{"title":"Instrument holders","description":null,"products":[{"product_id":"febur-fe1383","title":"Febur Aluminium Instrument Bracket for MV Agusta F3 675\/800 (2012-2026) FE1383","description":"\u003cp\u003ePrecision-machined from aircraft-grade aluminium, the Febur FE1383 instrument bracket strips over 900 g from the front end of your MV Agusta F3 675\/800 — a 67% weight reduction that sharpens steering response and removes unnecessary mass exactly where it hurts lap times most. Built to withstand the unrelenting demands of circuit use, this is the bracket that serious F3 campaigners reach for.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDramatic 902 g weight saving: at just 438 g versus the OEM bracket's 1,340 g, the mass reduction is felt immediately in turn-in precision and overall front-end agility.\u003c\/li\u003e\n\u003cli\u003e100% aluminium construction: every gram is accounted for in a single-material design that eliminates the mixed hardware of the stock unit while maintaining a rigid, rattle-free mount.\u003c\/li\u003e\n\u003cli\u003eRace-engineered rigidity: designed specifically for track use, the bracket holds the instrument display absolutely stable under hard braking, high-speed vibration and kerb strikes.\u003c\/li\u003e\n\u003cli\u003eDirect OEM fitment: engineered to bolt on without modification to the MV Agusta F3 675 and F3 800 (2012-2026) — no drilling, no adapters, no guesswork.\u003c\/li\u003e\n\u003cli\u003eAvailable in two variants: choose the correct version for your OEM display or your Magneti Marelli display, ensuring a precise, secure fit for your specific instrument setup.\u003c\/li\u003e\n\u003cli\u003ePart number FE1383: Febur's race-catalogue reference for straightforward ordering and warranty identification.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Materials\u003c\/h2\u003e\u003cp\u003eFebur has built its reputation on components that meet the structural demands of professional motorsport, and the FE1383 is no exception. The bracket is machined entirely from high-quality aluminium — a material chosen not simply for its low density but for its exceptional strength-to-weight ratio and resistance to fatigue under cyclic loading. Where the stock MV Agusta bracket relies on heavier composite and mixed-material construction, the Febur unit condenses all of that function into a single, clean aluminium piece that resists flex, corrosion and the constant vibration inherent to high-revving four-cylinder engines.\u003c\/p\u003e\u003cp\u003eThe machining tolerances are tight enough to ensure a direct, play-free fitment on the F3's steering stem, and every mounting point is reinforced to handle the dynamic loads produced during full-race braking events. This is not a lightweight part that trades durability for grams — it is a part that achieves both simultaneously through intelligent design and precise manufacture.\u003c\/p\u003e\u003ch2\u003ePerformance and Track Use\u003c\/h2\u003e\u003cp\u003eOn a motorcycle as focused as the MV Agusta F3, unsprung and rotating mass reductions deliver measurable benefits. Saving over 900 g from the instrument bracket area — high on the frame, close to the steering axis — reduces the rotational inertia the rider fights through every direction change. The result is a front end that feels more communicative and less reluctant to change direction, particularly in fast chicanes where the cumulative benefit of mass centralisation is most apparent. The FE1383 is developed for race use only and is best suited to track-day and competition builds where every kilogram of unnecessary weight has been systematically eliminated.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis instrument bracket is designed exclusively for the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMV Agusta F3 675 — all variants (2012-2026)\u003c\/li\u003e\n\u003cli\u003eMV Agusta F3 800 — all variants (2012-2026)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSelect the correct variant at the time of ordering: one version is configured for the standard OEM display and one for the Magneti Marelli display. Fitting the wrong variant will result in an incompatible mount, so verify your instrument type before purchase.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eFebur\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eFE1383\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eAluminium (100%)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e438 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOEM weight replaced\u003c\/td\u003e\n\u003ctd\u003e1,340 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight saving\u003c\/td\u003e\n\u003ctd\u003eapprox. 902 g (over 60%)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eMV Agusta F3 675\/800 (2012-2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplay compatibility\u003c\/td\u003e\n\u003ctd\u003eOEM display or Magneti Marelli display (select variant)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntended use\u003c\/td\u003e\n\u003ctd\u003eRace use only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Febur","offers":[{"title":"For OEM Display","offer_id":53167160787210,"sku":"FE1383","price":178.5,"currency_code":"EUR","in_stock":true},{"title":"For Magneti Marelli Display","offer_id":53167160819978,"sku":"FE1319","price":208.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/FE1383.png?v=1780791843"},{"product_id":"aluminium-instrumentenhalter-stk-ducati-panigale-v4-s-r-18-21-von-pierobon","title":"Pierobon STK Aluminium Instrument Bracket for Ducati Panigale V4 \/ V4 S \/ V4 R (2018–2024)","description":"\u003cp\u003eEngineered specifically for the Ducati Panigale V4, V4 S and V4 R across model years 2018 to 2024, the Pierobon STK aluminium instrument bracket delivers a certified, patented solution that cuts up to 30% of the weight versus the standard Ducati component — without compromising rigidity or sensor accuracy. Whether you are preparing for track days or keeping your Panigale road-legal, the STK bracket's two-variant design has you covered.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eUp to 30% lighter than the original Ducati instrument bracket, reducing unsprung and chassis mass for sharper handling response.