{"title":"Oxford","description":"\u003cp\u003eExplore the complete range of \u003cstrong\u003eOxford\u003c\/strong\u003e liquids at Inter-Pace. Every Oxford item is 100% genuine and built to race-grade standards, with fast shipping across Europe and dedicated rider support. Browse all 26+ Oxford products below.\u003c\/p\u003e","products":[{"product_id":"oxford-mint-korrosionsschutz-750ml","title":"Oxford Mint Corrosion Control Spray 750ml – Long-Term Rust Protection for Motorcycles, Bicycles \u0026 E-Bikes","description":"\u003cp\u003eWhen winter storage or a long wet commute threatens your bike's metalwork, the Oxford Mint Corrosion Control spray in the generously sized 750ml can gives you the coverage you need to protect every exposed surface in a single, unhurried session. A thin, invisible barrier forms on contact, locking out salt, moisture and environmental grime for up to six months at a stretch — all while leaving a pleasantly fresh mint scent rather than the harsh chemical smell of lesser products.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eExtra-large 750ml aerosol delivers whole-bike coverage from a single can, ideal for thorough seasonal treatment.\u003c\/li\u003e\n\u003cli\u003eForms an invisible, long-lasting protective film that repels water, road salt and damp air from all metal surfaces.\u003c\/li\u003e\n\u003cli\u003eTeflon-free and water-free formula — no silicone residue, no dilution, no compromise on corrosion resistance.\u003c\/li\u003e\n\u003cli\u003ePleasant mint fragrance makes application comfortable whether you're working in a garage or a confined space.\u003c\/li\u003e\n\u003cli\u003eCruelty-free: not tested on animals.\u003c\/li\u003e\n\u003cli\u003eReapplication every six months maintains continuous protection through seasonal changes and storage periods.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuilt for All-Day Comfort in the Garage\u003c\/h2\u003e\u003cp\u003eOne of the overlooked frustrations of bike maintenance is the accumulated fatigue of working with products that smell unpleasant or leave your hands feeling coated. Oxford's mint-scented formula means you can take your time treating every bracket, fastener, frame tube and chassis component without cutting the job short. The spray pattern is fine and controlled, so you deposit protection exactly where you want it without drenching adjacent plastics or rubber.\u003c\/p\u003e\u003ch2\u003eHow to Apply\u003c\/h2\u003e\u003cp\u003eFor best results, spray onto clean, dry metal surfaces and allow the formula to settle. Wipe away any excess with a clean cloth and allow to dry fully before riding or returning the bike to storage. Repeat every six months or after any prolonged exposure to salt spray or standing water.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eOxford Mint Corrosion Control is a universal product suitable for all metal components on motorcycles, scooters, bicycles, e-bikes and outdoor equipment. It is appropriate for use across all makes and model years including Aprilia, BMW, Ducati, Honda, Kawasaki, KTM, MV Agusta, Suzuki, Triumph, Yamaha and all other manufacturers. Suitable for frame sections, fasteners, exhaust headers, brake caliper carriers, wheel spindles, swingarms and any unpainted or bare metal surface.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Oxford\u003c\/li\u003e\n\u003cli\u003eProduct: Mint Corrosion Control Spray\u003c\/li\u003e\n\u003cli\u003eVolume: 750ml\u003c\/li\u003e\n\u003cli\u003eFormula: Teflon-free, water-free\u003c\/li\u003e\n\u003cli\u003eAnimal testing: none (cruelty-free)\u003c\/li\u003e\n\u003cli\u003eReapplication interval: every 6 months\u003c\/li\u003e\n\u003cli\u003eSuitable for: motorcycles, scooters, bicycles, e-bikes, outdoor equipment\u003c\/li\u003e\n\u003cli\u003eFragrance: mint\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oxford","offers":[{"title":"Default Title","offer_id":53168991797514,"sku":"05704429","price":20.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/CorusionControlLarge.png?v=1780818774"},{"product_id":"oxford-mint-kettenwachs-500ml","title":"Oxford Mint Chain Wax 500ml Spray – Long-Life Anti-Fling Formula for All Chain Types","description":"\u003cp\u003eWhen lap times and drivetrain reliability matter most, chain lubrication cannot be an afterthought. Oxford Mint Chain Wax delivers a long-lasting, anti-fling wax formula engineered to stay exactly where you apply it — protecting every link through full race weekends, back-to-back track days, and whatever weather the road throws at you.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAnti-fling formula clings to the chain under high-speed rotation, minimising wasted lubricant and keeping tyres and swingarms clean on track.\u003c\/li\u003e\n\u003cli\u003eLong-life wax barrier provides sustained protection against water, corrosion and the grime that accelerates chain wear on road and circuit alike.\u003c\/li\u003e\n\u003cli\u003eCompatible with all sealed chain types including O-ring, X-ring and Z-ring chains, making it suitable for every category of motorcycle from supersport to touring.\u003c\/li\u003e\n\u003cli\u003eReduces dirt adhesion significantly compared to oil-based lubricants, so your drivetrain stays cleaner between services.\u003c\/li\u003e\n\u003cli\u003ePleasant mint fragrance — a minor but welcome detail during pre-ride maintenance.\u003c\/li\u003e\n\u003cli\u003eNot tested on animals.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePerformance on Track and Road\u003c\/h2\u003e\u003cp\u003eThe wax-based carrier sets quickly after application, forming a dry-to-the-touch film that resists centrifugal fling-off even at sustained high rpm. On the racetrack this means less contamination of the rear tyre contact patch — a genuine safety and performance benefit that oil-heavy alternatives cannot match. On the road, the same properties translate to longer service intervals and a drivetrain that requires far less cleaning after wet or muddy riding.\u003c\/p\u003e\u003ch2\u003eApplication and Use\u003c\/h2\u003e\u003cp\u003eApply Oxford Mint Chain Wax to a clean, warm chain. For best results, pre-clean with Oxford Mint Chain Cleaner to remove old lubricant and road debris before coating. Work around the full chain run, allow the solvent carrier to evaporate and leave the wax layer to cure before riding. The 500ml aerosol canister delivers consistent, even coverage and contains enough product for numerous full applications.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis product is a universal chain lubricant suitable for all powered two-wheelers including motorcycles, scooters and e-bikes, as well as bicycles. It is compatible with O-ring, X-ring and Z-ring sealed chains across all makes and models — from Aprilia RSV4 and Ducati V4 R to BMW S1000RR, Kawasaki ZX-10 RR, Yamaha R1, Honda CBR 1000 RR-R, Suzuki GSX-R 1000, Triumph Daytona 765, MV Agusta F4, KTM RC 390 and beyond.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Oxford\u003c\/li\u003e\n\u003cli\u003eProduct line: Mint\u003c\/li\u003e\n\u003cli\u003eType: Chain wax lubricant spray\u003c\/li\u003e\n\u003cli\u003eVolume: 500ml aerosol canister\u003c\/li\u003e\n\u003cli\u003eChain compatibility: O-ring, X-ring, Z-ring and unsealed chains\u003c\/li\u003e\n\u003cli\u003eApplication: Motorcycle, scooter, bicycle, e-bike drivetrains\u003c\/li\u003e\n\u003cli\u003eKey properties: Anti-fling, water-resistant, long-life protection, low dirt adhesion\u003c\/li\u003e\n\u003cli\u003eAnimal testing: Not tested on animals\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oxford","offers":[{"title":"Default Title","offer_id":53168992157962,"sku":"05704430","price":14.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ChainWax.png?v=1780818775"},{"product_id":"oxford-mint-korrosionsschutz-500ml","title":"Oxford Mint Corrosion Control Spray 500ml – Long-Term Rust Protection for Motorcycles","description":"\u003cp\u003eReliable corrosion protection is the first line of defence for any motorcycle left standing through winter or stored in damp conditions. Oxford Mint Corrosion Control delivers a proven, invisible barrier against rust, salt and moisture — formulated without Teflon or water, and finished with a fresh mint scent that sets it apart from industrial-smelling alternatives.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eInvisible protective film bonds to metal surfaces, shielding against rust, road salt and persistent moisture\u003c\/li\u003e\n\u003cli\u003eTeflon-free and water-free formula — no residue build-up, no white staining on dark components\u003c\/li\u003e\n\u003cli\u003eAnimal-friendly formulation, meeting ethical standards without compromising performance\u003c\/li\u003e\n\u003cli\u003eIdeal for seasonal storage and winter lay-up: a single application lasts up to six months before reapplication is needed\u003c\/li\u003e\n\u003cli\u003eSuitable for motorcycles, bicycles, e-bikes, scooters and any bare or painted metal parts\u003c\/li\u003e\n\u003cli\u003eFresh mint scent makes application in enclosed spaces far more pleasant than solvent-heavy alternatives\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProtection You Can Trust\u003c\/h2\u003e\u003cp\u003eThe Oxford Mint Corrosion Control formula has been developed specifically for two-wheeled use, where exposed fasteners, frame sections, swingarms and exhaust headers are constantly under attack from salt-laden roads and wet weather. Unlike wax-based products that require buffing, this spray settles into an unseen film — simply apply, allow a brief dwell time, and the protection is in place. There is no need to wipe or polish, which makes it particularly practical when treating awkward areas like underframe rails, brake caliper brackets and wheel spoke beds.\u003c\/p\u003e\u003ch2\u003eSeasonal Storage and Year-Round Use\u003c\/h2\u003e\u003cp\u003eFor winter storage, a thorough application across all unpainted metal surfaces before the bike goes into the garage means it will emerge in spring without the surface corrosion that afflicts neglected machines. For year-round riders, reapplying every six months — typically at the start of winter and the start of the riding season — maintains continuous coverage. The 500 ml aerosol gives sufficient volume to treat an entire motorcycle generously, with product remaining for a bicycle or scooter alongside it.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eOxford Mint Corrosion Control is a universal product compatible with all motorcycle makes and models, including but not limited to: Aprilia RSV4, Ducati 848, 899, 959, 1199, 1299, BMW S1000RR, HP4, M1000RR, Honda CBR 600 RR, CBR 1000 RR, CBR 1000 RR-R, Kawasaki ZX-6R, ZX-10 R, ZX-10 RR, Suzuki GSX-R 600, GSX-R 750, GSX-R 1000, Triumph Daytona 675, Daytona 765, Street Triple 765, Yamaha R1, R6, R7, R9, KTM RC 390, RC8 1190, MV Agusta F3, F4 and all other makes. Also suitable for bicycles, e-bikes, scooters and general metal components.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Oxford\u003c\/li\u003e\n\u003cli\u003eProduct: Mint Corrosion Control\u003c\/li\u003e\n\u003cli\u003eVolume: 500 ml aerosol spray\u003c\/li\u003e\n\u003cli\u003eFormula: Teflon-free, water-free\u003c\/li\u003e\n\u003cli\u003eScent: Fresh mint\u003c\/li\u003e\n\u003cli\u003eApplication interval: Every 6 months for continuous protection\u003c\/li\u003e\n\u003cli\u003eSuitable for: Motorcycles, bicycles, e-bikes, scooters, metal parts\u003c\/li\u003e\n\u003cli\u003eAnimal-friendly formulation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oxford","offers":[{"title":"Default Title","offer_id":53168992223498,"sku":"05704428","price":15.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/CorusionControl.png?v=1780818776"},{"product_id":"oxford-mint-reinigerkonzentrat-bike-wash-5-l-kanister","title":"Oxford Mint Bike Wash Concentrate – 5 L Canister","description":"\u003cp\u003eFive litres of Oxford Mint Bike Wash Concentrate delivers the cleaning power of 20 litres of ready-to-use wash, making it one of the most cost-effective ways to keep any motorcycle, bicycle, e-bike or scooter spotless. The fresh mint-scented, biodegradable formula cuts through mud, dust, oil and road grime without attacking lacquer, metal or plastic surfaces.