{"title":"Eliminators","description":null,"products":[{"product_id":"jetprime-jp-es-008","title":"JetPrime Clutch Switch Eliminator for Aprilia RS 660 (2020-2026) – JP ES 008","description":"\u003cp\u003eDesigned and tested specifically for the Aprilia RS 660 across model years 2020 to 2026, the JetPrime JP ES 008 clutch switch eliminator bypasses the clutch switch entirely and suppresses the resulting dashboard fault codes — a clean, race-ready solution engineered to the same standards JetPrime applies across its competition electronics range.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBypasses the clutch switch cleanly, eliminating fault codes at the source rather than masking them after the fact\u003c\/li\u003e\n\u003cli\u003eSuppresses dashboard error warnings triggered by clutch switch removal or modification\u003c\/li\u003e\n\u003cli\u003ePlug-and-play fitment using an OEM-spec connector — no wire cutting, no splicing, no irreversible modifications\u003c\/li\u003e\n\u003cli\u003eDeveloped and validated exclusively for the Aprilia RS 660 (2020-2026) to guarantee correct electrical compatibility\u003c\/li\u003e\n\u003cli\u003ePremium-grade components throughout, ensuring long service life even under the demands of track use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEngineering \u0026amp; Build Quality\u003c\/h2\u003e\u003cp\u003eThe JP ES 008 arrives with a factory-matched OEM connector that drops directly into the RS 660's existing wiring loom. Because the fitment is purely plug-and-play, the original harness remains completely intact — a critical consideration for bikes that may need to return to standard specification. JetPrime's choice of high-quality internal components means the eliminator holds up reliably through repeated heat cycles and the vibration loads common in track environments.\u003c\/p\u003e\u003ch2\u003eTrack Application\u003c\/h2\u003e\u003cp\u003eOn the circuit, an active clutch switch can interfere with launch control strategies, quickshifter calibration, and other electronic rider aids. The JetPrime eliminator removes that variable cleanly, letting the RS 660's electronics operate without unwanted clutch-switch inputs. Installation takes only minutes and requires no specialist tools — making this one of the most straightforward electronic upgrades available for the platform.\u003c\/p\u003e\u003ch2\u003eSafety \u0026amp; Compliance Notice\u003c\/h2\u003e\u003cp\u003eThis product is approved for race and track use only. It is not approved for use on public roads. Fitting this eliminator to a road-registered motorcycle may render the vehicle non-compliant with applicable road traffic regulations. Always verify the regulations of your circuit or racing series before fitting.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis eliminator is designed exclusively for the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eAprilia RS 660 — model years 2020, 2021, 2022, 2023, 2024, 2025, 2026\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: JetPrime\u003c\/li\u003e\n\u003cli\u003ePart number: JP ES 008\u003c\/li\u003e\n\u003cli\u003eType: Clutch switch eliminator\u003c\/li\u003e\n\u003cli\u003eConnector: OEM-spec plug-and-play connector\u003c\/li\u003e\n\u003cli\u003eInstallation: No wire cutting required\u003c\/li\u003e\n\u003cli\u003eIntended use: Race and track use only\u003c\/li\u003e\n\u003cli\u003eFitment: Aprilia RS 660 (2020-2026)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168760783114,"sku":"JP ES 008","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ES_008.png?v=1780813930"},{"product_id":"jetprime-jp-es-kit-02","title":"JetPrime Eliminator Set Front \u0026 Rear Light JP ES KIT 02 – Aprilia RS 660 (2020-2026)","description":"\u003cp\u003eWhen you remove the front and rear indicators from your Aprilia RS 660 for track use, the dashboard throws persistent fault warnings that break your focus mid-session. The JetPrime Eliminator Set JP ES KIT 02 resolves this cleanly: plug it in, clear the errors, and ride without distraction — no cutting, no splicing, no coding required.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEliminates dashboard fault warnings triggered by removed front and rear lights on the Aprilia RS 660\u003c\/li\u003e\n\u003cli\u003ePlug-and-play fitment using OEM-matching connectors — installs in minutes without cutting a single wire\u003c\/li\u003e\n\u003cli\u003eDeveloped and tested specifically for the RS 660 model years 2020 to 2026, ensuring reliable compatibility\u003c\/li\u003e\n\u003cli\u003ePremium-grade components selected for long-term durability under race-day conditions\u003c\/li\u003e\n\u003cli\u003eCompact and discreet — sits neatly in the original loom without adding clutter\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eClean Installation, Race-Ready Result\u003c\/h2\u003e\u003cp\u003eThe JP ES KIT 02 arrives with OEM-spec connectors that mate directly to the RS 660 wiring loom. There is no need to modify the harness or void your ability to return the bike to road specification. The eliminator mimics the correct electrical load that the ECU expects, silencing the fault indicator on the dashboard instantly. Whether you are preparing for a track day or building a dedicated race machine, this kit removes one more variable from your pre-session checklist.