\u003c\/li\u003e\n\u003cli\u003ePatented Pierobon design with registered intellectual property, reflecting the brand's commitment to quality and innovation in race-proven chassis components.\u003c\/li\u003e\n\u003cli\u003eIntegrated IMU mount for precise inertial measurement unit sensor positioning, essential for accurate lean-angle and traction-control data on modern Panigales.\u003c\/li\u003e\n\u003cli\u003eAvailable in two purpose-specific variants: without headlight bracket for pure circuit use, or with a removable headlight bracket for road-registered machines.\u003c\/li\u003e\n\u003cli\u003ePrecision-machined from high-grade aluminium, ensuring a direct, rattle-free fit on all Ducati Panigale V4, V4 S and V4 R frames from 2018 onwards.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign and Construction\u003c\/h2\u003e\u003cp\u003eThe STK bracket is the result of Pierobon's extensive experience developing chassis add-on parts for competitive Ducati machinery. The aluminium construction retains the structural stiffness the Panigale platform demands, while the patented geometry allows the instrument cluster and IMU to sit in the correct OEM-specified position. Every bracket leaves the Pierobon facility with the finish and dimensional accuracy that serious riders expect from a part bearing a registered design number.\u003c\/p\u003e\u003ch3\u003eTrack and Road Versatility\u003c\/h3\u003e\u003cp\u003eChoosing the version without headlight bracket strips every gram that is not required on circuit, keeping the front end as light as the class rules allow. For riders who commute or tour between track sessions, the variant with removable headlight bracket restores full road-legal lighting compliance without permanent modification — the bracket detaches cleanly when race day arrives.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis bracket is designed and manufactured exclusively for the following motorcycles:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale V4 — 2018, 2019, 2020, 2021, 2022, 2023, 2024\u003c\/li\u003e\n\u003cli\u003eDucati Panigale V4 S — 2018, 2019, 2020, 2021, 2022, 2023, 2024\u003c\/li\u003e\n\u003cli\u003eDucati Panigale V4 R — 2018, 2019, 2020, 2021, 2022, 2023, 2024\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDirect OEM mounting points are used throughout — no drilling or frame modification is required.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Pierobon\u003c\/li\u003e\n\u003cli\u003eModel designation: STK\u003c\/li\u003e\n\u003cli\u003eMaterial: High-grade aluminium\u003c\/li\u003e\n\u003cli\u003eWeight saving: Up to 30% lighter than the original Ducati part\u003c\/li\u003e\n\u003cli\u003eIncludes IMU mount: Yes\u003c\/li\u003e\n\u003cli\u003eVariants: Without headlight bracket \/ With removable headlight bracket\u003c\/li\u003e\n\u003cli\u003eIntended use: Road and track\u003c\/li\u003e\n\u003cli\u003eFitment: Ducati Panigale V4 \/ V4 S \/ V4 R (2018–2024)\u003c\/li\u003e\n\u003cli\u003eDesign: Patented and registered Pierobon design\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pierobon","offers":[{"title":"Without Headlight Bracket","offer_id":53167210856714,"sku":"F10400A1002A","price":698.99,"currency_code":"EUR","in_stock":true},{"title":"With Headlight Bracket","offer_id":53167210889482,"sku":"F10400A0502A","price":818.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/V4Front.png?v=1780792966"},{"product_id":"fe-1551","title":"Febur Aluminium Instrument Bracket for Ducati Panigale V4\/S\/R (2018-2024) – FE1551","description":"\u003cp\u003eMounting your OEM display with confidence under race conditions demands more than a generic bracket. The Febur FE1551 aluminium instrument bracket is precision-engineered for the Ducati Panigale V4\/S\/R (2018–2024), delivering an all-day secure fit whether you are running back-to-back sessions at a circuit or preparing your Panigale for a full racing season. At just 500 g of machined aluminium, it strips unnecessary mass without the slightest compromise to rigidity.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFeatherlight 500 g construction machined from 100% aluminium — genuine weight reduction without sacrificing structural integrity.\u003c\/li\u003e\n\u003cli\u003eDesigned specifically for the OEM display of the Ducati Panigale V4\/S\/R, ensuring a precise, rattle-free fit every time the bike is on track.\u003c\/li\u003e\n\u003cli\u003eRace Use Only specification, built to withstand the vibration, heat and G-forces generated during professional competition.\u003c\/li\u003e\n\u003cli\u003eConsistent, stable display positioning lap after lap — no shifting, no vibration-induced misalignment, no lost data at critical moments.\u003c\/li\u003e\n\u003cli\u003eClean aluminium construction resists the corrosive effects of fuel, coolant and track grime across a full season.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuilt for the Track, Not the Showroom\u003c\/h2\u003e\u003cp\u003eFebur's reputation in the paddock rests on parts that actually perform under pressure. The FE1551 is not a cosmetic upgrade — it is a functional component designed around the structural demands of circuit racing. The bracket is machined to exact tolerances so that the OEM instrument cluster sits exactly where Ducati intended it to, with no play and no unwanted flex through the steering. Riders who spend long days at the circuit, running multiple practice and race stints, will appreciate how the secure, well-considered mounting eliminates the distraction of a vibrating or shifting display.\u003c\/p\u003e\u003ch3\u003eAluminium: The Right Material Choice\u003c\/h3\u003e\u003cp\u003eChoosing aluminium over heavier steel or composite alternatives means the FE1551 contributes directly to overall weight reduction — every gram saved on unsprung and reciprocating mass translates to sharper handling and faster lap times on technical circuits. The material's inherent stiffness-to-weight ratio makes it ideal for a bracket that must hold a display perfectly still while absorbing the road noise and kerb strikes that are part of any serious race weekend.