{"title":"Chassis \u0026 wheel screws","description":null,"products":[{"product_id":"lightech-front-rear-axle-nut-aprilia-rsv4-rsv4-1100-factory-r-rr-rf","title":"LighTech Front \u0026 Rear Axle Nut Aprilia RSV4 \/ RSV4 1100 Factory \/ R \/ RR \/ RF (2009–2026) D001","description":"\u003cp\u003eWhen every gram counts on track, the LighTech axle nut D001 delivers where it matters most. Machined from aerospace-grade Ergal 7075 aluminium and anodised for lasting durability, this front and rear axle nut is engineered specifically for the Aprilia RSV4 platform — giving serious RSV4 racers and trackday riders a genuine performance upgrade over the stock steel item without compromising a single newton-metre of clamping integrity.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAerospace-grade Ergal 7075 aluminium construction — exceptional strength-to-weight ratio trusted in aviation and motorsport alike\u003c\/li\u003e\n\u003cli\u003ePrecision CNC-machined for an exact, rattle-free fit on both front and rear axle positions of the RSV4 and RSV4 1100\u003c\/li\u003e\n\u003cli\u003eHard anodised surface finish resists corrosion, track chemicals and heat cycling while maintaining a clean racing aesthetic\u003c\/li\u003e\n\u003cli\u003eRated to a maximum torque of 140 Nm — fully compatible with manufacturer axle torque specifications\u003c\/li\u003e\n\u003cli\u003eAvailable in five anodised colours to coordinate with your RSV4's livery or team colours\u003c\/li\u003e\n\u003cli\u003eDirect OEM replacement geometry: M25x1.5 thread, 39 mm diameter, 13 mm height, 30 mm hex diameter\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTrack-Proven Engineering\u003c\/h2\u003e\u003cp\u003eLighTech designed the D001 with the demands of circuit racing firmly in mind. The Ergal 7075 alloy used throughout is the same material specified by aerospace engineers for structural components where mass reduction cannot come at the cost of tensile strength. CNC machining to tight tolerances ensures the nut seats perfectly against the fork leg or swingarm — eliminating the micro-movement that can develop with lower-grade aftermarket hardware over repeated track sessions. The hard anodised finish is not merely cosmetic; it forms a protective oxide layer that resists the abrasive grime, chain lubricant overspray and brake dust that accumulate during hard use at the circuit. Whether you are stripping kilos for a sprint race or simply elevating your RSV4's detail quality for trackdays, the D001 provides a measurable and visible upgrade.\u003c\/p\u003e\u003ch2\u003eRoad Use \u0026amp; Everyday Reliability\u003c\/h2\u003e\u003cp\u003eThe D001 is equally at home on the road. The maximum rated torque of 140 Nm means it meets the clamping demands of road riding without reservation, and the corrosion-resistant anodised finish ensures it stays presentable through all-weather commuting and touring. Fitting is straightforward using a standard 30 mm hex socket — no specialist tooling required. The nut is supplied in black (D001NER), gold (D001ORO), red (D001ROS), silver (D001SIL) and cobalt blue (D001COB) so you can match or contrast your RSV4's colour scheme precisely.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAprilia RSV4 Factory (2009–2026)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 R (2009–2026)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 RR (2009–2026)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 RF (2009–2026)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 1100 (2009–2026)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 1100 Factory (2009–2026)\u003c\/li\u003e\n\u003cli\u003eFits both front and rear axle positions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eD001\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread\u003c\/th\u003e\n\u003ctd\u003eM25x1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOuter Diameter\u003c\/th\u003e\n\u003ctd\u003e39 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e13 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHex Diameter\u003c\/th\u003e\n\u003ctd\u003e30 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Torque\u003c\/th\u003e\n\u003ctd\u003e140 Nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eErgal 7075 aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHard anodised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePosition\u003c\/th\u003e\n\u003ctd\u003eFront and rear axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"LighTech","offers":[{"title":"Black","offer_id":53167133917450,"sku":"D001NER","price":22.92,"currency_code":"EUR","in_stock":true},{"title":"Blue","offer_id":53167133950218,"sku":"D001COB","price":22.92,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":53167133982986,"sku":"D001ROS","price":22.92,"currency_code":"EUR","in_stock":true},{"title":"Gold","offer_id":53167134015754,"sku":"D001ORO","price":22.92,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":53167134048522,"sku":"D001SIL","price":22.92,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/D001NER.png?v=1780790987"},{"product_id":"lightech-swingarm-axle-nut-honda-cbr-600-rr-d004","title":"LighTech Swingarm Axle Nut Honda CBR 600 RR (2007–2016) D004","description":"\u003cp\u003eFew components on a track-focused Honda CBR 600 RR reveal a builder's attention to detail quite like the swingarm axle nut. LighTech's D004 replaces the factory steel item with a piece machined from Ergal 7075 aluminium — the same aerospace-grade alloy trusted in Formula racing for its exceptional strength-to-weight ratio — then hard anodised in your choice of five race-inspired colours. The result is a nut that earns its place on both the circuit and the road, carrying the aesthetics and engineering heritage you'd expect from one of Italy's most respected chassis accessory specialists.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eErgal 7075 aluminium construction — aerospace-grade alloy delivering extreme rigidity at a fraction of the weight of steel\u003c\/li\u003e\n\u003cli\u003eCNC precision machined for an exact, rattle-free fit on Honda CBR 600 RR swingarms\u003c\/li\u003e\n\u003cli\u003eHard anodised finish for lasting corrosion resistance and the signature LighTech racing look\u003c\/li\u003e\n\u003cli\u003eAvailable in five anodised colours — black (D004NER), gold (D004ORO), red (D004ROS), silver (D004SIL) and cobalt (D004COB) — so the nut can be matched to your livery\u003c\/li\u003e\n\u003cli\u003eThread M18x1.5, outer diameter 29 mm, hex 22 mm, height 14 mm — maximum tightening torque 120 Nm\u003c\/li\u003e\n\u003cli\u003eEqually suited to trackday use and daily road riding\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign, Finish and Heritage\u003c\/h2\u003e\u003cp\u003eLighTech has built its reputation over decades supplying CNC-machined aluminium accessories to racing teams and serious road riders across Europe. Every D004 swingarm axle nut is turned and milled in-house to tolerances that ensure the nut sits flush and true, eliminating the micro-movement that can develop with mass-produced steel hardware over time. The hard anodising process penetrates the surface of the Ergal rather than sitting on top of it, so the colour holds through seasons of use without flaking or fading — whether the bike lives in a heated garage or endures a full racing calendar.\u003c\/p\u003e\u003ch2\u003ePerformance and Practicality\u003c\/h2\u003e\u003cp\u003eReplacing a steel axle nut with an Ergal 7075 item removes meaningful unsprung mass from the rear of the chassis — small in isolation, but consistent with a broader philosophy of saving weight wherever it can be found. The M18x1.5 thread and 22 mm hex size mean a standard swingarm tool still works; nothing proprietary is required for routine maintenance. The 120 Nm maximum tightening torque is fully consistent with Honda's own specification for this chassis, so there is no compromise in structural integrity.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eHonda CBR 600 RR, model years 2007 to 2016\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eLighTech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eD004\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eErgal 7075 aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread\u003c\/td\u003e\n\u003ctd\u003eM18x1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter diameter\u003c\/td\u003e\n\u003ctd\u003e29 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e14 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHex diameter\u003c\/td\u003e\n\u003ctd\u003e22 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum tightening torque\u003c\/td\u003e\n\u003ctd\u003e120 Nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eHard anodised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eHonda CBR 600 RR (2007–2016)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"LighTech","offers":[{"title":"Black","offer_id":53167135523082,"sku":"D004NER","price":23.67,"currency_code":"EUR","in_stock":true},{"title":"Blue","offer_id":53167135555850,"sku":"D004COB","price":23.67,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":53167135588618,"sku":"D004ROS","price":23.67,"currency_code":"EUR","in_stock":true},{"title":"Gold","offer_id":53167135621386,"sku":"D004ORO","price":23.67,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":53167135654154,"sku":"D004SIL","price":23.67,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/D004NER.png?v=1780791061"},{"product_id":"lightech-swingarm-axle-nut-bmw-s1000rr-k46-k67","title":"LighTech Swingarm Axle Nut BMW S1000RR K46 K67 (2009–2026) – Ergal 7075 Aluminium D004","description":"\u003cp\u003eWhen every gram and every detail counts, the LighTech swingarm axle nut for the BMW S1000RR K46 and K67 is the upgrade that quietly earns its place on both road and track. Machined from aerospace-grade Ergal 7075 aluminium and available in five anodised finishes, it delivers a factory-precise fit that inspires confidence mile after mile — and looks exceptional doing it.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eErgal 7075 aluminium construction — the same alloy trusted in aerospace for an outstanding strength-to-weight ratio\u003c\/li\u003e\n\u003cli\u003eCNC-precision machined to exact tolerances, ensuring a flush, rattle-free fit that stays secure under hard acceleration and braking\u003c\/li\u003e\n\u003cli\u003eHard anodised surface finish provides reliable corrosion resistance and a durable, race-ready appearance\u003c\/li\u003e\n\u003cli\u003eRated to a maximum tightening torque of 120 Nm, meeting the demands of sustained track use\u003c\/li\u003e\n\u003cli\u003eAvailable in black, blue, red, gold and silver to coordinate with your S1000RR's livery\u003c\/li\u003e\n\u003cli\u003eDirect replacement for both K46 (2009–2018) and K67 (2019–2026) chassis generations\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePrecision Engineering for the Long Haul\u003c\/h2\u003e\u003cp\u003eLighTech has built its reputation by applying motorsport manufacturing standards to every component it produces, and the D004 swingarm axle nut is no exception. The M18x1.5 thread is cut to micron-level precision so the nut seats evenly and torques down cleanly without any tendency to gall or seize — a detail that makes routine swingarm removal and reinstallation a far more pleasant experience across the lifetime of the bike. The 29 mm diameter and 14 mm height profile are dimensionally identical to the OEM specification, so there is no fettling, no shimming and no guesswork involved at installation.\u003c\/p\u003e\u003ch2\u003eRoad and Track Performance\u003c\/h2\u003e\u003cp\u003eThe appeal of the D004 goes beyond aesthetics. By replacing a steel factory nut with an Ergal 7075 unit, you strip a meaningful amount of unsprung rotational mass from the rear end — a change that subtly sharpens the S1000RR's already razor-edged handling response. The anodised finish is robust enough to survive the repeated heat cycles, road grime and chain lubricant exposure that any working sportsbike encounters, making this a lasting upgrade rather than a cosmetic one that needs babying.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBMW S1000RR K46 (2009–2018)\u003c\/li\u003e\n\u003cli\u003eBMW S1000RR K67 (2019–2026)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eD004\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eErgal 7075 aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread\u003c\/td\u003e\n\u003ctd\u003eM18x1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e29 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e14 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHex diameter\u003c\/td\u003e\n\u003ctd\u003e22 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum tightening torque\u003c\/td\u003e\n\u003ctd\u003e120 Nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurface finish\u003c\/td\u003e\n\u003ctd\u003eHard anodised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eBMW S1000RR K46 (2009–2018), K67 (2019–2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"LighTech","offers":[{"title":"Black","offer_id":53167135686922,"sku":"D004NER","price":23.67,"currency_code":"EUR","in_stock":true},{"title":"Blue","offer_id":53167135719690,"sku":"D004COB","price":23.67,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":53167135752458,"sku":"D004ROS","price":23.67,"currency_code":"EUR","in_stock":true},{"title":"Gold","offer_id":53167135785226,"sku":"D004ORO","price":23.67,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":53167135817994,"sku":"D004SIL","price":23.67,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/D004NER_13e89512-6aef-43bc-bd52-bb614d1e9a4d.png?v=1780791062"},{"product_id":"lightech-rear-axle-nut-bmw-s1000rr-k46-k67-d003","title":"LighTech Rear Axle Nut BMW S1000RR K46, K67 (2009-2026) D003","description":"\u003cp\u003eA direct-fit upgrade that works just as hard on your daily commute as it does on the track, the LighTech rear axle nut for the BMW S1000RR K46 and K67 (2009–2026) brings aerospace-grade Ergal 7075 aluminium engineering to one of the most overlooked fasteners on the bike. Precision CNC-machined, anodised for lasting corrosion resistance, and available in five colours to suit any S1000RR build.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eErgal 7075 aluminium construction — the same alloy used in aerospace applications, delivering exceptional strength at minimal weight\u003c\/li\u003e\n\u003cli\u003eCNC-machined to exacting tolerances for a perfect, rattle-free fit on all BMW S1000RR K46 and K67 chassis\u003c\/li\u003e\n\u003cli\u003eHard anodised finish provides reliable corrosion protection and a clean racing aesthetic that holds up to road grime and track use alike\u003c\/li\u003e\n\u003cli\u003eThread specification M24x1.5 with a maximum torque rating of 140 Nm — fully compatible with factory tooling and standard workshop practice\u003c\/li\u003e\n\u003cli\u003eAvailable in black, blue, red, gold and silver to complement your bike's colour scheme without compromise\u003c\/li\u003e\n\u003cli\u003eGenuine drop-in replacement requiring no modification — ideal for riders who want quality hardware without extra effort\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Everyday Value\u003c\/h2\u003e\u003cp\u003eLighTech has built its reputation on producing components that meet the demands of professional racing while remaining entirely practical for road riders. The D003 rear axle nut is a prime example: the Ergal 7075 alloy is stiffer and lighter than standard aluminium alloys, yet the nut is engineered to sit comfortably within a 140 Nm torque rating that any competent mechanic can work with. The anodised surface treatment is not merely cosmetic — it actively resists the moisture and road salt that accelerate corrosion on conventional steel nuts, keeping the nut looking sharp and releasing cleanly at every wheel removal.\u003c\/p\u003e\u003ch2\u003ePerformance and Finish Options\u003c\/h2\u003e\u003cp\u003eFive anodised colour variants — black (D003NER), cobalt blue (D003COB), red (D003ROS), gold (D003ORO) and silver (D003SIL) — allow you to coordinate with your brake levers, footpeg hardware or other LighTech accessories. The hex drive measures 30 mm across flats, keeping compatibility with widely available sockets, while the 39 mm outer diameter and 17.5 mm height mirror the OEM envelope so there are no clearance surprises. Whether you are prepping the S1000RR for a track day or simply refreshing worn fasteners for another season of road riding, this nut delivers a visibly better result than a standard replacement at a price point that makes the upgrade straightforward to justify.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBMW S1000RR K46 (2009–2018)\u003c\/li\u003e\n\u003cli\u003eBMW S1000RR K67 (2019–2026)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eD003\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eErgal 7075 aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread\u003c\/td\u003e\n\u003ctd\u003eM24x1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter diameter\u003c\/td\u003e\n\u003ctd\u003e39 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e17.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHex drive diameter\u003c\/td\u003e\n\u003ctd\u003e30 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum torque\u003c\/td\u003e\n\u003ctd\u003e140 Nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurface treatment\u003c\/td\u003e\n\u003ctd\u003eHard anodised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eBMW S1000RR K46 (2009–2018), K67 (2019–2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"LighTech","offers":[{"title":"Black","offer_id":53167135850762,"sku":"D003NER","price":25.49,"currency_code":"EUR","in_stock":true},{"title":"Blue","offer_id":53167135883530,"sku":"D003COB","price":25.49,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":53167135916298,"sku":"D003ROS","price":25.49,"currency_code":"EUR","in_stock":true},{"title":"Gold","offer_id":53167135949066,"sku":"D003ORO","price":25.49,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":53167135981834,"sku":"D003SIL","price":25.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/D003NER.png?v=1780791062"},{"product_id":"lightech-steering-head-nut-bmw-s1000rr-k46-k67","title":"LighTech Steering Head Nut for BMW S1000RR K46, K67 (2009–2026) – D014","description":"\u003cp\u003eEngineered for riders who demand a precise, rattle-free fit every time they hit the road or track, the LighTech D014 steering head nut slots straight onto the BMW S1000RR K46 and K67 with zero compromise. Machined from Ergal 7075 aluminium — the same ultra-light, high-tensile alloy used in motorsport-grade components — it sheds unnecessary weight without sacrificing the structural integrity your S1000RR's steering geometry depends on.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eErgal 7075 aluminium construction: exceptional strength-to-weight ratio for both road and track use\u003c\/li\u003e\n\u003cli\u003eCNC-machined to exacting tolerances for a perfect, confidence-inspiring fit on the S1000RR steering head\u003c\/li\u003e\n\u003cli\u003eHard anodised finish resists corrosion, scratching and the heat cycles of intensive riding\u003c\/li\u003e\n\u003cli\u003eM28x1 thread, 42.3 mm diameter and 19.7 mm height engineered to OEM dimensions — no modifications required\u003c\/li\u003e\n\u003cli\u003eMaximum tightening torque of 520 Nm ensures the steering head stays locked and stable under hard braking and high-speed direction changes\u003c\/li\u003e\n\u003cli\u003eAvailable in five anodised colours to complement your S1000RR's livery — each colour carries its own part number suffix for precise ordering\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePrecision at the Steering Head\u003c\/h2\u003e\u003cp\u003eThe steering head nut is a small component with an outsized influence on how a motorcycle feels through corners. A correctly torqued, perfectly fitting nut keeps play out of the steering head bearings, preserves the chassis geometry BMW's engineers dialled in, and eliminates the subtle vibration that can creep in with worn or poorly fitting hardware. LighTech's CNC process holds the thread and seating surfaces to tolerances that guarantee consistent clamp load every time the nut is installed, so you can set it and forget it for the long term.\u003c\/p\u003e\u003ch2\u003eTrack-Day Ready, Road-Legal Refinement\u003c\/h2\u003e\u003cp\u003eThe D014 is equally at home on a weekend trackday machine or a daily-ridden S1000RR. The anodised surface adds a purposeful, race-department aesthetic without the weight penalty of steel OEM hardware, and the 34 mm hex across flats means it seats cleanly with a standard spanner or torque wrench. The corrosion-resistant finish holds up to weather, chain lube overspray and the general punishment of real-world riding, keeping its finish season after season.\u003c\/p\u003e\u003ch2\u003eColour Options\u003c\/h2\u003e\u003cp\u003eSelect from five anodised finishes, each with a dedicated part number:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBlack — D014NER\u003c\/li\u003e\n\u003cli\u003eGold — D014ORO\u003c\/li\u003e\n\u003cli\u003eRed — D014ROS\u003c\/li\u003e\n\u003cli\u003eSilver — D014SIL\u003c\/li\u003e\n\u003cli\u003eCobalt — D014COB\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBMW S1000RR K46 (2009–2018)\u003c\/li\u003e\n\u003cli\u003eBMW S1000RR K67 (2019–2026)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eD014\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread\u003c\/td\u003e\n\u003ctd\u003eM28x1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e42.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e19.7 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHex Across Flats\u003c\/td\u003e\n\u003ctd\u003e34 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Torque\u003c\/td\u003e\n\u003ctd\u003e520 Nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eErgal 7075 aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurface Finish\u003c\/td\u003e\n\u003ctd\u003ehard anodised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"LighTech","offers":[{"title":"Black","offer_id":53167136014602,"sku":"D014NER","price":24.85,"currency_code":"EUR","in_stock":true},{"title":"Blue","offer_id":53167136047370,"sku":"D014COB","price":24.85,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":53167136080138,"sku":"D014ROS","price":24.85,"currency_code":"EUR","in_stock":true},{"title":"Gold","offer_id":53167136112906,"sku":"D014ORO","price":24.85,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":53167136145674,"sku":"D014SIL","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/D014NER.png?v=1780791062"},{"product_id":"lightech-rear-axle-nut-honda-cbr-600-rr-d018","title":"LighTech Rear Axle Nut Honda CBR 600 RR (2007-2016) D018 – Ergal 7075 Aluminium","description":"\u003cp\u003eWhen lap times matter and every gram counts, the LighTech rear axle nut for the Honda CBR 600 RR (2007–2016) is the upgrade that belongs on your race-prepared machine. Machined from aerospace-grade Ergal 7075 aluminium, this CNC-precision nut delivers exceptional clamping strength at a fraction of the weight of a standard steel item — a genuine track-performance component that wears its racing credentials openly.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eErgal 7075 aluminium construction — aerospace-specification alloy combining ultra-low weight with extreme structural strength, ideal for track and road use alike\u003c\/li\u003e\n\u003cli\u003eCNC-machined to exact tolerances for a perfect, rattle-free fit on the Honda CBR 600 RR axle every time\u003c\/li\u003e\n\u003cli\u003eAnodised finish for lasting corrosion resistance and a sharp, pit-lane-ready aesthetic\u003c\/li\u003e\n\u003cli\u003eThread specification M22x1.5 with a maximum torque rating of 130 Nm — engineered to stay secure under race conditions\u003c\/li\u003e\n\u003cli\u003eAvailable in five anodised colours — black (D018NER), blue (D018COB), red (D018ROS), gold (D018ORO), and silver (D018SIL) — so you can match your livery precisely\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEngineered for the Track\u003c\/h2\u003e\u003cp\u003eLighTech designs components for riders who refuse to compromise. The Ergal 7075 alloy used here is the same material found in high-performance aerospace and motorsport structures — chosen specifically because its strength-to-weight ratio outperforms standard 6061 aluminium by a significant margin. On the CBR 600 RR, which responds keenly to any reduction in unsprung and rotating mass, switching to a LighTech axle nut is one of those small, purposeful changes that collectively define a properly sorted track weapon.\u003c\/p\u003e\u003cp\u003eThe hexagonal drive profile measures 32 mm across flats, the outer diameter is 38.4 mm, and the overall height is 19.5 mm — dimensions chosen to integrate cleanly with the CBR 600 RR's rear wheel assembly without modification. At 130 Nm maximum tightening torque, the nut meets the demands of aggressive track sessions without risk of movement or fatigue.\u003c\/p\u003e\u003ch2\u003ePrecision That Shows\u003c\/h2\u003e\u003cp\u003eEvery LighTech D018 nut is produced on CNC machining centres, meaning each unit is held to the same exacting tolerances as the last. The anodised surface treatment is not merely cosmetic: it creates a hard, uniform oxide layer that resists corrosion, minor abrasion, and the thermal cycling inevitable on a race circuit. Whether your CBR 600 RR sees weekend track days or full-season club racing, this nut is built to last the distance.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eHonda CBR 600 RR — model years 2007 to 2016\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eLighTech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eD018\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eErgal 7075 aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread\u003c\/td\u003e\n\u003ctd\u003eM22x1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter diameter\u003c\/td\u003e\n\u003ctd\u003e38.4 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e19.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHex drive diameter\u003c\/td\u003e\n\u003ctd\u003e32 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum torque\u003c\/td\u003e\n\u003ctd\u003e130 Nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurface finish\u003c\/td\u003e\n\u003ctd\u003eAnodised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eHonda CBR 600 RR (2007–2016)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"LighTech","offers":[{"title":"Black","offer_id":53167136178442,"sku":"D018NER","price":25.49,"currency_code":"EUR","in_stock":true},{"title":"Blue","offer_id":53167136211210,"sku":"D018COB","price":25.49,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":53167136243978,"sku":"D018ROS","price":25.49,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":53167136309514,"sku":"D018SIL","price":25.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/D018NER.png?v=1780791063"},{"product_id":"lightech-swingarm-axle-nut-aprilia-rsv4-rsv4-1100-factory-r-rr-rf-d010","title":"LighTech Swingarm Axle Nut Aprilia RSV4 \/ RSV4 1100 Factory \/ R \/ RR \/ RF (2009–2026) D010","description":"\u003cp\u003eWhen the integrity of your swingarm axle fastening matters most, the LighTech D010 swingarm axle nut delivers precision-machined security engineered to aerospace standards. Crafted from Ergal 7075 aluminium — the same alloy trusted in aviation structures — and finished with an anodised surface that resists corrosion, this nut is CNC-machined to exact tolerances for a fitment that is both mechanically sound and visually striking on any Aprilia RSV4 variant from 2009 to 2026.