{"title":"Plastic Bike","description":"\u003cp\u003eExplore the complete range of \u003cstrong\u003ePlastic Bike\u003c\/strong\u003e race fairings \u0026amp; carbon fairing parts at Inter-Pace. Every Plastic Bike item is 100% genuine and built to race-grade standards, with fast shipping across Europe and dedicated rider support. Browse all 9+ Plastic Bike products below.\u003c\/p\u003e","products":[{"product_id":"front-verkleidungsset-carbon-plasticbike-ducati-panigale-v2","title":"Plastic Bike Carbon Front Fairing Set Ducati Panigale V2 955 (2020-2024)","description":"\u003cp\u003ePurpose-built for track use, this Plastic Bike carbon front fairing set is engineered exclusively for motorsport competition — carrying no road homologation so every gram of weight saved and every layer of carbon goes towards performance, not compromise. Fitted to the Ducati Panigale V2 955 from 2020 to 2024, it arrives with all mounting hardware included so you can bolt up and head to the pitlane.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eTrack-only construction: no type approval (ABE), developed and tested exclusively under race conditions for maximum durability and structural integrity at speed.\u003c\/li\u003e\n\u003cli\u003e100% carbon fibre throughout — lightweight yet exceptionally rigid, delivering outstanding protection with minimal mass added to the front end.\u003c\/li\u003e\n\u003cli\u003eUV-resistant and weatherproof finish ensures the carbon retains its appearance session after session, regardless of conditions.\u003c\/li\u003e\n\u003cli\u003ePrecision fitment engineered specifically for the Ducati Panigale V2 955 (2020–2024) — no modification required for a clean, gap-free installation.\u003c\/li\u003e\n\u003cli\u003eIncludes a DZUS quick-release fitting kit, making fairing removal between sessions fast and tool-free.\u003c\/li\u003e\n\u003cli\u003eAvailable in Carbon Matt (smooth matte clear-coated finish) or Carbon Raw (unpainted, unground natural carbon surface — note: the raw variant has an intentionally rough texture, not a polished surface).\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat the Set Includes\u003c\/h2\u003e\u003cp\u003eThis is a comprehensive front fairing set covering all primary bodywork panels. The air intake is produced in Avio Fiber — please note it is not carbon fibre. Every other panel in the set is 100% carbon.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFront mask (upper nose section)\u003c\/li\u003e\n\u003cli\u003eFront mask lower section\u003c\/li\u003e\n\u003cli\u003eLeft fairing side panel\u003c\/li\u003e\n\u003cli\u003eRight fairing side panel\u003c\/li\u003e\n\u003cli\u003eFront spoiler\u003c\/li\u003e\n\u003cli\u003eMounting bolts fitting kit with DZUS quick-release fasteners\u003c\/li\u003e\n\u003cli\u003eAir intake (Avio Fiber — not carbon)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCarbon Raw vs Carbon Matt — Which Finish to Choose\u003c\/h2\u003e\u003cp\u003eThe Carbon Matt variant features a smooth, clear-coated matte surface and is the finish shown in the product images. The Carbon Raw variant is supplied unpainted and unground, with a natural, slightly textured carbon surface optimised for pure race environments where finishing weight and cost are irrelevant. If a smooth surface is important to you, choose Carbon Matt.\u003c\/p\u003e\u003cp\u003ePart numbers: Carbon Raw — CCR1209-DZFIT + CC1211 | Carbon Matt — CCR1209-VER-DZFIT + CC1211\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eDucati Panigale V2 955 (2020, 2021, 2022, 2023, 2024)\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003ePlastic Bike\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eTrack \/ motorsport only — no road homologation (no ABE)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e100% carbon fibre (air intake: Avio Fiber)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish options\u003c\/td\u003e\n\u003ctd\u003eCarbon Raw (unpainted, natural texture) \/ Carbon Matt (matte clear coat)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number — Carbon Raw\u003c\/td\u003e\n\u003ctd\u003eCCR1209-DZFIT + CC1211\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number — Carbon Matt\u003c\/td\u003e\n\u003ctd\u003eCCR1209-VER-DZFIT + CC1211\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eDucati Panigale V2 955 (2020–2024)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFastening system\u003c\/td\u003e\n\u003ctd\u003eDZUS quick-release\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Plastic Bike","offers":[{"title":"Carbon Raw","offer_id":53167434072330,"sku":" CCR1209-DZFIT + CC1211","price":2299.0,"currency_code":"EUR","in_stock":true},{"title":"Carbon Matt","offer_id":53167434105098,"sku":" CCR1209-VER-DZFIT + CC1211","price":2799.