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThe Febur FE1551 is engineered exclusively for the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale V4 (2018–2024)\u003c\/li\u003e\n\u003cli\u003eDucati Panigale V4 S (2018–2024)\u003c\/li\u003e\n\u003cli\u003eDucati Panigale V4 R (2018–2024)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCompatible with the factory OEM display unit. Race Use Only — not intended for road registration use.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Febur\u003c\/li\u003e\n\u003cli\u003ePart number: FE1551\u003c\/li\u003e\n\u003cli\u003eMaterial: Aluminium (100%)\u003c\/li\u003e\n\u003cli\u003eWeight: 500 g\u003c\/li\u003e\n\u003cli\u003eDisplay compatibility: OEM Ducati Panigale V4\/S\/R instrument cluster\u003c\/li\u003e\n\u003cli\u003eFitment: Ducati Panigale V4, V4 S, V4 R (2018–2024)\u003c\/li\u003e\n\u003cli\u003eIntended use: Race Use Only\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Febur","offers":[{"title":"Default Title","offer_id":53168718151946,"sku":"FE1551","price":273.7,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/FE1551.png?v=1780812318"},{"product_id":"febur-fe1590","title":"Febur Aluminium Instrument Bracket Honda CBR 1000 RR-R SC82 (2020-2026) FE1590","description":"\u003cp\u003eMachined from 100% aluminium and tipping the scales at just 200 g, the Febur FE1590 instrument bracket is engineered to the uncompromising tolerances demanded by professional circuit racing. Designed exclusively for the Honda CBR 1000 RR-R SC82, it delivers a secure, rattle-free mount for the OEM display without adding unnecessary mass to the front end.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFull aluminium construction throughout — zero plastic compromise, outstanding rigidity-to-weight ratio\u003c\/li\u003e\n\u003cli\u003eWeighs just 200 g, contributing directly to a lower overall machine weight and sharper track handling\u003c\/li\u003e\n\u003cli\u003ePrecision fitment for the OEM Honda CBR 1000 RR-R SC82 display — no modifications required\u003c\/li\u003e\n\u003cli\u003eRace Use Only specification, built to withstand the vibration and stress loads of sustained high-performance track use\u003c\/li\u003e\n\u003cli\u003ePart number FE1590 — straightforward reorder and warranty identification\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Materials\u003c\/h2\u003e\u003cp\u003eFebur's reputation rests on the quality of its raw material and manufacturing process, and the FE1590 is no exception. The bracket is produced entirely from high-grade aluminium billet, selected for its combination of low density and structural integrity. Every surface and mounting interface is machined to tight tolerances, ensuring the display seats firmly and stays put through the harshest braking zones and kerb strikes. The result is a component that feels immediately premium in the hand and inspires confidence once fitted.\u003c\/p\u003e\u003ch2\u003ePerformance on Track\u003c\/h2\u003e\u003cp\u003eAt 200 g, the FE1590 is one of the lightest options available for the SC82 platform. That weight saving, modest as it sounds in isolation, sits at the front of the motorcycle where unsprung and rotating mass has the greatest influence on steering feel and flick-ability. Riders chasing lap times at the detail level will appreciate a bracket that holds the display absolutely steady under braking whilst contributing nothing unnecessary to the scales. Febur designed this bracket for Race Use Only — it is a focused tool for focused competitors, not a cosmetic upgrade.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThe FE1590 is designed and manufactured specifically for the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eHonda CBR 1000 RR-R SC82 — model years 2020 to 2026\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eIt accepts the factory OEM instrument display without alteration. This bracket is not intended for road use and is supplied for track and competition applications only.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eFebur\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eFE1590\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e100% aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e200 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDisplay Compatibility\u003c\/th\u003e\n\u003ctd\u003eOEM Honda CBR 1000 RR-R SC82 display\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment\u003c\/th\u003e\n\u003ctd\u003eHonda CBR 1000 RR-R SC82 (2020-2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntended Use\u003c\/th\u003e\n\u003ctd\u003eRace Use Only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Febur","offers":[{"title":"Default Title","offer_id":53168718184714,"sku":"FE1590","price":196.35,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/FE1590.png?v=1780812320"},{"product_id":"febur-fe1318","title":"Febur Aluminium Instrument Bracket for Kawasaki ZX-10 R (2011-2015) – FE1318","description":"\u003cp\u003eDesigned exclusively for race use, the Febur FE1318 aluminium instrument bracket gives Kawasaki ZX-10 R competitors a precision-engineered, 174 g mounting solution that keeps the OEM display locked securely in place under the harshest track conditions — without adding unnecessary mass to the front end.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConstructed from 100% aluminium for an outstanding strength-to-weight ratio at just 174 g\u003c\/li\u003e\n\u003cli\u003ePrecision-engineered to accept the Kawasaki ZX-10 R OEM display — no modification required\u003c\/li\u003e\n\u003cli\u003eRace Use Only specification, built to withstand the vibration and stress of professional competition\u003c\/li\u003e\n\u003cli\u003eReplaces the heavier stock bracket, contributing directly to overall weight reduction and improved handling\u003c\/li\u003e\n\u003cli\u003eHigh-quality machining ensures consistent fit and long service life across multiple race seasons\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuilt for the Track\u003c\/h2\u003e\u003cp\u003eFebur developed the FE1318 with one environment in mind: the circuit. Every gram matters when lap times are at stake, and this bracket trims weight from the front assembly without compromising the rigid, rattle-free mounting that a professional rider demands. At 174 g, it undercuts the original unit noticeably, and the full-aluminium construction means it absorbs and dissipates vibration cleanly across a full race distance.