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eErgal 7075 aluminium construction: exceptional strength-to-weight ratio derived from aerospace-grade alloy, replacing heavier OEM hardware without compromising structural integrity\u003c\/li\u003e\n\u003cli\u003eCNC-machined to precise tolerances, ensuring consistent thread engagement and a secure, rattle-free fit on the swingarm axle\u003c\/li\u003e\n\u003cli\u003eHard anodised surface treatment provides lasting corrosion resistance and preserves the racing aesthetic over years of road and track use\u003c\/li\u003e\n\u003cli\u003eM20x1.5 thread with a 125 Nm maximum tightening torque rating — confidence-inspiring figures that confirm this nut is engineered for serious use\u003c\/li\u003e\n\u003cli\u003eAvailable in five anodised colours to complement your RSV4's livery, each identified by its own part-number suffix for straightforward ordering\u003c\/li\u003e\n\u003cli\u003eApproved for both road and circuit use, making it a genuinely versatile upgrade wherever you ride\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEngineering \u0026amp; Construction\u003c\/h2\u003e\u003cp\u003eLighTech manufactures the D010 from Ergal 7075, a high-strength aluminium alloy that combines low mass with the structural rigidity demanded by competition environments. The CNC machining process eliminates the dimensional inconsistencies found in cast alternatives, producing a nut with a 34.8 mm outer diameter, 15 mm height and a 27 mm hex that accepts a standard tool without risk of rounding. The M20x1.5 fine-pitch thread ensures smooth engagement and resists loosening under vibration, while the specified 125 Nm maximum torque rating provides a clear, safe tightening reference for workshop and trackside installation alike.\u003c\/p\u003e\u003ch2\u003eFinish \u0026amp; Colour Options\u003c\/h2\u003e\u003cp\u003eEach D010 nut is individually anodised, sealing the alloy surface against oxidation and giving each colour a depth that painted finishes cannot match. The following colour variants are available, each with its own part number for accurate identification:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBlack — D010NER\u003c\/li\u003e\n\u003cli\u003eBlue — D010COB\u003c\/li\u003e\n\u003cli\u003eRed — D010ROS\u003c\/li\u003e\n\u003cli\u003eGold — D010ORO\u003c\/li\u003e\n\u003cli\u003eSilver — D010SIL\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis swingarm axle nut is a direct, application-specific replacement designed exclusively for the following Aprilia models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAprilia RSV4 Factory — 2009 to 2026\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 R — 2009 to 2026\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 RR — 2009 to 2026\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 RF — 2009 to 2026\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 1100 — 2009 to 2026\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart number: D010\u003c\/li\u003e\n\u003cli\u003eMaterial: Ergal 7075 aluminium\u003c\/li\u003e\n\u003cli\u003eThread: M20x1.5\u003c\/li\u003e\n\u003cli\u003eOuter diameter: 34.8 mm\u003c\/li\u003e\n\u003cli\u003eHeight: 15 mm\u003c\/li\u003e\n\u003cli\u003eHex diameter: 27 mm\u003c\/li\u003e\n\u003cli\u003eMaximum tightening torque: 125 Nm\u003c\/li\u003e\n\u003cli\u003eSurface finish: anodised\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"Black","offer_id":53167136342282,"sku":"D010NER","price":22.92,"currency_code":"EUR","in_stock":true},{"title":"Blue","offer_id":53167136375050,"sku":"D010COB","price":22.92,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":53167136407818,"sku":"D010ROS","price":22.92,"currency_code":"EUR","in_stock":true},{"title":"Gold","offer_id":53167136440586,"sku":"D010ORO","price":22.92,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":53167136473354,"sku":"D010SIL","price":22.92,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/D010NER.png?v=1780791063"},{"product_id":"lightech-rear-axle-nut-honda-cbr-1000-rr-d018","title":"LighTech Rear Axle Nut Honda CBR 1000 RR (2008-2016) D018 – Ergal 7075 Aluminium","description":"\u003cp\u003eEngineered for riders who refuse to compromise, the LighTech rear axle nut for the Honda CBR 1000 RR (2008–2016) delivers an effortless, secure fit every time you wheel the bike out — whether that is a Sunday morning road ride or a full trackday session. Machined from aerospace-grade Ergal 7075 aluminium and finished with a hard anodised surface, it slots into place with a precision that makes installation feel as considered as the engineering behind it.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eErgal 7075 aluminium construction — aircraft-grade alloy chosen for its outstanding strength-to-weight ratio, dramatically lighter than the OEM steel equivalent without sacrificing structural integrity\u003c\/li\u003e\n\u003cli\u003eCNC-machined to exacting tolerances, guaranteeing a perfect thread engagement on every fitting and eliminating the risk of cross-threading or uneven seating\u003c\/li\u003e\n\u003cli\u003eHard anodised surface treatment resists corrosion, chips and track grime while adding a sharp racing aesthetic that complements any colour scheme\u003c\/li\u003e\n\u003cli\u003eM22x1.5 thread spec and 32 mm hex diameter match OEM tooling, so no specialist equipment is needed at the paddock\u003c\/li\u003e\n\u003cli\u003eMaximum rated torque of 130 Nm ensures the nut stays exactly where you put it, lap after lap\u003c\/li\u003e\n\u003cli\u003eAvailable in five anodised colours to coordinate with your CBR 1000 RR's livery — each colour assigned its own part number for straightforward reordering\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEngineering Detail\u003c\/h2\u003e\u003cp\u003eLighTech designed this axle nut as a direct OEM replacement that happens to outperform the original in almost every measurable respect. The Ergal 7075 billet starts life oversized, then passes through multi-axis CNC machining that brings the thread, the hex flats and the bearing face into tolerances measured in hundredths of a millimetre. The result is a component that threads on smoothly, torques down evenly across the full 130 Nm specification and stays put under the lateral and braking loads that a litre-class Honda generates at speed. The anodised finish is not cosmetic afterthought — it forms an integral oxide layer that hardens the aluminium surface and seals it against moisture ingress, keeping the nut looking and functioning as new through multiple season changes.\u003c\/p\u003e\u003ch2\u003eRoad and Track Use\u003c\/h2\u003e\u003cp\u003eFor road riders, the primary benefit is a component that fits correctly, requires no persuasion and resists the corrosion that eventually seizes standard steel hardware. For trackday and club racing use, the weight saving over the stock nut is an easy, no-compromise gain that requires no jetting changes, no geometry adjustment and no compromise to reliability — just remove the old, torque on the new, and concentrate on your lap times. The 38.4 mm outer diameter and 19.5 mm height are dimensionally identical to OEM, so wheel changes in the paddock proceed without any adapters or modified stands.\u003c\/p\u003e\u003ch2\u003eColour Options\u003c\/h2\u003e\u003cp\u003eEach colour variant carries its own part number, making it simple to order replacements or to match a complete LighTech fastener set. The available finishes are: black (D018NER), gold (D018ORO), red (D018ROS), silver (D018SIL), and cobalt blue (D018COB).\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eHonda CBR 1000 RR — all variants, model years 2008 to 2016\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eD018\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eErgal 7075 aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurface finish\u003c\/td\u003e\n\u003ctd\u003eHard anodised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread\u003c\/td\u003e\n\u003ctd\u003eM22x1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter diameter\u003c\/td\u003e\n\u003ctd\u003e38.4 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e19.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHex diameter\u003c\/td\u003e\n\u003ctd\u003e32 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum torque\u003c\/td\u003e\n\u003ctd\u003e130 Nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"LighTech","offers":[{"title":"Black","offer_id":53167136735498,"sku":"D018NER","price":25.49,"currency_code":"EUR","in_stock":true},{"title":"Blue","offer_id":53167136768266,"sku":"D018COB","price":25.49,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":53167136801034,"sku":"D018ROS","price":25.49,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":53167136866570,"sku":"D018SIL","price":25.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/D018NER_e1752220-ce52-4448-9ca0-9552af48dbdb.png?v=1780791067"},{"product_id":"lightech-swingarm-axle-nut-honda-cbr-1000-rr-d018","title":"LighTech Swingarm Axle Nut Honda CBR 1000 RR (2008–2016) D018","description":"\u003cp\u003eWhen every gram and every tenth of a second counts on track, the LighTech swingarm axle nut for the Honda CBR 1000 RR (2008–2016) delivers exactly the kind of precision engineering that separates race-prepared machinery from the rest. Machined from Ergal 7075 aluminium — the aerospace-grade alloy favoured in motorsport for its exceptional strength-to-weight ratio — this is a direct, no-compromise upgrade for riders who demand race-spec componentry on every corner of their CBR.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eErgal 7075 aluminium construction: aerospace-grade alloy offering maximum structural integrity at minimum weight\u003c\/li\u003e\n\u003cli\u003eCNC-machined to tight tolerances for a precise, rattle-free fit and consistent clamping force\u003c\/li\u003e\n\u003cli\u003eHard anodised finish resists corrosion, track grime and abrasion while delivering an unmistakably purposeful look\u003c\/li\u003e\n\u003cli\u003eRated to a maximum tightening torque of 130 Nm — engineered for the demands of sustained track use\u003c\/li\u003e\n\u003cli\u003eAvailable in five anodised colours with individual part numbers, making identification and team colour-coding straightforward\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eRace Engineering in a Single Component\u003c\/h2\u003e\u003cp\u003eLighTech has built its reputation by applying the material science and manufacturing discipline of professional racing to parts that are often overlooked. The swingarm axle nut is a case in point: the standard steel item carries unnecessary mass and offers no adjustment in appearance. The D018 replaces it with a component that has been CNC-turned from a solid billet of Ergal 7075, the same aluminium alloy series used in aircraft structures and Formula 1 suspension components. The result is a part that is dramatically lighter than its steel counterpart without any reduction in the torque rating that matters at circuit speeds.\u003c\/p\u003e\u003cp\u003eThe thread specification — M22x1.5 — matches the Honda OEM fitment exactly, and the 32 mm hex diameter is sized for standard race toolkit spanners. The 130 Nm maximum tightening torque gives a clear, safe working limit for pit-lane tyre changes and wheel rebuilds. On track days and race weekends, small savings add up; fitting the D018 across your suspension hardware is the disciplined approach to shedding rotational and unsprung mass without touching the geometry your suspension setup depends on.\u003c\/p\u003e\u003ch2\u003eRoad-Legal Refinement, Race-Ready Attitude\u003c\/h2\u003e\u003cp\u003eThe D018 is equally at home on a road-going CBR 1000 RR used for weekend blasts. The hard anodised surface is durable enough to withstand road contamination, brake dust and the heat cycles that build around a rear axle over thousands of kilometres. Choose a colour that matches your bike's livery — black for stealth, gold for a classic race look, red to accent Honda's factory palette, silver for a clean OEM-plus finish, or cobalt blue for a standout contrast.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eHonda CBR 1000 RR (2008–2016)\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eLighTech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eD018\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eErgal 7075 aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturing process\u003c\/td\u003e\n\u003ctd\u003eCNC-machined\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurface finish\u003c\/td\u003e\n\u003ctd\u003eHard anodised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread\u003c\/td\u003e\n\u003ctd\u003eM22x1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter diameter\u003c\/td\u003e\n\u003ctd\u003e38.4 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e19.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHex diameter\u003c\/td\u003e\n\u003ctd\u003e32 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum tightening torque\u003c\/td\u003e\n\u003ctd\u003e130 Nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eHonda CBR 1000 RR (2008–2016)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"LighTech","offers":[{"title":"Black","offer_id":53167136899338,"sku":"D018NER","price":25.49,"currency_code":"EUR","in_stock":true},{"title":"Blue","offer_id":53167136932106,"sku":"D018COB","price":25.49,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":53167136964874,"sku":"D018ROS","price":25.49,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":53167137030410,"sku":"D018SIL","price":25.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/D018NER_e1d74be1-c023-4572-8984-e64ea443cb72.png?v=1780791069"},{"product_id":"lightech-rear-wheel-nut-yamaha-yzf-r6-rj11-rj15-rj27-d003","title":"LighTech Rear Wheel Nut Yamaha YZF-R6 RJ11, RJ15, RJ27 (2006-2026) D003","description":"\u003cp\u003eWhen every gram and every second counts on track, the LighTech rear wheel nut for the Yamaha YZF-R6 delivers the kind of precision engineering that racing demands. Machined from aerospace-grade Ergal 7075 aluminium and finished with an anodised surface, this is a performance component that earns its place on both the circuit and the road.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eErgal 7075 aluminium construction — aerospace-derived alloy offering an exceptional strength-to-weight ratio for serious weight savings without compromise\u003c\/li\u003e\n\u003cli\u003eCNC-machined to exacting tolerances for a perfect, rattle-free fit on the YZF-R6 rear axle\u003c\/li\u003e\n\u003cli\u003eAnodised finish provides robust corrosion resistance and a sharp racing aesthetic in five colour options\u003c\/li\u003e\n\u003cli\u003eRated to a maximum tightening torque of 140 Nm, meeting the demands of track day and competition use\u003c\/li\u003e\n\u003cli\u003eCovers the full YZF-R6 model run from 2006 through to 2026 across all three frame generations\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTrack-Focused Engineering\u003c\/h2\u003e\u003cp\u003eLighTech designed this rear wheel nut with the circuit firmly in mind. The Ergal 7075 alloy used here is the same material trusted by aerospace and motorsport engineers for components where low mass and high structural integrity are non-negotiable. At just 39 mm in diameter and 17.5 mm in height, the nut sits flush and clean within the swingarm architecture of the R6, eliminating unnecessary bulk that standard steel hardware introduces. The M24x1.5 thread pitch and 30 mm hex diameter ensure compatibility with standard paddock tooling, so pit stops and wheel changes remain quick and uncomplicated.\u003c\/p\u003e\u003ch2\u003eFinish and Colour Options\u003c\/h2\u003e\u003cp\u003eThe hard anodised surface treatment does more than protect against corrosion — it gives the nut a clean, purposeful appearance that complements aftermarket wheels and brake hardware. Five colour options allow the nut to be matched precisely to your R6's livery or colour scheme:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBlack (D003NER)\u003c\/li\u003e\n\u003cli\u003eGold (D003ORO)\u003c\/li\u003e\n\u003cli\u003eRed (D003ROS)\u003c\/li\u003e\n\u003cli\u003eSilver (D003SIL)\u003c\/li\u003e\n\u003cli\u003eCobalt (D003COB)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis LighTech rear wheel nut is a direct-fit replacement for all three chassis generations of the Yamaha YZF-R6:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eYamaha YZF-R6 RJ11 (2006–2007)\u003c\/li\u003e\n\u003cli\u003eYamaha YZF-R6 RJ15 (2008–2016)\u003c\/li\u003e\n\u003cli\u003eYamaha YZF-R6 RJ27 (2017–2026)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eD003\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eErgal 7075 aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread\u003c\/td\u003e\n\u003ctd\u003eM24x1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e39 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e17.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHex diameter\u003c\/td\u003e\n\u003ctd\u003e30 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum tightening torque\u003c\/td\u003e\n\u003ctd\u003e140 Nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurface finish\u003c\/td\u003e\n\u003ctd\u003eAnodised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"LighTech","offers":[{"title":"Black","offer_id":53167137980682,"sku":"D003NER","price":25.49,"currency_code":"EUR","in_stock":true},{"title":"Blue","offer_id":53167138013450,"sku":"D003COB","price":25.49,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":53167138046218,"sku":"D003ROS","price":25.49,"currency_code":"EUR","in_stock":true},{"title":"Gold","offer_id":53167138078986,"sku":"D003ORO","price":25.49,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":53167138111754,"sku":"D003SIL","price":25.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/D003NER_1c6fe1c8-3dfc-4963-9a7c-a055b6bd4305.png?v=1780791144"},{"product_id":"lightech-rear-wheel-nut-triumph-daytona-675-675r-d004","title":"LighTech Rear Wheel Nut Triumph Daytona 675 \/ 675R (2013-2017) D004","description":"\u003cp\u003eWhen every fraction of a second counts on track, the details that most riders overlook become the details that matter most. The LighTech rear wheel nut for the Triumph Daytona 675 and 675R (2013–2017) is machined from Ergal 7075 aluminium — the same aerospace-grade alloy used where structural integrity and weight savings are non-negotiable — delivering a direct, measurable reduction in unsprung mass right at the rear axle.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eErgal 7075 aluminium construction: exceptional strength-to-weight ratio sourced from aerospace engineering, engineered for racing punishment\u003c\/li\u003e\n\u003cli\u003eCNC-machined to exacting tolerances for a perfect fit on Triumph Daytona 675 and 675R axle threads, eliminating play and ensuring repeatable torque retention\u003c\/li\u003e\n\u003cli\u003eHard anodised surface finish: corrosion-resistant and built to withstand the heat cycles and grime of both circuit and road use\u003c\/li\u003e\n\u003cli\u003eThread specification M18x1.5 with a maximum tightening torque of 120 Nm — race-ready security without compromise\u003c\/li\u003e\n\u003cli\u003eAvailable in five anodised colours to complement your Daytona's livery: black (D004NER), gold (D004ORO), red (D004ROS), silver (D004SIL), and cobalt blue (D004COB)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTrack Performance, Road Confidence\u003c\/h2\u003e\u003cp\u003eThe Triumph Daytona 675 is a machine built around precision — a high-revving inline triple that rewards riders who pay attention to every component. Replacing the standard rear wheel nut with the LighTech D004 is a straightforward upgrade that contributes to reduced rotating mass and adds a considered, purposeful aesthetic. The 22 mm hex diameter is compatible with standard pit tooling, so there is no extra spanner required in the paddock bag. The 14 mm height and 29 mm outer diameter keep the profile compact and unobtrusive beneath the tail section.\u003c\/p\u003e\u003ch2\u003eBuild Quality\u003c\/h2\u003e\u003cp\u003eLighTech has established itself as a benchmark supplier to racing teams across Europe, producing CNC components held to the tolerances that professional paddocks demand. The Ergal 7075 alloy used here is a step above the 6000-series aluminium found in most aftermarket hardware — higher tensile strength, better fatigue resistance under repeated loading, and a surface that takes anodising exceptionally well for long-term colour retention. Every nut leaves the factory with thread geometry verified for consistent engagement across the full torque range up to 120 Nm.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eTriumph Daytona 675 (2013–2017)\u003c\/li\u003e\n\u003cli\u003eTriumph Daytona 675R (2013–2017)\u003c\/li\u003e\n\u003cli\u003ePart number: D004 (suffix by colour: D004NER \/ D004ORO \/ D004ROS \/ D004SIL \/ D004COB)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eLighTech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eD004\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eErgal 7075 aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread\u003c\/td\u003e\n\u003ctd\u003eM18x1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter diameter\u003c\/td\u003e\n\u003ctd\u003e29 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e14 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHex diameter\u003c\/td\u003e\n\u003ctd\u003e22 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum tightening torque\u003c\/td\u003e\n\u003ctd\u003e120 Nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurface finish\u003c\/td\u003e\n\u003ctd\u003eAnodised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"LighTech","offers":[{"title":"Black","offer_id":53167138144522,"sku":"D004NER","price":23.67,"currency_code":"EUR","in_stock":true},{"title":"Blue","offer_id":53167138177290,"sku":"D004COB","price":23.67,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":53167138210058,"sku":"D004ROS","price":23.67,"currency_code":"EUR","in_stock":true},{"title":"Gold","offer_id":53167138242826,"sku":"D004ORO","price":23.67,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":53167138275594,"sku":"D004SIL","price":23.67,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/D004NER_04514b2b-e325-43cd-8c91-563dd63edb61.png?v=1780791146"},{"product_id":"lightech-steering-head-nut-suzuki-gsx-r-600-750","title":"LighTech Steering Head Nut for Suzuki GSX-R 600\/750 (2006–2017) – D014","description":"\u003cp\u003eA practical upgrade that earns its place on road and track alike, the LighTech D014 steering head nut gives GSX-R 600 and 750 owners a precision-machined, anodised replacement that is noticeably lighter than the factory item without sacrificing an ounce of structural integrity. Whether you are prepping for a trackday or simply refreshing a tired chassis component, this is a straightforward fit with an immediate visual payoff.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMachined from Ergal 7075 aluminium — an aerospace-grade alloy chosen for its exceptional strength-to-weight ratio, reducing unsprung mass at the steering head.\u003c\/li\u003e\n\u003cli\u003eCNC-precision manufacture guarantees consistent thread geometry and a flush, rattle-free fit every time.\u003c\/li\u003e\n\u003cli\u003eHard anodised surface finish resists corrosion, scratches and UV fade — keeping the part looking sharp season after season.\u003c\/li\u003e\n\u003cli\u003eRated to a maximum tightening torque of 520 Nm, meeting the demands of aggressive track use as well as everyday road riding.\u003c\/li\u003e\n\u003cli\u003eAvailable in five anodised colours — black (D014NER), gold (D014ORO), red (D014ROS), silver (D014SIL) and cobalt blue (D014COB) — so you can match or contrast your GSX-R's livery.\u003c\/li\u003e\n\u003cli\u003eDirect OEM replacement; no modification required for fitment.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Performance\u003c\/h2\u003e\u003cp\u003eLighTech designed the D014 around two principles that matter most to riders who use their bikes hard: dimensional accuracy and material quality. Ergal 7075 is the same aluminium alloy used in competition-grade components across MotoGP and WSBK paddocks. Its high tensile strength means the nut handles the clamping loads of the steering head without creep or deformation, while the reduced mass compared to a steel OEM nut delivers a marginal but real improvement to overall chassis feel. The M28x1 thread pitch is machined to tight tolerances, so installation is smooth and the nut seats exactly where it should — no cross-threading risk, no shimming.\u003c\/p\u003e\u003ch2\u003eEveryday Usability\u003c\/h2\u003e\u003cp\u003eUnlike many aftermarket components positioned purely at the racing market, the D014 is equally at home on a commuter or weekend sports bike. The anodised finish is robust enough to tolerate regular fork seal changes and bearing services without marking, and the 34 mm hex drive means a standard steering head socket fits without adapters. If you are servicing your steering head bearings or carrying out a fork rebuild, swapping in a D014 at the same time adds a colour-matched finishing touch with no extra labour cost.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSuzuki GSX-R 600 (2006–2017)\u003c\/li\u003e\n\u003cli\u003eSuzuki GSX-R 750 (2006–2017)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eD014\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread\u003c\/td\u003e\n\u003ctd\u003eM28x1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter diameter\u003c\/td\u003e\n\u003ctd\u003e42.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e19.7 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHex drive diameter\u003c\/td\u003e\n\u003ctd\u003e34 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum tightening torque\u003c\/td\u003e\n\u003ctd\u003e520 Nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eErgal 7075 aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurface finish\u003c\/td\u003e\n\u003ctd\u003eHard anodised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"LighTech","offers":[{"title":"Black","offer_id":53167138308362,"sku":"D014NER","price":24.85,"currency_code":"EUR","in_stock":true},{"title":"Blue","offer_id":53167138341130,"sku":"D014COB","price":24.85,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":53167138373898,"sku":"D014ROS","price":24.85,"currency_code":"EUR","in_stock":true},{"title":"Gold","offer_id":53167138406666,"sku":"D014ORO","price":24.85,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":53167138439434,"sku":"D014SIL","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/D014NER_20401c1a-1efe-49d6-a561-6e0f38efea7e.png?v=1780791147"},{"product_id":"lightech-steering-head-nut-kawasaki-zx-10-r-rr-d014","title":"LighTech Steering Head Nut Kawasaki ZX-10 R\/RR (2011-2026) D014","description":"\u003cp\u003eWhen every gram and every fraction of a degree of steering precision matters on track, the LighTech steering head nut for the Kawasaki ZX-10 R\/RR (2011–2026) delivers racing-grade rigidity at a weight that stock hardware simply cannot match. Machined from Ergal 7075 aluminium — the same aerospace-derived alloy trusted by factory race teams — this nut is purpose-built for riders who demand front-end accuracy whether they are chasing lap times or committing to a fast road session.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eErgal 7075 aluminium construction: an ultralight, extremely high-tensile alloy that maintains structural integrity under the sustained lateral loads of hard braking and fast direction changes.\u003c\/li\u003e\n\u003cli\u003eCNC-machined to exacting tolerances for a precise, rattle-free fit that reproduces the factory steering geometry exactly as intended.\u003c\/li\u003e\n\u003cli\u003eHard-anodised finish provides corrosion resistance and a clean, race-ready aesthetic that complements any ZX-10 R colour scheme.\u003c\/li\u003e\n\u003cli\u003eM28x1 thread with a maximum tightening torque of 520 Nm ensures the steering assembly stays correctly preloaded through an entire track session.\u003c\/li\u003e\n\u003cli\u003eAvailable in five anodised colours — black, blue, red, gold and silver — allowing straightforward visual matching to team or bike livery.