather or abrasion.\u003c\/p\u003e\u003cp\u003eThe anodised colour options — black, silver, gold, orange, red, green and blue — mean the guard can be matched to a Panigale's livery or personalised to the rider's taste. The swappable end cap extends that flexibility further, allowing a subtle update without replacing the entire assembly.\u003c\/p\u003e\u003ch2\u003ePerformance and Protection\u003c\/h2\u003e\u003cp\u003eAt 132 mm from the bar end to the guard centre, the ISS113RA offers genuine protection against the lever being inadvertently depressed by a gloved hand catching bodywork, a rival's bike touching at close quarters, or debris on the road. The guard does not impede normal braking — lever reach and feel remain entirely unchanged — but it stands as a physical barrier against the one moment of contact that could lock the front wheel at speed.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThe ISS113RA is engineered specifically for the Ducati Panigale 899 fitted with the standard OEM handlebar. Adapter KPL318 is included and provides a precise, secure interface with that factory bar. No machining, drilling or supplementary hardware is needed.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale 899 — model years 2013, 2014, 2015, 2016\u003c\/li\u003e\n\u003cli\u003eRight-hand side (front brake lever) fitment only\u003c\/li\u003e\n\u003cli\u003eOE (stock) handlebar — adapter KPL318 included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eLighTech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eISS113RA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e132 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eCNC-machined high-strength aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eAnodised with laser-engraved LighTech logo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Side\u003c\/th\u003e\n\u003ctd\u003eRight (front brake lever)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIncluded Adapter\u003c\/th\u003e\n\u003ctd\u003eKPL318 (for OEM Ducati handlebar)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003ctd\u003eDucati Panigale 899 (2013–2016)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"LighTech","offers":[{"title":"with adapter KPL318 \/ Black","offer_id":53168132817162,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with adapter KPL318 \/ Silver","offer_id":53168132849930,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with adapter KPL318 \/ Gold","offer_id":53168132882698,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with adapter KPL318 \/ Orange","offer_id":53168132915466,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with adapter KPL318 \/ Red","offer_id":53168132948234,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with adapter KPL318 \/ Green","offer_id":53168132981002,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with adapter KPL318 \/ Blue","offer_id":53168133013770,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ISS113RANER_4b7c3875-f0d8-499a-a640-d48cb7d78b75.png?v=1780804334"},{"product_id":"aluminium-brake-lever-guard-bremshebelschutz-148mm-fur-oe-lenker-ducati-panigale-959-16-19-lightech-iss120ra","title":"LighTech ISS120RA Aluminium Brake Lever Guard 148mm for Ducati Panigale 959 (2016–2019) – OE Handlebar Fit","description":"\u003cp\u003eAccidental brake lever actuation is one of the most underestimated hazards on both road and track. The LighTech ISS120RA brake lever guard addresses that risk directly, wrapping your Ducati Panigale 959's front brake lever in precision CNC-machined Italian aluminium that reliably prevents unintended contact from clothing, bodywork, or an errant hand.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePurpose-designed to eliminate accidental front brake activation on the Ducati Panigale 959 (2016–2019) — a genuine safety upgrade for road and track use alike\u003c\/li\u003e\n\u003cli\u003eMachined from high-tensile aluminium billet and anodised for lasting corrosion resistance and a factory-quality finish\u003c\/li\u003e\n\u003cli\u003e148 mm guard length provides comprehensive protection across the full lever sweep\u003c\/li\u003e\n\u003cli\u003eRight-hand fitment engineered specifically for OE (stock) handlebars — no modification required\u003c\/li\u003e\n\u003cli\u003eLaser-engraved LighTech logo confirms authenticity and adds a clean, premium aesthetic\u003c\/li\u003e\n\u003cli\u003eColour-customisable: the end cap is available separately, letting you tailor the guard to your bike's livery\u003c\/li\u003e\n\u003cli\u003eShips complete with adapter KPL318 — ready to install straight from the box\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuilt in Italy, Engineered for Safety\u003c\/h2\u003e\u003cp\u003eLighTech produce this brake lever guard at their facility in Italy using CNC milling processes that hold exceptionally tight tolerances. The result is a component that fits flush against the OE handlebar without play or rattle, and whose anodised surface sheds water and resists the abrasion of everyday use. The laser-engraved branding is recessed into the surface rather than applied as a sticker, so it will still be legible long after less carefully finished alternatives have worn bare.\u003c\/p\u003e\u003ch2\u003eRoad and Track Application\u003c\/h2\u003e\u003cp\u003eOn the road the ISS120RA protects against contact from riding jacket sleeves, barriers, and passing traffic. On circuit the guard becomes even more critical, where tyre warmers, pit-lane equipment, or the proximity of other riders can inadvertently press the lever. Many track-day organisers and club racing regulations specifically recommend or require lever guards of this type, making the ISS120RA a considered investment rather than a cosmetic addition.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThe LighTech ISS120RA with adapter KPL318 is engineered exclusively for the following fitment:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale 959 — model years 2016, 2017, 2018, 2019\u003c\/li\u003e\n\u003cli\u003eFits original equipment (OE) handlebars only\u003c\/li\u003e\n\u003cli\u003eRight-hand (front brake lever) side\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eLighTech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eISS120RA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdapter\u003c\/td\u003e\n\u003ctd\u003eKPL318 (included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eCNC-machined high-tensile aluminium, anodised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGuard length\u003c\/td\u003e\n\u003ctd\u003e148 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment side\u003c\/td\u003e\n\u003ctd\u003eRight (front brake lever)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHandlebar compatibility\u003c\/td\u003e\n\u003ctd\u003eOE (stock) handlebars\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible model\u003c\/td\u003e\n\u003ctd\u003eDucati Panigale 959 (2016–2019)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of manufacture\u003c\/td\u003e\n\u003ctd\u003eItaly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"LighTech","offers":[{"title":"KPL318 \/ Black","offer_id":53168133898506,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL318 \/ Silver","offer_id":53168133931274,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL318 \/ Gold","offer_id":53168133964042,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL318 \/ Orange","offer_id":53168133996810,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL318 \/ Red","offer_id":53168134029578,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL318 \/ Green","offer_id":53168134062346,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL318 \/ Blue","offer_id":53168134095114,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ISS113RANER_640a4185-9e38-410a-8462-efa91409b7e8.png?v=1780804340"},{"product_id":"aluminium-brake-lever-guard-bremshebelschutz-132mm-ducati-panigale-1199","title":"LighTech Aluminium Brake Lever Guard 132mm – Ducati Panigale 1199\/S\/R (2012–2017) ISS113RA","description":"\u003cp\u003eWhen the margins between a clean lap and a costly mistake are razor thin, the LighTech ISS113RA brake lever guard delivers the protection that serious Ducati Panigale 1199 riders demand on track and road alike. CNC-machined from high-strength aluminium, this 132mm right-side lever guard eliminates the risk of unintended braking on contact — the kind of incident that ends race days before they begin.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrecision CNC-machined from high-strength aluminium for a rigid, lightweight construction that holds up under the stresses of track use\u003c\/li\u003e\n\u003cli\u003e132mm guard length provides comprehensive coverage of the OE brake lever on the Ducati Panigale 1199, 1199 S and 1199 R\u003c\/li\u003e\n\u003cli\u003ePrevents inadvertent brake actuation on contact — a critical safety feature in close racing and paddock environments\u003c\/li\u003e\n\u003cli\u003eLaser-engraved LighTech logo adds a refined, purposeful finish without adding unnecessary mass\u003c\/li\u003e\n\u003cli\u003eColour-matched end cap available in seven anodised finishes to complement your Panigale's livery\u003c\/li\u003e\n\u003cli\u003eIncludes fitment-specific adapter KPL318 for a direct, no-modification install on OE handlebars\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuilt for the Panigale 1199 on Track and Road\u003c\/h2\u003e\u003cp\u003eLighTech engineered the ISS113RA specifically around the geometry of the Ducati Panigale 1199's OE handlebar and stock brake lever layout. The right-hand mounting position and 132mm reach ensure the guard sits correctly relative to the lever tip, offering real protection rather than a cosmetic accessory. CNC machining from billet aluminium means tolerances are tight, fitment is exact, and the guard will not flex or shift under impact.\u003c\/p\u003e\u003ch2\u003eAnodised Finish Options\u003c\/h2\u003e\u003cp\u003eThe ISS113RA is offered in seven anodised colours — black, silver, gold, orange, red, green, and blue — allowing you to integrate the guard cleanly into a race livery or contrast it deliberately against the Panigale's bodywork. The laser-engraved LighTech branding confirms provenance without cluttering the visual line of the cockpit.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis brake lever guard is designed exclusively for the following models fitted with OE (stock) handlebars:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale 1199 (2012–2017)\u003c\/li\u003e\n\u003cli\u003eDucati Panigale 1199 S (2012–2017)\u003c\/li\u003e\n\u003cli\u003eDucati Panigale 1199 R (2012–2017)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe included adapter KPL318 is required for correct installation and is supplied as part of this kit. Verify your handlebar configuration is OE before ordering.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: LighTech\u003c\/li\u003e\n\u003cli\u003ePart number: ISS113RA\u003c\/li\u003e\n\u003cli\u003eGuard length: 132mm\u003c\/li\u003e\n\u003cli\u003eMaterial: CNC-machined high-strength aluminium\u003c\/li\u003e\n\u003cli\u003eMounting side: right (brake lever)\u003c\/li\u003e\n\u003cli\u003eFinish: anodised, laser-engraved LighTech logo\u003c\/li\u003e\n\u003cli\u003eIncluded adapter: KPL318\u003c\/li\u003e\n\u003cli\u003eFitment: Ducati Panigale 1199 \/ 1199 S \/ 1199 R, 2012–2017, OE handlebars\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"with Adapter KPL318 \/ Black","offer_id":53168134226186,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with Adapter KPL318 \/ Silver","offer_id":53168134258954,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with Adapter KPL318 \/ Gold","offer_id":53168134291722,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with Adapter KPL318 \/ Orange","offer_id":53168134324490,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with Adapter KPL318 \/ Red","offer_id":53168134357258,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with Adapter KPL318 \/ Green","offer_id":53168134390026,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with Adapter KPL318 \/ Blue","offer_id":53168134422794,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ISS113RANER_22cc38fb-c301-4631-82b8-56c10f68c09b.png?v=1780804343"},{"product_id":"aluminium-brake-lever-guard-bremshebelschutz-132mm-oe-lenker-ducati-panigale-1299-s","title":"LighTech Aluminium Brake Lever Guard 132mm – Ducati Panigale 1299\/S (2015–2018) with Adapter KPL318","description":"\u003cp\u003eEngineered for the demands of track days and serious road riding alike, the LighTech ISS113RA brake lever guard brings genuine race-derived protection to the Ducati Panigale 1299\/S. Precision CNC-milled in Italy from high-strength aluminium, this 132 mm right-side guard prevents accidental brake actuation on contact — a critical safety advantage when cornering hard or running in close company on circuit.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCNC-machined in Italy from high-strength aluminium for a lightweight, rigid construction that stands up to race-pace incidents\u003c\/li\u003e\n\u003cli\u003e132 mm length, designed for right-side fitment on original-equipment (OE) handlebars of the Ducati Panigale 1299\/S\u003c\/li\u003e\n\u003cli\u003eLaser-engraved LighTech logo delivers the refined finish expected of premium Italian aftermarket components\u003c\/li\u003e\n\u003cli\u003eColour-matched end cap available in seven anodised finishes — black, silver, gold, orange, red, green and blue — for personalised track aesthetics\u003c\/li\u003e\n\u003cli\u003eIncludes dedicated adapter KPL318 for straightforward, bolt-on installation with no fabrication required\u003c\/li\u003e\n\u003cli\u003eGuards against unintended braking on contact, protecting rider confidence at both road and circuit speeds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eItalian Craftsmanship for the Track\u003c\/h2\u003e\u003cp\u003eLighTech has built its reputation supplying components to racing teams and performance riders across Europe, and the ISS113RA reflects that pedigree. Every guard is machined from solid aluminium billet in Italy, keeping weight low while ensuring the structural rigidity needed to absorb impact without deforming onto the lever. The laser-engraved logo is a mark of provenance, not mere decoration — it confirms you are fitting a component made to the same tolerances as those seen in the paddock.\u003c\/p\u003e\u003ch2\u003eProtection Without Compromise\u003c\/h2\u003e\u003cp\u003eOn a short-circuit layout where bikes run close and contact is a real possibility, an unprotected brake lever is a liability. The 132 mm guard extends far enough along the lever to intercept a handlebar strike or glancing blow from another machine, preventing the brake from being dragged on mid-corner. The same logic applies on the road: a stumble, a dropped bike, or a low-speed tip-over will not result in a snapped lever or an accidental front-brake input. The anodised aluminium construction resists corrosion and maintains its appearance through seasons of hard use.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThe LighTech ISS113RA brake lever guard is designed specifically to fit the original-equipment handlebars of the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale 1299 — 2015, 2016, 2017, 2018\u003c\/li\u003e\n\u003cli\u003eDucati Panigale 1299 S — 2015, 2016, 2017, 2018\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAdapter KPL318 is included and required for correct fitment on OE bars. Always verify handlebar specification before ordering if non-standard bars have been fitted.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eLighTech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eISS113RA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e132 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eCNC-machined aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Side\u003c\/th\u003e\n\u003ctd\u003eRight (brake lever)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Models\u003c\/th\u003e\n\u003ctd\u003eDucati Panigale 1299\/S (2015–2018)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHandlebar Compatibility\u003c\/th\u003e\n\u003ctd\u003eOE (original-equipment) handlebars\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIncluded Adapter\u003c\/th\u003e\n\u003ctd\u003eKPL318\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCountry of Manufacture\u003c\/th\u003e\n\u003ctd\u003eItaly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"LighTech","offers":[{"title":"with Adapter KPL318 \/ Black","offer_id":53168135241994,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with Adapter KPL318 \/ Silver","offer_id":53168135274762,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with Adapter KPL318 \/ Gold","offer_id":53168135307530,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with Adapter KPL318 \/ Orange","offer_id":53168135340298,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with Adapter KPL318 \/ Red","offer_id":53168135373066,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with Adapter KPL318 \/ Green","offer_id":53168135405834,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with Adapter KPL318 \/ Blue","offer_id":53168135438602,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ISS113RANER_034e37f0-82e6-4ea4-a6d4-41ed3a8e63f6.png?v=1780804347"},{"product_id":"aluminium-brake-lever-guard-bremshebelschutz-132mm-fur-oe-lenker-ducati-panigale-v2-955-20-24-lightech-iss113ra","title":"LighTech Aluminium Brake Lever Guard 132mm for Ducati Panigale V2 955 (2020-2024) – ISS113RA with Adapter KPL318","description":"\u003cp\u003eRiding hard on road or track is far more enjoyable when you know your brake lever is protected. The LighTech ISS113RA aluminium brake lever guard is a 132 mm right-hand fitment precision-made in Italy for the Ducati Panigale V2 955 (2020–2024), ready to bolt straight onto OE handlebars — adapter KPL318 is already included in the box.