\u003c\/p\u003e\u003cp\u003eThe bracket interfaces directly with the ZX-10 R's OEM display, so there is no need for adaptors or custom fabrication. Fitment is straightforward, and the result is a display position that remains stable whether the bike is threading through a fast chicane or braking hard into a hairpin.\u003c\/p\u003e\u003ch2\u003eRace Use Only — Important Safety Note\u003c\/h2\u003e\u003cp\u003eThis component is rated for race use only and is not intended for road use. It must be installed by a qualified mechanic familiar with track-prepared machinery. Riders competing under series regulations should verify that aftermarket instrument brackets are permitted under their applicable technical rules before fitting.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThe Febur FE1318 is designed specifically for the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eKawasaki ZX-10 R — model years 2011, 2012, 2013, 2014, 2015\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eFebur\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eFE1318\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e100% aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e174 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplay compatibility\u003c\/td\u003e\n\u003ctd\u003eKawasaki ZX-10 R OEM display\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntended use\u003c\/td\u003e\n\u003ctd\u003eRace use only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eKawasaki ZX-10 R (2011–2015)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Febur","offers":[{"title":"Default Title","offer_id":53168718217482,"sku":"FE1318","price":166.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/FE1318.png?v=1780812320"},{"product_id":"febur-fe1403","title":"Febur Aluminium Instrument Bracket for Kawasaki ZX-10 R\/RR (2016-2020) – FE1403","description":"\u003cp\u003eWhen every gram counts on track, the Febur FE1403 aluminium instrument bracket delivers a confident, rattle-free mount for the Kawasaki ZX-10 R\/RR OEM display — all day, every session, without compromise. Machined entirely from aluminium and weighing just 210 g, it strips unnecessary mass from the cockpit while keeping your instrumentation exactly where you need it, lap after lap.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eUltralight 210 g construction machined from 100% aluminium for meaningful weight reduction without sacrificing rigidity\u003c\/li\u003e\n\u003cli\u003eDesigned specifically for the OEM display of the Kawasaki ZX-10 R\/RR — no adapters, no guesswork, a precise drop-in fit\u003c\/li\u003e\n\u003cli\u003eRace-optimised geometry holds the display securely under the sustained vibration and loading of competitive track use\u003c\/li\u003e\n\u003cli\u003ePremium aluminium build ensures long-term durability and resistance to the harsh conditions of race environments\u003c\/li\u003e\n\u003cli\u003eRace Use Only designation reflects the focused, no-compromise engineering behind this bracket\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuilt for the Track\u003c\/h2\u003e\u003cp\u003eThe Febur FE1403 is not a road accessory dressed up in racing language — it is a purpose-built component developed exclusively for competitive motorcycle racing. The all-aluminium construction keeps the bracket light and torsionally stiff, so the display sits stable and readable through braking zones, high-speed straights and aggressive cornering alike. At 210 g, it contributes directly to reducing total motorcycle weight, which feeds into sharper handling response and a more connected feel from the cockpit.\u003c\/p\u003e\u003ch2\u003ePrecision Fitment\u003c\/h2\u003e\u003cp\u003eEvery dimension of the FE1403 is engineered around the factory instrument cluster of the ZX-10 R and ZX-10 RR, meaning the OEM display mounts cleanly without modification. The bracket integrates with the existing mounting points, keeping the installation straightforward and the end result clean and professional — the kind of finish that matters in a technical scrutineering environment.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis bracket fits the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKawasaki ZX-10 R (2016, 2017, 2018, 2019, 2020)\u003c\/li\u003e\n\u003cli\u003eKawasaki ZX-10 RR (2016, 2017, 2018, 2019, 2020)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eFebur\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eFE1403\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e100% aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e210 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntended Use\u003c\/td\u003e\n\u003ctd\u003eRace Use Only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplay Compatibility\u003c\/td\u003e\n\u003ctd\u003eOEM display, Kawasaki ZX-10 R\/RR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eKawasaki ZX-10 R\/RR (2016–2020)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Febur","offers":[{"title":"Default Title","offer_id":53168718250250,"sku":"FE1403","price":166.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/FE1403.png?v=1780812320"},{"product_id":"febur-fe1495","title":"Febur Aluminium Instrument Bracket for Suzuki GSX-R 1000 (2017-2023) FE1495","description":"\u003cp\u003ePurpose-built for the GSX-R 1000 in its 2017-2023 generation, the Febur FE1495 aluminium instrument bracket is a race-grade solution that eliminates unnecessary mass without compromising the secure, vibration-resistant mounting your OEM display demands on track. At just 445 grams and machined from 100% aluminium, it sets the standard for lightweight rigidity in serious competition builds.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWeighs only 445 g — a meaningful reduction over stock steel alternatives that contributes directly to improved handling response and lap-time potential.\u003c\/li\u003e\n\u003cli\u003eConstructed entirely from aluminium for an exceptional strength-to-weight ratio that holds firm under the sustained vibration and loading of race conditions.