{"title":"NXR3 Kit","description":"\u003cp\u003eAccessories and add-ons for the Shoei NXR3.\u003c\/p\u003e","products":[{"product_id":"shoei-nxr3-nxr2-visor-base-plate-cwr-f2-without-screws-replacement-shield-mechanism","title":"Shoei NXR3 \/ NXR2 Visor Base Plate CWR-F2 without Screws – Replacement Shield Mechanism","description":"\u003cp\u003eThe base plates are the pivot assemblies on each side of the shell into which the CWR-F2 shield clips. On the NXR3 and the NXR2 they carry the entire opening movement of the visor: every time you crack it open at a toll booth or snap it shut at speed, this mechanism takes the load. This version comes without fixing screws.\u003c\/p\u003e\n\u003ch3\u003eSigns that the mechanism is worn\u003c\/h3\u003e\n\u003cp\u003eA shield that no longer holds its detent positions, drops shut on its own, rattles when closed or no longer presses evenly against the window seal usually points to the base plate rather than the shield. A helmet that has fallen off a seat or mirror often cracks the plastic around the pivot; after many seasons the detents simply lose their bite. If the shield itself is still clear and unscratched, replacing the mechanism restores the action without buying a new visor.\u003c\/p\u003e\n\u003ch3\u003eHelmets it fits\u003c\/h3\u003e\n\u003cp\u003eShoei lists this part for the NXR3 and the NXR2, both of which run the CWR-F2 shield family. The X-SPR PRO uses the CWR-F2R race shield and has its own base plate, listed separately.\u003c\/p\u003e\n\u003ch3\u003eScrews are not part of this item\u003c\/h3\u003e\n\u003cp\u003eUndamaged original screws can go straight back in. If yours are lost, cross-threaded or rounded, order the version with screws instead, part number 18.02.278.0.\u003c\/p\u003e\n\u003ch3\u003eFitting and adjustment\u003c\/h3\u003e\n\u003cp\u003eThe owner's manual of the NXR3 and NXR2 explains how the shield comes off and goes back on. Getting the mechanism adjusted so the shield seals evenly takes a little patience; if you prefer, a Shoei dealer can do it for you.\u003c\/p\u003e","brand":"Shoei","offers":[{"title":"Default Title","offer_id":54089909960970,"sku":"18.02.277.0","price":21.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/shoei-nxr3-nxr2-visor-base-plate-cwr-f2-without-screws-replacement-shield-mechanism.png?v=1794256823"},{"product_id":"shoei-nxr3-nxr2-visor-base-plate-cwr-f2-with-screws-complete-shield-mechanism-kit","title":"Shoei NXR3 \/ NXR2 Visor Base Plate CWR-F2 with Screws – Complete Shield Mechanism Kit","description":"\u003cp\u003eAfter a crash or a hard drop, the visor mechanism is often only half the problem: the fixing screws can bend or the heads get chewed while you try to undo them. This kit covers both. It is the CWR-F2 base plate for the NXR3 and NXR2 supplied together with its screws, so one order gets the shield back on the helmet.\u003c\/p\u003e\n\u003ch3\u003eWhich riders choose this version\u003c\/h3\u003e\n\u003cp\u003eIf you bought a used helmet with mismatched or missing hardware, if a screw has seized in the shell, or if you simply want fresh parts throughout, the complete kit saves a second order. If your original screws are perfect, the plain base plate 18.02.277.0 does the same job without them.\u003c\/p\u003e\n\u003ch3\u003eWhat the base plate does\u003c\/h3\u003e\n\u003cp\u003eIt is the hinge and lock of the shield. It defines the detent positions when you open the CWR-F2 visor and pulls it tight against the window seal when it closes. Once the plastic is cracked or the detents are worn, the visor starts to drift, whistle or let in rain at the edge.\u003c\/p\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eShoei lists the part for the NXR3 and the NXR2. Both helmets use the CWR-F2 shield; the X-SPR PRO with its CWR-F2R race shield takes a different mechanism.\u003c\/p\u003e\n\u003ch3\u003eBefore you start\u003c\/h3\u003e\n\u003cp\u003eFollow the shield removal steps in your helmet's owner's manual and take care not to over-tighten the new screws in the shell. A Shoei dealer can fit and adjust the mechanism if you would rather not do it at home.