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCNC-machined from high-strength aluminium with an anodised finish that resists corrosion and everyday wear\u003c\/li\u003e\n\u003cli\u003eLaser-engraved LighTech logo adds a refined, race-inspired detail without adding unnecessary weight\u003c\/li\u003e\n\u003cli\u003e132 mm length sized precisely for the right-hand OE handlebar of the Panigale V2 955\u003c\/li\u003e\n\u003cli\u003eAdapter KPL318 included — no extra parts to source, no delays, fit it the same day it arrives\u003c\/li\u003e\n\u003cli\u003eColoured end cap available separately, allowing straightforward personalisation to match your bike's livery\u003c\/li\u003e\n\u003cli\u003ePrevents accidental brake lever actuation on contact, reducing risk on both public roads and circuit days\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuilt in Italy, Engineered for Real-World Use\u003c\/h2\u003e\u003cp\u003eLighTech has been producing precision CNC components in Italy for decades, and the ISS113RA reflects that heritage. The guard is machined from a solid billet of high-strength aluminium — not cast, not pressed — giving it the structural integrity to absorb an impact that would otherwise send your brake lever straight to the bar. The anodised surface is uniform, hard-wearing, and available in seven colours so the guard complements rather than clashes with your machine. Whether you commute on the V2 during the week or take it to a trackday at the weekend, the quality of finish holds up under daily use.\u003c\/p\u003e\u003ch2\u003eWhy a Brake Lever Guard Matters\u003c\/h2\u003e\u003cp\u003eAny fall, tip-over in a car park, or brush with another bike in pit lane can snap an unprotected brake lever in an instant. A lever guard intercepts that force before it reaches the lever itself, and it prevents the lever from being accidentally pushed to the bar — a scenario that can cause a dangerous unintended stop. Fitting one is one of the simplest, most cost-effective safety upgrades available for a performance naked or supersport, and at 132 mm the LighTech unit gives comprehensive coverage without obstructing your normal riding position.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis brake lever guard is designed specifically for the original equipment (OE) handlebars of the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDucati Panigale V2 955 — model years 2020, 2021, 2022, 2023, 2024\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThe required adapter KPL318 is supplied with the guard. If your Panigale V2 has aftermarket clip-ons or a non-standard bar end diameter, please verify compatibility before ordering.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: LighTech\u003c\/li\u003e\n\u003cli\u003ePart number: ISS113RA\u003c\/li\u003e\n\u003cli\u003eIncluded adapter: KPL318\u003c\/li\u003e\n\u003cli\u003eLength: 132 mm\u003c\/li\u003e\n\u003cli\u003ePosition: right-hand side\u003c\/li\u003e\n\u003cli\u003eMaterial: CNC-machined high-strength aluminium, anodised finish\u003c\/li\u003e\n\u003cli\u003eLogo: laser-engraved LighTech branding\u003c\/li\u003e\n\u003cli\u003eFitment: OE handlebars, Ducati Panigale V2 955 (2020–2024)\u003c\/li\u003e\n\u003cli\u003eCountry of manufacture: Italy\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"with Adapter KPL318 \/ Black","offer_id":53168136454410,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with Adapter KPL318 \/ Silver","offer_id":53168136487178,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with Adapter KPL318 \/ Gold","offer_id":53168136519946,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with Adapter KPL318 \/ Orange","offer_id":53168136552714,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with Adapter KPL318 \/ Red","offer_id":53168136585482,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with Adapter KPL318 \/ Green","offer_id":53168136618250,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with Adapter KPL318 \/ Blue","offer_id":53168136651018,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ISS113RANER_8c908781-65cc-43e4-bd3d-6ba3a7fdaba1.png?v=1780804360"},{"product_id":"aluminium-brake-lever-guard-bremshebelschutz-132mm-fur-oe-lenker-ducati-panigale-v4-lightech-iss113ra","title":"LighTech Aluminium Brake Lever Guard 132mm for Ducati Panigale V4\/S\/R (2018–2024) OE Handlebar – ISS113RA","description":"\u003cp\u003eOn track, an unintended touch of the brake lever can end your race before it begins. The LighTech ISS113RA brake lever guard is a 132 mm CNC-machined aluminium shield engineered specifically for Ducati Panigale V4, V4 S and V4 R models from 2018 to 2024 running OE handlebars — giving riders at every level genuine protection against accidental brake actuation during close competition or fast road riding.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrevents accidental brake lever engagement during close-quarter racing contact — a genuine safety advantage on circuit and road alike\u003c\/li\u003e\n\u003cli\u003eCNC-machined from ultra-lightweight aluminium for strength without unnecessary mass\u003c\/li\u003e\n\u003cli\u003eAnodised surface finish with laser-engraved LighTech logo for a factory-quality appearance that lasts\u003c\/li\u003e\n\u003cli\u003eDesigned for right-hand fitment on OE handlebars at 132 mm length\u003c\/li\u003e\n\u003cli\u003eSupplied with matching adapter KPL319 — no separate purchase required for a straightforward bolt-on installation\u003c\/li\u003e\n\u003cli\u003eEnd cap available in your choice of anodised colour, also sold separately for further personalisation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eRacing-Bred Construction\u003c\/h2\u003e\u003cp\u003eLighTech has supplied the paddocks of WorldSBK and MotoGP support classes for decades, and the ISS113RA carries that racing lineage directly to the road and track rider. Every millimetre of the guard has been CNC-machined to tight tolerances, producing a component that is both lighter and more rigid than cast alternatives. The anodised finish resists abrasion and corrosion, while the laser-engraved logo confirms the part's provenance at a glance.\u003c\/p\u003e\u003ch3\u003eColoured End Cap Options\u003c\/h3\u003e\u003cp\u003eThe end cap — the visible tip of the guard — is available in seven anodised colours: black, silver, gold, orange, red, green and blue. Whether you are colour-matching to Ducati Panigale race livery or personalising a road build, the choice keeps the aesthetic entirely your own. End caps are also offered separately, so you can update the look at any time without replacing the full guard.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis brake lever guard fits the following models with OE (original equipment) handlebars:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale V4 — 2018, 2019, 2020, 2021, 2022, 2023, 2024\u003c\/li\u003e\n\u003cli\u003eDucati Panigale V4 S — 2018, 2019, 2020, 2021, 2022, 2023, 2024\u003c\/li\u003e\n\u003cli\u003eDucati Panigale V4 R — 2018, 2019, 2020, 2021, 2022, 2023, 2024\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAdapter KPL319 is included in the scope of delivery and is required for correct installation on these models.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: LighTech\u003c\/li\u003e\n\u003cli\u003ePart number: ISS113RA\u003c\/li\u003e\n\u003cli\u003eLength: 132 mm\u003c\/li\u003e\n\u003cli\u003eSide: right (brake lever)\u003c\/li\u003e\n\u003cli\u003eMaterial: CNC-machined aluminium\u003c\/li\u003e\n\u003cli\u003eSurface: anodised with laser-engraved logo\u003c\/li\u003e\n\u003cli\u003eIncluded adapter: KPL319\u003c\/li\u003e\n\u003cli\u003eFitment: Ducati Panigale V4 \/ V4 S \/ V4 R, 2018–2024, OE handlebar\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"with Adapter KPL319 \/ Black","offer_id":53168136945930,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with Adapter KPL319 \/ Silver","offer_id":53168136978698,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with Adapter KPL319 \/ Gold","offer_id":53168137011466,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with Adapter KPL319 \/ Orange","offer_id":53168137044234,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with Adapter KPL319 \/ Red","offer_id":53168137077002,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with Adapter KPL319 \/ Green","offer_id":53168137109770,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with Adapter KPL319 \/ Blue","offer_id":53168137142538,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ISS113RANER_5b53527f-e846-4fee-9fe2-f57ab5bf3c5b.png?v=1780804360"},{"product_id":"aluminium-brake-lever-guard-bremshebelschutz-148mm-fur-oe-lenker-honda-cbr-1000-rr-r-sc82-20-25-lightech-iss120ra","title":"LighTech Aluminium Brake Lever Guard 148mm for Honda CBR 1000 RR-R SC82 (2020-2026) – ISS120RA with Adapter KPL306","description":"\u003cp\u003eRiding the Honda CBR 1000 RR-R Fireblade SC82 to its limits demands hardware that keeps up — and keeps you safe. The LighTech ISS120RA brake lever guard wraps your brake lever in 148 mm of CNC-machined Italian aluminium, sitting precisely on the OE handlebar to prevent accidental lever actuation in close-quarters situations whether you are threading through track-day traffic or commuting through city streets.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDesigned specifically for the Honda CBR 1000 RR-R Fireblade SC82 (2020–2026) OE handlebar — no adaptation or measuring required\u003c\/li\u003e\n\u003cli\u003e148 mm CNC-machined aluminium construction delivers a rigid, lightweight shield without adding unnecessary bulk to the cockpit\u003c\/li\u003e\n\u003cli\u003eAnodised finish resists corrosion and wear, maintaining its appearance across seasons of road and track use\u003c\/li\u003e\n\u003cli\u003eLaser-engraved LighTech logo reflects the guard's Italian racing heritage and attention to detail\u003c\/li\u003e\n\u003cli\u003eAdapter KPL306 included in the box — bolt-on fitment with no additional purchases needed for the standard installation\u003c\/li\u003e\n\u003cli\u003eInterchangeable end cap accepts colour-matched alternatives (sold separately), letting you personalise the guard to your bike's livery\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuilt for Road and Track\u003c\/h2\u003e\u003cp\u003eThe ISS120RA is machined to exacting tolerances at LighTech's Italian facility, where CNC precision means every guard leaves the line within tight dimensional tolerances. The anodised surface treatment bonds to the aluminium at a molecular level, so it does not chip, flake or fade the way painted components can. The result is a component that looks as sharp after a full track season as it did on first fitment.\u003c\/p\u003e\u003cp\u003eThe 148 mm length is calibrated for the right-hand side of the CBR 1000 RR-R's OE bar, positioning the guard to deflect contact from other riders, barriers or obstacles before that force ever reaches the brake lever. In a moment of sudden contact, the difference between an untouched lever and an activated one is everything.\u003c\/p\u003e\u003ch2\u003ePersonalisation Without Compromise\u003c\/h2\u003e\u003cp\u003eThe guard is available in seven anodised colours — black, silver, gold, orange, red, green and blue — so you can match the guard to your bodywork, helmet or personal style without sacrificing any of its protective function. The optional interchangeable end cap takes personalisation a step further, and replacement caps are available separately through Inter-Pace.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThe LighTech ISS120RA is engineered specifically for the following model:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHonda CBR 1000 RR-R Fireblade SC82 — model years 2020, 2021, 2022, 2023, 2024, 2025 and 2026\u003c\/li\u003e\n\u003cli\u003eFits the standard OE handlebar; adapter KPL306 is included to ensure correct mounting\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: LighTech\u003c\/li\u003e\n\u003cli\u003ePart number: ISS120RA\u003c\/li\u003e\n\u003cli\u003eIncluded adapter: KPL306\u003c\/li\u003e\n\u003cli\u003eLength: 148 mm\u003c\/li\u003e\n\u003cli\u003eMaterial: CNC-machined aluminium, anodised\u003c\/li\u003e\n\u003cli\u003eSide: right (brake lever guard)\u003c\/li\u003e\n\u003cli\u003eOrigin: made in Italy\u003c\/li\u003e\n\u003cli\u003eFitment: Honda CBR 1000 RR-R SC82 (2020–2026), OE handlebar\u003c\/li\u003e\n\u003cli\u003eEnd cap: interchangeable, colour options sold separately\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"KPL306 \/ Black","offer_id":53168140091658,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL306 \/ Silver","offer_id":53168140124426,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL306 \/ Gold","offer_id":53168140157194,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL306 \/ Orange","offer_id":53168140189962,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL306 \/ Red","offer_id":53168140222730,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL306 \/ Green","offer_id":53168140255498,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL306 \/ Blue","offer_id":53168140288266,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ISS113RANER_bf7752b5-071c-4981-a0e1-a95e6d75956e.png?v=1780804386"},{"product_id":"aluminium-brake-lever-guard-bremshebelschutz-132mm-fur-oe-lenker-kawasaki-zx-4-rr-23-26-lightech-iss113ra","title":"LighTech Aluminium Brake Lever Guard 132mm – Kawasaki ZX-4 RR (2023–2026) ISS113RA","description":"\u003cp\u003eMachined from aerospace-grade aluminium and anodised for permanent corrosion resistance, the LighTech ISS113RA brake lever guard delivers genuine track-day protection with the kind of finish that belongs on a Kawasaki ZX-4 RR built to perform. At 132 mm, it covers the brake lever against unintended contact in tight cornering or chaotic pit-lane situations — without adding unnecessary mass to the front end.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCNC-machined aluminium construction — exceptionally light and resistant to impact and fatigue\u003c\/li\u003e\n\u003cli\u003eHard anodised finish provides lasting corrosion protection across all weather and track conditions\u003c\/li\u003e\n\u003cli\u003e132 mm guard length engineered for both spirited road riding and dedicated track days\u003c\/li\u003e\n\u003cli\u003eReliably prevents accidental brake lever activation from handlebar-to-handlebar contact or kerb strikes\u003c\/li\u003e\n\u003cli\u003eIncludes model-specific adapter KPL304 for a direct, rattle-free fit to the OE handlebar\u003c\/li\u003e\n\u003cli\u003eVehicle-specific design ensures clean, professional installation with no modification required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEngineering \u0026amp; Build Quality\u003c\/h2\u003e\u003cp\u003eLighTech's reputation is built on precision Italian manufacturing, and the ISS113RA is no exception. Each guard is CNC-milled from solid aluminium billet, leaving tight tolerances that eliminate any flex or rattle once mounted. The anodised surface treatment is applied after machining, penetrating the aluminium rather than sitting on top of it — meaning it will not chip, peel or fade under UV exposure or repeated cleaning. The result is a component that looks as purposeful as it is protective, available in seven anodised colour options to complement your ZX-4 RR's livery.\u003c\/p\u003e\u003ch2\u003eOn the Road \u0026amp; On Track\u003c\/h2\u003e\u003cp\u003eThe 132 mm lever guard is a widely accepted length for both road-registered motorcycles and track-day regulations, providing meaningful coverage without fouling gloves or restricting hand movement. For riders pushing the Kawasaki ZX-4 RR through tight chicanes or navigating crowded circuit pit lanes, the guard removes one genuine risk from the equation. Paired with a matching LighTech clutch lever guard and a set of LighTech adjustable levers, it forms part of a cohesive ergonomic and safety upgrade across the handlebar.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis brake lever guard is specifically designed for the Kawasaki ZX-4 RR across model years 2023 to 2026. The included adapter KPL304 interfaces directly with the original equipment handlebar on these models, meaning no drilling, welding or bespoke fabrication is needed. The optional adapter listed in the variant selector reflects whether the KPL304 adapter is included in the order.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: LighTech\u003c\/li\u003e\n\u003cli\u003ePart number: ISS113RA\u003c\/li\u003e\n\u003cli\u003eAdapter part number: KPL304\u003c\/li\u003e\n\u003cli\u003eGuard length: 132 mm\u003c\/li\u003e\n\u003cli\u003eMaterial: CNC-machined aluminium, anodised\u003c\/li\u003e\n\u003cli\u003eFitment: Kawasaki ZX-4 RR, 2023–2026, OE handlebar\u003c\/li\u003e\n\u003cli\u003eIntended use: Road and track\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"with Adapter KPL304 \/ Black","offer_id":53168147497226,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with Adapter KPL304 \/ Silver","offer_id":53168147529994,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with Adapter KPL304 \/ Gold","offer_id":53168147562762,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with Adapter KPL304 \/ Orange","offer_id":53168147595530,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with Adapter KPL304 \/ Red","offer_id":53168147628298,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with Adapter KPL304 \/ Green","offer_id":53168147661066,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with Adapter KPL304 \/ Blue","offer_id":53168147693834,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ISS113RANER_452fa5a1-ad35-4140-870e-fb103c5603f1.png?v=1780804505"},{"product_id":"aluminium-brake-lever-guard-bremshebelschutz-132mm-fur-oe-lenker-kawasaki-zx-6r-636-rr-03-25-lightech-iss113ra","title":"LighTech Aluminium Brake Lever Guard 132mm for Kawasaki ZX-6R \/ 636 \/ RR (2003–2026) – ISS113RA","description":"\u003cp\u003eLong days in the saddle or intense track sessions demand protection you can rely on without bulk getting in the way. The LighTech ISS113RA brake lever guard delivers exactly that — a precision CNC-milled aluminium guard measuring 132 mm that keeps your brake lever safe from accidental contact while sitting unobtrusively on your OE handlebar, exactly where comfort and control meet.