{"title":"Wheels accessories","description":"\u003cp\u003eWheel accessories — quick-change axle kits, spacers, nuts and related hardware.\u003c\/p\u003e","products":[{"product_id":"k-bike-aluminium-front-axle-spacer-kit-ducati-panigale-v4-v4-s-v4-r-kb","title":"K-Bike Aluminium Front Axle Spacer Kit for Ducati Panigale V4 \/ V4 S \/ V4 R (2018-2024) KB.DIS.E.KIT1","description":"\u003cp\u003eEvery gram saved at the axle is a gram that works against you on track — which is exactly why K-Bike developed these Ergal aluminium front axle spacers for the Ducati Panigale V4, V4 S and V4 R. Replacing the factory zinc-plated steel spacers with the KB.DIS.E.KIT1, you gain an immediate weight reduction of approximately 30 % at a component that rotates with every wheel revolution — the kind of detail that separates a carefully assembled racing machine from an ordinary trackday conversion.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDirect replacement for the original front axle spacers on the Ducati Panigale V4, V4 S and V4 R (2018-2024)\u003c\/li\u003e\n\u003cli\u003eMachined from Ergal aluminium, saving approximately 30 % in weight versus the standard zinc-plated steel spacers\u003c\/li\u003e\n\u003cli\u003eWeight reduction at a rotating, axle-adjacent component — one of the most effective places to shed unsprung mass\u003c\/li\u003e\n\u003cli\u003eBolt-on fitment designed to match OEM geometry precisely\u003c\/li\u003e\n\u003cli\u003ePurposeful K-Bike lightweight accessory built for racing and serious track use\u003c\/li\u003e\n\u003cli\u003ePart number KB.DIS.E.KIT1 for straightforward identification and re-ordering\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eLightweight Engineering Where It Counts\u003c\/h2\u003e\u003cp\u003eIt is tempting to focus weight-reduction efforts on the obvious components — exhausts, wheels, bodywork. K-Bike takes a more disciplined approach: the KB.DIS.E.KIT1 targets the front axle spacers, components that sit as close to the hub as possible and that many builders overlook entirely. Manufactured from Ergal aluminium — the same high-strength alloy used throughout motorsport for its outstanding strength-to-weight ratio — these spacers shed around 30 % compared to the factory zinc-plated steel parts without any compromise in structural integrity.\u003c\/p\u003e\u003cp\u003eOn a machine as focused as the Ducati Panigale V4, meaningful performance gains come from accumulating small improvements across the entire motorcycle. Rotating and axle-adjacent mass has a disproportionate effect on handling response, and eliminating unnecessary weight at the front axle contributes to a sharper, more communicative front end. These spacers slot seamlessly into a wider programme of track preparation alongside lightweight wheel nuts, titanium fasteners and performance brake components.\u003c\/p\u003e\u003ch2\u003eIntended Use\u003c\/h2\u003e\u003cp\u003eThe K-Bike Aluminium Front Axle Spacer Kit is designed exclusively for competition and race track use. It is not intended for road use or road registration. All K-Bike products are produced for motorsport applications only.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThe KB.DIS.E.KIT1 fits the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale V4 — 2018 to 2024\u003c\/li\u003e\n\u003cli\u003eDucati Panigale V4 S — 2018 to 2024\u003c\/li\u003e\n\u003cli\u003eDucati Panigale V4 R — 2018 to 2024\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eK-Bike\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eKB.DIS.E.KIT1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eAluminium axle spacers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePosition\u003c\/td\u003e\n\u003ctd\u003eFront axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eErgal aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight saving\u003c\/td\u003e\n\u003ctd\u003eApprox. 30 % versus standard steel spacers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eDucati Panigale V4 \/ V4 S \/ V4 R, 2018-2024\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntended use\u003c\/td\u003e\n\u003ctd\u003eRace track use only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"K-Bike","offers":[{"title":"Default Title","offer_id":53169051697418,"sku":"KB.DIS.E.KIT1","price":29.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/KB.DIS.E.KIT1_4e9a04a9-6f69-475c-a118-6da53fdf90a4.png?v=1784300805"},{"product_id":"k-bike-aluminium-spacer-kit-ducati-panigale-1199-1199-s-1199-r-kb-dis","title":"K-Bike Aluminium Spacer Kit for Ducati Panigale 1199 \/ 1199 S \/ 1199 R (2012–2017) KB.DIS.E.KIT1","description":"\u003cp\u003eWhere uncompromising build quality meets purposeful weight reduction, the K-Bike aluminium spacer kit KB.DIS.E.KIT1 stands as a study in detail-obsessed race engineering. Machined from Ergal aluminium and designed specifically for the Ducati Panigale 1199 front axle, these spacers replace the factory zinc-plated steel items with a component worthy of the iconic V-twin beneath them — saving approximately 30% in weight at a point that most builders overlook.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eErgal aluminium construction delivers around 30% weight saving over the original zinc-plated steel spacers\u003c\/li\u003e\n\u003cli\u003ePrecision-engineered as a direct replacement for the factory front axle spacers on the Panigale 1199 platform\u003c\/li\u003e\n\u003cli\u003eCovers all three variants — Panigale 1199, 1199 S and 1199 R — across the full 2012–2017 production run\u003c\/li\u003e\n\u003cli\u003eClean racing aesthetic that complements any track-focused Panigale build\u003c\/li\u003e\n\u003cli\u003eK-Bike quality: developed by specialists for riders who treat every gram as a performance variable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHeritage, Finish and the Philosophy of Detail\u003c\/h2\u003e\u003cp\u003eK-Bike has built its reputation on producing components that reflect the same exacting standards found in professional paddock builds. The KB.DIS.E.KIT1 spacer kit embodies that approach: there is nothing provisional or approximate about it. Ergal — the high-strength aluminium alloy trusted across motorsport for its exceptional stiffness-to-weight ratio — is the material of choice here, and the machining finish is consistent with a component you would expect to find on a fully prepared Superbike rather than a roadgoing conversion.\u003c\/p\u003e\u003cp\u003eThe design decision to address front axle spacers speaks to a broader philosophy. Serious weight reduction is never the result of a single dramatic change; it is the cumulative outcome of making the correct choice at every junction in a build. Replacing heavy factory steel spacers with precisely machined Ergal items is exactly that kind of considered decision — invisible to the casual observer, but entirely logical to anyone who understands what a Panigale 1199 is capable of on track.\u003c\/p\u003e\u003ch2\u003ePerformance on Track\u003c\/h2\u003e\u003cp\u003eThe Ducati Panigale 1199 was already a landmark machine when it arrived, combining a compact twin-cylinder architecture with chassis geometry demanding precision from every ancillary component. At the front axle, spacer tolerances and mass both matter: lighter rotating and unsprung components contribute to sharper steering response and reduced gyroscopic effect through directional changes. The K-Bike kit addresses both without requiring any modification to the surrounding architecture — a straight swap that pays dividends lap after lap.\u003c\/p\u003e\u003cp\u003eWhether preparing for a trackday, building a dedicated circuit machine, or systematically reducing mass across an existing Panigale 1199 setup, this kit represents a technically sound and visually cohesive upgrade over the standard items.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis kit fits the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale 1199 (2012–2017)\u003c\/li\u003e\n\u003cli\u003eDucati Panigale 1199 S (2012–2017)\u003c\/li\u003e\n\u003cli\u003eDucati Panigale 1199 R (2012–2017)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePosition: front wheel axle. Replaces the original zinc-plated steel spacers as supplied from the factory.\u003c\/p\u003e\u003cp\u003eNote: All K-Bike products are intended exclusively for motorsport and race use.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: K-Bike\u003c\/li\u003e\n\u003cli\u003ePart number: KB.DIS.E.KIT1\u003c\/li\u003e\n\u003cli\u003eType: Aluminium axle spacers\u003c\/li\u003e\n\u003cli\u003ePosition: Front wheel axle\u003c\/li\u003e\n\u003cli\u003eMaterial: Ergal aluminium\u003c\/li\u003e\n\u003cli\u003eReplaces: Original zinc-plated steel spacers\u003c\/li\u003e\n\u003cli\u003eWeight saving: approx. 30% compared to original steel spacers\u003c\/li\u003e\n\u003cli\u003eIntended use: Race use only\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"K-Bike","offers":[{"title":"Default Title","offer_id":53169051762954,"sku":"KB.DIS.E.KIT1","price":29.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/KB.DIS.E.KIT1_f1a3dfc3-1fdf-43fe-a7a3-a62959524efc.png?v=1784300810"},{"product_id":"k-bike-aluminium-front-axle-spacer-kit-ducati-panigale-1299-s-kb-dis-e","title":"K-Bike Aluminium Front Axle Spacer Kit for Ducati Panigale 1299\/S (2015-2018) KB.DIS.E.KIT1","description":"\u003cp\u003eEngineered exclusively for track use, the K-Bike KB.DIS.E.KIT1 aluminium spacer kit is a precision-grade front axle upgrade for the Ducati Panigale 1299 and 1299 S (2015-2018). Machined from Ergal aluminium to replace the standard zinc-plated steel spacers, this kit shaves approximately 30% of the weight at the front axle — the kind of marginal gain that separates a genuinely optimised track machine from one that merely looks the part.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDedicated fitment for Ducati Panigale 1299 and 1299 S, model years 2015 to 2018\u003c\/li\u003e\n\u003cli\u003eErgal aluminium construction saves approximately 30% over the original steel spacers\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the zinc-plated steel OEM front axle spacers\u003c\/li\u003e\n\u003cli\u003eDeveloped specifically for racing, trackday and high-performance supersport builds\u003c\/li\u003e\n\u003cli\u003ePart of K-Bike's focused range of racing-grade lightweight components\u003c\/li\u003e\n\u003cli\u003eManufactured exclusively for competition use — not road-legal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eErgal Aluminium: the Right Material Where It Matters\u003c\/h2\u003e\u003cp\u003eErgal is a high-strength aluminium alloy widely used in aerospace and motorsport applications. It delivers an exceptional strength-to-weight ratio, making it the natural choice for front axle spacers that must handle the dynamic loads of aggressive track riding while contributing to an uncompromising weight-reduction programme.\u003c\/p\u003e\u003cp\u003eThe standard Ducati Panigale 1299 already arrives with impressive performance credentials, but dedicated trackday riders and club racers know that meaningful improvement comes from accumulating small gains across every component. Replacing the factory steel spacers with this Ergal kit is precisely the kind of systematic, detail-oriented upgrade that adds up when the stopwatch is running.\u003c\/p\u003e\u003ch2\u003eRace-Focused Design Philosophy\u003c\/h2\u003e\u003cp\u003eK-Bike develops components for riders who approach their Panigale as a race tool rather than a road machine. The KB.DIS.E.KIT1 kit reflects that philosophy: no unnecessary complexity, no compromise on material quality, and an absolute focus on reducing unsprung and rotating mass at the front axle. For anyone building a Panigale 1299 for circuit use — whether a full race conversion or a serious trackday setup — these spacers represent a logical and worthwhile investment.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale 1299 (2015, 2016, 2017, 2018)\u003c\/li\u003e\n\u003cli\u003eDucati Panigale 1299 S (2015, 2016, 2017, 2018)\u003c\/li\u003e\n\u003cli\u003ePosition: front wheel axle\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note: all K-Bike products are intended exclusively for motorsport and competition use. This kit is not approved for use on public roads.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eK-Bike\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eKB.DIS.E.KIT1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003eAluminium axle spacers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePosition\u003c\/td\u003e\n\u003ctd\u003eFront wheel axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eErgal aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOEM comparison\u003c\/td\u003e\n\u003ctd\u003eReplaces original zinc-plated steel spacers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight saving\u003c\/td\u003e\n\u003ctd\u003eApprox. 30% vs. original steel spacers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntended use\u003c\/td\u003e\n\u003ctd\u003eRacing use only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"K-Bike","offers":[{"title":"Default Title","offer_id":53169051959562,"sku":"KB.DIS.E.KIT1","price":29.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/KB.DIS.E.KIT1_59c2e6ed-96c8-4f05-9fc9-3b0b239cf120.png?v=1784300814"},{"product_id":"k-bike-aluminium-axle-spacer-kit-ducati-panigale-959-kb-dis-e-kit1","title":"K-Bike Aluminium Axle Spacer Kit for Ducati Panigale 959 (2016-2019) KB.DIS.E.KIT1","description":"\u003cp\u003eShaving weight from your Ducati Panigale 959 starts with the details that most riders overlook. The K-Bike Aluminium Axle Spacer Kit KB.DIS.E.KIT1 replaces the standard zinc-plated steel front axle spacers with precision-machined Ergal aluminium units, cutting approximately 30% of the weight of the original components — a deliberate, technically sound upgrade for anyone building a track-focused 959.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDirect-fit replacement for factory front axle spacers on the Ducati Panigale 959 (2016–2019)\u003c\/li\u003e\n\u003cli\u003eMachined from Ergal aluminium for a genuine reduction of approximately 30% in weight versus the original steel spacers\u003c\/li\u003e\n\u003cli\u003eReplaces standard zinc-plated steel spacers with a purpose-built racing alternative\u003c\/li\u003e\n\u003cli\u003ePart of K-Bike's dedicated racing accessories range, designed around functional lightweight construction\u003c\/li\u003e\n\u003cli\u003eComplements wider track and supersport build upgrades on the Panigale 959 platform\u003c\/li\u003e\n\u003cli\u003eIntended exclusively for motorsport and track use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePrecision Where It Counts\u003c\/h2\u003e\u003cp\u003eReal lightweight construction on a motorcycle is rarely achieved through a single headline component. It accumulates through a series of deliberate, technically informed choices across the whole machine. The standard front axle spacers on the Panigale 959 are functional, but they are made from zinc-plated steel — a material choice optimised for cost and corrosion resistance, not outright weight reduction.\u003c\/p\u003e\u003cp\u003eK-Bike's KB.DIS.E.KIT1 addresses exactly this. Machined from Ergal aluminium — an aerospace-grade alloy widely used in motorsport for its exceptional strength-to-weight ratio — these spacers integrate cleanly into the front axle assembly and deliver a measurable weight saving without any compromise to dimensional accuracy or fitment integrity.\u003c\/p\u003e\u003ch2\u003eBuilt for Track Use\u003c\/h2\u003e\u003cp\u003eThe Ducati Panigale 959 is a precision supersport machine that rewards riders who take the details seriously. Whether you are preparing for trackdays, building a dedicated circuit bike, or simply committing to a thorough performance-oriented rebuild, the K-Bike spacer kit belongs in the same conversation as titanium fasteners, carbon bodywork and lightweight brake hardware. Each component contributes to the whole, and this kit ensures the front axle assembly carries no unnecessary mass into every corner.\u003c\/p\u003e\u003cp\u003ePlease note: all K-Bike products are intended exclusively for motorsport and racing use. They are not approved for use on public roads.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale 959 — model years 2016, 2017, 2018, 2019\u003c\/li\u003e\n\u003cli\u003ePosition: front wheel axle spacers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eK-Bike\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eKB.DIS.E.KIT1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eAluminium axle spacers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePosition\u003c\/th\u003e\n\u003ctd\u003eFront wheel axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eErgal aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOEM Comparison\u003c\/th\u003e\n\u003ctd\u003eReplaces original zinc-plated steel spacers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight Saving\u003c\/th\u003e\n\u003ctd\u003eapprox. 30% versus original steel spacers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntended Use\u003c\/th\u003e\n\u003ctd\u003eRacing use only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"K-Bike","offers":[{"title":"Default Title","offer_id":53169051992330,"sku":"KB.DIS.E.KIT1","price":29.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/KB.DIS.E.KIT1_4174ad9f-639b-4199-9131-9f7b4d83aaf7.png?v=1784300819"},{"product_id":"k-bike-aluminium-axle-spacer-kit-ducati-panigale-v2-955-kb-dis-e-kit1","title":"K-Bike Aluminium Axle Spacer Kit for Ducati Panigale V2 955 (2020-2024) KB.DIS.E.KIT1","description":"\u003cp\u003eMachined from aerospace-grade Ergal aluminium, the K-Bike axle spacer kit KB.DIS.E.KIT1 replaces the standard zinc-plated steel front axle spacers on the Ducati Panigale V2 955 with components that are lighter, more precisely finished, and entirely worthy of the machine beneath them. Where the factory opted for steel, K-Bike chose a material that cuts approximately 30% of the weight while raising the standard of every component it touches.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eErgal aluminium construction delivers approximately 30% weight saving over the original zinc-plated steel spacers\u003c\/li\u003e\n\u003cli\u003eDirect replacement for factory front axle spacers on the Ducati Panigale V2 955, model years 2020 to 2024\u003c\/li\u003e\n\u003cli\u003ePrecision machined to exact OEM dimensions — drop-in fitment with no modifications required\u003c\/li\u003e\n\u003cli\u003ePart of a systematic weight-reduction approach suited to trackday and race builds\u003c\/li\u003e\n\u003cli\u003ePremium K-Bike racing accessory, designed for riders who optimise every component with intention\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Material Choice\u003c\/h2\u003e\u003cp\u003eThe K-Bike KB.DIS.E.KIT1 is built around a single principle: every gram saved should also be a quality upgrade. Ergal aluminium — a high-tensile aluminium alloy widely used in motorsport and aerospace applications — offers the structural integrity needed at the front axle while eliminating the weight penalty of conventional steel. The finish is clean and functional, consistent with K-Bike's uncompromising approach to racing accessories.\u003c\/p\u003e\u003cp\u003eThis is not a cosmetic change. Replacing the steel originals with Ergal spacers is one of those considered choices that characterises a properly built track machine — the kind of detail that, accumulated across a full build, produces a measurably lighter, more focused motorcycle.\u003c\/p\u003e\u003ch2\u003eDesigned for the Serious Panigale V2 Build\u003c\/h2\u003e\u003cp\u003eThe Ducati Panigale V2 955 is a supersport motorcycle that rewards systematic optimisation. Larger components such as the exhaust, fairing and suspension rightly attract attention during a track build, but the riders who extract the most from their machines understand that marginal gains at every point compound into something significant. The K-Bike axle spacer kit belongs to that category of parts — unassuming in size, precise in purpose.\u003c\/p\u003e\u003cp\u003eWhether the Panigale V2 is being prepared for regular trackdays, a full race conversion, or a high-specification road-to-track build, these spacers represent the correct choice at the front axle. No unnecessary complexity, no compromise on material quality.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThe K-Bike KB.DIS.E.KIT1 axle spacer kit fits the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDucati Panigale V2 955 — model years 2020, 2021, 2022, 2023, 2024\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003ePosition: front axle. Replaces the original zinc-plated steel spacers. For race use only.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eK-Bike\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eKB.DIS.E.KIT1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eAluminium axle spacer kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePosition\u003c\/td\u003e\n\u003ctd\u003eFront axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eErgal aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOEM comparison\u003c\/td\u003e\n\u003ctd\u003eReplaces original zinc-plated steel spacers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight saving\u003c\/td\u003e\n\u003ctd\u003eapprox. 30% versus original steel spacers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntended use\u003c\/td\u003e\n\u003ctd\u003eRace use only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"K-Bike","offers":[{"title":"Default Title","offer_id":53169052156170,"sku":"KB.DIS.E.KIT1","price":29.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/KB.DIS.E.KIT1_491592a9-a1cd-4ec7-a1dc-c9ebe35595e6.png?v=1784300828"},{"product_id":"ducabike-left-front-wheel-cap-ducati-desertx-2022-2025-trs01","title":"Ducabike Left Front Wheel Cap Ducati DesertX (2022-2025) – TRS01","description":"\u003cp\u003eYour Ducati DesertX (2022-2025) can wear the Ducabike Left Front Wheel Cap TRS01, milled from a solid block of aluminium. The Ducati DesertX rides exactly as before; the difference lies in the machined surface that now stands in for the original part. Function stays the same as with the original part, while the DesertX gains Italian billet craftsmanship in plain sight.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSolid-machined aluminium construction\u003c\/li\u003e\n\u003cli\u003eOne part in the box\u003c\/li\u003e\n\u003cli\u003eAnodised finish in red, gold and black\u003c\/li\u003e\n\u003cli\u003eReplaces the original part, no modifications needed\u003c\/li\u003e\n\u003cli\u003eMade to fit the Ducati DesertX (2022-2025)\u003c\/li\u003e\n\u003cli\u003eMade in Italy by Ducabike\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eShade and Finish\u003c\/h2\u003e\u003cp\u003eThe available finish for TRS01 is red, gold and black, shown in the selection on this page.\u003c\/p\u003e\u003ch2\u003eFrom Solid Block to Finished Part\u003c\/h2\u003e\u003cp\u003eDucabike is an Italian manufacturer, today also trading as DBK Special Parts, and produces TRS01 in Italy. Instead of the mass-production methods behind the original part, Ducabike mills the part from solid aluminium. Next to other Ducabike billet parts, reference TRS01 shares the same material, machining and anodised look. Reference TRS01 is shaped to follow the original design lines, so it does not look like an add-on.\u003c\/p\u003e\u003ch2\u003eCompatibility Details\u003c\/h2\u003e\u003cp\u003eFitment for the Ducati DesertX (2022-2025) comes straight from the Ducabike compatibility data for TRS01. Take a moment to compare the year of your DesertX with 2022-2025 before ordering TRS01. Bikes imported from other markets may be designated differently, so compare your papers with Ducati DesertX. You will also find reference TRS01 for Ducati Diavel, Ducati Diavel 1260, Ducati Diavel 1260 S, Ducati Diavel V4, with a dedicated listing for every motorcycle. The Ducabike reference TRS01 identifies this part and helps avoid mix-ups between similar items.\u003c\/p\u003e\u003ch2\u003eCleaning and Upkeep\u003c\/h2\u003e\u003cp\u003eStrong alkaline or acidic cleaners are not suitable for the anodised finish of TRS01. Spilled brake fluid should never be left, because it can damage paintwork within a short time. Everyday riding is no problem for TRS01; a regular wipe keeps the part looking good.\u003c\/p\u003e\u003ch2\u003eInstallation and Scope of Delivery\u003c\/h2\u003e\u003cp\u003eReference TRS01 arrives ready to fit and takes the place of the original part over the left end of the front wheel axle. Fitting TRS01 over the left end of the front wheel axle is a matter of exchanging parts, not modifying the motorcycle. A single billet part replaces the original part; that is the full scope of supply. Tighten the fixings of TRS01 evenly and with feeling, as aluminium threads deserve care. Fitting the Ducabike part needs care more than special skill.\u003c\/p\u003e\u003ch2\u003eRules for Road Use\u003c\/h2\u003e\u003cp\u003eThis part is supplied without an ABE and without an expert report. Swapping the original part is a modification, and national law decides what is allowed on the road. Some countries treat a change from the original part to an aftermarket part as a modification that must be checked.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Ducabike\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e TRS01\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Billet aluminium, machined from solid\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Coloured anodising\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Red, gold and black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati DesertX (2022-2025)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ducabike","offers":[{"title":"Anodised Black","offer_id":54107936096522,"sku":"TRS01D","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Red","offer_id":54107936030986,"sku":"TRS01A","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Gold","offer_id":54107936063754,"sku":"TRS01B","price":16.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ducabike-trs01d_1.png?v=1794416568"},{"product_id":"ducabike-left-front-wheel-cap-ducati-diavel-2011-2018-trs01","title":"Ducabike Left Front Wheel Cap Ducati Diavel (2011-2018) – TRS01","description":"\u003cp\u003eItalian-made reference TRS01 from Ducabike is meant for the Ducati Diavel (2011-2018), where it stands in for the original part. The change is about looks and feel: a colour accent over the left end of the front wheel axle that ties in with the rest of the Diavel. Think of TRS01 as a finishing touch for the Ducati Diavel, placed over the left end of the front wheel axle where the eye tends to land.