\u003c\/p\u003e","brand":"Shoei","offers":[{"title":"Default Title","offer_id":54089910386954,"sku":"18.02.278.0","price":23.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/shoei-nxr3-nxr2-visor-base-plate-cwr-f2-with-screws-complete-shield-mechanism-kit.png?v=1794256827"},{"product_id":"shoei-breath-guard-f-nose-deflector-for-nxr3-nxr2-nxr-gt-air-ii-gt-air-neotec-ii-neotec-ryd","title":"Shoei Breath Guard F – Nose Deflector for NXR3, NXR2, NXR, GT-Air II, GT-Air, Neotec II, Neotec, Ryd","description":"\u003cp\u003eEvery rider who has waited at a red light on a cold morning knows the moment: one breath and the visor turns milky from the bottom up. Breath Guard F is the part Shoei uses against exactly that across a whole generation of its helmets – a small black deflector that sits in the nose area of the chin bar and guides exhaled air down and away from the inside of the shield.\u003c\/p\u003e\u003ch3\u003eOne part, eight helmets\u003c\/h3\u003e\u003cp\u003eShoei lists this deflector for the NXR3, NXR2 and NXR, the GT-Air II and the original GT-Air, the Neotec II and the first Neotec, and the Ryd. The same letter F appears on the spare-parts pages of each of those models, so owners of more than one of them can keep a single spare in the garage.\u003c\/p\u003e\u003ch3\u003eSigns that yours is missing or worn\u003c\/h3\u003e\u003cp\u003eThe piece is easy to lose when the interior comes out for washing, and its thin wings can tear after years of being removed and refitted. Without it the lower edge of the visor mists first and clears slowly once you ride off. Used helmets often change hands without one.\u003c\/p\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eShoei points to the owner's manual of the respective helmet for mounting. Follow the steps for your model there; a Shoei dealer can help if the manual is no longer at hand.\u003c\/p\u003e\u003ch3\u003eRealistic expectations\u003c\/h3\u003e\u003cp\u003eA breath guard lowers the fogging tendency, it does not replace an anti-fog insert. On helmets with a Pinlock-ready visor the insert stays the main defence – the deflector keeps the warm, humid air away from it.\u003c\/p\u003e","brand":"Shoei","offers":[{"title":"Default Title","offer_id":54089910649098,"sku":"19.01.010.0","price":12.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/shoei-breath-guard-f-nose-deflector-for-nxr3-nxr2-nxr-gt-air-ii-gt-air-neotec-ii-neotec-ryd-1.png?v=1794238778"},{"product_id":"shoei-chin-curtain-d-mesh-wind-deflector-for-x-spr-pro-x-spirit-iii-nxr3-nxr2-nxr-hornet-adv06-hornet-adv-ryd","title":"Shoei Chin Curtain D Mesh – Wind Deflector for X-SPR PRO, X-Spirit III, NXR3, NXR2, NXR, Hornet ADV06, Hornet ADV, Ryd","description":"\u003cp\u003eMuch of the roar inside a full-face helmet does not come through the shell at all – it climbs in from below, where air swirls between the chin bar and your neck. Chin Curtain D closes that gap. It is the curtain with a mesh insert that Shoei fits across a wide spread of its range, from the X-SPR PRO race helmet to the Hornet ADV dual-sport models.\u003c\/p\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cp\u003eThe part is listed for the X-SPR PRO, X-Spirit III, NXR3, NXR2, NXR, Hornet ADV06, Hornet ADV and Ryd. On the X-SPR PRO this covers both the first version and the PRO 02, which share the same name in our shop.\u003c\/p\u003e\u003ch3\u003eWhy the mesh matters\u003c\/h3\u003e\u003cp\u003eShoei describes the mesh insert as a way to keep the climate inside the helmet pleasant even at higher outside temperatures. A solid curtain would block draughts more completely; the mesh version is the compromise riders choose when they want less turbulence without a stuffy chin area in summer.\u003c\/p\u003e\u003ch3\u003eTypical reasons to reorder\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe curtain went missing after the interior was washed.\u003c\/li\u003e\n\u003cli\u003eThe edge has frayed or the mesh has split.