\u003c\/p\u003e\u003ch2\u003ePurpose-Built for the Aprilia RS 660\u003c\/h2\u003e\u003cp\u003eJetPrime engineered and bench-tested this eliminator set exclusively around the RS 660 platform. The result is a direct, confident fit rather than a generic resistor solution that may not address every fault code the Aprilia ECU generates. High-quality internal components ensure the kit handles the thermal and electrical demands of sustained track use without degradation.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis eliminator set is designed exclusively for the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eAprilia RS 660 — model years 2020, 2021, 2022, 2023, 2024, 2025, 2026\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eJetPrime\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eJP ES KIT 02\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eFront \u0026amp; rear light eliminator set\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eAprilia RS 660 (2020-2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnection\u003c\/td\u003e\n\u003ctd\u003eOEM plug-and-play connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eNo wire cutting required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntended Use\u003c\/td\u003e\n\u003ctd\u003eRace\/track use only — not road legal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003eAttention: This product is intended exclusively for motorsport and track use. It is not approved for use on public roads.\u003c\/p\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168760815882,"sku":"JP ES KIT02","price":128.38,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ES_KIT_02.png?v=1780813931"},{"product_id":"jetprime-jp-es-kit10","title":"JetPrime EVAP Canister Eliminator Kit for Aprilia RS 660 (2020-2026) – JP ES KIT10","description":"\u003cp\u003eThe JetPrime EVAP canister eliminator kit JP ES KIT10 is the cleanest, most practical solution for removing the emissions system from your Aprilia RS 660. Designed and validated specifically for the 2020-2026 RS 660, it suppresses the associated Fi fault codes at the source — no warning lights, no repeated dealer visits, no wiring headaches.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCompletely eliminates the EVAP system, including the activated charcoal canister, purge valve and all associated hoses, freeing up space and reducing weight in the airbox area.\u003c\/li\u003e\n\u003cli\u003eSuppresses all Fi fault codes linked to the purge valve, keeping your dashboard clean after the EVAP system is removed.\u003c\/li\u003e\n\u003cli\u003eServes as a direct replacement for a failed or leaking purge valve, resolving persistent fault codes without sourcing expensive OEM parts.\u003c\/li\u003e\n\u003cli\u003ePlug-and-play installation using an OEM-matched connector — no wire cutting, no splicing, no specialist tools required.\u003c\/li\u003e\n\u003cli\u003eHeat-resistant rubber caps protect open ports against the harsh thermal environment of the RS 660 engine bay, ensuring long-term reliability.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality \u0026amp; Engineering\u003c\/h2\u003e\u003cp\u003eJetPrime developed the JP ES KIT10 exclusively for the Aprilia RS 660 platform, which means every connector, cap and routing instruction is matched to the factory harness and airbox layout. The OEM-spec connector slots directly into the purge valve socket, so the ECU sees a clean signal and stops generating EVAP-related error codes. Heat-resistant rubber caps seal the vacated hose ports, preventing dirt ingress and maintaining correct pressure balance elsewhere in the intake circuit.\u003c\/p\u003e\u003ch2\u003eEveryday Usability \u0026amp; Value\u003c\/h2\u003e\u003cp\u003eUnlike some track-day modifications that demand hours of labour or specialist wiring knowledge, the JP ES KIT10 can be fitted in a single session without cutting a single wire. Because it plugs directly into the existing harness, the process is fully reversible — a genuine advantage for riders who want the flexibility to return the bike to a standard state. The kit also removes a common source of fault codes that can trigger unnecessarily on lightly modified RS 660 street bikes, making it a cost-effective diagnostic fix as much as a performance upgrade.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis kit is developed and tested specifically for the following motorcycle:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eAprilia RS 660 — model years 2020, 2021, 2022, 2023, 2024, 2025, 2026\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003ePlease verify your model year before ordering. This product is intended for race use only and is not approved for use on public roads.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: JetPrime\u003c\/li\u003e\n\u003cli\u003ePart number: JP ES KIT10\u003c\/li\u003e\n\u003cli\u003eType: EVAP canister eliminator kit\u003c\/li\u003e\n\u003cli\u003eFitment: Aprilia RS 660 (2020-2026)\u003c\/li\u003e\n\u003cli\u003eConnection: OEM-matched plug-and-play connector\u003c\/li\u003e\n\u003cli\u003eInstallation: No wire cutting required\u003c\/li\u003e\n\u003cli\u003eIntended use: Race use only — not road legal\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168760848650,"sku":"JP ES KIT10","price":25.88,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ES_KIT10.png?v=1780813931"},{"product_id":"eliminator-rear-brake-light-jetprime-aprilia-rs-660","title":"JetPrime Rear Brake Light Eliminator for Aprilia RS 660 (2020-2026) – JP ES 009","description":"\u003cp\u003eWhen you strip the Aprilia RS 660 back to its racing essentials, the last thing you need is a dashboard error code nagging you around every lap. The JetPrime JP ES 009 is a precision-engineered rear brake light eliminator built specifically for the RS 660 (2020-2026), using OEM-matched connectors and high-grade components to bypass the rear brake light circuit and silence dashboard fault warnings without cutting a single wire.