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMachined from solid billet aluminium\u003c\/li\u003e\n\u003cli\u003eAnodised finish in red, gold and black\u003c\/li\u003e\n\u003cli\u003eSupplied as a single part\u003c\/li\u003e\n\u003cli\u003eFits in place of the original part\u003c\/li\u003e\n\u003cli\u003eMade to fit the Ducati Diavel (2011-2018)\u003c\/li\u003e\n\u003cli\u003eDesigned and made in Italy by Ducabike (DBK Special Parts)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eModel and Year Check\u003c\/h2\u003e\u003cp\u003eDucabike names the Ducati Diavel built 2011-2018 for TRS01, and this product page covers exactly that motorcycle. Versions of the Diavel that look alike may still differ underneath, so confirm that yours is the Ducati Diavel. If the year on your papers does not fall within 2011-2018, this Diavel listing is not the one you need. Ducabike's list shows TRS01 for Ducati DesertX, Ducati Diavel 1260, Ducati Diavel 1260 S, Ducati Diavel V4 as well, and Inter-Pace lists every one of these bikes on its own page. Inter-Pace can confirm the Ducabike listing for TRS01 on request.\u003c\/p\u003e\u003ch2\u003eFitting the Part\u003c\/h2\u003e\u003cp\u003eNo machining or painting is needed, since TRS01 is supplied finished and ready to fit. Delivered ready to install, the part is fitted over the left end of the front wheel axle in place of the original part. For the motorcycle, Ducabike packs TRS01 as one single billet piece. Avoid unprotected pliers on the anodised surface of TRS01, as they leave marks on the part. Do not overtighten the fixings of TRS01; aluminium deserves a careful hand.\u003c\/p\u003e\u003ch2\u003eMade by Ducabike in Italy\u003c\/h2\u003e\u003cp\u003eReference TRS01 starts as a block of aluminium that Ducabike mills down to shape. Italian production and billet aluminium are the two basics of the Ducabike left front wheel cap. A part made from billet, such as TRS01, keeps its precise fit through everyday riding. The machined surface reflects light differently from moulded parts, which adds depth to the look.\u003c\/p\u003e\u003ch2\u003eFinding the Right Colour\u003c\/h2\u003e\u003cp\u003eMatched to the rest, the colour of TRS01 (red, gold and black) becomes part of a coordinated look.\u003c\/p\u003e\u003ch2\u003eCleaning and Upkeep\u003c\/h2\u003e\u003cp\u003eNever use scouring pads or wire brushes on TRS01, because they scratch the anodised surface. Keep a cloth to hand when working, so any brake fluid can be removed straight away. Riding in all weathers is fine, as long as the bike is cleaned and dried afterwards.\u003c\/p\u003e\u003ch2\u003eRoad Approval\u003c\/h2\u003e\u003cp\u003eInter-Pace cannot provide an ABE for the part, because Ducabike does not issue one. Since TRS01 replaces the original part, check what your national rules say before using the bike on public roads. Before road use, find out whether your national rules allow TRS01 in place of the original part.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Ducabike\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e TRS01\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Billet aluminium, machined from solid\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Coloured anodising\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Red, gold and black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Diavel (2011-2018)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ducabike","offers":[{"title":"Anodised Black","offer_id":54107936489738,"sku":"TRS01D","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Red","offer_id":54107936424202,"sku":"TRS01A","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Gold","offer_id":54107936456970,"sku":"TRS01B","price":16.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ducabike-trs01d_1.png?v=1794416568"},{"product_id":"ducabike-left-front-wheel-cap-ducati-diavel-1260-2019-2022-trs01","title":"Ducabike Left Front Wheel Cap Ducati Diavel 1260 (2019-2022) – TRS01","description":"\u003cp\u003eWe stock the Ducabike left front wheel cap TRS01 for the Ducati Diavel 1260 (2019-2022), machined from billet aluminium in Italy. Fitted over the left end of the front wheel axle, reference TRS01 turns a functional spot on the Diavel 1260 into a visible detail in anodised aluminium. This is a cosmetic and quality upgrade for the Ducati Diavel 1260: same function as the original part, but in machined, anodised aluminium.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSolid-machined aluminium construction\u003c\/li\u003e\n\u003cli\u003eAnodised finish in red, gold and black\u003c\/li\u003e\n\u003cli\u003eOne part in the box\u003c\/li\u003e\n\u003cli\u003eFits in place of the original part\u003c\/li\u003e\n\u003cli\u003eMade to fit the Ducati Diavel 1260 (2019-2022)\u003c\/li\u003e\n\u003cli\u003eMade in Italy by Ducabike\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitting the Part\u003c\/h2\u003e\u003cp\u003eDucabike designs TRS01 to replace the original part over the left end of the front wheel axle, using the existing mounting. Everything about TRS01 is finished in Italy, so you only exchange it for the original part. Reference TRS01 is supplied as a single, ready-to-fit piece. Simple as the job is, patience and attention still pay off when fitting the left front wheel cap. Park the bike securely, ideally on a stand, before you begin the swap.\u003c\/p\u003e\u003ch2\u003eLooking After Anodised Aluminium\u003c\/h2\u003e\u003cp\u003eFor anodised parts like TRS01, gentle products protect the colour better than aggressive cleaners. Fluids such as oil or fuel should not be left on the left front wheel cap; a quick wipe is enough. Before topping up a reservoir, cover the surrounding parts with a cloth.\u003c\/p\u003e\u003ch2\u003eCompatible Motorcycle\u003c\/h2\u003e\u003cp\u003eWe took the fitment of TRS01 directly from Ducabike, which names the Ducati Diavel 1260 (2019-2022). Where the Diavel 1260 name covers several versions, the model years 2019-2022 help to tell them apart. Not sure which Diavel 1260 you own? The registration certificate states the model and year details. Ducabike uses one part number, TRS01, for Ducati DesertX, Ducati Diavel, Ducati Diavel 1260 S, Ducati Diavel V4 and the bike on this page. The reference TRS01 is the safest way to identify this Ducabike part when comparing with other sources.\u003c\/p\u003e\u003ch2\u003eBillet Aluminium from Italy\u003c\/h2\u003e\u003cp\u003eDucabike produces the left front wheel cap in Italy, machining every piece from billet aluminium. Ducabike's billet process starts with a solid aluminium block and ends with a finished, anodised part. A stable, accurately machined part like TRS01 keeps the bike looking sharp long after the first ride. On closer inspection you notice the finish quality Ducabike gives the left front wheel cap.\u003c\/p\u003e\u003ch2\u003eColour Matching\u003c\/h2\u003e\u003cp\u003eIf you plan further Ducabike parts later, choosing the same colour for TRS01 now keeps the look consistent.\u003c\/p\u003e\u003ch2\u003eRoad Approval\u003c\/h2\u003e\u003cp\u003eApproval status of TRS01: no ABE, no parts certificate, no expert report from Ducabike. Track use is a separate matter; for public roads, the regulations of your country apply. In some countries even cosmetic parts such as TRS01 must meet specific rules, so please inform yourself.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Ducabike\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e TRS01\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Billet aluminium, machined from solid\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Coloured anodising\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Red, gold and black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Diavel 1260 (2019-2022)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ducabike","offers":[{"title":"Anodised Black","offer_id":54107936751882,"sku":"TRS01D","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Red","offer_id":54107936686346,"sku":"TRS01A","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Gold","offer_id":54107936719114,"sku":"TRS01B","price":16.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ducabike-trs01d_1.png?v=1794416568"},{"product_id":"ducabike-left-front-wheel-cap-ducati-diavel-1260-s-2019-2022-trs01","title":"Ducabike Left Front Wheel Cap Ducati Diavel 1260 S (2019-2022) – TRS01","description":"\u003cp\u003eDucabike, the Italian parts maker also trading as DBK Special Parts, lists the Left Front Wheel Cap TRS01 for the Ducati Diavel 1260 S (2019-2022). Where the Ducati Diavel 1260 S had the original part, it now carries a part with crisp machined edges and an even anodised surface. The Ducati Diavel 1260 S keeps its factory mounting points, while TRS01 replaces the plain stock look with milled aluminium.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSolid-machined aluminium construction\u003c\/li\u003e\n\u003cli\u003eColour choice: red, gold and black\u003c\/li\u003e\n\u003cli\u003eSupplied as a single part\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the original part\u003c\/li\u003e\n\u003cli\u003eFitment per Ducabike: Ducati Diavel 1260 S, 2019-2022\u003c\/li\u003e\n\u003cli\u003eDesigned and made in Italy by Ducabike (DBK Special Parts)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eChecking Your Bike\u003c\/h2\u003e\u003cp\u003eFor the Ducati Diavel 1260 S (2019-2022), the Ducabike compatibility list gives reference TRS01. Should your motorcycle have been modified, compare it closely with a standard Ducati Diavel 1260 S before ordering. Model years matter: TRS01 is listed for 2019-2022, and a different year of the Diavel 1260 S may need another part. Ducabike's list shows TRS01 for Ducati DesertX, Ducati Diavel, Ducati Diavel 1260, Ducati Diavel V4 as well, and Inter-Pace lists every one of these bikes on its own page. Is your motorcycle modified or imported? Then ask Inter-Pace about TRS01 before you order.\u003c\/p\u003e\u003ch2\u003eLooking After Anodised Aluminium\u003c\/h2\u003e\u003cp\u003eAcidic rim cleaners and strong degreasers are not suitable for anodised aluminium. Store the motorcycle under cover in winter to keep TRS01 and the rest of the bike in good shape. After wet rides or salted roads, rinse the bike and dry the anodised parts, including TRS01.\u003c\/p\u003e\u003ch2\u003ePick Your Shade\u003c\/h2\u003e\u003cp\u003eThe available finish for TRS01 is red, gold and black, shown in the selection on this page.\u003c\/p\u003e\u003ch2\u003eReady to Fit\u003c\/h2\u003e\u003cp\u003eThe Ducabike left front wheel cap uses the existing mounting over the left end of the front wheel axle, with no changes to the bike. Take off the original part, clean the area and fit TRS01 there instead. A single billet part replaces the original part; that is the full scope of supply. Handle the anodised surface of TRS01 gently, as metal tools can leave scratches. Work carefully around painted surfaces and protect them with a cloth while fitting the part.\u003c\/p\u003e\u003ch2\u003eMachined from the Solid\u003c\/h2\u003e\u003cp\u003eAluminium machined from the solid is the material of choice for reference TRS01. Ducabike, known today also under the name DBK Special Parts, works the part from solid aluminium. Whether the bike wears more Ducabike parts or none, TRS01 blends in as a coherent detail. Sturdy billet construction means TRS01 copes with regular cleaning and handling without losing its shape.\u003c\/p\u003e\u003ch2\u003eRoad Use Notes\u003c\/h2\u003e\u003cp\u003eFor TRS01, there is no general operating permit and no expert opinion from Ducabike. Responsibility for road use with TRS01 lies with the rider, so take a moment to check local law. Rules for parts that take the place of the original part differ from country to country, so check before riding the bike.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Ducabike\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e TRS01\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Billet aluminium, machined from solid\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Coloured anodising\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Red, gold and black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Diavel 1260 S (2019-2022)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ducabike","offers":[{"title":"Anodised Black","offer_id":54107937145098,"sku":"TRS01D","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Red","offer_id":54107937079562,"sku":"TRS01A","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Gold","offer_id":54107937112330,"sku":"TRS01B","price":16.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ducabike-trs01d_1.png?v=1794416568"},{"product_id":"ducabike-left-front-wheel-cap-ducati-diavel-v4-2023-2026-trs01","title":"Ducabike Left Front Wheel Cap Ducati Diavel V4 (2023-2026) – TRS01","description":"\u003cp\u003eDucabike, the Italian parts maker also trading as DBK Special Parts, lists the Left Front Wheel Cap TRS01 for the Ducati Diavel V4 (2023-2026). On a well-kept Ducati Diavel V4, small details like TRS01 are what set it apart from a standard machine. Fitted over the left end of the front wheel axle, reference TRS01 turns a functional spot on the Diavel V4 into a visible detail in anodised aluminium.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBillet aluminium, machined from a solid block\u003c\/li\u003e\n\u003cli\u003eSupplied as a single part\u003c\/li\u003e\n\u003cli\u003eAvailable anodised in red, gold and black\u003c\/li\u003e\n\u003cli\u003eReplaces the original part, no modifications needed\u003c\/li\u003e\n\u003cli\u003eSpecific fitment: Ducati Diavel V4 (2023-2026)\u003c\/li\u003e\n\u003cli\u003eDesigned and made in Italy by Ducabike (DBK Special Parts)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitting Notes\u003c\/h2\u003e\u003cp\u003eDelivered ready for installation, TRS01 needs only the removal of the original part. The Ducabike left front wheel cap uses the existing mounting over the left end of the front wheel axle, with no changes to the bike. For the motorcycle, Ducabike packs TRS01 as one single billet piece. A workshop familiar is the right place if you prefer not to do the work yourself. Standard hand tools are usually enough to fit TRS01.\u003c\/p\u003e\u003ch2\u003eLong-Term Care\u003c\/h2\u003e\u003cp\u003eDry the left front wheel cap with a soft microfibre cloth to avoid water spots on the anodised finish. Riding in all weathers is fine, as long as the bike is cleaned and dried afterwards. Leaning a helmet or keys against TRS01 can leave marks, so give the part some space.\u003c\/p\u003e\u003ch2\u003eAnodised Colour Choice\u003c\/h2\u003e\u003cp\u003eContrast or match: with red, gold and black on offer, TRS01 can stand out or blend in.\u003c\/p\u003e\u003ch2\u003eModel and Year Check\u003c\/h2\u003e\u003cp\u003eDucabike designates the Ducati Diavel V4 (2023-2026) as the fitting motorcycle for TRS01. A different production year of the Ducati Diavel V4 can mean a different part, even if the bikes look alike. For other model years of the Diavel V4, look for the matching product page rather than this one. According to Ducabike, the billet piece TRS01 also belongs on Ducati DesertX, Ducati Diavel, Ducati Diavel 1260, Ducati Diavel 1260 S, which we list one by one. Check the reference TRS01 against the Ducabike list if you are comparing parts for several bikes besides the bike.\u003c\/p\u003e\u003ch2\u003eBillet Construction\u003c\/h2\u003e\u003cp\u003eMachined rather than moulded: reference TRS01 is solid aluminium from the core to the surface. Reference TRS01 is machined aluminium through and through, with no plastic core underneath. Billet parts like TRS01 tend to age well, as solid aluminium does not warp like plastic. The surface quality of TRS01 shows up close, and that is exactly where riders look.\u003c\/p\u003e\u003ch2\u003eLegal Notes\u003c\/h2\u003e\u003cp\u003eFor TRS01, there is no general operating permit and no expert opinion from Ducabike. Ask your local testing station if you are unsure whether TRS01 is permitted on the road. Regulations differ between countries, and only the local authorities can give a binding answer.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Ducabike\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e TRS01\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Billet aluminium, machined from solid\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Coloured anodising\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Red, gold and black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Diavel V4 (2023-2026)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ducabike","offers":[{"title":"Anodised Black","offer_id":54107937472778,"sku":"TRS01D","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Red","offer_id":54107937407242,"sku":"TRS01A","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Gold","offer_id":54107937440010,"sku":"TRS01B","price":16.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ducabike-trs01d_1.png?v=1794416568"},{"product_id":"ducabike-left-front-wheel-cap-ducati-hypermotard-821-2013-2015-trs01","title":"Ducabike Left Front Wheel Cap Ducati Hypermotard 821 (2013-2015) – TRS01","description":"\u003cp\u003eAs billet work from Ducabike, reference TRS01 (left front wheel cap) is matched to the Hypermotard 821 built 2013-2015. Small details decide how finished the Hypermotard 821 looks, and reference TRS01 sits right where you see it. Compared with the original part, the billet part from Ducabike brings sharper lines and a deeper colour to the Ducati Hypermotard 821.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSolid-machined aluminium construction\u003c\/li\u003e\n\u003cli\u003eOne part in the box\u003c\/li\u003e\n\u003cli\u003eAnodised finish in red, gold and black\u003c\/li\u003e\n\u003cli\u003eReplaces the original part, no modifications needed\u003c\/li\u003e\n\u003cli\u003eSpecific fitment: Ducati Hypermotard 821 (2013-2015)\u003c\/li\u003e\n\u003cli\u003eMade in Italy by Ducabike\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eThe Aluminium Behind the Part\u003c\/h2\u003e\u003cp\u003eLight alloy, worked from the solid in Italy, forms the body of TRS01. Italian production and billet aluminium are the two basics of the Ducabike left front wheel cap. A part made from billet, such as TRS01, keeps its precise fit through everyday riding. Solid aluminium and careful finishing give the part a quality you notice each time you walk past the bike.\u003c\/p\u003e\u003ch2\u003eMounting and Delivery\u003c\/h2\u003e\u003cp\u003eEverything about TRS01 is finished in Italy, so you only exchange it for the original part. Installation follows a simple logic: out with the original part, in with TRS01. Reference TRS01 is supplied as a single, ready-to-fit piece. Work carefully around painted surfaces and protect them with a cloth while fitting the part. Use well-fitting tools so the fixings and the anodised surface of TRS01 stay unmarked.\u003c\/p\u003e\u003ch2\u003eCompatible Motorcycle\u003c\/h2\u003e\u003cp\u003eFit on the Ducati Hypermotard 821 (2013-2015) is stated by Ducabike for TRS01. Your dealer or the vehicle papers can confirm that you ride the Ducati Hypermotard 821 (2013-2015). Checking the chassis details of your Hypermotard 821 is a reliable way to confirm the right listing. Also compatible with TRS01, according to Ducabike: Ducati DesertX, Ducati Diavel, Ducati Diavel 1260, Ducati Diavel 1260 S, each on its own product page. Inter-Pace answers fitment questions before you order, so you can buy with confidence.\u003c\/p\u003e\u003ch2\u003eLong-Term Care\u003c\/h2\u003e\u003cp\u003eSolvent-based products can stain anodised surfaces, so test any new cleaner on a hidden spot before using it. Fluids such as oil or fuel should not be left on the left front wheel cap; a quick wipe is enough. Regular washing keeps TRS01 looking as good as the day it was fitted.\u003c\/p\u003e\u003ch2\u003eColour and Finish\u003c\/h2\u003e\u003cp\u003eA matching colour on brake levers, caps or covers makes TRS01 look like part of a planned set.\u003c\/p\u003e\u003ch2\u003eLocal Regulations\u003c\/h2\u003e\u003cp\u003eNo ABE or expert report is supplied by Ducabike with TRS01. Regulations differ between countries, and only the local authorities can give a binding answer. In some countries even cosmetic parts such as TRS01 must meet specific rules, so please inform yourself.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Ducabike\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e TRS01\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Billet aluminium, machined from solid\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Coloured anodising\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Red, gold and black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Hypermotard 821 (2013-2015)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ducabike","offers":[{"title":"Anodised Black","offer_id":54107937931530,"sku":"TRS01D","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Red","offer_id":54107937865994,"sku":"TRS01A","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Gold","offer_id":54107937898762,"sku":"TRS01B","price":16.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ducabike-trs01d_1.png?v=1794416568"},{"product_id":"ducabike-left-front-wheel-cap-ducati-hypermotard-939-2016-2018-trs01","title":"Ducabike Left Front Wheel Cap Ducati Hypermotard 939 (2016-2018) – TRS01","description":"\u003cp\u003eFrom the Ducabike range for the Ducati Hypermotard 939 (2016-2018), we offer the left front wheel cap with part number TRS01. The change is about looks and feel: a colour accent over the left end of the front wheel axle that ties in with the rest of the Hypermotard 939. A stock part does its job, and the Ducabike version does the same job on the Ducati Hypermotard 939 with more visual care.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMachined from solid billet aluminium\u003c\/li\u003e\n\u003cli\u003eOne part in the box\u003c\/li\u003e\n\u003cli\u003eColour choice: red, gold and black\u003c\/li\u003e\n\u003cli\u003eFits in place of the original part\u003c\/li\u003e\n\u003cli\u003eMade to fit the Ducati Hypermotard 939 (2016-2018)\u003c\/li\u003e\n\u003cli\u003eMade in Italy by Ducabike\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSwapping the Original Part\u003c\/h2\u003e\u003cp\u003eOn the bike, the Ducabike part simply goes in where the original part came off, over the left end of the front wheel axle. Where the original part sat before, reference TRS01 now takes over. One piece is included in the delivery: the Ducabike part. Should anything not line up as expected, stop and ask a workshop rather than forcing TRS01 into place. Lay a soft cloth over painted areas nearby before you start the swap.\u003c\/p\u003e\u003ch2\u003eCare and Everyday Use\u003c\/h2\u003e\u003cp\u003eAggressive wheel cleaners and acidic products can damage anodising, so keep them away from TRS01. With occasional cleaning, the anodised colour of TRS01 lasts through many riding seasons. Keep a cloth to hand when working, so any brake fluid can be removed straight away.\u003c\/p\u003e\u003ch2\u003eCompatible Motorcycle\u003c\/h2\u003e\u003cp\u003eModel years 2016-2018 of the Ducati Hypermotard 939 are covered by reference TRS01, according to Ducabike. If your Hypermotard 939 falls outside 2016-2018, the fit of TRS01 cannot be assumed. Not sure which Hypermotard 939 you own? The registration certificate states the model and year details. Physically the same TRS01 is catalogued for Ducati DesertX, Ducati Diavel, Ducati Diavel 1260, Ducati Diavel 1260 S; look for the page that carries your bike name. Have the model and year ready when you contact Inter-Pace about TRS01.\u003c\/p\u003e\u003ch2\u003eFinding the Right Colour\u003c\/h2\u003e\u003cp\u003eIf your motorcycle already carries anodised parts, pick the shade of TRS01 that ties them together: red, gold and black.\u003c\/p\u003e\u003ch2\u003eBillet Construction\u003c\/h2\u003e\u003cp\u003eDucabike is an Italian manufacturer, today also trading as DBK Special Parts, and produces TRS01 in Italy. Billet aluminium gives TRS01 a solid feel in the hand, and that quality carries over to the look. Fit and finish of TRS01 are made to suit the factory design lines. Reference TRS01 is shaped to follow the original design lines, so it does not look like an add-on.\u003c\/p\u003e\u003ch2\u003eLocal Regulations\u003c\/h2\u003e\u003cp\u003eAs far as approval is concerned, TRS01 has no paperwork from Ducabike. Track use is a separate matter; for public roads, the regulations of your country apply. Because TRS01 takes the place of the original part, the rules of your country decide on road use.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Ducabike\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e TRS01\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Billet aluminium, machined from solid\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Coloured anodising\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Red, gold and black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Hypermotard 939 (2016-2018)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ducabike","offers":[{"title":"Anodised Black","offer_id":54107938259210,"sku":"TRS01D","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Red","offer_id":54107938193674,"sku":"TRS01A","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Gold","offer_id":54107938226442,"sku":"TRS01B","price":16.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ducabike-trs01d_1.png?v=1794416568"},{"product_id":"ducabike-left-front-wheel-cap-ducati-hypermotard-950-2019-2025-trs01","title":"Ducabike Left Front Wheel Cap Ducati Hypermotard 950 (2019-2025) – TRS01","description":"\u003cp\u003eDucabike designed reference TRS01 (left front wheel cap) in billet aluminium for the Hypermotard 950 built 2019-2025. Owners who care about detail will see the point of TRS01 on the Hypermotard 950 the first time they walk up to it. Fitted over the left end of the front wheel axle, reference TRS01 turns a functional spot on the Hypermotard 950 into a visible detail in anodised aluminium.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMachined from solid billet aluminium\u003c\/li\u003e\n\u003cli\u003eOne part in the box\u003c\/li\u003e\n\u003cli\u003eColour choice: red, gold and black\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the original part\u003c\/li\u003e\n\u003cli\u003eSpecific fitment: Ducati Hypermotard 950 (2019-2025)\u003c\/li\u003e\n\u003cli\u003eMade in Italy by Ducabike\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatible Motorcycle\u003c\/h2\u003e\u003cp\u003eGoing by the fitment data Ducabike publishes, code TRS01 belongs on the Ducati Hypermotard 950 (2019-2025). Checking the chassis details of your Hypermotard 950 is a reliable way to confirm the right listing. A different production year of the Ducati Hypermotard 950 can mean a different part, even if the bikes look alike. Reference TRS01 is not exclusive to one motorcycle: Ducabike also names Ducati DesertX, Ducati Diavel, Ducati Diavel 1260, Ducati Diavel 1260 S. Is your motorcycle modified or imported? Then ask Inter-Pace about TRS01 before you order.\u003c\/p\u003e\u003ch2\u003eLooking After Anodised Aluminium\u003c\/h2\u003e\u003cp\u003eAcidic rim cleaners and strong degreasers are not suitable for anodised aluminium. Regular washing keeps TRS01 looking as good as the day it was fitted. Keep a cloth to hand when working, so any brake fluid can be removed straight away.\u003c\/p\u003e\u003ch2\u003eColour Options\u003c\/h2\u003e\u003cp\u003eColour choice for the left front wheel cap depends on taste, paintwork and any parts you have fitted already.