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/V2SetPlasticBikeNormal.png?v=1780797779"},{"product_id":"komplettes-verkleidungsset-carbon-plasticbike-ducati-panigale-v2","title":"Complete Carbon Fairing Kit PlasticBike Ducati Panigale V2 955 (2020-2024)","description":"\u003cp\u003eA complete carbon fairing kit that transforms your Ducati Panigale V2 955 into a genuine track weapon — without the hassle of sourcing individual panels or compromising on fit. PlasticBike's full set covers every major panel position, arrives with a dedicated fitting kit, and is offered in two honest carbon finishes to suit your build and budget.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eComplete coverage: front mask, lower front section, left and right side panels, front spoiler, and rear fairing all included in one purchase\u003c\/li\u003e\n\u003cli\u003e100% carbon fibre construction throughout — high structural rigidity with minimal added weight\u003c\/li\u003e\n\u003cli\u003ePrecision-fit engineering for the Ducati Panigale V2 955 (2020-2024) — panels align correctly first time, reducing installation time on the paddock stand\u003c\/li\u003e\n\u003cli\u003eUV-resistant and weather-resistant finish holds its appearance across a full race season\u003c\/li\u003e\n\u003cli\u003eMotorsport-tested for durability and on-track performance under real racing conditions\u003c\/li\u003e\n\u003cli\u003eSupplied with a DZUS quick-release fitting kit, so panel changes between sessions are fast and tool-light\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTwo Finish Options — Choose What Works for You\u003c\/h2\u003e\u003cp\u003eThe Carbon Raw variant is supplied uncoated with a natural, unground carbon surface. It is designed specifically for motorsport use where weight saving and airflow matter more than cosmetics, and it gives you a blank canvas for any finish you choose to apply yourself.\u003c\/p\u003e\u003cp\u003eThe Carbon Matt variant carries a matte clear-coat over the weave, delivering a refined, consistent appearance straight out of the box — ideal if you want the track-ready carbon look without additional prep work.\u003c\/p\u003e\u003cp\u003eNote: product images show the Carbon Matt variant. The Carbon Raw variant has no smooth surface coat and will appear and feel distinctly different.\u003c\/p\u003e\u003ch2\u003eBuild Quality and Practical Use\u003c\/h2\u003e\u003cp\u003eEvery panel in this kit is manufactured from high-grade carbon fibre, keeping the set light enough not to affect power-to-weight performance while remaining rigid enough to withstand the physical demands of circuit riding. The air intake included in the kit is produced from Avio Fiber — not carbon — a deliberate material choice that optimises intake performance characteristics. The DZUS quick-release fasteners mean the full fairing can be removed and refitted rapidly between track sessions, which is one of the most practical day-to-day advantages of a dedicated race fairing kit over retained OEM bodywork.\u003c\/p\u003e\u003cp\u003eThis set carries no type approval (ABE) and is intended exclusively for motorsport and closed-circuit use. It is not approved for road use on public highways.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis fairing kit is engineered specifically for the Ducati Panigale V2 955 across all model years from 2020 to 2024. No modification or adaptation is required for a correct fit on bikes within this year range.\u003c\/p\u003e\u003ch2\u003ePart Numbers\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCarbon Raw: CCR1209-DZFIT + CCR1251 + CC1211\u003c\/li\u003e\n\u003cli\u003eCarbon Matt: CCR1209-VER-DZFIT + CCR1251-VER + CC1211\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003ePlasticBike\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment\u003c\/th\u003e\n\u003ctd\u003eDucati Panigale V2 955 (2020-2024)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e100% carbon fibre (air intake: Avio Fiber)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish options\u003c\/th\u003e\n\u003ctd\u003eCarbon Raw (uncoated, natural surface) \/ Carbon Matt (matte clear-coat)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFasteners\u003c\/th\u003e\n\u003ctd\u003eDZUS quick-release fitting kit included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoad approval\u003c\/th\u003e\n\u003ctd\u003eNone — track and motorsport use only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number (Raw)\u003c\/th\u003e\n\u003ctd\u003eCCR1209-DZFIT + CCR1251 + CC1211\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number (Matt)\u003c\/th\u003e\n\u003ctd\u003eCCR1209-VER-DZFIT + CCR1251-VER + CC1211\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Plastic Bike","offers":[{"title":"Carbon Raw","offer_id":53167434498314,"sku":"CCR1209-DZFIT_ CCR1251_CC1211","price":2699.0,"currency_code":"EUR","in_stock":true},{"title":"Carbon Matt","offer_id":53167434531082,"sku":"CCR1209-VER-DZFIT_CCR1251-VER_CC1211","price":3339.