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBypasses the rear brake light circuit cleanly, eliminating the need for the original unit on track-prepared machines\u003c\/li\u003e\n\u003cli\u003eDeactivates dashboard error warnings triggered by brake light removal, keeping your instrument cluster clean and distraction-free\u003c\/li\u003e\n\u003cli\u003ePlug-and-play installation using an OEM-specification connector — no wire cutting, no splicing, no specialist tools required\u003c\/li\u003e\n\u003cli\u003eDeveloped and tested exclusively for the Aprilia RS 660 model years 2020 to 2026, ensuring a perfect electrical match\u003c\/li\u003e\n\u003cli\u003ePremium internal components selected for long service life under the heat and vibration demands of competitive riding\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Premium Materials\u003c\/h2\u003e\u003cp\u003eJetPrime has built its reputation on producing electronics that meet the exacting standards of track preparation, and the JP ES 009 is no exception. Every connector in this kit is manufactured to OEM tolerances, meaning the fit is precise and the electrical contact is secure from the moment you plug it in. The quality of the internal components is deliberately matched to the demands of motorsport use — resisting heat cycles, vibration and the general harshness of a machine being pushed at the limit. There is no compromise here: this is not a generic resistor wired into a generic connector. It is a purpose-built solution for one specific motorcycle.\u003c\/p\u003e\u003ch2\u003eInstallation and Performance\u003c\/h2\u003e\u003cp\u003eFitting the JP ES 009 takes minutes. The OEM-style plug connects directly into the existing wiring loom at the rear brake light location, with no modifications to your harness. Once connected, the eliminator presents the correct resistance to the ECU, preventing any fault code from appearing on the dashboard. The result is a clean, fully functional instrument display with no error lights, and a rear end freed from components that serve no purpose on a closed circuit. The plug-and-play design also means the process is fully reversible should you wish to return the bike to road configuration.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis eliminator is designed and validated for the following application:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eAprilia RS 660 — model years 2020, 2021, 2022, 2023, 2024, 2025, 2026\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eImportant Notice\u003c\/h2\u003e\u003cp\u003eThis product is intended exclusively for motorsport and closed-circuit racing use. It is not approved for use on public roads.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: JetPrime\u003c\/li\u003e\n\u003cli\u003ePart number: JP ES 009\u003c\/li\u003e\n\u003cli\u003eType: Rear brake light eliminator\u003c\/li\u003e\n\u003cli\u003eFitment: Aprilia RS 660 (2020-2026)\u003c\/li\u003e\n\u003cli\u003eConnection: OEM-specification plug-and-play connector\u003c\/li\u003e\n\u003cli\u003eInstallation: No wire cutting required\u003c\/li\u003e\n\u003cli\u003eIntended use: Motorsport \/ closed-circuit racing only\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168760881418,"sku":"JP ES 009","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ES_009.png?v=1780813932"},{"product_id":"eliminator-sls-jetprime-aprilia-rs-660","title":"JetPrime SLS Solenoid Eliminator for Aprilia RS 660 (2020-2026) – JP ES 007","description":"\u003cp\u003eRunning a stripped-down RS 660 on track means the secondary air system is dead weight — and the dashboard knows it. The JetPrime JP ES 007 SLS solenoid eliminator lets you bypass the PAIR circuit solenoid valve cleanly and permanently silence the fault codes that follow, keeping your instrument cluster clean and your focus on the riding.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBypasses the SLS PAIR circuit solenoid valve, eliminating the root cause of secondary air system fault codes\u003c\/li\u003e\n\u003cli\u003eSuppresses dashboard error warnings triggered by SLS system removal or bypass\u003c\/li\u003e\n\u003cli\u003ePlug-and-play design — no wire cutting, no splicing, no irreversible modifications to the harness\u003c\/li\u003e\n\u003cli\u003eShips with an OEM-matched connector for a direct, secure connection\u003c\/li\u003e\n\u003cli\u003eDeveloped and tested specifically for the Aprilia RS 660 (2020-2026) to guarantee a precise fit first time\u003c\/li\u003e\n\u003cli\u003ePremium-grade components engineered for long-term reliability under race conditions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eClean Install, Lasting Reliability\u003c\/h2\u003e\u003cp\u003eThe JP ES 007 arrives ready to fit. The OEM-spec connector slots straight into the existing loom without adapters or modifications, which means the install is straightforward even in a race-day paddock environment. Because no wires are cut, the bike can be returned to standard specification whenever required. The quality of materials used ensures the unit holds up race after race without degradation in performance or connection integrity.\u003c\/p\u003e\u003ch2\u003eWhy Remove the SLS System?