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCNC-milled aluminium construction: rigid, ultralight, and built to absorb knocks without adding unnecessary mass to the controls\u003c\/li\u003e\n\u003cli\u003e132 mm compact length optimised for both road and track use, keeping the lever protected without intruding on rider comfort or reach\u003c\/li\u003e\n\u003cli\u003eSupplied complete with vehicle-specific adapter KPL304, ensuring a direct, rattle-free fit to the original handlebar of all ZX-6R, 636 and RR variants\u003c\/li\u003e\n\u003cli\u003ePrevents unintended brake lever actuation during overtakes, in traffic, or mid-corner — a genuine safety benefit on and off the circuit\u003c\/li\u003e\n\u003cli\u003eHigh-quality anodised finish available in seven colours, matching or contrasting your Kawasaki's livery with a factory-level look\u003c\/li\u003e\n\u003cli\u003ePairs with LighTech's matching clutch lever guard for a complete, cohesive racing setup\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Performance\u003c\/h2\u003e\u003cp\u003eLighTech manufacture the ISS113RA from billet aluminium using CNC machining, a process that delivers consistent wall thickness, tight tolerances, and a surface finish that takes anodising evenly. The result is a lever guard that feels substantial in the hand yet adds negligible weight to the handlebar assembly. The anodised coating is not merely cosmetic — it seals the aluminium against corrosion from rain, chain lube, and track spray, keeping the guard looking sharp across multiple seasons.\u003c\/p\u003e\u003cp\u003eThe 132 mm length has been chosen deliberately. It is long enough to shield the lever from the common causes of accidental engagement — passing vegetation, another rider's handlebar in a tight group, or a topple in the paddock — yet short enough that it never interferes with your natural wrist position or lever reach. Riders who have fine-tuned their lever position for all-day comfort will appreciate that the guard integrates around that existing ergonomic setup rather than disrupting it.\u003c\/p\u003e\u003ch2\u003eRoad and Track Use\u003c\/h2\u003e\u003cp\u003eOn the road the ISS113RA adds a discreet layer of safety that is easy to overlook until the moment it matters. At track days, where bikes are closer together and the risk of unintentional lever contact increases significantly, the guard earns its place in every session. Installation is straightforward: the included KPL304 adapter is machined specifically for the OE handlebar diameter of the Kawasaki ZX-6R, 636 and RR, so there is no drilling, no fabrication, and no guesswork — bolt it on and ride.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis lever guard is designed to fit the OE (original equipment) handlebar of the following Kawasaki models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKawasaki ZX-6R — model years 2003 to 2026\u003c\/li\u003e\n\u003cli\u003eKawasaki ZX-6R 636 — model years 2003 to 2026\u003c\/li\u003e\n\u003cli\u003eKawasaki ZX-6RR — model years 2003 to 2026\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe KPL304 adapter is included in the box. If you are running aftermarket clip-ons or a non-standard handlebar, please verify the bar diameter before ordering. An optional matching clutch lever guard is available separately to complete the setup.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: LighTech\u003c\/li\u003e\n\u003cli\u003ePart number: ISS113RA\u003c\/li\u003e\n\u003cli\u003eIncluded adapter: KPL304\u003c\/li\u003e\n\u003cli\u003eMaterial: CNC-milled aluminium, anodised\u003c\/li\u003e\n\u003cli\u003eGuard length: 132 mm\u003c\/li\u003e\n\u003cli\u003eFitment: OE handlebar, Kawasaki ZX-6R \/ 636 \/ RR (2003–2026)\u003c\/li\u003e\n\u003cli\u003eAvailable colours: black, silver, gold, orange, red, green, blue\u003c\/li\u003e\n\u003cli\u003eApplication: road and track\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"with Adapter KPL304 \/ Black","offer_id":53168148447498,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with Adapter KPL304 \/ Silver","offer_id":53168148480266,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with Adapter KPL304 \/ Gold","offer_id":53168148513034,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with Adapter KPL304 \/ Orange","offer_id":53168148545802,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with Adapter KPL304 \/ Red","offer_id":53168148578570,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with Adapter KPL304 \/ Green","offer_id":53168148611338,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with Adapter KPL304 \/ Blue","offer_id":53168148644106,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ISS113RANER_69c126df-7fde-4d0e-88c2-ada3487a6001.png?v=1780804519"},{"product_id":"aluminium-brake-lever-guard-bremshebelschutz-148mm-fur-oe-lenker-kawasaki-zx-4-rr-23-26-lightech-iss120ra","title":"LighTech Aluminium Brake Lever Guard 148mm for Kawasaki ZX-4 RR (2023–2026) OE Handlebar – ISS120RA + KPL304","description":"\u003cp\u003eEngineered for riders who demand all-day confidence on the street and lap-after-lap reliability on the track, the LighTech ISS120RA brake lever guard delivers a 148 mm shield of CNC-machined aluminium purpose-built for the Kawasaki ZX-4 RR. Supplied complete with the model-specific adapter KPL304, it fits the OE handlebar directly — no modification, no guesswork, just a secure and comfortable installation every time.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExtended 148 mm guard length offers generous coverage against accidental lever activation during close riding or in a get-off\u003c\/li\u003e\n\u003cli\u003eCNC-machined from high-grade aluminium for a precise fit, minimal weight and long-term durability\u003c\/li\u003e\n\u003cli\u003eIncludes dedicated adapter KPL304, ensuring a firm, rattle-free mount on the Kawasaki ZX-4 RR OE handlebar\u003c\/li\u003e\n\u003cli\u003eSleek racing profile that sits comfortably alongside your hand position without interfering with grip or control\u003c\/li\u003e\n\u003cli\u003eAvailable in seven anodised colours — black, silver, gold, orange, red, green and blue — to personalise your ZX-4 RR's cockpit\u003c\/li\u003e\n\u003cli\u003eEqually suited to track days, circuit racing and spirited road riding\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuilt for Precision and Comfort\u003c\/h2\u003e\u003cp\u003eLighTech machined the ISS120RA from solid aluminium billet, producing a guard that is both rigid enough to absorb impact and light enough that you will never notice it during a long riding day. The smooth, considered profile means your hand naturally settles into position without the guard creating pressure points or restricting lever travel — a detail that matters over hours in the saddle as much as it does at a circuit.\u003c\/p\u003e\u003ch2\u003eTrack-Ready Protection\u003c\/h2\u003e\u003cp\u003eOn a circuit, an unintended lever touch at speed can have serious consequences. The 148 mm guard creates a reliable barrier that prevents handlebar-to-handlebar contact, gravel, or debris from triggering the brake lever uninvited. The included KPL304 adapter is torqued and located correctly from the factory, so the guard stays exactly where it should regardless of the conditions.\u003c\/p\u003e\u003cp\u003eTip: Pair the ISS120RA with the LighTech aluminium clutch lever guard for a symmetrical, full racing cockpit look.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis kit is designed exclusively for the Kawasaki ZX-4 RR fitted with the original equipment handlebar, covering model years 2023 to 2026. The adapter KPL304 is included in the box — no additional hardware is required for a correct fit.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: LighTech\u003c\/li\u003e\n\u003cli\u003ePart number: ISS120RA\u003c\/li\u003e\n\u003cli\u003eAdapter: KPL304\u003c\/li\u003e\n\u003cli\u003eGuard length: 148 mm\u003c\/li\u003e\n\u003cli\u003eMaterial: CNC-machined aluminium\u003c\/li\u003e\n\u003cli\u003eFitment: Kawasaki ZX-4 RR (2023–2026), OE handlebar\u003c\/li\u003e\n\u003cli\u003eAvailable colours: black, silver, gold, orange, red, green, blue\u003c\/li\u003e\n\u003cli\u003eIntended use: road and track\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"KPL304 \/ Black","offer_id":53168149266698,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL304 \/ Silver","offer_id":53168149299466,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL304 \/ Gold","offer_id":53168149332234,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL304 \/ Orange","offer_id":53168149365002,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL304 \/ Red","offer_id":53168149397770,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL304 \/ Green","offer_id":53168149430538,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL304 \/ Blue","offer_id":53168149463306,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ISS113RANER_bbb034eb-4ab7-4d90-958e-900baa2e4c8f.png?v=1780804520"},{"product_id":"aluminium-brake-lever-guard-bremshebelschutz-132mm-fur-oe-lenker-kawasaki-zx-10-r-rr-11-26-lightech-iss113ra","title":"LighTech Aluminium Brake Lever Guard 132mm for Kawasaki ZX-10 R\/RR (2011-2026) – ISS113RA + Adapter KPL304","description":"\u003cp\u003eWhen fractions of a second and a single unexpected contact can end your race, the LighTech ISS113RA brake lever guard stands between your brake lever and disaster. CNC-machined from high-grade aluminium and finished with a durable anodised surface, this 132mm guard is engineered for the demands of track days, circuit racing, and spirited road riding on the Kawasaki ZX-10 R and ZX-10 RR.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCNC-machined aluminium construction — exceptional rigidity at minimal weight for a true race-quality fitment\u003c\/li\u003e\n\u003cli\u003e132mm guard length provides optimal coverage for both track and road use without compromising the compact, sporting profile of the ZX-10 R\/RR\u003c\/li\u003e\n\u003cli\u003eAnodised finish delivers a premium aesthetic and long-term protection against corrosion and surface wear\u003c\/li\u003e\n\u003cli\u003ePrevents unintended brake actuation caused by contact, a tight overtake, or a tip-over — critical on circuit and in traffic alike\u003c\/li\u003e\n\u003cli\u003eIncludes vehicle-specific adapter KPL304 for a direct, hassle-free installation onto the OE handlebar\u003c\/li\u003e\n\u003cli\u003eCompatible with the matching clutch lever guard for a clean, symmetrical racing setup\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTrack-Proven Protection\u003c\/h2\u003e\u003cp\u003eOn the ZX-10 R and ZX-10 RR, where rider inputs are precise and the margins are razor-thin, protecting the brake lever from accidental engagement is not optional — it is essential. The ISS113RA is built to the same standards that LighTech supplies to professional racing teams: tight CNC tolerances, lightweight aluminium billet, and a surface finish that holds up to the abuse of close-quarters circuit racing. Whether you are competing at club level or pushing hard on a trackday, this guard absorbs incidental contact before it reaches the lever.\u003c\/p\u003e\u003ch2\u003eRoad \u0026amp; Trackday Versatility\u003c\/h2\u003e\u003cp\u003eThe 132mm format strikes a considered balance between protection footprint and handlebar aesthetics. The anodised finish is available in multiple colours so the guard can integrate cleanly with your ZX-10 R livery rather than looking like an afterthought. On the road it provides the same protection against low-speed tip-overs and debris contact, making it a worthwhile upgrade for any rider who values both function and finish. Pair it with the LighTech clutch lever guard for a fully matched, symmetrical racing appearance.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis brake lever guard kit fits the following models with the included adapter KPL304:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKawasaki ZX-10 R — all variants, model years 2011 to 2026\u003c\/li\u003e\n\u003cli\u003eKawasaki ZX-10 RR — all variants, model years 2011 to 2026\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eInstallation is directly onto the OE (original equipment) handlebar using the supplied vehicle-specific adapter. No handlebar modifications are required.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eLighTech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eISS113RA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncluded adapter\u003c\/td\u003e\n\u003ctd\u003eKPL304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGuard length\u003c\/td\u003e\n\u003ctd\u003e132mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eCNC-machined aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurface finish\u003c\/td\u003e\n\u003ctd\u003eAnodised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eKawasaki ZX-10 R \/ ZX-10 RR (2011–2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHandlebar compatibility\u003c\/td\u003e\n\u003ctd\u003eOE (standard) handlebar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"LighTech","offers":[{"title":"with adapter KPL304 \/ Black","offer_id":53168149627146,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with adapter KPL304 \/ Silver","offer_id":53168149659914,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with adapter KPL304 \/ Gold","offer_id":53168149692682,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with adapter KPL304 \/ Orange","offer_id":53168149725450,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with adapter KPL304 \/ Red","offer_id":53168149758218,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with adapter KPL304 \/ Green","offer_id":53168149790986,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with adapter KPL304 \/ Blue","offer_id":53168149823754,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ISS113RANER_17fc1641-84c8-4944-8995-de53e5dc1de6.png?v=1780804526"},{"product_id":"aluminium-brake-lever-guard-bremshebelschutz-148mm-fur-oe-lenker-kawasaki-zx-10-r-rr-11-26-lightech-iss120ra","title":"LighTech Aluminium Brake Lever Guard 148mm for OE Handlebar – Kawasaki ZX-10R \/ ZX-10RR (2011–2026) ISS120RA + KPL304","description":"\u003cp\u003eRefined in the Italian CNC-machining tradition that defines LighTech's reputation, the ISS120RA brake lever guard pairs an extended 148 mm protection arc with a precision-anodised aluminium finish — delivering a piece that looks as purposeful in the pit lane as it performs on the road. Designed specifically for the Kawasaki ZX-10R and ZX-10RR on their OE handlebars, this is the lever guard for riders who refuse to compromise between aesthetics and genuine safety engineering.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExtended 148 mm guard length provides a generous protection surface, reducing the risk of accidental brake contact during close racing situations or tight overtakes.\u003c\/li\u003e\n\u003cli\u003eCNC-machined from high-grade aluminium — inherently lightweight and structurally rigid, adding negligible mass to the front end.\u003c\/li\u003e\n\u003cli\u003ePremium anodised finish resists corrosion and abrasion, maintaining its appearance through season after season of hard use.\u003c\/li\u003e\n\u003cli\u003eIncludes vehicle-specific adapter KPL304 for a direct, no-modification fitment onto the OE handlebar of the Kawasaki ZX-10R and ZX-10RR.\u003c\/li\u003e\n\u003cli\u003eAvailable in seven anodised colours — black, silver, gold, orange, red, green and blue — so the guard can be matched to the bike's livery or personalised to taste.\u003c\/li\u003e\n\u003cli\u003eTip: pairs naturally with a LighTech clutch lever guard to complete a cohesive, regulation-ready racing setup.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign, Finish and Heritage\u003c\/h2\u003e\u003cp\u003eLighTech has built its identity on marrying Italian design sensibility with motorsport-grade CNC precision. Every guard that leaves the facility is machined from solid aluminium billet and then anodised — not painted — so the colour is integral to the surface layer rather than a coating that chips or peels. The 148 mm body is the extended variant in the ISS range, chosen by riders who want the maximum guard coverage allowed without adding bulk or interfering with lever feel. The result is a component that looks factory-fitted rather than bolted-on.\u003c\/p\u003e\u003ch2\u003eOn Track and on the Road\u003c\/h2\u003e\u003cp\u003eWhether the ZX-10R is being lapped at a track day or hustled through mountain passes, the guard performs the same critical function: preventing an inadvertent press of the brake lever from an errant hand, a passing rival's elbow, or debris impact. The 148 mm span covers the full travel arc of the lever, while the low profile keeps the cockpit uncluttered. The KPL304 adapter is machined to the same tolerances as the guard itself, ensuring no play or vibration once torqued to specification.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis kit is confirmed for the following models with OE (standard) handlebars:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKawasaki ZX-10R — 2011 to 2026\u003c\/li\u003e\n\u003cli\u003eKawasaki ZX-10RR — 2011 to 2026\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAdapter KPL304 is included and is required for correct fitment to the OE handlebar. If aftermarket clip-ons or handlebars are fitted, verify compatibility before ordering.