\u003c\/li\u003e\n\u003cli\u003eDesigned specifically to accept the OEM display of the Suzuki GSX-R 1000 (2017-2023), ensuring a precise, rattle-free fit with no modification required.\u003c\/li\u003e\n\u003cli\u003eRace Use Only designation confirms this bracket is engineered and validated to the performance expectations of professional competition, not road compliance.\u003c\/li\u003e\n\u003cli\u003eClean, purposeful construction that integrates seamlessly with race-prepared GSX-R 1000 fairing setups and data-logging configurations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuilt for the Track, Not the Compromise\u003c\/h2\u003e\u003cp\u003eFebur has a long-standing reputation in Superbike and Supersport paddocks for producing chassis components that teams and privateer racers trust when tenths matter. The FE1495 reflects that philosophy: every gram has a reason to be there, and nothing that isn't strictly necessary makes it onto the finished part. The all-aluminium construction resists fatigue cracking over a full race season, and the bracket's geometry has been developed around the GSX-R 1000's specific steering head and fairing architecture rather than adapted from a generic design.\u003c\/p\u003e\u003ch2\u003eRace Use Only — What That Means\u003c\/h2\u003e\u003cp\u003eThis bracket carries a Race Use Only classification. It is intended exclusively for closed-circuit competition and track-day use. It is the buyer's responsibility to ensure compliance with the regulations of any event or series in which the part is used. This designation also means the bracket has not been assessed for road homologation, and Inter-Pace recommends it is not fitted to road-registered machines.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThe Febur FE1495 instrument bracket is a direct-fit part for the following:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eSuzuki GSX-R 1000 — model years 2017, 2018, 2019, 2020, 2021, 2022, 2023\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eDesigned to mount the OEM display unit. Confirm your display configuration before ordering if any aftermarket dash or logging equipment is being used in place of the standard instrument cluster.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart number: FE1495\u003c\/li\u003e\n\u003cli\u003eBrand: Febur\u003c\/li\u003e\n\u003cli\u003eMaterial: 100% aluminium\u003c\/li\u003e\n\u003cli\u003eWeight: 445 g\u003c\/li\u003e\n\u003cli\u003eDisplay compatibility: OEM display, Suzuki GSX-R 1000 (2017-2023)\u003c\/li\u003e\n\u003cli\u003eFitment: Suzuki GSX-R 1000, 2017-2023\u003c\/li\u003e\n\u003cli\u003eIntended use: Race Use Only\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Febur","offers":[{"title":"Default Title","offer_id":53168718348554,"sku":"FE1495","price":196.35,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/FE1495.png?v=1780812324"},{"product_id":"febur-fe1405","title":"Febur Aluminium Instrument Bracket for Yamaha YZF-R3 (2015-2018) FE1405","description":"\u003cp\u003eA clean, no-compromise mounting solution for your Yamaha YZF-R3's OEM display, the Febur FE1405 aluminium instrument bracket delivers genuine weight savings — just 290 g — without sacrificing the rigidity needed to keep your instruments reading true at every rev. Whether you are preparing for a track day or simply refreshing a worn-out original, this bracket slots straight in and gets the job done.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWeighs only 290 g — a straightforward weight reduction over the standard plastic assembly with no trade-off in stiffness.\u003c\/li\u003e\n\u003cli\u003eManufactured from 100% aluminium for a lasting combination of low mass and high structural integrity.\u003c\/li\u003e\n\u003cli\u003eDesigned specifically to accept the OEM display of the Yamaha YZF-R3, so fitment is precise and no modification is required.\u003c\/li\u003e\n\u003cli\u003eRace-optimised construction that meets the demands of professional circuit use, while remaining equally practical for track-day riders.\u003c\/li\u003e\n\u003cli\u003ePart number FE1405 ensures you can order the correct bracket with confidence — no guesswork.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Everyday Practicality\u003c\/h2\u003e\u003cp\u003eFebur engineer each bracket from solid aluminium stock, machining tolerances tight enough that the OEM display mounts without play or vibration. The result is a bracket that feels premium the moment you pick it up — notably lighter than the standard unit, yet completely unyielding when bolted in place. For club racers who swap displays between bikes or need a dependable spare, the FE1405 represents straightforward, honest value: you pay for material and precision, not branding.\u003c\/p\u003e\u003ch2\u003eTrack Performance\u003c\/h2\u003e\u003cp\u003eDesignated Race Use Only, the FE1405 has been developed with the specific vibration and loading profile of circuit riding in mind. Aluminium's natural damping characteristics protect the display from the high-frequency inputs common on abrasive race tracks, while the bracket's low mass contributes to a marginal but real reduction in unsprung and rotating weight up front. Every gram saved at the cockpit is a gram that does not have to be managed through the fork.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis bracket is a direct fitment for the following motorcycle:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eYamaha YZF-R3 — model years 2015, 2016, 2017, 2018\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThe bracket is designed to accept the standard OEM instrument display for the above model years. If your R3 has been fitted with an aftermarket dashboard, verify display dimensions and mounting hole spacing before ordering.