\u003c\/li\u003e\n\u003cli\u003eA second-hand helmet arrived without it.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cp\u003eShoei refers to the owner's manual of your helmet for mounting. If you no longer have it, ask a Shoei dealer before forcing anything into place.\u003c\/p\u003e","brand":"Shoei","offers":[{"title":"Default Title","offer_id":54089910976778,"sku":"19.02.016.0","price":15.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/shoei-chin-curtain-d-mesh-wind-deflector-for-x-spr-pro-x-spirit-iii-nxr3-nxr2-nxr-hornet-adv06-hornet-adv-ryd-1.png?v=1794238785"},{"product_id":"shoei-nxr3-nxr2-x-spr-pro-tear-off-buttons-cwr-f2r-2-pcs-replacement-shield-posts","title":"Shoei NXR3 \/ NXR2 \/ X-SPR PRO Tear-Off Buttons CWR-F2R 2 pcs – Replacement Shield Posts","description":"\u003cp\u003eOn track, a single clean pull of a tear-off restores your view after bugs, oil mist or rubber dust hit the shield. That only works if the film sits under the right tension, and that is the job of these two buttons on the CWR-F2R race shield. They replace the original buttons when one has gone missing, cracked or no longer holds the film properly.\u003c\/p\u003e\n\u003ch3\u003eTwo functions in one part\u003c\/h3\u003e\n\u003cp\u003eOn the outside of the shield the buttons anchor the tear-off films. They are eccentric, so turning them lets you fine-tune the tension of fitted tear-offs. On the inside they double as the pins that hold the Pinlock insert. A damaged button therefore affects both the tear-offs and the anti-fog lens.\u003c\/p\u003e\n\u003ch3\u003eWhich shield and helmets\u003c\/h3\u003e\n\u003cp\u003eThese buttons belong to the CWR-F2R race shield. Shoei names the NXR2 and X-SPR PRO in the product description and also lists the part under the NXR3 spare parts. They do not turn a standard CWR-F2 shield into a race shield; you need the CWR-F2R visor itself.\u003c\/p\u003e\n\u003ch3\u003ePackage\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2 tear-off buttons\u003c\/li\u003e\n\u003cli\u003eFitting instructions, according to Shoei\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePractical note\u003c\/h3\u003e\n\u003cp\u003eBefore a race weekend, check that both buttons turn freely and that the Pinlock still sits tight. Spare buttons are small and easily lost in the paddock, so many riders keep a set in the tool box.\u003c\/p\u003e","brand":"Shoei","offers":[{"title":"Default Title","offer_id":54089911369994,"sku":"19.03.017.0","price":9.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/shoei-nxr3-nxr2-x-spr-pro-tear-off-buttons-cwr-f2r-2-pcs-replacement-shield-posts-1.png?v=1794238793"},{"product_id":"shoei-helmet-bag-universal-grey-fleece-storage-bag-for-all-shoei-helmets","title":"Shoei Helmet Bag Universal Grey – Fleece Storage Bag for All Shoei Helmets","description":"\u003cp\u003eShoei calls it the cap for your cap. The universal helmet bag is the soft fleece sack that protects a helmet on the shelf or in the boot of a car, and Shoei states that it fits all of its helmet models. The product photo shows it in light grey with a large SHOEI logo.\u003c\/p\u003e\n\u003ch3\u003eWhat it protects against\u003c\/h3\u003e\n\u003cp\u003eA helmet stored without cover collects dust in the vents and fine scratches on the shell and visor. In a car or a top case it rubs against other things. The fleece keeps a soft layer between shell and surroundings. It is not padding and not a crash protector, so treat it as a dust and scratch cover.\u003c\/p\u003e\n\u003ch3\u003eWhen riders reorder it\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe original bag from the helmet box is lost or torn.\u003c\/li\u003e\n\u003cli\u003eYou own more than one helmet and want one bag per helmet.\u003c\/li\u003e\n\u003cli\u003eA second-hand helmet came without a bag.\u003c\/li\u003e\n\u003cli\u003eYou want something soft for gloves, a balaclava or a spare visor wrapped separately.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eShoei itself suggests using it for anything else you like to have with you.