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eLighTech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eISS120RA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIncluded Adapter\u003c\/th\u003e\n\u003ctd\u003eKPL304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGuard Length\u003c\/th\u003e\n\u003ctd\u003e148 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eCNC-machined aluminium, anodised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment\u003c\/th\u003e\n\u003ctd\u003eKawasaki ZX-10R \/ ZX-10RR, 2011–2026, OE handlebar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAvailable Colours\u003c\/th\u003e\n\u003ctd\u003eBlack, Silver, Gold, Orange, Red, Green, Blue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntended Use\u003c\/th\u003e\n\u003ctd\u003eRoad and track\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"LighTech","offers":[{"title":"KPL304 \/ Black","offer_id":53168150642954,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL304 \/ Silver","offer_id":53168150675722,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL304 \/ Gold","offer_id":53168150708490,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL304 \/ Orange","offer_id":53168150741258,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL304 \/ Red","offer_id":53168150774026,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL304 \/ Green","offer_id":53168150806794,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL304 \/ Blue","offer_id":53168150839562,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ISS113RANER_497fb05f-3a0d-4fc0-97a7-19bed02968a3.png?v=1780804530"},{"product_id":"aluminium-brake-lever-guard-bremshebelschutz-148mm-fur-oe-lenker-triumph-daytona-675-r-07-12-lightech-iss120ra","title":"LighTech Aluminium Brake Lever Guard 148mm – Triumph Daytona 675\/R (2007–2012) ISS120RA with Adapter KPL302","description":"\u003cp\u003eEngineered for track days and racing, the LighTech ISS120RA brake lever guard delivers maximum protection for your Triumph Daytona 675\/R's brake lever — shielding it from unintentional contact during aggressive overtakes, close-quarter circuit racing, and high-speed straights where every component counts. Supplied complete with the dedicated adapter KPL302, this is a genuinely plug-and-play fitment for OE handlebars on all Daytona 675 and 675 R models from 2007 to 2012.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExtended 148mm guard length provides the largest possible coverage area — ideal for circuit riding where contact risk is highest.\u003c\/li\u003e\n\u003cli\u003eCNC-machined from high-grade aluminium for an outstanding strength-to-weight ratio that keeps unsprung and chassis mass in check.\u003c\/li\u003e\n\u003cli\u003ePremium anodised finish in your choice of seven colours — resists corrosion, track chemicals and UV fade while looking the part in the paddock.\u003c\/li\u003e\n\u003cli\u003eAdapter KPL302 included in the box — precision-matched to the OE handlebar of the Triumph Daytona 675\/R, so no sourcing of additional hardware is required.\u003c\/li\u003e\n\u003cli\u003eDesigned specifically for the Daytona 675 and 675 R (2007–2012), ensuring correct geometry and lever clearance straight out of the packaging.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuilt for the Circuit, Ready for the Road\u003c\/h2\u003e\u003cp\u003eLighTech's lever guards have become a staple in club racing and track-day paddocks across Europe, and the ISS120RA shows exactly why. The 148mm format is the longer of LighTech's two guard lengths, chosen by riders who prioritise protection over a minimal profile. Every guard is milled from solid aluminium billet on a CNC machining centre — tolerances are tight, the wall section is consistent throughout, and the anodised surface is applied after machining so it follows every contour cleanly. The result is a component that looks like it belongs on a factory race bike rather than an aftermarket add-on.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis kit is specifically configured for the Triumph Daytona 675 and Daytona 675 R produced between 2007 and 2012. The included adapter KPL302 bridges the LighTech guard to the original-specification handlebar on these models. No machining, no improvised spacers — mount it, torque it, ride. If your Daytona runs a different handlebar specification or clip-on, verify compatibility before ordering. A compact 132mm version of the guard is also available, and the ISS120RA can be paired with LighTech's clutch lever guard systems for full handlebar protection.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: LighTech\u003c\/li\u003e\n\u003cli\u003ePart number: ISS120RA\u003c\/li\u003e\n\u003cli\u003eIncluded adapter: KPL302\u003c\/li\u003e\n\u003cli\u003eGuard length: 148mm\u003c\/li\u003e\n\u003cli\u003eMaterial: CNC-machined aluminium, anodised finish\u003c\/li\u003e\n\u003cli\u003eFitment: Triumph Daytona 675 \/ Daytona 675 R, model years 2007–2012\u003c\/li\u003e\n\u003cli\u003eHandlebar compatibility: OE (original-equipment) handlebar\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"KPL302 \/ Black","offer_id":53168154018058,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL302 \/ Silver","offer_id":53168154050826,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL302 \/ Gold","offer_id":53168154083594,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL302 \/ Orange","offer_id":53168154116362,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL302 \/ Red","offer_id":53168154149130,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL302 \/ Green","offer_id":53168154181898,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL302 \/ Blue","offer_id":53168154214666,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ISS113RANER_3ef01809-6b91-4a39-83e9-a9fe96765d9e.png?v=1780804559"},{"product_id":"aluminium-brake-lever-guard-bremshebelschutz-132mm-fur-oe-lenker-triumph-daytona-675-r-07-12-lightech-iss113ra","title":"LighTech Aluminium Brake Lever Guard 132mm – Triumph Daytona 675\/R (2007–2012) ISS113RA","description":"\u003cp\u003eProtecting your brake lever from accidental engagement is a genuine safety priority, whether you are lapping a circuit on a trackday or navigating close traffic on the road. The LighTech ISS113RA brake lever guard is engineered specifically for the Triumph Daytona 675 and 675 R, delivering that protection in a CNC-machined aluminium package that adds almost nothing in weight or bulk.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e132 mm guard length offers meaningful brake lever protection without intruding on cockpit space, striking the ideal balance between safety and a clean racing aesthetic.\u003c\/li\u003e\n\u003cli\u003eCNC-machined from high-grade aluminium and finished with a precision anodised surface — resistant to corrosion and built to withstand the rigours of track and road use alike.\u003c\/li\u003e\n\u003cli\u003eVehicle-specific adapter KPL302 is included, enabling a direct, plug-and-play fit on the original OE handlebar of the Daytona 675 and 675 R — no modification required.\u003c\/li\u003e\n\u003cli\u003ePrevents accidental brake lever activation caused by contact with trackside furniture, other riders or street obstacles, reducing a recognised crash risk at source.\u003c\/li\u003e\n\u003cli\u003eAvailable in seven anodised colours, allowing the guard to complement your Daytona's livery without compromise.\u003c\/li\u003e\n\u003cli\u003eIdeal for trackday riders, club racers and road riders who demand an extra layer of active safety from their controls.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign and Construction\u003c\/h2\u003e\u003cp\u003eLighTech has built its reputation on precision CNC machining, and the ISS113RA reflects that fully. The guard body is milled from solid aluminium billet, producing a component that is both exceptionally light and torsionally rigid. At 132 mm the profile sits close to the lever without creating a handling obstruction, while the anodised finish — available in black, silver, gold, orange, red, green or blue — ensures the guard remains sharp-looking across thousands of kilometres of use.\u003c\/p\u003e\u003ch2\u003eSafety and Intended Use\u003c\/h2\u003e\u003cp\u003eAccidental brake actuation is a documented hazard in both circuit racing and everyday road riding. A lever guard acts as a physical barrier, stopping clothing, harness webbing, other riders' hands or track debris from depressing the lever unintentionally. The 132 mm ISS113RA is designed to meet that need on the Triumph Daytona 675 platform without requiring any permanent alteration to the motorcycle. Installation takes minutes using the supplied KPL302 adapter, which locates precisely on the stock handlebar end.\u003c\/p\u003e\u003cp\u003eFor riders who prefer a slightly longer guard profile, LighTech also offers a 148 mm version of the same guard. The ISS113RA can equally be paired with a LighTech clutch lever guard for a fully matched safety setup on both sides of the bar.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis brake lever guard is designed and confirmed to fit the following motorcycles with the original equipment handlebar, using the included KPL302 adapter:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTriumph Daytona 675 — 2007, 2008, 2009, 2010, 2011, 2012\u003c\/li\u003e\n\u003cli\u003eTriumph Daytona 675 R — 2007, 2008, 2009, 2010, 2011, 2012\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFitment is to the OE handlebar only. Aftermarket handlebars or clip-ons may require a different adapter; consult the LighTech adapter range for alternative configurations.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart number: ISS113RA (guard) + KPL302 (adapter)\u003c\/li\u003e\n\u003cli\u003eBrand: LighTech\u003c\/li\u003e\n\u003cli\u003eGuard length: 132 mm\u003c\/li\u003e\n\u003cli\u003eMaterial: CNC-machined aluminium, anodised finish\u003c\/li\u003e\n\u003cli\u003eFitment: Triumph Daytona 675 \/ 675 R, 2007–2012 (OE handlebar)\u003c\/li\u003e\n\u003cli\u003eIncluded adapter: KPL302\u003c\/li\u003e\n\u003cli\u003eAvailable colours: black, silver, gold, orange, red, green, blue\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"with adapter KPL302 \/ Black","offer_id":53168154444042,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with adapter KPL302 \/ Silver","offer_id":53168154476810,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with adapter KPL302 \/ Gold","offer_id":53168154509578,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with adapter KPL302 \/ Orange","offer_id":53168154542346,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with adapter KPL302 \/ Red","offer_id":53168154575114,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with adapter KPL302 \/ Green","offer_id":53168154607882,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with adapter KPL302 \/ Blue","offer_id":53168154640650,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ISS113RANER_78f3faf7-736c-48ff-bcc3-7e1565c85dab.png?v=1780804560"},{"product_id":"aluminium-brake-lever-guard-bremshebelschutz-132mm-fur-oe-lenker-yamaha-yzf-r6-06-26-lightech-iss113ra","title":"LighTech Aluminium Brake Lever Guard 132mm for OE Handlebar – Yamaha YZF-R6 (2006–2026) ISS113RA","description":"\u003cp\u003eRider safety begins at the lever. The LighTech ISS113RA Aluminium Brake Lever Guard is purpose-built to protect your brake lever on the Yamaha YZF-R6 in the moments that matter most — tight overtakes, track day incidents, and low-speed tip-overs where an unguarded lever can mean the difference between riding home and walking.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e132 mm compact guard length delivers meaningful protection without adding bulk to your YZF-R6's cockpit\u003c\/li\u003e\n\u003cli\u003eCNC-machined aluminium construction combines minimum weight with maximum structural rigidity\u003c\/li\u003e\n\u003cli\u003eAnodised surface finish provides lasting corrosion resistance and a premium, factory-quality appearance\u003c\/li\u003e\n\u003cli\u003eIncludes Adapter KPL311 for direct, plug-and-play fitment on the OE handlebar — no modifications required\u003c\/li\u003e\n\u003cli\u003eEqually at home on road, trackday and full race setups\u003c\/li\u003e\n\u003cli\u003eAvailable in seven anodised colours to complement your R6's livery\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuilt to Protect, Finished to Impress\u003c\/h2\u003e\u003cp\u003eLighTech has earned its reputation among riders who refuse to compromise. The ISS113RA is machined from high-grade aluminium billet on precision CNC equipment, then anodised for a durable finish that holds its colour under UV exposure and repeated cleaning. At 132 mm the guard sits in the ideal zone between maximum coverage and a clean, uncluttered bar setup — no snagging on bodywork, no interference with normal lever pull.\u003c\/p\u003e\u003ch2\u003ePlug-and-Play Installation\u003c\/h2\u003e\u003cp\u003eThe supplied Adapter KPL311 is machined to the exact specifications of the Yamaha YZF-R6's OE handlebar. Installation is straightforward: mount the adapter, slide on the guard, torque to spec. There is no need to source additional hardware or modify your stock bars. Whether you are preparing for a Sunday track session or simply want added confidence on fast road rides, the ISS113RA is ready to bolt straight on.\u003c\/p\u003e\u003cp\u003eAlso available in a 148 mm extended version for riders who want additional reach, and can be paired with a LighTech clutch lever guard for a fully matched, symmetrical cockpit.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis lever guard and adapter combination fits the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eYamaha YZF-R6 — all variants, model years 2006 to 2026\u003c\/li\u003e\n\u003cli\u003eFitment is for OE (standard) handlebars using Adapter KPL311 (included)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eLighTech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eISS113RA (guard) + KPL311 (adapter)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGuard Length\u003c\/td\u003e\n\u003ctd\u003e132 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eCNC-machined aluminium, anodised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eYamaha YZF-R6 (2006–2026), OE handlebar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdapter Included\u003c\/td\u003e\n\u003ctd\u003eKPL311\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailable Colours\u003c\/td\u003e\n\u003ctd\u003eBlack, Silver, Gold, Orange, Red, Green, Blue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntended Use\u003c\/td\u003e\n\u003ctd\u003eRoad, trackday, racing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"LighTech","offers":[{"title":"with Adapter KPL311 \/ Black","offer_id":53168157819146,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with Adapter KPL311 \/ Silver","offer_id":53168157851914,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with Adapter KPL311 \/ Gold","offer_id":53168157884682,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with Adapter KPL311 \/ Orange","offer_id":53168157917450,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with Adapter KPL311 \/ Red","offer_id":53168157950218,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with Adapter KPL311 \/ Green","offer_id":53168157982986,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with Adapter KPL311 \/ Blue","offer_id":53168158015754,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ISS113RANER_1fc2b56f-a970-4567-9a2c-3e85abb0e7b2.png?v=1780804585"},{"product_id":"aluminium-brake-lever-guard-bremshebelschutz-148mm-fur-oe-lenker-yamaha-yzf-r6-06-26-lightech-iss120ra","title":"LighTech Aluminium Brake Lever Guard 148mm for Yamaha YZF-R6 (2006–2026) – ISS120RA with Adapter KPL311","description":"\u003cp\u003eWhen lap times matter and every detail counts, the LighTech ISS120RA brake lever guard delivers race-grade protection without compromise. Machined from CNC-milled aluminium and finished with a precision anodised surface, this 148mm guard shields the brake lever of your Yamaha YZF-R6 from accidental contact — a critical safeguard on track days and in race paddocks where a stray hand or barrier contact can end your session instantly.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExtended 148mm length provides a larger protected zone than the shorter 132mm variant, giving maximum lever coverage in race and track conditions.\u003c\/li\u003e\n\u003cli\u003eCNC-milled aluminium construction keeps weight to an absolute minimum while delivering the rigidity demanded by serious track riders.\u003c\/li\u003e\n\u003cli\u003eAnodised finish resists corrosion and retains its racing aesthetic through sustained track use and adverse weather exposure.\u003c\/li\u003e\n\u003cli\u003eIncludes adapter KPL311, enabling direct, no-modification fitment to the original equipment handlebar on the Yamaha YZF-R6 from 2006 through 2026.\u003c\/li\u003e\n\u003cli\u003eAvailable in seven anodised colours — black, silver, gold, orange, red, green, and blue — allowing a precise match to your R6's livery or team colours.\u003c\/li\u003e\n\u003cli\u003ePairs with LighTech's corresponding clutch lever guard for a fully co-ordinated, professional-grade cockpit setup.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuilt for the Track, Ready for the Road\u003c\/h2\u003e\u003cp\u003eLighTech engineered the ISS120RA as a direct response to the demands of circuit racing. The 148mm guard length is deliberately extended compared to the standard 132mm option, maximising the protected arc around the lever blade so that even the most aggressive kerb strikes or close-quarters paddock manoeuvres cannot reach the lever itself. The CNC-milling process removes every gramme of excess material while preserving structural integrity — the result is a guard that adds meaningful protection with negligible mass penalty.