\u003c\/h2\u003e\u003cp\u003eThe secondary air system on the Aprilia RS 660 is designed to reduce exhaust emissions under road legislation. On a dedicated track machine — running a full exhaust system or a lightweight fairing kit — the solenoid valve is often removed as part of the preparation process. Without an eliminator in place, the ECU registers an open circuit at the solenoid and triggers a persistent fault code. The JetPrime eliminator presents the correct load to the ECU, neutralising the error and allowing the bike to run without interruption from warning lights.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eDesigned exclusively for the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eAprilia RS 660 — model years 2020, 2021, 2022, 2023, 2024, 2025, 2026\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: JetPrime\u003c\/li\u003e\n\u003cli\u003ePart number: JP ES 007\u003c\/li\u003e\n\u003cli\u003eType: SLS solenoid eliminator\u003c\/li\u003e\n\u003cli\u003eFunction: Bypasses SLS PAIR circuit solenoid valve and suppresses dashboard fault codes\u003c\/li\u003e\n\u003cli\u003eConnection: OEM-matched plug-and-play connector\u003c\/li\u003e\n\u003cli\u003eInstallation: No wire cutting required\u003c\/li\u003e\n\u003cli\u003eIntended use: Race\/track use only — not approved for road use\u003c\/li\u003e\n\u003cli\u003eFitment: Aprilia RS 660 (2020-2026)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCaution: This product is intended exclusively for motorsport and track use. It is not approved for use on public roads.\u003c\/p\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168760946954,"sku":"JP ES 007","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ES_007.png?v=1780813937"},{"product_id":"jetprime-jp-es-004","title":"JetPrime Tail Light Eliminator for Aprilia RS 660 (2020-2026) – JP ES 004","description":"\u003cp\u003eDesigned and built exclusively for the Aprilia RS 660, the JetPrime JP ES 004 tail light eliminator kit suppresses dashboard fault codes the moment an aftermarket tail tidy or race seat unit removes the OEM rear light cluster — no guesswork, no dashboard warnings, no cutting of original wiring harnesses.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCancels dashboard fault codes generated by removal of the stock tail light assembly on the Aprilia RS 660 (2020–2026)\u003c\/li\u003e\n\u003cli\u003eGenuine OEM-specification connector supplied — plugs directly into the factory harness with a precise, rattle-free fit\u003c\/li\u003e\n\u003cli\u003eTrue plug-and-play installation: no wire cutting, no soldering, no ECU intervention required\u003c\/li\u003e\n\u003cli\u003eEngineered and validated specifically for the RS 660 platform — not a generic resistor kit adapted from another model\u003c\/li\u003e\n\u003cli\u003ePremium-grade components selected for long-term reliability under race and track-day conditions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Materials\u003c\/h2\u003e\u003cp\u003eJetPrime built their reputation on producing electronics that match or exceed OEM construction standards, and the JP ES 004 is no exception. The connector housing is manufactured to OEM tolerances so it engages the factory loom with the same positive click and sealing integrity as the original plug. Internal components are rated for the vibration and thermal cycling typical of a high-revving inline twin on track, meaning the eliminator will not degrade or introduce intermittent faults over time. This is not a cheap resistor wrapped in heat-shrink — it is a properly engineered signal-correction module built to last the life of the bike.\u003c\/p\u003e\u003ch2\u003eInstallation and Use\u003c\/h2\u003e\u003cp\u003eFitting the JP ES 004 takes minutes. Disconnect the OEM tail light loom plug, connect the JetPrime eliminator in its place using the supplied OEM-matched connector, and secure the unit in the tail section. The dashboard will read a correctly terminated circuit and suppress the fault lamp immediately. No dealer diagnostic tool or software update is needed after installation. The kit is optimised for race and track-day use where a lightweight aftermarket seat unit or tail tidy replaces the full factory rear assembly.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis eliminator is designed and tested for the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eAprilia RS 660 — all variants, model years 2020 to 2026\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eIt is not intended for fitment to other Aprilia models or any other manufacturer's motorcycles without independent verification of connector and circuit compatibility.\u003c\/p\u003e\u003ch2\u003eSafety Notice\u003c\/h2\u003e\u003cp\u003eThe JetPrime JP ES 004 tail light eliminator is intended exclusively for competition and track use. It is not approved for road use and must not be fitted to any motorcycle operated on public roads.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: JetPrime\u003c\/li\u003e\n\u003cli\u003ePart number: JP ES 004\u003c\/li\u003e\n\u003cli\u003eType: Tail light eliminator \/ dashboard fault code suppressor\u003c\/li\u003e\n\u003cli\u003eConnection type: OEM-specification plug-and-play connector\u003c\/li\u003e\n\u003cli\u003eInstallation: No wire cutting required\u003c\/li\u003e\n\u003cli\u003eFitment: Aprilia RS 660 (2020–2026)\u003c\/li\u003e\n\u003cli\u003eIntended use: Race and track use only — not road legal\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168761078026,"sku":"JP ES 004","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ES_004.png?v=1780813945"},{"product_id":"eliminator-jetprime-aprilia-rs-660-jp-es-006","title":"JetPrime Headlight Eliminator for Aprilia RS 660 (2020-2026) – JP ES 006","description":"\u003cp\u003eRunning the Aprilia RS 660 without its front headlight — whether for track days, race preparation or a lightweight build — normally triggers a persistent dashboard fault warning. The JetPrime JP ES 006 headlight eliminator resolves that instantly with a clean plug-and-play connection that requires no cutting, splicing or guesswork, letting you focus entirely on the ride.