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEngineering Detail\u003c\/h2\u003e\u003cp\u003eThe geometry of this nut is engineered specifically for the ZX-10 R\/RR steering head. At 42.3 mm outer diameter, 19.7 mm height and a 34 mm hex drive, it interfaces directly with standard ZX-10 R tooling and aftermarket steering damper kits without modification. The Ergal 7075 alloy has a significantly higher strength-to-weight ratio than the cast steel or standard aluminium alloys used in OEM hardware, meaning you lose mass from an area of the chassis that directly influences handling feel without sacrificing any clamping security.\u003c\/p\u003e\u003ch2\u003eTrack \u0026amp; Road Performance\u003c\/h2\u003e\u003cp\u003eOn circuit, front-end confidence is everything. A correctly preloaded steering head nut eliminates the vague, slightly elastic feeling that worn or incorrectly torqued OEM hardware can introduce at high lean angles. LighTech designed this component explicitly for performance riding environments — whether that means a Superbike class race weekend, a fast trackday, or spirited road riding where the ZX-10 R's legendary chassis deserves hardware that keeps pace with it.\u003c\/p\u003e\u003ch2\u003eColour Variants \u0026amp; Part Numbers\u003c\/h2\u003e\u003cp\u003eEach colour is a separately anodised finish applied to the same precision-machined billet. The individual part codes are as follows: black (D014NER), gold (D014ORO), red (D014ROS), silver (D014SIL), cobalt blue (D014COB).\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eKawasaki ZX-10 R (2011–2026)\u003c\/li\u003e\n\u003cli\u003eKawasaki ZX-10 RR (2011–2026)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread\u003c\/td\u003e\n\u003ctd\u003eM28x1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter diameter\u003c\/td\u003e\n\u003ctd\u003e42.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e19.7 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHex drive diameter\u003c\/td\u003e\n\u003ctd\u003e34 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum tightening torque\u003c\/td\u003e\n\u003ctd\u003e520 Nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eErgal 7075 aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurface finish\u003c\/td\u003e\n\u003ctd\u003eHard anodised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eD014\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"LighTech","offers":[{"title":"Black","offer_id":53167138472202,"sku":"D014NER","price":24.85,"currency_code":"EUR","in_stock":true},{"title":"Blue","offer_id":53167138504970,"sku":"D014COB","price":24.85,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":53167138537738,"sku":"D014ROS","price":24.85,"currency_code":"EUR","in_stock":true},{"title":"Gold","offer_id":53167138570506,"sku":"D014ORO","price":24.85,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":53167138603274,"sku":"D014SIL","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/D014NER_460c9f61-6b25-4bff-9af2-227f0243c72e.png?v=1780791147"},{"product_id":"lightech-swingarm-axle-nut-yamaha-yzf-r6-rj11-rj15-rj27-d018","title":"LighTech Swingarm Axle Nut Yamaha YZF-R6 RJ11, RJ15, RJ27 (2006-2026) D018","description":"\u003cp\u003eWhen every gram and every tenth of a second counts on track, the LighTech swingarm axle nut for the Yamaha YZF-R6 RJ11, RJ15, RJ27 (2006–2026) delivers exactly where factory hardware falls short. CNC-machined from aerospace-grade Ergal 7075 aluminium and finished with a hard anodised surface, this is a direct-fit racing upgrade engineered to perform under the sustained stress of a full race weekend — not just a cosmetic flourish.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eErgal 7075 aluminium construction — the same aerospace alloy trusted in motorsport applications for its exceptional strength-to-weight ratio\u003c\/li\u003e\n\u003cli\u003eCNC-machined to exacting tolerances for a perfect, rattle-free fit on the YZF-R6 swingarm axle\u003c\/li\u003e\n\u003cli\u003eHard anodised surface provides durable corrosion resistance and a purposeful racing aesthetic in five colour options\u003c\/li\u003e\n\u003cli\u003eThread specification M22x1.5 with a maximum torque rating of 130 Nm — fully compatible with standard and race-spec torque procedures\u003c\/li\u003e\n\u003cli\u003eSaves weight over the OEM steel nut — a meaningful gain when combined with other LighTech lightweight chassis components\u003c\/li\u003e\n\u003cli\u003eAvailable in black (D018NER), gold (D018ORO), red (D018ROS), silver (D018SIL) and cobalt (D018COB) to coordinate with your livery\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eRace-Bred Construction\u003c\/h2\u003e\u003cp\u003eLighTech developed this swingarm axle nut as part of their broader programme of CNC-machined chassis accessories, targeting the trackday and club-racing market where reducing unsprung and rotating mass has a measurable effect on handling response. The Ergal 7075 alloy is heat-treated to maximise tensile strength while keeping the component as light as the design allows. The anodised finish is not purely decorative — it adds a hard surface layer that resists the abrasion and chemical attack that comes with regular swingarm removal during tyre changes in a pit environment.\u003c\/p\u003e\u003ch2\u003ePrecision Engineering, Zero Compromise\u003c\/h2\u003e\u003cp\u003eThe nut is machined to a thread pitch of M22x1.5 with an outer diameter of 38.4 mm, a height of 19.5 mm and a hex diameter of 32 mm. The 130 Nm maximum torque specification means it can be installed to OEM-recommended settings without reservation, and removed cleanly race after race without the thread degradation that plagues softer alloy alternatives. For serious R6 campaigners running the same chassis through multiple seasons, that long-term durability matters as much as the initial weight saving.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eYamaha YZF-R6 RJ11 (2006–2007)\u003c\/li\u003e\n\u003cli\u003eYamaha YZF-R6 RJ15 (2008–2016)\u003c\/li\u003e\n\u003cli\u003eYamaha YZF-R6 RJ27 (2017–2026)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePart number: D018. Always verify fitment against your frame number before ordering if your model year falls at a generation boundary.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eLighTech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eD018\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eErgal 7075 aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread\u003c\/td\u003e\n\u003ctd\u003eM22x1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Diameter\u003c\/td\u003e\n\u003ctd\u003e38.4 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e19.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHex Diameter\u003c\/td\u003e\n\u003ctd\u003e32 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Torque\u003c\/td\u003e\n\u003ctd\u003e130 Nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurface Finish\u003c\/td\u003e\n\u003ctd\u003eHard anodised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"LighTech","offers":[{"title":"Black","offer_id":53167138636042,"sku":"D018NER","price":25.49,"currency_code":"EUR","in_stock":true},{"title":"Blue","offer_id":53167138668810,"sku":"D018COB","price":25.49,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":53167138701578,"sku":"D018ROS","price":25.49,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":53167138767114,"sku":"D018SIL","price":25.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/D018NER_b2c284f4-1843-4b1e-b4f8-559d1df13420.png?v=1780791148"},{"product_id":"lightech-rear-wheel-nut-suzuki-gsx-r-600-750","title":"LighTech Rear Wheel Nut for Suzuki GSX-R 600\/750 (2011–2017) – Ergal 7075 Aluminium D018","description":"\u003cp\u003eWhen wheel security and weight savings matter most, the LighTech D018 rear wheel nut delivers aerospace-grade reliability for your Suzuki GSX-R 600\/750 (2011–2017). Machined from Ergal 7075 aluminium — the same alloy trusted in aviation and professional motorsport — it provides exceptional clamping strength at a fraction of the weight of a standard steel nut, with a rated maximum torque of 130 Nm that meets the demands of both road riding and circuit work.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eErgal 7075 aluminium construction: aviation-specification alloy combining extreme tensile strength with significant weight reduction over OEM steel hardware\u003c\/li\u003e\n\u003cli\u003eCNC-precision machined for exact dimensional accuracy — thread M22x1.5, diameter 38.4 mm, height 19.5 mm, hex diameter 32 mm\u003c\/li\u003e\n\u003cli\u003eHard anodised finish for corrosion resistance and a durable, motorsport-inspired appearance\u003c\/li\u003e\n\u003cli\u003eMaximum rated torque of 130 Nm ensures a secure, confidence-inspiring installation under sustained track stress\u003c\/li\u003e\n\u003cli\u003eAvailable in five anodised colours — each with its own LighTech part number — so fitment and finish can be matched precisely to your build\u003c\/li\u003e\n\u003cli\u003eIdeal upgrade for trackday riders and road enthusiasts seeking genuine performance hardware without cosmetic compromise\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEngineering \u0026amp; Build Quality\u003c\/h2\u003e\u003cp\u003eErgal 7075 is not a generic aluminium alloy. Its zinc-dominant composition gives it yield strength approaching that of mild steel while keeping mass to a minimum — a trade-off that aerospace and racing engineers have relied on for decades. LighTech machines every D018 nut to tight CNC tolerances, so the M22x1.5 thread engages cleanly with the GSX-R's rear axle and seats flush without play. The anodised surface layer bonds chemically with the aluminium rather than sitting on top of it, meaning it resists chipping, corrosion and fuel splash far better than painted equivalents.\u003c\/p\u003e\u003ch2\u003eRoad \u0026amp; Track Use\u003c\/h2\u003e\u003cp\u003eAt 130 Nm maximum torque, the D018 is rated well within the GSX-R's factory wheel-nut torque specification, making it straightforward to install with a standard torque wrench and a 32 mm hex socket. On the track, where wheels are inspected and re-torqued between sessions, the hex geometry and precision finish make the job faster and more consistent than fighting corroded OEM hardware. On the road, the weight saved at the rear axle — an unsprung, rotating mass location where every gram counts — contributes to more responsive acceleration and a slightly lighter steering feel over distance.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSuzuki GSX-R 600 (2011–2017)\u003c\/li\u003e\n\u003cli\u003eSuzuki GSX-R 750 (2011–2017)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eColour Options \u0026amp; Part Numbers\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBlack – D018NER\u003c\/li\u003e\n\u003cli\u003eGold – D018ORO\u003c\/li\u003e\n\u003cli\u003eRed – D018ROS\u003c\/li\u003e\n\u003cli\u003eSilver – D018SIL\u003c\/li\u003e\n\u003cli\u003eCobalt – D018COB\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eD018\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eLighTech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eErgal 7075 aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread\u003c\/td\u003e\n\u003ctd\u003eM22x1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter diameter\u003c\/td\u003e\n\u003ctd\u003e38.4 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e19.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHex diameter\u003c\/td\u003e\n\u003ctd\u003e32 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum torque\u003c\/td\u003e\n\u003ctd\u003e130 Nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurface finish\u003c\/td\u003e\n\u003ctd\u003eAnodised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"LighTech","offers":[{"title":"Black","offer_id":53167138799882,"sku":"D018NER","price":25.49,"currency_code":"EUR","in_stock":true},{"title":"Blue","offer_id":53167138832650,"sku":"D018COB","price":25.49,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":53167138865418,"sku":"D018ROS","price":25.49,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":53167138930954,"sku":"D018SIL","price":25.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/D018NER_06a1b136-1f4a-46b6-ad7b-f8e61e5ee669.png?v=1780791149"},{"product_id":"lightech-swingarm-axle-nut-suzuki-gsx-r-600-750","title":"LighTech Swingarm Axle Nut for Suzuki GSX-R 600\/750 (2006–2017) – Ergal 7075 Aluminium D010","description":"\u003cp\u003eWhen every gram and every connection point matters, the LighTech D010 swingarm axle nut sets a standard that OEM hardware cannot match. Manufactured from aerospace-grade Ergal 7075 aluminium with a rated maximum torque capacity of 125 Nm, this precision component is engineered to meet the demanding safety margins of both circuit and road use — giving GSX-R 600 and GSX-R 750 riders genuine confidence in a part they will never see but always rely on.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMachined from Ergal 7075 aluminium: one of the highest-strength aluminium alloys available, chosen for its exceptional strength-to-weight ratio and structural integrity under repeated high-torque loading\u003c\/li\u003e\n\u003cli\u003eRated to a maximum tightening torque of 125 Nm, ensuring the axle nut meets the safety-critical clamping requirements of the swingarm assembly\u003c\/li\u003e\n\u003cli\u003eCNC-precision machined for exact dimensional conformance — M20x1.5 thread, 34.8 mm diameter, 15 mm height, 27 mm hex across-flats — guaranteeing a perfect, wobble-free fit every time\u003c\/li\u003e\n\u003cli\u003eHard anodised surface treatment resists corrosion, road contamination and track-day grime while maintaining a clean racing aesthetic over the long term\u003c\/li\u003e\n\u003cli\u003eDirect OEM-pattern replacement: no modification, no adapters, no compromise to the original safety envelope of the swingarm pivot\u003c\/li\u003e\n\u003cli\u003eAvailable in five anodised colours — black, blue, red, gold and silver — so your chosen finish complements the bike's livery without sacrificing an ounce of function\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePrecision Engineering for Track and Road\u003c\/h2\u003e\u003cp\u003eLighTech developed the D010 specifically around the swingarm axle geometry of the Suzuki GSX-R 600 and GSX-R 750 from the 2006 model year through to 2017. The M20x1.5 fine thread pitch is retained from the OEM specification so torque is distributed evenly across the thread engagement, reducing the risk of galling or thread damage on removal. The 27 mm hex diameter is compatible with standard pit-lane tooling, and the compact 15 mm stack height keeps the nut neatly within the swingarm recess. Because the nut is machined rather than cast, wall consistency is uniform throughout — there are no voids or porosity issues that can compromise clamping force under load.\u003c\/p\u003e\u003ch2\u003eSwingarm Safety and Clamping Integrity\u003c\/h2\u003e\u003cp\u003eThe swingarm axle nut is one of the most safety-critical fasteners on any sportsbike. It retains the rear axle under the full braking, acceleration and cornering forces generated by a litre-class machine. LighTech's decision to specify Ergal 7075 — the same alloy family used in aerospace structural components — rather than standard 6061 aluminium reflects an understanding of real-world fatigue behaviour. Combined with the 125 Nm torque rating and a corrosion-resistant anodised finish that protects thread integrity over time, the D010 delivers a safety margin that riders and mechanics can trust in the pits or on the road.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSuzuki GSX-R 600 (2006–2017)\u003c\/li\u003e\n\u003cli\u003eSuzuki GSX-R 750 (2006–2017)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eD010\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread\u003c\/td\u003e\n\u003ctd\u003eM20x1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter diameter\u003c\/td\u003e\n\u003ctd\u003e34.8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e15 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHex diameter\u003c\/td\u003e\n\u003ctd\u003e27 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum tightening torque\u003c\/td\u003e\n\u003ctd\u003e125 Nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eErgal 7075 aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurface finish\u003c\/td\u003e\n\u003ctd\u003eHard anodised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour options\u003c\/td\u003e\n\u003ctd\u003eBlack (D010NER), Blue (D010COB), Red (D010ROS), Gold (D010ORO), Silver (D010SIL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"LighTech","offers":[{"title":"Black","offer_id":53167138996490,"sku":"D010NER","price":22.92,"currency_code":"EUR","in_stock":true},{"title":"Blue","offer_id":53167139029258,"sku":"D010COB","price":22.92,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":53167139062026,"sku":"D010ROS","price":22.92,"currency_code":"EUR","in_stock":true},{"title":"Gold","offer_id":53167139094794,"sku":"D010ORO","price":22.92,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":53167139127562,"sku":"D010SIL","price":22.92,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/D010NER_278a8446-9a19-43a0-950c-238c6b95a6d1.png?v=1780791150"},{"product_id":"lightech-steering-head-nut-yamaha-yzf-r6-rj11-rj15-rj27-d014","title":"LighTech Steering Head Nut Yamaha YZF-R6 RJ11, RJ15, RJ27 (2006–2026) D014","description":"\u003cp\u003eStructural integrity at the heart of your R6's steering geometry is non-negotiable, and the LighTech D014 steering head nut is engineered to meet exactly that standard. Machined from aerospace-grade Ergal 7075 aluminium and available in five anodised finishes, it delivers the dimensional precision and rated torque capacity that circuit riding demands — without adding unnecessary mass to the front end.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eErgal 7075 aluminium construction: the same alloy class trusted in aerospace applications, combining exceptional tensile strength with genuine corrosion resistance\u003c\/li\u003e\n\u003cli\u003eCNC-machined to tight tolerances for a direct, rattle-free fit on the Yamaha YZF-R6 steering head — no modification required\u003c\/li\u003e\n\u003cli\u003eRated to a maximum tightening torque of 520 Nm, providing the clamping confidence needed for aggressive track use\u003c\/li\u003e\n\u003cli\u003eM28x1 thread, 42.3 mm outer diameter, 19.7 mm height and 34 mm hex diameter — exact OEM replacement geometry\u003c\/li\u003e\n\u003cli\u003eHard anodised surface in five colours: a finish that resists abrasion and UV degradation far better than paint\u003c\/li\u003e\n\u003cli\u003eEqually at home on a weekend trackday machine or a road-registered R6 used daily\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEngineering \u0026amp; Build Quality\u003c\/h2\u003e\u003cp\u003eLighTech developed the D014 series specifically around the Yamaha YZF-R6 chassis, which has been produced across three generation codes — RJ11, RJ15 and RJ27 — over a twenty-year production run. The steering head nut sits at a critical load point, and Ergal 7075 was chosen here because its strength-to-weight ratio outperforms standard 6061 alloy by a significant margin while remaining far lighter than steel. Every unit leaves the CNC centre with the thread pitch, outer diameter and hex dimension dialled in to the same specification, so fitment is consistent and the factory torque value can be applied without concern. The anodised finish is not merely decorative: hard anodising creates a surface layer that is integral to the metal rather than applied on top of it, giving the nut lasting protection against the elements, chain lube overspray and general workshop handling.\u003c\/p\u003e\u003ch2\u003eTrack \u0026amp; Road Performance\u003c\/h2\u003e\u003cp\u003eWhen the front end is working hard through fast chicanes or under heavy braking, the last thing a rider wants is any ambiguity in steering-head preload. The 520 Nm maximum tightening torque specification gives workshop technicians a clear, safe upper limit, and the precise hex diameter of 34 mm means a correct-sized socket seats cleanly without rounding. The weight saving over a stock steel nut is a tangible front-end benefit on a machine where every gram at the extremities influences feel. Whether you are chasing lap times or simply refreshing worn chassis hardware with something of higher quality, the D014 represents a direct, certified upgrade.\u003c\/p\u003e\u003ch2\u003eColour Options\u003c\/h2\u003e\u003cp\u003eEach colour variant is identified by its own part number suffix. Choose the finish that best matches your R6's livery or personal preference:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBlack (D014NER)\u003c\/li\u003e\n\u003cli\u003eGold (D014ORO)\u003c\/li\u003e\n\u003cli\u003eRed (D014ROS)\u003c\/li\u003e\n\u003cli\u003eSilver (D014SIL)\u003c\/li\u003e\n\u003cli\u003eCobalt (D014COB)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eYamaha YZF-R6 RJ11 (2006–2007)\u003c\/li\u003e\n\u003cli\u003eYamaha YZF-R6 RJ15 (2008–2016)\u003c\/li\u003e\n\u003cli\u003eYamaha YZF-R6 RJ27 (2017–2026)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eLighTech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eD014\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eErgal 7075 aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread\u003c\/td\u003e\n\u003ctd\u003eM28x1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter diameter\u003c\/td\u003e\n\u003ctd\u003e42.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e19.7 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHex diameter\u003c\/td\u003e\n\u003ctd\u003e34 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum tightening torque\u003c\/td\u003e\n\u003ctd\u003e520 Nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurface finish\u003c\/td\u003e\n\u003ctd\u003eHard anodised, available in black, blue, red, gold, silver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eYamaha YZF-R6 RJ11 (2006–2007), RJ15 (2008–2016), RJ27 (2017–2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"LighTech","offers":[{"title":"Black","offer_id":53167139324170,"sku":"D014NER","price":24.85,"currency_code":"EUR","in_stock":true},{"title":"Blue","offer_id":53167139356938,"sku":"D014COB","price":24.85,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":53167139389706,"sku":"D014ROS","price":24.85,"currency_code":"EUR","in_stock":true},{"title":"Gold","offer_id":53167139422474,"sku":"D014ORO","price":24.85,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":53167139455242,"sku":"D014SIL","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/D014NER_95b2bc37-d320-490d-8898-590a88a9cdd6.png?v=1780791152"},{"product_id":"lightech-rear-wheel-nut-yamaha-yzf-r1-m-d003","title":"LighTech Rear Wheel Nut Yamaha YZF-R1\/M (2007-2026) D003 - Ergal 7075 Aluminium","description":"\u003cp\u003eWhen the integrity of your rear axle nut is non-negotiable, the LighTech D003 rear wheel nut delivers the engineering rigour your Yamaha YZF-R1 or YZF-R1M deserves. Machined from aerospace-grade Ergal 7075 aluminium — a material trusted in aviation for its exceptional strength-to-weight ratio — this nut is built to maintain a secure, precise fitment through repeated track sessions and daily road use alike.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eErgal 7075 aluminium construction: aerospace-derived alloy combining extreme structural integrity with a significant weight reduction over steel equivalents\u003c\/li\u003e\n\u003cli\u003eCNC-precision machined for an exact, rattle-free fit on the rear axle of the YZF-R1\/M — no shimming, no compromise\u003c\/li\u003e\n\u003cli\u003eHard anodised finish: provides robust corrosion resistance and a clean racing aesthetic that holds up under heat and road exposure\u003c\/li\u003e\n\u003cli\u003eRated to a maximum tightening torque of 140 Nm, meeting the demands of both road and race environments\u003c\/li\u003e\n\u003cli\u003eAvailable in five anodised colours with individual part number references for accurate reordering\u003c\/li\u003e\n\u003cli\u003eSuits both road and track use — a direct upgrade over the OEM nut without any modification required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEngineering \u0026amp; Build Quality\u003c\/h2\u003e\u003cp\u003eThe D003 is not a cosmetic accessory — it is a safety-critical fastener engineered to the same standards LighTech apply to their competition components. The M24x1.5 thread pitch is machined to tight tolerances, ensuring consistent clamp load every time the nut is torqued to the specified 140 Nm. With a diameter of 39 mm, a height of 17.5 mm and a hex drive diameter of 30 mm, the geometry is compatible with standard race tooling, making wheel changes at the paddock straightforward and consistent.\u003c\/p\u003e\u003cp\u003eThe hard anodising applied to each colour variant is not purely visual. It adds a surface hardness layer that protects the aluminium from fretting, corrosion and the thermal cycling inherent to track use. Each nut leaves the LighTech facility individually inspected, reflecting the brand's motorsport heritage.\u003c\/p\u003e\u003ch2\u003eRoad \u0026amp; Track Performance\u003c\/h2\u003e\u003cp\u003eOn the road, the D003 replaces a heavy OEM steel nut with an Ergal piece that trims unsprung rotating mass at the rear wheel — a tangible benefit that compounds with every other weight-saving modification on the bike. On circuit, consistent torque retention under the thermal and mechanical loads of repeated hard braking and acceleration is precisely where the Ergal 7075 alloy earns its place. Riders competing in club or national-level events who strip and rebuild wheels regularly will appreciate the thread quality and the colour-coded identification that makes part tracking straightforward.\u003c\/p\u003e\u003ch2\u003eColour Options \u0026amp; Part Numbers\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBlack — D003NER\u003c\/li\u003e\n\u003cli\u003eGold — D003ORO\u003c\/li\u003e\n\u003cli\u003eRed — D003ROS\u003c\/li\u003e\n\u003cli\u003eSilver — D003SIL\u003c\/li\u003e\n\u003cli\u003eCobalt — D003COB\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eYamaha YZF-R1 (2007–2026)\u003c\/li\u003e\n\u003cli\u003eYamaha YZF-R1M (2015–2026)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eD003\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eErgal 7075 aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread\u003c\/td\u003e\n\u003ctd\u003eM24x1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e39 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e17.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHex drive diameter\u003c\/td\u003e\n\u003ctd\u003e30 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum tightening torque\u003c\/td\u003e\n\u003ctd\u003e140 Nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurface finish\u003c\/td\u003e\n\u003ctd\u003eHard anodised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eRoad and track\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"LighTech","offers":[{"title":"Black","offer_id":53167140897034,"sku":"D003NER","price":25.49,"currency_code":"EUR","in_stock":true},{"title":"Blue","offer_id":53167140929802,"sku":"D003COB","price":25.49,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":53167140962570,"sku":"D003ROS","price":25.49,"currency_code":"EUR","in_stock":true},{"title":"Gold","offer_id":53167140995338,"sku":"D003ORO","price":25.49,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":53167141028106,"sku":"D003SIL","price":25.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/D003NER_719e82fe-eb75-4dcf-92ea-8467c2f397d1.png?v=1780791236"},{"product_id":"lightech-swingarm-axle-nut-kawasaki-zx-10-r-rr-d010","title":"LighTech Swingarm Axle Nut Kawasaki ZX-10 R\/RR (2011-2026) D010","description":"\u003cp\u003eEngineered for riders who demand a precise, confidence-inspiring fit every time they torque down the swingarm axle, the LighTech D010 swingarm axle nut is machined from Ergal 7075 aluminium — one of the highest-grade aerospace alloys available — delivering exceptional strength and notable weight savings in a single compact component. Available in five anodised colours to complement your ZX-10 R or ZX-10 RR build, it is equally at home on a trackday machine and a road-registered superbike.