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHighly concentrated: 5 L makes up to 20 L of ready-to-use cleaner — ideal for frequent riders and workshops\u003c\/li\u003e\n\u003cli\u003eBiodegradable formula reduces environmental impact and plastic waste compared to buying pre-diluted wash\u003c\/li\u003e\n\u003cli\u003eEffective on painted surfaces, wheels, engine casings, metal components and forks\u003c\/li\u003e\n\u003cli\u003eLeaves a clean, glossy finish with a fresh mint fragrance after every wash\u003c\/li\u003e\n\u003cli\u003eGentle enough for regular use yet powerful enough to shift heavy road contamination\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEveryday Usability\u003c\/h2\u003e\u003cp\u003eWhether you are washing down your track bike after a circuit day or keeping your commuter clean through winter, a single 5 L canister goes a long way. Mix to the required dilution, apply with a wash mitt or brush, agitate and rinse — the concentrate does the hard work so you do not need to. For particularly stubborn grime, a slightly stronger mix tackles engine casings and wheel spokes without the need for a dedicated degreaser on every job.\u003c\/p\u003e\u003ch2\u003eSafe Application\u003c\/h2\u003e\u003cp\u003eOxford Mint Bike Wash Concentrate is formulated to be kind to the surfaces it contacts, including anodised aluminium, clearcoat lacquer, rubber seals and plastic trim. One important rule: never apply the product to hot surfaces or use it in direct sunlight, as rapid drying can leave residue and reduce effectiveness. Always rinse thoroughly with clean water after washing.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eUniversal product suitable for all motorcycle, scooter, bicycle and e-bike makes and models, including but not limited to: Aprilia, BMW, Ducati, Honda, Kawasaki, KTM, MV Agusta, Suzuki, Triumph, Yamaha and more. Compatible with all model years.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Oxford\u003c\/li\u003e\n\u003cli\u003eProduct: Mint Bike Wash Concentrate\u003c\/li\u003e\n\u003cli\u003eVolume: 5 L (makes up to 20 L ready-to-use)\u003c\/li\u003e\n\u003cli\u003eFormula: Biodegradable, concentrated\u003c\/li\u003e\n\u003cli\u003eFragrance: Fresh mint\u003c\/li\u003e\n\u003cli\u003eSuitable surfaces: Lacquer, wheels, engine casings, metal parts, forks, plastic\u003c\/li\u003e\n\u003cli\u003eApplication: Dilute before use; do not apply to hot surfaces or in direct sunlight\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oxford","offers":[{"title":"Default Title","offer_id":53168993468682,"sku":"05704440","price":62.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/BikeWashKanister5.png?v=1780818782"},{"product_id":"oxford-mint-reinigerkonzentrat-bike-wash-concentrate-1-l-flasche","title":"Oxford Mint Bike Wash Concentrate – 1 L Bottle","description":"\u003cp\u003eAfter a hard session on track or a long road run, grime, chain lube and brake dust cling to every surface. Oxford Mint Bike Wash Concentrate cuts through it all in one step — a powerful yet surface-safe cleaning formula that rinses clean without stripping lacquer, dulling anodised aluminium or attacking rubber seals.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConcentrated formula dilutes to suit light or heavy soiling — one bottle goes further than a standard ready-to-use wash\u003c\/li\u003e\n\u003cli\u003eBiodegradable, pH-balanced solution that is safe on paint, metal, wheels, forks, frames and plastic bodywork\u003c\/li\u003e\n\u003cli\u003eEffective against mud, road film, oil residue and brake dust — the everyday challenges of track days and road riding alike\u003c\/li\u003e\n\u003cli\u003eFresh mint scent makes post-ride cleaning a noticeably better experience\u003c\/li\u003e\n\u003cli\u003eVersatile across motorcycles, bicycles and e-bikes — a single product for every two-wheeled machine in the garage\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuilt for Riders Who Care About Finish\u003c\/h2\u003e\u003cp\u003eTrack bikes take a particular punishment: tyre marbles, brake dust, chain lube flung across the swingarm and hot exhaust residue baked onto headers. Oxford Mint Bike Wash Concentrate is formulated to address exactly this kind of heavy contamination without the aggressive solvents that can cloud screen plastics or lift decals. The biodegradable base means you can use it regularly — after every session — without worrying about cumulative damage to sensitive surfaces.\u003c\/p\u003e\u003cp\u003eThe concentrated format gives you control over dilution. Use it stronger for post-track clean-downs when the bike is genuinely filthy, or dilute further for a maintenance wash between events. Either way, the formula rinses away completely, leaving no streaky residue.\u003c\/p\u003e\u003ch2\u003eApplication Tips\u003c\/h2\u003e\u003cp\u003eApply to a cool, dry surface — never spray onto hot engine cases, headers or brake discs immediately after riding. Work panel by panel, allow the solution a brief dwell time to lift contamination, then rinse thoroughly with clean water. For best results, avoid direct sunlight during application to prevent premature drying and streaking.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eOxford Mint Bike Wash Concentrate is a universal cleaning product suitable for all motorcycle makes and models, including Aprilia RSV4, Ducati 1299 Panigale, BMW S1000RR, Honda CBR 1000 RR-R, Kawasaki ZX-10 RR, Suzuki GSX-R 1000, Triumph Daytona 765, Yamaha R1 and R6, MV Agusta F4, KTM RC 390 and RC8 1190, and many more. Equally at home on road bikes, track-prepared machines, bicycles and e-bikes.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Oxford\u003c\/li\u003e\n\u003cli\u003eProduct: Mint Bike Wash Concentrate\u003c\/li\u003e\n\u003cli\u003eVolume: 1 litre bottle\u003c\/li\u003e\n\u003cli\u003eFormula type: Concentrated\u003c\/li\u003e\n\u003cli\u003eBiodegradable: Yes\u003c\/li\u003e\n\u003cli\u003eScent: Mint\u003c\/li\u003e\n\u003cli\u003eSurface compatibility: Paint, metal, wheels, forks, frames, plastic\u003c\/li\u003e\n\u003cli\u003eApplication: Motorcycles, bicycles, e-bikes\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oxford","offers":[{"title":"Default Title","offer_id":53168994353418,"sku":"05704439","price":17.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/BikeWashFlasche1.png?v=1780818787"},{"product_id":"oxford-mint-motorradreiniger-bike-wash-1-l-flasche","title":"Oxford Mint Bike Wash Motorcycle Cleaner - 1 L Spray Bottle","description":"\u003cp\u003eReady-to-use straight from the bottle, the Oxford Mint Bike Wash delivers fast, thorough cleaning without compromising a single surface on your machine. Its biodegradable, cruelty-free formula is as considerate to the environment as it is to your paintwork, rubber seals, carbon fibre panels and polished alloy wheels — making it a responsible choice for riders who care about both their bike and the world they ride through.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBiodegradable formula — cruelty-free and environmentally responsible, safe for regular use at home or on the road\u003c\/li\u003e\n\u003cli\u003eSafe on all surfaces: lacquer, metal, plastic, rubber, carbon fibre and anodised components\u003c\/li\u003e\n\u003cli\u003eFoam spray head ensures even coverage, optimal cling and effective penetration of stubborn grime\u003c\/li\u003e\n\u003cli\u003eReady-to-use concentrate — spray on, rinse off, no dilution or mixing required\u003c\/li\u003e\n\u003cli\u003eFresh mint fragrance leaves a clean, pleasant finish after every ride\u003c\/li\u003e\n\u003cli\u003eAvailable in a 5 L refill canister for workshop or high-volume use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePerformance and Formulation\u003c\/h2\u003e\u003cp\u003eThe Oxford Mint Bike Wash uses a carefully balanced biodegradable detergent that cuts through road grime, mud and oily deposits in a single application. Unlike harsh solvents that can strip protective coatings or attack rubber seals, the formula has been developed specifically for motorcycle surfaces — including delicate carbon fibre bodywork, painted fairings, fork legs and alloy wheels. The result is a deep clean without any surface degradation, wash after wash.\u003c\/p\u003e\u003ch2\u003eEase of Use\u003c\/h2\u003e\u003cp\u003eThe 1-litre bottle comes fitted with a foam pump spray head, allowing you to apply the cleaner evenly across panels and components. The foam clings to vertical surfaces long enough to break down dirt before rinsing cleanly with water. There is no need for buckets, dilution ratios or specialist equipment — ideal for a quick turnaround at a trackday paddock or a thorough weekly clean in the garage.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eSuitable for use on any motorcycle, scooter or sports bike regardless of make or model year. Compatible surfaces include painted fairings, bare metal, anodised aluminium, stainless steel, chrome, rubber, plastic and carbon fibre components. Compatible with models from all major manufacturers including Aprilia, BMW, Ducati, Honda, Kawasaki, KTM, MV Agusta, Suzuki, Triumph and Yamaha across all model years.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Oxford\u003c\/li\u003e\n\u003cli\u003eProduct: Mint Bike Wash\u003c\/li\u003e\n\u003cli\u003eVolume: 1 litre\u003c\/li\u003e\n\u003cli\u003eApplication method: foam pump spray bottle\u003c\/li\u003e\n\u003cli\u003eFormula: biodegradable, cruelty-free\u003c\/li\u003e\n\u003cli\u003eReady to use: yes, no dilution required\u003c\/li\u003e\n\u003cli\u003eSafe on: lacquer, metal, plastic, rubber, carbon fibre, anodised aluminium\u003c\/li\u003e\n\u003cli\u003eFragrance: mint\u003c\/li\u003e\n\u003cli\u003eAlso available: 5 L refill canister\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oxford","offers":[{"title":"Default Title","offer_id":53168994386186,"sku":"05704410","price":10.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/BikeWash1.png?v=1780818788"},{"product_id":"oxford-mint-kettenreiniger-chain-cleaner-750ml","title":"Oxford Mint Chain Cleaner 750ml Spray Bottle","description":"\u003cp\u003eThe Oxford Mint Chain Cleaner in the 750ml workshop bottle delivers serious degreasing power with a formula that has been refined over years of real-world use. Engineered to cut through aged chain grease, oil and road grime in a single application, it carries the trusted Oxford Mint identity — a signature fresh mint fragrance that sets it apart from clinical, industrial-smelling alternatives and makes routine chain maintenance genuinely pleasant.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e750ml large-format spray bottle suited to workshop use, fleet maintenance and regular riders who clean their chain every few hundred miles\u003c\/li\u003e\n\u003cli\u003eHigh-performance spray formula dissolves stubborn deposits of old chain lubricant, road oil and grime quickly and thoroughly\u003c\/li\u003e\n\u003cli\u003eFully compatible with O-ring, X-ring and Z-ring chains — safe for all modern sealed-chain drivetrains\u003c\/li\u003e\n\u003cli\u003eSlow-evaporating formula gives the cleaner time to penetrate and lift contamination before it dries off\u003c\/li\u003e\n\u003cli\u003eNot tested on animals — a considered formulation that aligns with responsible manufacturing values\u003c\/li\u003e\n\u003cli\u003eFresh mint fragrance makes garage maintenance far more enjoyable than harsh solvent alternatives\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign, Finish and Heritage\u003c\/h2\u003e\u003cp\u003eOxford's Mint care range is built around a coherent design philosophy: products that work hard, smell good and look at home in a tidy garage. The 750ml bottle is part of that same considered identity — the distinctive mint-green livery and premium spray trigger are instantly recognisable on the workbench. Oxford has been producing motorcycle accessories and care products for decades, and the Mint chain care line represents the mature expression of that heritage: tried-and-tested chemistry in packaging designed for the serious home mechanic or professional workshop.\u003c\/p\u003e\u003ch3\u003eApplication and Compatibility\u003c\/h3\u003e\u003cp\u003eSpray liberally onto the chain, sprocket and swingarm area, allow the slow-evaporating formula to dwell, then brush off and wipe clean. The cleaner works effectively on motorcycle chains, bicycle chains and e-bike drivetrains. For best results, pair with Oxford Mint Chain Lube or Chain Wax after cleaning to restore lubrication and protection to the freshly cleaned drivetrain.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eUniversal fitment — suitable for use on all chain-driven motorcycles and bicycles. Compatible with O-ring, X-ring and Z-ring sealed chains as well as non-sealed chains. Appropriate for use on chain, front sprocket, rear sprocket and swingarm surfaces. Suitable for all makes and models including Aprilia, BMW, Ducati, Honda, Kawasaki, KTM, MV Agusta, Suzuki, Triumph and Yamaha across all model years.