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEliminates dashboard fault warnings caused by a disconnected or removed front headlight\u003c\/li\u003e\n\u003cli\u003ePlug-and-play installation using a direct OEM-matched connector — no wire cutting required\u003c\/li\u003e\n\u003cli\u003eDesigned and tested specifically for the Aprilia RS 660 (2020-2026) for a guaranteed fit\u003c\/li\u003e\n\u003cli\u003eHigh-quality components ensure lasting reliability under race and track conditions\u003c\/li\u003e\n\u003cli\u003eCompact, discreet unit that integrates neatly into the existing loom\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEffortless Installation, Clean Results\u003c\/h2\u003e\u003cp\u003eThe JP ES 006 arrives ready to install straight out of the packaging. The OEM-spec connector mates directly with the RS 660's headlight harness plug, so the entire job takes minutes and leaves no permanent modifications to the motorcycle's wiring. Once fitted, the instrument cluster reads the circuit as complete and all fault indicators clear immediately.\u003c\/p\u003e\u003ch2\u003eBuilt to Race Standards\u003c\/h2\u003e\u003cp\u003eJetPrime manufactures each eliminator to the same exacting standards applied across their full range of race electronics. Premium internal components handle the electrical load reliably session after session, making the JP ES 006 a sensible long-term investment for any RS 660 used on circuit.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis eliminator is designed exclusively for the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eAprilia RS 660 — model years 2020, 2021, 2022, 2023, 2024, 2025, 2026\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eImportant Notice\u003c\/h2\u003e\u003cp\u003eThis product is intended for race and track use only. It is not approved for use on public roads.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: JetPrime\u003c\/li\u003e\n\u003cli\u003ePart number: JP ES 006\u003c\/li\u003e\n\u003cli\u003eType: Front headlight eliminator\u003c\/li\u003e\n\u003cli\u003eFitment: Aprilia RS 660 (2020-2026)\u003c\/li\u003e\n\u003cli\u003eConnection: OEM plug-and-play connector\u003c\/li\u003e\n\u003cli\u003eInstallation: No wire cutting required\u003c\/li\u003e\n\u003cli\u003eIntended use: Race and track use only\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168761110794,"sku":"JP ES 006","price":113.88,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ES_006.png?v=1780813949"},{"product_id":"eliminator-side-stand-jetprime-aprilia-rs-660","title":"JetPrime Side Stand Eliminator for Aprilia RS 660 (2020-2026) – JP ES 001","description":"\u003cp\u003eBypass your side stand switch and silence those frustrating dashboard fault codes in one clean, no-cut installation. The JetPrime JP ES 001 side stand eliminator is engineered specifically for the Aprilia RS 660 across model years 2020 to 2026, giving track-day riders a plug-and-play solution that removes a common source of electrical gremlins without compromising the rest of the bike's wiring.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCompletely bypasses the side stand switch, eliminating switch-related interruptions to the ignition circuit\u003c\/li\u003e\n\u003cli\u003eSuppresses dashboard fault codes triggered by side stand switch removal or failure — no warning lights, no error messages\u003c\/li\u003e\n\u003cli\u003eTrue plug-and-play fitment using an OEM-spec connector: no wire cutting, no splicing, no irreversible modifications\u003c\/li\u003e\n\u003cli\u003eDeveloped and tested exclusively for the Aprilia RS 660 (2020-2026) to guarantee a clean, reliable connection first time\u003c\/li\u003e\n\u003cli\u003ePremium-grade components throughout for long-term durability under demanding race conditions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eClean Installation, Zero Compromise\u003c\/h2\u003e\u003cp\u003eUnlike generic bypass solutions, the JP ES 001 uses a factory-matched OEM connector that locates exactly where the original side stand switch plugs in. The entire installation is reversible — unplug the eliminator and refit the original switch at any time. There is no need to access the wiring loom, use heat-shrink joints, or consult an auto-electrician. For club racers preparing a machine between sessions in the paddock, that simplicity matters.\u003c\/p\u003e\u003ch2\u003eWhy Eliminate the Side Stand Switch?\u003c\/h2\u003e\u003cp\u003eOn track, the Aprilia RS 660's side stand switch can be a source of nuisance fault codes, particularly after the side stand is removed for competition regulations or after prolonged vibration causes contact issues. The JetPrime eliminator resolves this cleanly, allowing the ECU to operate without logging switch-related faults that would otherwise flag on the dashboard and potentially mask genuine issues during a race weekend.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eDesigned and validated for the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eAprilia RS 660 — model years 2020, 2021, 2022, 2023, 2024, 2025, 2026\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003ePlease verify your model year before fitting. This product is intended for race use only and is not approved for road use.