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eErgal 7075 aluminium construction — ultralight yet extraordinarily rigid and corrosion-resistant for long-term reliability\u003c\/li\u003e\n\u003cli\u003eCNC-machined to tight tolerances for a consistently secure, rattle-free fit on the swingarm axle\u003c\/li\u003e\n\u003cli\u003eHard anodised finish protects against corrosion and scuffing while adding a clean racing aesthetic\u003c\/li\u003e\n\u003cli\u003eM20x1.5 thread with a 27 mm hex profile and a maximum tightening torque of 125 Nm\u003c\/li\u003e\n\u003cli\u003eFive colour options — each with a dedicated part number — so you can match or contrast your ZX-10 R\/RR's livery precisely\u003c\/li\u003e\n\u003cli\u003eSuitable for both road and track use without compromise\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Performance\u003c\/h2\u003e\u003cp\u003eLighTech's CNC machining process removes every unnecessary gram while preserving the structural integrity demanded by repeated high-load track sessions. The Ergal 7075 alloy used here is the same grade favoured in motorsport and aerospace applications: it offers a superior strength-to-weight ratio compared with standard 6061 aluminium, resisting deformation even under the 125 Nm maximum tightening torque specified for this application. The anodised surface treatment is integral to the alloy rather than simply a coating, which means it will not flake or peel under the combined assault of tyre spray, chain lubricant and road grime.\u003c\/p\u003e\u003ch2\u003eColour Options and Part Numbers\u003c\/h2\u003e\u003cp\u003eEach colour variant of the D010 carries its own dedicated part number for straightforward ordering and workshop identification:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBlack — D010NER\u003c\/li\u003e\n\u003cli\u003eGold — D010ORO\u003c\/li\u003e\n\u003cli\u003eRed — D010ROS\u003c\/li\u003e\n\u003cli\u003eSilver — D010SIL\u003c\/li\u003e\n\u003cli\u003eCobalt — D010COB\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis swingarm axle nut is a direct, precision fit for the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKawasaki ZX-10 R (2011–2026)\u003c\/li\u003e\n\u003cli\u003eKawasaki ZX-10 RR (2011–2026)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePart number: D010. Always verify your specific model year and axle specification before fitting.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eLighTech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eD010\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eErgal 7075 aluminium, anodised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread\u003c\/td\u003e\n\u003ctd\u003eM20x1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e34.8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e15 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHex diameter\u003c\/td\u003e\n\u003ctd\u003e27 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum tightening torque\u003c\/td\u003e\n\u003ctd\u003e125 Nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eKawasaki ZX-10 R \/ ZX-10 RR (2011–2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"LighTech","offers":[{"title":"Black","offer_id":53167487844618,"sku":"D010NER","price":22.92,"currency_code":"EUR","in_stock":true},{"title":"Blue","offer_id":53167487877386,"sku":"D010COB","price":22.92,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":53167487910154,"sku":"D010ROS","price":22.92,"currency_code":"EUR","in_stock":true},{"title":"Gold","offer_id":53167487942922,"sku":"D010ORO","price":22.92,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":53167487975690,"sku":"D010SIL","price":22.92,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/D010NER_a25d8926-927f-47f9-8466-d43f8963e87c.png?v=1780798691"},{"product_id":"lightech-rear-axle-nut-honda-cbr-1000-rr-r-sc82-d003","title":"LighTech Rear Axle Nut Honda CBR 1000 RR-R SC82 (2020-2026) D003","description":"\u003cp\u003eWhen every gram and every safety margin counts, the LighTech rear axle nut for the Honda CBR 1000 RR-R SC82 (2020–2026) delivers on both fronts. Rated to a maximum torque of 140 Nm and machined to exacting tolerances from Ergal 7075 aluminium, this nut meets the structural demands of track use while shaving meaningful unsprung weight from your rear wheel assembly.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eErgal 7075 aluminium construction — an aerospace-grade alloy chosen for its exceptional strength-to-weight ratio, ensuring the nut holds firm under the repeated stress of hard braking and acceleration\u003c\/li\u003e\n\u003cli\u003eMaximum rated torque of 140 Nm provides the confidence of a properly engineered safety specification, whether you are setting up for a trackday or returning the bike to road trim\u003c\/li\u003e\n\u003cli\u003eCNC-machined for a precise fit on the CBR 1000 RR-R SC82 rear axle — no play, no compromise on concentricity\u003c\/li\u003e\n\u003cli\u003eHard anodised finish delivers corrosion resistance across a full range of colours, keeping the nut looking sharp across seasons of use\u003c\/li\u003e\n\u003cli\u003eThread M24x1.5, outer diameter 39 mm, hex diameter 30 mm, height 17.5 mm — every dimension engineered to OEM interface standards\u003c\/li\u003e\n\u003cli\u003eDeveloped equally for road riding and circuit use, making it an ideal upgrade for owners who mix weekend commutes with track sessions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Performance\u003c\/h2\u003e\u003cp\u003eLighTech produces this axle nut using multi-axis CNC machining, which guarantees consistent geometry across every unit. Ergal 7075 is not standard alloy — it is the same material family used in motorsport suspension and aerospace fasteners, with a tensile strength far above conventional 6061 aluminium. The hard anodising process bonds with the aluminium surface rather than sitting on top of it, giving the finish genuine durability and making it resistant to the grime, chain lube overspray and brake dust that accumulate in the rear wheel area. The result is a fastener that looks like a race component because it is engineered as one.\u003c\/p\u003e\u003ch2\u003eRoad and Track Use\u003c\/h2\u003e\u003cp\u003eThe CBR 1000 RR-R SC82 is a machine that asks a great deal of its components. At track pace the rear axle nut is subject to sustained lateral load from hard cornering as well as the shock loading that accompanies aggressive drive off slow corners. LighTech's 140 Nm torque rating gives you a clear, safe installation specification and a meaningful safety margin above the typical service torque. On the road the anodised surface resists the washing effects of rain and road salt, so the nut retains both its function and its appearance over a full riding season.\u003c\/p\u003e\u003ch2\u003eColour Options\u003c\/h2\u003e\u003cp\u003eThe D003 axle nut is available in five anodised finishes, each with its own part number for straightforward ordering: black (D003NER), gold (D003ORO), red (D003ROS), silver (D003SIL), and cobalt blue (D003COB). Choose the finish that complements your CBR's livery or your existing LighTech chassis accessories.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eHonda CBR 1000 RR-R SC82 (2020–2026)\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eLighTech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eD003\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eErgal 7075 aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread\u003c\/td\u003e\n\u003ctd\u003eM24x1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Diameter\u003c\/td\u003e\n\u003ctd\u003e39 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e17.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHex Diameter\u003c\/td\u003e\n\u003ctd\u003e30 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Torque\u003c\/td\u003e\n\u003ctd\u003e140 Nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eHard anodised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eHonda CBR 1000 RR-R SC82 (2020–2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"LighTech","offers":[{"title":"Black","offer_id":53167488106762,"sku":"D003NER","price":25.49,"currency_code":"EUR","in_stock":true},{"title":"Blue","offer_id":53167488139530,"sku":"D003COB","price":25.49,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":53167488172298,"sku":"D003ROS","price":25.49,"currency_code":"EUR","in_stock":true},{"title":"Gold","offer_id":53167488205066,"sku":"D003ORO","price":25.49,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":53167488237834,"sku":"D003SIL","price":25.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/D003NER_c6f1fe89-c3d1-4206-b1a1-eec5bd5d3a3d.png?v=1780798692"},{"product_id":"lightech-rear-axle-nut-kawasaki-zx-10-r-rr-d003","title":"LighTech Rear Axle Nut Kawasaki ZX-10 R\/RR (2011-2026) D003 - Anodised Aluminium","description":"\u003cp\u003eWhen every gram and every second counts on track, the LighTech rear axle nut D003 delivers the precision engineering that serious ZX-10 R and ZX-10 RR riders demand. Machined from aerospace-grade Ergal 7075 aluminium and finished with a hard anodised coating, this is the kind of detail-level upgrade that separates a properly prepared race machine from a standard road bike.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eErgal 7075 aluminium construction: the same high-strength alloy used in aerospace applications, offering exceptional rigidity at a fraction of the weight of a standard steel nut\u003c\/li\u003e\n\u003cli\u003eCNC-machined to exacting tolerances for a perfect fit on the ZX-10 R\/RR rear axle — no slop, no compromise\u003c\/li\u003e\n\u003cli\u003eHard anodised surface finish provides corrosion resistance and a clean racing aesthetic that holds up under track conditions\u003c\/li\u003e\n\u003cli\u003eRated to a maximum tightening torque of 140 Nm, meeting the demands of aggressive track and road use alike\u003c\/li\u003e\n\u003cli\u003eAvailable in five anodised colours — black (D003NER), blue (D003COB), red (D003ROS), gold (D003ORO) and silver (D003SIL) — to match or contrast your ZX-10's livery\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePerformance Engineering on the Detail That Matters\u003c\/h2\u003e\u003cp\u003eLighTech has built its reputation supplying parts to professional race teams, and the D003 rear axle nut reflects that philosophy. The M24x1.5 thread pitch is machined to the same standard as the original equipment, ensuring the nut seats correctly and holds its torque setting even under the sustained vibration of a hard track session. The 39 mm outer diameter and 30 mm hex size are dimensioned for use with a standard race-spec torque wrench, while the 17.5 mm height keeps the profile low and unobtrusive beneath the swingarm.\u003c\/p\u003e\u003ch2\u003eRoad and Track Versatility\u003c\/h2\u003e\u003cp\u003eWhile the D003 is engineered with trackday and club racing use in mind, it is equally at home on a road-registered ZX-10 R. The anodised finish shrugs off road grime and brake dust, and the Ergal 7075 alloy does not corrode in wet conditions. Whether you are rebuilding the rear end between track days or refreshing worn hardware on a street machine, this axle nut is a straightforward upgrade over the factory item.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eKawasaki ZX-10 R (2011–2026)\u003c\/li\u003e\n\u003cli\u003eKawasaki ZX-10 RR (2011–2026)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eD003\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eErgal 7075 aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread\u003c\/td\u003e\n\u003ctd\u003eM24x1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter diameter\u003c\/td\u003e\n\u003ctd\u003e39 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e17.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHex diameter\u003c\/td\u003e\n\u003ctd\u003e30 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum tightening torque\u003c\/td\u003e\n\u003ctd\u003e140 Nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurface finish\u003c\/td\u003e\n\u003ctd\u003eHard anodised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"LighTech","offers":[{"title":"Black","offer_id":53167488565514,"sku":"D003NER","price":25.49,"currency_code":"EUR","in_stock":true},{"title":"Blue","offer_id":53167488598282,"sku":"D003COB","price":25.49,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":53167488631050,"sku":"D003ROS","price":25.49,"currency_code":"EUR","in_stock":true},{"title":"Gold","offer_id":53167488663818,"sku":"D003ORO","price":25.49,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":53167488696586,"sku":"D003SIL","price":25.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/D003NER_22995618-3d07-478c-9e84-f1ec966edaa4.png?v=1780798696"},{"product_id":"lightech-rear-wheel-nut-triumph-street-triple-765-s-r-rs-moto2-d004","title":"LighTech Rear Wheel Nut for Triumph Street Triple 765 S \/ R \/ RS \/ Moto2 (2017-2026) D004","description":"\u003cp\u003eWhen every gram counts and precision fit matters from the first ride to the hundredth track day, the LighTech rear wheel nut for the Triumph Street Triple 765 S, R, RS and Moto2 (2017–2026) delivers exactly where it should. Machined from aerospace-grade Ergal 7075 aluminium, it threads into place with the kind of confidence that only CNC-precision engineering can provide — a part that feels as right at home on a Sunday road ride as it does in a pit lane paddock.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eErgal 7075 aluminium construction — the same aerospace alloy used where strength-to-weight ratios are non-negotiable, giving you a nut that sheds mass without sacrificing integrity\u003c\/li\u003e\n\u003cli\u003eCNC-machined to exact tolerances for a perfect, rattle-free fit on all Triumph Street Triple 765 variants from 2017 onwards\u003c\/li\u003e\n\u003cli\u003eHard anodised surface finish provides genuine corrosion resistance and keeps the part looking race-ready through all weather conditions\u003c\/li\u003e\n\u003cli\u003eThread specification M18x1.5 with a maximum tightening torque of 120 Nm — engineered to stay precisely where you put it\u003c\/li\u003e\n\u003cli\u003eAvailable in five anodised colours so you can match or contrast your Street Triple's livery with a finishing touch that shows in the details\u003c\/li\u003e\n\u003cli\u003eSuitable for road use and track days alike — a bolt-on upgrade that needs no modification and no compromise\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEngineering Detail\u003c\/h2\u003e\u003cp\u003eThe D004 sits where most riders never look twice, yet it is one of those components where a poor fit or excessive weight compounds over thousands of miles. LighTech's engineers have kept the outer diameter to 29 mm and the height to 14 mm, producing a compact profile that clears standard and aftermarket swingarm hardware without issue. The 22 mm hex head accepts a standard socket, making installation and removal straightforward whether you are changing a tyre in the van or working methodically in your garage before a track weekend. At a maximum torque rating of 120 Nm the nut handles everything the Street Triple drivetrain asks of it, session after session.\u003c\/p\u003e\u003ch2\u003eColour Options\u003c\/h2\u003e\u003cp\u003eThe D004 is available in five hard-anodised finishes, each with its own part suffix for accurate ordering. Black (D004NER) is the understated choice that suits virtually any Street Triple colour scheme. Gold (D004ORO) references classic race-bike hardware and pairs naturally with darker bodywork. Red (D004ROS) adds a vivid accent that holds up well against the triple's aggressive stance. Silver (D004SIL) keeps things clean and contemporary. Cobalt (D004COB) offers a deep blue tone for riders running a blue-themed build.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eTriumph Street Triple 765 S (2017–2026)\u003c\/li\u003e\n\u003cli\u003eTriumph Street Triple 765 R (2017–2026)\u003c\/li\u003e\n\u003cli\u003eTriumph Street Triple 765 RS (2017–2026)\u003c\/li\u003e\n\u003cli\u003eTriumph Street Triple 765 Moto2 Edition (2017–2026)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eD004\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread\u003c\/td\u003e\n\u003ctd\u003eM18x1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter diameter\u003c\/td\u003e\n\u003ctd\u003e29 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e14 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHex diameter\u003c\/td\u003e\n\u003ctd\u003e22 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum tightening torque\u003c\/td\u003e\n\u003ctd\u003e120 Nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eErgal 7075 aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurface finish\u003c\/td\u003e\n\u003ctd\u003eHard anodised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"LighTech","offers":[{"title":"Black","offer_id":53167489319178,"sku":"D004NER","price":23.67,"currency_code":"EUR","in_stock":true},{"title":"Blue","offer_id":53167489351946,"sku":"D004COB","price":23.67,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":53167489384714,"sku":"D004ROS","price":23.67,"currency_code":"EUR","in_stock":true},{"title":"Gold","offer_id":53167489417482,"sku":"D004ORO","price":23.67,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":53167489450250,"sku":"D004SIL","price":23.67,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/D004NER_b930ab30-1ae8-47d3-a18f-a42e54f5106e.png?v=1780798707"},{"product_id":"lightech-rear-axle-nut-yamaha-yzf-r7-d003","title":"LighTech Rear Axle Nut Yamaha YZF-R7 (2021-2026) D003 - Anodised Ergal 7075","description":"\u003cp\u003eSecuring your rear axle to the correct torque specification is a non-negotiable safety step, and the LighTech D003 rear axle nut gives you the confidence that the component doing that job is as engineered and reliable as the bike beneath you. Machined from aerospace-grade Ergal 7075 aluminium and rated to a maximum torque of 140 Nm, it is built specifically for the Yamaha YZF-R7 (2021–2026) to deliver a precise, secure fit on every installation — whether you are heading to the track or setting off for a weekend road ride.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eErgal 7075 aerospace aluminium construction: exceptional tensile strength combined with a significant weight saving over a standard steel nut\u003c\/li\u003e\n\u003cli\u003eCNC precision machining: each nut is turned to exact tolerances, guaranteeing a flush, rattle-free fit on the M24x1.5 rear axle thread\u003c\/li\u003e\n\u003cli\u003eAnodised finish: the hard-anodised surface resists corrosion, oxidation and track-day heat cycles, keeping its appearance over thousands of kilometres\u003c\/li\u003e\n\u003cli\u003eMaximum tightening torque of 140 Nm: a clearly rated safety ceiling that lets you torque to spec with full confidence\u003c\/li\u003e\n\u003cli\u003eDual-purpose design: equally at home on track days and public roads, combining motorsport precision with everyday practicality\u003c\/li\u003e\n\u003cli\u003eAvailable in five anodised colours — black (D003NER), gold (D003ORO), red (D003ROS), silver (D003SIL) and cobalt (D003COB) — to complement your R7's livery\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEngineering and Build Quality\u003c\/h2\u003e\u003cp\u003eLighTech developed the D003 using Ergal 7075, the same high-strength aluminium alloy series used in aircraft structural components. The material's superior strength-to-weight ratio means you lose mass without sacrificing the integrity a safety-critical fastener demands. The hexagon drive diameter of 30 mm is dimensioned for standard axle spanners, so fitment requires no special tooling beyond what any paddock or garage will carry.\u003c\/p\u003e\u003cp\u003eThe anodised surface treatment is not merely cosmetic. Hard anodising converts the outer layer of the aluminium into a ceramic-like oxide that is significantly harder than the bare alloy, protecting the nut against the stone chips, brake dust and road chemicals that attack exposed components. The result is a fastener that looks as good after a season of use as it did out of the box.\u003c\/p\u003e\u003ch2\u003eRoad and Track Use\u003c\/h2\u003e\u003cp\u003eOn track, every gramme saved at the unsprung rear wheel improves response and reduces rotational inertia — a marginal but measurable gain that LighTech's OEM-replacement philosophy is designed to deliver. The 140 Nm torque rating provides a clear, published maximum so mechanics and riders can work to the correct specification without ambiguity, making this nut a responsible choice as well as a performance one. On the road, the corrosion-resistant anodised finish means it handles daily exposure without the rust or surface degradation that affects lesser aftermarket hardware.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eYamaha YZF-R7 (2021–2026)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThread: M24x1.5 — verify your axle specification before ordering if the bike has been previously modified.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eD003 (D003NER \/ D003ORO \/ D003ROS \/ D003SIL \/ D003COB depending on colour)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread\u003c\/th\u003e\n\u003ctd\u003eM24x1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOuter Diameter\u003c\/th\u003e\n\u003ctd\u003e39 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e17.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHexagon Drive Diameter\u003c\/th\u003e\n\u003ctd\u003e30 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Tightening Torque\u003c\/th\u003e\n\u003ctd\u003e140 Nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eErgal 7075 aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSurface Treatment\u003c\/th\u003e\n\u003ctd\u003eHard anodised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment\u003c\/th\u003e\n\u003ctd\u003eYamaha YZF-R7 (2021–2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"LighTech","offers":[{"title":"Black","offer_id":53167490269450,"sku":"D003NER","price":25.49,"currency_code":"EUR","in_stock":true},{"title":"Blue","offer_id":53167490302218,"sku":"D003COB","price":25.49,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":53167490334986,"sku":"D003ROS","price":25.49,"currency_code":"EUR","in_stock":true},{"title":"Gold","offer_id":53167490367754,"sku":"D003ORO","price":25.49,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":53167490400522,"sku":"D003SIL","price":25.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/D003NER_3e83c71a-922e-4a1b-a0fc-420a25ee3ebc.png?v=1780798714"},{"product_id":"lightech-aluminium-frame-bolt-kit-aprilia-rs-660-frmap001","title":"LighTech Aluminium Frame Bolt Kit Aprilia RS 660 (2020-2026) FRMAP001","description":"\u003cp\u003eEvery gram saved at the frame is a gain earned on track. The LighTech FRMAP001 frame bolt kit replaces the heavy OEM hardware on the Aprilia RS 660 with precision CNC-machined Ergal 7075 aluminium bolts — the same racing-derived material choice found on World Superbike paddock machines, now available for your RS 660 in five anodised colours.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCNC-machined from solid Ergal 7075 aluminium billet for maximum strength-to-weight ratio and a direct reduction in unsprung and chassis mass versus stock steel bolts\u003c\/li\u003e\n\u003cli\u003eHard anodised finish delivers long-term corrosion resistance and colour-fast appearance through track sessions and road miles alike\u003c\/li\u003e\n\u003cli\u003eEngineered as a direct replacement for OEM frame bolts — no modifications, no guesswork, no chasing threads\u003c\/li\u003e\n\u003cli\u003eAvailable in five anodised colours (black, red, gold, silver, blue) to complement your RS 660's livery or personalise a track-day build\u003c\/li\u003e\n\u003cli\u003eComplete set supplied, covering all designated frame bolt positions on the RS 660\u003c\/li\u003e\n\u003cli\u003eMade in Italy by LighTech, a specialist in motorsport-grade aluminium fasteners and accessories\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eRacing Credentials and Build Quality\u003c\/h2\u003e\u003cp\u003eErgal 7075 is the aluminium alloy of choice in competition environments precisely because it offers tensile strength approaching that of mild steel at a fraction of the weight. LighTech machines each bolt from solid billet — not cast, not forged — so the grain structure is uninterrupted and tolerances are held tightly throughout the thread and head geometry. The result is a fastener that torques correctly to OEM specification, seats cleanly in the frame, and stays put under the vibration loads of hard track use.\u003c\/p\u003e\u003cp\u003eThe anodising process bonds an oxide layer into the surface of the aluminium rather than simply coating it, which means the colour does not flake or chip under mechanical stress. Each colour variant carries its own part number suffix for straightforward re-ordering: FRMAP001NER (black), FRMAP001ROS (red), FRMAP001ORO (gold), FRMAP001SIL (silver), FRMAP001COB (blue).\u003c\/p\u003e\u003ch2\u003eRoad and Track Application\u003c\/h2\u003e\u003cp\u003eWhether you are stripping weight for a club-racing RS 660, building a dedicated track-day machine, or simply upgrading the aesthetics of a road bike with components that earn their place through engineering rather than appearance alone, the FRMAP001 kit delivers measurable and visible improvement. Fitting is straightforward for anyone comfortable with basic frame maintenance — remove, replace, torque.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis kit is designed and manufactured specifically for the Aprilia RS 660 across all model years 2020 to 2026. It is not a universal fastener set; every bolt in the kit corresponds to an OEM frame position on this model.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart number: FRMAP001\u003c\/li\u003e\n\u003cli\u003eBrand: LighTech — Made in Italy\u003c\/li\u003e\n\u003cli\u003eMaterial: Ergal 7075 aluminium, CNC-machined from solid billet\u003c\/li\u003e\n\u003cli\u003eSurface finish: Hard anodised — colour-fast and corrosion-resistant\u003c\/li\u003e\n\u003cli\u003eApplication: Complete frame bolt set\u003c\/li\u003e\n\u003cli\u003eFitment: Aprilia RS 660, model years 2020–2026\u003c\/li\u003e\n\u003cli\u003eAvailable colour part numbers: FRMAP001NER (black), FRMAP001ROS (red), FRMAP001ORO (gold), FRMAP001SIL (silver), FRMAP001COB (blue)\u003c\/li\u003e\n\u003cli\u003eScope of delivery: Complete set of frame bolts\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"Black","offer_id":53167999090954,"sku":"FRMAP001NER","price":41.55,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":53167999123722,"sku":"FRMAP001NER","price":41.55,"currency_code":"EUR","in_stock":true},{"title":"Gold","offer_id":53167999156490,"sku":"FRMAP001ORO","price":41.55,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":53167999189258,"sku":"FRMAP001SIL","price":41.55,"currency_code":"EUR","in_stock":true},{"title":"Blue","offer_id":53167999222026,"sku":"FRMAP001COB","price":41.55,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ENGAP001NER_045432b2-03f6-458f-acbd-d3df24315a00.png?v=1780803501"},{"product_id":"lightech-aluminium-frame-bolt-kit-aprilia-rsv4-rsv4-1100-factory-r-rr","title":"LighTech Aluminium Frame Bolt Kit Aprilia RSV4 \/ RSV4 1100 Factory \/ R \/ RR \/ RF (2009–2020) 9A4T","description":"\u003cp\u003eWhen every component on your Aprilia RSV4 is held to the same standard as the engine beneath it, the frame bolts should be no exception. The LighTech 9A4T frame bolt kit replaces all key frame fasteners with 22 precision-machined Ergal 7075 aluminium bolts — a material chosen by race teams for its exceptional strength-to-weight ratio and proven durability under the repeated stress loads of track use.