\u003c\/p\u003e\u003ch2\u003eMaterial Details\u003c\/h2\u003e\u003cp\u003eDucabike, known today also under the name DBK Special Parts, works the part from solid aluminium. Light alloy milled from the solid is what Ducabike uses for the Left Front Wheel Cap, reference TRS01. Aluminium that has been machined accurately does not deform in normal use. Even next to factory components with a high-quality finish, the left front wheel cap holds its own.\u003c\/p\u003e\u003ch2\u003eWhat Is in the Box\u003c\/h2\u003e\u003cp\u003eBecause the part is supplied ready to fit, the work is limited to swapping out the original part. Straight from the box, reference TRS01 is ready to replace the original part. Included is one anodised aluminium part, reference TRS01. If you are unsure about fitting TRS01, a specialist workshop can install it for you. Avoid unprotected pliers on the anodised surface of TRS01, as they leave marks on the part.\u003c\/p\u003e\u003ch2\u003eApproval and Local Rules\u003c\/h2\u003e\u003cp\u003eFrom Ducabike, TRS01 comes with neither ABE nor parts certificate nor any test report. Responsibility for road use with TRS01 lies with the rider, so take a moment to check local law. A local inspection body can tell you whether TRS01 needs to be registered or inspected.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Ducabike\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e TRS01\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Billet aluminium, machined from solid\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Coloured anodising\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Red, gold and black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Hypermotard 950 (2019-2025)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ducabike","offers":[{"title":"Anodised Black","offer_id":54107938586890,"sku":"TRS01D","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Red","offer_id":54107938521354,"sku":"TRS01A","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Gold","offer_id":54107938554122,"sku":"TRS01B","price":16.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ducabike-trs01d_1.png?v=1794416568"},{"product_id":"ducabike-left-front-wheel-cap-ducati-hypermotard-950-rve-2021-2025-trs01","title":"Ducabike Left Front Wheel Cap Ducati Hypermotard 950 RVE (2021-2025) – TRS01","description":"\u003cp\u003eShould your garage hold the Ducati Hypermotard 950 RVE (2021-2025), Ducabike reference TRS01 swaps the original part for billet aluminium. Nothing about how the Hypermotard 950 RVE rides changes; what changes is the quality of the detail over the left end of the front wheel axle. Upgrading the original part to billet aluminium is a modest change for the Ducati Hypermotard 950 RVE, yet one you see every day.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBillet aluminium, machined from a solid block\u003c\/li\u003e\n\u003cli\u003eAvailable anodised in red, gold and black\u003c\/li\u003e\n\u003cli\u003eSupplied as a single part\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the original part\u003c\/li\u003e\n\u003cli\u003eMade to fit the Ducati Hypermotard 950 RVE (2021-2025)\u003c\/li\u003e\n\u003cli\u003eDesigned and made in Italy by Ducabike (DBK Special Parts)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFinding the Right Colour\u003c\/h2\u003e\u003cp\u003eAnodised colours look different in daylight and in the garage, so the product photos are a useful guide.\u003c\/p\u003e\u003ch2\u003eReady to Fit\u003c\/h2\u003e\u003cp\u003eReference TRS01 comes finished and anodised, ready to take the place of the original part. Delivered ready to install, the part is fitted over the left end of the front wheel axle in place of the original part. The box contains one Ducabike part, reference TRS01, in the colour you selected. Take your time, as a careful swap protects both the new part and the surrounding components. Fitting TRS01 is straightforward for anyone used to basic work.\u003c\/p\u003e\u003ch2\u003eCare and Maintenance\u003c\/h2\u003e\u003cp\u003eFor the part, gentle cleaning works better than strong chemicals. Avoid resting tools or keys on TRS01, as hard objects can mark the anodised surface of the part. A wax or protective spray for motorcycles should be tested on a small area before it touches TRS01.\u003c\/p\u003e\u003ch2\u003eModel Years Covered\u003c\/h2\u003e\u003cp\u003eOn the Ducabike list, TRS01 appears for the Ducati Hypermotard 950 RVE with model years 2021-2025. Comparing your bike with Ducati Hypermotard 950 RVE and 2021-2025 takes little time and avoids returns. Look at your vehicle documents and confirm that both the model, Ducati Hypermotard 950 RVE, and the year match. Separate pages for TRS01 exist for the following as well: Ducati DesertX, Ducati Diavel, Ducati Diavel 1260, Ducati Diavel 1260 S. Getting the right part first time is easier with the reference to hand: TRS01.\u003c\/p\u003e\u003ch2\u003eBillet Construction\u003c\/h2\u003e\u003cp\u003eBehind the brand Ducabike stands an Italian specialist in machined aluminium motorcycle parts, the maker of TRS01. Ducabike, known today also under the name DBK Special Parts, works the part from solid aluminium. Clean edges give the part a finish that looks deliberate rather than mass-produced. A part made from billet, such as TRS01, keeps its precise fit through everyday riding.\u003c\/p\u003e\u003ch2\u003eRoad Use and Approval\u003c\/h2\u003e\u003cp\u003ePlease note that TRS01 is supplied without any approval documents. Some countries treat a change from the original part to an aftermarket part as a modification that must be checked. Track use is a separate matter; for public roads, the regulations of your country apply.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Ducabike\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e TRS01\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Billet aluminium, machined from solid\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Coloured anodising\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Red, gold and black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Hypermotard 950 RVE (2021-2025)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ducabike","offers":[{"title":"Anodised Black","offer_id":54107938849034,"sku":"TRS01D","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Red","offer_id":54107938783498,"sku":"TRS01A","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Gold","offer_id":54107938816266,"sku":"TRS01B","price":16.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ducabike-trs01d_1.png?v=1794416568"},{"product_id":"ducabike-left-front-wheel-cap-ducati-hypermotard-950-sp-2019-2025-trs01","title":"Ducabike Left Front Wheel Cap Ducati Hypermotard 950 SP (2019-2025) – TRS01","description":"\u003cp\u003eThis page covers the Ducabike Left Front Wheel Cap TRS01, listed for one motorcycle only: the Ducati Hypermotard 950 SP (2019-2025). Mechanically the Hypermotard 950 SP stays as it was; visually, machined aluminium takes over from the original part over the left end of the front wheel axle. Function stays the same as with the original part, while the Hypermotard 950 SP gains Italian billet craftsmanship in plain sight.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBillet aluminium, machined from a solid block\u003c\/li\u003e\n\u003cli\u003eSupplied as a single part\u003c\/li\u003e\n\u003cli\u003eColour choice: red, gold and black\u003c\/li\u003e\n\u003cli\u003eFits in place of the original part\u003c\/li\u003e\n\u003cli\u003eMade to fit the Ducati Hypermotard 950 SP (2019-2025)\u003c\/li\u003e\n\u003cli\u003eMade in Italy by Ducabike\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eColours Available\u003c\/h2\u003e\u003cp\u003eSubtle or striking: the colour you choose for the left front wheel cap (red, gold and black) sets the tone of the detail.\u003c\/p\u003e\u003ch2\u003eCleaning Tips\u003c\/h2\u003e\u003cp\u003eScratchy sponges and steel wool leave marks on anodised surfaces, so avoid them completely. Spilled brake fluid should never be left, because it can damage paintwork within a short time. Check TRS01 now and then for dirt building up around its edges.\u003c\/p\u003e\u003ch2\u003eMade by Ducabike in Italy\u003c\/h2\u003e\u003cp\u003eReference TRS01 is machined aluminium through and through, with no plastic core underneath. Ducabike chooses billet aluminium for TRS01 because it can be machined precisely and keeps its form. Reference TRS01 is shaped to follow the original design lines, so it does not look like an add-on. A stable, accurately machined part like TRS01 keeps the machine looking sharp long after the first ride.\u003c\/p\u003e\u003ch2\u003eMounting and Delivery\u003c\/h2\u003e\u003cp\u003eDelivered ready to install, the part is fitted over the left end of the front wheel axle in place of the original part. Everything about TRS01 is finished in Italy, so you only exchange it for the original part. Ducabike supplies TRS01 individually, as one part. Do not overtighten the fixings of TRS01; aluminium deserves a careful hand. Check the fit of TRS01 after the first rides and retighten if needed.\u003c\/p\u003e\u003ch2\u003eCompatibility Details\u003c\/h2\u003e\u003cp\u003eFitment for the Ducati Hypermotard 950 SP (2019-2025) comes straight from the Ducabike compatibility data for TRS01. Not sure which Hypermotard 950 SP you own? The registration certificate states the model and year details. Facelift versions of the Hypermotard 950 SP sometimes change small details, so the year range 2019-2025 matters. Is your motorcycle in this list: Ducati DesertX, Ducati Diavel, Ducati Diavel 1260, Ducati Diavel 1260 S? Then choose the page that carries its name; the reference stays TRS01. Write to Inter-Pace with your model, year and the reference TRS01 if you need a second opinion.\u003c\/p\u003e\u003ch2\u003eApproval and Local Rules\u003c\/h2\u003e\u003cp\u003eThere is no approval document from Ducabike for the part, so none is included. Inter-Pace cannot give legal advice for your country, but a testing organisation can tell you whether TRS01 is acceptable. Some countries treat a change from the original part to an aftermarket part as a modification that must be checked.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Ducabike\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e TRS01\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Billet aluminium, machined from solid\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Coloured anodising\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Red, gold and black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Hypermotard 950 SP (2019-2025)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ducabike","offers":[{"title":"Anodised Black","offer_id":54107939045642,"sku":"TRS01D","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Red","offer_id":54107938980106,"sku":"TRS01A","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Gold","offer_id":54107939012874,"sku":"TRS01B","price":16.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ducabike-trs01d_1.png?v=1794416568"},{"product_id":"ducabike-left-front-wheel-cap-ducati-hyperstrada-821-2013-2015-trs01","title":"Ducabike Left Front Wheel Cap Ducati Hyperstrada 821 (2013-2015) – TRS01","description":"\u003cp\u003eYou are looking at the Ducabike Left Front Wheel Cap for the Ducati Hyperstrada 821 (2013-2015), sold under part number TRS01. In place of the original part, the Hyperstrada 821 now shows anodised billet aluminium over the left end of the front wheel axle. On the Hyperstrada 821, the stock part can look plain; the anodised Ducabike part gives the spot where the original part sat a finished, deliberate appearance.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBillet aluminium, machined from a solid block\u003c\/li\u003e\n\u003cli\u003eAvailable anodised in red, gold and black\u003c\/li\u003e\n\u003cli\u003eSupplied as a single part\u003c\/li\u003e\n\u003cli\u003eReplaces the original part, no modifications needed\u003c\/li\u003e\n\u003cli\u003eSpecific fitment: Ducati Hyperstrada 821 (2013-2015)\u003c\/li\u003e\n\u003cli\u003eMade in Italy by Ducabike\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eLooking After the Finish\u003c\/h2\u003e\u003cp\u003eKeep polishing compounds away from TRS01, as they can wear away the anodised colour. With simple, regular care, the anodised finish keeps its colour for a long time. Road salt in winter should be rinsed off promptly, from TRS01 as well as from the whole bike.\u003c\/p\u003e\u003ch2\u003eConstruction and Material Quality\u003c\/h2\u003e\u003cp\u003eMade in Italy: Ducabike produces the billet left front wheel cap in its home country. DBK Special Parts is the brand name Ducabike also uses today; reference TRS01 is made in Italy either way. Over time, form-stable aluminium means that the part stays straight and true. Clean edges give the part a finish that looks deliberate rather than mass-produced.\u003c\/p\u003e\u003ch2\u003eSwapping the Original Part\u003c\/h2\u003e\u003cp\u003eReference TRS01 comes finished and anodised, ready to take the place of the original part. Fitting is a direct swap: remove the original part and install TRS01 in the same position. One machined part is what you get with TRS01, enough to take the place of the original part. Clean the mounting area before fitting TRS01, so dirt does not get trapped underneath. Basic hand tools in good condition are normally all you need to fit TRS01.\u003c\/p\u003e\u003ch2\u003eFitment Check\u003c\/h2\u003e\u003cp\u003eWe took the fitment of TRS01 directly from Ducabike, which names the Ducati Hyperstrada 821 (2013-2015). This page is for the Ducati Hyperstrada 821 only; other models need their own listing. Fitment is tied to the Ducati Hyperstrada 821; on other models the mounting position of TRS01 can differ. Ducabike uses one part number, TRS01, for Ducati DesertX, Ducati Diavel, Ducati Diavel 1260, Ducati Diavel 1260 S and the bike on this page. The reference TRS01 is the safest way to identify this Ducabike part when comparing with other sources.\u003c\/p\u003e\u003ch2\u003ePick Your Shade\u003c\/h2\u003e\u003cp\u003eAnodised colours look different in daylight and in the garage, so the product photos are a useful guide.\u003c\/p\u003e\u003ch2\u003eRoad Use Notes\u003c\/h2\u003e\u003cp\u003eThis bike part comes without ABE, parts certificate or test report from the manufacturer. When you are unsure about TRS01, your nearest vehicle testing station can advise. If you are unsure, take the bike with TRS01 fitted to an approved inspection centre for advice.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Ducabike\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e TRS01\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Billet aluminium, machined from solid\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Coloured anodising\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Red, gold and black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Hyperstrada 821 (2013-2015)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ducabike","offers":[{"title":"Anodised Black","offer_id":54107939406090,"sku":"TRS01D","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Red","offer_id":54107939340554,"sku":"TRS01A","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Gold","offer_id":54107939373322,"sku":"TRS01B","price":16.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ducabike-trs01d_1.png?v=1794416568"},{"product_id":"ducabike-left-front-wheel-cap-ducati-hyperstrada-939-2016-2017-trs01","title":"Ducabike Left Front Wheel Cap Ducati Hyperstrada 939 (2016-2017) – TRS01","description":"\u003cp\u003eWith the Left Front Wheel Cap TRS01, Ducabike gives the 2016-2017 Hyperstrada 939 a billet aluminium detail in place of the original part. Factory parts are built for volume; the Ducabike part for the Hyperstrada 939 is cut from solid aluminium instead. Beyond the colour, reference TRS01 adds crisp machined lines to an area of the Hyperstrada 939 that is usually overlooked.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSolid-machined aluminium construction\u003c\/li\u003e\n\u003cli\u003eOne part in the box\u003c\/li\u003e\n\u003cli\u003eAnodised finish in red, gold and black\u003c\/li\u003e\n\u003cli\u003eFits in place of the original part\u003c\/li\u003e\n\u003cli\u003eSpecific fitment: Ducati Hyperstrada 939 (2016-2017)\u003c\/li\u003e\n\u003cli\u003eMade in Italy by Ducabike\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eLooking After the Finish\u003c\/h2\u003e\u003cp\u003eDry the left front wheel cap with a soft microfibre cloth to avoid water spots on the anodised finish. A covered parking spot protects TRS01 and the bike from sun, rain and dust. Before topping up a reservoir, cover the surrounding parts with a cloth.\u003c\/p\u003e\u003ch2\u003eBillet Aluminium from Italy\u003c\/h2\u003e\u003cp\u003eEvery contour of TRS01 is cut by Ducabike from billet, which keeps the part true to its design. The words Made in Italy are meant literally here, as Ducabike manufactures its billet parts there. Sturdy billet construction means TRS01 copes with regular cleaning and handling without losing its shape. Solid aluminium and careful finishing give the part a quality you notice each time you walk past the bike.\u003c\/p\u003e\u003ch2\u003eWhat Is in the Box\u003c\/h2\u003e\u003cp\u003eDucabike makes TRS01 as a direct replacement, fitted over the left end of the front wheel axle using the original mounting. The original mounting over the left end of the front wheel axle stays in use, so TRS01 goes on without adaptation. You receive one billet part, ready to replace the original part. Fitting the Ducabike part needs care more than special skill. Lay a soft cloth over painted areas nearby before you start the swap.\u003c\/p\u003e\u003ch2\u003eFitment Check\u003c\/h2\u003e\u003cp\u003eDucabike confirms the Ducati Hyperstrada 939 from 2016-2017 as the application for part number TRS01. A quick look at the vehicle papers confirms whether your bike is the Ducati Hyperstrada 939 from 2016-2017. A Hyperstrada 939 built outside 2016-2017 may use different parts, so please check before you buy. Reference TRS01 is not exclusive to one motorcycle: Ducabike also names Ducati DesertX, Ducati Diavel, Ducati Diavel 1260, Ducati Diavel 1260 S. Our customer service at Inter-Pace can look up TRS01 in the Ducabike data for you.\u003c\/p\u003e\u003ch2\u003eColour Options\u003c\/h2\u003e\u003cp\u003eSelect your colour for TRS01 in the options on this page; Ducabike lists red, gold and black.\u003c\/p\u003e\u003ch2\u003eBefore Riding on the Road\u003c\/h2\u003e\u003cp\u003eInter-Pace supplies TRS01 exactly as Ducabike delivers it: without approval documents. Regulations differ between countries, and only the local authorities can give a binding answer. On closed circuits other rules apply than on public roads; check both if you use TRS01 on track and road.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Ducabike\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e TRS01\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Billet aluminium, machined from solid\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Coloured anodising\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Red, gold and black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Hyperstrada 939 (2016-2017)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ducabike","offers":[{"title":"Anodised Black","offer_id":54107940028682,"sku":"TRS01D","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Red","offer_id":54107939963146,"sku":"TRS01A","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Gold","offer_id":54107939995914,"sku":"TRS01B","price":16.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ducabike-trs01d_1.png?v=1794416568"},{"product_id":"ducabike-left-front-wheel-cap-ducati-monster-1200-2014-2021-trs01","title":"Ducabike Left Front Wheel Cap Ducati Monster 1200 (2014-2021) – TRS01","description":"\u003cp\u003eOn this listing you will find the Ducabike left front wheel cap TRS01 for the Ducati Monster 1200 in its 2014-2021 form. Reference TRS01 adds a coloured highlight over the left end of the front wheel axle and lifts the overall look of the Ducati Monster 1200. A touch of anodised colour over the left end of the front wheel axle is often all the Monster 1200 needs to look more personal.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSolid-machined aluminium construction\u003c\/li\u003e\n\u003cli\u003eSupplied as a single part\u003c\/li\u003e\n\u003cli\u003eAvailable anodised in red, gold and black\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the original part\u003c\/li\u003e\n\u003cli\u003eMade to fit the Ducati Monster 1200 (2014-2021)\u003c\/li\u003e\n\u003cli\u003eMade in Italy by Ducabike\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrom Solid Block to Finished Part\u003c\/h2\u003e\u003cp\u003eFrom raw billet to finished left front wheel cap, the part is produced by Ducabike in Italy. Every surface of reference TRS01 is shaped by cutting, which is what billet manufacture means. Because it takes over from the original part at the same point, the Ducabike part blends with the surrounding layout. A part made from billet, such as TRS01, keeps its precise fit through everyday riding.\u003c\/p\u003e\u003ch2\u003eKeeping It Clean\u003c\/h2\u003e\u003cp\u003eAcidic rim cleaners and strong degreasers are not suitable for anodised aluminium. Fluids such as oil or fuel should not be left on the left front wheel cap; a quick wipe is enough. With simple, regular care, the anodised finish keeps its colour for a long time.\u003c\/p\u003e\u003ch2\u003eWhat Is in the Box\u003c\/h2\u003e\u003cp\u003eThe billet part uses the factory position of the original part over the left end of the front wheel axle. Because the part is supplied ready to fit, the work is limited to swapping out the original part. The box contains one Ducabike part, reference TRS01, in the colour you selected. Fitting TRS01 is straightforward for anyone used to basic work. Standard hand tools are usually enough to fit TRS01.\u003c\/p\u003e\u003ch2\u003eIs This the Right Part?\u003c\/h2\u003e\u003cp\u003eThis listing is for the Ducati Monster 1200 (2014-2021), as given by Ducabike for part number TRS01. Before ordering, compare the model designation in your papers with Ducati Monster 1200. Do not rely on looks alone; the papers of your motorcycle should name the Ducati Monster 1200 and a year within 2014-2021. Ducabike uses one part number, TRS01, for Ducati DesertX, Ducati Diavel, Ducati Diavel 1260, Ducati Diavel 1260 S and the bike on this page. A short enquiry before ordering saves time for both you and us.\u003c\/p\u003e\u003ch2\u003eChoosing the Colour\u003c\/h2\u003e\u003cp\u003eChoose the anodised colour that suits your motorcycle; for TRS01 Ducabike offers red, gold and black.\u003c\/p\u003e\u003ch2\u003eApproval Status\u003c\/h2\u003e\u003cp\u003eThe Ducabike delivery contains the part itself, but no certificate or approval. Ask your inspection authority if you want certainty about using TRS01 in road traffic. Whether TRS01 may stay on the bike for road use is decided by the law where the bike is registered.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Ducabike\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e TRS01\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Billet aluminium, machined from solid\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Coloured anodising\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Red, gold and black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Monster 1200 (2014-2021)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ducabike","offers":[{"title":"Anodised Black","offer_id":54107940323594,"sku":"TRS01D","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Red","offer_id":54107940258058,"sku":"TRS01A","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Gold","offer_id":54107940290826,"sku":"TRS01B","price":16.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ducabike-trs01d_1.png?v=1794416568"},{"product_id":"ducabike-left-front-wheel-cap-ducati-monster-1200-r-2016-2019-trs01","title":"Ducabike Left Front Wheel Cap Ducati Monster 1200 R (2016-2019) – TRS01","description":"\u003cp\u003eA machined finish for the Ducati Monster 1200 R (2016-2019) is what you add with the Ducabike Left Front Wheel Cap TRS01. Fitted over the left end of the front wheel axle, reference TRS01 turns a functional spot on the Monster 1200 R into a visible detail in anodised aluminium. This is a cosmetic and quality upgrade for the Ducati Monster 1200 R: same function as the original part, but in machined, anodised aluminium.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBillet aluminium, machined from a solid block\u003c\/li\u003e\n\u003cli\u003eAvailable anodised in red, gold and black\u003c\/li\u003e\n\u003cli\u003eOne part in the box\u003c\/li\u003e\n\u003cli\u003eFits in place of the original part\u003c\/li\u003e\n\u003cli\u003eMade to fit the Ducati Monster 1200 R (2016-2019)\u003c\/li\u003e\n\u003cli\u003eDesigned and made in Italy by Ducabike (DBK Special Parts)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFinding the Right Colour\u003c\/h2\u003e\u003cp\u003ePick a shade for TRS01 from the options listed, red, gold and black, to suit your bike.\u003c\/p\u003e\u003ch2\u003eCompatible Motorcycle\u003c\/h2\u003e\u003cp\u003eThe Ducabike catalogue pairs reference TRS01 with the Ducati Monster 1200 R, years 2016-2019. Should your motorcycle have been modified, compare it closely with a standard Ducati Monster 1200 R before ordering. To avoid a return, compare the production date of your Monster 1200 R against 2016-2019 first. Riders of Ducati DesertX, Ducati Diavel, Ducati Diavel 1260, Ducati Diavel 1260 S can use the same Ducabike part TRS01; please choose the page for your bike. If something about the fit of TRS01 is unclear, please ask before ordering.\u003c\/p\u003e\u003ch2\u003eFrom Solid Block to Finished Part\u003c\/h2\u003e\u003cp\u003eBillet means that Ducabike carves reference TRS01 out of solid aluminium instead of pressing or casting it. Milling from the solid, as Ducabike does for TRS01, gives the part dense material and precise contours. Next to other Ducabike billet parts, reference TRS01 shares the same material, machining and anodised look. Reference TRS01 is shaped to follow the original design lines, so it does not look like an add-on.\u003c\/p\u003e\u003ch2\u003eCare for Anodised Parts\u003c\/h2\u003e\u003cp\u003eA mild motorcycle cleaner and a microfibre cloth are all the part needs. Brake fluid can damage paint and finishes, so wipe up any spill straight away. Check TRS01 during routine maintenance, just as you would any other part on the bike.\u003c\/p\u003e\u003ch2\u003eReady to Fit\u003c\/h2\u003e\u003cp\u003eSwap the original part for TRS01 over the left end of the front wheel axle and the motorcycle carries its new billet detail. Where the original part sat before, reference TRS01 now takes over. For the motorcycle, Ducabike packs TRS01 as one single billet piece. Standard hand tools are usually enough to fit TRS01. Lay a soft cloth over painted areas nearby before you start the swap.\u003c\/p\u003e\u003ch2\u003eApproval and Local Rules\u003c\/h2\u003e\u003cp\u003eNo German ABE and no expert report: that is the status of TRS01 as supplied by Ducabike. An inspection body such as TÜV or DEKRA can advise you whether TRS01 needs to be entered or approved. Whether the change is acceptable on the road depends on the regulations where you live.