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/V2SetPlasticBike.png?v=1780797783"},{"product_id":"heckverkleidung-carbon-plasticbike-ducati-panigale-v2","title":"PlasticBike Carbon Tail Fairing for Ducati Panigale V2 955 (2020-2024)","description":"\u003cp\u003eConstructed from 100% genuine carbon fibre, the PlasticBike tail fairing for the Ducati Panigale V2 955 represents the kind of uncompromising build quality that separates serious track machinery from the rest. Each piece is individually crafted to deliver exceptional rigidity with minimal mass — a direct upgrade over the factory plastic unit and a fitting match for the V2 955's performance character.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e100% carbon fibre construction — exceptional strength-to-weight ratio without adding unnecessary mass to the rear end\u003c\/li\u003e\n\u003cli\u003ePrecision fit engineered specifically for the Ducati Panigale V2 955 (2020–2024) — direct replacement with no modification required\u003c\/li\u003e\n\u003cli\u003eTwo distinct finish options: Carbon Matt for a refined, polished-matte appearance and Carbon Raw for an authentic, uncoated race aesthetic\u003c\/li\u003e\n\u003cli\u003eUV and weather resistant — the material retains its structural integrity and appearance under sustained track and outdoor use\u003c\/li\u003e\n\u003cli\u003eDeveloped and validated in motorsport conditions for optimal performance under racing stress\u003c\/li\u003e\n\u003cli\u003eRace-only component — no type approval (ABE); not road-legal for use on public highways\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFinish Options Explained\u003c\/h2\u003e\u003cp\u003eThe Carbon Matt variant features a smooth matte lacquer finish that gives the tail section a purposeful, premium look — ideal for riders who want the weight advantage of carbon with a clean visual result. The Carbon Raw variant is supplied unpainted and uncoated, with the natural carbon weave surface left intentionally unsmoothed. This is the choice of dedicated track riders who prioritise pure weight reduction and race-bred aesthetics over a finished appearance. Part number for both variants: CCR1251-VER.\u003c\/p\u003e\u003ch2\u003eConstruction and Material Quality\u003c\/h2\u003e\u003cp\u003ePlasticBike produces each tail fairing using high-grade carbon fibre layups, resulting in a part that is simultaneously rigid and extremely light. The absence of conventional plastic means the component does not flex or distort under the thermal and mechanical loads typical of track use. The weave pattern is consistent and well-defined across the surface, reflecting a manufacturing process that prioritises visual as well as structural quality. Whether you choose the matte or raw finish, what arrives is a piece of fairing built to the standard the Panigale V2 955 deserves.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis tail fairing is designed exclusively for the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDucati Panigale V2 955 — model years 2020, 2021, 2022, 2023, 2024\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eIt is a direct-fit replacement developed from the original fairing geometry, ensuring correct panel gaps and mounting alignment without the need for drilling, trimming or adaptation.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003ePlasticBike\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e100% carbon fibre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish options\u003c\/td\u003e\n\u003ctd\u003eCarbon Matt (matte lacquer), Carbon Raw (unpainted, uncoated)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eCCR1251-VER\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eDucati Panigale V2 955 (2020–2024)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntended use\u003c\/td\u003e\n\u003ctd\u003eMotorsport \/ track use only — not road-legal (no ABE type approval)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUV resistance\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Plastic Bike","offers":[{"title":"Carbon Raw","offer_id":53167434727690,"sku":"CCR1251","price":440.3,"currency_code":"EUR","in_stock":true},{"title":"Carbon Matt","offer_id":53167434760458,"sku":"CCR1251-VER","price":582.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/HeckV2.png?v=1780797785"},{"product_id":"front-rennverkleidung-set-plasticbike-aprilia-rsv4-rr-1100-factory-25-26","title":"PlasticBike Front Race Fairing Fibreglass Set – Aprilia RSV4 \/ RR \/ 1100 Factory (2025–2026)","description":"\u003cp\u003eBuilt for serious track use on the 2025–2026 Aprilia RSV4, RR and 1100 Factory, the PlasticBike fibreglass front race fairing set gives you a complete, service-friendly front-end package engineered to survive the demands of trackdays and club racing alike. Every panel is made from GRP fibreglass — the proven, repairable material trusted by racers who actually push hard rather than preserve their kit — and the set ships with DZUS quick-release fasteners as standard so pit-lane panel removal takes seconds, not minutes.