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eErgal 7075 aluminium construction delivers aerospace-grade tensile strength while stripping meaningful weight versus standard steel fasteners\u003c\/li\u003e\n\u003cli\u003eCNC-machined to exacting tolerances, ensuring a precise, rattle-free fit at every frame mounting point covered by the kit\u003c\/li\u003e\n\u003cli\u003eHard anodised surface finish provides genuine corrosion resistance and retains its colour under UV exposure and repeated washing\u003c\/li\u003e\n\u003cli\u003eComplete 22-piece set covers all relevant frame fixing points — no mixing with inferior stock hardware required\u003c\/li\u003e\n\u003cli\u003eAvailable in five anodised colours with individual part numbers, letting you match or contrast your RSV4's livery with full confidence in material integrity\u003c\/li\u003e\n\u003cli\u003eEngineered for both trackday preparation and road use where weight reduction and visual quality matter equally\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuilt for the RSV4 Platform\u003c\/h2\u003e\u003cp\u003eLighTech designed the 9A4T specifically around the Aprilia RSV4 and RSV4 1100 frame architecture. Each bolt in the 22-piece set is dimensioned to replace an OEM fastener directly, so fitment is straightforward and no modification to the frame is required. The anodised finish is not a cosmetic coating applied over raw metal — it is an electrochemical conversion of the surface aluminium itself, which means it cannot flake or peel and adds a meaningful layer of protection against the corrosive effects of road grime, chain lubricant, and brake dust.\u003c\/p\u003e\u003ch2\u003eColour Options and Part Numbers\u003c\/h2\u003e\u003cp\u003eEach colour variant carries its own LighTech part number, confirming that the finish is a production specification rather than an afterthought. The five available anodised colours are:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBlack — 9A4TNER\u003c\/li\u003e\n\u003cli\u003eGold — 9A4TORO\u003c\/li\u003e\n\u003cli\u003eRed — 9A4TROS\u003c\/li\u003e\n\u003cli\u003eSilver — 9A4TSIL\u003c\/li\u003e\n\u003cli\u003eCobalt — 9A4TCOB\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis kit is confirmed to fit the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAprilia RSV4 \/ RSV4 1100 Factory (2009–2020)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 R \/ RR \/ RF (2009–2020)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eLighTech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003e9A4T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eErgal 7075 aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eHard anodised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturing process\u003c\/td\u003e\n\u003ctd\u003eCNC-machined\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePieces in set\u003c\/td\u003e\n\u003ctd\u003e22 frame bolts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailable colours\u003c\/td\u003e\n\u003ctd\u003eBlack (9A4TNER), Gold (9A4TORO), Red (9A4TROS), Silver (9A4TSIL), Cobalt (9A4TCOB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eAprilia RSV4 \/ RSV4 1100 Factory \/ R \/ RR \/ RF (2009–2020)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"LighTech","offers":[{"title":"Black","offer_id":53168214769930,"sku":"9A4TNER","price":80.43,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":53168214802698,"sku":"9A4TROS","price":80.43,"currency_code":"EUR","in_stock":true},{"title":"Gold","offer_id":53168214835466,"sku":"9A4TORO","price":80.43,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":53168214868234,"sku":"9A4TSIL","price":80.43,"currency_code":"EUR","in_stock":true},{"title":"Blue","offer_id":53168214901002,"sku":"9A4TCOB","price":80.43,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ENGAP001NER_dfa3e618-d7f0-4296-a35a-eb80c654658a.png?v=1780808482"},{"product_id":"lightech-aluminium-frame-bolt-kit-bmw-s1000rr-k46-0b1t","title":"LighTech Aluminium Frame Bolt Kit BMW S1000RR K46 (2009–2014) 0B1T","description":"\u003cp\u003eFew finishing touches speak as fluently to racing heritage as a set of precision-machined Ergal 7075 frame bolts. LighTech's 23-piece aluminium frame bolt kit for the BMW S1000RR K46 (2009–2014) replaces every relevant factory fastener with a CNC-crafted component that carries the unmistakable aesthetic of the pit lane — available in five anodised colours to complement any livery.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFull 23-piece set covers all relevant frame mounting points on the S1000RR K46 — no additional hardware required.\u003c\/li\u003e\n\u003cli\u003eMachined from Ergal 7075 aluminium, an aerospace-grade alloy chosen for its exceptional strength-to-weight ratio.\u003c\/li\u003e\n\u003cli\u003eCNC manufacturing ensures precise tolerances and flush, factory-quality fitment throughout.\u003c\/li\u003e\n\u003cli\u003eHard anodised finish delivers lasting corrosion resistance while locking in vibrant colour that holds up on track and road alike.\u003c\/li\u003e\n\u003cli\u003eAvailable in black (0B1TNER), gold (0B1TORO), red (0B1TROS), silver (0B1TSIL) and cobalt (0B1TCOB) — each a distinct visual statement.\u003c\/li\u003e\n\u003cli\u003eRacing-inspired design born from LighTech's decades of experience supplying WorldSBK and club-racing paddocks.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign, Finish and Heritage\u003c\/h2\u003e\u003cp\u003eLighTech has long been synonymous with the kind of detail-obsessed craftsmanship that separates a properly finished superbike from a stock one. The Ergal 7075 alloy used here is no off-the-shelf choice: it is the same material specification favoured in motorsport applications where weight matters and failure is not an option. Each bolt is turned and threaded on CNC machinery, then hard anodised to produce a surface that resists the heat, oil and road grime a high-performance motorcycle generates in everyday use.\u003c\/p\u003e\u003cp\u003eThe colour range — black, gold, red, silver and cobalt — allows owners of the BMW S1000RR K46 to match the bolt set to a factory paint scheme, a race replica livery, or a custom build theme. Whether the bike lives on track days at the Nürburgring or earns its keep on weekend mountain roads, the LighTech kit adds a considered, cohesive look that factory plastics alone cannot deliver.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis kit is designed and verified specifically for the BMW S1000RR K46 spanning model years 2009 through 2014. All 23 bolts correspond to the frame fastener positions on that generation of the S1000RR; no drilling, modification or additional hardware is required for installation.\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBMW S1000RR K46 (2009, 2010, 2011, 2012, 2013, 2014)\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eColour References\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBlack — part number 0B1TNER\u003c\/li\u003e\n\u003cli\u003eGold — part number 0B1TORO\u003c\/li\u003e\n\u003cli\u003eRed — part number 0B1TROS\u003c\/li\u003e\n\u003cli\u003eSilver — part number 0B1TSIL\u003c\/li\u003e\n\u003cli\u003eCobalt — part number 0B1TCOB\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eLighTech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003e0B1T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eErgal 7075 aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eHard anodised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturing\u003c\/td\u003e\n\u003ctd\u003eCNC machined\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003e23 frame bolts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eBMW S1000RR K46 (2009–2014)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailable colours\u003c\/td\u003e\n\u003ctd\u003eBlack, Gold, Red, Silver, Cobalt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"LighTech","offers":[{"title":"Black","offer_id":53168215621898,"sku":"0B1TNER","price":62.76,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":53168215654666,"sku":"0B1TROS","price":62.76,"currency_code":"EUR","in_stock":true},{"title":"Gold","offer_id":53168215687434,"sku":"0B1TORO","price":62.76,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":53168215720202,"sku":"0B1TSIL","price":62.76,"currency_code":"EUR","in_stock":true},{"title":"Cobalt","offer_id":53168215752970,"sku":"0B1TCOB","price":62.76,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ENGAP001NER_746314b9-23db-4b73-86c4-967a603500a5.png?v=1780808482"},{"product_id":"lightech-aluminium-frame-bolt-kit-bmw-s1000rr-k46-5b1t","title":"LighTech Aluminium Frame Bolt Kit BMW S1000RR K46 (2015-2018) 5B1T","description":"\u003cp\u003eWhen every gram and every lap counts, the LighTech aluminium frame bolt kit 5B1T gives your BMW S1000RR K46 a genuine race-derived edge — shedding weight at every fastener point while adding the precise, uncompromising finish that separates track-focused builds from stock machines.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eErgal 7075 aluminium construction: up to 60% lighter than steel equivalents, yet retains the high tensile strength demanded by track and circuit use.\u003c\/li\u003e\n\u003cli\u003eCNC-machined to exact tolerances for a perfect fit at every frame mounting point on the S1000RR K46 — no adjustment, no compromise.\u003c\/li\u003e\n\u003cli\u003eHard anodised surface finish provides genuine corrosion resistance and locks in the racing colour of your choice for the long term.\u003c\/li\u003e\n\u003cli\u003eComplete 19-piece kit covers all relevant frame bolt positions in a single purchase — no sourcing individual fasteners.\u003c\/li\u003e\n\u003cli\u003eAvailable in five anodised colours to coordinate with your livery: black, gold, red, silver, and cobalt blue.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eRace Performance Through Weight Reduction\u003c\/h2\u003e\u003cp\u003eLighTech developed this frame bolt kit with the demands of circuit riding firmly in mind. Ergal 7075 is an aerospace-grade aluminium alloy chosen for its exceptional strength-to-weight ratio — the same class of material used in high-performance racing components across MotoGP-derived machinery. Replacing the factory steel bolts across 19 frame positions delivers a cumulative weight reduction that contributes meaningfully to overall unsprung and chassis mass, with zero sacrifice in structural integrity.\u003c\/p\u003e\u003ch2\u003ePrecision Engineering and Finish Quality\u003c\/h2\u003e\u003cp\u003eEach bolt is CNC-machined from solid Ergal 7075 billet, ensuring dimensional accuracy that matches OEM fitment requirements exactly. The hard anodised finish goes beyond aesthetics: it creates a surface layer that resists wear, corrosion, and track-environment contamination. Whether your S1000RR runs in track-day trim or competes in club racing, the finish holds its colour and integrity season after season.\u003c\/p\u003e\u003ch2\u003eColour Options\u003c\/h2\u003e\u003cp\u003eThe 5B1T kit is offered in five anodised finishes to suit any S1000RR build. Each colour variant carries its own part number for straightforward ordering:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBlack (5B1TNER)\u003c\/li\u003e\n\u003cli\u003eGold (5B1TORO)\u003c\/li\u003e\n\u003cli\u003eRed (5B1TROS)\u003c\/li\u003e\n\u003cli\u003eSilver (5B1TSIL)\u003c\/li\u003e\n\u003cli\u003eCobalt (5B1TCOB)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis kit is designed and manufactured specifically for the BMW S1000RR K46 produced between 2015 and 2018. The 19 bolts address all relevant frame fastener positions for this generation, making fitment straightforward for any competent workshop or experienced home mechanic. Always verify your build year before ordering.\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBMW S1000RR K46 (2015–2018)\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eLighTech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e5B1T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eErgal 7075 aluminium alloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurface Finish\u003c\/td\u003e\n\u003ctd\u003eHard anodised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturing Method\u003c\/td\u003e\n\u003ctd\u003eCNC-machined\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003e19 frame bolts per kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight Saving\u003c\/td\u003e\n\u003ctd\u003eUp to 60% lighter than steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eBMW S1000RR K46 (2015–2018)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailable Colours\u003c\/td\u003e\n\u003ctd\u003eBlack, Gold, Red, Silver, Cobalt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"LighTech","offers":[{"title":"Black","offer_id":53168217653514,"sku":"5B1TNER","price":71.43,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":53168217686282,"sku":"5B1TROS","price":71.43,"currency_code":"EUR","in_stock":true},{"title":"Gold","offer_id":53168217719050,"sku":"5B1TORO","price":71.43,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":53168217751818,"sku":"5B1TSIL","price":71.43,"currency_code":"EUR","in_stock":true},{"title":"Cobalt Blue","offer_id":53168217784586,"sku":"5B1TCOB","price":71.43,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ENGAP001NER_db7e582c-0ebf-4395-8489-faec4b3da802.png?v=1780808482"},{"product_id":"lightech-aluminium-frame-bolt-kit-bmw-s1000rr-k67-9b1t","title":"LighTech Aluminium Frame Bolt Kit BMW S1000RR K67 (2019-2022) 9B1T","description":"\u003cp\u003eEvery gram shed at the track is a gram working against you on the clock. LighTech's aluminium frame bolt kit for the BMW S1000RR K67 (2019–2022) replaces the heavy OEM steel hardware with precision CNC-machined Ergal 7075 fasteners — slashing unsprung and chassis mass while giving your S1000RR the purposeful, race-ready aesthetic that belongs on a Superbike, not just a showroom floor.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eErgal 7075 aluminium construction saves up to 60% weight over equivalent steel bolts, contributing to a leaner overall chassis for track and road use alike.\u003c\/li\u003e\n\u003cli\u003eCNC-machined to exacting tolerances for a perfect, rattle-free fit at every frame mounting point on the K67 S1000RR.\u003c\/li\u003e\n\u003cli\u003eHard anodised finish provides long-term corrosion resistance and a premium racing appearance in your choice of five colours.\u003c\/li\u003e\n\u003cli\u003eComplete 14-piece kit covers all relevant frame fastener positions — no mixing with stock hardware required.\u003c\/li\u003e\n\u003cli\u003eAvailable in black (9B1TNER), gold (9B1TORO), red (9B1TROS), silver (9B1TSIL) and cobalt (9B1TCOB) to match any livery or colour scheme.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuilt for Racing Performance\u003c\/h2\u003e\u003cp\u003eErgal 7075 is the alloy of choice in motorsport precisely because it delivers an exceptional strength-to-weight ratio — strong enough to handle the dynamic loads that a Superbike generates under hard acceleration and braking, yet light enough that choosing it over steel actually moves the needle on overall bike weight. LighTech machine each bolt from billet on multi-axis CNC centres, producing threads and seating surfaces that meet the tight tolerances demanded by professional race preparation. Whether you are preparing a K67 S1000RR for a full race season or sharpening a track-day weapon, this kit removes compromise from one area where the OEM specification was never designed with pure performance in mind.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eBMW S1000RR K67 (2019, 2020, 2021, 2022)\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eLighTech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003e9B1T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eErgal 7075 aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eHard anodised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003e14-piece set\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight saving vs steel\u003c\/td\u003e\n\u003ctd\u003eUp to 60%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eBMW S1000RR K67 (2019–2022)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailable colour codes\u003c\/td\u003e\n\u003ctd\u003e9B1TNER (black), 9B1TORO (gold), 9B1TROS (red), 9B1TSIL (silver), 9B1TCOB (cobalt)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"LighTech","offers":[{"title":"Black","offer_id":53168218243338,"sku":"9B1TNER","price":62.23,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":53168218276106,"sku":"9B1TROS","price":62.23,"currency_code":"EUR","in_stock":true},{"title":"Gold","offer_id":53168218308874,"sku":"9B1TORO","price":62.23,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":53168218341642,"sku":"9B1TSIL","price":62.23,"currency_code":"EUR","in_stock":true},{"title":"Cobalt Blue","offer_id":53168218374410,"sku":"9B1TCOB","price":62.23,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ENGAP001NER_6e1136b2-1f83-4874-abea-3174251b6d8f.png?v=1780808482"},{"product_id":"lightech-aluminium-frame-bolt-kit-kawasaki-zx-10r-rr-frmka001","title":"LighTech Aluminium Frame Bolt Kit Kawasaki ZX-10R\/RR (2021-2026) FRMKA001","description":"\u003cp\u003eMachined from Ergal 7075 — the same aerospace-grade aluminium alloy found in competition components — the LighTech frame bolt kit for the Kawasaki ZX-10R and ZX-10RR represents a genuine upgrade in both material quality and visual presence. Every bolt in this 23-piece set is precision CNC-machined to exact tolerances, replacing the factory steel hardware with components that weigh up to 60% less without any compromise in structural integrity.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eErgal 7075 aluminium construction: up to 60% lighter than standard steel frame bolts, with exceptional tensile strength that meets the demands of track and road alike.\u003c\/li\u003e\n\u003cli\u003eCNC-machined to precise tolerances for a perfect fitment at every frame mounting point on the ZX-10R and ZX-10RR.\u003c\/li\u003e\n\u003cli\u003eAnodised finish provides robust corrosion resistance and a clean, race-ready aesthetic — available in five distinct colours to suit your build.\u003c\/li\u003e\n\u003cli\u003eComplete 23-piece kit covering all relevant frame fastener positions, so nothing is left in standard steel.\u003c\/li\u003e\n\u003cli\u003eFive part-numbered colour variants allow exact reordering: Black (FRMKA001NER), Gold (FRMKA001ORO), Red (FRMKA001ROS), Silver (FRMKA001SIL), Cobalt (FRMKA001COB).\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eMaterial and Construction\u003c\/h2\u003e\u003cp\u003eErgal 7075 is not a generic aluminium — it is a high-strength alloy in the 7000 series, typically used in aerospace and high-performance motorsport applications where the weight-to-strength ratio is critical. LighTech's CNC machining process ensures that every thread profile and seating face meets the same dimensional accuracy as the original equipment fasteners, so installation requires no modification and no compromise on torque values.\u003c\/p\u003e\u003cp\u003eThe anodised surface treatment goes beyond cosmetics. It creates a hard oxide layer directly bonded to the aluminium, resisting corrosion from road salts, brake fluid splashes, and the thermal cycling that frame hardware experiences across a season of hard riding or track days.\u003c\/p\u003e\u003ch2\u003ePerformance and Track Use\u003c\/h2\u003e\u003cp\u003eOn a motorcycle as focused as the Kawasaki ZX-10R or ZX-10RR, marginal weight reductions across multiple components accumulate into a meaningful difference in unsprung and sprung mass. Replacing every frame bolt with Ergal 7075 hardware is the kind of detail that separates a properly prepared track machine from a stock one. For riders who invest in quality at every touch point, this kit is a logical and visible upgrade that holds its quality over years of use.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eKawasaki ZX-10R (2021–2026)\u003c\/li\u003e\n\u003cli\u003eKawasaki ZX-10RR (2021–2026)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eLighTech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eFRMKA001\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eErgal 7075 aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eAnodised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003e23 pieces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight saving\u003c\/td\u003e\n\u003ctd\u003eUp to 60% vs. standard steel bolts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eKawasaki ZX-10R \/ ZX-10RR 2021–2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailable colours\u003c\/td\u003e\n\u003ctd\u003eBlack, Red, Gold, Silver, Cobalt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"LighTech","offers":[{"title":"Black","offer_id":53168220471562,"sku":"FRMKA001NER","price":48.83,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":53168220504330,"sku":"FRMKA001ROS","price":48.83,"currency_code":"EUR","in_stock":true},{"title":"Gold","offer_id":53168220537098,"sku":"FRMKA001ORO","price":48.83,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":53168220569866,"sku":"FRMKA001SIL","price":48.83,"currency_code":"EUR","in_stock":true},{"title":"Cobalt","offer_id":53168220602634,"sku":"FRMKA001COB","price":48.83,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ENGAP001NER_b6d4d477-75ba-44e2-8ab1-fec1fc807199.png?v=1780808483"},{"product_id":"lightech-aluminium-frame-bolt-kit-suzuki-gsx-r-1000-1x7t","title":"LighTech Aluminium Frame Bolt Kit Suzuki GSX-R 1000 (2017–2023) 1X7T","description":"\u003cp\u003eEvery detail on a well-prepared GSX-R 1000 earns its place, and the LighTech frame bolt kit for the 2017–2023 GSX-R 1000 is precisely that kind of detail. Machined from aerospace-grade Ergal 7075 aluminium and available in five anodised colours, this 29-piece set replaces the factory fasteners with hardware that is lighter, sharper-looking, and engineered to fit without fuss — whether you are prepping for a trackday or refining a road bike you spend all day on.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eErgal 7075 aluminium construction — the same alloy specification used in aerospace applications, delivering an exceptional strength-to-weight ratio across all 29 bolts\u003c\/li\u003e\n\u003cli\u003eCNC-machined for precision fitment — each bolt is cut to exact tolerances so installation is clean and torque-spec confident at every frame point\u003c\/li\u003e\n\u003cli\u003eHard anodised finish — protects against corrosion while giving the set a consistent, race-ready aesthetic that holds up under heat and weather\u003c\/li\u003e\n\u003cli\u003eComplete 29-piece set — covers all relevant frame bolt positions on the GSX-R 1000, eliminating the need to source individual fasteners\u003c\/li\u003e\n\u003cli\u003eFive colour options — black (1X7TNER), gold (1X7TORO), red (1X7TROS), silver (1X7TSIL), and cobalt (1X7TCOB) to match or contrast your livery\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Performance\u003c\/h2\u003e\u003cp\u003eLighTech developed this kit with one principle in mind: every gram you can remove from non-structural mass is a gram that improves the way your GSX-R 1000 moves and feels. Ergal 7075 is not simply marketing terminology — it is a heat-treatable aluminium alloy with tensile properties that place it comfortably above standard 6061 aluminium, making it a trusted material in both motorsport and aviation. The CNC-machining process ensures dimensional consistency across the entire 29-piece set, so you are not wrestling bolts into position or relying on thread-lock to compensate for loose tolerances.\u003c\/p\u003e\u003cp\u003eThe anodised surface treatment goes beyond cosmetics. It creates a hard oxide layer integral to the aluminium itself, resisting the corrosion, brake dust, and chain lubricant that accumulate around frame fasteners over a riding season. The result is hardware that looks as sharp after two years of use as it did out of the box.\u003c\/p\u003e\u003ch2\u003eTrack and Road Use\u003c\/h2\u003e\u003cp\u003eFor trackday regulars, the weight reduction across 29 bolts is a genuine, measurable improvement — particularly meaningful when combined with other lightweight components. For road riders, the appeal is equally clear: a factory GSX-R 1000 is a serious machine, and fitting a LighTech frame bolt kit is one of the most cost-effective ways to personalise and elevate it without compromising reliability. The secure, precision fit means you can ride all day without a second thought about the hardware beneath the fairing.\u003c\/p\u003e\u003ch2\u003eColour Options and Part Numbers\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBlack — 1X7TNER\u003c\/li\u003e\n\u003cli\u003eGold — 1X7TORO\u003c\/li\u003e\n\u003cli\u003eRed — 1X7TROS\u003c\/li\u003e\n\u003cli\u003eSilver — 1X7TSIL\u003c\/li\u003e\n\u003cli\u003eCobalt — 1X7TCOB\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eSuzuki GSX-R 1000 (2017–2023)\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eLighTech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003e1X7T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eErgal 7075 aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSurface Finish\u003c\/th\u003e\n\u003ctd\u003eAnodised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQuantity\u003c\/th\u003e\n\u003ctd\u003e29 pieces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturing Process\u003c\/th\u003e\n\u003ctd\u003eCNC-machined\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment\u003c\/th\u003e\n\u003ctd\u003eSuzuki GSX-R 1000 (2017–2023)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAvailable Colours\u003c\/th\u003e\n\u003ctd\u003eBlack, Gold, Red, Silver, Cobalt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"LighTech","offers":[{"title":"Black","offer_id":53168220897546,"sku":"1X7TNER","price":91.03,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":53168220930314,"sku":"1X7TROS","price":91.03,"currency_code":"EUR","in_stock":true},{"title":"Gold","offer_id":53168220963082,"sku":"1X7TORO","price":91.03,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":53168220995850,"sku":"1X7TSIL","price":91.03,"currency_code":"EUR","in_stock":true},{"title":"Blue","offer_id":53168221028618,"sku":"1X7TCOB","price":91.03,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ENGAP001NER_8104b4d4-6690-407b-a3ee-ec21a3fe0d7b.png?v=1780808483"},{"product_id":"lightech-aluminium-frame-bolt-kit-yamaha-yzf-r1-m-rn32-rn49-rn65-5y1t","title":"LighTech Aluminium Frame Bolt Kit Yamaha YZF-R1\/M RN32, RN49, RN65 (2015–2026) 5Y1T","description":"\u003cp\u003eSwapping standard fasteners for the LighTech Aluminium Frame Bolt Kit transforms an everyday maintenance task into a lasting upgrade you will appreciate on every ride. All 27 bolts are machined from aerospace-grade Ergal 7075 aluminium and anodised to resist corrosion, delivering a precise, rattle-free fit across every frame mounting point on the Yamaha YZF-R1 and YZF-R1M from 2015 to 2026.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFull 27-piece set covering all relevant frame fastening points — fit once and forget\u003c\/li\u003e\n\u003cli\u003eErgal 7075 aluminium construction: the same alloy trusted in aerospace applications, combining ultra-low weight with exceptional tensile strength\u003c\/li\u003e\n\u003cli\u003eCNC-machined to exacting tolerances for a perfect, stress-free installation with no chasing threads or forced fits\u003c\/li\u003e\n\u003cli\u003eAnodised finish provides durable corrosion resistance and a consistent, sport-inspired appearance across the frame\u003c\/li\u003e\n\u003cli\u003eAvailable in five anodised colours so the kit can be matched to your R1's livery or personal style with no compromise on quality\u003c\/li\u003e\n\u003cli\u003eTrackday-ready specification: racing-grade performance suitable for both road and circuit use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Performance\u003c\/h2\u003e\u003cp\u003eLighTech developed the 5Y1T kit with the performance rider in mind. Ergal 7075 is one of the strongest aluminium alloys available, offering a strength-to-weight ratio that no standard steel bolt can match at this mass. Each piece is CNC-milled from billet stock, ensuring consistent geometry and thread form throughout the set. The anodised surface layer bonds chemically to the aluminium rather than sitting on top, so the colour holds up through repeated wheel changes, trackday sessions, and all-season road miles without peeling or fading.