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Oxford\u003c\/li\u003e\n\u003cli\u003eProduct line: Mint Chain Care\u003c\/li\u003e\n\u003cli\u003eVolume: 750ml\u003c\/li\u003e\n\u003cli\u003eFormat: Spray bottle\u003c\/li\u003e\n\u003cli\u003eChain compatibility: O-ring, X-ring, Z-ring and non-sealed chains\u003c\/li\u003e\n\u003cli\u003eFragrance: Fresh mint\u003c\/li\u003e\n\u003cli\u003eSuitable for: Motorcycle, bicycle, e-bike drivetrains\u003c\/li\u003e\n\u003cli\u003eAnimal testing: Not tested on animals\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oxford","offers":[{"title":"Default Title","offer_id":53168995631370,"sku":"05704414","price":15.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ChainCleaner750png.png?v=1780818797"},{"product_id":"oxford-mint-klebstoffentferner-glue-seal-remover-200ml","title":"Oxford Mint Glue \u0026 Seal Remover Spray - 200ml","description":"\u003cp\u003eWhether you are swapping rim tape, removing old decals or cleaning up after a sealant job, the Oxford Mint Glue \u0026amp; Seal Remover makes light work of the task. This 200ml spray cuts through stubborn adhesive residue, rim tape glue, sealant deposits and sticker remnants without scratching paint, rubber or plastic — leaving surfaces clean, streak-free and ready for whatever comes next.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEffective formula dissolves adhesive residue, rim tape glue, sealant and sticker remnants quickly, eliminating the need for aggressive scrubbing.\u003c\/li\u003e\n\u003cli\u003eSafe on paint, rubber and plastic, making it suitable for use across fairings, wheels, frames and body panels.\u003c\/li\u003e\n\u003cli\u003eStreak-free finish means no second clean-up pass is required after application.\u003c\/li\u003e\n\u003cli\u003eCompact 200ml spray can delivers targeted application exactly where you need it — ideal for workshop or garage use.\u003c\/li\u003e\n\u003cli\u003ePleasant mint fragrance makes the job noticeably more agreeable compared to harsh chemical alternatives.\u003c\/li\u003e\n\u003cli\u003eNot tested on animals, reflecting Oxford's commitment to a more responsible product formulation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEveryday Usability\u003c\/h2\u003e\u003cp\u003eAdhesive residue has a habit of turning a straightforward maintenance job into a frustrating one. The Oxford Mint Glue \u0026amp; Seal Remover is designed to sit in your toolkit as a routine helper rather than a specialist last resort. The spray format keeps things tidy and precise — apply directly to the affected area, allow a moment for the formula to work, then wipe clean. Because the formula is gentle on common motorcycle and bicycle materials, you can use it confidently on lacquered panels, anodised wheels and rubber components without fear of damage.\u003c\/p\u003e\u003ch3\u003eVersatile Across Bicycles, E-Bikes and Motorcycles\u003c\/h3\u003e\u003cp\u003eThe remover is equally at home on a mountain bike rim as it is on a Ducati fairing or a Kawasaki frame. If you are fitting new graphics, re-taping a wheel or removing a windscreen sticker, this spray handles the residue efficiently so you can move straight to the next step. Always test on a small, inconspicuous area first before full application to confirm compatibility with your specific finish.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eUniversal product suitable for use on bicycles, e-bikes and motorcycles across all makes and model years. Compatible with painted surfaces, lacquered fairings, aluminium and alloy wheels, plastic body panels and rubber components. Suitable for use on all brands including Aprilia, BMW, Ducati, Honda, Kawasaki, KTM, MV Agusta, Suzuki, Triumph, Yamaha and more.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Oxford\u003c\/li\u003e\n\u003cli\u003eProduct name: Mint Glue \u0026amp; Seal Remover\u003c\/li\u003e\n\u003cli\u003eVolume: 200ml\u003c\/li\u003e\n\u003cli\u003eFormat: Spray can\u003c\/li\u003e\n\u003cli\u003eSuitable surfaces: Paint, rubber, plastic, lacquered panels, aluminium wheels\u003c\/li\u003e\n\u003cli\u003eApplication: Adhesive residue, rim tape glue, sealant residue, sticker removal\u003c\/li\u003e\n\u003cli\u003eFormula: Non-aggressive, mint scented, not tested on animals\u003c\/li\u003e\n\u003cli\u003eCompatibility: Bicycle, e-bike, motorcycle — universal\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oxford","offers":[{"title":"Default Title","offer_id":53168995959050,"sku":"05704436","price":9.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/OxfordGlueSealRemove.png?v=1780818799"},{"product_id":"oxford-mint-motorradreiniger-bike-wash-5-l-kanister","title":"Oxford Mint Bike Wash Motorcycle Cleaner - 5 L Canister","description":"\u003cp\u003eWhen pit lane prep and paddock standards matter, the Oxford Mint Bike Wash 5 L canister delivers the cleaning muscle to strip race-day grime, chain lube overspray and brake dust without ever threatening your paintwork, carbon bodywork or rubber seals. Ready to use straight from the canister — no dilution, no compromise.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eReady-to-use formula — no mixing required, pour and apply immediately for fast turnaround between sessions or service intervals.\u003c\/li\u003e\n\u003cli\u003eBiodegradable, animal-friendly formulation that is safe on paint, metal, rubber, plastic, carbon fibre and anodised aluminium.\u003c\/li\u003e\n\u003cli\u003eLeaves zero streaks or residue — ideal for finishing fairings, wheels and fork legs to a showroom standard.\u003c\/li\u003e\n\u003cli\u003eFresh mint fragrance makes extended workshop cleaning sessions noticeably more pleasant.\u003c\/li\u003e\n\u003cli\u003e5 L bulk format is purpose-built for high-volume users, race teams, garages and dedicated detailers.\u003c\/li\u003e\n\u003cli\u003eCompatible with foam lances and pressure washers as well as manual foam spray bottles.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTrack-Ready Cleaning Performance\u003c\/h2\u003e\u003cp\u003eAfter a track day, a bike accumulates a unique cocktail of contaminants — tyre rubber deposits, chain lubricant flung across the swingarm, brake dust baked onto wheel rims, and exhaust carbon on bodywork. Oxford Mint Bike Wash is formulated to cut through all of it in a single application. The surfactant chemistry works quickly to lift and suspend contamination so it rinses away cleanly, protecting the delicate finishes found on modern supersport machines.\u003c\/p\u003e\u003cp\u003eThe 5 L canister makes it practical to keep bulk stock in the workshop or race van. Decant into a 1 L foam pump bottle for pinpoint application on fairings and intricate engine casings, or connect directly to a foam lance on your pressure washer for full-bike coverage in seconds. Either way, the result is a spotless, streak-free finish ready for scrutineering or the next session.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eOxford Mint Bike Wash is a universal motorcycle cleaner suitable for all makes and models — from road-registered naked bikes through to full-specification race machines. It has been used successfully on the following platforms, among many others:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAprilia RSV4, RSV4 R, RSV4 RR, RSV4 RF, RSV4 1100, RSV4 1100 Factory, RS 660, RS 457, Tuono V4, V4 R, V4 S\u003c\/li\u003e\n\u003cli\u003eBMW S1000RR, M1000RR, HP4, HP4R\u003c\/li\u003e\n\u003cli\u003eDucati 848, 899, 959, 1199, 1199 S, 1199 R, 1299, 1299 S, Panigale V4, V4 S, V4 R\u003c\/li\u003e\n\u003cli\u003eHonda CBR 600 RR, CBR 1000 RR, CBR 1000 RR-R\u003c\/li\u003e\n\u003cli\u003eKawasaki ZX-6R, ZX-10R, ZX-10RR, ZX-4RR, Ninja 400\u003c\/li\u003e\n\u003cli\u003eKTM RC 390, RC8 1190, 990 RC R\u003c\/li\u003e\n\u003cli\u003eMV Agusta F3, F4\u003c\/li\u003e\n\u003cli\u003eSuzuki GSX-R 600, GSX-R 750, GSX-R 1000\u003c\/li\u003e\n\u003cli\u003eTriumph Daytona 675, Daytona 675 R, Daytona 765, Daytona 765 Moto2, Street Triple 765 R, Street Triple 765 RS\u003c\/li\u003e\n\u003cli\u003eYamaha R3, R6, R7, R9, R1, R1M\u003c\/li\u003e\n\u003cli\u003eAlso suitable for bicycles and e-bikes.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Oxford\u003c\/li\u003e\n\u003cli\u003eProduct: Mint Bike Wash\u003c\/li\u003e\n\u003cli\u003eVolume: 5 L canister\u003c\/li\u003e\n\u003cli\u003eFormula: Ready-to-use (no dilution required)\u003c\/li\u003e\n\u003cli\u003eComposition: Biodegradable, animal-friendly\u003c\/li\u003e\n\u003cli\u003eFragrance: Mint\u003c\/li\u003e\n\u003cli\u003eSafe on: Paint, metal, rubber, plastic, carbon fibre, anodised surfaces, wheels, forks\u003c\/li\u003e\n\u003cli\u003eApplication methods: Foam spray bottle, foam lance, pressure washer\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oxford","offers":[{"title":"Default Title","offer_id":53168995991818,"sku":"05704409","price":24.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/BikeWash.png?v=1780818799"},{"product_id":"oxford-mint-kettenreiniger-chain-cleaner-500ml","title":"Oxford Mint Chain Cleaner Spray 500ml - Chain Degreaser for O, X \u0026 Z-Ring Chains","description":"\u003cp\u003eKeeping your chain clean between services shouldn't be a chore, and with the Oxford Mint Chain Cleaner it isn't. This 500 ml aerosol delivers a powerful, fast-acting formula that cuts through chain grease, oil residue and road grime in one pass — leaving the chain, front sprocket and swingarm spotless and ready for fresh lubrication. At this price and volume, it's the everyday chain care staple every garage should have on the shelf.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDeep-penetrating spray formula dissolves stubborn grease and baked-on road dirt from within the chain links\u003c\/li\u003e\n\u003cli\u003eSafe on all sealed chain types — O-ring, X-ring and Z-ring — so there's no risk of damaging the seals that keep your chain alive\u003c\/li\u003e\n\u003cli\u003eLeaves zero residue after evaporation, giving you a perfectly clean surface for chain wax or chain oil to bond to\u003c\/li\u003e\n\u003cli\u003eSuitable for motorcycles, bicycles and e-bikes — one can covers every chain in the household\u003c\/li\u003e\n\u003cli\u003eNot tested on animals, and formulated with a fresh mint scent that makes workshop use noticeably more pleasant\u003c\/li\u003e\n\u003cli\u003eAlso available in a 750 ml workshop bottle for higher-volume users\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePerformance in Practice\u003c\/h2\u003e\u003cp\u003eThe Oxford Mint Chain Cleaner uses a slow-evaporating, high-performance solvent base that gives the spray time to work before it lifts away. Unlike fast-flash solvents that push dirt around the surface, this formula dwells long enough to break the bond between contaminants and metal. Spray it on, let it dwell for a moment, agitate with a chain brush if needed, then rinse or wipe clean. The result is a chain that looks and performs as it should.\u003c\/p\u003e\u003ch3\u003ePart of the Mint Maintenance System\u003c\/h3\u003e\u003cp\u003eOxford designed the Mint Chain Cleaner to work directly alongside Mint Chain Lube. The cleaner prepares the chain by stripping away old lubricant and contamination; the lube then applies to a fully clean surface for maximum penetration and longevity. Using both together is the most cost-effective way to extend chain life and maintain efficient drivetrain performance — reducing wear on the chain, front sprocket and rear sprocket in the process.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eUniversal fit — compatible with any motorcycle, bicycle or e-bike using a standard roller chain with O-ring, X-ring or Z-ring seals. Suitable for use on the chain, front sprocket, rear sprocket and swingarm. Verified compatible across the full range of machines including Aprilia RSV4, Ducati Panigale, BMW S1000RR, Honda CBR 1000 RR-R, Kawasaki ZX-10R, Suzuki GSX-R, Triumph Daytona and Street Triple, Yamaha R1 and R6, KTM RC 390 and RC8, MV Agusta F4, and all other chain-driven models.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Oxford\u003c\/li\u003e\n\u003cli\u003eProduct: Mint Chain Cleaner\u003c\/li\u003e\n\u003cli\u003eVolume: 500 ml aerosol spray can\u003c\/li\u003e\n\u003cli\u003eApplication: chain, front sprocket, rear sprocket, swingarm\u003c\/li\u003e\n\u003cli\u003eChain compatibility: O-ring, X-ring, Z-ring sealed chains\u003c\/li\u003e\n\u003cli\u003eSuitable for: motorcycles, bicycles, e-bikes\u003c\/li\u003e\n\u003cli\u003eScent: mint\u003c\/li\u003e\n\u003cli\u003eAnimal testing: not tested on animals\u003c\/li\u003e\n\u003cli\u003eAlso available: 750 ml workshop bottle\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oxford","offers":[{"title":"Default Title","offer_id":53168996122890,"sku":"05704413","price":11.