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eComplete front fairing set in one kit: front upper fairing, left side panel, right side panel and belly spoiler included\u003c\/li\u003e\n\u003cli\u003eDZUS quick-release fasteners included for rapid pit-lane assembly and removal\u003c\/li\u003e\n\u003cli\u003eGRP fibreglass construction offers an excellent strength-to-weight ratio and is straightforward to repair after track contact\u003c\/li\u003e\n\u003cli\u003ePrimed surface accepts paint and vinyl livery easily — ideal as a blank canvas for custom race graphics\u003c\/li\u003e\n\u003cli\u003eOptional winglets (PRT11117-DX right, PRT11117-SX left) available separately to complete a full aerodynamic setup\u003c\/li\u003e\n\u003cli\u003ePrecise fitment engineered specifically for the 2025–2026 model year RSV4 platform\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhy GRP Fibreglass for the Track\u003c\/h2\u003e\u003cp\u003eFibreglass has been the material of choice for race fairings across all categories of circuit sport for decades, and for good reason. Unlike OEM ABS plastic, GRP can be repaired with widely available materials in any workshop or paddock garage — a stone chip or a low-speed tip-over does not write off the panel. The material is also rigid enough to hold its shape under the aerodynamic loads generated at track speeds, yet light enough to keep the bike's frontal mass where it belongs.\u003c\/p\u003e\u003cp\u003eFor riders who want a purpose-built track fairing that survives a full season of hard use, fibreglass remains the practical, cost-effective choice.\u003c\/p\u003e\u003ch2\u003eFitment Notes and Installation\u003c\/h2\u003e\u003cp\u003eRace fairings are designed exclusively for closed-circuit competition and trackday use. Unlike OEM bodywork, a degree of fitting work is normal and expected before final installation. You should anticipate minor operations such as drilling mounting holes, trimming panel edges and adjusting gap tolerances to achieve the correct fit on your specific machine.\u003c\/p\u003e\u003cp\u003eExhaust routing in particular can affect the belly spoiler and lower section clearances. Depending on the exhaust system fitted to your RSV4, additional clearance work may be required in the belly spoiler area. A full dry-fit trial before any painting or graphics application is mandatory — this is standard practice with all race-spec bodywork and ensures a clean, rattle-free result.\u003c\/p\u003e\u003ch2\u003eOptional Winglet Upgrade\u003c\/h2\u003e\u003cp\u003eFor a complete aerodynamic racing setup, PlasticBike winglets are available separately and designed to integrate directly with this fairing set:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRight winglet: PRT11117-DX\u003c\/li\u003e\n\u003cli\u003eLeft winglet: PRT11117-SX\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe kit is offered in two variants — without winglets or with winglets pre-fitted — so you can choose the configuration that best suits your build from the outset.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAprilia RSV4 (2025–2026)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 RR (2025–2026)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 1100 Factory (2025–2026)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eVTR11117-DZFIT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003ePlasticBike\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eFibreglass (GRP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKit contents\u003c\/td\u003e\n\u003ctd\u003eFront fairing, left side panel, right side panel, belly spoiler\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFasteners\u003c\/td\u003e\n\u003ctd\u003eDZUS quick-release fasteners included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOptional winglets\u003c\/td\u003e\n\u003ctd\u003ePRT11117-DX (right), PRT11117-SX (left)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntended use\u003c\/td\u003e\n\u003ctd\u003eTrack \/ race use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Plastic Bike","offers":[{"title":"Without Winglets","offer_id":53168578527498,"sku":"VTR11117-DZFIT","price":934.15,"currency_code":"EUR","in_stock":true},{"title":"With Winglets","offer_id":53168578560266,"sku":"VTR11117-DZFIT + PRT11117-DX + PRT11117-SX","price":1053.15,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/RSV4KitPlasticBike.png?v=1780809015"},{"product_id":"komplettes-verkleidungsset-glasfaser-set-plasticbike-aprilia-rsv4-rr-1100-factory-25-26","title":"PlasticBike Complete Fibreglass Race Fairing Set – Aprilia RSV4 \/ RR \/ 1100 Factory (2025–2026)","description":"\u003cp\u003eWhen a half-hearted race conversion simply will not do, PlasticBike's complete fibreglass fairing set transforms your Aprilia RSV4, RR or 1100 Factory (2025–2026) into a coherent, purpose-built track machine from nose to tail. Drawing on PlasticBike's established heritage in competition bodywork, this kit unifies every major fairing panel — including a two-piece tail section — under a single, considered design language that looks as deliberate as it performs.