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eFebur\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eFE1405\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e100% aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e290 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDisplay Compatibility\u003c\/th\u003e\n\u003ctd\u003eOEM display, Yamaha YZF-R3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment\u003c\/th\u003e\n\u003ctd\u003eYamaha YZF-R3 (2015-2018)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntended Use\u003c\/th\u003e\n\u003ctd\u003eRace use only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Febur","offers":[{"title":"Default Title","offer_id":53168718381322,"sku":"FE1405","price":154.7,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/FE1405.png?v=1780812328"},{"product_id":"febur-fe1569","title":"Febur Aluminium Instrument Bracket for Yamaha YZF-R3 (2019-2024) – FE1569","description":"\u003cp\u003ePrecision-machined from 100% aluminium, the Febur FE1569 instrument bracket strips unnecessary mass from your Yamaha YZF-R3 without compromising a single degree of rigidity. At just 380 g, it holds the OEM display exactly where it belongs — firmly planted through every braking zone and chicane of a race day.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConstructed entirely from high-grade aluminium for an exceptional strength-to-weight ratio that cheaper steel alternatives simply cannot match.\u003c\/li\u003e\n\u003cli\u003eWeighs just 380 g, delivering a measurable reduction in unsprung and upper-fairing mass that sharpens handling on track.\u003c\/li\u003e\n\u003cli\u003ePrecision-engineered fitment for the Yamaha YZF-R3 OEM display — no adapters, no shimming, no guesswork.\u003c\/li\u003e\n\u003cli\u003eDeveloped exclusively for race use, meeting the demands of professional club and circuit racers who cannot afford display vibration or movement at speed.\u003c\/li\u003e\n\u003cli\u003eClean, purposeful finish consistent with Febur's reputation for track-grade aluminium chassis components.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Materials\u003c\/h2\u003e\u003cp\u003eFebur designed the FE1569 with a single priority: give race-prepared R3s a bracket that earns its place on the weight sheet. The aluminium construction is not an afterthought — every gram saved at the instrument cluster contributes to the overall balance and turn-in response that separates a properly built race bike from a stock one. The material resists the thermal cycling, vibration and incidental contact that characterise circuit environments, so you can focus on lap times rather than bracket integrity.\u003c\/p\u003e\u003ch2\u003eTrack Performance\u003c\/h2\u003e\u003cp\u003eRace use demands hardware that remains absolutely secure under the punishment of kerb strikes, aggressive braking and sustained high-frequency vibration. The FE1569 is built to those standards from the outset, making it the natural choice for riders competing in Yamaha R3 Cup events, club racing or any track day programme where the OEM plastic bracket has already proven inadequate. Reliability at the circuit is non-negotiable, and Febur's aluminium construction delivers exactly that.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThe Febur FE1569 is designed to fit the following motorcycle:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eYamaha YZF-R3 — model years 2019, 2020, 2021, 2022, 2023, 2024\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eAccepts the standard Yamaha YZF-R3 OEM instrument display without modification. Race use only — not intended for road registration.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eFebur\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eFE1569\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e100% aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e380 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplay compatibility\u003c\/td\u003e\n\u003ctd\u003eYamaha YZF-R3 OEM instrument display\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eYamaha YZF-R3 (2019–2024)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntended use\u003c\/td\u003e\n\u003ctd\u003eRace use only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Febur","offers":[{"title":"Default Title","offer_id":53168718414090,"sku":"FE1569","price":154.7,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/FE1569.png?v=1780812330"},{"product_id":"febur-1543","title":"Febur Aluminium Instrument Bracket for Yamaha YZF-R6 RJ15 (2008-2016) FE1543","description":"\u003cp\u003eEngineered exclusively for race use, the Febur FE1543 aluminium instrument bracket gives your Yamaha YZF-R6 RJ15 a clean, secure OEM display mount that weighs just 256 grams. Every gram counts on track, and this bracket delivers the structural rigidity you need without the bulk — a precision-made solution for riders who demand reliability from every component on the bike.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFeatherweight 256 g construction machined from 100% aluminium for maximum strength-to-weight ratio.\u003c\/li\u003e\n\u003cli\u003eDesigned specifically for the Yamaha YZF-R6 RJ15 OEM display, ensuring an exact, rattle-free fit without modification.\u003c\/li\u003e\n\u003cli\u003eRace Use Only specification — built to withstand the sustained vibration and stress loads generated during professional circuit competition.\u003c\/li\u003e\n\u003cli\u003ePremium aluminium construction resists corrosion and maintains structural integrity across the full range of track operating conditions.\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on installation replaces the standard bracket with no fabrication or cutting required.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuilt for the Demands of the Circuit\u003c\/h2\u003e\u003cp\u003eThe Febur FE1543 is not a road compromise — it is a purpose-built race component. The bracket is machined from high-grade aluminium, a material chosen for its exceptional stiffness-per-gram performance. At 256 g, it contributes meaningful weight savings compared with heavier OEM equivalents, helping to lower the overall mass of the front end without sacrificing the solid mounting that a display requires to remain legible and undamaged through kerb strikes and high-speed vibration.\u003c\/p\u003e\u003cp\u003eFebur has developed this bracket to complement the ergonomics and cockpit layout of the RJ15 generation R6 precisely. The mounting geometry keeps the OEM display in its designed position, preserving sight lines and ensuring the instrument cluster integrates cleanly with any race fairing configuration used on the 2008-to-2016 platform.