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ChainCleaner.png?v=1780818799"},{"product_id":"oxford-mint-all-in-one-reiniger-waterless-clean-shine-foam-action-500ml","title":"Oxford Mint Waterless Clean \u0026 Shine Foam Action All-in-One Cleaner - 500ml","description":"\u003cp\u003eA fresh, streak-free shine without a single drop of water: the Oxford Mint Waterless Clean \u0026amp; Shine Foam Action is a precision-formulated all-in-one cleaner and polish that lifts dust, fingerprints and light grime effortlessly from lacquered panels, plastics and fairings. The signature mint fragrance is a nod to Oxford's well-established Mint care range — a line built on the understanding that proper maintenance starts between washes, not just after them.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWaterless foam formula cleans and polishes in one step — no hose, no bucket required\u003c\/li\u003e\n\u003cli\u003eLeaves a deep, streak-free gloss on paint, plastic and fairings\u003c\/li\u003e\n\u003cli\u003eBiodegradable and not tested on animals — a responsible choice for the environmentally conscious rider\u003c\/li\u003e\n\u003cli\u003eFresh mint scent throughout the cleaning process\u003c\/li\u003e\n\u003cli\u003e500 ml aerosol canister covers up to 9.5 m² — enough for multiple full-bike applications\u003c\/li\u003e\n\u003cli\u003eSuitable for motorcycles, bicycles, e-bikes and scooters\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHeritage and Finish\u003c\/h2\u003e\u003cp\u003eOxford's Mint care collection has earned a loyal following among riders who demand showroom results without the time investment of a full wash. The Waterless Clean \u0026amp; Shine sits at the heart of that philosophy: a single aerosol that slots naturally into a garage routine, a track-day bag or a weekend touring kit. The foam lifts contamination away from the surface before the wipe-down begins, protecting delicate lacquer from micro-scratches caused by dry rubbing. The result is a deep, wet-look gloss that speaks to the quality of finish Oxford has built its Mint name on.\u003c\/p\u003e\u003ch2\u003eUsing the Waterless Clean \u0026amp; Shine\u003c\/h2\u003e\u003cp\u003eShake the canister, spray directly onto the panel, allow a moment for the foam to encapsulate the dirt, then wipe away cleanly with a microfibre cloth. No rinsing, no drying time, no mess. It is the ideal solution for quick indoor care, pre-event preparation or keeping your machine looking sharp between full washes. One important note: this product is designed for lightly soiled surfaces. For heavily caked or muddy bikes, reach for Oxford Mint Bike Wash first, then follow up with the Waterless Clean \u0026amp; Shine for a final polish.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eUniversal product suitable for all motorcycle makes and models including Aprilia, BMW, Ducati, Honda, Kawasaki, KTM, MV Agusta, Suzuki, Triumph and Yamaha, as well as bicycles, e-bikes and scooters. Compatible with standard paint finishes, plastic bodywork and fairings.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Oxford\u003c\/li\u003e\n\u003cli\u003eProduct range: Mint\u003c\/li\u003e\n\u003cli\u003eVolume: 500 ml\u003c\/li\u003e\n\u003cli\u003eCoverage: up to 9.5 m²\u003c\/li\u003e\n\u003cli\u003eApplication type: aerosol foam spray\u003c\/li\u003e\n\u003cli\u003eUse: waterless cleaner and polish in one\u003c\/li\u003e\n\u003cli\u003eSuitable surfaces: paint, plastic, fairings\u003c\/li\u003e\n\u003cli\u003eBiodegradable: yes\u003c\/li\u003e\n\u003cli\u003eCruelty-free: not tested on animals\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oxford","offers":[{"title":"Default Title","offer_id":53168996155658,"sku":"05704435","price":12.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/WaterlessandShine.png?v=1780818799"},{"product_id":"oxford-mint-reiniger-waterless-wash-500ml","title":"Oxford Mint Waterless Wash Spray Cleaner 500ml – No-Rinse Shine for Motorcycles \u0026 Bikes","description":"\u003cp\u003eWhen water is not an option, the Oxford Mint Waterless Wash delivers a streak-free finish and a protective, water-repellent film in a single spray-wipe-buff process. Engineered for motorcycles, bicycles, e-bikes and scooters, this 500ml spray bottle houses a cruelty-free, fast-drying formula that lifts dust, light grime and fingerprints from paintwork and plastics without leaving residue or micro-scratches behind.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eNo-water formula cleans, protects and shines in one step — ideal for underground car parks, indoor garages and trackside quick-clean sessions.\u003c\/li\u003e\n\u003cli\u003eLeaves a glossy, water-repellent surface with a pronounced beading effect, helping to keep paintwork and plastic panels cleaner for longer.\u003c\/li\u003e\n\u003cli\u003eMint-scented, paint-safe concentrate is cruelty-free and fast-drying, so there is no prolonged contact time or residue risk.\u003c\/li\u003e\n\u003cli\u003eReady-to-use 500ml trigger-spray bottle requires zero dilution and fits neatly into a kit bag or tool roll for on-the-road use.\u003c\/li\u003e\n\u003cli\u003eStreak-free result on lacquer and plastic surfaces — spray, wipe and polish to a mirror finish without a hose in sight.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Formula\u003c\/h2\u003e\u003cp\u003eOxford's Mint care range is formulated with the same attention to detail that defines the brand's hardware products. The Waterless Wash uses a carefully balanced surfactant blend that encapsulates dirt particles and lifts them cleanly away from the surface without grinding them into the clear coat. The result is a paint-safe clean that would not look out of place in a professional detailing studio, delivered from a compact spray bottle you can carry in a jacket pocket.\u003c\/p\u003e\u003ch2\u003ePractical Use\u003c\/h2\u003e\u003cp\u003eSpray a light, even coat over the panel, allow a few seconds for the formula to work, then wipe away with a clean microfibre cloth. A final light buff with a dry cloth reveals the characteristic Mint shine. For heavier contamination — road film, dried mud or chain lube overspray — Oxford recommends pre-treating first with Mint Bike Wash to loosen coarse dirt before using Waterless Wash, which protects the clear coat from potential micro-abrasion caused by larger particles.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis product is a universal motorcycle and bike care item with no fitment restrictions. It is suitable for use on all painted bodywork, plastic fairings, seat cowls and clear-coated surfaces across the full range of makes and models — including Aprilia, BMW, Ducati, Honda, Kawasaki, KTM, MV Agusta, Suzuki, Triumph and Yamaha — as well as bicycles, e-bikes and scooters of any year.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Oxford\u003c\/li\u003e\n\u003cli\u003eRange: Mint\u003c\/li\u003e\n\u003cli\u003eProduct type: Waterless spray cleaner\u003c\/li\u003e\n\u003cli\u003eVolume: 500ml\u003c\/li\u003e\n\u003cli\u003eApplication: Paintwork, plastic panels, lacquered surfaces\u003c\/li\u003e\n\u003cli\u003eFinish: Gloss with water-repellent beading effect\u003c\/li\u003e\n\u003cli\u003eFormula: Fast-drying, mint-scented, cruelty-free\u003c\/li\u003e\n\u003cli\u003eSuitable for: Motorcycles, scooters, bicycles, e-bikes\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oxford","offers":[{"title":"Default Title","offer_id":53168998875402,"sku":"05704433","price":12.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/WashlessReininger.png?v=1780818806"},{"product_id":"oxford-mint-bremsenreiniger-brake-cleaner-500ml","title":"Oxford Mint Brake Cleaner Spray - 500ml","description":"\u003cp\u003eBrake performance begins with cleanliness, and the Oxford Mint Brake Cleaner is formulated to meet that standard without compromise. This 500ml aerosol delivers a fast-evaporating, residue-free clean across brake discs, calipers and clutch components — restoring full stopping power and keeping every braking surface in safe working order for road and track alike.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePowerful degreasing formula removes brake dust, oil and brake fluid from discs, calipers and clutch parts without leaving residue\u003c\/li\u003e\n\u003cli\u003eAcetone-free composition makes it safe for use around rubber seals, plastic components and painted surfaces\u003c\/li\u003e\n\u003cli\u003eFast-evaporating action means surfaces are dry and ready for use quickly — no lengthy wait time between cleaning and riding\u003c\/li\u003e\n\u003cli\u003ePrecision aerosol nozzle directs the spray exactly where it is needed, minimising waste and overspray\u003c\/li\u003e\n\u003cli\u003eNot tested on animals, with a fresh mint scent that sets it apart from harsh industrial alternatives\u003c\/li\u003e\n\u003cli\u003eCompatible with motorcycles, bicycles and e-bikes featuring disc brake systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSafe, Thorough Brake Care\u003c\/h2\u003e\u003cp\u003eContaminated braking surfaces are one of the most common causes of reduced stopping performance. Brake dust, oily residue and brake fluid deposits all degrade the friction interface between pad and disc. Oxford Mint Brake Cleaner cuts through these contaminants at depth, restoring the clean, dry surface that reliable braking demands. Because the formula contains no acetone, you can work with confidence near the rubber seals, dust boots and plastic brackets that surround modern brake assemblies — components that acetone-based products can swell or degrade over time.\u003c\/p\u003e\u003ch2\u003eApplication \u0026amp; Use\u003c\/h2\u003e\u003cp\u003eShake the can, direct the nozzle at the target surface and apply in short, controlled bursts. The solvent evaporates rapidly, carrying contaminants away without pooling. Always allow the surface to dry completely before riding — no residue should remain on the disc or pad face. Regular use as part of a maintenance routine helps sustain consistent brake feel and extends the service life of pads and discs.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eOxford Mint Brake Cleaner is a universal product suitable for all motorcycles fitted with disc brakes, including models from Aprilia, BMW, Ducati, Honda, Kawasaki, KTM, MV Agusta, Suzuki, Triumph, Yamaha and many more. It is equally effective on bicycle and e-bike hydraulic disc systems. Suitable across all model years where disc brake systems are fitted.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Oxford\u003c\/li\u003e\n\u003cli\u003eProduct: Mint Brake Cleaner\u003c\/li\u003e\n\u003cli\u003eVolume: 500ml\u003c\/li\u003e\n\u003cli\u003eFormat: Aerosol spray can\u003c\/li\u003e\n\u003cli\u003eFormula: Acetone-free, fast-evaporating, residue-free\u003c\/li\u003e\n\u003cli\u003eScent: Fresh mint\u003c\/li\u003e\n\u003cli\u003eSafe for: Rubber and plastic components\u003c\/li\u003e\n\u003cli\u003eApplication: Brake discs, brake calipers, clutch components\u003c\/li\u003e\n\u003cli\u003eAnimal testing: Not tested on animals\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oxford","offers":[{"title":"Default Title","offer_id":53168999399690,"sku":"05704418","price":11.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/BrakeCleaner.png?v=1780818810"},{"product_id":"oxford-mint-entfetter-bike-degreaser-500ml","title":"Oxford Mint Bike Degreaser 500ml Spray","description":"\u003cp\u003eFormulated to tackle the most stubborn grease and oil deposits a motorcycle can accumulate, the Oxford Mint Bike Degreaser delivers deep-penetrating cleaning action without the harsh chemical odours that come with lesser products. The slow-evaporation formula gives the active agents time to work into every crevice, loosening compacted grime from swingarms, suspension components, engine casings and chain guards — then rinsing away cleanly to leave surfaces in better condition for future maintenance.