\u003c\/p\u003e\u003ch2\u003eColour Options\u003c\/h2\u003e\u003cp\u003eThe kit is offered in five anodised finishes, each with its own LighTech part number for straightforward reordering:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBlack (5Y1TNER)\u003c\/li\u003e\n\u003cli\u003eGold (5Y1TORO)\u003c\/li\u003e\n\u003cli\u003eRed (5Y1TROS)\u003c\/li\u003e\n\u003cli\u003eSilver (5Y1TSIL)\u003c\/li\u003e\n\u003cli\u003eCobalt (5Y1TCOB)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis frame bolt kit is designed exclusively for the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eYamaha YZF-R1 — RN32, RN49, RN65 (2015–2026)\u003c\/li\u003e\n\u003cli\u003eYamaha YZF-R1M — RN32, RN49, RN65 (2015–2026)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe set covers all relevant frame attachment points as standard, requiring no modification to the chassis.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eLighTech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003e5Y1T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eErgal 7075 aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurface finish\u003c\/td\u003e\n\u003ctd\u003eAnodised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003e27 pieces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eYamaha YZF-R1 \/ YZF-R1M RN32, RN49, RN65 (2015–2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailable colours\u003c\/td\u003e\n\u003ctd\u003eBlack, Gold, Red, Silver, Cobalt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"LighTech","offers":[{"title":"Black","offer_id":53168222896394,"sku":"5Y1TNER","price":95.32,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":53168222929162,"sku":"5Y1TROS","price":95.32,"currency_code":"EUR","in_stock":true},{"title":"Gold","offer_id":53168222961930,"sku":"5Y1TORO","price":95.32,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":53168222994698,"sku":"5Y1TSIL","price":95.32,"currency_code":"EUR","in_stock":true},{"title":"Blue","offer_id":53168223027466,"sku":"5Y1TCOB","price":95.32,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ENGAP001NER_1ac95902-ef31-496b-9db9-772c571d8e85.png?v=1780808483"},{"product_id":"lightech-aluminium-frame-bolt-kit-yamaha-yzf-r6-rj15-8y6t","title":"LighTech Aluminium Frame Bolt Kit Yamaha YZF-R6 RJ15 (2008–2016) 8Y6T","description":"\u003cp\u003eFew finishing touches reveal a rider's commitment to their machine quite like a set of precision-machined frame bolts. The LighTech Aluminium Frame Bolt Kit for the Yamaha YZF-R6 RJ15 (2008–2016) draws on Italian racing craft and aerospace-grade materials to replace every relevant frame fastener with a component that looks as purposeful as it performs. This is the kind of detail that separates a race-prepared R6 from everything else in the paddock.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMachined from Ergal 7075 aluminium — the same aerospace alloy used in aviation structures — delivering up to 60% weight saving over equivalent steel fasteners without sacrificing structural integrity.\u003c\/li\u003e\n\u003cli\u003eCNC-precision milled to exact tolerances, guaranteeing a flush, rattle-free fit at every frame mounting point on the RJ15 chassis.\u003c\/li\u003e\n\u003cli\u003eHard anodised finish provides genuine corrosion resistance while giving the bike a clean, colour-coordinated racing aesthetic that holds up on track and in all weathers.\u003c\/li\u003e\n\u003cli\u003eComplete 22-piece set covers all relevant frame fixing points in a single purchase — no hunting for individual bolts or mismatched hardware.\u003c\/li\u003e\n\u003cli\u003eAvailable in five anodised finishes — black, red, gold, silver and cobalt blue — so the kit can complement any livery or personalisation scheme.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign, Finish and Heritage\u003c\/h2\u003e\u003cp\u003eLighTech has built its reputation across two decades of supplying Italian superbike teams and privateer racers with components that refuse to compromise between aesthetics and engineering. The Ergal 7075 alloy at the heart of this kit is not a marketing choice — it is the same material specified for structural components in the aerospace industry, chosen here for its exceptional strength-to-weight ratio and resistance to fatigue under repeated stress cycles.\u003c\/p\u003e\u003cp\u003eEach bolt is turned and milled on CNC machinery to dimensions that mirror the OEM hardware they replace. The hard anodising process that follows is not simply a cosmetic step: it creates a durable oxide layer that resists the corrosive cocktail of brake dust, chain lubricant and road grime that fasteners are routinely exposed to. The result is a bolt that still looks sharp after a full race season, not just at the first fitting.\u003c\/p\u003e\u003ch2\u003eOn Road and On Track\u003c\/h2\u003e\u003cp\u003eFor riders who use their R6 in anger — track days, club racing or the occasional sprint road ride — the cumulative weight reduction across 22 fasteners contributes to a marginally lower unsprung and chassis mass. More visibly, replacing the standard silver steel bolts with a matched anodised set ties together fairing gaps and exposed frame sections in a way that feels intentional rather than incidental. The kit is equally at home on an immaculate road bike where presentation matters as much as lap times.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eYamaha YZF-R6 RJ15 (2008–2016)\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eLighTech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003e8Y6T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eErgal 7075 aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurface finish\u003c\/td\u003e\n\u003ctd\u003eHard anodised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003e22 frame bolts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailable colours\u003c\/td\u003e\n\u003ctd\u003eBlack (8Y6TNER), Red (8Y6TROS), Gold (8Y6TORO), Silver (8Y6TSIL), Cobalt (8Y6TCOB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eYamaha YZF-R6 RJ15 (2008–2016)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"LighTech","offers":[{"title":"Black","offer_id":53168225190154,"sku":"8Y6TNER","price":95.75,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":53168225222922,"sku":"8Y6TROS","price":95.75,"currency_code":"EUR","in_stock":true},{"title":"Gold","offer_id":53168225255690,"sku":"8Y6TORO","price":95.75,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":53168225288458,"sku":"8Y6TSIL","price":95.75,"currency_code":"EUR","in_stock":true},{"title":"Blue","offer_id":53168225321226,"sku":"8Y6TCOB","price":95.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ENGAP001NER_c0ebd0c2-989d-4925-808f-7fc1e7ba592c.png?v=1780808483"},{"product_id":"lightech-aluminium-frame-bolt-kit-yamaha-yzf-r6-rj27-6y7t","title":"LighTech Aluminium Frame Bolt Kit Yamaha YZF-R6 RJ27 (2017-2026) 6Y7T","description":"\u003cp\u003eEvery detail on your Yamaha YZF-R6 deserves the same attention you give to the riding itself. The LighTech aluminium frame bolt kit 6Y7T replaces all relevant factory frame fixings on the RJ27 chassis with a precision-machined, anodised set that saves weight, resists corrosion, and gives the bike a purposeful, track-bred appearance — without compromising a single point of structural integrity.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMachined from Ergal 7075 aerospace-grade aluminium — an exceptional strength-to-weight ratio that keeps every fastener secure under the stresses of track and road alike.\u003c\/li\u003e\n\u003cli\u003eCNC-milled to exacting tolerances, ensuring each bolt locates perfectly in its corresponding frame mounting point with no play, no fuss, and no persuasion required.\u003c\/li\u003e\n\u003cli\u003eHard anodised finish delivers lasting corrosion resistance and a clean, consistent colour that holds up to weather, heat cycles, and trackday grime.\u003c\/li\u003e\n\u003cli\u003eComplete 16-piece set covers all relevant frame fixing positions on the RJ27 — one kit, one purchase, no hunting for individual sizes.\u003c\/li\u003e\n\u003cli\u003eAvailable in five anodised colours — Black (6Y7TNER), Gold (6Y7TORO), Red (6Y7TROS), Silver (6Y7TSIL), and Cobalt (6Y7TCOB) — so the finish coordinates with your R6's livery rather than fighting it.\u003c\/li\u003e\n\u003cli\u003eEqually at home on a road bike or a dedicated track machine; the weight saving and visual upgrade reward both uses immediately.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuality and Construction\u003c\/h2\u003e\u003cp\u003eErgal 7075 is the same aluminium alloy specification found in aerospace structural components and high-end motorsport hardware. Its tensile strength comfortably exceeds that of standard 6061 alloy, making it a genuine performance material rather than a cosmetic one. LighTech applies multi-axis CNC machining to each bolt, so thread engagement and head geometry are held to tolerances that match or exceed the original equipment. The anodising is applied after machining, sealing the surface at the molecular level and locking in the colour for the long term.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis kit is designed and manufactured exclusively for the following motorcycle:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eYamaha YZF-R6 RJ27 (2017–2026)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThe set covers all relevant frame mounting positions for the RJ27 generation. If you are unsure whether this kit fits your specific build year, the part number 6Y7T can be cross-referenced against LighTech's fitment database or confirmed with the Inter-Pace team before ordering.\u003c\/p\u003e\u003ch2\u003eColour Options and Part Numbers\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBlack — 6Y7TNER\u003c\/li\u003e\n\u003cli\u003eGold — 6Y7TORO\u003c\/li\u003e\n\u003cli\u003eRed — 6Y7TROS\u003c\/li\u003e\n\u003cli\u003eSilver — 6Y7TSIL\u003c\/li\u003e\n\u003cli\u003eCobalt — 6Y7TCOB\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's Included\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e16 aluminium frame bolts covering all relevant frame mounting points for the Yamaha YZF-R6 RJ27\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eLighTech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003e6Y7T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eErgal 7075 aerospace-grade aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHard anodised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQuantity\u003c\/th\u003e\n\u003ctd\u003e16 frame bolts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment\u003c\/th\u003e\n\u003ctd\u003eYamaha YZF-R6 RJ27 (2017–2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntended Use\u003c\/th\u003e\n\u003ctd\u003eRoad and track\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"LighTech","offers":[{"title":"Black","offer_id":53168226173194,"sku":"6Y7TNER","price":62.65,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":53168226205962,"sku":"6Y7TROS","price":62.65,"currency_code":"EUR","in_stock":true},{"title":"Gold","offer_id":53168226238730,"sku":"6Y7TORO","price":62.65,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":53168226271498,"sku":"6Y7TSIL","price":62.65,"currency_code":"EUR","in_stock":true},{"title":"Cobalt Blue","offer_id":53168226304266,"sku":"6Y7TCOB","price":62.65,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ENGAP001NER_19428aeb-7644-4cf9-b21e-2b6a07bab71e.png?v=1780808483"},{"product_id":"lightech-aluminium-frame-bolt-kit-yamaha-yzf-r7-frmya002","title":"LighTech Aluminium Frame Bolt Kit Yamaha YZF-R7 (2021-2026) FRMYA002","description":"\u003cp\u003eEvery bolt on your Yamaha YZF-R7 is a structural commitment — and the LighTech FRMYA002 frame bolt kit ensures each one is up to the task. Machined from Ergal 7075 aluminium, this 15-piece set meets the precision and reliability demands of both road and track use, while shaving meaningful unsprung mass from your chassis in a single straightforward swap.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eErgal 7075 aluminium construction: one of the highest-strength aluminium alloys available, delivering an exceptional strength-to-weight ratio alongside natural corrosion resistance for long service life in all conditions.\u003c\/li\u003e\n\u003cli\u003eCNC-machined to exacting tolerances, ensuring a precise fit at every frame mounting point on the YZF-R7 without modification or adjustment.\u003c\/li\u003e\n\u003cli\u003eAnodised finish provides a hard, weather-resistant surface layer that protects the alloy underneath while maintaining the clean racing aesthetic across all five colour options.\u003c\/li\u003e\n\u003cli\u003eComplete 15-piece set covers all relevant frame fastener positions — no hunting for individual bolts or mixing hardware grades.\u003c\/li\u003e\n\u003cli\u003eAvailable in black (FRMYA002NER), gold (FRMYA002ORO), red (FRMYA002ROS), silver (FRMYA002SIL) and cobalt (FRMYA002COB) to co-ordinate with your R7's livery or personal colour scheme.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEngineering and Build Quality\u003c\/h2\u003e\u003cp\u003eLighTech developed this kit specifically around the Yamaha YZF-R7's frame architecture, so tolerances are dialled in from the outset. Ergal 7075 is the same alloy grade used extensively in motorsport and aerospace applications — its yield strength far exceeds that of standard 6061 aluminium, making it a structurally sound replacement for the factory steel fasteners in non-critical frame locations. The anodised surface treatment adds a further layer of durability, resisting the scratches and oxidation that would otherwise accumulate during everyday road riding or pit-lane work.\u003c\/p\u003e\u003ch2\u003eRoad and Track Use\u003c\/h2\u003e\u003cp\u003eThe FRMYA002 kit is equally at home on the Sunday morning commute and on the circuit. Riders preparing the YZF-R7 for track days will appreciate the reduced rotating and chassis mass, however marginal, as part of a broader lightweight build. On the road, the precision fit and corrosion-resistant finish mean the bolts remain easy to remove and retorque at service intervals — a practical benefit that steel originals cannot always match after a wet season. Always torque to the manufacturer's specified values and inspect fasteners regularly as part of routine maintenance.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eYamaha YZF-R7 (2021–2026)\u003c\/li\u003e\n\u003cli\u003ePart number: FRMYA002\u003c\/li\u003e\n\u003cli\u003eColour-specific part numbers: black FRMYA002NER, gold FRMYA002ORO, red FRMYA002ROS, silver FRMYA002SIL, cobalt FRMYA002COB\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eLighTech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eFRMYA002\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eErgal 7075 aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurface finish\u003c\/td\u003e\n\u003ctd\u003eAnodised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003e15-piece set\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eYamaha YZF-R7 (2021–2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailable colours\u003c\/td\u003e\n\u003ctd\u003eBlack, Gold, Red, Silver, Cobalt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"LighTech","offers":[{"title":"Black","offer_id":53168226631946,"sku":"FRMYA002NER","price":40.37,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":53168226664714,"sku":"FRMYA002ROS","price":40.37,"currency_code":"EUR","in_stock":true},{"title":"Gold","offer_id":53168226697482,"sku":"FRMYA002ORO","price":40.37,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":53168226730250,"sku":"FRMYA002SIL","price":40.37,"currency_code":"EUR","in_stock":true},{"title":"Blue","offer_id":53168226763018,"sku":"FRMYA002COB","price":40.37,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ENGAP001NER_43fab527-99f1-4835-a0e0-2e13324885e5.png?v=1780808483"},{"product_id":"lightech-rear-wheel-nut-yamaha-yzf-r7","title":"LighTech Rear Wheel Nut for Yamaha YZF-R7 (2021-2026) - D004","description":"\u003cp\u003eEvery gram matters on a machine as focused as the Yamaha YZF-R7, and the LighTech D004 rear wheel nut is engineered with exactly that philosophy in mind. Machined from aerospace-grade Ergal 7075 aluminium, it delivers a secure, precise fit that feels entirely at home whether you are covering road miles in comfort or pushing hard through a track day.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eErgal 7075 aluminium construction — ultra-lightweight yet exceptionally strong for demanding road and track use\u003c\/li\u003e\n\u003cli\u003eCNC-machined to exacting tolerances for a perfect, rattle-free fit on the Yamaha YZF-R7 axle\u003c\/li\u003e\n\u003cli\u003eHard-anodised finish resists corrosion and retains its colour through repeated use in all conditions\u003c\/li\u003e\n\u003cli\u003eAvailable in five anodised colours — black, blue, red, gold and silver — to complement any livery\u003c\/li\u003e\n\u003cli\u003eRated to a maximum tightening torque of 120 Nm for confident, reliable wheel retention\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePrecision Where It Counts\u003c\/h2\u003e\u003cp\u003eLighTech's CNC precision-machining process ensures every D004 nut meets tight dimensional tolerances. The M18x1.5 thread engages cleanly and evenly across the full contact face, eliminating the uneven loading that can occur with lesser hardware. At 29 mm in diameter and just 14 mm tall, with a 22 mm hex drive, it integrates neatly with standard tooling and sits flush without fouling surrounding components. The result is a component that installs in minutes and inspires confidence every time you torque it to spec.\u003c\/p\u003e\u003ch2\u003eRoad and Track Ready\u003c\/h2\u003e\u003cp\u003eThe Ergal 7075 alloy used by LighTech is the same material specification trusted by aerospace and motorsport engineers for parts that must be light and reliable simultaneously. The anodised surface treatment is not merely cosmetic — it creates a hard oxide layer that protects against moisture, road grime and the thermal cycling inevitable on a performance motorcycle. Whether the YZF-R7 is your daily sports machine or your weekend circuit tool, the D004 is built to last the distance without adding unnecessary rotating mass.\u003c\/p\u003e\u003ch2\u003eColour Options\u003c\/h2\u003e\u003cp\u003eThe D004 is available in five anodised finishes, each with its own part number for straightforward reordering:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBlack — D004NER\u003c\/li\u003e\n\u003cli\u003eBlue — D004COB\u003c\/li\u003e\n\u003cli\u003eRed — D004ROS\u003c\/li\u003e\n\u003cli\u003eGold — D004ORO\u003c\/li\u003e\n\u003cli\u003eSilver — D004SIL\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eYamaha YZF-R7 (2021–2026)\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eLighTech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eD004\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eErgal 7075 aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread\u003c\/td\u003e\n\u003ctd\u003eM18x1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e29 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e14 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHex diameter\u003c\/td\u003e\n\u003ctd\u003e22 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum tightening torque\u003c\/td\u003e\n\u003ctd\u003e120 Nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eHard-anodised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eYamaha YZF-R7 (2021–2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"LighTech","offers":[{"title":"Black","offer_id":53168227844362,"sku":"D004NER","price":23.67,"currency_code":"EUR","in_stock":true},{"title":"Blue","offer_id":53168227877130,"sku":"D004COB","price":23.67,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":53168227909898,"sku":"D004ROS","price":23.67,"currency_code":"EUR","in_stock":true},{"title":"Gold","offer_id":53168227942666,"sku":"D004ORO","price":23.67,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":53168227975434,"sku":"D004SIL","price":23.67,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/D004NER_5d0c719c-0ab8-4378-8868-37e39351eea8.png?v=1780808483"},{"product_id":"k-bike-aluminium-rear-wheel-nut-ducati-panigale-1199-s-r-dm48x1-5","title":"K-Bike Aluminium Rear Wheel Nut for Ducati Panigale 1199\/S\/R (2012-2017) DM48X1,5","description":"\u003cp\u003eWhen safety and security at the rear axle matter as much as aesthetics, the K-Bike aluminium rear wheel nut DM48X1,5 is the only choice for your Ducati Panigale 1199, 1199 S, or 1199 R. CNC-machined from aerospace-grade 7075 T6 Ergal aluminium and engineered to the original torque specification, this nut delivers genuine engineering confidence alongside a striking racing finish on your single-sided swingarm.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrecision-engineered to the exact M48x1,5 thread specification, functioning as a direct, torque-correct replacement for the OEM rear wheel nut\u003c\/li\u003e\n\u003cli\u003eCNC-machined from 7075 T6 Ergal aluminium — the same high-strength alloy used in motorsport and aerospace applications — for exceptional load resistance with minimal weight\u003c\/li\u003e\n\u003cli\u003eTwo-piece design (nut plus separate centering cone) accommodates a washer, improving load distribution, protecting adjacent surfaces from wear, and reducing the risk of loosening under vibration\u003c\/li\u003e\n\u003cli\u003eCompatible with K-Bike cone COM48 for a contrasting two-colour effect on the exposed swingarm end\u003c\/li\u003e\n\u003cli\u003eAvailable in eight anodised colours: black, red, blue, silver, green, orange, titanium, and gold\u003c\/li\u003e\n\u003cli\u003ePrecise fitment for Ducati Panigale 1199, 1199 S and 1199 R, model years 2012 to 2017\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEngineering Integrity Where It Counts\u003c\/h2\u003e\u003cp\u003eThe rear wheel nut on a single-sided swingarm is not merely decorative — it is a safety-critical fastener. K-Bike has designed the DM48X1,5 to respect the factory torque value, so installation follows the same procedure as the original component. No adapters, no compromises, no uncertainty about clamping force. The nut threads directly onto the axle and seats exactly as the OEM part does, giving you full confidence whether you are torquing up for a track day or a road ride.\u003c\/p\u003e\u003ch2\u003eStructural Advantage of the Two-Piece Design\u003c\/h2\u003e\u003cp\u003eBy separating the nut body from the centering cone, K-Bike has created a geometry that can receive a washer between the two elements. This seemingly small detail has measurable consequences: load is spread more evenly across the contact face, the anodised surface of the nut is shielded from direct axle-flange contact, and micro-movement under sustained vibration is resisted more effectively. For riders who push hard on track, or who simply demand that every fastener remains exactly where they put it, this construction matters.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThe K-Bike rear wheel nut DM48X1,5 is designed exclusively for the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale 1199 — 2012 to 2017\u003c\/li\u003e\n\u003cli\u003eDucati Panigale 1199 S — 2012 to 2017\u003c\/li\u003e\n\u003cli\u003eDucati Panigale 1199 R — 2012 to 2017\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCompatible accessory: K-Bike cone COM48. Always lightly lubricate the thread before installation and torque to the manufacturer's specified value.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eK-Bike\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eDM48X1,5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e7075 T6 Ergal aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturing\u003c\/td\u003e\n\u003ctd\u003eCNC-machined\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible accessory\u003c\/td\u003e\n\u003ctd\u003eKonus COM48\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailable colours\u003c\/td\u003e\n\u003ctd\u003eBlack, Red, Blue, Silver, Green, Orange, Titanium, Gold\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread size\u003c\/td\u003e\n\u003ctd\u003eM48x1,5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"K-Bike","offers":[{"title":"Red","offer_id":53168671719690,"sku":"DM48X1,5R","price":35.7,"currency_code":"EUR","in_stock":true},{"title":"Black","offer_id":53168671752458,"sku":"DM48X1,5N","price":35.7,"currency_code":"EUR","in_stock":true},{"title":"Gold","offer_id":53168671785226,"sku":"DM48X1,5O","price":35.7,"currency_code":"EUR","in_stock":true},{"title":"Green","offer_id":53168671817994,"sku":"DM48X1,5V","price":35.7,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":53168671850762,"sku":"DM48X1,5S","price":35.7,"currency_code":"EUR","in_stock":true},{"title":"Orange","offer_id":53168671883530,"sku":"DM48X1,5AR","price":35.7,"currency_code":"EUR","in_stock":true},{"title":"Titanium","offer_id":53168671916298,"sku":"DM48X1,5T","price":35.7,"currency_code":"EUR","in_stock":true},{"title":"Blue","offer_id":53168671949066,"sku":"DM48X1,5B","price":35.7,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/DM48X1_5_red_cab39aad-00f0-4e65-b82d-3a37075a7857.png?v=1784300729"},{"product_id":"k-bike-aluminium-rear-wheel-nut-ducati-panigale-1299-s-dm48x1-5","title":"K-Bike Aluminium Rear Wheel Nut for Ducati Panigale 1299\/S (2015-2018) DM48X1,5","description":"\u003cp\u003eMachined from aerospace-grade 7075 T6 Ergal aluminium, the K-Bike rear wheel nut DM48X1,5 is a precision-crafted upgrade that replaces the factory nut on the Ducati Panigale 1299 and 1299 S with something worthy of the machine it sits on. Where the stock nut is purely functional, this CNC-milled component transforms the single-sided swingarm's most visible fastener into a defining detail — available in eight anodised colours to complement any build.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCNC-milled from 7075 T6 Ergal aluminium — the same high-strength, low-weight alloy used throughout motorsport for demanding structural applications\u003c\/li\u003e\n\u003cli\u003eM48x1,5 thread (part number DM48X1,5) is a direct, precise replacement for the original rear wheel nut — no modification required\u003c\/li\u003e\n\u003cli\u003eNut and centring cone are manufactured as separate components, allowing a washer to be fitted for even load distribution and protection of sensitive contact surfaces against wear and pressure marks\u003c\/li\u003e\n\u003cli\u003eCompatible with the K-Bike COM48 cone, enabling a striking two-tone colour combination for custom track and race builds\u003c\/li\u003e\n\u003cli\u003eAvailable in eight anodised finishes: Black, Red, Blue, Silver, Green, Orange, Titanium and Gold\u003c\/li\u003e\n\u003cli\u003eUses the same torque specification as the OEM part, making installation straightforward and safe\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003e7075 T6 Ergal Aluminium — Material That Means Business\u003c\/h2\u003e\u003cp\u003e7075 T6 Ergal is a premium aerospace aluminium alloy prized in motorsport for delivering exceptional tensile strength while keeping mass to an absolute minimum. K-Bike machines this nut from solid billet, ensuring consistent wall thickness, clean thread engagement and a surface finish that holds its anodised colour through repeated wheel removals. This is not a cosmetic trinket; it is a structurally sound replacement part built to the same exacting tolerances as the components it is designed to work alongside.\u003c\/p\u003e\u003ch2\u003eEngineered Load Distribution\u003c\/h2\u003e\u003cp\u003eBy manufacturing the nut body and centring cone as separate pieces, K-Bike introduces a design advantage rarely seen at this price point. A washer can be placed between the two, spreading clamping load more evenly across the hub face and shielding delicate aluminium contact surfaces from the fretting and indentation that repeated torquing can cause. For a track machine that sees frequent wheel changes, this detail matters far more than it might appear.