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis bracket is confirmed to fit the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eYamaha YZF-R6 RJ15 — model years 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eDesigned for use with the OEM display unit. Race Use Only — not intended or approved for road use.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eFebur\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eFE1543\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e100% aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e256 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplay compatibility\u003c\/td\u003e\n\u003ctd\u003eOEM display, Yamaha YZF-R6 RJ15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntended use\u003c\/td\u003e\n\u003ctd\u003eRace Use Only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eYamaha YZF-R6 RJ15 (2008-2016)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Febur","offers":[{"title":"Default Title","offer_id":53168718446858,"sku":"FE1543","price":190.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/FE1543.png?v=1780812331"},{"product_id":"febur-1496","title":"Febur Aluminium Instrument Bracket for Yamaha YZF-R6 RJ27 (2017-2026) FE1496","description":"\u003cp\u003eMachined from solid aluminium and tipping the scales at just 270 g, the Febur FE1496 instrument bracket is purpose-built for the Yamaha YZF-R6 RJ27 — a no-compromise race component that strips unwanted mass from the front end without sacrificing the rigidity your OEM display demands at speed.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e100% aluminium construction delivers an outstanding strength-to-weight ratio — robust enough for full race conditions, light enough to make a genuine difference on lap times.\u003c\/li\u003e\n\u003cli\u003eWeighs just 270 g, directly reducing front-end unsprung mass and contributing to sharper, more precise handling on track.\u003c\/li\u003e\n\u003cli\u003eDesigned specifically to accept the OEM Yamaha YZF-R6 RJ27 display, ensuring a precise, rattle-free fit without modification or adaptor plates.\u003c\/li\u003e\n\u003cli\u003eOptimised for race use, meeting the durability and vibration-resistance demands of professional circuit riding.\u003c\/li\u003e\n\u003cli\u003eNeat, purposeful lines that complement the R6's aggressive bodywork — function and form considered together.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Materials\u003c\/h2\u003e\u003cp\u003eFebur's reputation in the paddock is built on materials selection and machining precision, and the FE1496 is a clear example of that philosophy. The entire bracket is produced from high-grade aluminium — chosen for its corrosion resistance, stiffness under vibration, and the ease with which it can be machined to tight tolerances. At 270 g, the finished piece is impressively light, yet there is no flex when the display is fitted and the bike is subjected to the kerb strikes and high-frequency vibration typical of circuit use. Every mounting point is machined rather than pressed, so the fit is consistent unit to unit and the display stays exactly where you set it for the entire race distance.\u003c\/p\u003e\u003ch2\u003eTrack Performance\u003c\/h2\u003e\u003cp\u003eOn a circuit-prepared YZF-R6 RJ27, every gram removed from the front end improves the bike's agility through direction changes and reduces the rotational inertia that slows turn-in response. The FE1496 replaces heavier OEM hardware with a leaner, stiffer alternative that keeps the instrument cluster securely in the rider's line of sight. This is a Race Use Only component, engineered to perform under the elevated stress of repeated braking, hard acceleration, and the vibration environments found on racing circuits — not a cosmetic upgrade repurposed from road hardware.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThe Febur FE1496 is designed exclusively for the following:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eYamaha YZF-R6, chassis code RJ27, model years 2017 to 2026\u003c\/li\u003e\n\u003cli\u003eFits the standard OEM instrument display — no additional adaptor required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eFebur\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eFE1496\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eInstrument bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e100% aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e270 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntended Use\u003c\/th\u003e\n\u003ctd\u003eRace use only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDisplay Compatibility\u003c\/th\u003e\n\u003ctd\u003eOEM Yamaha YZF-R6 RJ27 instrument display\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment\u003c\/th\u003e\n\u003ctd\u003eYamaha YZF-R6 RJ27 (2017-2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Febur","offers":[{"title":"Default Title","offer_id":53168718610698,"sku":"FE1496","price":190.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/FE1496.png?v=1780812341"},{"product_id":"febur-fe1583","title":"Febur Aluminium Instrument Bracket for Yamaha YZF-R1\/M RN65 (2020-2026) – FE1583","description":"\u003cp\u003eFebur's aluminium instrument bracket FE1583 is a precision-machined, race-developed mount that replaces the standard dashboard carrier on the Yamaha YZF-R1 and YZF-R1M RN65 with something altogether more purposeful. Weighing just 254 grams and machined from solid aluminium, it is the kind of uncompromising detail work that separates a track-day build from a genuinely race-ready machine.