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Ducabike\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e TRS01\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Billet aluminium, machined from solid\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Coloured anodising\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Red, gold and black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Monster 1200 R (2016-2019)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ducabike","offers":[{"title":"Anodised Black","offer_id":54107940618506,"sku":"TRS01D","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Red","offer_id":54107940552970,"sku":"TRS01A","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Gold","offer_id":54107940585738,"sku":"TRS01B","price":16.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ducabike-trs01d_1.png?v=1794416568"},{"product_id":"ducabike-left-front-wheel-cap-ducati-monster-1200-s-2014-2021-trs01","title":"Ducabike Left Front Wheel Cap Ducati Monster 1200 S (2014-2021) – TRS01","description":"\u003cp\u003eSpecifically for the Ducati Monster 1200 S (2014-2021), Ducabike mills the Left Front Wheel Cap TRS01 from solid aluminium. Fitted over the left end of the front wheel axle, reference TRS01 turns a functional spot on the Monster 1200 S into a visible detail in anodised aluminium. A touch of anodised colour over the left end of the front wheel axle is often all the Monster 1200 S needs to look more personal.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSolid-machined aluminium construction\u003c\/li\u003e\n\u003cli\u003eColour choice: red, gold and black\u003c\/li\u003e\n\u003cli\u003eSupplied as a single part\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the original part\u003c\/li\u003e\n\u003cli\u003eFitment per Ducabike: Ducati Monster 1200 S, 2014-2021\u003c\/li\u003e\n\u003cli\u003eDesigned and made in Italy by Ducabike (DBK Special Parts)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eConstruction and Material Quality\u003c\/h2\u003e\u003cp\u003eDucabike produces the left front wheel cap in Italy, machining every piece from billet aluminium. Machined rather than moulded: reference TRS01 is solid aluminium from the core to the surface. Aluminium milled to shape stays true, which keeps the part sitting correctly for years. Precisely machined surfaces let reference TRS01 sit flush with the parts around it.\u003c\/p\u003e\u003ch2\u003eIs This the Right Part?\u003c\/h2\u003e\u003cp\u003eThis version of TRS01 is offered for the Ducati Monster 1200 S built 2014-2021, following the Ducabike list. If your Monster 1200 S falls outside 2014-2021, the fit of TRS01 cannot be assumed. The Ducati Monster 1200 S listed here may share its name with other versions, so confirm the years 2014-2021. Separate pages for TRS01 exist for the following as well: Ducati DesertX, Ducati Diavel, Ducati Diavel 1260, Ducati Diavel 1260 S. Our team at Inter-Pace is happy to match TRS01 against your machine if anything is unclear.\u003c\/p\u003e\u003ch2\u003eColours Available\u003c\/h2\u003e\u003cp\u003eAnodised in red, gold and black, the left front wheel cap can either match existing accents or set a deliberate contrast.\u003c\/p\u003e\u003ch2\u003eCare for Anodised Parts\u003c\/h2\u003e\u003cp\u003eAvoid abrasive cleaners and polishing pastes on the part, as they can dull the anodised colour. With occasional cleaning, the anodised colour of TRS01 lasts through many riding seasons. Spilled brake fluid should never be left, because it can damage paintwork within a short time.\u003c\/p\u003e\u003ch2\u003eFitting the Part\u003c\/h2\u003e\u003cp\u003eThe original mounting over the left end of the front wheel axle stays in use, so TRS01 goes on without adaptation. Because the part is supplied ready to fit, the work is limited to swapping out the original part. Scope of supply for TRS01: a single machined part. If you are unsure about fitting TRS01, a specialist workshop can install it for you. Clean the mounting area before fitting TRS01, so dirt does not get trapped underneath.\u003c\/p\u003e\u003ch2\u003eLegal Status\u003c\/h2\u003e\u003cp\u003eThis part is supplied without an ABE and without an expert report. National regulations on vehicle modifications vary, so please check them before riding on public roads. Regulations differ between countries, and only the local authorities can give a binding answer.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Ducabike\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e TRS01\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Billet aluminium, machined from solid\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Coloured anodising\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Red, gold and black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Monster 1200 S (2014-2021)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ducabike","offers":[{"title":"Anodised Black","offer_id":54107940913418,"sku":"TRS01D","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Red","offer_id":54107940847882,"sku":"TRS01A","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Gold","offer_id":54107940880650,"sku":"TRS01B","price":16.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ducabike-trs01d_1.png?v=1794416568"},{"product_id":"ducabike-left-front-wheel-cap-ducati-monster-797-2017-2020-trs01","title":"Ducabike Left Front Wheel Cap Ducati Monster 797 (2017-2020) – TRS01","description":"\u003cp\u003eRiders of the Ducati Monster 797 (2017-2020) can replace a plain factory detail with the anodised Ducabike Left Front Wheel Cap, reference TRS01. One plain part swapped over the left end of the front wheel axle, and the Monster 797 immediately looks more considered. The Ducati Monster 797 rides exactly as before; the difference lies in the machined surface that now stands in for the original part.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMachined from solid billet aluminium\u003c\/li\u003e\n\u003cli\u003eAnodised finish in red, gold and black\u003c\/li\u003e\n\u003cli\u003eSupplied as a single part\u003c\/li\u003e\n\u003cli\u003eFits in place of the original part\u003c\/li\u003e\n\u003cli\u003eSpecific fitment: Ducati Monster 797 (2017-2020)\u003c\/li\u003e\n\u003cli\u003eDesigned and made in Italy by Ducabike (DBK Special Parts)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eModel and Year Check\u003c\/h2\u003e\u003cp\u003eDucabike specifies TRS01 for 2017-2020 examples of the Monster 797, and this listing follows that information. This listing covers only the Ducati Monster 797; other motorcycles have separate pages, even within the same range. Check the year of manufacture of your Monster 797 and compare it with 2017-2020 on this listing. The part sold here as TRS01 is the same one Ducabike supplies for Ducati DesertX, Ducati Diavel, Ducati Diavel 1260, Ducati Diavel 1260 S. Inter-Pace can confirm the Ducabike listing for TRS01 on request.\u003c\/p\u003e\u003ch2\u003eWhat Is in the Box\u003c\/h2\u003e\u003cp\u003eTake off the original part, clean the area and fit TRS01 there instead. No machining or painting is needed, since TRS01 is supplied finished and ready to fit. The delivery contains a single anodised part, reference TRS01. Fitting TRS01 is straightforward for anyone used to basic work. Fitting the Ducabike part needs care more than special skill.\u003c\/p\u003e\u003ch2\u003eColours Available\u003c\/h2\u003e\u003cp\u003eColour choice for the left front wheel cap depends on taste, paintwork and any parts you have fitted already.\u003c\/p\u003e\u003ch2\u003eCare and Everyday Use\u003c\/h2\u003e\u003cp\u003eAvoid abrasive cleaners and polishing pastes on the part, as they can dull the anodised colour. Before topping up a reservoir, cover the surrounding parts with a cloth. Cleaning the machine regularly protects not only TRS01 but every finish on the motorcycle.\u003c\/p\u003e\u003ch2\u003eConstruction and Material Quality\u003c\/h2\u003e\u003cp\u003eDucabike machines the Left Front Wheel Cap from a solid billet of aluminium rather than casting it. Every contour of TRS01 is cut by Ducabike from billet, which keeps the part true to its design. Aluminium milled to shape stays true, which keeps the part sitting correctly for years. Reference TRS01 is shaped to follow the original design lines, so it does not look like an add-on.\u003c\/p\u003e\u003ch2\u003eRules for Road Use\u003c\/h2\u003e\u003cp\u003ePlease note that TRS01 is supplied without any approval documents. Ask your inspection authority if you want certainty about using TRS01 in road traffic. Some countries treat a change from the original part to an aftermarket part as a modification that must be checked.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Ducabike\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e TRS01\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Billet aluminium, machined from solid\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Coloured anodising\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Red, gold and black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Monster 797 (2017-2020)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ducabike","offers":[{"title":"Anodised Black","offer_id":54107941306634,"sku":"TRS01D","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Red","offer_id":54107941241098,"sku":"TRS01A","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Gold","offer_id":54107941273866,"sku":"TRS01B","price":16.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ducabike-trs01d_1.png?v=1794416568"},{"product_id":"ducabike-left-front-wheel-cap-ducati-monster-821-2015-2021-trs01","title":"Ducabike Left Front Wheel Cap Ducati Monster 821 (2015-2021) – TRS01","description":"\u003cp\u003eDucabike, the Italian parts maker also trading as DBK Special Parts, lists the Left Front Wheel Cap TRS01 for the Ducati Monster 821 (2015-2021). The Ducati Monster 821 keeps its factory mounting points, while TRS01 replaces the plain stock look with milled aluminium. The visual result on the Ducati Monster 821 is a crisp anodised piece over the left end of the front wheel axle rather than the original part.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBillet aluminium, machined from a solid block\u003c\/li\u003e\n\u003cli\u003eSupplied as a single part\u003c\/li\u003e\n\u003cli\u003eColour choice: red, gold and black\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the original part\u003c\/li\u003e\n\u003cli\u003eFitment per Ducabike: Ducati Monster 821, 2015-2021\u003c\/li\u003e\n\u003cli\u003eMade in Italy by Ducabike\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCare and Maintenance\u003c\/h2\u003e\u003cp\u003eRinse off shampoo residue from TRS01 thoroughly, as dried cleaner can leave streaks. With occasional cleaning, the anodised colour of TRS01 lasts through many riding seasons. Store the machine under cover in winter to keep TRS01 and the rest of the bike in good shape.\u003c\/p\u003e\u003ch2\u003eInstallation and Scope of Delivery\u003c\/h2\u003e\u003cp\u003eReference TRS01 arrives ready to fit and takes the place of the original part over the left end of the front wheel axle. No machining or painting is needed, since TRS01 is supplied finished and ready to fit. Scope of supply for TRS01: a single machined part. Should anything not line up as expected, stop and ask a workshop rather than forcing TRS01 into place. Tighten the fixings of TRS01 evenly and with feeling, as aluminium threads deserve care.\u003c\/p\u003e\u003ch2\u003eMaterial and Anodised Finish\u003c\/h2\u003e\u003cp\u003eLight alloy milled from the solid is what Ducabike uses for the Left Front Wheel Cap, reference TRS01. Instead of the mass-production methods behind the original part, Ducabike mills the part from solid aluminium. Alongside other anodised Ducabike parts, TRS01 looks like it belongs to one coherent set. Whether the motorcycle wears more Ducabike parts or none, TRS01 blends in as a coherent detail.\u003c\/p\u003e\u003ch2\u003eColour and Finish\u003c\/h2\u003e\u003cp\u003eChoose the anodised colour that suits your bike; for TRS01 Ducabike offers red, gold and black.\u003c\/p\u003e\u003ch2\u003eWhich Bikes It Fits\u003c\/h2\u003e\u003cp\u003eFit on the Ducati Monster 821 (2015-2021) is stated by Ducabike for TRS01. If the year on your papers does not fall within 2015-2021, this Monster 821 listing is not the one you need. Does your Monster 821 date from outside 2015-2021? Please get in touch before ordering. Ducabike assigns code TRS01 to Ducati DesertX, Ducati Diavel, Ducati Diavel 1260, Ducati Diavel 1260 S as well, and Inter-Pace gives each of those motorcycles a page of its own. Matching reference numbers is a reliable check, so keep TRS01 to hand when comparing parts.\u003c\/p\u003e\u003ch2\u003eRoad Approval\u003c\/h2\u003e\u003cp\u003eFrom Ducabike, TRS01 comes with neither ABE nor parts certificate nor any test report. Ask your local testing station if you are unsure whether TRS01 is permitted on the road. Before road use, find out whether your national rules allow TRS01 in place of the original part.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Ducabike\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e TRS01\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Billet aluminium, machined from solid\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Coloured anodising\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Red, gold and black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Monster 821 (2015-2021)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ducabike","offers":[{"title":"Anodised Black","offer_id":54107941634314,"sku":"TRS01D","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Red","offer_id":54107941568778,"sku":"TRS01A","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Gold","offer_id":54107941601546,"sku":"TRS01B","price":16.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ducabike-trs01d_1.png?v=1794416568"},{"product_id":"ducabike-left-front-wheel-cap-ducati-monster-937-2021-2025-trs01","title":"Ducabike Left Front Wheel Cap Ducati Monster 937 (2021-2025) – TRS01","description":"\u003cp\u003eDucabike, the Italian parts maker also trading as DBK Special Parts, lists the Left Front Wheel Cap TRS01 for the Ducati Monster 937 (2021-2025). Function stays the same as with the original part, while the Monster 937 gains Italian billet craftsmanship in plain sight. Riders who have already added Ducabike parts will find that TRS01 continues the same machined look on the Monster 937.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSolid-machined aluminium construction\u003c\/li\u003e\n\u003cli\u003eAvailable anodised in red, gold and black\u003c\/li\u003e\n\u003cli\u003eSupplied as a single part\u003c\/li\u003e\n\u003cli\u003eFits in place of the original part\u003c\/li\u003e\n\u003cli\u003eMade to fit the Ducati Monster 937 (2021-2025)\u003c\/li\u003e\n\u003cli\u003eMade in Italy by Ducabike\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation and Scope of Delivery\u003c\/h2\u003e\u003cp\u003eRemove the original part, fit the Ducabike part in the same spot and the job is done. Delivered ready to install, the part is fitted over the left end of the front wheel axle in place of the original part. One machined part is what you get with TRS01, enough to take the place of the original part. If you have little experience with motorcycle maintenance, let a workshop fit TRS01. Basic hand tools in good condition are normally all you need to fit TRS01.\u003c\/p\u003e\u003ch2\u003eMaterial and Anodised Finish\u003c\/h2\u003e\u003cp\u003eAluminium machined from the solid is the material of choice for reference TRS01. The words Made in Italy are meant literally here, as Ducabike manufactures its billet parts there. Sturdy billet construction means TRS01 copes with regular cleaning and handling without losing its shape. Aluminium that has been machined accurately does not deform in normal use.\u003c\/p\u003e\u003ch2\u003eCare Notes\u003c\/h2\u003e\u003cp\u003eWipe road dirt from TRS01 regularly; the part stays brighter with gentle, frequent care. Check TRS01 now and then for dirt building up around its edges. A covered parking spot protects TRS01 and the bike from sun, rain and dust.\u003c\/p\u003e\u003ch2\u003eWhich Bikes It Fits\u003c\/h2\u003e\u003cp\u003eThe Ducabike catalogue pairs reference TRS01 with the Ducati Monster 937, years 2021-2025. Should your motorcycle have been modified, compare it closely with a standard Ducati Monster 937 before ordering. Every Ducabike reference is tied to specific motorcycles, and this page covers the Ducati Monster 937 alone. You will also find reference TRS01 for Ducati DesertX, Ducati Diavel, Ducati Diavel 1260, Ducati Diavel 1260 S, with a dedicated listing for every motorcycle. Getting the right part first time is easier with the reference to hand: TRS01.\u003c\/p\u003e\u003ch2\u003ePick Your Shade\u003c\/h2\u003e\u003cp\u003eMatched to the rest, the colour of TRS01 (red, gold and black) becomes part of a coordinated look.\u003c\/p\u003e\u003ch2\u003eApproval Status\u003c\/h2\u003e\u003cp\u003eNo German ABE and no expert report: that is the status of TRS01 as supplied by Ducabike. Ask your inspection authority if you want certainty about using TRS01 in road traffic. Track use is a separate matter; for public roads, the regulations of your country apply.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Ducabike\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e TRS01\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Billet aluminium, machined from solid\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Coloured anodising\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Red, gold and black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Monster 937 (2021-2025)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ducabike","offers":[{"title":"Anodised Black","offer_id":54107941863690,"sku":"TRS01D","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Red","offer_id":54107941798154,"sku":"TRS01A","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Gold","offer_id":54107941830922,"sku":"TRS01B","price":16.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ducabike-trs01d_1.png?v=1794416568"},{"product_id":"ducabike-left-front-wheel-cap-ducati-monster-937-sp-2023-2025-trs01","title":"Ducabike Left Front Wheel Cap Ducati Monster 937 SP (2023-2025) – TRS01","description":"\u003cp\u003eFrom the Ducabike range for the Ducati Monster 937 SP (2023-2025), we offer the left front wheel cap with part number TRS01. The Ducati Monster 937 SP rides exactly as before; the difference lies in the machined surface that now stands in for the original part. Riders often start with details like TRS01 because they change the look of the Monster 937 SP without touching anything mechanical.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMachined from solid billet aluminium\u003c\/li\u003e\n\u003cli\u003eAnodised finish in red, gold and black\u003c\/li\u003e\n\u003cli\u003eSupplied as a single part\u003c\/li\u003e\n\u003cli\u003eReplaces the original part, no modifications needed\u003c\/li\u003e\n\u003cli\u003eMade to fit the Ducati Monster 937 SP (2023-2025)\u003c\/li\u003e\n\u003cli\u003eMade in Italy by Ducabike\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eMachined from the Solid\u003c\/h2\u003e\u003cp\u003eAs an Italian maker of billet parts, Ducabike designs TRS01 specifically around the motorcycle. Behind the brand Ducabike stands an Italian specialist in machined aluminium motorcycle parts, the maker of TRS01. Alongside other anodised Ducabike parts, TRS01 looks like it belongs to one coherent set. Sturdy billet construction means TRS01 copes with regular cleaning and handling without losing its shape.\u003c\/p\u003e\u003ch2\u003eReady to Fit\u003c\/h2\u003e\u003cp\u003eReady to fit means the part is finished and anodised when it reaches you. Everything about TRS01 is finished in Italy, so you only exchange it for the original part. The box contains one Ducabike part, reference TRS01, in the colour you selected. Use well-fitting tools so the fixings and the anodised surface of TRS01 stay unmarked. Put the bike on a paddock stand or centre stand so it cannot move while you work.\u003c\/p\u003e\u003ch2\u003eChoosing the Colour\u003c\/h2\u003e\u003cp\u003eWhatever paint your bike wears, the anodised finish of TRS01 in red, gold and black can be chosen to suit it.\u003c\/p\u003e\u003ch2\u003eIs This the Right Part?\u003c\/h2\u003e\u003cp\u003eDucabike specifies TRS01 for 2023-2025 examples of the Monster 937 SP, and this listing follows that information. Checking the chassis details of your Monster 937 SP is a reliable way to confirm the right listing. This page is for the Ducati Monster 937 SP only; other models need their own listing. Reference TRS01 is not exclusive to one motorcycle: Ducabike also names Ducati DesertX, Ducati Diavel, Ducati Diavel 1260, Ducati Diavel 1260 S. Unsure whether TRS01 suits your motorcycle? Contact Inter-Pace before ordering and mention the reference.\u003c\/p\u003e\u003ch2\u003eCleaning and Upkeep\u003c\/h2\u003e\u003cp\u003eAvoid abrasive cleaners and polishing pastes on the part, as they can dull the anodised colour. Fluids such as oil or fuel should not be left on the left front wheel cap; a quick wipe is enough. When topping up fluids, cover nearby surfaces and clean up spills immediately.\u003c\/p\u003e\u003ch2\u003eRoad Use and Approval\u003c\/h2\u003e\u003cp\u003eThis part is supplied without an ABE and without an expert report. Before road use, find out whether your national rules allow TRS01 in place of the original part. A local inspection body can tell you whether TRS01 needs to be registered or inspected.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Ducabike\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e TRS01\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Billet aluminium, machined from solid\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Coloured anodising\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Red, gold and black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Monster 937 SP (2023-2025)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ducabike","offers":[{"title":"Anodised Black","offer_id":54107942420746,"sku":"TRS01D","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Red","offer_id":54107942355210,"sku":"TRS01A","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Gold","offer_id":54107942387978,"sku":"TRS01B","price":16.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ducabike-trs01d_1.png?v=1794416568"},{"product_id":"ducabike-left-front-wheel-cap-ducati-multistrada-1200-2010-2017-trs01","title":"Ducabike Left Front Wheel Cap Ducati Multistrada 1200 (2010-2017) – TRS01","description":"\u003cp\u003eDucabike's answer to the original part on the Ducati Multistrada 1200 (2010-2017) is the billet left front wheel cap sold as TRS01. A stock part does its job, and the Ducabike version does the same job on the Ducati Multistrada 1200 with more visual care. Factory parts are built for volume; the Ducabike part for the Multistrada 1200 is cut from solid aluminium instead.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMachined from solid billet aluminium\u003c\/li\u003e\n\u003cli\u003eAvailable anodised in red, gold and black\u003c\/li\u003e\n\u003cli\u003eOne part in the box\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the original part\u003c\/li\u003e\n\u003cli\u003eMade to fit the Ducati Multistrada 1200 (2010-2017)\u003c\/li\u003e\n\u003cli\u003eDesigned and made in Italy by Ducabike (DBK Special Parts)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eThe Aluminium Behind the Part\u003c\/h2\u003e\u003cp\u003eReference TRS01 starts as a block of aluminium that Ducabike mills down to shape. As an Italian maker of billet parts, Ducabike designs TRS01 specifically around the machine. Because it takes over from the original part at the same point, the Ducabike part blends with the surrounding layout. Clean edges give the part a finish that looks deliberate rather than mass-produced.\u003c\/p\u003e\u003ch2\u003eWhat Is in the Box\u003c\/h2\u003e\u003cp\u003eDelivered ready to install, the part is fitted over the left end of the front wheel axle in place of the original part. The Ducabike left front wheel cap uses the existing mounting over the left end of the front wheel axle, with no changes to the bike. You receive one billet part, ready to replace the original part. Work carefully around painted surfaces and protect them with a cloth while fitting the part. Tighten the fixings of TRS01 evenly and with feeling, as aluminium threads deserve care.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eYour Ducati Multistrada 1200 from 2010-2017 is the motorcycle that Ducabike reference TRS01 is listed for. Do not rely on looks alone; the papers of your motorcycle should name the Ducati Multistrada 1200 and a year within 2010-2017. Only order this listing if the motorcycle in your garage is a Ducati Multistrada 1200 built within 2010-2017. Reference TRS01 is not exclusive to one motorcycle: Ducabike also names Ducati DesertX, Ducati Diavel, Ducati Diavel 1260, Ducati Diavel 1260 S. Ducabike's own reference TRS01 is the number to quote for the part in any enquiry.\u003c\/p\u003e\u003ch2\u003eFinding the Right Colour\u003c\/h2\u003e\u003cp\u003eSelecting one colour for several anodised parts creates a calm, consistent look.\u003c\/p\u003e\u003ch2\u003eLooking After the Finish\u003c\/h2\u003e\u003cp\u003eKeep polishing compounds away from TRS01, as they can wear away the anodised colour. With occasional cleaning, the anodised colour of TRS01 lasts through many riding seasons. Brake fluid can damage paint and finishes, so wipe up any spill straight away.\u003c\/p\u003e\u003ch2\u003eApproval and Local Rules\u003c\/h2\u003e\u003cp\u003eNo parts certificate and no test report come with the left front wheel cap. Whether the change is acceptable on the road depends on the regulations where you live. On closed circuits other rules apply than on public roads; check both if you use TRS01 on track and road.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Ducabike\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e TRS01\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Billet aluminium, machined from solid\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Coloured anodising\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Red, gold and black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Multistrada 1200 (2010-2017)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ducabike","offers":[{"title":"Anodised Black","offer_id":54107942551818,"sku":"TRS01D","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Red","offer_id":54107942486282,"sku":"TRS01A","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Gold","offer_id":54107942519050,"sku":"TRS01B","price":16.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ducabike-trs01d_1.png?v=1794416568"},{"product_id":"ducabike-left-front-wheel-cap-ducati-multistrada-1200-enduro-2016-2019-trs01","title":"Ducabike Left Front Wheel Cap Ducati Multistrada 1200 Enduro (2016-2019) – TRS01","description":"\u003cp\u003eItalian-made reference TRS01 from Ducabike is meant for the Ducati Multistrada 1200 Enduro (2016-2019), where it stands in for the original part. A stock part does its job, and the Ducabike version does the same job on the Ducati Multistrada 1200 Enduro with more visual care. Think of TRS01 as a finishing touch for the Ducati Multistrada 1200 Enduro, placed over the left end of the front wheel axle where the eye tends to land.