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDeep-penetrating degreaser formula that cuts through oil, grease and built-up road grime on contact\u003c\/li\u003e\n\u003cli\u003eSlow evaporation rate ensures prolonged dwell time for maximum cleaning effectiveness without repeated application\u003c\/li\u003e\n\u003cli\u003eProtects treated surfaces after cleaning, reducing friction and wear on moving parts\u003c\/li\u003e\n\u003cli\u003ePleasant mint fragrance — cruelty-free and not tested on animals — replaces the acrid smell typical of solvent-based degreasers\u003c\/li\u003e\n\u003cli\u003eEmulsifying formula lifts contamination rather than simply displacing it, making rinsing faster and more thorough\u003c\/li\u003e\n\u003cli\u003e500 ml trigger spray bottle delivers controlled, targeted application with no waste\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuilt for Serious Motorcycle Maintenance\u003c\/h2\u003e\u003cp\u003eOxford's Mint range is engineered around the reality of regular workshop use. The Bike Degreaser is not a diluted all-purpose cleaner — it is a dedicated degreasing agent concentrated to handle the kind of oily accumulation that builds up on engine blocks, swingarms, side stands, suspension linkages and sprocket covers over a season of riding. The slow-evaporating carrier fluid is a deliberate formulation choice: it keeps the active cleaning agents in contact with the contaminated surface long enough to emulsify and release oils that a fast-drying spray would simply skim over.\u003c\/p\u003e\u003cp\u003eApply, allow two to three minutes of dwell time, then agitate with a brush or cloth before rinsing. The result is a thoroughly degreased surface that is also conditioned against fresh contamination. Used as part of a regular maintenance routine, it demonstrably extends the service life of moving components by preventing the abrasive compound that forms when grit and grease combine.\u003c\/p\u003e\u003ch2\u003eVersatile Application\u003c\/h2\u003e\u003cp\u003eEqually at home on motorcycles, bicycles and e-bikes, the Oxford Mint Bike Degreaser suits any powersport or human-powered drivetrain. Across the board, the same core benefit applies: genuine deep cleaning that protects as it cleans, delivered in a format that is quick to use and leaves a workshop smelling considerably better than it did before.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eUniversal fitment — suitable for use on all motorcycle makes and models including Aprilia, BMW, Ducati, Honda, Kawasaki, KTM, MV Agusta, Suzuki, Triumph, Yamaha and more. Compatible with metal, plastic and rubber surfaces typically found on motorcycle drivetrains and chassis components. Avoid application to painted bodywork, screen materials or brake disc surfaces.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Oxford\u003c\/li\u003e\n\u003cli\u003eProduct line: Mint\u003c\/li\u003e\n\u003cli\u003eProduct type: Motorcycle degreaser spray\u003c\/li\u003e\n\u003cli\u003eVolume: 500 ml\u003c\/li\u003e\n\u003cli\u003eApplication method: Trigger spray\u003c\/li\u003e\n\u003cli\u003eFormula type: Emulsifying, slow-evaporation degreaser\u003c\/li\u003e\n\u003cli\u003eFragrance: Mint\u003c\/li\u003e\n\u003cli\u003eAnimal testing: Not tested on animals\u003c\/li\u003e\n\u003cli\u003eRecommended dwell time: 2–3 minutes\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oxford","offers":[{"title":"Default Title","offer_id":53168999989514,"sku":"05704415","price":11.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/Degregster.png?v=1780818813"},{"product_id":"oxford-mint-entfetter-bike-degreaser-750ml","title":"Oxford Mint Bike Degreaser 750ml Spray Bottle","description":"\u003cp\u003eThe Oxford Mint Bike Degreaser in the 750ml workshop bottle is the practical, everyday solution for cutting through built-up grease, old oil and road grime on your motorcycle. Its slow-evaporating, emulsifying formula does the hard work for you — leaving components clean without the elbow grease — and the fresh mint scent makes regular maintenance a far more pleasant experience.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e750ml workshop bottle delivers excellent value and enough product for repeated, thorough cleaning sessions\u003c\/li\u003e\n\u003cli\u003eSlow-evaporating formula gives the degreaser time to penetrate and lift stubborn grease and oil residue before wiping away\u003c\/li\u003e\n\u003cli\u003eEmulsifying action breaks down contamination on contact, reducing the effort required to clean heavily soiled parts\u003c\/li\u003e\n\u003cli\u003eLeaves a protective barrier that resists rapid re-soiling, so components stay cleaner for longer between washes\u003c\/li\u003e\n\u003cli\u003eBiodegradable and cruelty-free formula — kind to the environment without compromising cleaning power\u003c\/li\u003e\n\u003cli\u003ePleasant mint fragrance makes garage and workshop use noticeably more agreeable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eVersatile Workshop Performance\u003c\/h2\u003e\u003cp\u003eThe Oxford Mint Bike Degreaser is designed for the components that accumulate the heaviest contamination: engine casings, swingarms, shock absorbers, side stands and suspension linkages. It works equally well on bicycles and e-bikes, making it a single-bottle solution for any workshop. Simply apply, leave for 2 to 3 minutes, then agitate with a brush or cloth and rinse — the formula does the rest.\u003c\/p\u003e\u003ch3\u003eEveryday Usability\u003c\/h3\u003e\u003cp\u003eThe 750ml format is the sensible choice for anyone who cleans their motorcycle regularly. It offers a meaningful saving over smaller bottles and ensures you always have enough product to hand for a full, thorough clean. Whether you maintain one bike at home or work on multiple machines in a professional setting, the larger bottle size eliminates the frustration of running out mid-clean.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eUniversal product suitable for use on motorcycles, bicycles and e-bikes across all makes and model years. Compatible with metal, alloy and plastic components. Keep away from rubber seals, brake discs, brake pads and painted surfaces unless specifically directed.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Oxford\u003c\/li\u003e\n\u003cli\u003eProduct: Mint Bike Degreaser\u003c\/li\u003e\n\u003cli\u003eVolume: 750ml\u003c\/li\u003e\n\u003cli\u003eFormat: Spray bottle\u003c\/li\u003e\n\u003cli\u003eFormula: Emulsifying, slow-evaporating, biodegradable, cruelty-free\u003c\/li\u003e\n\u003cli\u003eFragrance: Mint\u003c\/li\u003e\n\u003cli\u003eApplication: Motorcycles, bicycles, e-bikes — engine, swingarm, shock absorber, stand, suspension\u003c\/li\u003e\n\u003cli\u003eRecommended contact time: 2–3 minutes before wiping or rinsing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oxford","offers":[{"title":"Default Title","offer_id":53169000907018,"sku":"05704417","price":15.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/Desgrest750.png?v=1780818817"},{"product_id":"oxford-mint-kettenspray-all-weather-lube-500ml","title":"Oxford Mint All Weather Lube Chain Spray - 500ml","description":"\u003cp\u003eThe Oxford Mint All Weather Lube is a 500ml PTFE-enriched chain spray engineered to perform in every condition the road throws at you — sunshine, downpours, or the unpredictable mix that defines everyday riding. Built on Oxford's well-established Mint maintenance heritage, it delivers long-lasting lubrication and corrosion resistance in a single, clean application, all with the signature mint fragrance that has made the Mint range a workshop staple.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePTFE-based formula creates a tenacious, dirt-repelling film that lubricates and protects simultaneously\u003c\/li\u003e\n\u003cli\u003eAnti-fling technology keeps lubricant on the chain where it belongs, extending intervals between applications\u003c\/li\u003e\n\u003cli\u003eFull corrosion protection guards the chain, sprockets, and ring seals even in wet and salted conditions\u003c\/li\u003e\n\u003cli\u003eCompatible with all chain types including O-ring, X-ring, and Z-ring chains\u003c\/li\u003e\n\u003cli\u003e500ml aerosol canister with a targeted spray nozzle for precise, clean application without waste\u003c\/li\u003e\n\u003cli\u003eNot tested on animals — cruelty-free formula in line with Oxford's Mint product ethos\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAll-Weather Performance, Mint Credentials\u003c\/h2\u003e\u003cp\u003eWhat sets the All Weather Lube apart from a standard chain spray is the balance it strikes between adhesion and cleanliness. The PTFE carrier bonds to metal surfaces quickly, forming a protective layer that resists water wash-off and prevents the kind of corrosion that shortens chain life on bikes used in all seasons. The anti-fling characteristic means less mess on the rear wheel and swingarm, and more lubrication retained through long distances.\u003c\/p\u003e\u003cp\u003eThe Mint range has always been known for doing the job properly without unnecessary chemical aggression. This spray is no different — it protects O-ring, X-ring, and Z-ring seals without swelling or degrading them, making it equally at home on a commuter chain or a touring bike's drivetrain.\u003c\/p\u003e\u003ch2\u003eApplication \u0026amp; Maintenance Tip\u003c\/h2\u003e\u003cp\u003eFor the best results, clean the chain with Oxford Mint Chain Cleaner before applying All Weather Lube. A clean surface allows the PTFE formula to bond directly to the metal, maximising both lubrication depth and corrosion resistance. Apply with the engine warm, rotate the rear wheel to coat the full chain run, and allow a few minutes for the carrier solvent to evaporate before riding.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eSuitable for all motorcycle chains — O-ring, X-ring, and Z-ring types — across all makes and models. Compatible with machines from manufacturers including Aprilia, BMW, Ducati, Honda, Kawasaki, KTM, MV Agusta, Suzuki, Triumph, Yamaha, and many more. Suitable for road, touring, and everyday use across all model years.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Oxford\u003c\/li\u003e\n\u003cli\u003eProduct line: Mint\u003c\/li\u003e\n\u003cli\u003eVolume: 500ml\u003c\/li\u003e\n\u003cli\u003eFormula type: PTFE-based all-weather lubricant\u003c\/li\u003e\n\u003cli\u003eChain compatibility: O-ring, X-ring, Z-ring\u003c\/li\u003e\n\u003cli\u003eKey properties: anti-fling, corrosion protection, long-lasting adhesion\u003c\/li\u003e\n\u003cli\u003eAnimal testing: none — cruelty-free\u003c\/li\u003e\n\u003cli\u003eApplication: aerosol spray\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oxford","offers":[{"title":"Default Title","offer_id":53169001660682,"sku":"05704421","price":11.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/AllWeartlUbe.png?v=1780818823"},{"product_id":"oxford-mint-oberflachenschutz-general-protectant-500ml","title":"Oxford Mint General Protectant Surface Protection Spray - 500ml","description":"\u003cp\u003eA single product that earns its place on every workbench, the Oxford Mint General Protectant is a wax-based surface protection spray engineered to shield metal, plastic, rubber and electronics from moisture, salt, corrosion and road grime. With its fresh mint scent and cruelty-free formula, it brings a professional level of care to your motorcycle whether you are preparing it for winter storage or simply finishing a detail clean.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eForms a long-lasting, water-repellent wax film across a wide range of surfaces including metal, plastic, rubber and electrical connectors\u003c\/li\u003e\n\u003cli\u003eActively guards against moisture, road salt, corrosion and dirt accumulation — ideal for extended lay-up or garage storage\u003c\/li\u003e\n\u003cli\u003eLight wax finish reduces future dirt adhesion and makes subsequent cleaning noticeably easier\u003c\/li\u003e\n\u003cli\u003eWax-based formula with no aggressive solvents — safe for use on painted surfaces, fork stanchions, fasteners and wiring looms\u003c\/li\u003e\n\u003cli\u003eCruelty-free, mint-scented formula in a convenient 500ml spray can sized for thorough coverage\u003c\/li\u003e\n\u003cli\u003eSuitable for motorcycles, bicycles and e-bikes — anywhere detailed protection of moving parts and fasteners is required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProtection That Works Where It Matters\u003c\/h2\u003e\u003cp\u003eFork stanchions, exposed bolts, brake and clutch lever pivots, electrical connectors and rubber seals are among the first components to suffer when moisture and salt find a way in. The Oxford Mint General Protectant is designed specifically for these hard-to-reach areas. The spray delivery makes it easy to coat intricate components evenly, and the wax carrier then sets into a durable film that displaces existing moisture and resists fresh ingress.