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWeighs only 254 g — a meaningful reduction over the OEM carrier without sacrificing rigidity\u003c\/li\u003e\n\u003cli\u003e100% aluminium construction for a combination of structural strength and minimal mass\u003c\/li\u003e\n\u003cli\u003eDesigned to accept the factory OEM display, ensuring a clean, no-adapter installation\u003c\/li\u003e\n\u003cli\u003eEngineered specifically for race use, meeting the demands of professional competition\u003c\/li\u003e\n\u003cli\u003eExact fitment for Yamaha YZF-R1 and YZF-R1M RN65 models, model years 2020 to 2026\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign, Finish and Heritage\u003c\/h2\u003e\u003cp\u003eFebur has built its reputation on components that look as considered as they perform. The FE1583 reflects that philosophy: the aluminium billet is machined to close tolerances, giving the bracket a finished appearance that holds up under close scrutiny in the pits as well as at speed. Every edge, every mounting face speaks to a company that has spent years refining chassis and add-on parts for the demands of circuit racing. Where lesser brackets compromise on either aesthetics or engineering, Febur refuses to separate the two.\u003c\/p\u003e\u003ch2\u003eRace-Use Performance\u003c\/h2\u003e\u003cp\u003eThe bracket carries a Race Use Only designation, which means every design decision has been made with the track in mind. Aluminium at this application resists the vibration cycles and thermal variation of sustained circuit running, keeping the OEM display secure and properly oriented lap after lap. The weight saving contributes to a marginal but real reduction in unsprung and front-end mass, which feeds back through steering feel and overall handling balance — exactly the kind of detail that matters when lap times are on the line.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThe Febur FE1583 instrument bracket is designed exclusively for the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eYamaha YZF-R1 RN65 — model years 2020 to 2026\u003c\/li\u003e\n\u003cli\u003eYamaha YZF-R1M RN65 — model years 2020 to 2026\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe bracket is designed to mount the standard OEM display unit. Compatibility with aftermarket dashboard systems should be verified before purchase.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eFebur\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eFE1583\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e254 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplay compatibility\u003c\/td\u003e\n\u003ctd\u003eOEM display\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntended use\u003c\/td\u003e\n\u003ctd\u003eRace use only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eYamaha YZF-R1 \/ YZF-R1M RN65 (2020–2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Febur","offers":[{"title":"Default Title","offer_id":53168718643466,"sku":"FE1583","price":190.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/FE1583.png?v=1780812342"},{"product_id":"febur-fe1360","title":"Febur Aluminium Instrument Bracket for Yamaha YZF-R1\/M RN32 RN49 (2015-2019) FE1360","description":"\u003cp\u003eShed unnecessary weight without compromising rigidity. The Febur FE1360 aluminium instrument bracket is purpose-built for the Yamaha YZF-R1 and YZF-R1M (RN32 \/ RN49, 2015-2019), giving you a clean, secure OEM display mount that weighs just 280 grams — a genuine everyday upgrade whether you are prepping a track bike or simply keeping your road R1 tidy and reliable.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMachined from 100% aluminium for an outstanding strength-to-weight ratio at only 280 g\u003c\/li\u003e\n\u003cli\u003eDesigned specifically to accept the OEM Yamaha YZF-R1\/M dashboard display — no adapter, no improvisation\u003c\/li\u003e\n\u003cli\u003eRigid, vibration-resistant mounting keeps the instrument cluster secure under hard acceleration and braking\u003c\/li\u003e\n\u003cli\u003eRace-use construction that translates directly to real-world durability for road riders who want the best\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on fitment to RN32 and RN49 frame variants — no modification required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Everyday Usability\u003c\/h2\u003e\u003cp\u003eFebur developed the FE1360 with a single brief: remove mass from areas where mass does not need to be. The bracket replaces the heavier OEM item with a piece machined entirely from aluminium, yet the engineering ensures there is no trade-off in stiffness. The display sits as solidly as it would on a stock bike, which matters as much on a Sunday road ride as it does in the pits. At 280 g, the weight saving is measurable and the quality of finish reflects Febur's Italian manufacturing standards throughout.\u003c\/p\u003e\u003ch2\u003eTrack-Developed, Road-Ready\u003c\/h2\u003e\u003cp\u003eAlthough the FE1360 carries a race-use designation — reflecting the environment in which it was developed and validated — the bracket is equally suited to a road-registered R1 or R1M where the owner wants professional-grade components at every contact point. The aluminium construction resists corrosion, handles the thermal and vibration loads of everyday riding, and requires no maintenance beyond standard checks during a service.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThe Febur FE1360 is engineered exclusively for the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eYamaha YZF-R1 RN32 (2015-2019)\u003c\/li\u003e\n\u003cli\u003eYamaha YZF-R1M RN49 (2015-2019)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCompatible with the standard OEM instrument display fitted to these model years. Always verify your frame code before ordering if your machine has been subject to any non-standard modifications.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart number: FE1360\u003c\/li\u003e\n\u003cli\u003eBrand: Febur\u003c\/li\u003e\n\u003cli\u003eMaterial: 100% aluminium\u003c\/li\u003e\n\u003cli\u003eWeight: 280 g\u003c\/li\u003e\n\u003cli\u003eIntended use: Race use \/ track\u003c\/li\u003e\n\u003cli\u003eDisplay compatibility: OEM Yamaha YZF-R1\/M instrument cluster\u003c\/li\u003e\n\u003cli\u003eFitment: Yamaha YZF-R1 RN32 \/ YZF-R1M RN49, 2015-2019\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Febur","offers":[{"title":"Default Title","offer_id":53168718676234,"sku":"FE1360","price":190.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/FE1360.png?v=1780812344"}],"url":"https:\/\/inter-pace.com\/collections\/instrument-holders.oembed","provider":"Inter-Pace","version":"1.0","type":"link"}