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eComplete track fairing solution: front fairing, left and right side panels, chin spoiler and a two-piece tail section (VTR11118) all in one purchase.\u003c\/li\u003e\n\u003cli\u003eFibreglass (GRP) construction — the proven trackday material: robust, excellently paintable, and straightforward to repair after the inevitable track contact.\u003c\/li\u003e\n\u003cli\u003eDzus quick-release fasteners included, making panel removal between sessions fast and tool-light.\u003c\/li\u003e\n\u003cli\u003eOptional winglet upgrade available (PRT11117-DX right, PRT11117-SX left) for riders seeking an aerodynamic edge without replacing the core kit.\u003c\/li\u003e\n\u003cli\u003eService-oriented design with enough adjustability to accommodate different exhaust systems, brackets, and race peripherals specific to your build.\u003c\/li\u003e\n\u003cli\u003eDeveloped exclusively for the 2025–2026 model year RSV4 family, ensuring the closest possible panel geometry to the production bodywork.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFibreglass — The Racer's Choice\u003c\/h2\u003e\u003cp\u003eFibreglass reinforced plastic has been the go-to material for race fairings for decades, and for good reason. It absorbs minor impacts without shattering catastrophically, can be ground back and relaid after a slide, and accepts primer and paint with far less preparation than raw carbon. For a rider who genuinely uses the track rather than simply displaying the bike, a well-made GRP set offers a durability-to-cost ratio that is hard to beat.\u003c\/p\u003e\u003cp\u003eThe PlasticBike approach centres on a finish quality high enough to paint straight from the box — whether you choose a replica race livery or a clean single colour — and a panel thickness calibrated for stiffness without unnecessary weight.\u003c\/p\u003e\u003ch2\u003eWinglet Option\u003c\/h2\u003e\u003cp\u003eThe set is available either without winglets or with winglets integrated, letting you tailor the aerodynamic profile to your circuit and riding style. Winglets are also sold separately should you wish to add them later:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRight winglet: PRT11117-DX\u003c\/li\u003e\n\u003cli\u003eLeft winglet: PRT11117-SX\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment Notes — Read Before You Paint\u003c\/h2\u003e\u003cp\u003eRace fairings are engineered for track use, not showroom-floor perfection. As with all competition bodywork of this type, some fitting work should be expected:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDrilling, bracket adjustment, and minor edge trimming may be required to suit your specific setup.\u003c\/li\u003e\n\u003cli\u003eDepending on exhaust routing and header configuration, the chin spoiler area in particular may need minor clearancing — this is normal for aftermarket race bodywork.\u003c\/li\u003e\n\u003cli\u003eA dry-fit trial assembly before any paint or lacquer is applied is strongly recommended without exception.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAprilia RSV4 (2025–2026)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 RR (2025–2026)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 1100 Factory (2025–2026)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eVTR11117-DZFIT + VTR11118\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003ePlasticBike\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eFibreglass (GRP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTail section\u003c\/td\u003e\n\u003ctd\u003eTwo-piece — VTR11118\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFasteners\u003c\/td\u003e\n\u003ctd\u003eDzus quick-release (included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOptional winglets\u003c\/td\u003e\n\u003ctd\u003ePRT11117-DX (right), PRT11117-SX (left)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eAprilia RSV4 \/ RR \/ 1100 Factory 2025–2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Plastic Bike","offers":[{"title":"Without Winglets","offer_id":53168578625802,"sku":"VTR11117-DZFIT + VTR11118","price":1325.66,"currency_code":"EUR","in_stock":true},{"title":"With Winglets","offer_id":53168578658570,"sku":"VTR11117-DZFIT + VTR11118 + PRT11117-DX + PRT11117-SX","price":1444.66,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/RSV42526Set.png?v=1780809016"},{"product_id":"hinterer-kotflugel-short-carbon-plasticbike-ducati-panigale-v2","title":"Plastic Bike Short Carbon Rear Mudguard – Ducati Panigale V2 955 (2020-2024)","description":"\u003cp\u003eTrimming the tail of your Ducati Panigale V2 955 has never been this clean or this light. Plastic Bike's Short Carbon rear mudguard (part number CC1239) replaces the standard unit with a noticeably shorter, race-influenced profile that sharpens the bike's silhouette without any compromise on protection. Full carbon fibre construction keeps the mass penalty negligible while delivering the visual statement the Panigale V2 955 deserves.