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eJetPrime\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eJP ES 001\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eSide stand switch eliminator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eAprilia RS 660 (2020-2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnection\u003c\/td\u003e\n\u003ctd\u003eOEM plug-and-play connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eNo wire cutting required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntended Use\u003c\/td\u003e\n\u003ctd\u003eRace \/ track use only — not approved for road use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168761241866,"sku":"JP ES 001","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ES_001.png?v=1780813953"},{"product_id":"eliminator-sls-jetprime-aprilia-rsv4","title":"JetPrime SLS PAIR Circuit Solenoid Eliminator for Aprilia RSV4 \/ RSV4 1100 Factory \/ R \/ RR \/ RF (2009-2026) – JP ES 007","description":"\u003cp\u003eDesigned and validated exclusively for competition use, the JetPrime JP ES 007 SLS solenoid eliminator gives Aprilia RSV4 and RSV4 1100 owners a clean, legally compliant solution for race-prepared machines. By bypassing the secondary air system (SLS-PAIR) solenoid valve and simultaneously suppressing the resulting dashboard fault codes, it eliminates a persistent source of ECU confusion without cutting a single wire.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBypasses the SLS-PAIR circuit solenoid valve cleanly and completely, removing the secondary air system from the engine management loop.\u003c\/li\u003e\n\u003cli\u003eSuppresses dashboard error codes triggered by SLS system removal, keeping the instrument cluster clean on track.\u003c\/li\u003e\n\u003cli\u003eTrue plug-and-play installation via OEM-spec connector — no wire cutting, no soldering, no irreversible modification.\u003c\/li\u003e\n\u003cli\u003eDeveloped and dyno-tested specifically for the Aprilia RSV4 and RSV4 1100 platform across the full 2009-2026 model range.\u003c\/li\u003e\n\u003cli\u003ePremium-grade components throughout ensure long service life under the thermal and electrical stresses of race use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eRace-Ready Engineering\u003c\/h2\u003e\u003cp\u003eThe JP ES 007 is not a generic resistor plug. JetPrime engineered this eliminator with an OEM-matched connector that seats exactly as the factory solenoid did, meaning the harness remains undisturbed and the bike can be returned to standard specification if required. The high-quality internals replicate the correct electrical load seen by the ECU, which is why the dashboard remains fault-free once the unit is fitted — a detail that generic alternatives frequently miss.\u003c\/p\u003e\u003ch2\u003eWhy Remove the SLS System?\u003c\/h2\u003e\u003cp\u003eThe secondary air (SLS) system injects filtered air into the exhaust ports to reduce cold-start emissions. On a track-prepared RSV4 running an aftermarket exhaust or race fuel map, the system becomes redundant and can introduce unwanted variables into exhaust gas behaviour and throttle response. Removing it neatly with the JP ES 007 tidies up the engine bay and allows the fuelling calibration to work without interference from secondary air pulses.\u003c\/p\u003e\u003ch2\u003eSafety \u0026amp; Compliance Notice\u003c\/h2\u003e\u003cp\u003eThis product is approved for race and closed-circuit competition use only. It is not approved for use on public roads and must not be fitted to any motorcycle intended for road registration or road use. Always verify that your intended application complies with the regulations of your racing series before fitting.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThe JP ES 007 is engineered to fit the following Aprilia models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAprilia RSV4 (2009-2026)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 R (2009-2026)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 RR (2009-2026)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 RF (2009-2026)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 1100 (2009-2026)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 1100 Factory (2009-2026)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: JetPrime\u003c\/li\u003e\n\u003cli\u003ePart number: JP ES 007\u003c\/li\u003e\n\u003cli\u003eType: SLS PAIR circuit solenoid eliminator\u003c\/li\u003e\n\u003cli\u003eConnector: OEM-specification plug-and-play connector\u003c\/li\u003e\n\u003cli\u003eInstallation: Plug-and-play, no wire cutting required\u003c\/li\u003e\n\u003cli\u003eIntended use: Race \/ closed-circuit competition only — not road legal\u003c\/li\u003e\n\u003cli\u003eFitment: Aprilia RSV4 \/ RSV4 1100 Factory \/ R \/ RR \/ RF (2009-2026)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168761307402,"sku":"JP ES 007","price":15.22,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ES_007_6ad70ea2-7f11-4912-9325-64475fc919e5.png?v=1780813957"},{"product_id":"jetprime-jp-es-006","title":"JetPrime Headlight Eliminator for Aprilia RSV4 \/ RR \/ 1100 Factory 2021-2026 – JP ES 006","description":"\u003cp\u003eStrip the clutter from your dashboard without cutting a single wire. The JetPrime JP ES 006 headlight eliminator is engineered specifically for the Aprilia RSV4, RSV4 RR, and RSV4 1100 Factory (2021–2026), suppressing the headlight fault warning at its source and delivering a clean, error-free instrument display that belongs on a race-prepared machine.