\u003c\/p\u003e\u003cp\u003eThe light wax finish also acts as a surface release agent. Dirt and road film sit on top of the coating rather than bonding directly to the substrate, which means your next wash takes a fraction of the effort it would otherwise require. This is particularly valuable on frame rails, swingarm pivots and under-seat wiring where manual polishing is impractical.\u003c\/p\u003e\u003ch2\u003eSeasonal Storage and Year-Round Use\u003c\/h2\u003e\u003cp\u003eFor riders putting their machine away over winter, the Oxford Mint General Protectant provides a straightforward and effective conservation treatment. A thorough application after the final wash of the season creates a protective barrier that holds through months of inactivity. The same product earns its keep throughout the riding season applied after every wash to maintain that protective layer across all exposed components.\u003c\/p\u003e\u003cp\u003eAlways apply after cleaning on a dry surface. Do not spray onto brake discs, brake pads or brake calipers — brake components must remain free from any wax or lubricant contamination.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eUniversal — suitable for all motorcycle makes and models including Aprilia, BMW, Ducati, Honda, Kawasaki, KTM, MV Agusta, Suzuki, Triumph and Yamaha. Also compatible with bicycles and e-bikes. Appropriate for use on chassis, suspension, drivetrain, electrical and plastic components across all model years.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Oxford\u003c\/li\u003e\n\u003cli\u003eProduct line: Oxford Mint\u003c\/li\u003e\n\u003cli\u003eProduct type: Surface protection spray\u003c\/li\u003e\n\u003cli\u003eVolume: 500ml\u003c\/li\u003e\n\u003cli\u003eFormat: Pressurised spray can\u003c\/li\u003e\n\u003cli\u003eFormula base: Wax-based, water-repellent\u003c\/li\u003e\n\u003cli\u003eScent: Fresh mint\u003c\/li\u003e\n\u003cli\u003eSuitable surfaces: Metal, plastic, rubber, electronics\u003c\/li\u003e\n\u003cli\u003eCruelty-free: Yes\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oxford","offers":[{"title":"Default Title","offer_id":53169001955594,"sku":"05704411","price":11.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/GeneralPortector_812a0d50-f097-4e04-a2f9-e3028471dac3.png?v=1780818823"},{"product_id":"oxford-mint-politur-fast-finish-polish-500ml","title":"Oxford Mint Fast Finish Polish 500ml – Natural Wax Spray for Motorcycles","description":"\u003cp\u003eAchieving a deep, showroom-quality shine after every ride should take seconds, not an afternoon. Oxford Mint Fast Finish Polish delivers exactly that — a water-repellent protective finish built on natural waxes, applied effortlessly from a 500ml spray and safe for painted panels, tanks and plastic fairings across virtually every motorcycle on the road.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eNatural wax formula creates a deep, clean gloss without abrasives or harsh chemicals\u003c\/li\u003e\n\u003cli\u003eWater-repellent barrier shields paint, plastics and tanks from moisture, road grime and environmental fallout\u003c\/li\u003e\n\u003cli\u003eFast-drying spray application means a full polish in seconds — no prolonged buffing required\u003c\/li\u003e\n\u003cli\u003eCruelty-free formulation: never tested on animals\u003c\/li\u003e\n\u003cli\u003ePleasantly fresh mint fragrance during application\u003c\/li\u003e\n\u003cli\u003eTreated surfaces stay cleaner for longer and are significantly easier to wipe down after subsequent washes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePerformance and Build Quality\u003c\/h2\u003e\u003cp\u003eOxford Mint Fast Finish Polish is engineered around a blend of natural waxes suspended in a water-repellent carrier. The result is a surface treatment that does two jobs simultaneously: it lays down a high-gloss optical finish and deposits a hydrophobic layer that causes water and light contamination to bead and run off. That protective film also reduces the adhesion of road dust and insect residue, which means less effort the next time the bike needs cleaning.\u003c\/p\u003e\u003cp\u003eThe spray format makes the product genuinely quick to use. A light, even mist across a panel, a brief spread with a clean microfibre cloth, and the finish sets rapidly — no chalky residue, no complicated dwell times. It is equally at home in the garage after a full detail or as a quick post-wash finishing step before a ride.\u003c\/p\u003e\u003ch2\u003eSafe Application — Important Safety Note\u003c\/h2\u003e\u003cp\u003eFast Finish Polish must never be applied to brake discs, brake callipers, brake pads, tyres or any other safety-critical component. The water-repellent, lubricating properties of the wax formula can severely compromise braking performance and tyre grip. Apply only to clean, dry painted surfaces, plastic fairings and bodywork panels. When in doubt, mask off braking components before use.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eOxford Mint Fast Finish Polish is a universal motorcycle care product suitable for use on the paintwork, tanks and plastic fairings of all makes and models, including but not limited to: Aprilia RSV4 and RS 660 series; BMW S1000RR, M1000RR and HP4; Ducati 848, 899, 959, 1199 and 1299 Panigale families; Honda CBR 600 RR and CBR 1000 RR-R; Kawasaki ZX-6R, ZX-10R and ZX-10RR; KTM RC 390 and RC8 1190; MV Agusta F3 and F4; Suzuki GSX-R 600, GSX-R 750 and GSX-R 1000; Triumph Daytona 675, Daytona 765 and Street Triple 765 RS; Yamaha R1, R1M, R6, R7, R9 and R3. Compatible with model years from 2003 through to 2026.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Oxford\u003c\/li\u003e\n\u003cli\u003eProduct line: Oxford Mint\u003c\/li\u003e\n\u003cli\u003eProduct name: Fast Finish Polish\u003c\/li\u003e\n\u003cli\u003eVolume: 500ml\u003c\/li\u003e\n\u003cli\u003eApplication type: spray\u003c\/li\u003e\n\u003cli\u003eFormula: natural waxes with water-repellent carrier\u003c\/li\u003e\n\u003cli\u003eAnimal testing: cruelty-free\u003c\/li\u003e\n\u003cli\u003eSuitable surfaces: painted panels, fuel tanks, plastic fairings\u003c\/li\u003e\n\u003cli\u003eFragrance: mint\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oxford","offers":[{"title":"Default Title","offer_id":53169002086666,"sku":"05704425","price":11.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/FastFinishPoilster.png?v=1780818824"},{"product_id":"oxford-mint-silikonspray-silicone-detailer-500ml","title":"Oxford Mint Silicone Detailer Spray 500ml – Gloss Protection for Paint, Carbon \u0026 Fairings","description":"\u003cp\u003eA silicone-based detailer engineered for riders who take finish seriously, the Oxford Mint Silicone Detailer delivers a streak-free, satin-smooth gloss on paint, carbon fibre, bare plastics and fairings — all in a single, fast application. Its mint-scented formula fills fine scratches and micro-abrasions, actively repels dust and fingerprints, and reduces friction at moving contact points, keeping your motorcycle, e-bike or bicycle looking sharper for longer between full washes.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSilicone formula smooths surfaces, conceals light scratches and reduces friction at moving plastic and rubber components\u003c\/li\u003e\n\u003cli\u003eEffective on a wide range of surfaces: painted panels, unpainted plastics, carbon fibre, tank surfaces and fairings\u003c\/li\u003e\n\u003cli\u003eLeaves a streak-free, high-gloss finish without heavy residue or smearing\u003c\/li\u003e\n\u003cli\u003eSignificantly reduces dust adhesion and fingerprint marks after application\u003c\/li\u003e\n\u003cli\u003eQuick to apply directly from the 500 ml spray can — no additional tools or applicator pads required\u003c\/li\u003e\n\u003cli\u003eCruelty-free formulation with a fresh mint scent\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePerformance \u0026amp; Application\u003c\/h2\u003e\u003cp\u003eThe Oxford Mint Silicone Detailer is designed for regular detail maintenance rather than full-service cleans. A light, even mist over a clean panel instantly restores that showroom depth of gloss, smoothing out surface texture and leaving a fine protective layer that slows the re-accumulation of road grime and dust. The formula works equally well on bodywork plastics, carbon components and lacquered metal surfaces, making it a genuinely versatile addition to any workshop or kit bag.\u003c\/p\u003e\u003cp\u003eApplication takes seconds: shake the can, hold it approximately 20–30 cm from the surface, and sweep in smooth, overlapping passes. Buff lightly with a clean microfibre cloth to enhance gloss and remove any light haze. Always apply to a clean, dry surface for best results.\u003c\/p\u003e\u003ch2\u003eSafety \u0026amp; Usage Notes\u003c\/h2\u003e\u003cp\u003eThis product contains silicone compounds. It must not be sprayed on or near brake discs, brake pads, tyre contact patches, or any other friction-critical components. Silicone contamination on braking surfaces or tyres will severely reduce grip and can create a dangerous safety hazard. Keep away from open flames and store in a cool, well-ventilated area out of direct sunlight. Keep out of reach of children. Follow all safety instructions printed on the can.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eSuitable for use on motorcycles, e-bikes and bicycles across all makes and model years. Compatible with the bodywork, fairings, carbon parts and plastics of machines including — but not limited to — Aprilia RSV4, Ducati 1199\/1299\/848\/899\/959, BMW S1000RR\/M1000RR\/HP4, Honda CBR 1000 RR\/CBR 600 RR, Kawasaki ZX-10R\/ZX-6R\/Ninja 400, Yamaha R1\/R6\/R7, Suzuki GSX-R 1000\/GSX-R 750\/GSX-R 600, Triumph Daytona 675\/Street Triple 765, KTM RC 390\/RC8 1190, MV Agusta F3\/F4, and universally on any painted, plastic or carbon surface.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Oxford\u003c\/li\u003e\n\u003cli\u003eProduct line: Mint\u003c\/li\u003e\n\u003cli\u003eProduct type: Silicone detailer spray\u003c\/li\u003e\n\u003cli\u003eVolume: 500 ml\u003c\/li\u003e\n\u003cli\u003eContainer: pressurised spray can\u003c\/li\u003e\n\u003cli\u003eScent: mint\u003c\/li\u003e\n\u003cli\u003eCruelty-free: yes\u003c\/li\u003e\n\u003cli\u003eSuitable surfaces: paint, carbon fibre, plastic fairings, unpainted plastics\u003c\/li\u003e\n\u003cli\u003eNot suitable for: brake discs, brake pads, tyres or other friction-critical surfaces\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oxford","offers":[{"title":"Default Title","offer_id":53169002184970,"sku":"05704412","price":11.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/SilicionDetailer.png?v=1780818826"},{"product_id":"oxford-mint-kettenspray-dry-weather-lube-500ml","title":"Oxford Mint Dry Weather Lube Chain Spray - 500ml","description":"\u003cp\u003eEngineered for hot summer days and dusty roads, the Oxford Mint Dry Weather Lube delivers a clean, long-lasting lubricating film that keeps your chain running smoothly without the usual grime build-up. The PTFE-based formula is the result of careful formulation work — anti-fling properties, real wear resistance, and a genuinely pleasant mint scent set this apart from the cheap aerosols cluttering the market.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePTFE-based formula creates a durable, low-friction lubricating film specifically optimised for dry and dusty riding conditions\u003c\/li\u003e\n\u003cli\u003eAnti-fling technology keeps the lubricant where it belongs — on the chain — rather than sprayed across your swingarm and wheel\u003c\/li\u003e\n\u003cli\u003eDirt-repellent film actively resists dust and debris, reducing the frequency of cleaning and extending chain life\u003c\/li\u003e\n\u003cli\u003eCompatible with all sealed chain types including O-ring, X-ring and Z-ring chains\u003c\/li\u003e\n\u003cli\u003eNot tested on animals, and lightly scented with a fresh mint fragrance — a signature Oxford Mint touch\u003c\/li\u003e\n\u003cli\u003e500 ml pressurised can with a precision applicator nozzle for clean, controlled application\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuilt Around Performance in the Heat\u003c\/h2\u003e\u003cp\u003eWhere wet-weather lubes are designed to cling through rain and road spray, the Dry Weather Lube takes a different approach. Its lighter, PTFE-enriched carrier penetrates the chain's inner plates and rollers efficiently at higher ambient temperatures, where thicker lubes can become tacky and trap dust. The result is noticeably cleaner drivetrain performance across a long summer tour or a fast track day in warm conditions.