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMachined from solid billet aluminium\u003c\/li\u003e\n\u003cli\u003eColour choice: red, gold and black\u003c\/li\u003e\n\u003cli\u003eSupplied as a single part\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the original part\u003c\/li\u003e\n\u003cli\u003eMade to fit the Ducati Multistrada 1200 Enduro (2016-2019)\u003c\/li\u003e\n\u003cli\u003eDesigned and made in Italy by Ducabike (DBK Special Parts)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eEvery Ducabike part in this range is supplied finished, so no further work on the part is needed before fitting. Installing TRS01 means replacing the original part over the left end of the front wheel axle with the billet version. You receive one billet part, ready to replace the original part. After a few rides, check that TRS01 is still firmly in place. Avoid unprotected pliers on the anodised surface of TRS01, as they leave marks on the part.\u003c\/p\u003e\u003ch2\u003eCare and Everyday Use\u003c\/h2\u003e\u003cp\u003eScratchy sponges and steel wool leave marks on anodised surfaces, so avoid them completely. Riding in all weathers is fine, as long as the bike is cleaned and dried afterwards. Leaning a helmet or keys against TRS01 can leave marks, so give the part some space.\u003c\/p\u003e\u003ch2\u003eWhich Bikes It Fits\u003c\/h2\u003e\u003cp\u003eModel years 2016-2019 of the Ducati Multistrada 1200 Enduro are covered by reference TRS01, according to Ducabike. Versions of the Multistrada 1200 Enduro that look alike may still differ underneath, so confirm that yours is the Ducati Multistrada 1200 Enduro. Should your motorcycle have been modified, compare it closely with a standard Ducati Multistrada 1200 Enduro before ordering. Physically the same TRS01 is catalogued for Ducati DesertX, Ducati Diavel, Ducati Diavel 1260, Ducati Diavel 1260 S; look for the page that carries your bike name. A short enquiry before ordering saves time for both you and us.\u003c\/p\u003e\u003ch2\u003eAnodised Colour Choice\u003c\/h2\u003e\u003cp\u003eThe available finish for TRS01 is red, gold and black, shown in the selection on this page.\u003c\/p\u003e\u003ch2\u003eBillet Aluminium from Italy\u003c\/h2\u003e\u003cp\u003eWorking from a solid block lets Ducabike give the part sharp edges and a dense, even structure. Ducabike produces the left front wheel cap in Italy, machining every piece from billet aluminium. Billet parts like TRS01 tend to age well, as solid aluminium does not warp like plastic. Whether the bike wears more Ducabike parts or none, TRS01 blends in as a coherent detail.\u003c\/p\u003e\u003ch2\u003eLegal Status\u003c\/h2\u003e\u003cp\u003eInter-Pace supplies TRS01 exactly as Ducabike delivers it: without approval documents. An inspection body such as TÜV or DEKRA can advise you whether TRS01 needs to be entered or approved. Whether TRS01 may stay on the bike for road use is decided by the law where the bike is registered.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Ducabike\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e TRS01\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Billet aluminium, machined from solid\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Coloured anodising\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Red, gold and black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Multistrada 1200 Enduro (2016-2019)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ducabike","offers":[{"title":"Anodised Black","offer_id":54107942682890,"sku":"TRS01D","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Red","offer_id":54107942617354,"sku":"TRS01A","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Gold","offer_id":54107942650122,"sku":"TRS01B","price":16.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ducabike-trs01d_1.png?v=1794416568"},{"product_id":"ducabike-left-front-wheel-cap-ducati-multistrada-1200-s-2010-2017-trs01","title":"Ducabike Left Front Wheel Cap Ducati Multistrada 1200 S (2010-2017) – TRS01","description":"\u003cp\u003eDucabike designed reference TRS01 (left front wheel cap) in billet aluminium for the Multistrada 1200 S built 2010-2017. Nothing about how the Multistrada 1200 S rides changes; what changes is the quality of the detail over the left end of the front wheel axle. The Ducati Multistrada 1200 S keeps its factory mounting points, while TRS01 replaces the plain stock look with milled aluminium.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBillet aluminium, machined from a solid block\u003c\/li\u003e\n\u003cli\u003eAvailable anodised in red, gold and black\u003c\/li\u003e\n\u003cli\u003eSupplied as a single part\u003c\/li\u003e\n\u003cli\u003eReplaces the original part, no modifications needed\u003c\/li\u003e\n\u003cli\u003eSpecific fitment: Ducati Multistrada 1200 S (2010-2017)\u003c\/li\u003e\n\u003cli\u003eDesigned and made in Italy by Ducabike (DBK Special Parts)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCare for Anodised Parts\u003c\/h2\u003e\u003cp\u003eA soft brush helps to lift dirt from edges and recesses of TRS01 without scratching. Regular washing keeps TRS01 looking as good as the day it was fitted. Road salt in winter should be rinsed off promptly, from TRS01 as well as from the whole bike.\u003c\/p\u003e\u003ch2\u003eIs This the Right Part?\u003c\/h2\u003e\u003cp\u003eReference TRS01 is intended for the Ducati Multistrada 1200 S produced 2010-2017, in line with Ducabike's compatibility list. To avoid a return, compare the production date of your Multistrada 1200 S against 2010-2017 first. Checking the chassis details of your Multistrada 1200 S is a reliable way to confirm the right listing. Ducabike assigns code TRS01 to Ducati DesertX, Ducati Diavel, Ducati Diavel 1260, Ducati Diavel 1260 S as well, and Inter-Pace gives each of those motorcycles a page of its own. If you already own Ducabike parts, comparing reference numbers with TRS01 is a useful check.\u003c\/p\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eFitting TRS01 over the left end of the front wheel axle is a matter of exchanging parts, not modifying the motorcycle. Ducabike makes TRS01 as a direct replacement, fitted over the left end of the front wheel axle using the original mounting. Included is one anodised aluminium part, reference TRS01. Take your time, as a careful swap protects both the new part and the surrounding components. Avoid unprotected pliers on the anodised surface of TRS01, as they leave marks on the part.\u003c\/p\u003e\u003ch2\u003eMaterial Details\u003c\/h2\u003e\u003cp\u003eAs a manufacturer of billet parts, Ducabike keeps production of the left front wheel cap in Italy. Reference TRS01 is cut from a solid block of aluminium, not cast or pressed into shape. Sturdy billet construction means TRS01 copes with regular cleaning and handling without losing its shape. Billet aluminium holds its shape, so reference TRS01 keeps fitting as it did on day one.\u003c\/p\u003e\u003ch2\u003eColour Matching\u003c\/h2\u003e\u003cp\u003eIf your motorcycle already carries anodised parts, pick the shade of TRS01 that ties them together: red, gold and black.\u003c\/p\u003e\u003ch2\u003eApproval Notes\u003c\/h2\u003e\u003cp\u003eApproval paperwork such as an ABE or a parts certificate is not part of this delivery. Before riding the bike on public roads with TRS01, make sure the change complies with your national regulations. In some countries even cosmetic parts such as TRS01 must meet specific rules, so please inform yourself.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Ducabike\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e TRS01\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Billet aluminium, machined from solid\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Coloured anodising\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Red, gold and black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Multistrada 1200 S (2010-2017)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ducabike","offers":[{"title":"Anodised Black","offer_id":54107943371018,"sku":"TRS01D","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Red","offer_id":54107943305482,"sku":"TRS01A","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Gold","offer_id":54107943338250,"sku":"TRS01B","price":16.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ducabike-trs01d_1.png?v=1794416568"},{"product_id":"ducabike-left-front-wheel-cap-ducati-multistrada-1200-pikes-peak-2012-2017-trs01","title":"Ducabike Left Front Wheel Cap Ducati Multistrada 1200 Pikes Peak (2012-2017) – TRS01","description":"\u003cp\u003eThis page covers the Ducabike Left Front Wheel Cap TRS01, listed for one motorcycle only: the Ducati Multistrada 1200 Pikes Peak (2012-2017). Mechanically the Multistrada 1200 Pikes Peak stays as it was; visually, machined aluminium takes over from the original part over the left end of the front wheel axle. Beyond the colour, reference TRS01 adds crisp machined lines to an area of the Multistrada 1200 Pikes Peak that is usually overlooked.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMachined from solid billet aluminium\u003c\/li\u003e\n\u003cli\u003eAnodised finish in red, gold and black\u003c\/li\u003e\n\u003cli\u003eSupplied as a single part\u003c\/li\u003e\n\u003cli\u003eReplaces the original part, no modifications needed\u003c\/li\u003e\n\u003cli\u003eFitment per Ducabike: Ducati Multistrada 1200 Pikes Peak, 2012-2017\u003c\/li\u003e\n\u003cli\u003eMade in Italy by Ducabike\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eShade and Finish\u003c\/h2\u003e\u003cp\u003ePairing TRS01 with other Ducabike parts in the same shade gives the bike a consistent, planned appearance.\u003c\/p\u003e\u003ch2\u003eWhat the Swap Involves\u003c\/h2\u003e\u003cp\u003eAs supplied, the Ducabike part is finished, anodised and ready to go onto the bike. Ducabike's ready-to-fit approach means you receive TRS01 complete, with only the swap left to do. Scope of supply for TRS01: a single machined part. Park the machine securely, ideally on a stand, before you begin the swap. A clean, well-lit workspace makes fitting TRS01 easier and safer.\u003c\/p\u003e\u003ch2\u003eLong-Term Care\u003c\/h2\u003e\u003cp\u003eMild, pH-neutral cleaners keep the colour of the part fresh. When topping up fluids, cover nearby surfaces and clean up spills immediately. Brake fluid can damage paint and finishes, so wipe up any spill straight away.\u003c\/p\u003e\u003ch2\u003eThe Aluminium Behind the Part\u003c\/h2\u003e\u003cp\u003eSolid aluminium, machined in Italy, is the basis of the Ducabike left front wheel cap. As an Italian maker of billet parts, Ducabike designs TRS01 specifically around the bike. Sturdy billet construction means TRS01 copes with regular cleaning and handling without losing its shape. Solid aluminium and careful finishing give the part a quality you notice each time you walk past the bike.\u003c\/p\u003e\u003ch2\u003eFitment Check\u003c\/h2\u003e\u003cp\u003eThe motorcycle for this listing is the Ducati Multistrada 1200 Pikes Peak, built 2012-2017, as specified by Ducabike for TRS01. Do not rely on looks alone; the papers of your motorcycle should name the Ducati Multistrada 1200 Pikes Peak and a year within 2012-2017. Where the Multistrada 1200 Pikes Peak name covers several versions, the model years 2012-2017 help to tell them apart. Also compatible with TRS01, according to Ducabike: Ducati DesertX, Ducati Diavel, Ducati Diavel 1260, Ducati Diavel 1260 S, each on its own product page. Inter-Pace can confirm the Ducabike listing for TRS01 on request.\u003c\/p\u003e\u003ch2\u003eRoad Use and Approval\u003c\/h2\u003e\u003cp\u003eNeither an ABE nor any expert test report exists from Ducabike for TRS01. Track use is a separate matter; for public roads, the regulations of your country apply. When you are unsure about TRS01, your nearest vehicle testing station can advise.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Ducabike\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e TRS01\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Billet aluminium, machined from solid\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Coloured anodising\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Red, gold and black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Multistrada 1200 Pikes Peak (2012-2017)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ducabike","offers":[{"title":"Anodised Black","offer_id":54107943502090,"sku":"TRS01D","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Red","offer_id":54107943436554,"sku":"TRS01A","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Gold","offer_id":54107943469322,"sku":"TRS01B","price":16.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ducabike-trs01d_1.png?v=1794416568"},{"product_id":"ducabike-left-front-wheel-cap-ducati-multistrada-1260-2018-2020-trs01","title":"Ducabike Left Front Wheel Cap Ducati Multistrada 1260 (2018-2020) – TRS01","description":"\u003cp\u003eYour Ducati Multistrada 1260 (2018-2020) can wear the Ducabike Left Front Wheel Cap TRS01, milled from a solid block of aluminium. Compared with the original part, the billet part from Ducabike brings sharper lines and a deeper colour to the Ducati Multistrada 1260. A stock part does its job, and the Ducabike version does the same job on the Ducati Multistrada 1260 with more visual care.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBillet aluminium, machined from a solid block\u003c\/li\u003e\n\u003cli\u003eSupplied as a single part\u003c\/li\u003e\n\u003cli\u003eColour choice: red, gold and black\u003c\/li\u003e\n\u003cli\u003eReplaces the original part, no modifications needed\u003c\/li\u003e\n\u003cli\u003eMade to fit the Ducati Multistrada 1260 (2018-2020)\u003c\/li\u003e\n\u003cli\u003eDesigned and made in Italy by Ducabike (DBK Special Parts)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eIs This the Right Part?\u003c\/h2\u003e\u003cp\u003eReference TRS01 carries a Ducabike fitment entry for the Ducati Multistrada 1260, built 2018-2020. Earlier or later generations of the Multistrada 1260 are not covered by this page. If the year on your papers does not fall within 2018-2020, this Multistrada 1260 listing is not the one you need. Ducabike's list shows TRS01 for Ducati DesertX, Ducati Diavel, Ducati Diavel 1260, Ducati Diavel 1260 S as well, and Inter-Pace lists every one of these bikes on its own page. Inter-Pace answers fitment questions before you order, so you can buy with confidence.\u003c\/p\u003e\u003ch2\u003eAnodised Colour Choice\u003c\/h2\u003e\u003cp\u003eIf your machine already carries anodised parts, pick the shade of TRS01 that ties them together: red, gold and black.\u003c\/p\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eInstallation follows a simple logic: out with the original part, in with TRS01. The original mounting over the left end of the front wheel axle stays in use, so TRS01 goes on without adaptation. One machined part is what you get with TRS01, enough to take the place of the original part. Store the original part safely in case you ever want to go back to standard. Put the bike on a paddock stand or centre stand so it cannot move while you work.\u003c\/p\u003e\u003ch2\u003eBillet Aluminium from Italy\u003c\/h2\u003e\u003cp\u003eParts milled from the solid have no seams or joints, because each one starts as one piece of metal. Billet aluminium gives TRS01 a solid feel in the hand, and that quality carries over to the look. The machined surface reflects light differently from moulded parts, which adds depth to the look. Billet parts like TRS01 tend to age well, as solid aluminium does not warp like plastic.\u003c\/p\u003e\u003ch2\u003eCleaning Tips\u003c\/h2\u003e\u003cp\u003eHigh-pressure jets should not be aimed directly at TRS01 from close range. Brake fluid attacks paint, so if any drips during maintenance, wipe it off at once. Spilled brake fluid should never be left, because it can damage paintwork within a short time.\u003c\/p\u003e\u003ch2\u003eLocal Regulations\u003c\/h2\u003e\u003cp\u003eNeither an ABE nor any expert test report exists from Ducabike for TRS01. It is the rider's responsibility to make sure that fitting TRS01 complies with local law. Track use is a separate matter; for public roads, the regulations of your country apply.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Ducabike\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e TRS01\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Billet aluminium, machined from solid\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Coloured anodising\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Red, gold and black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Multistrada 1260 (2018-2020)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ducabike","offers":[{"title":"Anodised Black","offer_id":54107943633162,"sku":"TRS01D","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Red","offer_id":54107943567626,"sku":"TRS01A","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Gold","offer_id":54107943600394,"sku":"TRS01B","price":16.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ducabike-trs01d_1.png?v=1794416568"},{"product_id":"ducabike-left-front-wheel-cap-ducati-multistrada-1260-enduro-2019-2021-trs01","title":"Ducabike Left Front Wheel Cap Ducati Multistrada 1260 Enduro (2019-2021) – TRS01","description":"\u003cp\u003eAs billet work from Ducabike, reference TRS01 (left front wheel cap) is matched to the Multistrada 1260 Enduro built 2019-2021. The Ducati Multistrada 1260 Enduro keeps its factory mounting points, while TRS01 replaces the plain stock look with milled aluminium. Think of TRS01 as a finishing touch for the Ducati Multistrada 1260 Enduro, placed over the left end of the front wheel axle where the eye tends to land.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSolid-machined aluminium construction\u003c\/li\u003e\n\u003cli\u003eSupplied as a single part\u003c\/li\u003e\n\u003cli\u003eAnodised finish in red, gold and black\u003c\/li\u003e\n\u003cli\u003eFits in place of the original part\u003c\/li\u003e\n\u003cli\u003eFitment per Ducabike: Ducati Multistrada 1260 Enduro, 2019-2021\u003c\/li\u003e\n\u003cli\u003eDesigned and made in Italy by Ducabike (DBK Special Parts)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eLong-Term Care\u003c\/h2\u003e\u003cp\u003eMild, pH-neutral cleaners keep the colour of the part fresh. Fluids such as oil or fuel should not be left on the left front wheel cap; a quick wipe is enough. Regular washing keeps TRS01 looking as good as the day it was fitted.\u003c\/p\u003e\u003ch2\u003eMounting and Delivery\u003c\/h2\u003e\u003cp\u003eFitting is a direct swap: remove the original part and install TRS01 in the same position. The original mounting over the left end of the front wheel axle stays in use, so TRS01 goes on without adaptation. Ducabike supplies TRS01 individually, as one part. Check the fit of TRS01 after the first rides and retighten if needed. Should anything not line up as expected, stop and ask a workshop rather than forcing TRS01 into place.\u003c\/p\u003e\u003ch2\u003eFrom Solid Block to Finished Part\u003c\/h2\u003e\u003cp\u003eAs an Italian maker of billet parts, Ducabike designs TRS01 specifically around the bike. Reference TRS01 starts as a block of aluminium that Ducabike mills down to shape. Whether the machine wears more Ducabike parts or none, TRS01 blends in as a coherent detail. Billet parts like TRS01 tend to age well, as solid aluminium does not warp like plastic.\u003c\/p\u003e\u003ch2\u003eChecking Your Bike\u003c\/h2\u003e\u003cp\u003eCompatible motorcycle according to Ducabike: Ducati Multistrada 1260 Enduro (2019-2021), part number TRS01. The registration document of your Multistrada 1260 Enduro shows the details needed to confirm the fit. If your Multistrada 1260 Enduro falls outside 2019-2021, the fit of TRS01 cannot be assumed. Part number TRS01 is shared with Ducati DesertX, Ducati Diavel, Ducati Diavel 1260, Ducati Diavel 1260 S; the fit is identical, the product pages are separate. Inter-Pace will gladly check TRS01 against your motorcycle if you send us the model and year.\u003c\/p\u003e\u003ch2\u003eChoosing the Colour\u003c\/h2\u003e\u003cp\u003eFor the machine with its own colour scheme, the anodised finish of TRS01 (red, gold and black) can echo it in metal.\u003c\/p\u003e\u003ch2\u003eApproval Status\u003c\/h2\u003e\u003cp\u003ePlease be aware that TRS01 is delivered without any form of type approval. In some countries even cosmetic parts such as TRS01 must meet specific rules, so please inform yourself. A local inspection body can tell you whether TRS01 needs to be registered or inspected.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Ducabike\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e TRS01\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Billet aluminium, machined from solid\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Coloured anodising\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Red, gold and black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Multistrada 1260 Enduro (2019-2021)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ducabike","offers":[{"title":"Anodised Black","offer_id":54107943797002,"sku":"TRS01D","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Red","offer_id":54107943731466,"sku":"TRS01A","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Gold","offer_id":54107943764234,"sku":"TRS01B","price":16.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ducabike-trs01d_1.png?v=1794416568"},{"product_id":"ducabike-left-front-wheel-cap-ducati-multistrada-1260-s-2018-2020-trs01","title":"Ducabike Left Front Wheel Cap Ducati Multistrada 1260 S (2018-2020) – TRS01","description":"\u003cp\u003eIf you ride a Ducati Multistrada 1260 S from 2018-2020, Ducabike designed reference TRS01 with exactly that motorcycle in mind. Where the Ducati Multistrada 1260 S had the original part, it now carries a part with crisp machined edges and an even anodised surface. Upgrading the original part to billet aluminium is a modest change for the Ducati Multistrada 1260 S, yet one you see every day.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSolid-machined aluminium construction\u003c\/li\u003e\n\u003cli\u003eSupplied as a single part\u003c\/li\u003e\n\u003cli\u003eAvailable anodised in red, gold and black\u003c\/li\u003e\n\u003cli\u003eFits in place of the original part\u003c\/li\u003e\n\u003cli\u003eSpecific fitment: Ducati Multistrada 1260 S (2018-2020)\u003c\/li\u003e\n\u003cli\u003eDesigned and made in Italy by Ducabike (DBK Special Parts)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eMaterial Details\u003c\/h2\u003e\u003cp\u003eIn place of the original part, you fit a part that Ducabike machines from a single piece of aluminium. Every surface of reference TRS01 is shaped by cutting, which is what billet manufacture means. Machined contours give TRS01 a crisp outline that stands up to close inspection. Reference TRS01 is shaped to follow the original design lines, so it does not look like an add-on.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eMatching the Ducabike records, this page offers TRS01 for the Ducati Multistrada 1260 S from 2018-2020. Check the year of manufacture of your Multistrada 1260 S and compare it with 2018-2020 on this listing. Take a moment to compare the year of your Multistrada 1260 S with 2018-2020 before ordering TRS01. For Ducati DesertX, Ducati Diavel, Ducati Diavel 1260, Ducati Diavel 1260 S, the same reference TRS01 applies; select the listing that names your motorcycle. We are glad to answer fitment questions on TRS01 before you order.\u003c\/p\u003e\u003ch2\u003eCare Notes\u003c\/h2\u003e\u003cp\u003eFor the part, gentle cleaning works better than strong chemicals. With simple, regular care, the anodised finish keeps its colour for a long time. Brake fluid can damage paint and finishes, so wipe up any spill straight away.\u003c\/p\u003e\u003ch2\u003eColour and Finish\u003c\/h2\u003e\u003cp\u003eMany owners match the colour of TRS01 to the frame, wheels or paint accents of their machine.\u003c\/p\u003e\u003ch2\u003eFitting the Part\u003c\/h2\u003e\u003cp\u003eInstallation follows a simple logic: out with the original part, in with TRS01. Ducabike designs TRS01 to replace the original part over the left end of the front wheel axle, using the existing mounting. One machined part is what you get with TRS01, enough to take the place of the original part. Fitting the Ducabike part needs care more than special skill. Simple as the job is, patience and attention still pay off when fitting the left front wheel cap.\u003c\/p\u003e\u003ch2\u003eRoad Use Notes\u003c\/h2\u003e\u003cp\u003eThe part leaves Ducabike without ABE paperwork or an expert opinion. A local inspection body can tell you whether TRS01 needs to be registered or inspected. If you are unsure, take the bike with TRS01 fitted to an approved inspection centre for advice.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Ducabike\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e TRS01\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Billet aluminium, machined from solid\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Coloured anodising\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Red, gold and black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Multistrada 1260 S (2018-2020)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ducabike","offers":[{"title":"Anodised Black","offer_id":54107944026378,"sku":"TRS01D","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Red","offer_id":54107943960842,"sku":"TRS01A","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Gold","offer_id":54107943993610,"sku":"TRS01B","price":16.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ducabike-trs01d_1.png?v=1794416568"},{"product_id":"ducabike-left-front-wheel-cap-ducati-multistrada-1260-pikes-peak-2018-2020-trs01","title":"Ducabike Left Front Wheel Cap Ducati Multistrada 1260 Pikes Peak (2018-2020) – TRS01","description":"\u003cp\u003eInter-Pace lists reference TRS01 here for the Ducati Multistrada 1260 Pikes Peak (2018-2020): the left front wheel cap by Ducabike in anodised aluminium. Nothing about how the Multistrada 1260 Pikes Peak rides changes; what changes is the quality of the detail over the left end of the front wheel axle. Factory parts are built for volume; the Ducabike part for the Multistrada 1260 Pikes Peak is cut from solid aluminium instead.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMachined from solid billet aluminium\u003c\/li\u003e\n\u003cli\u003eOne part in the box\u003c\/li\u003e\n\u003cli\u003eColour choice: red, gold and black\u003c\/li\u003e\n\u003cli\u003eReplaces the original part, no modifications needed\u003c\/li\u003e\n\u003cli\u003eFitment per Ducabike: Ducati Multistrada 1260 Pikes Peak, 2018-2020\u003c\/li\u003e\n\u003cli\u003eDesigned and made in Italy by Ducabike (DBK Special Parts)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eShade and Finish\u003c\/h2\u003e\u003cp\u003ePick a shade for TRS01 from the options listed, red, gold and black, to suit your bike.