\u003c\/p\u003e\u003cp\u003eThe anodised surface is not merely decorative. It forms a hard oxide layer integral to the aluminium itself, giving the guard genuine corrosion resistance across a full racing season in all conditions. The finish is consistent in colour from every angle, producing the clean, purposeful appearance that distinguishes proper Italian race accessories from budget alternatives.\u003c\/p\u003e\u003ch2\u003ePlug-and-Play Installation\u003c\/h2\u003e\u003cp\u003eAdapter KPL311 is included in the box specifically to mate the ISS120RA to the standard handlebar clamp of the Yamaha YZF-R6 across its entire 2006–2026 production span. No drilling, no fabrication, and no modification to the original handlebar is required. The complete assembly uses existing mounting points, keeping installation time short and preserving the integrity of the OEM components underneath.\u003c\/p\u003e\u003cp\u003eFor a symmetrical cockpit, the guard can also be teamed with LighTech's clutch lever guard on the left bar. If the 148mm reach of the ISS120RA is more than your setup requires, the shorter 132mm version is also available.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eYamaha YZF-R6 — all variants, 2006 to 2026\u003c\/li\u003e\n\u003cli\u003eFits OE (original equipment) handlebar via included adapter KPL311\u003c\/li\u003e\n\u003cli\u003eNo handlebar modification required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eLighTech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eISS120RA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncluded adapter\u003c\/td\u003e\n\u003ctd\u003eKPL311\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGuard length\u003c\/td\u003e\n\u003ctd\u003e148 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eCNC-milled aluminium, anodised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eYamaha YZF-R6, 2006–2026 (OE handlebar)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailable colours\u003c\/td\u003e\n\u003ctd\u003eBlack, Silver, Gold, Orange, Red, Green, Blue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntended use\u003c\/td\u003e\n\u003ctd\u003eTrack, race, road\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"LighTech","offers":[{"title":"KPL311 \/ Black","offer_id":53168158146826,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL311 \/ Silver","offer_id":53168158179594,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL311 \/ Gold","offer_id":53168158212362,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL311 \/ Orange","offer_id":53168158245130,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL311 \/ Red","offer_id":53168158277898,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL311 \/ Green","offer_id":53168158310666,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL311 \/ Blue","offer_id":53168158343434,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ISS113RANER_51459e26-fb4f-4060-b5ba-2fd514a75f9e.png?v=1780804590"},{"product_id":"aluminium-brake-lever-guard-bremshebelschutz-132mm-fur-oe-lenker-yamaha-yzf-r7-21-26-lightech-iss113ra","title":"LighTech Aluminium Brake Lever Guard 132mm for OE Handlebar – Yamaha YZF-R7 (2021–2026) ISS113RA","description":"\u003cp\u003eThe LighTech ISS113RA brake lever guard brings Italian racing pedigree to the Yamaha YZF-R7 in a precisely CNC-machined aluminium profile finished with a hard anodised surface that holds its character lap after lap. At 132 mm, this is the compact guard engineered specifically around the OE handlebar geometry of the YZF-R7 across every model year from 2021 to 2026 — a fitment-first design that looks as purposeful as it performs.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e132 mm compact racing profile machined from high-grade CNC aluminium for an uncompromising strength-to-weight ratio\u003c\/li\u003e\n\u003cli\u003eHard anodised finish resists corrosion, scratches and UV fade while delivering a clean, premium appearance in your chosen colour\u003c\/li\u003e\n\u003cli\u003eDesigned exclusively for the OE handlebar of the Yamaha YZF-R7 (2021–2026) — no guesswork, no modification required\u003c\/li\u003e\n\u003cli\u003eIncludes adapter KPL311 for a precise, plug-and-play installation directly onto the stock bar end\u003c\/li\u003e\n\u003cli\u003eShields the brake lever from unintended contact during slides, kerb strikes and close-quarters track situations\u003c\/li\u003e\n\u003cli\u003eAvailable in seven anodised colours to complement your YZF-R7 livery and personal style\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign, Finish and Heritage\u003c\/h2\u003e\u003cp\u003eLighTech has been manufacturing precision aluminium controls and protection components in Italy for decades, and the ISS113RA carries that lineage forward. Every guard is machined from solid billet aluminium on CNC equipment, producing surfaces that need no filler or paint — the anodised colour penetrates the material itself, giving a finish that ages gracefully rather than peeling or flaking. The seven available colours — black, silver, gold, orange, red, green and blue — each carry the same depth and consistency, whether you choose a subtle match to the YZF-R7's Midnight Black or a bold contrast in competition gold.\u003c\/p\u003e\u003cp\u003eThe 132 mm length is not arbitrary. LighTech sized this guard specifically for the OE handlebar crow of the YZF-R7, keeping it clear of the lever throw arc while offering maximum coverage without crowding the cockpit. The result is a component that integrates visually and mechanically as though it left the factory that way.\u003c\/p\u003e\u003ch2\u003eRoad, Trackday and Circuit Use\u003c\/h2\u003e\u003cp\u003eWhether you are running the YZF-R7 on weekend canyon roads, a track evening, or a club race, the lever guard addresses a genuine risk: an errant slide or a tap from a rival can fold an unprotected brake lever and end a session — or worse. The ISS113RA sits between your lever and that scenario without adding meaningful weight or bulk to the cockpit. Adapter KPL311 is included and locates directly on the OE bar end thread, so the installation is clean, reversible and takes only minutes. No drilling, no welding, no compromise to the standard ergonomics.\u003c\/p\u003e\u003cp\u003eFor a complete protection setup, LighTech also produce a 148 mm variant of this guard and a matching clutch lever guard — both using the same CNC and anodising process for a consistent finish across the handlebar.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis lever guard is developed for the following application:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eYamaha YZF-R7 — model years 2021, 2022, 2023, 2024, 2025 and 2026\u003c\/li\u003e\n\u003cli\u003eFits the OE (original equipment) handlebar only — adapter KPL311 included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eLighTech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eISS113RA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncluded adapter\u003c\/td\u003e\n\u003ctd\u003eKPL311\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGuard length\u003c\/td\u003e\n\u003ctd\u003e132 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eCNC-machined aluminium, anodised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eYamaha YZF-R7 (2021–2026), OE handlebar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailable colours\u003c\/td\u003e\n\u003ctd\u003eBlack, Silver, Gold, Orange, Red, Green, Blue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003ePlug-and-play, no modification required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"LighTech","offers":[{"title":"with Adapter KPL311 \/ Black","offer_id":53168158376202,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with Adapter KPL311 \/ Silver","offer_id":53168158408970,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with Adapter KPL311 \/ Gold","offer_id":53168158441738,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with Adapter KPL311 \/ Orange","offer_id":53168158474506,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with Adapter KPL311 \/ Red","offer_id":53168158507274,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with Adapter KPL311 \/ Green","offer_id":53168158540042,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"with Adapter KPL311 \/ Blue","offer_id":53168158572810,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ISS113RANER_cefbad6b-c507-4acb-9344-f1782c980249.png?v=1780804593"},{"product_id":"aluminium-brake-lever-guard-bremshebelschutz-148mm-fur-oe-lenker-yamaha-yzf-r7-21-26-lightech-iss120ra","title":"LighTech Aluminium Brake Lever Guard 148mm for OE Handlebar – Yamaha YZF-R7 (2021–2026) ISS120RA + KPL311","description":"\u003cp\u003eProtecting your brake lever costs nothing in performance but can save a great deal in damage — the LighTech ISS120RA brake lever guard delivers 148 mm of CNC-machined aluminium coverage purpose-built for the stock handlebar of the Yamaha YZF-R7 (2021–2026), giving daily commuters and track-day riders alike a practical, good-looking upgrade that installs without modification.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e148 mm guard length provides generous coverage for both road and circuit riding conditions\u003c\/li\u003e\n\u003cli\u003eCNC-machined aluminium construction combines exceptional rigidity with minimal added mass\u003c\/li\u003e\n\u003cli\u003eAnodised finish resists corrosion and weathering while lending a clean, race-inspired appearance\u003c\/li\u003e\n\u003cli\u003eIncludes dedicated adapter KPL311 for direct, vehicle-specific fitment to the OE handlebar — no drilling or fabrication required\u003c\/li\u003e\n\u003cli\u003eAvailable in seven anodised colours so the guard can complement or contrast your R7's livery\u003c\/li\u003e\n\u003cli\u003eCompatible with the full model run of the YZF-R7 from 2021 through 2026\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePractical Protection for Every Ride\u003c\/h2\u003e\u003cp\u003eWhether you are navigating city traffic or pushing through a track-day session, a lever guard is one of those small investments that pays off the moment something goes wrong. The 148 mm length of the ISS120RA offers a noticeably larger protected zone than shorter alternatives, reducing the risk of accidental lever engagement from a topple in the paddock or a glancing impact on the road. The anodised aluminium surface keeps its appearance through all weathers without the peeling or fading that plagues painted finishes.\u003c\/p\u003e\u003ch2\u003eStraightforward Installation\u003c\/h2\u003e\u003cp\u003eLighTech includes the correct adapter — part number KPL311 — in the box, so the lever guard simply bolts onto the Yamaha YZF-R7's original handlebar. There is no need to source additional hardware or modify any existing components. The plug-and-play approach means fitting takes minutes rather than hours, and the guard can be swapped between colour options just as easily if your preference changes.\u003c\/p\u003e\u003cp\u003eFor a complete matched setup, this guard pairs with the LighTech clutch lever guard. A shorter 132 mm version of the brake lever guard is also available if clearance is a consideration.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eDesigned and supplied with adapter KPL311 specifically for the OE handlebar of the Yamaha YZF-R7, covering all model years 2021 to 2026.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: LighTech\u003c\/li\u003e\n\u003cli\u003ePart number: ISS120RA\u003c\/li\u003e\n\u003cli\u003eIncluded adapter: KPL311\u003c\/li\u003e\n\u003cli\u003eGuard length: 148 mm\u003c\/li\u003e\n\u003cli\u003eMaterial: CNC-machined aluminium, anodised\u003c\/li\u003e\n\u003cli\u003eFitment: Yamaha YZF-R7 (2021–2026), OE handlebar\u003c\/li\u003e\n\u003cli\u003eApplication: road, track day, racing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"KPL311 \/ Black","offer_id":53168159785226,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL311 \/ Silver","offer_id":53168159817994,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL311 \/ Gold","offer_id":53168159850762,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL311 \/ Orange","offer_id":53168159883530,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL311 \/ Red","offer_id":53168159916298,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL311 \/ Green","offer_id":53168159949066,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL311 \/ Blue","offer_id":53168159981834,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ISS113RANER_2c46b07b-6729-4b9b-a6a5-a014e61548d4.png?v=1780804599"},{"product_id":"aluminium-brake-lever-guard-bremshebelschutz-148mm-fur-oe-lenker-yamaha-yzf-r1-m-12-26-lightech-iss120ra","title":"LighTech Aluminium Brake Lever Guard 148mm for OE Handlebar – Yamaha YZF-R1\/R1M (2012–2026) ISS120RA + KPL311","description":"\u003cp\u003eDesigned for riders who spend long hours in the saddle on both road and track, the LighTech ISS120RA brake lever guard delivers confident, all-day protection without adding unnecessary bulk or weight to your Yamaha YZF-R1 or R1M. At 148 mm in length, it offers a generous protective surface that keeps the brake lever shielded from accidental activation — whether you are navigating tight traffic or pushing hard on a trackday.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e148 mm guard length provides maximum coverage, reducing the risk of unintended brake actuation in close-contact situations on road or circuit.\u003c\/li\u003e\n\u003cli\u003eCNC-machined from high-grade aluminium for an exceptional strength-to-weight ratio that suits both commuting and competition use.\u003c\/li\u003e\n\u003cli\u003eAnodised finish resists corrosion and maintains a clean, purposeful aesthetic across extended daily use.\u003c\/li\u003e\n\u003cli\u003eIncludes dedicated adapter KPL311 for a precise, no-modification fit on the OE handlebar of the Yamaha YZF-R1 and R1M.\u003c\/li\u003e\n\u003cli\u003ePlug-and-play installation — no drilling, no cutting, no compromise to the stock setup.\u003c\/li\u003e\n\u003cli\u003eAvailable in seven anodised colours so the guard integrates seamlessly with your machine's livery.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Comfort Over Distance\u003c\/h2\u003e\u003cp\u003eThe ISS120RA is CNC-machined from solid aluminium billet, a process that eliminates weak points and keeps the finished part light enough that you will never notice it is there — until it does its job. The anodised surface layer bonds at a molecular level with the aluminium substrate, meaning it will not chip, peel or fade over seasons of commuting and weekend track outings. The guard's geometry is shaped to sit flush alongside the lever without intruding on your natural hand position, so ergonomics and all-day comfort are preserved exactly as Yamaha intended.\u003c\/p\u003e\u003ch2\u003eRoad, Trackday and Racing Use\u003c\/h2\u003e\u003cp\u003eOn the street, the lever guard protects against the nudge of a passing vehicle, an errant jacket sleeve or any other everyday hazard that could trigger an unintended stop. At the track, where bikes and riders run in close formation, it adds a layer of safety that complements your protective gear. The 148 mm format is the longer of LighTech's two available lengths and is the preferred choice wherever maximum protection matters most. A matching clutch lever guard is available separately to complete the setup, and the 132 mm variant of the ISS120RA suits riders who prefer a more compact profile.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis kit is supplied with adapter KPL311, which is engineered specifically for the original equipment handlebar fitted to the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eYamaha YZF-R1 — model years 2012 to 2026\u003c\/li\u003e\n\u003cli\u003eYamaha YZF-R1M — model years 2012 to 2026\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNo modifications to the handlebar or brake lever assembly are required. If you are fitting to an aftermarket bar, please verify clamp diameter and bar-end thread compatibility before ordering.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eLighTech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eISS120RA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncluded adapter\u003c\/td\u003e\n\u003ctd\u003eKPL311\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGuard length\u003c\/td\u003e\n\u003ctd\u003e148 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eCNC-machined aluminium, anodised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eYamaha YZF-R1 \/ R1M (2012–2026), OE handlebar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntended use\u003c\/td\u003e\n\u003ctd\u003eRoad, trackday and racing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"LighTech","offers":[{"title":"KPL311 \/ Black","offer_id":53168160801034,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL311 \/ Silver","offer_id":53168160833802,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL311 \/ Gold","offer_id":53168160866570,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL311 \/ Orange","offer_id":53168160899338,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL311 \/ Red","offer_id":53168160932106,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL311 \/ Green","offer_id":53168160964874,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true},{"title":"KPL311 \/ Blue","offer_id":53168160997642,"sku":null,"price":159.36,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ISS113RANER_c0618318-9a2d-4436-ad07-b4ff20e25cec.png?v=1780804611"},{"product_id":"spider-20-d164","title":"Spider Racing Aluminium Engine Case Cover for Ducati Panigale V4 \/ V4S (2025-2026) – Part 20.D164","description":"\u003cp\u003eProtecting your Panigale V4's engine casings does not have to mean adding bulk or compromising the bike's character. The Spider Racing aluminium engine case cover for the Ducati Panigale V4 and V4S (model years 2025-2026) is a practical, everyday upgrade that guards one of the most vulnerable areas of your motor without altering the riding feel you bought the bike for. CNC-machined in Italy from high-strength aluminium alloy and finished in a clean black anodised coat, it slots directly onto the engine casing with factory-style precision and stays there — whether you are clocking up Sunday road miles or committing to a track day.