\u003c\/p\u003e\u003cp\u003eOxford's Mint chain care range is built on the principle that preparation and material quality determine outcomes. Using a quality PTFE lubricant on a freshly cleaned chain — rather than layering product on top of old grime — is what separates a chain that lasts 20,000 kilometres from one that's worn out at 12,000. Oxford recommend pairing this with Mint Chain Cleaner for the best adhesion and protection.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis chain spray is a universal product suitable for all motorcycle chain types and drivetrains. It is appropriate for use on motorcycles from all major manufacturers including Aprilia, BMW, Ducati, Honda, Kawasaki, KTM, MV Agusta, Suzuki, Triumph and Yamaha — covering models such as the S1000RR, RSV4, R1, CBR 1000 RR-R, ZX-10R, RC 390, Daytona 765, GSX-R 1000 and many more. Compatible with O-ring, X-ring and Z-ring sealed chains across all engine capacities.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Oxford\u003c\/li\u003e\n\u003cli\u003eProduct line: Mint Chain Care\u003c\/li\u003e\n\u003cli\u003eType: Dry weather chain lubricant spray\u003c\/li\u003e\n\u003cli\u003eFormula base: PTFE (polytetrafluoroethylene)\u003c\/li\u003e\n\u003cli\u003eConditions: Optimised for dry, hot and dusty conditions\u003c\/li\u003e\n\u003cli\u003eChain compatibility: O-ring, X-ring, Z-ring and unsealed chains\u003c\/li\u003e\n\u003cli\u003eVolume: 500 ml\u003c\/li\u003e\n\u003cli\u003eAnimal testing: Not tested on animals\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oxford","offers":[{"title":"Default Title","offer_id":53169002479882,"sku":"05704419","price":11.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/DryLube.png?v=1780818830"},{"product_id":"oxford-mint-kettenspray-wet-weather-lube-500ml","title":"Oxford Mint Wet Weather Chain Lube - 500ml","description":"\u003cp\u003eWhen autumn rain sets in and winter grime coats every road, your chain needs a lubricant that refuses to wash off. Oxford Mint Wet Weather Lube is engineered specifically for wet, muddy and harsh riding conditions, delivering a tenacious PTFE-enhanced, wax-based film that clings to every link and keeps corrosion at bay through the worst the seasons can throw at a daily rider.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePTFE-enriched formula locks onto chain surfaces even in sustained rain, providing a low-friction film that reduces wear on O-, X- and Z-ring chains alike.\u003c\/li\u003e\n\u003cli\u003eWax-based carrier creates a water-resistant barrier that actively repels moisture and prevents corrosion on chains, sprockets and ring seals.\u003c\/li\u003e\n\u003cli\u003eExceptional anti-fling performance keeps lubricant where it belongs — on the chain — rather than sprayed across the swingarm and tyre sidewall.\u003c\/li\u003e\n\u003cli\u003eSuitable for all sealed chain types: O-ring, X-ring and Z-ring, making it a versatile choice across the entire garage.\u003c\/li\u003e\n\u003cli\u003eNot tested on animals, with a fresh mint scent that makes routine maintenance noticeably more pleasant.\u003c\/li\u003e\n\u003cli\u003e500ml aerosol delivers generous coverage and long shelf life, representing outstanding value for commuters who lubricate frequently.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEngineered for All-Weather Riding\u003c\/h2\u003e\u003cp\u003eCommuters, touring riders and anyone who refuses to leave the bike parked when the weather turns will appreciate a chain lubricant designed from the ground up for wet conditions rather than adapted from a dry-weather formula. The combination of PTFE particles and a wax carrier means the film bonds to metal under pressure, resisting the continuous dilution and wash-off that conventional oils suffer in persistent rain. Ride through standing water, muddy lanes or salted winter roads and the protective layer remains intact, extending chain and sprocket life significantly compared to neglected or under-lubricated drivetrains.\u003c\/p\u003e\u003ch2\u003ePractical Maintenance Advice\u003c\/h2\u003e\u003cp\u003eFor the best possible adhesion, clean the chain thoroughly with Oxford Chain Cleaner before applying Wet Weather Lube. Apply to a warm chain with the wheel elevated, rotating slowly to coat every link, then allow a few minutes for the carrier to evaporate and the protective film to set before riding. Regular application — ideally every 400–600 miles or after every wet ride — keeps the drivetrain running quietly and extends service intervals.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eCompatible with all motorcycle and scooter chain types including O-ring, X-ring and Z-ring sealed chains. Suitable for use across all makes and models — from everyday commuters and naked bikes through to sportsbikes, adventure tourers and off-road machines. Universally applicable wherever a 520, 525, 530 or 630-pitch chain is fitted.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Oxford\u003c\/li\u003e\n\u003cli\u003eProduct line: Mint Maintenance\u003c\/li\u003e\n\u003cli\u003eVolume: 500ml\u003c\/li\u003e\n\u003cli\u003eApplication type: Aerosol spray\u003c\/li\u003e\n\u003cli\u003ePrimary additives: PTFE, corrosion inhibitors, wax-based carrier\u003c\/li\u003e\n\u003cli\u003eChain compatibility: O-ring, X-ring, Z-ring\u003c\/li\u003e\n\u003cli\u003eIntended conditions: Wet, muddy and winter riding\u003c\/li\u003e\n\u003cli\u003eAnimal testing: None\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oxford","offers":[{"title":"Default Title","offer_id":53169002938634,"sku":"05704420","price":11.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/WetLube.png?v=1780818834"},{"product_id":"oxford-mint-helmpflege-set-helmet-care-kit-4-teilig","title":"Oxford Mint Helmet Care Kit – 4-Piece Helmet Cleaning \u0026 Care Set","description":"\u003cp\u003eEvery helmet deserves proper care, and the Oxford Mint Helmet Care Kit delivers exactly that in a format refined for riders who take pride in their kit. Four purpose-built products sit neatly inside a rigid EVA carry case, giving you everything needed to clean, de-fog, sanitise and polish your helmet — whether you're mid-tour, commuting, or freshening up at home.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eComplete 4-piece care solution covering exterior cleaning, anti-fog treatment, interior hygiene and scratch-free buffing\u003c\/li\u003e\n\u003cli\u003eRigid EVA hard-foam carry case protects the contents and fits easily into a tank bag or luggage compartment\u003c\/li\u003e\n\u003cli\u003eHelmet Sanitiser (100 ml) refreshes inner liners and padding, eliminating odour-causing bacteria\u003c\/li\u003e\n\u003cli\u003eAnti-Fog Spray (50 ml) applies a clear, durable coating to the visor interior for consistently clear vision in cold or humid conditions\u003c\/li\u003e\n\u003cli\u003eHelmet Cleaner (50 ml) lifts road grime, insects and residue from the outer shell without damaging lacquer or graphics\u003c\/li\u003e\n\u003cli\u003eMicrofibre cloth included for lint-free, scratch-free application and buffing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesigned for Riders on the Move\u003c\/h2\u003e\u003cp\u003eOxford's Mint range has long been the go-to choice for riders who want professional-grade results from a compact kit. The Helmet Care Kit distils that heritage into four precisely chosen products, each sized to travel without bulk. The rigid EVA case keeps everything organised and protected against the knocks of everyday touring life — tuck it into a pannier, a top box, or the front pocket of a tank bag and it's ready whenever you need it.\u003c\/p\u003e\u003ch2\u003eProduct by Product\u003c\/h2\u003e\u003cp\u003eThe Helmet Cleaner cuts through the inevitable accumulation of insects, road film and urban grime that builds up on outer shells during any meaningful ride. The Anti-Fog Spray treats the inner face of the visor, maintaining optical clarity when temperatures drop or humidity rises — a genuine safety benefit on long days in the saddle. The Helmet Sanitiser targets the inner liner and cheek pads, neutralising the bacteria responsible for helmet odour and keeping the interior fresh for the next ride. The microfibre cloth rounds out the set, providing a safe, non-abrasive surface for applying each product and delivering a streak-free finish.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThe Oxford Mint Helmet Care Kit is a universal product suitable for all helmet types and brands — full-face, modular, open-face and motocross lids alike. The Helmet Cleaner and Anti-Fog Spray are safe for use on polycarbonate and composite shell materials, standard tinted visors, and Pinlock-prepared lenses (apply Anti-Fog Spray to the outer face of the inner Pinlock lens where applicable). Suitable for all rider types: tourers, commuters, track-day riders and everyday motorcyclists.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Oxford\u003c\/li\u003e\n\u003cli\u003eProduct line: Mint\u003c\/li\u003e\n\u003cli\u003eKit contents: 4 items\u003c\/li\u003e\n\u003cli\u003eHelmet Sanitiser: 100 ml\u003c\/li\u003e\n\u003cli\u003eAnti-Fog Spray: 50 ml\u003c\/li\u003e\n\u003cli\u003eHelmet Cleaner: 50 ml\u003c\/li\u003e\n\u003cli\u003eMicrofibre cloth: 1 piece\u003c\/li\u003e\n\u003cli\u003eCarry case: rigid EVA hard-foam\u003c\/li\u003e\n\u003cli\u003eApplication: universal — all helmet types and brands\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oxford","offers":[{"title":"Default Title","offer_id":53169003626762,"sku":"05703749","price":29.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/MintKit1.png?v=1780818839"},{"product_id":"oxford-mint-antibeschlag-spray-250ml","title":"Oxford Mint Anti-Fog Spray for Helmet Visors \u0026 Eyewear - 250ml","description":"\u003cp\u003eClear vision is non-negotiable on the road, and the Oxford Mint Anti-Fog Spray delivers exactly that — a streak-free, residue-free barrier against misting that keeps your visor, glasses and helmet interior surfaces clean and transparent through long days of riding in any weather.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrevents fogging on visors, glasses and helmet interior surfaces for reliable all-day clarity\u003c\/li\u003e\n\u003cli\u003eStreak-free formula leaves no sticky residue and applies cleanly to plastic and glass surfaces\u003c\/li\u003e\n\u003cli\u003eCompletely odourless — no chemical smell inside the helmet during extended rides\u003c\/li\u003e\n\u003cli\u003eBiodegradable, cruelty-free formula safe for daily use on all common visor materials\u003c\/li\u003e\n\u003cli\u003eInstant action: cleans, polishes and protects in one quick application\u003c\/li\u003e\n\u003cli\u003e250ml spray bottle gives plenty of coverage for regular, long-term helmet maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAll-Day Comfort on Every Ride\u003c\/h2\u003e\u003cp\u003eFogged visors are not just an annoyance — they are a genuine safety hazard. Oxford Mint Anti-Fog Spray creates an invisible anti-fog layer that works from the moment you apply it, making it equally at home in cold morning commutes, wet weather touring, and high-intensity track sessions where temperature differentials inside the helmet are greatest.\u003c\/p\u003e\u003cp\u003eBecause the formula is entirely odourless and non-tacky, it adds nothing unwanted to the environment inside your lid. There is no chemical residue to irritate your eyes, no stickiness to attract grime, and no scent to fatigue you over a long journey. For riders who are sensitive to helmet care products or simply value a neutral, unobtrusive experience, this makes it the go-to daily spray.\u003c\/p\u003e\u003ch2\u003eVersatile Surface Protection\u003c\/h2\u003e\u003cp\u003eThe spray is not limited to motorcycle visors. It performs equally well on cycling glasses, ski goggles, safety eyewear and any plastic or glass lens surface that is susceptible to condensation. Apply it as part of a regular helmet care routine — a quick spray and wipe before each ride ensures consistent protection without build-up. Oxford recommends avoiding application in direct sunlight to achieve the most even, transparent coating.\u003c\/p\u003e\u003cp\u003eAlso available in a compact 50ml variant for travel or luggage bag storage when the full 250ml bottle is not convenient.