\u003c\/p\u003e\u003ch2\u003eTwo-Tone Customisation with the COM48 Cone\u003c\/h2\u003e\u003cp\u003ePair the DM48X1,5 nut with the optional K-Bike COM48 centring cone and the swingarm end becomes a canvas. Choosing contrasting anodised colours for each piece produces a layered, race-paddock aesthetic that elevates the rear of the Panigale well beyond stock. The combination is particularly effective on track builds and livery-matched machines where every visible component is considered.\u003c\/p\u003e\u003ch2\u003eColour Range\u003c\/h2\u003e\u003cp\u003eThe DM48X1,5 is offered in eight anodised finishes: Black, Red, Blue, Silver, Green, Orange, Titanium and Gold. Each colour is achieved through an anodising process that bonds the finish to the alloy surface rather than sitting on top of it, giving far better durability than paint or powder coating on a rotating, torqued fastener.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis rear wheel nut fits the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale 1299 — 2015, 2016, 2017, 2018\u003c\/li\u003e\n\u003cli\u003eDucati Panigale 1299 S — 2015, 2016, 2017, 2018\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThread specification: M48x1,5. Compatible accessory: K-Bike COM48 cone. Always torque to the Ducati factory specification for the rear axle nut. Apply a light film of grease to the thread before fitting to aid even torque take-up and prevent galling between aluminium surfaces.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eK-Bike\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eDM48X1,5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e7075 T6 Ergal aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacture\u003c\/td\u003e\n\u003ctd\u003eCNC-milled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread size\u003c\/td\u003e\n\u003ctd\u003eM48x1,5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible accessory\u003c\/td\u003e\n\u003ctd\u003eCone COM48\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailable colours\u003c\/td\u003e\n\u003ctd\u003eBlack, Red, Blue, Silver, Green, Orange, Titanium, Gold\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"K-Bike","offers":[{"title":"Red","offer_id":53168672047370,"sku":"DM48X1,5R","price":35.7,"currency_code":"EUR","in_stock":true},{"title":"Black","offer_id":53168672080138,"sku":"DM48X1,5N","price":35.7,"currency_code":"EUR","in_stock":true},{"title":"Gold","offer_id":53168672112906,"sku":"DM48X1,5O","price":35.7,"currency_code":"EUR","in_stock":true},{"title":"Green","offer_id":53168672145674,"sku":"DM48X1,5V","price":35.7,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":53168672178442,"sku":"DM48X1,5S","price":35.7,"currency_code":"EUR","in_stock":true},{"title":"Orange","offer_id":53168672211210,"sku":"DM48X1,5AR","price":35.7,"currency_code":"EUR","in_stock":true},{"title":"Titanium","offer_id":53168672243978,"sku":"DM48X1,5T","price":35.7,"currency_code":"EUR","in_stock":true},{"title":"Blue","offer_id":53168672276746,"sku":"DM48X1,5B","price":35.7,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/DM48X1_5_red_1d9ad993-bed5-434d-a306-547053d1fcb8.png?v=1784300734"},{"product_id":"k-bike-aluminium-rear-axle-nut-ducati-panigale-v4-v4-s-v4-r-dm48x1-5","title":"K-Bike Aluminium Rear Axle Nut for Ducati Panigale V4 \/ V4 S \/ V4 R (2018-2024) DM48X1,5","description":"\u003cp\u003eThe single-sided swingarm of the Ducati Panigale V4 puts the rear axle nut on full display — every ride, every paddock walk, every photo. K-Bike's CNC-machined aluminium rear axle nut DM48X1,5 transforms that exposed fastener from a forgettable OEM part into a precision-finished detail that is every bit as uncompromising as the V4 itself.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCNC-machined from 7075 T6 Ergal aluminium — exceptional strength-to-weight ratio for a direct OEM replacement\u003c\/li\u003e\n\u003cli\u003ePrecise M48x1,5 thread matches factory specification; tightened to the manufacturer's prescribed torque\u003c\/li\u003e\n\u003cli\u003eSeparate nut and centering cone design allows a washer to be used, distributing clamping load evenly and protecting surrounding surfaces from pressure marks and wear\u003c\/li\u003e\n\u003cli\u003eCompatible with the K-Bike COM48 centering cone for a striking two-tone finish at the rear wheel\u003c\/li\u003e\n\u003cli\u003eEight anodised colour options — coordinate with wheels, rearsets, levers and other anodised add-on parts for a coherent build\u003c\/li\u003e\n\u003cli\u003ePurpose-built for road, track and full Ducati Panigale V4 customisation builds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign, Finish and Heritage\u003c\/h2\u003e\u003cp\u003eK-Bike has built its reputation on jewel-like precision parts that live up to the machines they dress. The DM48X1,5 rear axle nut is machined in a single operation from solid 7075 T6 Ergal — the same aerospace-grade aluminium alloy used across motorsport for its combination of high tensile strength and low mass. The result is a fastener whose contours are crisp, whose anodised surface catches the light, and whose presence at the centre of the V4's iconic single-sided swingarm reads as entirely intentional.\u003c\/p\u003e\u003cp\u003eUnlike a simple turned nut, the K-Bike unit is manufactured separately from its centering cone. This separation makes it straightforward to insert a washer between nut and hub, spreading the clamping force across a wider area and eliminating the micro-scoring that can accumulate on alloy surfaces under repeated tightening cycles and track vibration.\u003c\/p\u003e\u003ch2\u003eTwo-Tone Customisation with COM48\u003c\/h2\u003e\u003cp\u003ePair the DM48X1,5 with the matching K-Bike COM48 centering cone in a contrasting anodised colour and the rear of the Panigale V4 takes on a bespoke, motorsport-influenced appearance. With eight anodised finishes available across both components — black, red, blue, silver, green, orange, titanium and gold — the combinations are wide enough to complement virtually any livery or parts palette.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThe K-Bike DM48X1,5 rear axle nut is a direct, plug-in replacement for the original rear axle nut on the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale V4 — 2018 to 2024\u003c\/li\u003e\n\u003cli\u003eDucati Panigale V4 S — 2018 to 2024\u003c\/li\u003e\n\u003cli\u003eDucati Panigale V4 R — 2018 to 2024\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitting Note\u003c\/h2\u003e\u003cp\u003eApply a light grease to the thread before installation. Tighten to the torque value specified by Ducati for the original rear axle nut. Compatible centering cone: K-Bike COM48.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eK-Bike\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eDM48X1,5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e7075 T6 Ergal aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacture\u003c\/th\u003e\n\u003ctd\u003eCNC-machined\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible Accessory\u003c\/th\u003e\n\u003ctd\u003eKonus COM48\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColours\u003c\/th\u003e\n\u003ctd\u003eBlack, Red, Blue, Silver, Green, Orange, Titanium, Gold\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread Size\u003c\/th\u003e\n\u003ctd\u003eM48x1,5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"K-Bike","offers":[{"title":"Red","offer_id":53168672309514,"sku":"DM48X1,5R","price":35.7,"currency_code":"EUR","in_stock":true},{"title":"Black","offer_id":53168672342282,"sku":"DM48X1,5N","price":35.7,"currency_code":"EUR","in_stock":true},{"title":"Gold","offer_id":53168672375050,"sku":"DM48X1,5O","price":35.7,"currency_code":"EUR","in_stock":true},{"title":"Green","offer_id":53168672407818,"sku":"DM48X1,5V","price":35.7,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":53168672440586,"sku":"DM48X1,5S","price":35.7,"currency_code":"EUR","in_stock":true},{"title":"Orange","offer_id":53168672473354,"sku":"DM48X1,5AR","price":35.7,"currency_code":"EUR","in_stock":true},{"title":"Titanium","offer_id":53168672506122,"sku":"DM48X1,5T","price":35.7,"currency_code":"EUR","in_stock":true},{"title":"Blue","offer_id":53168672538890,"sku":"DM48X1,5B","price":35.7,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/DM48X1_5_red_38b8705d-f1a9-4670-974b-4eff674db8d9.png?v=1784300739"},{"product_id":"k-bike-aluminium-rear-wheel-nut-ducati-panigale-v2-955-dm48x1-5","title":"K-Bike Aluminium Rear Wheel Nut for Ducati Panigale V2 955 (2020-2024) DM48X1,5","description":"\u003cp\u003eOn the single-sided swingarm of the Ducati Panigale V2 955, the rear axle nut is never hidden — it is on full display, framed by open bodywork and a naked wheel. The K-Bike DM48X1,5 aluminium rear wheel nut turns that exposed fastener into a deliberate design statement, machined from aerospace-grade 7075 T6 Ergal aluminium and finished in eight anodised colours to complement the Italian racing heritage of the machine it adorns.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDirect, thread-for-thread replacement for the OEM rear wheel nut — M48x1.5 thread, part number DM48X1,5\u003c\/li\u003e\n\u003cli\u003ePrecision CNC-machined from 7075 T6 Ergal aluminium, balancing minimal weight with exceptional structural strength\u003c\/li\u003e\n\u003cli\u003eNut and centering cone are manufactured as separate components, allowing a washer to distribute load evenly and protect contact surfaces from scoring and wear\u003c\/li\u003e\n\u003cli\u003eCompatible with COM48 cone for a contrasting two-tone finish\u003c\/li\u003e\n\u003cli\u003eAvailable in eight anodised colours: Black, Red, Blue, Silver, Green, Orange, Titanium, Gold\u003c\/li\u003e\n\u003cli\u003eEngineered specifically for the Ducati Panigale V2 955, model years 2020 to 2024\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign, Finish and Heritage\u003c\/h2\u003e\u003cp\u003eK-Bike has built its reputation around parts that earn their place on serious Italian machinery — components that respect the engineering culture behind the Ducati name. The DM48X1,5 rear wheel nut reflects that ethos: clean geometry born from CNC milling, anodised surfaces that retain their depth under road and track use, and a form that sits naturally alongside the Panigale V2's factory aesthetic.\u003c\/p\u003e\u003cp\u003eThe choice of 7075 T6 Ergal is deliberate. This alloy has long been the material of choice in motorsport where weight and rigidity must coexist — the same grade used in chassis components, suspension hardware and high-load bracketry across top-level racing categories. On the Panigale V2, that pedigree reads as much in the quality of the finish as in any measurable reduction in rotating mass.\u003c\/p\u003e\u003ch2\u003eEngineering Detail That Earns Its Place\u003c\/h2\u003e\u003cp\u003eWhere many aftermarket wheel nuts are produced as a single-piece assembly, the K-Bike unit separates the nut body from its centering cone. This split construction means a washer can be introduced into the stack, spreading clamping forces across a larger contact area and shielding the wheel surface from the localised pressure and micro-scratching that accumulates over repeated removal and refitting. For a machine used on track — where wheel changes happen quickly and frequently — this is a considered detail rather than a cosmetic one.\u003c\/p\u003e\u003cp\u003eThe M48x1.5 thread accepts the same torque specification as the original Ducati fastener, so fitment follows standard procedure: lightly grease the thread before installation and torque to the manufacturer's specified value. No re-drilling, no adapters, no compromises.\u003c\/p\u003e\u003ch2\u003eColour to Match Your Build\u003c\/h2\u003e\u003cp\u003eWhether the Panigale V2 is finished in classic Ducati Rosso with red anodised levers and rearsets, or built around a stealthy monochrome theme with titanium and black hardware, the DM48X1,5 is available in a colour to complete the picture. Pair a contrasting colour with the COM48 cone accessory to create a layered two-tone effect that draws the eye exactly where a well-built swingarm should.\u003c\/p\u003e\u003cp\u003eAvailable colours: Black, Red, Blue, Silver, Green, Orange, Titanium, Gold.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis rear wheel nut is engineered exclusively for the Ducati Panigale V2 955, covering all model years from 2020 to 2024. It is a direct replacement for the original Ducati rear wheel nut and requires no modification to the wheel, swingarm or axle assembly. Compatible accessory: COM48 cone.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eK-Bike\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eDM48X1,5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e7075 T6 Ergal aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacture\u003c\/td\u003e\n\u003ctd\u003eCNC-machined\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible accessory\u003c\/td\u003e\n\u003ctd\u003eCOM48 cone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailable colours\u003c\/td\u003e\n\u003ctd\u003eBlack, Red, Blue, Silver, Green, Orange, Titanium, Gold\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread size\u003c\/td\u003e\n\u003ctd\u003eM48x1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"K-Bike","offers":[{"title":"Red","offer_id":53168672637194,"sku":"DM48X1,5R","price":35.7,"currency_code":"EUR","in_stock":true},{"title":"Black","offer_id":53168672669962,"sku":"DM48X1,5N","price":35.7,"currency_code":"EUR","in_stock":true},{"title":"Gold","offer_id":53168672702730,"sku":"DM48X1,5O","price":35.7,"currency_code":"EUR","in_stock":true},{"title":"Green","offer_id":53168672735498,"sku":"DM48X1,5V","price":35.7,"currency_code":"EUR","in_stock":true},{"title":"Silver","offer_id":53168672768266,"sku":"DM48X1,5S","price":35.7,"currency_code":"EUR","in_stock":true},{"title":"Orange","offer_id":53168672801034,"sku":"DM48X1,5AR","price":35.7,"currency_code":"EUR","in_stock":true},{"title":"Titanium","offer_id":53168672833802,"sku":"DM48X1,5T","price":35.7,"currency_code":"EUR","in_stock":true},{"title":"Blue","offer_id":53168672866570,"sku":"DM48X1,5B","price":35.7,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/DM48X1_5_red_01dd90f3-1a87-49e6-bf7c-57ed9be0c160.png?v=1784300744"},{"product_id":"k-bike-titanium-rear-wheel-nut-ducati-panigale-1199-1199-s-1199-r","title":"K-Bike Titanium Rear Wheel Nut for Ducati Panigale 1199 \/ 1199 S \/ 1199 R (2012–2017) – DM48x1.5TIT","description":"\u003cp\u003eEvery gram and every component counts on the Ducati Panigale 1199, and the K-Bike Titanium Rear Wheel Nut DM48x1.5TIT is proof that functional upgrades and refined aesthetics are not mutually exclusive. Machined from Grade 5 titanium and tipping the scales at just approx. 67.6 g, this M48x1.5 rear axle nut is a precision-engineered drop-in replacement that elevates the single-sided swingarm of your Panigale without compromise.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrecision fitment for Ducati Panigale 1199, 1199 S and 1199 R (2012–2017) via M48x1.5 thread — direct replacement for the OEM rear wheel nut\u003c\/li\u003e\n\u003cli\u003eGrade 5 titanium construction delivers an outstanding strength-to-weight ratio at approx. 67.6 g\u003c\/li\u003e\n\u003cli\u003eExcellent corrosion resistance makes it equally at home on track days and demanding outdoor environments\u003c\/li\u003e\n\u003cli\u003eNatural titanium finish reads as understated, technical and professional — no garish colour, just pure material quality\u003c\/li\u003e\n\u003cli\u003eDeveloped specifically for racing and high-performance builds where every detail matters\u003c\/li\u003e\n\u003cli\u003eA genuine K-Bike racing component, engineered to the tolerances demanded by competitive and track-focused Ducati riders\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eGrade 5 Titanium: Light, Strong, Corrosion-Resistant\u003c\/h2\u003e\u003cp\u003eGrade 5 titanium — the same alloy used throughout motorsport and aerospace — gives this K-Bike rear wheel nut an exceptional balance of tensile strength, low mass and long-term durability. At approximately 67.6 g it represents a meaningful weight saving over a standard steel unit, with no penalty to structural integrity. Whether you are building a dedicated track bike, dialling in a racing conversion, or simply specifying the finest available components for your Panigale, the material credentials here are unimpeachable.\u003c\/p\u003e\u003cp\u003eTitanium's inherent resistance to corrosion means the nut retains its clean, brushed appearance session after session, even under the thermal cycling and moisture exposure that a hard-worked Ducati will encounter at the circuit.\u003c\/p\u003e\u003ch2\u003eUnderstated Precision for the Single-Sided Swingarm\u003c\/h2\u003e\u003cp\u003eThe single-sided swingarm of the Panigale 1199 is one of the most visually striking elements of the machine — and the rear wheel nut sits fully exposed at its centre. Where anodised aluminium nuts draw the eye with colour, this titanium variant makes its statement through material integrity alone. The naturally lustrous, muted tone of Grade 5 titanium reads as thoroughly purposeful: the choice of a rider who understands that the best race parts do not need to shout.\u003c\/p\u003e\u003cp\u003eAs a direct OEM replacement it installs with no modification, restoring the correct M48x1.5 thread engagement and torque characteristics while upgrading the specification of one of the most visible components on the rear of your bike.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThe K-Bike DM48x1.5TIT is designed and manufactured specifically for the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale 1199 (2012–2017)\u003c\/li\u003e\n\u003cli\u003eDucati Panigale 1199 S (2012–2017)\u003c\/li\u003e\n\u003cli\u003eDucati Panigale 1199 R (2012–2017)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThread: M48x1.5. Direct replacement for the original rear wheel nut — no adaptation required.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eK-Bike\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eDM48x1.5TIT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eGrade 5 titanium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003eapprox. 67.6 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour \/ finish\u003c\/td\u003e\n\u003ctd\u003eTitanium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntended use\u003c\/td\u003e\n\u003ctd\u003eMotorsport \/ Racing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread size\u003c\/td\u003e\n\u003ctd\u003eM48x1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"K-Bike","offers":[{"title":"Titanium","offer_id":53168672899338,"sku":"DM48x1.5TIT","price":142.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/DM48X1_5_titan_d3e11020-aacb-47fc-a12b-64d4079b5839.png?v=1784300749"},{"product_id":"k-bike-titanium-rear-wheel-nut-ducati-panigale-1299-1299-s","title":"K-Bike Titanium Rear Wheel Nut for Ducati Panigale 1299 \/ 1299 S (2015-2018) – DM48x1.5TIT","description":"\u003cp\u003eA direct-fit replacement for the stock rear axle nut on the Ducati Panigale 1299 and 1299 S, the K-Bike DM48x1.5TIT brings genuine Grade 5 titanium to one of the most visible points on the single-sided swingarm — combining everyday reliability with a clean, purposeful motorsport finish that works equally well on road-going bikes and dedicated track builds.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrecision M48x1.5 thread — slots straight in as a like-for-like replacement for the OEM nut, no modifications required\u003c\/li\u003e\n\u003cli\u003eGrade 5 titanium construction delivers outstanding strength-to-weight ratio alongside excellent corrosion resistance\u003c\/li\u003e\n\u003cli\u003eWeighs just approximately 67.6 g, trimming unsprung mass where it genuinely matters\u003c\/li\u003e\n\u003cli\u003eNatural titanium finish reads as technical and refined rather than flashy — complements carbon bodywork, titanium fasteners and clean trackday builds\u003c\/li\u003e\n\u003cli\u003eFits Ducati Panigale 1299 and 1299 S model years 2015 through 2018\u003c\/li\u003e\n\u003cli\u003ePart number DM48x1.5TIT from K-Bike, a specialist in precision drivetrain and chassis accessories\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhy Titanium at the Rear Axle\u003c\/h2\u003e\u003cp\u003eOn the Panigale 1299, the rear wheel nut sits fully exposed at the centre of the single-sided swingarm, making it one of the first things anyone notices when the bike is on a stand or parked up. Upgrading from the standard steel unit to Grade 5 titanium is a straightforward swap that pays dividends in two ways: the material is roughly 45 per cent lighter than steel at equivalent strength, and titanium's natural surface oxide means corrosion from road salt, brake dust and track grime is simply not a concern over the long term.\u003c\/p\u003e\u003cp\u003eCompared with anodised aluminium wheel nuts in bold colours, the titanium variant takes a more understated approach. The natural silver-grey surface has an inherently premium quality that sits well alongside high-end components without competing for attention — the sort of detail that experienced Ducatisti tend to prefer precisely because it looks as though it belongs there.\u003c\/p\u003e\u003ch2\u003eEveryday Usability and Long-Term Value\u003c\/h2\u003e\u003cp\u003eWhile part number DM48x1.5TIT is listed for racing use, its practicality extends well beyond the circuit. The direct OEM thread specification means installation is straightforward, and the corrosion resistance ensures the nut remains easy to remove at tyre-change or service intervals — something that cannot always be said of lesser aftermarket hardware exposed to the elements over successive seasons. For riders who want a quality upgrade that delivers every time the bike goes on the stand, not just at the track, this titanium nut is a considered, durable choice.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThe K-Bike DM48x1.5TIT is designed specifically for the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale 1299 — 2015, 2016, 2017, 2018\u003c\/li\u003e\n\u003cli\u003eDucati Panigale 1299 S — 2015, 2016, 2017, 2018\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThread specification: M48x1.5. Replaces the original rear wheel nut on a direct fit basis.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eK-Bike\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eDM48x1.5TIT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eTitanium Grade 5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003eapprox. 67.6 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour \/ finish\u003c\/td\u003e\n\u003ctd\u003eTitanium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntended use\u003c\/td\u003e\n\u003ctd\u003eMotorsport \/ Racing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread size\u003c\/td\u003e\n\u003ctd\u003eM48x1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"K-Bike","offers":[{"title":"Titanium","offer_id":53168672932106,"sku":"DM48x1.5TIT","price":142.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/DM48X1_5_titan_56ce3cd5-87c2-42e4-81cc-7cdfd8d98647.png?v=1784300753"},{"product_id":"k-bike-titanium-rear-wheel-nut-ducati-panigale-v2-955-dm48x1-5tit","title":"K-Bike Titanium Rear Wheel Nut for Ducati Panigale V2 955 (2020-2024) DM48x1.5TIT","description":"\u003cp\u003eOn track, every gram and every component choice matters. The K-Bike DM48x1.5TIT titanium rear wheel nut is a precision racing detail engineered specifically for the Ducati Panigale V2 955, replacing the standard axle nut with a component that belongs on a serious circuit machine. At just approximately 67.6 g, it delivers the weight reduction and material integrity that racing and trackday builds demand.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMachined from Grade 5 titanium for exceptional strength-to-weight ratio and outstanding corrosion resistance\u003c\/li\u003e\n\u003cli\u003eM48x1.5 thread specification ensures a precise, OEM-equivalent fit on the Panigale V2 955 swingarm axle\u003c\/li\u003e\n\u003cli\u003eWeighs approximately 67.6 g — a meaningful saving over a standard steel nut for weight-conscious builds\u003c\/li\u003e\n\u003cli\u003eNatural titanium finish integrates seamlessly with carbon fibre bodywork, titanium fasteners and machined racing accessories\u003c\/li\u003e\n\u003cli\u003eDeveloped specifically for racing, trackday and high-performance street builds\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the factory rear wheel nut — no modification required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eGrade 5 Titanium — the Racing Standard\u003c\/h2\u003e\u003cp\u003eK-Bike specifies Grade 5 titanium (Ti-6Al-4V) for the DM48x1.5TIT for the same reason race teams do: it offers the strength of steel at roughly half the weight, with superior resistance to corrosion in all conditions. For a component as exposed and as visible as the rear wheel nut on the Panigale V2's single-sided swingarm, that combination of properties is exactly what a performance build requires.\u003c\/p\u003e\u003cp\u003eThe natural titanium surface finish needs no paint or anodising to look the part. It carries the understated, industrial elegance that distinguishes a genuinely track-focused machine from one that merely looks the role — a subtle but unmistakable mark of quality when the wheel is removed in the pits or on display in the paddock.\u003c\/p\u003e\u003ch2\u003eBuilt for Racing, Ready for the Road\u003c\/h2\u003e\u003cp\u003eWhether you are assembling a dedicated circuit bike, preparing for trackdays or upgrading your Panigale V2 955 with premium performance hardware, the K-Bike titanium rear wheel nut is the correct choice. It pairs visually and functionally with titanium bolt kits, carbon rear huggers, billet aluminium accessories and the clean, purposeful aesthetic of a well-built racing Ducati.\u003c\/p\u003e\u003cp\u003eAs a direct replacement for the OEM nut, installation is straightforward — no machining, no adapters, no compromise. The DM48x1.5TIT is designed from the outset to fit exactly right, stay put under race conditions and look exceptional doing it.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis K-Bike titanium rear wheel nut is developed and validated for the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDucati Panigale V2 955 — model years 2020, 2021, 2022, 2023, 2024\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eK-Bike\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eDM48x1.5TIT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eGrade 5 titanium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003eapprox. 67.6 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour \/ finish\u003c\/td\u003e\n\u003ctd\u003eTitanium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntended use\u003c\/td\u003e\n\u003ctd\u003eRacing \/ track\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread size\u003c\/td\u003e\n\u003ctd\u003eM48x1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"K-Bike","offers":[{"title":"Titanium","offer_id":53168673030410,"sku":"DM48x1.5TIT","price":142.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/DM48X1_5_titan_2d075b1f-d387-4584-88eb-02c80e5fb69c.png?v=1784300758"},{"product_id":"k-bike-titanium-rear-wheel-nut-ducati-panigale-v4-s-r-dm48x1-5tit","title":"K-Bike Titanium Rear Wheel Nut for Ducati Panigale V4\/S\/R (2018-2024) DM48x1.5TIT","description":"\u003cp\u003eWhen every gram and every component choice reflects a commitment to track-focused performance, the K-Bike Titanium Rear Wheel Nut DM48x1.5TIT delivers exactly that standard. Machined from Grade 5 titanium and weighing just approx. 