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrecise fitment for Ducati Panigale V4 and V4S, model years 2025 and 2026 — no modification required\u003c\/li\u003e\n\u003cli\u003eCNC-machined from high-strength aluminium alloy for a rigid, reliable shield against impact damage\u003c\/li\u003e\n\u003cli\u003eBlack anodised finish resists corrosion and maintains a purposeful, understated look over time\u003c\/li\u003e\n\u003cli\u003eNegligible weight addition keeps the Panigale's handling balance completely intact\u003c\/li\u003e\n\u003cli\u003eManufactured in Italy by Spider Racing, drawing on genuine motorsport engineering experience\u003c\/li\u003e\n\u003cli\u003eSupplied complete with all necessary mounting hardware for a straightforward installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEngineered for Real-World Use\u003c\/h2\u003e\u003cp\u003eKerb strikes, gravel flicks, and the occasional low-side are realities of riding a high-performance machine. The Spider Racing cover sits flush against the engine casing exactly where the casings are most exposed, absorbing and distributing impact energy before it reaches the alloy beneath. Because it is machined rather than cast, the wall thickness is consistent throughout, giving you confidence in its protective ability without the penalty of unnecessary mass.\u003c\/p\u003e\u003cp\u003eThe black anodised surface treatment does more than look good. Anodising creates a hard, integrated oxide layer rather than a surface coating that can peel or flake — meaning the cover will still look the part after seasons of use in varying conditions. It is equally at home on a bike kept for daily sport riding as it is on one prepped specifically for circuit sessions.\u003c\/p\u003e\u003ch2\u003eTrack Day and Road Versatility\u003c\/h2\u003e\u003cp\u003eThis cover suits riders who want preventive protection in place before they need it. For track day use it offers obvious peace of mind should contact with the tarmac occur. On the road its value is quieter but just as real — a single low-speed drop in a car park can crack an unprotected engine casing and turn a minor incident into an expensive rebuild. Fitting the Spider Racing cover at purchase is straightforward insurance against that kind of disruption.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis engine case cover is designed exclusively for the following:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale V4 — model years 2025 and 2026\u003c\/li\u003e\n\u003cli\u003eDucati Panigale V4S — model years 2025 and 2026\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease verify your model year before ordering. This part is not compatible with earlier Panigale V4 generations without modification.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eSpider Racing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003e20.D164\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eHigh-strength aluminium alloy, CNC-machined\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack anodised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of manufacture\u003c\/td\u003e\n\u003ctd\u003eItaly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eDucati Panigale V4 \/ V4S (2025-2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncluded hardware\u003c\/td\u003e\n\u003ctd\u003eAll mounting bolts and fitting materials included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Spider Racing","offers":[{"title":"Kit (20.D164)","offer_id":53168176660746,"sku":"20.D164","price":321.17,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/SpiderV4Deckel_65dec95f-d450-4c2f-9dfb-b1c9a3c5d261.png?v=1780804749"},{"product_id":"lightech-gctbm001","title":"LighTech Transparent Clutch Cover BMW S1000RR K67 (2019-2026) GCTBM001","description":"\u003cp\u003eEngineered to the exacting standards that define LighTech's racing pedigree, this transparent clutch cover for the BMW S1000RR K67 (2019–2026) delivers a direct view of the clutch mechanism without compromising protection — a genuine upgrade for riders who demand both function and form on road and track alike.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCNC-machined aluminium construction offers a precision fit, exceptional rigidity and long-term durability under sustained mechanical stress.\u003c\/li\u003e\n\u003cli\u003eOil-resistant, impact-resistant and heat-stable Lexan window gives a clear view of the clutch internals at all times.\u003c\/li\u003e\n\u003cli\u003eWeather- and UV-resistant materials withstand prolonged sun exposure, rain and demanding track conditions without degrading.\u003c\/li\u003e\n\u003cli\u003eAnodised finish available in four colours — each variant carries its own part number for accurate ordering: Black (GCTBM001NER), Gold (GCTBM001ORO), Red (GCTBM001ROS) and Cobalt (GCTBM001COB).\u003c\/li\u003e\n\u003cli\u003ePlug-and-play fitment designed specifically for the BMW S1000RR K67 — no modification required.\u003c\/li\u003e\n\u003cli\u003eCompatible with the LighTech clutch pressure plate GCTBM002 for a complete, race-ready aesthetic.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Performance\u003c\/h2\u003e\u003cp\u003eLighTech manufactures this clutch cover from high-grade aluminium using multi-axis CNC machining, ensuring the tolerances required for a leak-free seal against the engine casing. The Lexan window is the same material trusted in aerospace and motorsport applications: it resists cracking under impact, repels oil contamination and retains optical clarity even after prolonged heat cycling. The anodised surface treatment bonds at the molecular level, so the colour will not chip or peel under track conditions that would strip lesser coatings.\u003c\/p\u003e\u003ch2\u003eRoad and Track Suitability\u003c\/h2\u003e\u003cp\u003eBecause the cover is engineered to OEM-equivalent standards of sealing and material integrity, it is equally at home on the road and in a pit lane environment. Riders who participate in track days will appreciate the thermal stability of the Lexan panel when the engine is running at sustained high temperatures. The visual access to the clutch pack also offers a practical diagnostic benefit — any fluid contamination or abnormal wear can be spotted during a routine check without removing the cover entirely.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eBMW S1000RR K67 (2019–2026)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThe cover is a direct, plug-and-play replacement. No drilling, no machining and no adapter plates are required. Pair with LighTech part GCTBM002 (clutch pressure plate) for a fully coordinated LighTech drivetrain appearance.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eLighTech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number (base)\u003c\/td\u003e\n\u003ctd\u003eGCTBM001\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number — Black\u003c\/td\u003e\n\u003ctd\u003eGCTBM001NER\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number — Gold\u003c\/td\u003e\n\u003ctd\u003eGCTBM001ORO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number — Red\u003c\/td\u003e\n\u003ctd\u003eGCTBM001ROS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number — Cobalt\u003c\/td\u003e\n\u003ctd\u003eGCTBM001COB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial (frame)\u003c\/td\u003e\n\u003ctd\u003eCNC-machined aluminium, anodised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWindow material\u003c\/td\u003e\n\u003ctd\u003eLexan (oil-resistant, impact-resistant, heat-stable, UV-resistant)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eBMW S1000RR K67 (2019–2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible accessory\u003c\/td\u003e\n\u003ctd\u003eLighTech clutch pressure plate GCTBM002\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003ePlug and play — no modification required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"LighTech","offers":[{"title":"Black","offer_id":53168212377866,"sku":"GCTBM001NER","price":807.53,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":53168212410634,"sku":"GCTBM001ROS","price":807.53,"currency_code":"EUR","in_stock":true},{"title":"Gold","offer_id":53168212443402,"sku":"GCTBM001ORO","price":807.53,"currency_code":"EUR","in_stock":true},{"title":"Cobalt Blue","offer_id":53168212476170,"sku":"GCTBM001COB","price":807.53,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/GCTBM001NER.png?v=1780808482"},{"product_id":"transparenter-kupplungsdeckel-troy-bayliss-limited-edition-cnc-racing-ducati-panigale-v4-s-2025-ca210tb","title":"CNC Racing Transparent Clutch Cover Troy Bayliss Limited Edition Ducati Panigale V4\/S (2025-2026) CA210TB","description":"\u003cp\u003eEvery ride on the Ducati Panigale V4 or V4 S deserves hardware that works as hard as it looks. The CNC Racing CA210TB transparent clutch cover in the Troy Bayliss Limited Edition brings genuine race-derived engineering to your 2025-2026 Panigale, exposing the oil-bath clutch through a Lexan window while keeping everything sealed, lightweight and road-ready from the very first kilometre.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eTroy Bayliss Limited Edition — a collector-grade tribute to one of Ducati's greatest champions, with design details that set it apart from standard covers\u003c\/li\u003e\n\u003cli\u003eCNC-machined lightweight alloy construction, fully anodised for long-term corrosion resistance and a premium finish that holds up through daily use\u003c\/li\u003e\n\u003cli\u003eImpact-resistant, heat-tolerant Lexan sight window reveals the working clutch — a practical visual check and a genuine conversation piece\u003c\/li\u003e\n\u003cli\u003ePre-fitted O-ring seal delivers a watertight closure you can rely on in all weather conditions, no additional prep required\u003c\/li\u003e\n\u003cli\u003eUltralight at just 1,300 g, contributing to a tidier overall weight without any compromise in structural rigidity\u003c\/li\u003e\n\u003cli\u003eOptional titanium bolt kit KV430X available separately to shave further grams and elevate the appearance to full race spec\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Everyday Usability\u003c\/h2\u003e\u003cp\u003eThe CA210TB is machined from a high-grade lightweight alloy billet and then anodised, giving it the kind of surface hardness that resists stone chips, heat cycles and workshop handling alike. For riders who use their Panigale as a daily performance tool rather than a weekend-only trophy, that durability matters. The Lexan window is not a cosmetic gimmick — it lets you monitor clutch condition at a glance without tools or disassembly, which is a genuinely useful feature for anyone who tracks the bike regularly or simply takes mechanical awareness seriously.\u003c\/p\u003e\u003cp\u003eInstallation is straightforward: the O-ring comes pre-mounted, so fitment is clean and leak-free right out of the box. If you want to push the build further, the titanium bolt set KV430X (sold separately) pairs perfectly with this cover, reducing weight at the fastener level and completing the motorsport aesthetic.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis cover is designed and manufactured specifically for the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale V4 (2025-2026)\u003c\/li\u003e\n\u003cli\u003eDucati Panigale V4 S (2025-2026)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eCNC Racing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eCA210TB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEdition\u003c\/td\u003e\n\u003ctd\u003eTroy Bayliss Limited Edition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eCNC-machined lightweight alloy (anodised), Lexan sight window\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeal\u003c\/td\u003e\n\u003ctd\u003eO-ring (pre-fitted)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1,300 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOptional accessory\u003c\/td\u003e\n\u003ctd\u003eTitanium bolt kit KV430X (sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eDucati Panigale V4 \/ V4 S (2025-2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"CNC Racing","offers":[{"title":"Black","offer_id":53168428876042,"sku":"CA210BTB","price":295.26,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":53168428908810,"sku":"CA210RTB","price":295.26,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/CA210BTB.png?v=1780808491"},{"product_id":"transparenter-kupplungsdeckel-cnc-racing-ducati-panigale-v4-ca210pr","title":"CNC Racing Pramac Racing Limited Edition Transparent Clutch Cover Ducati Panigale V4\/S (2025-2026) CA210PR","description":"\u003cp\u003eBorn from the world of MotoGP and shaped for the road and track, the CNC Racing Pramac Racing Limited Edition transparent clutch cover CA210PR is one of the most visually striking upgrades available for the Ducati Panigale V4 and V4S (2025-2026). Machined from solid lightweight alloy, finished in premium anodising and carrying the unmistakable Pramac Racing identity, this is a piece of motorsport heritage you can fit to your own machine.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eLimited-edition Pramac Racing design inspired directly by Ducati's MotoGP programme — a collector-grade finish for road and track\u003c\/li\u003e\n\u003cli\u003eCNC-machined from solid lightweight alloy for maximum rigidity with minimal mass, tipping the scales at just 1,300 g\u003c\/li\u003e\n\u003cli\u003eLexan inspection window offers an unobstructed view of the oil-bath clutch in action — Lexan is impact-resistant and heat-tolerant, performing equally well on the street or at a circuit\u003c\/li\u003e\n\u003cli\u003ePre-fitted O-ring seal delivers complete waterproofing, so the cover is track-day and wet-weather ready straight from the box\u003c\/li\u003e\n\u003cli\u003eAvailable in anodised black or anodised red to suit your Panigale's colour scheme\u003c\/li\u003e\n\u003cli\u003eOptional titanium bolt kit KV430X available separately for a full race-shop finish and further weight saving\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHeritage Meets Precision Engineering\u003c\/h2\u003e\u003cp\u003eThe Pramac Racing Limited Edition badge is not merely cosmetic. The design language references Ducati's factory-supported Pramac team whose machines contest the premier class of Grand Prix racing, making this clutch cover a genuine conversation piece in the paddock or the garage. Every surface is CNC-milled to exacting tolerances, then anodised for a finish that resists heat, oil and track debris without fading. The result is a component that reads as a factory-option part rather than an afterthought accessory.\u003c\/p\u003e\u003ch2\u003eThe Lexan Window — Style With Substance\u003c\/h2\u003e\u003cp\u003eWhere most aftermarket clutch covers simply replace the OEM item, the CA210PR goes a step further by exposing the clutch mechanism through a polycarbonate Lexan window. Lexan is the same material trusted in motorsport applications worldwide: it will not shatter under impact, handles sustained heat without deforming and remains optically clear lap after lap. Whether you are parked in the pits or cornering hard on track, the view of the spinning clutch pack is a genuine spectacle.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThe CNC Racing transparent clutch cover CA210PR is designed and manufactured exclusively for the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale V4 (2025-2026)\u003c\/li\u003e\n\u003cli\u003eDucati Panigale V4S (2025-2026)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eInstallation uses the existing mounting points and the pre-fitted O-ring seal ensures a factory-correct, leak-free fit. For the ultimate finishing touch, pair with the optional titanium bolt kit KV430X (sold separately).\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eCA210PR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eCNC Racing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEdition\u003c\/td\u003e\n\u003ctd\u003ePramac Racing Limited Edition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eCNC-machined lightweight alloy with Lexan inspection window\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeal\u003c\/td\u003e\n\u003ctd\u003eO-ring, waterproof, pre-fitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1,300 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eAnodised (black or red)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOptional accessory\u003c\/td\u003e\n\u003ctd\u003eTitanium bolt kit KV430X (sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eDucati Panigale V4 \/ V4S (2025-2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"CNC Racing","offers":[{"title":"Black","offer_id":53168429203722,"sku":"CA210BPR","price":295.26,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":53168429236490,"sku":"CA210RPR","price":295.26,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/CA210BPR.png?v=1780808491"},{"product_id":"transparenter-kupplungsdeckel-cnc-racing-ducati-panigale-v4-s-2025-ca210","title":"CNC Racing Transparent Clutch Cover for Ducati Panigale V4\/S (2025-2026) CA210S","description":"\u003cp\u003eFew engine-bay details command attention on the Ducati Panigale V4 quite like the wet clutch housing, and the CNC Racing CA210S transparent clutch cover was designed to put it on full display. Machined from lightweight alloy using a dual-pass CNC process, anodised to a depth of finish that rivals the Panigale's own factory aesthetic, and glazed with an impact-resistant Lexan window, this cover turns a functional component into a signature visual statement without compromising a single gram of performance or reliability.