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSignificantly shorter than the original mudguard — delivers a stripped-back, aerodynamic tail line purpose-built for track use\u003c\/li\u003e\n\u003cli\u003e100% carbon fibre construction combines genuine structural rigidity with minimal weight addition over the standard part\u003c\/li\u003e\n\u003cli\u003ePrecision fit engineered specifically for the Ducati Panigale V2 955 (2020–2024) — no trimming, no adapting, no compromise\u003c\/li\u003e\n\u003cli\u003eUV and weather resistant finish resists fading and surface degradation even under sustained exposure to sun and wet conditions\u003c\/li\u003e\n\u003cli\u003eTested in real motorsport environments, validating both durability and performance under race conditions\u003c\/li\u003e\n\u003cli\u003eNo road homologation (ABE) — intended exclusively for track and competition use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuilt for the Track\u003c\/h2\u003e\u003cp\u003ePlastic Bike has long been a trusted name in carbon fibre bodywork for Italian superbikes, and the CC1239 rear mudguard reflects that pedigree. The weave is laid up to exacting standards, producing a component that feels as premium as it looks. The shorter profile is not merely aesthetic — it reduces the aerodynamic footprint at the rear of the machine, contributing to a cleaner package when the fairing is stripped for paddock prep or circuit homologation.\u003c\/p\u003e\u003cp\u003eBecause this mudguard carries no ABE approval, it is not permitted for use on public roads. It is designed for riders who operate their Panigale V2 955 exclusively on closed circuits or who are building a dedicated race or track-day machine.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis mudguard is designed to fit the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDucati Panigale V2 955 — model years 2020, 2021, 2022, 2023 and 2024\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eDirect OEM mounting points are retained for straightforward installation. Always verify your specific model year and variant before fitting any bodywork component.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003ePlastic Bike\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eCC1239\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eComponent\u003c\/th\u003e\n\u003ctd\u003eShort rear mudguard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e100% carbon fibre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment\u003c\/th\u003e\n\u003ctd\u003eDucati Panigale V2 955 (2020–2024)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoad Homologation\u003c\/th\u003e\n\u003ctd\u003eNone — track and competition use only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUV Resistance\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Plastic Bike","offers":[{"title":"Default Title","offer_id":53168784048394,"sku":"CC1239","price":301.07,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/V2Kotflgel.png?v=1780814995"},{"product_id":"tankschutz-protektoren-carbon-plasticbike-ducati-panigale-v2","title":"Plastic Bike Carbon Tank Guard Protectors for Ducati Panigale V2 955 (2020-2024)","description":"\u003cp\u003eEngineered specifically for track use on the Ducati Panigale V2 955, these Plastic Bike carbon tank guard protectors deliver race-proven impact protection without the weight penalty of conventional materials. Tested under genuine motorsport conditions, they safeguard your tank against scratches, knocks and abrasion while adding a purposeful, competition-grade aesthetic to your Panigale.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRace-use designation: no ABE road approval — developed and optimised exclusively for motorsport applications, ensuring every design decision prioritises track performance over road compliance.\u003c\/li\u003e\n\u003cli\u003e100% carbon fibre construction provides exceptional rigidity and impact resistance at a fraction of the weight of plastic or fibreglass alternatives.\u003c\/li\u003e\n\u003cli\u003ePrecision fit engineered to the exact geometry of the Ducati Panigale V2 955 OEM tank — no trimming, no filler gaps, no compromise.\u003c\/li\u003e\n\u003cli\u003eUV-resistant and weatherproof finish maintains its appearance under sustained sun exposure and varied circuit conditions.\u003c\/li\u003e\n\u003cli\u003eTested in real race situations to validate durability and performance under the harshest on-track stresses.\u003c\/li\u003e\n\u003cli\u003eLightweight design adds meaningful protection without any measurable increase to the motorcycle's overall mass.