\u003c\/p\u003e\u003ch2\u003eCompatibility Details\u003c\/h2\u003e\u003cp\u003eDucabike designates the Ducati Multistrada 1260 Pikes Peak (2018-2020) as the fitting motorcycle for TRS01. Does your Multistrada 1260 Pikes Peak date from outside 2018-2020? Please get in touch before ordering. The fit of TRS01 depends on the exact model, so please confirm you own the Ducati Multistrada 1260 Pikes Peak. Inter-Pace offers TRS01 for Ducati DesertX, Ducati Diavel, Ducati Diavel 1260, Ducati Diavel 1260 S too, so every owner finds the page with the right bike name. Getting the right part first time is easier with the reference to hand: TRS01.\u003c\/p\u003e\u003ch2\u003eMachined from the Solid\u003c\/h2\u003e\u003cp\u003eSolid aluminium, machined in Italy, is the basis of the Ducabike left front wheel cap. Italian production and billet aluminium are the two basics of the Ducabike left front wheel cap. Even next to factory components with a high-quality finish, the left front wheel cap holds its own. A stable, accurately machined part like TRS01 keeps the motorcycle looking sharp long after the first ride.\u003c\/p\u003e\u003ch2\u003eLooking After Anodised Aluminium\u003c\/h2\u003e\u003cp\u003eBug and tar removers should be tried on a hidden area first before going near TRS01. Road salt in winter should be rinsed off promptly, from TRS01 as well as from the whole bike. Check TRS01 now and then for dirt building up around its edges.\u003c\/p\u003e\u003ch2\u003eWhat the Swap Involves\u003c\/h2\u003e\u003cp\u003eAs a ready-to-fit part, TRS01 goes straight in place of the original part. Installation follows a simple logic: out with the original part, in with TRS01. Included is one anodised aluminium part, reference TRS01. Tighten the fixings of TRS01 evenly and with feeling, as aluminium threads deserve care. Fitting TRS01 is straightforward for anyone used to basic work.\u003c\/p\u003e\u003ch2\u003eApproval Notes\u003c\/h2\u003e\u003cp\u003eFor reference TRS01, Ducabike provides neither a general type approval (ABE) nor a parts certificate. A local inspection body can tell you whether TRS01 needs to be registered or inspected. Regulations differ between countries, and only the local authorities can give a binding answer.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Ducabike\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e TRS01\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Billet aluminium, machined from solid\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Coloured anodising\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Red, gold and black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Multistrada 1260 Pikes Peak (2018-2020)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ducabike","offers":[{"title":"Anodised Black","offer_id":54107944124682,"sku":"TRS01D","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Red","offer_id":54107944059146,"sku":"TRS01A","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Gold","offer_id":54107944091914,"sku":"TRS01B","price":16.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ducabike-trs01d_1.png?v=1794416568"},{"product_id":"ducabike-left-front-wheel-cap-ducati-multistrada-950-2017-2021-trs01","title":"Ducabike Left Front Wheel Cap Ducati Multistrada 950 (2017-2021) – TRS01","description":"\u003cp\u003eReference TRS01 is the Ducabike left front wheel cap catalogued for the Ducati Multistrada 950 produced 2017-2021. Removing the original part and fitting the Ducabike part gives the Multistrada 950 a tidier, more crafted appearance. Where the Ducati Multistrada 950 had the original part, it now carries a part with crisp machined edges and an even anodised surface.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSolid-machined aluminium construction\u003c\/li\u003e\n\u003cli\u003eOne part in the box\u003c\/li\u003e\n\u003cli\u003eAvailable anodised in red, gold and black\u003c\/li\u003e\n\u003cli\u003eReplaces the original part, no modifications needed\u003c\/li\u003e\n\u003cli\u003eMade to fit the Ducati Multistrada 950 (2017-2021)\u003c\/li\u003e\n\u003cli\u003eMade in Italy by Ducabike\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eLooking After the Finish\u003c\/h2\u003e\u003cp\u003eWarm water with a little mild detergent is enough to clean TRS01. Riding in all weathers is fine, as long as the bike is cleaned and dried afterwards. Check TRS01 now and then for dirt building up around its edges.\u003c\/p\u003e\u003ch2\u003eColours Available\u003c\/h2\u003e\u003cp\u003eAnodised in red, gold and black, the left front wheel cap can either match existing accents or set a deliberate contrast.\u003c\/p\u003e\u003ch2\u003eCompatible Motorcycle\u003c\/h2\u003e\u003cp\u003eWe list TRS01 for the Ducati Multistrada 950 (2017-2021) because Ducabike names exactly that bike for the part. This listing covers only the Ducati Multistrada 950; other motorcycles have separate pages, even within the same range. The papers of your bike name model and year precisely; they should read Ducati Multistrada 950 and fall within 2017-2021. Inter-Pace keeps separate listings for Ducati DesertX, Ducati Diavel, Ducati Diavel 1260, Ducati Diavel 1260 S, all with Ducabike reference TRS01. Have the model and year ready when you contact Inter-Pace about TRS01.\u003c\/p\u003e\u003ch2\u003eWhat Is in the Box\u003c\/h2\u003e\u003cp\u003eThe Ducabike left front wheel cap uses the existing mounting over the left end of the front wheel axle, with no changes to the bike. Where the original part sat before, reference TRS01 now takes over. Ducabike supplies TRS01 individually, as one part. Basic hand tools in good condition are normally all you need to fit TRS01. Handle the anodised surface of TRS01 gently, as metal tools can leave scratches.\u003c\/p\u003e\u003ch2\u003eMaterial and Anodised Finish\u003c\/h2\u003e\u003cp\u003eEvery contour of TRS01 is cut by Ducabike from billet, which keeps the part true to its design. Ducabike chooses billet aluminium for TRS01 because it can be machined precisely and keeps its form. Precisely machined surfaces let reference TRS01 sit flush with the parts around it. Edges, faces and transitions on TRS01 are machined cleanly, with no rough spots left behind.\u003c\/p\u003e\u003ch2\u003eLegal Notes\u003c\/h2\u003e\u003cp\u003eNo ABE or expert report is supplied by Ducabike with TRS01. Track use is a separate matter; for public roads, the regulations of your country apply. An inspection body such as TÜV or DEKRA can advise you whether TRS01 needs to be entered or approved.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Ducabike\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e TRS01\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Billet aluminium, machined from solid\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Coloured anodising\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Red, gold and black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Multistrada 950 (2017-2021)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ducabike","offers":[{"title":"Anodised Black","offer_id":54107944517898,"sku":"TRS01D","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Red","offer_id":54107944452362,"sku":"TRS01A","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Gold","offer_id":54107944485130,"sku":"TRS01B","price":16.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ducabike-trs01d_1.png?v=1794416568"},{"product_id":"ducabike-left-front-wheel-cap-ducati-multistrada-v2-2022-2024-trs01","title":"Ducabike Left Front Wheel Cap Ducati Multistrada V2 (2022-2024) – TRS01","description":"\u003cp\u003eModel years 2022-2024 of the Ducati Multistrada V2 are what Ducabike names for reference TRS01, the left front wheel cap on this page. The visual result on the Ducati Multistrada V2 is a crisp anodised piece over the left end of the front wheel axle rather than the original part. A touch of anodised colour over the left end of the front wheel axle is often all the Multistrada V2 needs to look more personal.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMachined from solid billet aluminium\u003c\/li\u003e\n\u003cli\u003eSupplied as a single part\u003c\/li\u003e\n\u003cli\u003eAvailable anodised in red, gold and black\u003c\/li\u003e\n\u003cli\u003eFits in place of the original part\u003c\/li\u003e\n\u003cli\u003eFitment per Ducabike: Ducati Multistrada V2, 2022-2024\u003c\/li\u003e\n\u003cli\u003eDesigned and made in Italy by Ducabike (DBK Special Parts)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eChecking Your Bike\u003c\/h2\u003e\u003cp\u003eMatching the Ducabike records, this page offers TRS01 for the Ducati Multistrada V2 from 2022-2024. The year range 2022-2024 is part of the fitment for the Multistrada V2, not just a detail. Special series and limited editions of the Multistrada V2 can differ, so check the details first. For Ducati DesertX, Ducati Diavel, Ducati Diavel 1260, Ducati Diavel 1260 S, the same reference TRS01 applies; select the listing that names your motorcycle. Cross-check the Ducabike number TRS01 with the maker's catalogue before ordering.\u003c\/p\u003e\u003ch2\u003eColour Matching\u003c\/h2\u003e\u003cp\u003eAnodised colours look different in daylight and in the garage, so the product photos are a useful guide.\u003c\/p\u003e\u003ch2\u003eThe Aluminium Behind the Part\u003c\/h2\u003e\u003cp\u003eAluminium machined from the solid is the material of choice for reference TRS01. Reference TRS01 owes its precise shape to machining from billet, the method Ducabike uses across its aluminium range. Precisely machined surfaces let reference TRS01 sit flush with the parts around it. Aluminium milled to shape stays true, which keeps the part sitting correctly for years.\u003c\/p\u003e\u003ch2\u003eFitting Notes\u003c\/h2\u003e\u003cp\u003eReady to fit means the part is finished and anodised when it reaches you. The Ducabike part mounts where the original part sat, over the left end of the front wheel axle. Scope of supply for TRS01: a single machined part. If you have little experience with motorcycle maintenance, let a workshop fit TRS01. Park the machine securely, ideally on a stand, before you begin the swap.\u003c\/p\u003e\u003ch2\u003eCare Notes\u003c\/h2\u003e\u003cp\u003eClean TRS01 when the bike has cooled down, not in direct sun on a hot surface. Leaning a helmet or keys against TRS01 can leave marks, so give the part some space. Spilled brake fluid should never be left, because it can damage paintwork within a short time.\u003c\/p\u003e\u003ch2\u003eApproval Notes\u003c\/h2\u003e\u003cp\u003eDocuments for road approval are not available for the left front wheel cap. Since TRS01 replaces the original part, check what your national rules say before using the motorcycle on public roads. When you are unsure about TRS01, your nearest vehicle testing station can advise.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Ducabike\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e TRS01\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Billet aluminium, machined from solid\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Coloured anodising\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Red, gold and black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Multistrada V2 (2022-2024)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ducabike","offers":[{"title":"Anodised Black","offer_id":54107944616202,"sku":"TRS01D","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Red","offer_id":54107944550666,"sku":"TRS01A","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Gold","offer_id":54107944583434,"sku":"TRS01B","price":16.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ducabike-trs01d_1.png?v=1794416568"},{"product_id":"ducabike-left-front-wheel-cap-ducati-multistrada-v2-s-2022-2024-trs01","title":"Ducabike Left Front Wheel Cap Ducati Multistrada V2 S (2022-2024) – TRS01","description":"\u003cp\u003eSpecifically for the Ducati Multistrada V2 S (2022-2024), Ducabike mills the Left Front Wheel Cap TRS01 from solid aluminium. A stock part does its job, and the Ducabike version does the same job on the Ducati Multistrada V2 S with more visual care. On a well-kept Ducati Multistrada V2 S, small details like TRS01 are what set it apart from a standard machine.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMachined from solid billet aluminium\u003c\/li\u003e\n\u003cli\u003eAnodised finish in red, gold and black\u003c\/li\u003e\n\u003cli\u003eOne part in the box\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the original part\u003c\/li\u003e\n\u003cli\u003eFitment per Ducabike: Ducati Multistrada V2 S, 2022-2024\u003c\/li\u003e\n\u003cli\u003eMade in Italy by Ducabike\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eItalian Machining\u003c\/h2\u003e\u003cp\u003eMachined rather than moulded: reference TRS01 is solid aluminium from the core to the surface. Reference TRS01 owes its precise shape to machining from billet, the method Ducabike uses across its aluminium range. Precisely machined surfaces let reference TRS01 sit flush with the parts around it. Billet parts like TRS01 tend to age well, as solid aluminium does not warp like plastic.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eMade for the Ducati Multistrada V2 S (2022-2024): that is how Ducabike classifies reference TRS01. Only the Ducati Multistrada V2 S (2022-2024) is covered by this listing, so check your model carefully. Bikes imported from other markets may be designated differently, so compare your papers with Ducati Multistrada V2 S. With Ducati DesertX, Ducati Diavel, Ducati Diavel 1260, Ducati Diavel 1260 S, the part number stays TRS01; only the product page changes. Our customer service at Inter-Pace can look up TRS01 in the Ducabike data for you.\u003c\/p\u003e\u003ch2\u003eCare for Anodised Parts\u003c\/h2\u003e\u003cp\u003eMild, pH-neutral cleaners keep the colour of the part fresh. Avoid resting tools or keys on TRS01, as hard objects can mark the anodised surface of the part. Brake fluid can damage paint and finishes, so wipe up any spill straight away.\u003c\/p\u003e\u003ch2\u003eChoosing the Colour\u003c\/h2\u003e\u003cp\u003ePairing TRS01 with other Ducabike parts in the same shade gives the motorcycle a consistent, planned appearance.\u003c\/p\u003e\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\u003cp\u003eDucabike makes TRS01 as a direct replacement, fitted over the left end of the front wheel axle using the original mounting. The Ducabike part mounts where the original part sat, over the left end of the front wheel axle. This listing covers one piece, enough to replace the original part. After a few rides, check that TRS01 is still firmly in place. Avoid unprotected pliers on the anodised surface of TRS01, as they leave marks on the part.\u003c\/p\u003e\u003ch2\u003eRoad Use and Approval\u003c\/h2\u003e\u003cp\u003eAs far as approval is concerned, TRS01 has no paperwork from Ducabike. An inspection body such as TÜV or DEKRA can advise you whether TRS01 needs to be entered or approved. In some countries even cosmetic parts such as TRS01 must meet specific rules, so please inform yourself.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Ducabike\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e TRS01\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Billet aluminium, machined from solid\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Coloured anodising\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Red, gold and black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Multistrada V2 S (2022-2024)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ducabike","offers":[{"title":"Anodised Black","offer_id":54107944714506,"sku":"TRS01D","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Red","offer_id":54107944648970,"sku":"TRS01A","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Gold","offer_id":54107944681738,"sku":"TRS01B","price":16.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ducabike-trs01d_1.png?v=1794416568"},{"product_id":"ducabike-left-front-wheel-cap-ducati-multistrada-v4-2021-2026-trs01","title":"Ducabike Left Front Wheel Cap Ducati Multistrada V4 (2021-2026) – TRS01","description":"\u003cp\u003eDucabike's answer to the original part on the Ducati Multistrada V4 (2021-2026) is the billet left front wheel cap sold as TRS01. Swapping out the original part for billet aluminium makes a difference on the Multistrada V4 you notice at a glance. Function stays the same as with the original part, while the Multistrada V4 gains Italian billet craftsmanship in plain sight.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBillet aluminium, machined from a solid block\u003c\/li\u003e\n\u003cli\u003eOne part in the box\u003c\/li\u003e\n\u003cli\u003eAvailable anodised in red, gold and black\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the original part\u003c\/li\u003e\n\u003cli\u003eFitment per Ducabike: Ducati Multistrada V4, 2021-2026\u003c\/li\u003e\n\u003cli\u003eDesigned and made in Italy by Ducabike (DBK Special Parts)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePick Your Shade\u003c\/h2\u003e\u003cp\u003eAnodised colours look different in daylight and in the garage, so the product photos are a useful guide.\u003c\/p\u003e\u003ch2\u003eIs This the Right Part?\u003c\/h2\u003e\u003cp\u003eThe 2021-2026 Ducati Multistrada V4 is the target bike for the Ducabike left front wheel cap with reference TRS01. Does your Multistrada V4 date from outside 2021-2026? Please get in touch before ordering. The Ducati Multistrada V4 listed here may share its name with other versions, so confirm the years 2021-2026. Ducabike's list shows TRS01 for Ducati DesertX, Ducati Diavel, Ducati Diavel 1260, Ducati Diavel 1260 S as well, and Inter-Pace lists every one of these bikes on its own page. Our customer service at Inter-Pace can look up TRS01 in the Ducabike data for you.\u003c\/p\u003e\u003ch2\u003eCare and Maintenance\u003c\/h2\u003e\u003cp\u003eKeep polishing compounds away from TRS01, as they can wear away the anodised colour. When topping up fluids, cover nearby surfaces and clean up spills immediately. Leaning a helmet or keys against TRS01 can leave marks, so give the part some space.\u003c\/p\u003e\u003ch2\u003eFrom Solid Block to Finished Part\u003c\/h2\u003e\u003cp\u003eMilling from the solid, as Ducabike does for TRS01, gives the part dense material and precise contours. From raw billet to finished left front wheel cap, the part is produced by Ducabike in Italy. Solid aluminium and careful finishing give the part a quality you notice each time you walk past the bike. Billet aluminium holds its shape, so reference TRS01 keeps fitting as it did on day one.\u003c\/p\u003e\u003ch2\u003eFitting the Part\u003c\/h2\u003e\u003cp\u003eThe Ducabike part mounts where the original part sat, over the left end of the front wheel axle. Since the part arrives finished, fitting is limited to removing the old part and installing the new one. For TRS01, one piece is included, finished in the selected colour. Take your time, as a careful swap protects both the new part and the surrounding components. A workshop familiar is the right place if you prefer not to do the work yourself.\u003c\/p\u003e\u003ch2\u003eApproval Status\u003c\/h2\u003e\u003cp\u003eThe manufacturer has not issued an ABE for TRS01, and none is included. Inter-Pace cannot give legal advice for your country, but a testing organisation can tell you whether TRS01 is acceptable. Whether the change is acceptable on the road depends on the regulations where you live.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Ducabike\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e TRS01\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Billet aluminium, machined from solid\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Coloured anodising\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Red, gold and black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Multistrada V4 (2021-2026)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ducabike","offers":[{"title":"Anodised Black","offer_id":54107944812810,"sku":"TRS01D","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Red","offer_id":54107944747274,"sku":"TRS01A","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Gold","offer_id":54107944780042,"sku":"TRS01B","price":16.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ducabike-trs01d_1.png?v=1794416568"},{"product_id":"ducabike-left-front-wheel-cap-ducati-multistrada-v4-rally-2023-2026-trs01","title":"Ducabike Left Front Wheel Cap Ducati Multistrada V4 Rally (2023-2026) – TRS01","description":"\u003cp\u003eItalian-made reference TRS01 from Ducabike is meant for the Ducati Multistrada V4 Rally (2023-2026), where it stands in for the original part. With reference TRS01 fitted over the left end of the front wheel axle, the Ducati Multistrada V4 Rally gains a detail that matches its sporting character. Riders who have already added Ducabike parts will find that TRS01 continues the same machined look on the Multistrada V4 Rally.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBillet aluminium, machined from a solid block\u003c\/li\u003e\n\u003cli\u003eSupplied as a single part\u003c\/li\u003e\n\u003cli\u003eAvailable anodised in red, gold and black\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the original part\u003c\/li\u003e\n\u003cli\u003eMade to fit the Ducati Multistrada V4 Rally (2023-2026)\u003c\/li\u003e\n\u003cli\u003eMade in Italy by Ducabike\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBefore You Order\u003c\/h2\u003e\u003cp\u003eCompatible motorcycle according to Ducabike: Ducati Multistrada V4 Rally (2023-2026), part number TRS01. Please order TRS01 only if your motorcycle is the Ducati Multistrada V4 Rally built 2023-2026. To avoid a return, compare the production date of your Multistrada V4 Rally against 2023-2026 first. Owners of Ducati DesertX, Ducati Diavel, Ducati Diavel 1260, Ducati Diavel 1260 S will find TRS01 on a separate page named after their bike. Should the details on your papers differ from this listing, contact Inter-Pace and mention TRS01.\u003c\/p\u003e\u003ch2\u003eFinding the Right Colour\u003c\/h2\u003e\u003cp\u003eFor the bike with its own colour scheme, the anodised finish of TRS01 (red, gold and black) can echo it in metal.\u003c\/p\u003e\u003ch2\u003eConstruction and Material Quality\u003c\/h2\u003e\u003cp\u003eSolid aluminium, machined in Italy, is the basis of the Ducabike left front wheel cap. As an Italian maker of billet parts, Ducabike designs TRS01 specifically around the motorcycle. Sharp, clean edges make TRS01 look finished from every angle. Because it takes over from the original part at the same point, the Ducabike part blends with the surrounding layout.\u003c\/p\u003e\u003ch2\u003eCleaning Tips\u003c\/h2\u003e\u003cp\u003eKeep polishing compounds away from TRS01, as they can wear away the anodised colour. Avoid resting tools or keys on TRS01, as hard objects can mark the anodised surface of the part. Riding in all weathers is fine, as long as the bike is cleaned and dried afterwards.\u003c\/p\u003e\u003ch2\u003eFitting Notes\u003c\/h2\u003e\u003cp\u003eFitting TRS01 over the left end of the front wheel axle is a matter of exchanging parts, not modifying the motorcycle. The Ducabike left front wheel cap uses the existing mounting over the left end of the front wheel axle, with no changes to the bike. The box contains one Ducabike part, reference TRS01, in the colour you selected. A clean, well-lit workspace makes fitting TRS01 easier and safer. If you are unsure about fitting TRS01, a specialist workshop can install it for you.\u003c\/p\u003e\u003ch2\u003eLegal Notes\u003c\/h2\u003e\u003cp\u003eApproval status of TRS01: no ABE, no parts certificate, no expert report from Ducabike. Track use is a separate matter; for public roads, the regulations of your country apply. Since TRS01 replaces the original part, check what your national rules say before using the bike on public roads.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Ducabike\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e TRS01\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Billet aluminium, machined from solid\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Coloured anodising\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Red, gold and black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Multistrada V4 Rally (2023-2026)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ducabike","offers":[{"title":"Anodised Black","offer_id":54107944943882,"sku":"TRS01D","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Red","offer_id":54107944878346,"sku":"TRS01A","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Gold","offer_id":54107944911114,"sku":"TRS01B","price":16.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ducabike-trs01d_1.png?v=1794416568"},{"product_id":"ducabike-left-front-wheel-cap-ducati-multistrada-v4-rs-2024-2026-trs01","title":"Ducabike Left Front Wheel Cap Ducati Multistrada V4 RS (2024-2026) – TRS01","description":"\u003cp\u003eChoose the Ducabike Left Front Wheel Cap TRS01 if you own the Ducati Multistrada V4 RS (2024-2026) and want billet aluminium in place of the original part. Fitted over the left end of the front wheel axle, reference TRS01 turns a functional spot on the Multistrada V4 RS into a visible detail in anodised aluminium. The visual result on the Ducati Multistrada V4 RS is a crisp anodised piece over the left end of the front wheel axle rather than the original part.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSolid-machined aluminium construction\u003c\/li\u003e\n\u003cli\u003eOne part in the box\u003c\/li\u003e\n\u003cli\u003eAnodised finish in red, gold and black\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the original part\u003c\/li\u003e\n\u003cli\u003eSpecific fitment: Ducati Multistrada V4 RS (2024-2026)\u003c\/li\u003e\n\u003cli\u003eDesigned and made in Italy by Ducabike (DBK Special Parts)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eModel and Year Check\u003c\/h2\u003e\u003cp\u003eCovering 2024-2026, the Ducabike listing for TRS01 names the Ducati Multistrada V4 RS as the matching motorcycle. Special series and limited editions of the Multistrada V4 RS can differ, so check the details first. Does your Multistrada V4 RS date from outside 2024-2026? Please get in touch before ordering. Shared fitment: TRS01 is catalogued by Ducabike for Ducati DesertX, Ducati Diavel, Ducati Diavel 1260, Ducati Diavel 1260 S too. Ducabike's own reference TRS01 is the number to quote for the part in any enquiry.\u003c\/p\u003e\u003ch2\u003eColour and Finish\u003c\/h2\u003e\u003cp\u003eSubtle or striking: the colour you choose for the left front wheel cap (red, gold and black) sets the tone of the detail.\u003c\/p\u003e\u003ch2\u003eSwapping the Original Part\u003c\/h2\u003e\u003cp\u003eDelivered ready for installation, TRS01 needs only the removal of the original part. Delivered ready to install, the part is fitted over the left end of the front wheel axle in place of the original part. The delivery contains a single anodised part, reference TRS01. Handle the anodised surface of TRS01 gently, as metal tools can leave scratches. Store the original part safely in case you ever want to go back to standard.