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDual-pass CNC machining from lightweight alloy delivers exceptional dimensional accuracy and a surface quality that elevates the entire right-hand engine bay\u003c\/li\u003e\n\u003cli\u003eAnodised finish available in Black (CA210BS), Gold (CA210GS) or Red (CA210RS) — each colour is a part-numbered variant, not a simple dye, ensuring long-term resistance to heat and oil\u003c\/li\u003e\n\u003cli\u003eLexan transparent inspection window provides a live view of the oil-bath clutch in operation; Lexan is engineered for impact resistance and high-temperature stability, making this cover equally at home on road and track\u003c\/li\u003e\n\u003cli\u003eDedicated O-ring seal, pre-fitted at the factory, maintains a fully fluid-tight barrier under sustained heat and high engine loads\u003c\/li\u003e\n\u003cli\u003eTotal cover weight of only 1,300 g keeps unsprung and rotating mass in check\u003c\/li\u003e\n\u003cli\u003eOptional titanium bolt kit KV430X available to complement the finish and shave further grams from the assembly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign, Finish and Heritage\u003c\/h2\u003e\u003cp\u003eCNC Racing's reputation in Italian motorsport circles is built on refusing to treat aesthetics as an afterthought. The CA210S inherits that philosophy directly: every radius, every chamfer and every anodised surface plane has been considered as part of a coherent design language that aligns with the Panigale V4's angular, purposeful bodywork. The transparent Lexan window is not a gimmick — it is a nod to the visibility demanded by track engineers who want to monitor clutch condition at a glance. Choose the Black anodised version for understated aggression, the Gold for a classic racing heritage look, or the Red to echo the Ducati rosso that defines the brand. Part number CA210S references the complete transparent-window variant, with colour-specific suffixes (B\/G\/R) identifying your chosen finish precisely.\u003c\/p\u003e\u003ch2\u003eRoad and Track Performance\u003c\/h2\u003e\u003cp\u003eThe combination of dual-pass CNC machining and anodising is not merely cosmetic. The tight tolerances achieved through double machining mean the cover seats flush against the crankcase every time, eliminating any risk of micro-leaks that a lesser cast part might allow. The Lexan window withstands the heat cycles of repeated track sessions without crazing, yellowing or distorting, while the pre-installed O-ring removes the need for sealant compounds that can cause headaches during subsequent oil changes. At 1,300 g, the cover is genuinely lightweight, and pairing it with the optional KV430X titanium bolt kit pushes weight savings further still.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThe CNC Racing CA210S is designed specifically for the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale V4 (2025-2026)\u003c\/li\u003e\n\u003cli\u003eDucati Panigale V4 S (2025-2026)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAlways verify your model year and variant before ordering. For the titanium bolt kit upgrade, order KV430X separately.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eCA210S (CA210BS \/ CA210GS \/ CA210RS by colour)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eCNC-machined lightweight alloy with Lexan transparent window\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurface finish\u003c\/td\u003e\n\u003ctd\u003eAnodised (Black, Gold or Red)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeal\u003c\/td\u003e\n\u003ctd\u003eO-ring, pre-installed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1,300 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOptional accessory\u003c\/td\u003e\n\u003ctd\u003eTitanium bolt kit KV430X\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eDucati Panigale V4 \/ V4 S (2025-2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"CNC Racing","offers":[{"title":"Black","offer_id":53168429662474,"sku":"CA210BS","price":268.04,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":53168429695242,"sku":"CA210RS","price":268.04,"currency_code":"EUR","in_stock":true},{"title":"Gold","offer_id":53168429728010,"sku":"CA210GS","price":268.04,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/CA210B.png?v=1780808491"},{"product_id":"dashboard-protection-cnc-racing-ducati-panigale-v4-s-r-dc003","title":"CNC Racing Dashboard Protection DC003 for Ducati Panigale V4\/S\/R (2025-2026)","description":"\u003cp\u003eYour Ducati Panigale V4's TFT dashboard is one of the most information-rich — and most exposed — components on the bike. The CNC Racing Dashboard Protection DC003 is the no-compromise answer: a precision CNC-machined alloy surround paired with a scratch-resistant Lexan panel that shields the display every single day, whether you're threading through city traffic or pushing hard on a Sunday run.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCNC-machined from lightweight alloy for a rigid, long-lasting structure that won't flex or rattle over time\u003c\/li\u003e\n\u003cli\u003eAnodised finish provides corrosion resistance alongside a clean, motorsport-inspired look in black or red\u003c\/li\u003e\n\u003cli\u003eScratch-resistant Lexan panel guards the screen against stone chips, minor impacts and everyday abrasion without dimming visibility\u003c\/li\u003e\n\u003cli\u003eWeather and UV resistant — reliable protection in all conditions, season after season\u003c\/li\u003e\n\u003cli\u003ePlug-and-play fitment requires no drilling, cutting or permanent modification to your Panigale\u003c\/li\u003e\n\u003cli\u003eAvailable in two part-numbered options: black (DC003B) and red (DC003R) to match your bike's colour scheme\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEveryday Usability\u003c\/h2\u003e\u003cp\u003eOne of the most overlooked running costs on a high-spec superbike is a damaged or scratched dashboard. A stone chip at motorway speed or a careless lean against a barrier can cloud the display and affect resale value instantly. The DC003 makes preventing that damage completely effortless — it installs directly without tools or modifications, so you can fit it in minutes and forget about it. The Lexan panel is optically clear, meaning there is no compromise to legibility at a glance, at speed or in bright sunlight.\u003c\/p\u003e\u003ch2\u003eBuild Quality and Finish\u003c\/h2\u003e\u003cp\u003eCNC Racing machines the DC003 surround from a lightweight alloy billet, then anodises the surface for lasting resistance to moisture, road grime and UV degradation. The result is a component that feels at home on a factory-spec V4 rather than an afterthought. The red variant (DC003R) adds a vivid accent perfectly suited to Ducati's signature Rossa livery, while the black (DC003B) keeps things understated and universally compatible with any wrap or colour scheme.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThe DC003 is designed exclusively for the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale V4 (model years 2025-2026)\u003c\/li\u003e\n\u003cli\u003eDucati Panigale V4S (model years 2025-2026)\u003c\/li\u003e\n\u003cli\u003eDucati Panigale V4R (model years 2025-2026)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNo other fitment adapters or modifications are required. Plug-and-play installation uses existing mounting points.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eCNC Racing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number (black)\u003c\/td\u003e\n\u003ctd\u003eDC003B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number (red)\u003c\/td\u003e\n\u003ctd\u003eDC003R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eCNC-machined lightweight alloy, Lexan panel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurface finish\u003c\/td\u003e\n\u003ctd\u003eAnodised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailable colours\u003c\/td\u003e\n\u003ctd\u003eBlack (DC003B), Red (DC003R)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eDucati Panigale V4 \/ V4S \/ V4R (2025-2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003ePlug and play, no permanent modification required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"CNC Racing","offers":[{"title":"Black","offer_id":53168429891850,"sku":"DC003B","price":236.09,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":53168429924618,"sku":"DC003R","price":236.09,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/DC003B.png?v=1780808491"},{"product_id":"transparenter-kupplungsdeckel-cnc-racing-ducati-panigale-v4-s-2025-ca210-1","title":"CNC Racing Transparent Clutch Cover CA210 for Ducati Panigale V4\/S (2025-2026)","description":"\u003cp\u003eMachined from solid aluminium billet and finished with a precision anodised surface, the CNC Racing CA210 transparent clutch cover redefines what an engine-side panel can be. Designed exclusively for the Ducati Panigale V4 and V4 S (2025-2026), it pairs race-grade material quality with a Lexan viewing window that puts the wet clutch on full display — no compromises, no shortcuts.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFull-view Lexan window: impact- and heat-resistant polycarbonate panel reveals the oil-bath clutch at a glance, bringing genuine racing character to every ride\u003c\/li\u003e\n\u003cli\u003eCNC-machined aluminium billet construction delivers exceptional rigidity with minimal mass, combining the structural integrity of solid metal with an anodised finish that holds its appearance under sustained use\u003c\/li\u003e\n\u003cli\u003eDedicated O-ring seal ensures oil-tight reliability across the full temperature and stress range — equally at home on the road or a demanding track session\u003c\/li\u003e\n\u003cli\u003ePrecision fitment engineered specifically for the Ducati Panigale V4 and V4 S 2025-2026 chassis — direct replacement with no modification required\u003c\/li\u003e\n\u003cli\u003eOptional titanium bolt kit KV430X available separately for further weight reduction and an elevated aesthetic\u003c\/li\u003e\n\u003cli\u003eAvailable in three anodised finishes — black (CA210B), gold (CA210G) and red (CA210R) — to complement your Panigale's livery\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Materials\u003c\/h2\u003e\u003cp\u003eThe CA210 is produced by CNC Racing using solid-billet aluminium machined to tight tolerances, leaving no cast porosity or weak points in the structure. The anodised surface treatment penetrates the metal rather than sitting on top of it, providing corrosion resistance and colour retention that painted or powder-coated alternatives simply cannot match. The Lexan panel is the same class of polycarbonate used in racing screen applications: it resists the shock loads and elevated temperatures generated around the engine cases without crazing, cracking or discolouring over time. A precision-fitted O-ring completes the assembly, maintaining a reliable oil seal under hard acceleration, sustained high-speed running and the thermal cycling inherent to track use.\u003c\/p\u003e\u003ch2\u003eOn Road and Track\u003c\/h2\u003e\u003cp\u003eBeyond the visual statement, the CA210 serves a practical purpose: the clear window lets you monitor clutch condition without removing the cover, useful during long track days when keeping an eye on wear and oil level matters. The weight of 1,300 g keeps the overall package competitive, and the option to specify the KV430X titanium bolt set further reduces unsprung and rotating mass for those building a focused track weapon. Whether you are preparing a Panigale V4 S for circuit duty or simply want the engine bay to match the bike's premium character on the road, the CA210 delivers on both fronts.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThe CNC Racing CA210 clutch cover is designed and manufactured specifically for the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale V4 — 2025, 2026\u003c\/li\u003e\n\u003cli\u003eDucati Panigale V4 S — 2025, 2026\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAlways verify your model year and variant before ordering. Optional titanium bolt kit: KV430X (sold separately).\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eCA210 (CA210B \/ CA210G \/ CA210R)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eCNC Racing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eCNC-machined aluminium billet, anodised; Lexan polycarbonate window\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1,300 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSeal\u003c\/th\u003e\n\u003ctd\u003eO-ring included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAvailable Colours\u003c\/th\u003e\n\u003ctd\u003eBlack (CA210B), Gold (CA210G), Red (CA210R)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOptional Accessory\u003c\/th\u003e\n\u003ctd\u003eTitanium bolt set KV430X\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment\u003c\/th\u003e\n\u003ctd\u003eDucati Panigale V4 \/ V4 S (2025-2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"CNC Racing","offers":[{"title":"Black","offer_id":53168431169802,"sku":"CA210B","price":254.43,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":53168431202570,"sku":"CA210R","price":254.43,"currency_code":"EUR","in_stock":true},{"title":"Gold","offer_id":53168431235338,"sku":"CA210G","price":254.43,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/CA210B_ba097796-2a60-41e8-a6f5-7ffbf743d299.png?v=1780808491"},{"product_id":"aluminium-motorgehause-rechts-mit-titanschrauben-motocorse-ducati-panigale-v4-s-2025","title":"Motocorse Aluminium Right Engine Cover with Titanium Bolts for Ducati Panigale V4\/S (2025-2026)","description":"\u003cp\u003eEngineered for riders who demand perfection in every component they fit, the Motocorse right engine cover transforms one of the Panigale V4's most visible structural elements into a showcase of Italian craftsmanship. CNC-machined from Anticorodal aluminium alloy and finished with 18 solid titanium bolts, this is a direct OEM replacement that sits flush, fastens cleanly, and looks exceptional from the moment you fit it.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrecision CNC-machined from Anticorodal aluminium alloy — lightweight, rigid and corrosion-resistant by nature\u003c\/li\u003e\n\u003cli\u003eAnodised finish available in silver, black, red or gold for lasting protection and a purposeful racing aesthetic\u003c\/li\u003e\n\u003cli\u003e18 solid titanium bolts included in the kit — exceptional strength-to-weight ratio and superior resistance to fatigue\u003c\/li\u003e\n\u003cli\u003eTrue plug-and-play fitment — no drilling, machining or modification required; fully compatible with all OEM components\u003c\/li\u003e\n\u003cli\u003eDeveloped specifically for the Ducati Panigale V4 and V4 S (2025 model year onwards), ensuring an exact dimensional match\u003c\/li\u003e\n\u003cli\u003eA significant visual and tactile upgrade over the standard cover with a noticeably superior surface finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eItalian Precision, Built to Last\u003c\/h2\u003e\u003cp\u003eMotocorse has built its reputation on uncompromising standards of Italian engineering, and this right engine cover reflects every principle the brand stands for. The Anticorodal alloy chosen for this component offers an outstanding combination of mechanical strength and corrosion resistance, making it equally suited to daily road use in unpredictable weather and the punishing environment of a track day. The anodising process bonds the colour into the surface itself rather than sitting on top of it, which means the finish resists abrasion, chemicals and UV exposure far more effectively than a simple paint or lacquer coat.\u003c\/p\u003e\u003cp\u003eEvery cover leaves the CNC machining centre with tolerances that match or exceed the original Ducati part. The result is a component that installs without persuasion, aligns perfectly with surrounding casings, and presents a consistent gap line that speaks volumes about the quality of the fitment before the engine is even started.\u003c\/p\u003e\u003ch2\u003eTitanium Bolts — Why They Matter\u003c\/h2\u003e\u003cp\u003eThe 18 titanium bolts supplied with the kit are not a cosmetic afterthought. Solid titanium delivers a strength-to-weight advantage over stainless steel fasteners and offers inherent resistance to corrosion and galling, which matters on an engine cover that is removed for servicing and inspections throughout the motorcycle's life. Using matched titanium hardware also ensures that the torque characteristics of each bolt are consistent, protecting the aluminium threads in the cover itself and reducing the risk of fastener-related wear over time.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis engine cover is designed and manufactured exclusively for the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale V4 — 2025 to 2026\u003c\/li\u003e\n\u003cli\u003eDucati Panigale V4 S — 2025 to 2026\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eInstallation requires no modification to the motorcycle. The cover replaces the original right-hand engine casing directly, retaining full compatibility with all standard OEM ancillaries, sensors and surrounding components.