67.6 g, this M48x1.5 rear axle nut is engineered as a direct OEM replacement on the Ducati Panigale V4, V4 S and V4 R — bringing factory racing-grade material quality to one of the most visually exposed components on the single-sided swingarm.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDirect OEM replacement with M48x1.5 thread — precision fit on Ducati Panigale V4, V4 S and V4 R (2018–2024)\u003c\/li\u003e\n\u003cli\u003eGrade 5 titanium construction delivers an outstanding strength-to-weight ratio at approx. 67.6 g\u003c\/li\u003e\n\u003cli\u003eExceptional corrosion resistance — built to endure demanding track conditions without surface degradation\u003c\/li\u003e\n\u003cli\u003eNatural titanium finish offers a clean, technically refined aesthetic that complements carbon fibre, titanium fasteners and machined racing components\u003c\/li\u003e\n\u003cli\u003ePurpose-rated for motorsport and racing applications\u003c\/li\u003e\n\u003cli\u003ePremium K-Bike manufacture with the precision tolerances expected at circuit level\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eGrade 5 Titanium — Race-Proven Material\u003c\/h2\u003e\u003cp\u003eGrade 5 titanium, also known as Ti-6Al-4V, is the alloy of choice across aerospace and professional motorsport for a reason: it combines the tensile strength required under high-load racing conditions with a mass reduction that aluminium cannot match at equivalent strength. At approximately 67.6 g, the DM48x1.5TIT removes meaningful unsprung weight from the rear axle assembly — a marginal gain that complements a broader performance build rather than simply sitting at the end of a spec sheet.\u003c\/p\u003e\u003cp\u003eThe natural titanium surface finish keeps the aesthetic understated and technical. Unlike anodised aluminium alternatives that rely on colour contrast, this variant lets the material speak for itself — the hallmark of a professional factory racing look preferred by riders who build bikes to perform rather than to pose.\u003c\/p\u003e\u003ch2\u003eA Visual and Functional Upgrade at the Swingarm\u003c\/h2\u003e\u003cp\u003eOn the Panigale V4, the rear wheel nut is a focal point of the exposed rear end. The single-sided swingarm frames it prominently, making it one of the first details a discerning eye notices at a paddock or trackday. The K-Bike DM48x1.5TIT introduces a motorsport-grade presence to that area, pairing seamlessly with carbon bodywork, titanium bolt kits, billet racing brackets and other premium add-on parts that characterise a thoroughly developed track machine.\u003c\/p\u003e\u003cp\u003eWhether the build is a dedicated circuit weapon or a road bike with serious track intentions, this nut installs directly in place of the standard Ducati unit, requires no modification, and signals the level of attention applied to every component on the machine.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThe K-Bike Titanium Rear Wheel Nut DM48x1.5TIT is designed to fit the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale V4 — model years 2018 to 2024\u003c\/li\u003e\n\u003cli\u003eDucati Panigale V4 S — model years 2018 to 2024\u003c\/li\u003e\n\u003cli\u003eDucati Panigale V4 R — model years 2018 to 2024\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThread specification: M48x1.5. Direct replacement for the original rear wheel nut — no adaptation required.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eK-Bike\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eDM48x1.5TIT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eTitanium Grade 5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003eapprox. 67.6 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour \/ Finish\u003c\/td\u003e\n\u003ctd\u003eTitanium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eMotorsport \/ Racing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread size\u003c\/td\u003e\n\u003ctd\u003eM48x1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"K-Bike","offers":[{"title":"Titanium","offer_id":53168673063178,"sku":"DM48x1.5TIT","price":142.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/DM48X1_5_titan_273a714b-4f6d-4c9f-8451-c50a716f04f9.png?v=1784300763"},{"product_id":"tgp-motoracing-titanium-front-axle-nut-m25x1-25","title":"TGP MotoRacing Titanium Front Axle Nut M25x1.25 – Ducati Panigale V4 \/ V4 S \/ V4 R (2018–2024)","description":"\u003cp\u003eMachined from aerospace-grade Titanium Grade 5, this front axle nut from TGP MotoRacing is a direct-fit upgrade for the Ducati Panigale V4, V4 S and V4 R that marries Italian superbike heritage with uncompromising engineering. The raw titanium finish catches the light with a natural, mineral lustre that sets the front wheel apart from standard hardware — a subtle but unmistakable signature for riders who care about every detail.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCNC-machined Titanium Grade 5 for a precise fit and consistent thread engagement across every installation\u003c\/li\u003e\n\u003cli\u003eM25x1.25 thread specification matches the OEM front axle of the Panigale V4 family exactly — no modification required\u003c\/li\u003e\n\u003cli\u003eTitanium Grade 5 alloy delivers exceptional strength-to-weight ratio and outstanding corrosion resistance, even under track conditions\u003c\/li\u003e\n\u003cli\u003eNatural titanium finish adds a distinctive, sport-premium aesthetic that complements the Panigale's purposeful styling\u003c\/li\u003e\n\u003cli\u003eReplaces heavy OEM steel hardware, contributing to unsprung weight reduction at the front wheel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign, Finish and Heritage\u003c\/h2\u003e\u003cp\u003eTGP MotoRacing components are born on the race circuit and refined for road-legal Ducatis. The titanium colour on this nut is not a coating or anodised layer — it is the inherent, self-passivating surface of Grade 5 titanium, aged to resist corrosion without any additional treatment. The result is a part that looks as purposeful as it is functional: a quiet nod to the Panigale's Superbike racing lineage, visible every time the wheel is removed for tyre changes or suspension setup.\u003c\/p\u003e\u003ch2\u003ePrecision Engineering\u003c\/h2\u003e\u003cp\u003eEvery unit is CNC-machined to tight tolerances, ensuring the 1.25 mm pitch threads engage cleanly and hold securely under the dynamic loads generated by hard braking and track use. Grade 5 titanium — the same alloy used in MotoGP and World Superbike paddocks — offers tensile strength comparable to high-quality steel at roughly 40 % less weight, making it the benchmark choice for weight-conscious upgrades that must never compromise safety.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis nut fits the front wheel axle of the following Ducati models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale V4 (2018–2024)\u003c\/li\u003e\n\u003cli\u003eDucati Panigale V4 S (2018–2024)\u003c\/li\u003e\n\u003cli\u003eDucati Panigale V4 R (2018–2024)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eThread size: M25x1.25\u003c\/li\u003e\n\u003cli\u003eThread pitch: 1.25 mm\u003c\/li\u003e\n\u003cli\u003eMaterial: Titanium Grade 5\u003c\/li\u003e\n\u003cli\u003eFinish: Natural titanium\u003c\/li\u003e\n\u003cli\u003eQuantity: 1 nut\u003c\/li\u003e\n\u003cli\u003eApplication: Front wheel axle nut\u003c\/li\u003e\n\u003cli\u003eFitment: Ducati Panigale V4 \/ V4 S \/ V4 R, 2018–2024\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TGP MotoRacing","offers":[{"title":"Default Title","offer_id":53168862593290,"sku":"70404","price":43.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/V4MutterVorne.png?v=1780818089"},{"product_id":"tgp-motoracing-titanium-rear-axle-nut-m48x1-5","title":"TGP MotoRacing Titanium Rear Axle Nut M48x1.5 – Ducati Panigale V4 \/ V4 S \/ V4 R (2018-2024)","description":"\u003cp\u003eEngineered for the demands of circuit riding, this Grade 5 titanium rear axle nut from TGP MotoRacing is the upgrade serious Panigale V4 racers reach for when every gram and every lap counts. CNC-machined to an M48x1.5 thread specification, it delivers the precision fitment and structural reliability your Ducati deserves — on track or on road.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eGrade 5 titanium construction: exceptional tensile strength combined with a significant weight reduction over a standard steel nut\u003c\/li\u003e\n\u003cli\u003eCNC-machined to M48x1.5 thread specification for exact, rattle-free fitment on the Ducati Panigale V4 rear axle\u003c\/li\u003e\n\u003cli\u003eSuitable for both left and right sides of the rear axle — one part covers both positions\u003c\/li\u003e\n\u003cli\u003eOutstanding corrosion resistance makes it an ideal choice for sustained track use, wet conditions, and long-term fitment\u003c\/li\u003e\n\u003cli\u003eNatural titanium finish adds a purposeful, race-ready aesthetic that complements the V4 platform\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuilt for the Track, Refined for the Road\u003c\/h2\u003e\u003cp\u003eAt the race level, unsprung and rotating mass matters. Swapping the heavy OEM rear axle nut for this TGP MotoRacing titanium piece is one of those small, cumulative changes that professional and club racers make as a matter of course. Grade 5 titanium — the same alloy used in aerospace and MotoGP components — offers a strength-to-weight ratio that mild steel simply cannot match, without any compromise in clamping force or fatigue resistance under repeated torque cycles.\u003c\/p\u003e\u003cp\u003eThe CNC milling process ensures thread tolerances are held tightly, so the nut seats cleanly against the axle, eliminates any risk of cross-threading during rapid wheel changes in the pit lane, and comes off just as smoothly when you need it to. The natural titanium colour is a byproduct of the material itself — not a coating that can chip or flake — so it stays looking sharp through season after season of use.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis rear axle nut fits the following Ducati models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale V4 — 2018 to 2024\u003c\/li\u003e\n\u003cli\u003eDucati Panigale V4 S — 2018 to 2024\u003c\/li\u003e\n\u003cli\u003eDucati Panigale V4 R — 2018 to 2024\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThread size M48x1.5. Compatible with both left and right rear axle positions on all listed models.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eTGP MotoRacing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread Size\u003c\/th\u003e\n\u003ctd\u003eM48x1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread Pitch\u003c\/th\u003e\n\u003ctd\u003e1.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eTitanium Grade 5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish \/ Colour\u003c\/th\u003e\n\u003ctd\u003eNatural titanium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturing Process\u003c\/th\u003e\n\u003ctd\u003eCNC-machined\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003ctd\u003eRear wheel axle nut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment\u003c\/th\u003e\n\u003ctd\u003eDucati Panigale V4 \/ V4 S \/ V4 R (2018–2024)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQuantity\u003c\/th\u003e\n\u003ctd\u003e1 nut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"TGP MotoRacing","offers":[{"title":"Default Title","offer_id":53168862757130,"sku":"70402","price":69.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/V4MutterHinten.png?v=1780818091"},{"product_id":"tgp-motoracing-titanium-frame-bolt-kit-ducati-panigale-v4-v4-s-v4-r","title":"TGP MotoRacing Titanium Frame Bolt Kit Ducati Panigale V4 \/ V4 S \/ V4 R (2018-2024) — Black M12","description":"\u003cp\u003eCrafted from aerospace-grade Titanium Grade 5 and finished in a deep, purposeful black, this TGP MotoRacing frame bolt kit is the detail that separates a showroom-standard Panigale from one built with genuine intent. Four CNC-machined titanium bolts replace the factory engine-mount fixings on the Ducati Panigale V4, V4 S and V4 R (2018–2024), delivering a visual and mechanical upgrade that is entirely at home on both the pit lane and the road.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eTitanium Grade 5 construction offers an exceptional strength-to-weight ratio, shedding grams from the frame without compromising structural integrity.\u003c\/li\u003e\n\u003cli\u003eCNC-machined to exact tolerances for a precise, rattle-free fitment on Ducati Panigale V4 \/ V4 S \/ V4 R frame mounting points.\u003c\/li\u003e\n\u003cli\u003eRolled threads — not cut — increase tensile strength and fatigue resistance compared with standard machined threads.\u003c\/li\u003e\n\u003cli\u003eBlack anodised finish presents a clean, contemporary aesthetic that complements the Panigale's aggressive lines and holds up against heat and weather.\u003c\/li\u003e\n\u003cli\u003eCollar diameter of 25.6 mm ensures correct load distribution across the mounting face, just as the OEM specification demands.\u003c\/li\u003e\n\u003cli\u003eA complete set of 4 bolts covers all frame-fixing positions in one kit — no part hunting, no mix of finishes.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign, Finish and Heritage\u003c\/h2\u003e\u003cp\u003eTGP MotoRacing has built its reputation supplying precision titanium fasteners to road and track riders who refuse to accept standard-issue hardware. The black finish on this kit is not merely cosmetic: it is a deliberate design choice that reads as understated and technical rather than flashy, ageing gracefully through track days and road miles alike. On the Panigale platform — a machine that blurs the line between homologation special and everyday superbike — hardware of this calibre is entirely appropriate.\u003c\/p\u003e\u003cp\u003eThe M12x44.3x1.25 bolt specification mirrors the OEM dimensions exactly, meaning installation requires no modification and torque settings remain unchanged. The rolled thread form, produced by cold-forming rather than cutting, leaves the grain structure of the titanium intact along the thread flanks, which is why this method is the preferred choice for safety-critical fastener applications in both motorsport and aerospace.\u003c\/p\u003e\u003ch2\u003ePerformance and Practicality\u003c\/h2\u003e\u003cp\u003eTitanium Grade 5 — the Ti-6Al-4V alloy — is approximately 45 percent lighter than an equivalent steel fastener while matching or exceeding its tensile strength. For a motorcycle as weight-sensitive as the Panigale V4 R, every gram saved at the frame level contributes to the overall balance the chassis engineers worked so hard to achieve. The inherent corrosion resistance of titanium also eliminates the seized-bolt frustration that plagues stainless or plated steel fasteners after a wet season, making future maintenance quicker and cleaner.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale V4 — 2018 to 2024\u003c\/li\u003e\n\u003cli\u003eDucati Panigale V4 S — 2018 to 2024\u003c\/li\u003e\n\u003cli\u003eDucati Panigale V4 R — 2018 to 2024\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThese bolts are designed as direct replacements for the OEM frame-mounting bolts. Always torque to the manufacturer's specified setting and use appropriate thread-locking compound where recommended by Ducati.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: TGP MotoRacing\u003c\/li\u003e\n\u003cli\u003eMaterial: Titanium Grade 5 (Ti-6Al-4V)\u003c\/li\u003e\n\u003cli\u003eThread size: M12 x 1.25\u003c\/li\u003e\n\u003cli\u003eBolt length: 44.3 mm\u003c\/li\u003e\n\u003cli\u003eCollar diameter: 25.6 mm\u003c\/li\u003e\n\u003cli\u003eThread form: Rolled (cold-formed)\u003c\/li\u003e\n\u003cli\u003eFinish \/ colour: Black\u003c\/li\u003e\n\u003cli\u003eQuantity: 4 bolts per kit\u003c\/li\u003e\n\u003cli\u003eFitment: Ducati Panigale V4 \/ V4 S \/ V4 R, 2018–2024\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TGP MotoRacing","offers":[{"title":"Default Title","offer_id":53168862855434,"sku":"70401","price":75.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/NEWSX0001.5655.png?v=1780818096"},{"product_id":"cnc-racing-titanium-front-axle-nut-ducati-panigale-v4-s-r-da396x","title":"CNC Racing Titanium Front Axle Nut Ducati Panigale V4\/S\/R (2025-2026) DA396X","description":"\u003cp\u003eWhen every gram and every safety margin counts, the CNC Racing DA396X titanium front axle nut delivers the confidence of aerospace-grade material combined with race-proven CNC precision — engineered specifically for the Ducati Panigale V4, V4 S, and V4 R in model years 2025 and 2026.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMachined from solid, full-billet titanium for a strength-to-weight ratio that outperforms standard steel hardware without compromising structural integrity at the front axle — the most safety-critical fastener on the wheel end.\u003c\/li\u003e\n\u003cli\u003eCNC-machined to exacting tolerances, ensuring consistent thread engagement and reliable torque retention lap after lap or kilometre after kilometre.\u003c\/li\u003e\n\u003cli\u003eOutstanding corrosion resistance inherent to titanium means the nut will not pit, seize, or corrode even after sustained exposure to water, road salt, or brake dust.\u003c\/li\u003e\n\u003cli\u003eNatural titanium finish gives the front axle area a distinctive, understated racing aesthetic that complements the Panigale V4's premium componentry.\u003c\/li\u003e\n\u003cli\u003ePrecise OEM fitment for 2025-2026 Ducati Panigale V4\/S\/R — a direct, no-modification replacement that meets the demands of both track and road use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSafety Through Material Science\u003c\/h2\u003e\u003cp\u003eTitanium's exceptional tensile strength makes it the material of choice for critical fasteners in MotoGP and World Superbike paddocks. CNC Racing's decision to machine the DA396X from solid titanium rather than surface-treating a lesser alloy means the strength runs through the entire cross-section of the nut — there is no coating to flake or corrode away from a structural surface. For a component that secures the front wheel to the fork, this is not a detail to overlook.\u003c\/p\u003e\u003ch2\u003ePrecision CNC Manufacture\u003c\/h2\u003e\u003cp\u003eEach DA396X is produced on multi-axis CNC machinery to tolerances that guarantee a clean, rattle-free fit on the Panigale V4 front axle thread. The result is a nut that installs without fuss, torques to specification with confidence, and removes cleanly at the next service — none of the galling or heat-seizure that can plague inferior aftermarket hardware.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThe CNC Racing DA396X titanium front axle nut is designed and validated for:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale V4 (model years 2025-2026)\u003c\/li\u003e\n\u003cli\u003eDucati Panigale V4 S (model years 2025-2026)\u003c\/li\u003e\n\u003cli\u003eDucati Panigale V4 R (model years 2025-2026)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: CNC Racing\u003c\/li\u003e\n\u003cli\u003ePart number: DA396X\u003c\/li\u003e\n\u003cli\u003eMaterial: solid full-billet titanium\u003c\/li\u003e\n\u003cli\u003eFinish: natural titanium\u003c\/li\u003e\n\u003cli\u003eManufacture: CNC-machined from solid\u003c\/li\u003e\n\u003cli\u003eFits: Ducati Panigale V4\/S\/R (2025-2026)\u003c\/li\u003e\n\u003cli\u003eApplication: front axle nut\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CNC Racing","offers":[{"title":"Default Title","offer_id":53169020829962,"sku":"DA396X","price":80.33,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/DA396.png?v=1780819309"},{"product_id":"gilles-acm-titanium-axle-nut-m25-x-1-5-aprilia-rsv4-2018-2020","title":"Gilles ACM Titanium Axle Nut M25 x 1.5 Aprilia RSV4 (2018-2020)","description":"\u003cp\u003eOn an RSV4 1000 RR or RF of 2018 to 2020, owners who ride on track look at every fastener. Gilles lists its ACM titanium axle nut with M25 x 1.5 thread for this model, machined from Ti6Al4V and weighing about 20 grams according to the manufacturer.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eM25 x 1.5 thread\u003c\/li\u003e\n\u003cli\u003eTitanium Ti6Al4V\u003c\/li\u003e\n\u003cli\u003eAbout 20 g, according to Gilles\u003c\/li\u003e\n\u003cli\u003ePin-lock: a plastic pin locks the nut against loosening\u003c\/li\u003e\n\u003cli\u003eThe plastic pin adapts to the thread in shape and force\u003c\/li\u003e\n\u003cli\u003eNo registration required, according to Gilles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePin-lock security\u003c\/h2\u003e\n\u003cp\u003eInstead of a split pin or a nylon insert, the ACM uses a plastic pin that adapts to the thread in shape and force. Gilles describes the result as highly secure against loosening.\u003c\/p\u003e\n\u003ch2\u003eCheck before you order\u003c\/h2\u003e\n\u003cp\u003eGilles lists the M25 size for the RSV4 of type KE1. Compare the thread of your original nut with the size shown here, and tighten the ACM to the torque Aprilia specifies for that joint.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eGilles states that no TÜV report is required for the ACM nut, and lists it as free of registration on the Aprilia RSV4. Nothing is entered in the vehicle documents; correct torque is what matters.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eOne Gilles ACM titanium safety axle nut, M25 x 1.5, with the pin-lock locking pin.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eClean the thread, fit the ACM with a standard hexagon socket and tighten it to the torque the motorcycle manufacturer specifies for that joint. If it is the rear axle nut, set the chain first.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Gilles Tooling\u003c\/li\u003e\n\u003cli\u003eSeries: ACM\u003c\/li\u003e\n\u003cli\u003ePart number: ACM-25-15\u003c\/li\u003e\n\u003cli\u003eType: Safety axle nut with pin-lock\u003c\/li\u003e\n\u003cli\u003eThread: M25 x 1.5\u003c\/li\u003e\n\u003cli\u003eMaterial: Titanium Ti6Al4V\u003c\/li\u003e\n\u003cli\u003eWeight: About 20 g (Gilles)\u003c\/li\u003e\n\u003cli\u003eTool: Standard hexagon socket, size depends on the nut\u003c\/li\u003e\n\u003cli\u003eFitment: Aprilia RSV4 (2018–2020)\u003c\/li\u003e\n\u003cli\u003eRoad approval: Not required (Gilles)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gilles Tooling","offers":[{"title":"Default Title","offer_id":53780263207178,"sku":"ACM-25-15","price":86.64,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ACM-25-15_1.png?v=1789985449"},{"product_id":"gilles-acm-titanium-axle-nut-m25-x-1-5-aprilia-rsv4-1100-2025-2025","title":"Gilles ACM Titanium Axle Nut M25 x 1.5 Aprilia RSV4 1100 (2025-2025)","description":"\u003cp\u003eFor the RSV4 1100 of type XP, built in 2025, Gilles lists the ACM titanium axle nut in M25 x 1.5. It is machined from Ti6Al4V, the titanium alloy used widely in aerospace, and it suits a bike that was designed around the circuit.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eM25 x 1.5 thread\u003c\/li\u003e\n\u003cli\u003eAbout 20 g, according to Gilles\u003c\/li\u003e\n\u003cli\u003ePin-lock: a plastic pin locks the nut against loosening\u003c\/li\u003e\n\u003cli\u003eThe plastic pin adapts to the thread in shape and force\u003c\/li\u003e\n\u003cli\u003eFits with a standard hexagon socket\u003c\/li\u003e\n\u003cli\u003eNo registration required, according to Gilles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eOnly the XP\u003c\/h2\u003e\n\u003cp\u003eGilles' list names the 2025 type XP for this nut. For RSV4 1100s built earlier, please ask us before ordering.\u003c\/p\u003e\n\u003ch2\u003eA titanium highlight\u003c\/h2\u003e\n\u003cp\u003eGilles calls the ACM a visual highlight. Its bare titanium surface, marked with the Gilles logo, stands out next to black anodised parts.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eAccording to Gilles, the ACM titanium nut does not require any approval on the Aprilia RSV4 1100: no TÜV report and no entry in the papers. Tighten it to the torque the motorcycle manufacturer specifies for the joint.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eOne Gilles ACM titanium safety axle nut, M25 x 1.5, with the pin-lock locking pin.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eUse a torque wrench and the manufacturer's value for the joint the nut closes. On a rear axle, adjust and align the chain before the final tightening.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Gilles Tooling\u003c\/li\u003e\n\u003cli\u003eSeries: ACM\u003c\/li\u003e\n\u003cli\u003ePart number: ACM-25-15\u003c\/li\u003e\n\u003cli\u003eType: Safety axle nut with pin-lock\u003c\/li\u003e\n\u003cli\u003eThread: M25 x 1.5\u003c\/li\u003e\n\u003cli\u003eMaterial: Titanium Ti6Al4V\u003c\/li\u003e\n\u003cli\u003eWeight: About 20 g (Gilles)\u003c\/li\u003e\n\u003cli\u003eTool: Standard hexagon socket, size depends on the nut\u003c\/li\u003e\n\u003cli\u003eFitment: Aprilia RSV4 1100 (2025–2025)\u003c\/li\u003e\n\u003cli\u003eRoad approval: Not required (Gilles)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gilles Tooling","offers":[{"title":"Default Title","offer_id":53780263567626,"sku":"ACM-25-15","price":86.64,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ACM-25-15_1_4a51210d-24ec-4845-98a2-196a3a2dcf74.png?v=1789985453"},{"product_id":"gilles-acm-titanium-axle-nut-m25-x-1-5-aprilia-rsv4-factory-2025-2025","title":"Gilles ACM Titanium Axle Nut M25 x 1.5 Aprilia RSV4 FACTORY (2025-2025)","description":"\u003cp\u003eA Factory with forged wheels and semi-active Öhlins deserves hardware to match, and titanium is the logical material. The Gilles ACM titanium axle nut for the Aprilia RSV4 Factory of 2025, type XP, has an M25 x 1.5 thread.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eM25 x 1.5 thread\u003c\/li\u003e\n\u003cli\u003ePin-lock: a plastic pin locks the nut against loosening\u003c\/li\u003e\n\u003cli\u003eThe plastic pin adapts to the thread in shape and force\u003c\/li\u003e\n\u003cli\u003eFits with a standard hexagon socket\u003c\/li\u003e\n\u003cli\u003eTitanium Ti6Al4V\u003c\/li\u003e\n\u003cli\u003eNo registration required, according to Gilles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLighter than steel\u003c\/h2\u003e\n\u003cp\u003eTitanium offers strength similar to good steel at a little over half the density. Gilles puts the ACM at about 20 grams.\u003c\/p\u003e\n\u003ch2\u003eLocking without a split pin\u003c\/h2\u003e\n\u003cp\u003eThe pin-lock system relies on a plastic pin that grips the thread, so the nut stays where it was torqued.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eNo registration required, says Gilles: the ACM nut replaces the standard nut on the Aprilia RSV4 FACTORY without an inspection and without a TÜV report. Use a torque wrench and the manufacturer's value.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eA single ACM axle nut in titanium Ti6Al4V, thread M25 x 1.5, pin-lock included.\u003c\/p\u003e\n\u003ch2\u003eFitting\u003c\/h2\u003e\n\u003cp\u003eFit the nut by hand, then bring it to the specified torque with a standard hexagon socket; the spanner size depends on the nut diameter. Check the joint again after the first ride.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Gilles Tooling\u003c\/li\u003e\n\u003cli\u003eSeries: ACM\u003c\/li\u003e\n\u003cli\u003ePart number: ACM-25-15\u003c\/li\u003e\n\u003cli\u003eType: Safety axle nut with pin-lock\u003c\/li\u003e\n\u003cli\u003eThread: M25 x 1.5\u003c\/li\u003e\n\u003cli\u003eMaterial: Titanium Ti6Al4V\u003c\/li\u003e\n\u003cli\u003eWeight: About 20 g (Gilles)\u003c\/li\u003e\n\u003cli\u003eTool: Standard hexagon socket, size depends on the nut\u003c\/li\u003e\n\u003cli\u003eFitment: Aprilia RSV4 FACTORY (2025–2025)\u003c\/li\u003e\n\u003cli\u003eRoad approval: Not required (Gilles)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gilles Tooling","offers":[{"title":"Default Title","offer_id":53780263731466,"sku":"ACM-25-15","price":86.64,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ACM-25-15_1_7b810aa6-95fa-4443-bf4a-d096a5c63676.png?v=1789985458"}],"url":"https:\/\/inter-pace.com\/collections\/screws-chassis.oembed","provider":"Inter-Pace","version":"1.0","type":"link"}