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEliminates headlight-related dashboard fault warnings on compatible Aprilia RSV4 models instantly\u003c\/li\u003e\n\u003cli\u003eTrue plug-and-play fitment using an OEM-spec connector — no wire cutting, no soldering, no permanent modification\u003c\/li\u003e\n\u003cli\u003ePurpose-designed and tested exclusively for the Aprilia RSV4 \/ RSV4 RR \/ RSV4 1100 Factory (2021–2026)\u003c\/li\u003e\n\u003cli\u003eHigh-quality components selected for long-term durability and consistent reliability under race conditions\u003c\/li\u003e\n\u003cli\u003eCompact, discreet form factor that tucks away cleanly once installed\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign, Finish and Heritage\u003c\/h2\u003e\u003cp\u003eJetPrime has built its reputation on precision electronics developed for the demands of competitive motorcycling. The JP ES 006 reflects that heritage: rather than a generic resistor bodged into the loom, this is a purpose-built eliminator module supplied with an OEM-matching connector. The engineering focus is on a clean, reversible installation that respects the integrity of the Aprilia's wiring harness while delivering a professional result that would not look out of place on a full track-day or competition build.\u003c\/p\u003e\u003ch2\u003ePerformance on Track\u003c\/h2\u003e\u003cp\u003eWhen a headlight is removed for track use, the RSV4's ECU registers an open circuit and flags a fault on the dashboard. Left unaddressed, that warning occupies valuable real estate on the instrument cluster and can mask other alerts during a session. The JP ES 006 presents the correct load to the ECU, keeping the dashboard clear and allowing the rider to focus entirely on the data that matters. Installation is straightforward enough to complete in the paddock without specialist tools.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis eliminator is designed and validated for the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAprilia RSV4 (2021–2026)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 RR (2021–2026)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 1100 Factory (2021–2026)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAlways verify the model year and variant before fitting. If in doubt, contact Inter-Pace with your VIN for confirmation.\u003c\/p\u003e\u003ch2\u003eImportant Notice\u003c\/h2\u003e\u003cp\u003eThis product is approved for race and track use only. It is not road-legal and must not be used on public roads.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: JetPrime\u003c\/li\u003e\n\u003cli\u003ePart number: JP ES 006\u003c\/li\u003e\n\u003cli\u003eType: Headlight eliminator \/ fault suppressor\u003c\/li\u003e\n\u003cli\u003eInstallation: Plug-and-play, OEM connector supplied\u003c\/li\u003e\n\u003cli\u003eFitment: Aprilia RSV4, RSV4 RR, RSV4 1100 Factory (2021–2026)\u003c\/li\u003e\n\u003cli\u003eIntended use: Race and track use only — not road-legal\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168761340170,"sku":"JP ES 006","price":113.88,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ES_006_453aa349-4356-4463-8793-2374f2255113.png?v=1780813959"},{"product_id":"eliminator-rucklicht-jetprime-aprilia-rsv4-21","title":"JetPrime Tail Light Eliminator for Aprilia RSV4 \/ RR \/ 1100 Factory (2021-2026) – JP ES 004","description":"\u003cp\u003eRunning a tail tidy or a race plate holder on your Aprilia RSV4, RSV4 RR or RSV4 1100 Factory should never mean living with an irritating dashboard fault. The JetPrime JP ES 004 tail light eliminator is engineered specifically for 2021-2026 RSV4 variants, cancelling the instrument cluster error the moment you remove the stock tail light — so the cockpit stays clean and the ride stays focused.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEliminates dashboard fault codes triggered by tail light removal on RSV4 \/ RR \/ 1100 Factory (2021-2026)\u003c\/li\u003e\n\u003cli\u003ePlug-and-play fitment using OEM-matched connectors — no wire cutting, no soldering, no permanent modification\u003c\/li\u003e\n\u003cli\u003eDesigned and validated exclusively for the Aprilia RSV4 platform, ensuring a precise electrical match\u003c\/li\u003e\n\u003cli\u003eHigh-quality components selected for long-term reliability under race conditions\u003c\/li\u003e\n\u003cli\u003eReversible installation keeps the original wiring harness completely intact\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePlug-and-Play Simplicity\u003c\/h2\u003e\u003cp\u003eThe JP ES 004 arrives with an OEM-spec connector that slots directly into the factory loom. There is no need to cut, splice or tape a single wire. The eliminator sits discreetly behind the tail unit, and the instrument cluster behaves exactly as it did with the original lamp fitted — minus the fault warning. Installation takes minutes, and the bike can be returned to stock just as quickly if required.\u003c\/p\u003e\u003ch2\u003eRace-Grade Build Quality\u003c\/h2\u003e\u003cp\u003eJetPrime developed the JP ES 004 alongside their tail tidy and licence plate holder range, meaning the electrical load simulation is matched precisely to what the RSV4's ECU expects. Premium-grade components ensure the unit holds up to the vibration, heat and humidity typical of track use, session after session.