\u003c\/p\u003e\n\u003ch3\u003eFit\u003c\/h3\u003e\n\u003cp\u003eShoei lists the bag as universal, for every helmet model in its range. That covers the current X-SPR PRO, X-Spirit III, GT-Air3 and GT-Air3 SMART, NXR3, Neotec 3, J-Cruise 3, J.O2, Glamster06, Hornet ADV06 and VFX-WR 06. For the X-SPR PRO and X-Spirit III Shoei also sells a dedicated bag (19.04.005.0), and the larger Racing Bag5 is a separate product.\u003c\/p\u003e\n\u003ch3\u003eCare\u003c\/h3\u003e\n\u003cp\u003eStore the helmet in the bag only when the interior is dry; a damp liner in a closed bag does not air out and starts to smell. After a ride in the rain, let the helmet dry open with the visor raised first. Shake the fleece out from time to time so that grit does not collect inside and rub over the shell the next time.\u003c\/p\u003e\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: fleece\u003c\/li\u003e\n\u003cli\u003eColour: grey, SHOEI logo\u003c\/li\u003e\n\u003cli\u003eFits: all Shoei helmet models\u003c\/li\u003e\n\u003cli\u003ePart number: 19.04.002.0\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Shoei","offers":[{"title":"Default Title","offer_id":54089978413322,"sku":"19.04.002.0","price":11.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/shoei-helmet-bag-universal-grey-fleece-storage-bag-for-all-shoei-helmets-1.png?v=1794239441"},{"product_id":"shoei-sena-usb-charger-srl3-srl2-srl-srl-ext-srl-mesh-5-v-wall-plug","title":"Shoei SENA USB Charger SRL3 \/ SRL2 \/ SRL \/ SRL-EXT \/ SRL Mesh – 5 V Wall Plug","description":"\u003cp\u003eA small part that tends to go missing on the first trip: the SENA USB wall plug charges the battery of every SRL communication system in Shoei's accessory range, from the first SRL up to the SRL3. It carries a CE mark and delivers 5.0 V at 2.0 A, which is 10 W.\u003c\/p\u003e\n\u003ch3\u003eWhich systems and helmets\u003c\/h3\u003e\n\u003cp\u003eShoei names five systems: SRL, SRL2, SRL3, SRL-EXT and SRL Mesh. Those are fitted to different helmets, which is why the list below is long:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSRL3: GT-Air3, Neotec 3, J-Cruise 3, and the NXR3 with its SRL3 adapter kit\u003c\/li\u003e\n\u003cli\u003eSRL2 and SRL Mesh: GT-Air II, Neotec II, J-Cruise II\u003c\/li\u003e\n\u003cli\u003eSRL-EXT: NXR2\u003c\/li\u003e\n\u003cli\u003eSRL: Neotec II\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat it is and what it is not\u003c\/h3\u003e\n\u003cp\u003eThis is the plug only, shown in white with a European two-pin connector and a USB socket. Shoei's description does not mention a cable, so plan to use the USB cable that came with your SRL unit. The plug does not replace a battery or repair a unit that no longer charges; in that case contact SENA support. Because the output is a standard USB socket, it also charges other USB devices, but Shoei lists it for the SRL family.\u003c\/p\u003e\n\u003ch3\u003eCharging tips from SENA\u003c\/h3\u003e\n\u003cp\u003eSENA advises checking the USB port on the intercom for debris before each charge and keeping the rubber cap closed the rest of the time. For the SRL3 it gives a charging temperature range of 0 to 45 °C, so leave a cold helmet indoors for a while before plugging in. On tour it helps to charge overnight, since a full charge of the SRL3 takes about 2.5 hours according to SENA.\u003c\/p\u003e\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOutput: 5.0 V, 2.0 A, 10 W\u003c\/li\u003e\n\u003cli\u003eCertification: CE\u003c\/li\u003e\n\u003cli\u003eConnector: European two-pin plug, USB socket\u003c\/li\u003e\n\u003cli\u003ePart number: 21.01.007.0\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Shoei","offers":[{"title":"Default Title","offer_id":54089986048266,"sku":"21.01.007.0","price":17.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/shoei-sena-usb-charger-srl3-srl2-srl-srl-ext-srl-mesh-5-v-wall-plug-1.png?v=1794239550"}],"url":"https:\/\/inter-pace.com\/collections\/nxr3-kit.oembed","provider":"Inter-Pace","version":"1.0","type":"link"}