\u003c\/p\u003e\u003ch2\u003eLooking After the Finish\u003c\/h2\u003e\u003cp\u003eRinse off shampoo residue from TRS01 thoroughly, as dried cleaner can leave streaks. Keep a clean cloth in the garage, so drips of brake fluid near TRS01 can be removed at once. With simple, regular care, the anodised finish keeps its colour for a long time.\u003c\/p\u003e\u003ch2\u003eBillet Aluminium from Italy\u003c\/h2\u003e\u003cp\u003eFrom raw billet to finished left front wheel cap, the part is produced by Ducabike in Italy. Ducabike produces the left front wheel cap in Italy, machining every piece from billet aluminium. The machined surface reflects light differently from moulded parts, which adds depth to the look. The surface quality of TRS01 shows up close, and that is exactly where riders look.\u003c\/p\u003e\u003ch2\u003eRoad Approval\u003c\/h2\u003e\u003cp\u003eThere is no approval document from Ducabike for the part, so none is included. Whether the change is acceptable on the road depends on the regulations where you live. Rules for parts that take the place of the original part differ from country to country, so check before riding the machine.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Ducabike\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e TRS01\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Billet aluminium, machined from solid\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Coloured anodising\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Red, gold and black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Multistrada V4 RS (2024-2026)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ducabike","offers":[{"title":"Anodised Black","offer_id":54107945074954,"sku":"TRS01D","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Red","offer_id":54107945009418,"sku":"TRS01A","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Gold","offer_id":54107945042186,"sku":"TRS01B","price":16.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ducabike-trs01d_1.png?v=1794416568"},{"product_id":"ducabike-left-front-wheel-cap-ducati-multistrada-v4-s-2021-2026-trs01","title":"Ducabike Left Front Wheel Cap Ducati Multistrada V4 S (2021-2026) – TRS01","description":"\u003cp\u003eOwners of the 2021-2026 Ducati Multistrada V4 S looking for a sharper detail can start with the Ducabike Left Front Wheel Cap, reference TRS01. Plain factory finishes give way to anodised aluminium over the left end of the front wheel axle, which the Multistrada V4 S shows off well. Think of TRS01 as a finishing touch for the Ducati Multistrada V4 S, placed over the left end of the front wheel axle where the eye tends to land.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMachined from solid billet aluminium\u003c\/li\u003e\n\u003cli\u003eAvailable anodised in red, gold and black\u003c\/li\u003e\n\u003cli\u003eOne part in the box\u003c\/li\u003e\n\u003cli\u003eReplaces the original part, no modifications needed\u003c\/li\u003e\n\u003cli\u003eSpecific fitment: Ducati Multistrada V4 S (2021-2026)\u003c\/li\u003e\n\u003cli\u003eMade in Italy by Ducabike\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCare and Everyday Use\u003c\/h2\u003e\u003cp\u003eAggressive wheel cleaners and acidic products can damage anodising, so keep them away from TRS01. Keep a cloth to hand when working, so any brake fluid can be removed straight away. A covered parking spot protects TRS01 and the bike from sun, rain and dust.\u003c\/p\u003e\u003ch2\u003eConstruction and Material Quality\u003c\/h2\u003e\u003cp\u003eThe words Made in Italy are meant literally here, as Ducabike manufactures its billet parts there. From raw billet to finished left front wheel cap, the part is produced by Ducabike in Italy. Paired with the factory finish, the anodised aluminium of TRS01 is a clear step up in quality. Machined aluminium is form-stable, so TRS01 keeps its shape and fit over many seasons.\u003c\/p\u003e\u003ch2\u003eMounting and Delivery\u003c\/h2\u003e\u003cp\u003eThe billet part uses the factory position of the original part over the left end of the front wheel axle. On the machine, the Ducabike part simply goes in where the original part came off, over the left end of the front wheel axle. Included is one anodised aluminium part, reference TRS01. If you are unsure about fitting TRS01, a specialist workshop can install it for you. Should anything not line up as expected, stop and ask a workshop rather than forcing TRS01 into place.\u003c\/p\u003e\u003ch2\u003eIs This the Right Part?\u003c\/h2\u003e\u003cp\u003eWe took the fitment of TRS01 directly from Ducabike, which names the Ducati Multistrada V4 S (2021-2026). Check the year of manufacture of your Multistrada V4 S and compare it with 2021-2026 on this listing. Checking the chassis details of your Multistrada V4 S is a reliable way to confirm the right listing. Beyond the bike, Ducabike lists TRS01 for Ducati DesertX, Ducati Diavel, Ducati Diavel 1260, Ducati Diavel 1260 S, and Inter-Pace keeps one page per bike. Should the details on your papers differ from this listing, contact Inter-Pace and mention TRS01.\u003c\/p\u003e\u003ch2\u003eAnodised Colour Choice\u003c\/h2\u003e\u003cp\u003eThe colour selection for TRS01 (red, gold and black) lets you match it to levers, caps or covers already.\u003c\/p\u003e\u003ch2\u003eLegal Status\u003c\/h2\u003e\u003cp\u003eThe Ducabike delivery contains the part itself, but no certificate or approval. In some countries even cosmetic parts such as TRS01 must meet specific rules, so please inform yourself. Track use is a separate matter; for public roads, the regulations of your country apply.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Ducabike\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e TRS01\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Billet aluminium, machined from solid\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Coloured anodising\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Red, gold and black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Multistrada V4 S (2021-2026)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ducabike","offers":[{"title":"Anodised Black","offer_id":54107945337098,"sku":"TRS01D","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Red","offer_id":54107945271562,"sku":"TRS01A","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Gold","offer_id":54107945304330,"sku":"TRS01B","price":16.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ducabike-trs01d_1.png?v=1794416568"},{"product_id":"ducabike-left-front-wheel-cap-ducati-multistrada-v4-pikes-peak-2022-2026-trs01","title":"Ducabike Left Front Wheel Cap Ducati Multistrada V4 Pikes Peak (2022-2026) – TRS01","description":"\u003cp\u003eInter-Pace lists reference TRS01 here for the Ducati Multistrada V4 Pikes Peak (2022-2026): the left front wheel cap by Ducabike in anodised aluminium. Ducabike gives the Multistrada V4 Pikes Peak a precise, colour-matched detail over the left end of the front wheel axle that a stock part cannot offer. Function stays the same as with the original part, while the Multistrada V4 Pikes Peak gains Italian billet craftsmanship in plain sight.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSolid-machined aluminium construction\u003c\/li\u003e\n\u003cli\u003eOne part in the box\u003c\/li\u003e\n\u003cli\u003eAnodised finish in red, gold and black\u003c\/li\u003e\n\u003cli\u003eReplaces the original part, no modifications needed\u003c\/li\u003e\n\u003cli\u003eMade to fit the Ducati Multistrada V4 Pikes Peak (2022-2026)\u003c\/li\u003e\n\u003cli\u003eMade in Italy by Ducabike\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eColour and Finish\u003c\/h2\u003e\u003cp\u003eSelect your colour for TRS01 in the options on this page; Ducabike lists red, gold and black.\u003c\/p\u003e\u003ch2\u003eModel Years Covered\u003c\/h2\u003e\u003cp\u003eInter-Pace has assigned TRS01 to the Ducati Multistrada V4 Pikes Peak (2022-2026) on the basis of the Ducabike compatibility list. Your dealer or the vehicle papers can confirm that you ride the Ducati Multistrada V4 Pikes Peak (2022-2026). Model names can be similar across generations, so make sure your bike really is the Ducati Multistrada V4 Pikes Peak. You will also find reference TRS01 for Ducati DesertX, Ducati Diavel, Ducati Diavel 1260, Ducati Diavel 1260 S, with a dedicated listing for every motorcycle. Write to Inter-Pace with your model, year and the reference TRS01 if you need a second opinion.\u003c\/p\u003e\u003ch2\u003eMaterial and Anodised Finish\u003c\/h2\u003e\u003cp\u003eSolid aluminium, machined in Italy, is the basis of the Ducabike left front wheel cap. The aluminium of TRS01 is a light alloy, machined by Ducabike in Italy to suit the machine. Aluminium milled to shape stays true, which keeps the part sitting correctly for years. On closer inspection you notice the finish quality Ducabike gives the left front wheel cap.\u003c\/p\u003e\u003ch2\u003eMounting and Delivery\u003c\/h2\u003e\u003cp\u003eInstallation follows a simple logic: out with the original part, in with TRS01. Reference TRS01 comes finished and anodised, ready to take the place of the original part. For the motorcycle, Ducabike packs TRS01 as one single billet piece. Use well-fitting tools so the fixings and the anodised surface of TRS01 stay unmarked. Working slowly and methodically keeps the new part and the bike free of damage.\u003c\/p\u003e\u003ch2\u003eCleaning Tips\u003c\/h2\u003e\u003cp\u003eWipe road dirt from TRS01 regularly; the part stays brighter with gentle, frequent care. Riding in all weathers is fine, as long as the bike is cleaned and dried afterwards. A wax or protective spray for motorcycles should be tested on a small area before it touches TRS01.\u003c\/p\u003e\u003ch2\u003eRoad Use Notes\u003c\/h2\u003e\u003cp\u003eReference TRS01 is sold without type approval documents from the manufacturer. Track use is a separate matter; for public roads, the regulations of your country apply. When you are unsure about TRS01, your nearest vehicle testing station can advise.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Ducabike\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e TRS01\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Billet aluminium, machined from solid\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Coloured anodising\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Red, gold and black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Multistrada V4 Pikes Peak (2022-2026)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ducabike","offers":[{"title":"Anodised Black","offer_id":54107945599242,"sku":"TRS01D","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Red","offer_id":54107945533706,"sku":"TRS01A","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Gold","offer_id":54107945566474,"sku":"TRS01B","price":16.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ducabike-trs01d_1.png?v=1794416568"},{"product_id":"ducabike-left-front-wheel-cap-ducati-scrambler-1100-2018-2023-trs01","title":"Ducabike Left Front Wheel Cap Ducati Scrambler 1100 (2018-2023) – TRS01","description":"\u003cp\u003eSpecifically for the Ducati Scrambler 1100 (2018-2023), Ducabike mills the Left Front Wheel Cap TRS01 from solid aluminium. The visual result on the Ducati Scrambler 1100 is a crisp anodised piece over the left end of the front wheel axle rather than the original part. A stock part does its job, and the Ducabike version does the same job on the Ducati Scrambler 1100 with more visual care.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMachined from solid billet aluminium\u003c\/li\u003e\n\u003cli\u003eAnodised finish in red, gold and black\u003c\/li\u003e\n\u003cli\u003eSupplied as a single part\u003c\/li\u003e\n\u003cli\u003eFits in place of the original part\u003c\/li\u003e\n\u003cli\u003eFitment per Ducabike: Ducati Scrambler 1100, 2018-2023\u003c\/li\u003e\n\u003cli\u003eDesigned and made in Italy by Ducabike (DBK Special Parts)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCare for Anodised Parts\u003c\/h2\u003e\u003cp\u003eClean the anodised aluminium of TRS01 with mild soapy water and a soft cloth. Keep a cloth to hand when working, so any brake fluid can be removed straight away. Before topping up a reservoir, cover the surrounding parts with a cloth.\u003c\/p\u003e\u003ch2\u003eReady to Fit\u003c\/h2\u003e\u003cp\u003eSince the part arrives finished, fitting is limited to removing the old part and installing the new one. No drilling, cutting or painting is involved: TRS01 is a straight replacement for the original part. A single billet part replaces the original part; that is the full scope of supply. If you have little experience with motorcycle maintenance, let a workshop fit TRS01. Use tools that fit properly, so neither the fixings nor the anodised finish of TRS01 get damaged.\u003c\/p\u003e\u003ch2\u003eBillet Construction\u003c\/h2\u003e\u003cp\u003eIn place of the original part, you fit a part that Ducabike machines from a single piece of aluminium. Milling from the solid, as Ducabike does for TRS01, gives the part dense material and precise contours. Ducabike shapes TRS01 so that it sits neatly in its place. Billet aluminium holds its shape, so reference TRS01 keeps fitting as it did on day one.\u003c\/p\u003e\u003ch2\u003eWhich Bikes It Fits\u003c\/h2\u003e\u003cp\u003eTaken from the Ducabike application list: reference TRS01 for the Ducati Scrambler 1100 (2018-2023). The right listing depends on two things: the exact model, Ducati Scrambler 1100, and a build year within 2018-2023. To avoid a return, compare the production date of your Scrambler 1100 against 2018-2023 first. Beyond the bike, Ducabike lists TRS01 for Ducati DesertX, Ducati Diavel, Ducati Diavel 1260, Ducati Diavel 1260 S, and Inter-Pace keeps one page per bike. The Ducabike reference TRS01 identifies this part and helps avoid mix-ups between similar items.\u003c\/p\u003e\u003ch2\u003eColours Available\u003c\/h2\u003e\u003cp\u003eSubtle or striking: the colour you choose for the left front wheel cap (red, gold and black) sets the tone of the detail.\u003c\/p\u003e\u003ch2\u003eApproval and Local Rules\u003c\/h2\u003e\u003cp\u003eNo ABE or expert report is supplied by Ducabike with TRS01. Whether TRS01 may stay on the bike for road use is decided by the law where the bike is registered. Since TRS01 replaces the original part, check what your national rules say before using the motorcycle on public roads.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Ducabike\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e TRS01\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Billet aluminium, machined from solid\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Coloured anodising\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Red, gold and black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Scrambler 1100 (2018-2023)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ducabike","offers":[{"title":"Anodised Black","offer_id":54107945861386,"sku":"TRS01D","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Red","offer_id":54107945795850,"sku":"TRS01A","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Gold","offer_id":54107945828618,"sku":"TRS01B","price":16.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ducabike-trs01d_1.png?v=1794416568"},{"product_id":"ducabike-left-front-wheel-cap-ducati-scrambler-1100-special-2018-2019-trs01","title":"Ducabike Left Front Wheel Cap Ducati Scrambler 1100 Special (2018-2019) – TRS01","description":"\u003cp\u003eRiders of the Ducati Scrambler 1100 Special (2018-2019) can replace a plain factory detail with the anodised Ducabike Left Front Wheel Cap, reference TRS01. The Ducati Scrambler 1100 Special keeps its factory mounting points, while TRS01 replaces the plain stock look with milled aluminium. A stock part does its job, and the Ducabike version does the same job on the Ducati Scrambler 1100 Special with more visual care.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBillet aluminium, machined from a solid block\u003c\/li\u003e\n\u003cli\u003eSupplied as a single part\u003c\/li\u003e\n\u003cli\u003eColour choice: red, gold and black\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the original part\u003c\/li\u003e\n\u003cli\u003eMade to fit the Ducati Scrambler 1100 Special (2018-2019)\u003c\/li\u003e\n\u003cli\u003eMade in Italy by Ducabike\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eColour and Finish\u003c\/h2\u003e\u003cp\u003ePick a shade for TRS01 from the options listed, red, gold and black, to suit your bike.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eThe billet part uses the factory position of the original part over the left end of the front wheel axle. Every Ducabike part in this range is supplied finished, so no further work on the part is needed before fitting. The box contains one Ducabike part, reference TRS01, in the colour you selected. Working slowly and methodically keeps the new part and the bike free of damage. For anything beyond a simple swap, ask a qualified motorcycle workshop to help.\u003c\/p\u003e\u003ch2\u003eMachined from the Solid\u003c\/h2\u003e\u003cp\u003eDucabike's billet process starts with a solid aluminium block and ends with a finished, anodised part. Light alloy, worked from the solid in Italy, forms the body of TRS01. Aluminium milled to shape stays true, which keeps the part sitting correctly for years. Whether the motorcycle wears more Ducabike parts or none, TRS01 blends in as a coherent detail.\u003c\/p\u003e\u003ch2\u003eCompatible Motorcycle\u003c\/h2\u003e\u003cp\u003eGoing by the fitment data Ducabike publishes, code TRS01 belongs on the Ducati Scrambler 1100 Special (2018-2019). The right listing depends on two things: the exact model, Ducati Scrambler 1100 Special, and a build year within 2018-2019. Every Ducabike reference is tied to specific motorcycles, and this page covers the Ducati Scrambler 1100 Special alone. According to Ducabike, the billet piece TRS01 also belongs on Ducati DesertX, Ducati Diavel, Ducati Diavel 1260, Ducati Diavel 1260 S, which we list one by one. Ducabike's own reference TRS01 is the number to quote for the part in any enquiry.\u003c\/p\u003e\u003ch2\u003eLooking After Anodised Aluminium\u003c\/h2\u003e\u003cp\u003eStrong alkaline or acidic cleaners are not suitable for the anodised finish of TRS01. Spilled brake fluid should never be left, because it can damage paintwork within a short time. Road salt in winter should be rinsed off promptly, from TRS01 as well as from the whole bike.\u003c\/p\u003e\u003ch2\u003eLegal Status\u003c\/h2\u003e\u003cp\u003eFrom Ducabike, TRS01 comes with neither ABE nor parts certificate nor any test report. Responsibility for road use with TRS01 lies with the rider, so take a moment to check local law. In some countries even cosmetic parts such as TRS01 must meet specific rules, so please inform yourself.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Ducabike\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e TRS01\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Billet aluminium, machined from solid\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Coloured anodising\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Red, gold and black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Scrambler 1100 Special (2018-2019)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ducabike","offers":[{"title":"Anodised Black","offer_id":54107945959690,"sku":"TRS01D","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Red","offer_id":54107945894154,"sku":"TRS01A","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Gold","offer_id":54107945926922,"sku":"TRS01B","price":16.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ducabike-trs01d_1.png?v=1794416568"},{"product_id":"ducabike-left-front-wheel-cap-ducati-scrambler-1100-sport-2018-2025-trs01","title":"Ducabike Left Front Wheel Cap Ducati Scrambler 1100 Sport (2018-2025) – TRS01","description":"\u003cp\u003eDucabike in Italy produces reference TRS01, the left front wheel cap for the Scrambler 1100 Sport, for bikes built 2018-2025. Reference TRS01 brings solid, machined aluminium to a spot where a series part used to be, and the Scrambler 1100 Sport looks the better for it. Swapping out the original part for billet aluminium makes a difference on the Scrambler 1100 Sport you notice at a glance.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSolid-machined aluminium construction\u003c\/li\u003e\n\u003cli\u003eSupplied as a single part\u003c\/li\u003e\n\u003cli\u003eAnodised finish in red, gold and black\u003c\/li\u003e\n\u003cli\u003eReplaces the original part, no modifications needed\u003c\/li\u003e\n\u003cli\u003eFitment per Ducabike: Ducati Scrambler 1100 Sport, 2018-2025\u003c\/li\u003e\n\u003cli\u003eMade in Italy by Ducabike\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eThe Aluminium Behind the Part\u003c\/h2\u003e\u003cp\u003eReference TRS01 owes its precise shape to machining from billet, the method Ducabike uses across its aluminium range. Every surface of reference TRS01 is shaped by cutting, which is what billet manufacture means. Aluminium that has been machined accurately does not deform in normal use. Fit and finish of TRS01 are made to suit the factory design lines.\u003c\/p\u003e\u003ch2\u003eColour Matching\u003c\/h2\u003e\u003cp\u003eA matching colour on brake levers, caps or covers makes TRS01 look like part of a planned set.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eSwap the original part for TRS01 over the left end of the front wheel axle and the machine carries its new billet detail. Ducabike designs TRS01 to replace the original part over the left end of the front wheel axle, using the existing mounting. Ducabike supplies TRS01 individually, as one part. Lay a soft cloth over painted areas nearby before you start the swap. Take your time, as a careful swap protects both the new part and the surrounding components.\u003c\/p\u003e\u003ch2\u003eWhich Bikes It Fits\u003c\/h2\u003e\u003cp\u003eInter-Pace offers TRS01 on this page for one motorcycle only: the Ducati Scrambler 1100 Sport (2018-2025). The papers of your bike name model and year precisely; they should read Ducati Scrambler 1100 Sport and fall within 2018-2025. A Scrambler 1100 Sport built outside 2018-2025 may use different parts, so please check before you buy. Beyond the machine, Ducabike lists TRS01 for Ducati DesertX, Ducati Diavel, Ducati Diavel 1260, Ducati Diavel 1260 S, and Inter-Pace keeps one page per bike. Comparing TRS01 with the number in the Ducabike catalogue is a quick extra check.\u003c\/p\u003e\u003ch2\u003eCare and Everyday Use\u003c\/h2\u003e\u003cp\u003eAcidic rim cleaners and strong degreasers are not suitable for anodised aluminium. Store the machine under cover in winter to keep TRS01 and the rest of the bike in good shape. Riding in all weathers is fine, as long as the bike is cleaned and dried afterwards.\u003c\/p\u003e\u003ch2\u003eApproval Notes\u003c\/h2\u003e\u003cp\u003eThere is no approval document from Ducabike for the part, so none is included. Inter-Pace cannot give legal advice for your country, but a testing organisation can tell you whether TRS01 is acceptable. An inspection body such as TÜV or DEKRA can advise you whether TRS01 needs to be entered or approved.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Ducabike\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e TRS01\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Billet aluminium, machined from solid\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Coloured anodising\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Red, gold and black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Scrambler 1100 Sport (2018-2025)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ducabike","offers":[{"title":"Anodised Black","offer_id":54107946057994,"sku":"TRS01D","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Red","offer_id":54107945992458,"sku":"TRS01A","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Gold","offer_id":54107946025226,"sku":"TRS01B","price":16.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ducabike-trs01d_1.png?v=1794416568"},{"product_id":"ducabike-left-front-wheel-cap-ducati-scrambler-800-2015-2023-trs01","title":"Ducabike Left Front Wheel Cap Ducati Scrambler 800 (2015-2023) – TRS01","description":"\u003cp\u003eBillet aluminium from Italy for the Scrambler 800 (2015-2023): Ducabike offers the Left Front Wheel Cap under reference TRS01. The change is about looks and feel: a colour accent over the left end of the front wheel axle that ties in with the rest of the Scrambler 800. Plain factory finishes give way to anodised aluminium over the left end of the front wheel axle, which the Scrambler 800 shows off well.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMachined from solid billet aluminium\u003c\/li\u003e\n\u003cli\u003eAnodised finish in red, gold and black\u003c\/li\u003e\n\u003cli\u003eOne part in the box\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the original part\u003c\/li\u003e\n\u003cli\u003eMade to fit the Ducati Scrambler 800 (2015-2023)\u003c\/li\u003e\n\u003cli\u003eMade in Italy by Ducabike\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitting the Part\u003c\/h2\u003e\u003cp\u003eSince the part arrives finished, fitting is limited to removing the old part and installing the new one. The Ducabike part mounts where the original part sat, over the left end of the front wheel axle. In the box you will find one machined aluminium part, TRS01. If you are unsure about fitting TRS01, a specialist workshop can install it for you. Fitting the Ducabike part needs care more than special skill.\u003c\/p\u003e\u003ch2\u003eChecking Your Bike\u003c\/h2\u003e\u003cp\u003eFit on the Ducati Scrambler 800 (2015-2023) is stated by Ducabike for TRS01. Fitment is tied to the Ducati Scrambler 800; on other models the mounting position of TRS01 can differ. The Ducati Scrambler 800 listed here may share its name with other versions, so confirm the years 2015-2023. Is your motorcycle in this list: Ducati DesertX, Ducati Diavel, Ducati Diavel 1260, Ducati Diavel 1260 S? Then choose the page that carries its name; the reference stays TRS01. Cross-check the Ducabike number TRS01 with the maker's catalogue before ordering.\u003c\/p\u003e\u003ch2\u003eLooking After Anodised Aluminium\u003c\/h2\u003e\u003cp\u003eClean TRS01 when the bike has cooled down, not in direct sun on a hot surface. Fuel, oil and brake fluid should be wiped off the machine quickly to protect paint and finishes. A covered parking spot protects TRS01 and the bike from sun, rain and dust.\u003c\/p\u003e\u003ch2\u003eAnodised Colour Choice\u003c\/h2\u003e\u003cp\u003eSelect your colour for TRS01 in the options on this page; Ducabike lists red, gold and black.\u003c\/p\u003e\u003ch2\u003eMachined from the Solid\u003c\/h2\u003e\u003cp\u003eDucabike's billet process starts with a solid aluminium block and ends with a finished, anodised part. Light alloy, worked from the solid in Italy, forms the body of TRS01. Precisely machined surfaces let reference TRS01 sit flush with the parts around it. Fit and finish of TRS01 are made to suit the factory design lines.