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eSuitable for use on all helmet visor materials, spectacle and sunglass lenses, ski and cycling goggle lenses, plastic and glass interior helmet surfaces. Compatible with pinlock-equipped visors when applied to the outer surface. Always follow the application instructions and avoid saturating Pinlock lens seals.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Oxford\u003c\/li\u003e\n\u003cli\u003eProduct: Mint Anti-Fog Spray\u003c\/li\u003e\n\u003cli\u003eVolume: 250ml\u003c\/li\u003e\n\u003cli\u003eFormat: Spray bottle\u003c\/li\u003e\n\u003cli\u003eFormula: Biodegradable, odourless, non-sticky, residue-free\u003c\/li\u003e\n\u003cli\u003eCruelty-free: Yes — not tested on animals\u003c\/li\u003e\n\u003cli\u003eSuitable for: Visors, glasses, goggles, plastic and glass surfaces\u003c\/li\u003e\n\u003cli\u003eAlso available in: 50ml variant\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oxford","offers":[{"title":"Default Title","offer_id":53169004708106,"sku":"05704390","price":17.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/AntiFogSpray.png?v=1780818842"},{"product_id":"oxford-mint-helmpolsterreiniger-200ml","title":"Oxford Mint Helmet Sanitiser Foam Cleaner 200ml","description":"\u003cp\u003eRiding hard means sweating harder — and every session leaves bacteria, odour and moisture deep inside your helmet lining. The Oxford Mint Helmet Sanitiser cuts through all of it with a fine-pore foam engineered to penetrate the innermost layers of any helmet interior, delivering genuine hygiene rather than just masking smells.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFine-pore foam formula penetrates deep into helmet liners, gloves and boot interiors to neutralise bacteria and eliminate odour at the source\u003c\/li\u003e\n\u003cli\u003eFragrance-free and dermatologically mild — no artificial scents, no skin-irritating additives, safe for extended contact with sensitive skin\u003c\/li\u003e\n\u003cli\u003eBiodegradable formula with a mild biocide for effective sanitisation without harsh chemicals\u003c\/li\u003e\n\u003cli\u003eNot tested on animals — a responsible choice that does not compromise on performance\u003c\/li\u003e\n\u003cli\u003eFoam applicator integrated into the 200 ml bottle for clean, controlled, no-mess application\u003c\/li\u003e\n\u003cli\u003eVersatile use across motorcycle, bicycle and e-bike helmets as well as gloves, boots and other close-fitting gear\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuilt for the Demands of Regular Riding\u003c\/h2\u003e\u003cp\u003eWhether you are clocking track days back to back or commuting daily in summer heat, the interior of your helmet takes a significant hygienic hit. Standard household products can damage delicate liner fabrics or leave residues that irritate skin under a snug-fitting helmet. Oxford Mint Helmet Sanitiser is specifically formulated to work with helmet materials — foam, textile and mesh — breaking down the organic matter that causes persistent odour without degrading the liner itself.\u003c\/p\u003e\u003cp\u003eThe application process is straightforward: apply the foam to the affected areas, allow it to work, then wipe away. No rinsing is required, making it practical even between sessions at a track day when time is limited.\u003c\/p\u003e\u003ch2\u003eWider Gear Care\u003c\/h2\u003e\u003cp\u003eThe same bacteria and odour build-up that affects helmet liners is equally present in gloves, riding boots and any other close-fitting kit. Oxford Mint Helmet Sanitiser handles all of these, giving you a single product that covers your entire hygiene routine for riding gear. The 200 ml size is also available in a 100 ml format for travel or tank bag storage.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eSuitable for use with all motorcycle, bicycle and e-bike helmets regardless of brand or liner type. Also compatible with riding gloves, boots and other tight-fitting protective gear. Not intended for use on outer helmet shells, visors or painted surfaces.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Oxford\u003c\/li\u003e\n\u003cli\u003eProduct: Mint Helmet Sanitiser\u003c\/li\u003e\n\u003cli\u003eVolume: 200 ml\u003c\/li\u003e\n\u003cli\u003eFormat: Fine-pore foam with integrated applicator\u003c\/li\u003e\n\u003cli\u003eFormula: Biodegradable, fragrance-free, mild biocide\u003c\/li\u003e\n\u003cli\u003eDermatologically mild: Yes\u003c\/li\u003e\n\u003cli\u003eAnimal testing: None\u003c\/li\u003e\n\u003cli\u003eAlso available: 100 ml\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oxford","offers":[{"title":"Default Title","offer_id":53169005527306,"sku":"05703780","price":13.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/HelmetSantisfer.png?v=1780818845"},{"product_id":"oxford-mint-visier-und-helmreiniger-250ml","title":"Oxford Mint Visor and Helmet Cleaner - 250ml","description":"\u003cp\u003eKeeping your visor crystal clear is not a luxury — it is a safety essential, and the Oxford Mint Visor and Helmet Cleaner is formulated from the ground up to deliver exactly that. This 250ml spray uses a biodegradable, alcohol-free formula engineered to dissolve insects, road film, and grease deposits without leaving streaks, smears, or residue behind — even when applied in direct sunlight.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAlcohol-free formula is gentle on all visor coatings, including anti-fog and anti-scratch treatments\u003c\/li\u003e\n\u003cli\u003eBiodegradable, odourless and cruelty-free — a responsible choice for environmentally conscious riders\u003c\/li\u003e\n\u003cli\u003eFast-drying action leaves surfaces streak-free and clear, even under direct sun\u003c\/li\u003e\n\u003cli\u003eSuitable for visors, helmet shells, headlights, painted surfaces, and plastic components\u003c\/li\u003e\n\u003cli\u003eAvailable in a practical 250ml spray bottle, with a 50ml travel size also available for touring or commuting kits\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePremium Formula, Thoughtfully Built\u003c\/h2\u003e\u003cp\u003eWhat sets Oxford Mint apart from generic screen cleaners is the quality of its formulation. The absence of alcohol means it will not degrade delicate optical coatings or plastics over repeated use — a crucial consideration for riders who clean their visors daily. The biodegradable base keeps the formula environmentally sound without compromising cleaning power. Applied with a quality microfibre cloth, it lifts stubborn insect residue and road grime in seconds, leaving a surface that feels as clean as it looks.\u003c\/p\u003e\u003ch2\u003eRoad, Track, and Daily Commute\u003c\/h2\u003e\u003cp\u003eWhether you are wiping down after a summer motorway blast thick with flies, freshening your helmet after a wet commute, or preparing your kit before a track day, Oxford Mint performs consistently across all conditions. Its streak-free finish means no distracting smears at dusk or under artificial lighting — situations where visor clarity matters most. The compact spray format slots easily into a jacket pocket, tank bag, or paddock box for on-the-go use.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eOxford Mint Visor and Helmet Cleaner is compatible with all motorcycle helmet visors and outer shells regardless of brand or certification. It is also safe to use on:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMotorcycle headlights and screen plastics\u003c\/li\u003e\n\u003cli\u003ePainted bodywork and lacquered fairing panels\u003c\/li\u003e\n\u003cli\u003ePlastic windscreens and instrument covers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Oxford\u003c\/li\u003e\n\u003cli\u003eProduct: Mint Visor and Helmet Cleaner\u003c\/li\u003e\n\u003cli\u003eVolume: 250ml\u003c\/li\u003e\n\u003cli\u003eFormula: Biodegradable, alcohol-free, odourless\u003c\/li\u003e\n\u003cli\u003eApplication: Spray bottle\u003c\/li\u003e\n\u003cli\u003eFinish: Streak-free, smear-free\u003c\/li\u003e\n\u003cli\u003eAnimal testing: No (cruelty-free)\u003c\/li\u003e\n\u003cli\u003eSuitable surfaces: Visors, helmet shells, headlights, painted surfaces, plastic\u003c\/li\u003e\n\u003cli\u003eAlso available: 50ml travel size\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oxford","offers":[{"title":"Default Title","offer_id":53169005625610,"sku":"05704374","price":9.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/HelmetVisorClenaer.png?v=1780818847"},{"product_id":"oxford-mint-impragnierspray-rainseal-waterproofing-500ml","title":"Oxford Mint RainSeal Waterproofing Spray 500ml – Textile Protector for Motorcycle Gear","description":"\u003cp\u003eDesigned for riders who demand reliable protection in all conditions, Oxford Mint RainSeal Waterproofing Spray restores and reinforces water, dirt and UV resistance across virtually every textile you own — from motorcycle jackets and riding trousers to luggage, boots and tent flysheets. Its silicon-free, breathability-preserving formula leaves no residue and no stiffening of the fabric, just clean, invisible protection.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWater-repellent barrier causes droplets to bead and roll off rather than saturating the fabric\u003c\/li\u003e\n\u003cli\u003eDirt-resistant treatment reduces soiling and makes cleaning faster after track days or long-distance touring\u003c\/li\u003e\n\u003cli\u003eUV protection slows colour fade on exposed outer garments and covers\u003c\/li\u003e\n\u003cli\u003eSilicon-free formula maintains the fabric's natural breathability and softness — no clogging of DWR membranes\u003c\/li\u003e\n\u003cli\u003eCompatible with polyester, cotton, nylon and most mixed-weave textiles\u003c\/li\u003e\n\u003cli\u003eGenerous 500 ml pressurised spray can covers multiple garments per application\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePerformance on the Road and Track\u003c\/h2\u003e\u003cp\u003eWhether you are chasing lap times in the wet or riding to a circuit in variable weather, keeping your outer layer genuinely water-repellent matters. Saturated textiles become heavy, cold and restrictive. RainSeal's invisible barrier keeps your jacket, trousers and gloves performing as the manufacturer intended, preserving membrane efficiency and rider comfort lap after lap. For touring and commuting riders, the same protection extends to tank bags, luggage systems and seat covers — a single can handles your entire kit in one session.\u003c\/p\u003e\u003ch2\u003eVersatile Textile Applications\u003c\/h2\u003e\u003cp\u003eRainSeal is not a motorcycle-only product, which makes it an exceptionally practical addition to any garage. Use it on outdoor clothing, hiking gear, tents, canvas covers, footwear and vehicle seat upholstery. The eco-conscious silicon-free formula is a meaningful step cleaner than older fluorocarbon-heavy alternatives, without any compromise to the protective film it lays down.\u003c\/p\u003e\u003ch2\u003eHow to Apply\u003c\/h2\u003e\u003cp\u003eSpray evenly onto a clean, dry textile from approximately 15–20 cm and allow to dry. For best results, reapply every six months or after the garment has been through repeated heavy wash cycles. A light heat activation using a tumble dryer on low or a warm iron over a damp cloth will further improve the bond on treated outer layers.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eSuitable for use on all major textile motorcycle jackets, trousers, gloves and riding suits — including Gore-Tex, Cordura, softshell and woven polyester outer layers. Also effective on cotton canvas, nylon, and multi-fibre blends. Not recommended for pure leather garments (use a dedicated leather conditioner instead).\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Oxford\u003c\/li\u003e\n\u003cli\u003eProduct: Mint RainSeal Waterproofing Spray\u003c\/li\u003e\n\u003cli\u003eVolume: 500 ml\u003c\/li\u003e\n\u003cli\u003eFormula: Silicon-free, eco-friendly\u003c\/li\u003e\n\u003cli\u003eProtection: Water-repellent, dirt-repellent, UV-resistant\u003c\/li\u003e\n\u003cli\u003eBreathability: Maintained — no membrane blocking\u003c\/li\u003e\n\u003cli\u003eCompatible textiles: Polyester, cotton, nylon, mixed-weave fabrics\u003c\/li\u003e\n\u003cli\u003eReapplication interval: Every 6 months (or after repeated washing)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oxford","offers":[{"title":"Default Title","offer_id":53169005789450,"sku":"05704427","price":19.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/RainSeal.png?v=1780818849"}],"url":"https:\/\/inter-pace.com\/collections\/oxford.oembed","provider":"Inter-Pace","version":"1.0","type":"link"}