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eRace-Grade Material \u0026amp; Construction\u003c\/h2\u003e\u003cp\u003ePlastic Bike sources and lays up genuine 100% carbon fibre for these tank guards, not a carbon-look veneer over a plastic substrate. The result is a component that behaves like a structural part: absorbing and distributing impact energy rather than transferring it directly to the tank surface. The weave is sealed to resist fuel spillage, chain lubricant and the general chemical environment of a paddock. The finish is clean and consistent, complementing the aggressive lines of the Panigale V2 955 rather than fighting them.\u003c\/p\u003e\u003ch2\u003eMotorsport Use \u0026amp; Safety Note\u003c\/h2\u003e\u003cp\u003eThese protectors carry no ABE (general operating permit) for use on public roads in Germany or other jurisdictions requiring type approval. They are designed, tested and intended solely for closed-circuit motorsport use. Fitting them to a road-registered machine may affect insurance validity and legal road use — always verify local regulations before installation. For track-day riders and club racers, however, they represent a properly validated, race-tested solution from a specialist carbon manufacturer with a long history in Italian superbike accessories.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis tank guard set is a direct, model-specific fit for the following:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDucati Panigale V2 955 — model years 2020, 2021, 2022, 2023, 2024\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThese guards are not generic; they are cut and contoured to the Panigale V2 955 tank profile. Verify your model year before ordering to ensure correct fitment.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Plastic Bike\u003c\/li\u003e\n\u003cli\u003eMaterial: 100% carbon fibre\u003c\/li\u003e\n\u003cli\u003eFinish: UV-resistant, weatherproof carbon weave\u003c\/li\u003e\n\u003cli\u003eFitment: Ducati Panigale V2 955 (2020–2024)\u003c\/li\u003e\n\u003cli\u003eIntended use: Closed-circuit motorsport only\u003c\/li\u003e\n\u003cli\u003eRoad approval: No ABE — not approved for public road use\u003c\/li\u003e\n\u003cli\u003eProduct type: Tank guard protectors\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Plastic Bike","offers":[{"title":"Default Title","offer_id":53168784146698,"sku":"CC1232","price":196.35,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/V4tankguards.png?v=1780814997"},{"product_id":"schwingenabdeckung-carbon-plasticbike-ducati-panigale-v2","title":"PlasticBike Carbon Swingarm Cover for Ducati Panigale V2 955 (2020-2024)","description":"\u003cp\u003eWhen lap times matter and every gram counts, the PlasticBike carbon swingarm cover for the Ducati Panigale V2 955 delivers race-developed protection without the weight penalty of OEM plastics. Developed and validated under real motorsport conditions, this is the track-focused upgrade that completes a serious racing build.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConstructed from 100% carbon fibre for maximum structural rigidity at minimal weight — the exact combination demanded by competitive racing.\u003c\/li\u003e\n\u003cli\u003eRace-tested under genuine motorsport conditions, confirming durability and fit under the harshest on-track loads.\u003c\/li\u003e\n\u003cli\u003ePrecision fit engineered exclusively for the Ducati Panigale V2 955 (2020-2024), ensuring a clean, factory-tight installation.\u003c\/li\u003e\n\u003cli\u003eUV-resistant and weather-stable, maintaining appearance and integrity across varied track environments.\u003c\/li\u003e\n\u003cli\u003eDesigned for motorsport use — no road-use type approval (no ABE), making it the dedicated choice for circuit and paddock builds.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eRace-Grade Carbon Construction\u003c\/h2\u003e\u003cp\u003ePlasticBike has built its reputation supplying carbon bodywork to club racers and professional teams alike. This swingarm cover follows the same philosophy: pure carbon fibre, no compromise on finish, and a geometry that drops straight onto the Panigale V2 955 without modification. The result is a panel that protects the swingarm from debris and mechanical contact while visually elevating the overall race aesthetic of the bike.\u003c\/p\u003e\u003ch2\u003eTrack Performance \u0026amp; Durability\u003c\/h2\u003e\u003cp\u003eCarbon fibre at this application point does more than save weight — it resists the stone strike and chain debris that punishes conventional plastic covers across a race weekend. The panel retains its structural integrity and surface finish session after session, so you carry consistent protection from the first qualifying lap to the final chequered flag. UV stability means the weave stays sharp even through full summer test days in direct sunlight.