\u003c\/p\u003e\u003ch2\u003eLocal Regulations\u003c\/h2\u003e\u003cp\u003eFor reference TRS01, Ducabike provides neither a general type approval (ABE) nor a parts certificate. If you are unsure, take the bike with TRS01 fitted to an approved inspection centre for advice. An inspection body such as TÜV or DEKRA can advise you whether TRS01 needs to be entered or approved.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Ducabike\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e TRS01\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Billet aluminium, machined from solid\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Coloured anodising\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Red, gold and black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Scrambler 800 (2015-2023)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ducabike","offers":[{"title":"Anodised Black","offer_id":54107946221834,"sku":"TRS01D","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Red","offer_id":54107946156298,"sku":"TRS01A","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Gold","offer_id":54107946189066,"sku":"TRS01B","price":16.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ducabike-trs01d_1.png?v=1794416568"},{"product_id":"ducabike-left-front-wheel-cap-ducati-scrambler-sixty2-2016-2020-trs01","title":"Ducabike Left Front Wheel Cap Ducati Scrambler SIXTY2 (2016-2020) – TRS01","description":"\u003cp\u003eDucabike's answer to the original part on the Ducati Scrambler SIXTY2 (2016-2020) is the billet left front wheel cap sold as TRS01. One plain part swapped over the left end of the front wheel axle, and the Scrambler SIXTY2 immediately looks more considered. Swapping out the original part for billet aluminium makes a difference on the Scrambler SIXTY2 you notice at a glance.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBillet aluminium, machined from a solid block\u003c\/li\u003e\n\u003cli\u003eAvailable anodised in red, gold and black\u003c\/li\u003e\n\u003cli\u003eSupplied as a single part\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the original part\u003c\/li\u003e\n\u003cli\u003eSpecific fitment: Ducati Scrambler SIXTY2 (2016-2020)\u003c\/li\u003e\n\u003cli\u003eDesigned and made in Italy by Ducabike (DBK Special Parts)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitting the Part\u003c\/h2\u003e\u003cp\u003eWhere the original part sat before, reference TRS01 now takes over. Reference TRS01 arrives ready to fit and takes the place of the original part over the left end of the front wheel axle. This listing covers one piece, enough to replace the original part. Wipe the seat of the old part clean first, so no grit ends up beneath TRS01. Park the bike securely, ideally on a stand, before you begin the swap.\u003c\/p\u003e\u003ch2\u003eCompatible Motorcycle\u003c\/h2\u003e\u003cp\u003eReference TRS01 carries a Ducabike fitment entry for the Ducati Scrambler SIXTY2, built 2016-2020. The registration document of your Scrambler SIXTY2 shows the details needed to confirm the fit. If your Scrambler SIXTY2 falls outside 2016-2020, the fit of TRS01 cannot be assumed. Reference TRS01 is not exclusive to one motorcycle: Ducabike also names Ducati DesertX, Ducati Diavel, Ducati Diavel 1260, Ducati Diavel 1260 S. Check the reference TRS01 against the Ducabike list if you are comparing parts for several bikes besides the motorcycle.\u003c\/p\u003e\u003ch2\u003eMaterial and Anodised Finish\u003c\/h2\u003e\u003cp\u003eBillet means that Ducabike carves reference TRS01 out of solid aluminium instead of pressing or casting it. DBK Special Parts is the brand name Ducabike also uses today; reference TRS01 is made in Italy either way. Precisely machined surfaces let reference TRS01 sit flush with the parts around it. Sturdy billet construction means TRS01 copes with regular cleaning and handling without losing its shape.\u003c\/p\u003e\u003ch2\u003eColour and Finish\u003c\/h2\u003e\u003cp\u003eChoose the anodised colour that suits your bike; for TRS01 Ducabike offers red, gold and black.\u003c\/p\u003e\u003ch2\u003eCleaning and Upkeep\u003c\/h2\u003e\u003cp\u003eBug and tar removers should be tried on a hidden area first before going near TRS01. Store the bike under cover in winter to keep TRS01 and the rest of the bike in good shape. Leaning a helmet or keys against TRS01 can leave marks, so give the part some space.\u003c\/p\u003e\u003ch2\u003eLegal Status\u003c\/h2\u003e\u003cp\u003eThis motorcycle part comes without ABE, parts certificate or test report from the manufacturer. It is the rider's responsibility to make sure that fitting TRS01 complies with local law. Responsibility for road use with TRS01 lies with the rider, so take a moment to check local law.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Ducabike\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e TRS01\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Billet aluminium, machined from solid\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Coloured anodising\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Red, gold and black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Scrambler SIXTY2 (2016-2020)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ducabike","offers":[{"title":"Anodised Black","offer_id":54107946385674,"sku":"TRS01D","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Red","offer_id":54107946320138,"sku":"TRS01A","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Gold","offer_id":54107946352906,"sku":"TRS01B","price":16.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ducabike-trs01d_1.png?v=1794416568"},{"product_id":"ducabike-left-front-wheel-cap-ducati-streetfighter-848-2012-2015-trs01","title":"Ducabike Left Front Wheel Cap Ducati Streetfighter 848 (2012-2015) – TRS01","description":"\u003cp\u003eFrom the Ducabike range for the Ducati Streetfighter 848 (2012-2015), we offer the left front wheel cap with part number TRS01. Instead of a mass-produced piece, the Streetfighter 848 carries Italian billet work by Ducabike over the left end of the front wheel axle. Beyond the colour, reference TRS01 adds crisp machined lines to an area of the Streetfighter 848 that is usually overlooked.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSolid-machined aluminium construction\u003c\/li\u003e\n\u003cli\u003eSupplied as a single part\u003c\/li\u003e\n\u003cli\u003eColour choice: red, gold and black\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the original part\u003c\/li\u003e\n\u003cli\u003eSpecific fitment: Ducati Streetfighter 848 (2012-2015)\u003c\/li\u003e\n\u003cli\u003eDesigned and made in Italy by Ducabike (DBK Special Parts)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eChecking Your Bike\u003c\/h2\u003e\u003cp\u003eGoing by the fitment data Ducabike publishes, code TRS01 belongs on the Ducati Streetfighter 848 (2012-2015). Should your motorcycle have been modified, compare it closely with a standard Ducati Streetfighter 848 before ordering. For other model years of the Streetfighter 848, look for the matching product page rather than this one. Also compatible with TRS01, according to Ducabike: Ducati DesertX, Ducati Diavel, Ducati Diavel 1260, Ducati Diavel 1260 S, each on its own product page. The Ducabike reference TRS01 identifies this part and helps avoid mix-ups between similar items.\u003c\/p\u003e\u003ch2\u003eWhat the Swap Involves\u003c\/h2\u003e\u003cp\u003eEvery Ducabike part in this range is supplied finished, so no further work on the part is needed before fitting. Straight from the box, reference TRS01 is ready to replace the original part. You order one part here: the Ducabike Left Front Wheel Cap, reference TRS01. Lay a soft cloth over painted areas nearby before you start the swap. Handle the anodised surface of TRS01 gently, as metal tools can leave scratches.\u003c\/p\u003e\u003ch2\u003ePick Your Shade\u003c\/h2\u003e\u003cp\u003eA matching colour on brake levers, caps or covers makes TRS01 look like part of a planned set.\u003c\/p\u003e\u003ch2\u003eFrom Solid Block to Finished Part\u003c\/h2\u003e\u003cp\u003eBillet aluminium is dense and uniform, which makes it well suited to precise machining. Solid aluminium gives the left front wheel cap a reassuring, robust feel when you pick it up. On closer inspection you notice the finish quality Ducabike gives the left front wheel cap. Ducabike shapes TRS01 so that it sits neatly in its place.\u003c\/p\u003e\u003ch2\u003eLong-Term Care\u003c\/h2\u003e\u003cp\u003eFor anodised parts like TRS01, gentle products protect the colour better than aggressive cleaners. Road salt in winter should be rinsed off promptly, from TRS01 as well as from the whole bike. A wax or protective spray for motorcycles should be tested on a small area before it touches TRS01.\u003c\/p\u003e\u003ch2\u003eApproval Notes\u003c\/h2\u003e\u003cp\u003eThis part is supplied without an ABE and without an expert report. Regulations differ between countries, and only the local authorities can give a binding answer. When you are unsure about TRS01, your nearest vehicle testing station can advise.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Ducabike\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e TRS01\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Billet aluminium, machined from solid\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Coloured anodising\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Red, gold and black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Streetfighter 848 (2012-2015)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ducabike","offers":[{"title":"Anodised Black","offer_id":54107946516746,"sku":"TRS01D","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Red","offer_id":54107946451210,"sku":"TRS01A","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Gold","offer_id":54107946483978,"sku":"TRS01B","price":16.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ducabike-trs01d_1.png?v=1794416568"},{"product_id":"ducabike-left-front-wheel-cap-ducati-streetfighter-v2-955-2022-2024-trs01","title":"Ducabike Left Front Wheel Cap Ducati Streetfighter V2 955 (2022-2024) – TRS01","description":"\u003cp\u003eSpecifically for the Ducati Streetfighter V2 955 (2022-2024), Ducabike mills the Left Front Wheel Cap TRS01 from solid aluminium. Swapping out the original part for billet aluminium makes a difference on the Streetfighter V2 955 you notice at a glance. On a well-kept Ducati Streetfighter V2 955, small details like TRS01 are what set it apart from a standard machine.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSolid-machined aluminium construction\u003c\/li\u003e\n\u003cli\u003eOne part in the box\u003c\/li\u003e\n\u003cli\u003eAvailable anodised in red, gold and black\u003c\/li\u003e\n\u003cli\u003eReplaces the original part, no modifications needed\u003c\/li\u003e\n\u003cli\u003eFitment per Ducabike: Ducati Streetfighter V2 955, 2022-2024\u003c\/li\u003e\n\u003cli\u003eDesigned and made in Italy by Ducabike (DBK Special Parts)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eMaterial Details\u003c\/h2\u003e\u003cp\u003eLight alloy, worked from the solid in Italy, forms the body of TRS01. Light alloy milled from the solid is what Ducabike uses for the Left Front Wheel Cap, reference TRS01. Aluminium that has been machined accurately does not deform in normal use. Machined contours give TRS01 a crisp outline that stands up to close inspection.\u003c\/p\u003e\u003ch2\u003eFitting the Part\u003c\/h2\u003e\u003cp\u003eReference TRS01 comes finished and anodised, ready to take the place of the original part. Take off the original part, clean the area and fit TRS01 there instead. Reference TRS01 is supplied as a single, ready-to-fit piece. Fitting the Ducabike part needs care more than special skill. If you are unsure about fitting TRS01, a specialist workshop can install it for you.\u003c\/p\u003e\u003ch2\u003eModel and Year Check\u003c\/h2\u003e\u003cp\u003eDucabike's application data lists the Ducati Streetfighter V2 955 (2022-2024) as the motorcycle for reference TRS01. Please order TRS01 only if your motorcycle is the Ducati Streetfighter V2 955 built 2022-2024. Does your Streetfighter V2 955 date from outside 2022-2024? Please get in touch before ordering. Inter-Pace keeps separate listings for Ducati DesertX, Ducati Diavel, Ducati Diavel 1260, Ducati Diavel 1260 S, all with Ducabike reference TRS01. Unsure whether TRS01 suits your machine? Contact Inter-Pace before ordering and mention the reference.\u003c\/p\u003e\u003ch2\u003eCare and Everyday Use\u003c\/h2\u003e\u003cp\u003eFor the part, gentle cleaning works better than strong chemicals. Keep a clean cloth in the garage, so drips of brake fluid near TRS01 can be removed at once. Before topping up a reservoir, cover the surrounding parts with a cloth.\u003c\/p\u003e\u003ch2\u003eChoosing the Colour\u003c\/h2\u003e\u003cp\u003eContrast or match: with red, gold and black on offer, TRS01 can stand out or blend in.\u003c\/p\u003e\u003ch2\u003eLegal Notes\u003c\/h2\u003e\u003cp\u003eInter-Pace supplies TRS01 exactly as Ducabike delivers it: without approval documents. On closed circuits other rules apply than on public roads; check both if you use TRS01 on track and road. Whether the change is acceptable on the road depends on the regulations where you live.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Ducabike\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e TRS01\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Billet aluminium, machined from solid\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Coloured anodising\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Red, gold and black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Streetfighter V2 955 (2022-2024)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ducabike","offers":[{"title":"Anodised Black","offer_id":54107946713354,"sku":"TRS01D","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Red","offer_id":54107946647818,"sku":"TRS01A","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Gold","offer_id":54107946680586,"sku":"TRS01B","price":16.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ducabike-trs01d_1.png?v=1794416568"},{"product_id":"ducabike-left-front-wheel-cap-ducati-streetfighter-v4-2020-2026-trs01","title":"Ducabike Left Front Wheel Cap Ducati Streetfighter V4 (2020-2026) – TRS01","description":"\u003cp\u003eYou are looking at the Ducabike Left Front Wheel Cap for the Ducati Streetfighter V4 (2020-2026), sold under part number TRS01. A touch of anodised colour over the left end of the front wheel axle is often all the Streetfighter V4 needs to look more personal. Riders who have already added Ducabike parts will find that TRS01 continues the same machined look on the Streetfighter V4.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBillet aluminium, machined from a solid block\u003c\/li\u003e\n\u003cli\u003eAvailable anodised in red, gold and black\u003c\/li\u003e\n\u003cli\u003eSupplied as a single part\u003c\/li\u003e\n\u003cli\u003eReplaces the original part, no modifications needed\u003c\/li\u003e\n\u003cli\u003eMade to fit the Ducati Streetfighter V4 (2020-2026)\u003c\/li\u003e\n\u003cli\u003eMade in Italy by Ducabike\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat Is in the Box\u003c\/h2\u003e\u003cp\u003eSince the part arrives finished, fitting is limited to removing the old part and installing the new one. Fitting TRS01 over the left end of the front wheel axle is a matter of exchanging parts, not modifying the motorcycle. Ducabike supplies TRS01 individually, as one part. Work carefully around painted surfaces and protect them with a cloth while fitting the part. Fitting TRS01 is straightforward for anyone used to basic work.\u003c\/p\u003e\u003ch2\u003eCleaning Tips\u003c\/h2\u003e\u003cp\u003eClean the anodised aluminium of TRS01 with mild soapy water and a soft cloth. Check TRS01 during routine maintenance, just as you would any other part on the bike. With occasional cleaning, the anodised colour of TRS01 lasts through many riding seasons.\u003c\/p\u003e\u003ch2\u003eMaterial Details\u003c\/h2\u003e\u003cp\u003eMachined rather than moulded: reference TRS01 is solid aluminium from the core to the surface. Solid aluminium gives the left front wheel cap a reassuring, robust feel when you pick it up. Because it takes over from the original part at the same point, the Ducabike part blends with the surrounding layout. Reference TRS01 is shaped to follow the original design lines, so it does not look like an add-on.\u003c\/p\u003e\u003ch2\u003eAnodised Colour Choice\u003c\/h2\u003e\u003cp\u003eChoose the anodised colour that suits your motorcycle; for TRS01 Ducabike offers red, gold and black.\u003c\/p\u003e\u003ch2\u003eWhich Bikes It Fits\u003c\/h2\u003e\u003cp\u003eAccording to Ducabike, reference TRS01 is compatible with the Ducati Streetfighter V4 built 2020-2026. Before ordering, compare the model designation in your papers with Ducati Streetfighter V4. A different production year of the Ducati Streetfighter V4 can mean a different part, even if the bikes look alike. With Ducati DesertX, Ducati Diavel, Ducati Diavel 1260, Ducati Diavel 1260 S, the part number stays TRS01; only the product page changes. For bikes built 2020-2026, Inter-Pace can double-check the Ducabike entry for TRS01 on request.\u003c\/p\u003e\u003ch2\u003eApproval Notes\u003c\/h2\u003e\u003cp\u003eNo German ABE and no expert report: that is the status of TRS01 as supplied by Ducabike. Responsibility for road use with TRS01 lies with the rider, so take a moment to check local law. Since TRS01 replaces the original part, check what your national rules say before using the machine on public roads.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Ducabike\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e TRS01\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Billet aluminium, machined from solid\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Coloured anodising\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Red, gold and black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Streetfighter V4 (2020-2026)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ducabike","offers":[{"title":"Anodised Black","offer_id":54107947335946,"sku":"TRS01D","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Red","offer_id":54107947270410,"sku":"TRS01A","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Gold","offer_id":54107947303178,"sku":"TRS01B","price":16.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ducabike-trs01d_1.png?v=1794416568"},{"product_id":"ducabike-left-front-wheel-cap-ducati-streetfighter-v4-s-2020-2026-trs01","title":"Ducabike Left Front Wheel Cap Ducati Streetfighter V4 S (2020-2026) – TRS01","description":"\u003cp\u003eReference TRS01 stands for the Ducabike left front wheel cap for the Ducati Streetfighter V4 S, matched by the maker to bikes built 2020-2026. Plain factory finishes give way to anodised aluminium over the left end of the front wheel axle, which the Streetfighter V4 S shows off well. Each time you look at the Streetfighter V4 S, reference TRS01 shows clean machining where the original part used to be.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSolid-machined aluminium construction\u003c\/li\u003e\n\u003cli\u003eColour choice: red, gold and black\u003c\/li\u003e\n\u003cli\u003eSupplied as a single part\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the original part\u003c\/li\u003e\n\u003cli\u003eFitment per Ducabike: Ducati Streetfighter V4 S, 2020-2026\u003c\/li\u003e\n\u003cli\u003eDesigned and made in Italy by Ducabike (DBK Special Parts)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eModel and Year Check\u003c\/h2\u003e\u003cp\u003eOn the Ducabike list, TRS01 appears for the Ducati Streetfighter V4 S with model years 2020-2026. Before ordering, compare the model designation in your papers with Ducati Streetfighter V4 S. Model names can be similar across generations, so make sure your bike really is the Ducati Streetfighter V4 S. Ducabike's list shows TRS01 for Ducati DesertX, Ducati Diavel, Ducati Diavel 1260, Ducati Diavel 1260 S as well, and Inter-Pace lists every one of these bikes on its own page. Ducabike's numbering makes TRS01 easy to trace, whether you ask us or a workshop.\u003c\/p\u003e\u003ch2\u003eCleaning and Upkeep\u003c\/h2\u003e\u003cp\u003eNever use scouring pads or wire brushes on TRS01, because they scratch the anodised surface. Leaning a helmet or keys against TRS01 can leave marks, so give the part some space. Store the bike under cover in winter to keep TRS01 and the rest of the bike in good shape.\u003c\/p\u003e\u003ch2\u003eMounting and Delivery\u003c\/h2\u003e\u003cp\u003eInstallation follows a simple logic: out with the original part, in with TRS01. Fitting TRS01 over the left end of the front wheel axle is a matter of exchanging parts, not modifying the motorcycle. This listing covers one piece, enough to replace the original part. Simple as the job is, patience and attention still pay off when fitting the left front wheel cap. Lay a soft cloth over painted areas nearby before you start the swap.\u003c\/p\u003e\u003ch2\u003eMaterial Details\u003c\/h2\u003e\u003cp\u003eAs a manufacturer of billet parts, Ducabike keeps production of the left front wheel cap in Italy. Ducabike produces the left front wheel cap in Italy, machining every piece from billet aluminium. Machined aluminium is form-stable, so TRS01 keeps its shape and fit over many seasons. Because the part is cut from solid aluminium, it feels sturdy when you handle it during fitting.\u003c\/p\u003e\u003ch2\u003eShade and Finish\u003c\/h2\u003e\u003cp\u003eWhatever paint your machine wears, the anodised finish of TRS01 in red, gold and black can be chosen to suit it.\u003c\/p\u003e\u003ch2\u003eRules for Road Use\u003c\/h2\u003e\u003cp\u003eThis machine part comes without ABE, parts certificate or test report from the manufacturer. Rules for parts that take the place of the original part differ from country to country, so check before riding the bike. Ask your local testing station if you are unsure whether TRS01 is permitted on the road.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Ducabike\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e TRS01\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Billet aluminium, machined from solid\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Coloured anodising\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Red, gold and black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Streetfighter V4 S (2020-2026)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ducabike","offers":[{"title":"Anodised Black","offer_id":54107948450058,"sku":"TRS01D","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Red","offer_id":54107948384522,"sku":"TRS01A","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Gold","offer_id":54107948417290,"sku":"TRS01B","price":16.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ducabike-trs01d_1.png?v=1794416568"},{"product_id":"ducabike-left-front-wheel-cap-ducati-panigale-1199-r-2013-2017-trs01","title":"Ducabike Left Front Wheel Cap Ducati Panigale 1199 R (2013-2017) – TRS01","description":"\u003cp\u003eYour Ducati Panigale 1199 R (2013-2017) can wear the Ducabike Left Front Wheel Cap TRS01, milled from a solid block of aluminium. Owners who care about detail will see the point of TRS01 on the Panigale 1199 R the first time they walk up to it. A touch of anodised colour over the left end of the front wheel axle is often all the Panigale 1199 R needs to look more personal.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBillet aluminium, machined from a solid block\u003c\/li\u003e\n\u003cli\u003eAvailable anodised in red, gold and black\u003c\/li\u003e\n\u003cli\u003eSupplied as a single part\u003c\/li\u003e\n\u003cli\u003eFits in place of the original part\u003c\/li\u003e\n\u003cli\u003eSpecific fitment: Ducati Panigale 1199 R (2013-2017)\u003c\/li\u003e\n\u003cli\u003eMade in Italy by Ducabike\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatible Motorcycle\u003c\/h2\u003e\u003cp\u003eDucabike developed the Left Front Wheel Cap TRS01 with the Ducati Panigale 1199 R (2013-2017) in mind. A different production year of the Ducati Panigale 1199 R can mean a different part, even if the bikes look alike. A quick look at the vehicle papers confirms whether your bike is the Ducati Panigale 1199 R from 2013-2017. Owners of Ducati DesertX, Ducati Diavel, Ducati Diavel 1260, Ducati Diavel 1260 S will find TRS01 on a separate page named after their bike. Questions about fitting TRS01? Send Inter-Pace your model and year, and we will check it.\u003c\/p\u003e\u003ch2\u003eLong-Term Care\u003c\/h2\u003e\u003cp\u003eDry the left front wheel cap with a soft microfibre cloth to avoid water spots on the anodised finish. Fluids such as oil or fuel should not be left on the left front wheel cap; a quick wipe is enough. Cleaning the motorcycle regularly protects not only TRS01 but every finish on the motorcycle.\u003c\/p\u003e\u003ch2\u003eFitting Notes\u003c\/h2\u003e\u003cp\u003eNo drilling, cutting or painting is involved: TRS01 is a straight replacement for the original part. On the bike, the Ducabike part simply goes in where the original part came off, over the left end of the front wheel axle. Reference TRS01 is supplied as a single, ready-to-fit piece. Take your time, as a careful swap protects both the new part and the surrounding components. A qualified motorcycle workshop can carry out the fitting of TRS01 if you prefer.\u003c\/p\u003e\u003ch2\u003ePick Your Shade\u003c\/h2\u003e\u003cp\u003eMany owners match the colour of TRS01 to the frame, wheels or paint accents of their bike.\u003c\/p\u003e\u003ch2\u003eConstruction and Material Quality\u003c\/h2\u003e\u003cp\u003eParts milled from the solid have no seams or joints, because each one starts as one piece of metal. Billet means that Ducabike carves reference TRS01 out of solid aluminium instead of pressing or casting it. Billet parts like TRS01 tend to age well, as solid aluminium does not warp like plastic. Fit and finish of TRS01 are made to suit the factory design lines.\u003c\/p\u003e\u003ch2\u003eApproval Notes\u003c\/h2\u003e\u003cp\u003eNeither an ABE nor any expert test report exists from Ducabike for TRS01. When you are unsure about TRS01, your nearest vehicle testing station can advise. Some countries treat a change from the original part to an aftermarket part as a modification that must be checked.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Ducabike\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e TRS01\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Billet aluminium, machined from solid\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Coloured anodising\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Red, gold and black\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Panigale 1199 R (2013-2017)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ducabike","offers":[{"title":"Anodised Black","offer_id":54107948613898,"sku":"TRS01D","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Red","offer_id":54107948548362,"sku":"TRS01A","price":16.2,"currency_code":"EUR","in_stock":true},{"title":"Anodised Gold","offer_id":54107948581130,"sku":"TRS01B","price":16.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ducabike-trs01d_1.png?v=1794416568"}],"url":"https:\/\/inter-pace.com\/collections\/wheels-accessories.oembed?page=8","provider":"Inter-Pace","version":"1.0","type":"link"}