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eMotocorse\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eComponent\u003c\/th\u003e\n\u003ctd\u003eRight engine cover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAnticorodal aluminium alloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSurface finish\u003c\/th\u003e\n\u003ctd\u003eAnodised — silver, black, red or gold\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIncluded fasteners\u003c\/th\u003e\n\u003ctd\u003e18 solid titanium bolts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturing process\u003c\/th\u003e\n\u003ctd\u003eCNC-machined\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment type\u003c\/th\u003e\n\u003ctd\u003eDirect OEM replacement, plug-and-play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible models\u003c\/th\u003e\n\u003ctd\u003eDucati Panigale V4, V4 S (2025-2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Motocorse","offers":[{"title":"Silver","offer_id":53168446275850,"sku":"102110011S","price":2368.1,"currency_code":"EUR","in_stock":true},{"title":"Black","offer_id":53168446308618,"sku":"102110011B","price":2368.1,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":53168446341386,"sku":"102110011R","price":2368.1,"currency_code":"EUR","in_stock":true},{"title":"Gold","offer_id":53168446374154,"sku":"102110011G","price":2368.1,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/102110010S_6cf9345f-f0b0-4416-9256-bc502a058ed0.png?v=1780808492"},{"product_id":"puig-winglets-spoiler-downforce-aprilia-rs-457-24-25","title":"Puig Engine Cover Protector Complete Set for Aprilia RS 457 (2024-2025) - Black","description":"\u003cp\u003ePuig's engine cover protector complete set is engineered around the racing heritage of the Aprilia RS 457, delivering a purposeful, track-optimised finish that integrates cleanly with the bike's aggressive bodywork. Designed from the ground up for the 2024–2025 RS 457, this complete set covers every critical engine case area — so the motorcycle's character and your investment are both properly defended before you head to the circuit.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eComplete coverage of all relevant engine covers on the Aprilia RS 457 (2024–2025) in a single kit\u003c\/li\u003e\n\u003cli\u003eActs as a sacrificial layer, absorbing and dispersing impact energy to prevent costly case damage and oil loss\u003c\/li\u003e\n\u003cli\u003eHigh-strength, impact- and abrasion-resistant plastic construction proven under sustained slide conditions\u003c\/li\u003e\n\u003cli\u003eTrack- and racing-optimised design that sits flush with the fairing for a clean, unobtrusive look\u003c\/li\u003e\n\u003cli\u003eVehicle-specific fit — designed precisely for the RS 457, no modifications or adaptation required\u003c\/li\u003e\n\u003cli\u003eSuitable for road use, spirited riding, trackdays and competitive race training\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign, Finish and Heritage\u003c\/h2\u003e\u003cp\u003ePuig has built its reputation over decades supplying circuit-proven accessories to road riders and racers alike. The engine cover protector set for the RS 457 reflects that lineage directly: the matte black finish is understated yet intentional, complementing the RS 457's sport fairing without drawing attention away from the machine's lines. The profile is purposefully low, keeping the overall silhouette tight and the integration visually seamless.\u003c\/p\u003e\u003cp\u003eThe black colourway also carries a practical advantage on track — it remains neutral against the visual language of any livery or decal kit, from the stock Aprilia colour scheme to custom race graphics. This is protection that looks as considered as it performs.\u003c\/p\u003e\u003ch2\u003eWhy Engine Cover Protection Matters\u003c\/h2\u003e\u003ch3\u003ePreventing Costly Secondary Damage\u003c\/h3\u003e\u003cp\u003eA damaged engine cover does not simply mean a cosmetic repair bill. Cracked or ground-through cases can lead to oil loss mid-session, engine damage, and a premature end to a trackday or race. Puig's protectors serve as a sacrificial shield, taking the punishment of tarmac contact so the cases beneath do not have to.\u003c\/p\u003e\u003ch3\u003eTrack Regulations and Peace of Mind\u003c\/h3\u003e\u003cp\u003eAt many trackday and race training events, engine case protection is mandatory or strongly recommended by organisers. Arriving with this complete set already fitted means you can focus entirely on the riding — not on paperwork, scrutineering queries or the cost of a rebuild.\u003c\/p\u003e\u003ch3\u003eSustained Slide Performance\u003c\/h3\u003e\u003cp\u003eThe protectors are rated for high-load scenarios, including prolonged slide phases where sustained abrasion would otherwise wear through unprotected alloy covers. The high-strength plastic compound resists both impact shock and progressive abrasion, maintaining its protective function throughout the slide.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis Puig engine cover protector set is designed and manufactured exclusively for the following motorcycle:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eAprilia RS 457 — model years 2024 and 2025\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThe vehicle-specific design ensures a precise, rattle-free fit with no cutting, drilling or adaptation required. Installation uses existing mounting points for a clean result.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003ePuig\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct\u003c\/th\u003e\n\u003ctd\u003eEngine Cover Protector Complete Set\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment\u003c\/th\u003e\n\u003ctd\u003eAprilia RS 457 (2024–2025)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eAll relevant engine covers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eHigh-strength, impact- and abrasion-resistant plastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDesign\u003c\/th\u003e\n\u003ctd\u003eTrack and racing optimised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntended Use\u003c\/th\u003e\n\u003ctd\u003eRoad, spirited riding, trackday, race training\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Puig","offers":[{"title":"Black","offer_id":53168546152714,"sku":"SY-PUIGWING-210BFE-01","price":144.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/5.png?v=1780808500"},{"product_id":"dashboard-protection-bonamici-racing-bmw-k67","title":"Bonamici Racing Dashboard Protection for BMW S1000RR K67 (2019-2026) DCP08","description":"\u003cp\u003eWhen you are pushing a BMW S1000RR K67 to its limits on track, your dashboard is one of the most expensive and vulnerable components in the cockpit. The Bonamici Racing DCP08 dashboard protection is engineered specifically for circuit use, shielding the S1000RR's display from stone strikes, debris impacts and crash damage so your focus stays on lap times, not repair bills.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCNC-machined construction delivers a precise, rattle-free fit tailored exactly to the BMW S1000RR K67 dashboard profile.\u003c\/li\u003e\n\u003cli\u003ePlexiglas screen panel keeps the display fully legible whilst forming a tough sacrificial barrier against scratches and flying debris.\u003c\/li\u003e\n\u003cli\u003eCrash protection built in — the guard absorbs and deflects impact energy in the event of a fall, minimising costly display damage.\u003c\/li\u003e\n\u003cli\u003eDesigned for racing and high-performance track days where cockpit protection is a practical necessity, not an afterthought.\u003c\/li\u003e\n\u003cli\u003e100% Made in Italy, manufactured to Bonamici Racing's exacting CNC tolerances for long-term durability under race conditions.\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on fitment — no cutting, no modification, no guesswork.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuilt for the Track, Ready for the Road\u003c\/h2\u003e\u003cp\u003eBonamici Racing has built its reputation supplying Italian and World Superbike teams with precision CNC accessories, and the DCP08 reflects that same uncompromising standard. The mounting frame is machined from billet aluminium to hold its shape under vibration and heat cycles typical of sustained track use. The plexiglas lens sits flush within the frame, keeping glare and distortion to a minimum so you can read corner speed and lap data at a glance. Whether you are running a sprint race or a full track day, the DCP08 removes one significant worry from your pre-grid checklist.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThe Bonamici Racing DCP08 dashboard protection is designed exclusively for the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBMW S1000RR K67 — model years 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eNo other models or year ranges are supported. Always verify your chassis code before ordering.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBonamici Racing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eDCP08\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eBMW S1000RR K67 (2019-2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eCNC-machined aluminium frame\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLens material\u003c\/td\u003e\n\u003ctd\u003ePlexiglas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack (standard)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of manufacture\u003c\/td\u003e\n\u003ctd\u003eItaly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntended use\u003c\/td\u003e\n\u003ctd\u003eTrack, racing and road\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Bonamici Racing","offers":[{"title":"Default Title","offer_id":53168703406346,"sku":"DCP08","price":204.56,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/DCP08.png?v=1780811603"},{"product_id":"dashboard-protection-bonamici-racing-suzuki-dcp05","title":"Bonamici Racing Dashboard Protection for Suzuki GSX-R 1000 (2017-2023) – DCP05","description":"\u003cp\u003eWhen a crash threatens to end your session early, the last thing you want is a cracked dash display sidelining your GSX-R 1000. Bonamici Racing's DCP05 dashboard protection is a precision-engineered Italian-made guard that keeps the instrument display intact whether you are chasing lap times or commuting hard.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCNC-machined construction delivers an exact, rattle-free fit specific to the Suzuki GSX-R 1000 (2017-2023) — no adapting, no compromises.\u003c\/li\u003e\n\u003cli\u003ePlexiglass cover shields the display face from scratches, stone chips, and airborne debris that would otherwise pit or crack the screen.\u003c\/li\u003e\n\u003cli\u003eImpact-absorbing design disperses crash energy around the display, reducing the risk of cracks or shattering in a spill.\u003c\/li\u003e\n\u003cli\u003eDesigned explicitly for racing and performance track use, where display readability and durability are non-negotiable.\u003c\/li\u003e\n\u003cli\u003e100% Made in Italy — manufactured to the exacting tolerances Bonamici Racing is known for across the World Superbike paddock.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuilt for Riders Who Cannot Afford Downtime\u003c\/h2\u003e\u003cp\u003eBonamici Racing develops every component with the demands of competitive riding in mind. The DCP05 is machined from high-grade aluminium stock and paired with an optically clear plexiglass lens, so the display remains fully legible at a glance while being shielded from the hazards of the track environment. The precision CNC process ensures every mounting point lines up perfectly with the GSX-R 1000's factory hardware — fitment takes minutes, and the guard sits flush without obscuring any part of the instrument cluster.\u003c\/p\u003e\u003ch2\u003eTrack Performance, Road Reliability\u003c\/h2\u003e\u003cp\u003eWhether you are at a trackday, a club race, or simply covering serious road miles, a damaged dashboard display is an expensive and inconvenient repair. The DCP05 addresses that vulnerability directly. The plexiglass panel intercepts grit, insects, and errant stones before they reach the screen, while the rigid CNC-machined frame ensures that in the event of a tip-over or more serious incident, the display is protected from direct contact with the ground or fairings. Black anodised finish integrates cleanly with the GSX-R 1000's standard instrument surround.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis dashboard protection is designed and manufactured exclusively for the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eSuzuki GSX-R 1000 — model years 2017, 2018, 2019, 2020, 2021, 2022, 2023\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eBonamici Racing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eDCP05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment\u003c\/th\u003e\n\u003ctd\u003eSuzuki GSX-R 1000 (2017-2023)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eCNC-machined aluminium with plexiglass display cover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntended Use\u003c\/th\u003e\n\u003ctd\u003eRoad and track\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOrigin\u003c\/th\u003e\n\u003ctd\u003eMade in Italy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Bonamici Racing","offers":[{"title":"Default Title","offer_id":53168703471882,"sku":"DCP05","price":204.56,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/DCP05.png?v=1780811606"},{"product_id":"dashboard-protection-bonamici-racing-aprilia-rsv4-17-20","title":"Bonamici Racing Dashboard Protection for Aprilia RSV4 \/ 1100 Factory \/ RF \/ RR (2017-2020) DCP06","description":"\u003cp\u003eBonamici Racing has built its reputation on Italian precision engineering crafted for the track, and the DCP06 dashboard protection for the Aprilia RSV4, RSV4 RF, RSV4 RR, RSV4 R, RSV4 1100 Factory and RSV4 Factory (2017-2020) is a perfect expression of that heritage. Machined from solid aluminium using CNC technology and fitted with a optically clear plexiglass screen, this guard is designed to preserve every detail of your instrument cluster — in the paddock, on the circuit, and on the road.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCNC-machined aluminium construction delivers a precise, rattle-free fit specific to the RSV4 instrument housing — no adapters or trimming required.\u003c\/li\u003e\n\u003cli\u003eOptically clear plexiglass cover shields the display from stone chips, scratches and debris impacts without obscuring readability at speed.\u003c\/li\u003e\n\u003cli\u003eStructural protection in the event of a get-off, guarding your dashboard against contact with the ground or other surfaces.\u003c\/li\u003e\n\u003cli\u003eDesigned and manufactured 100% in Italy by Bonamici Racing — a marque trusted by WorldSBK teams and performance riders worldwide.\u003c\/li\u003e\n\u003cli\u003eClean, purposeful black finish integrates naturally with the RSV4's race-derived bodywork and cockpit aesthetic.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign, Finish and Heritage\u003c\/h2\u003e\u003cp\u003eBonamici Racing was founded on the principle that aftermarket components should match the quality standards of the original equipment they protect. The DCP06 carries that ethos forward: every surface is CNC-machined to exact tolerances, and the anodised black finish resists fading and corrosion through repeated track use. The plexiglass lens is fitted cleanly within the aluminium surround, giving the cockpit a purposeful, factory-quality appearance that generic adhesive screen protectors simply cannot match.\u003c\/p\u003e\u003cp\u003eFor riders who invest in their RSV4 as a precision instrument — whether for weekend track days or full competition — replacing a damaged instrument cluster is a significant and avoidable expense. The DCP06 addresses that risk with a solution that looks as good as it performs.\u003c\/p\u003e\u003ch2\u003ePerformance and Track Use\u003c\/h2\u003e\u003cp\u003eTrack riding and spirited road use expose dashboards to a constant stream of debris, and a lowside or tip-over at low speed can write off an otherwise unharmed instrument cluster in an instant. The Bonamici Racing DCP06 is engineered specifically for these conditions: the plexiglass lens absorbs minor impacts and deflects stones and grit, while the CNC aluminium frame provides a rigid barrier in more serious contact situations. Installation uses the existing mounting points on the RSV4 cockpit assembly, keeping the fit factory-tight with no drilling or modification.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAprilia RSV4 R (2017-2020)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 RR (2017-2020)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 RF (2017-2020)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 Factory (2017-2020)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 1100 Factory (2017-2020)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eDCP06\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eBonamici Racing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eCNC-machined aluminium with plexiglass cover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacture\u003c\/th\u003e\n\u003ctd\u003e100% Made in Italy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment\u003c\/th\u003e\n\u003ctd\u003eAprilia RSV4 \/ RSV4 R \/ RSV4 RR \/ RSV4 RF \/ RSV4 Factory \/ RSV4 1100 Factory (2017-2020)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eUses existing mounting points, no drilling required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Bonamici Racing","offers":[{"title":"Default Title","offer_id":53168703504650,"sku":"DCP06","price":204.56,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/DCP06NEW.png?v=1780811608"}],"url":"https:\/\/inter-pace.com\/cs\/collections\/bike-protectors.oembed","provider":"Inter-Pace","version":"1.0","type":"link"}