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis swingarm cover is designed to fit the following motorcycle:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDucati Panigale V2 955 — model years 2020, 2021, 2022, 2023, 2024\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003ePlasticBike\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eCCR1236\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e100% carbon fibre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart type\u003c\/td\u003e\n\u003ctd\u003eSwingarm cover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eDucati Panigale V2 955 (2020-2024)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRoad-use approval\u003c\/td\u003e\n\u003ctd\u003eNone (motorsport \/ race use only — no ABE)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUV resistance\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Plastic Bike","offers":[{"title":"Default Title","offer_id":53168787128586,"sku":"CCR1236","price":306.31,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/SchwingeV2.png?v=1780815121"},{"product_id":"luftkanale-aviofiber-set-plasticbike-aprilia-rsv4-rr-1100-factory-25-26","title":"PlasticBike Aviofiber Air Duct Set Aprilia RSV4\/RR\/1100 Factory (2025-2026) – AVF11007","description":"\u003cp\u003eWhen a race-oriented front-end build demands more than skin-deep attention, the PlasticBike Aviofiber Air Duct Set AVF11007 delivers precisely managed airflow alongside a finish and construction philosophy drawn straight from the pitlane. Designed exclusively for the Aprilia RSV4, RR and 1100 Factory in 2025–2026 specification, this left-and-right duct pair reflects PlasticBike's long-standing commitment to parts that look as purposeful as they perform.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAviofiber construction — a racing-proven composite that balances low mass with the structural integrity needed to survive repeated assembly cycles and paddock vibration\u003c\/li\u003e\n\u003cli\u003eEngineered airflow management for the RSV4 platform, channelling air cleanly through the front fairing assembly\u003c\/li\u003e\n\u003cli\u003ePrecise fitment for the 2025–2026 RSV4\/RR\/1100 Factory — a direct response to the revised front-end geometry of this generation\u003c\/li\u003e\n\u003cli\u003eHeritage-led design language consistent with PlasticBike's race fairing ecosystem, making integration with full racing bodywork seamless\u003c\/li\u003e\n\u003cli\u003eSupplied as a matched left\/right pair (AVF11007), so both sides share the same material batch and finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAviofiber: Material with a Racing Pedigree\u003c\/h2\u003e\u003cp\u003eAviofiber has earned its place on the grid through a combination of properties that production plastics simply cannot match at this weight class. The material absorbs minor flex without cracking, shrugs off the heat cycles common in race paddocks, and accepts paint or wrap without extensive preparation — provided a trial fit is completed first, as PlasticBike recommend for all raw composite parts.\u003c\/p\u003e\u003cp\u003eThe result is a duct set that sits cleanly in the fairing aperture, contributes minimal unsprung and bodywork mass, and holds its geometry session after session rather than distorting under sustained thermal load.\u003c\/p\u003e\u003ch2\u003eWho This Set Is For\u003c\/h2\u003e\u003cp\u003eThe AVF11007 is aimed squarely at builders who refuse to compromise the technical quality of a front-end assembly. Whether you are constructing a dedicated track machine, refreshing a race fairing setup after a high-side, or simply replacing OEM ducts that no longer suit a custom bodywork configuration, this pair provides a clean, lightweight solution that integrates with the RSV4 platform without modification in most standard racing fairing configurations.\u003c\/p\u003e\u003cp\u003eNote: as with any raw racing composite part, minor fitting adjustments may be required depending on the specific fairing mask and front-end setup in use. A dry trial fit before any painting or wrapping is strongly recommended.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAprilia RSV4 — 2025, 2026\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 RR — 2025, 2026\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 1100 Factory — 2025, 2026\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eAVF11007\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003ePlasticBike\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eAviofiber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContents\u003c\/td\u003e\n\u003ctd\u003e1x left air duct, 1x right air duct\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eRace \/ Track\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eAprilia RSV4 \/ RR \/ 1100 Factory (2025–2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Plastic Bike","offers":[{"title":"Default Title","offer_id":53169042653450,"sku":"AVF11007","price":248.71,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/AirIntakesRSV425.png?v=1780820107"}],"url":"https:\/\/inter-pace.com\/collections\/plastic-bike.oembed","provider":"Inter-Pace","version":"1.0","type":"link"}