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThe JP ES 004 fits the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAprilia RSV4 (2021-2026)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 RR (2021-2026)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 1100 Factory (2021-2026)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNote: This product is intended exclusively for racing and track use. It is not approved for road use.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: JetPrime\u003c\/li\u003e\n\u003cli\u003ePart number: JP ES 004\u003c\/li\u003e\n\u003cli\u003eType: Tail light eliminator\u003c\/li\u003e\n\u003cli\u003eInstallation: Plug-and-play, OEM connector\u003c\/li\u003e\n\u003cli\u003eFitment: Aprilia RSV4 \/ RSV4 RR \/ RSV4 1100 Factory (2021-2026)\u003c\/li\u003e\n\u003cli\u003eIntended use: Track \/ race use only — not road legal\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168761471242,"sku":"JP ES 004","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ES_004_31860d15-cffb-4e53-8f76-67b0c5000294.png?v=1780813965"},{"product_id":"jetprime-jpes002","title":"JetPrime Canister Eliminator System for Aprilia RSV4\/RR\/1100 Factory (2021-2026) – JP ES 002","description":"\u003cp\u003eDesigned exclusively for track and competition use, the JetPrime Canister Eliminator Kit JP ES 002 gives Aprilia RSV4, RSV4 RR and RSV4 1100 Factory riders (2021–2026) a clean, code-free solution for removing the entire EVAP system. Engineered and validated specifically for these models, it eliminates the activated charcoal canister, the electronic purge valve and all associated EVAP hoses without cutting a single wire.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFully suppresses the fuel-injection fault codes associated with the EVAP purge valve, keeping the ECU clean after removal\u003c\/li\u003e\n\u003cli\u003eServes as a direct replacement for a failed or degraded purge valve, ending nuisance fault codes at source\u003c\/li\u003e\n\u003cli\u003eEnables complete removal of the EVAP canister, activated charcoal filter and all related hoses for a tidier engine bay\u003c\/li\u003e\n\u003cli\u003eTrue plug-and-play installation using an OEM-spec connector — no wire cutting, no splicing, no permanent modification to the loom\u003c\/li\u003e\n\u003cli\u003eHeat-resistant rubber caps protect open hose ends against the demanding thermal environment of a race-prepared V4\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality \u0026amp; Engineering\u003c\/h2\u003e\u003cp\u003eJetPrime developed the JP ES 002 through dedicated testing on the Aprilia RSV4 platform rather than adapting a generic unit. The electronic purge-valve eliminator ships with an OEM-matched connector that clips directly into the factory harness, ensuring a secure, rattle-free connection. Heat-resistant rubber caps seal the vacated hose ports against moisture, debris and the considerable heat generated by a tuned V4 in track trim. Every component in the kit is selected to guarantee long-term durability under race conditions — not just for a single event, but across a full season of use.\u003c\/p\u003e\u003ch2\u003eInstallation \u0026amp; Practical Use\u003c\/h2\u003e\u003cp\u003eBecause the JP ES 002 is a genuine plug-and-play unit, installation requires no specialist wiring knowledge. Unplug the factory purge-valve connector, plug in the JetPrime eliminator, cap the open hose ports and remove the canister assembly. The ECU recognises the replacement signal, fault codes remain dormant and the bike is ready to run. The result is a cleaner subframe area, marginal weight reduction from the removed canister assembly and an engine management system free of spurious EVAP-related warnings during track sessions.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThe JetPrime JP ES 002 is developed and tested for the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAprilia RSV4 — 2021, 2022, 2023, 2024, 2025, 2026\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 RR — 2021, 2022, 2023, 2024, 2025, 2026\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 1100 Factory — 2021, 2022, 2023, 2024, 2025, 2026\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNote: This kit is approved for race and competition use only. It is not road-legal and must not be used on public roads.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: JetPrime\u003c\/li\u003e\n\u003cli\u003ePart number: JP ES 002\u003c\/li\u003e\n\u003cli\u003eType: EVAP canister eliminator kit\u003c\/li\u003e\n\u003cli\u003eConnector type: OEM-specification direct-fit connector\u003c\/li\u003e\n\u003cli\u003eInstallation: Plug-and-play, no wire cutting required\u003c\/li\u003e\n\u003cli\u003eFitment: Aprilia RSV4 \/ RSV4 RR \/ RSV4 1100 Factory (2021–2026)\u003c\/li\u003e\n\u003cli\u003eIntended use: Race and competition only — not road-legal\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168761536778,"sku":"JP ES 002","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ES_002.png?v=1780813969"},{"product_id":"jetprime-jp-es-001","title":"JetPrime Sidestand Switch Eliminator – Aprilia RSV4 \/ RR \/ 1100 Factory (2021–2026) JP ES 001","description":"\u003cp\u003eDesigned from the ground up for track and racing use, the JetPrime JP ES 001 sidestand switch eliminator lets your Aprilia RSV4, RSV4 RR or RSV4 1100 Factory run free of spurious dashboard fault codes — a clean, plug-and-play solution that removes one of the most frustrating obstacles between the pit lane and the circuit.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBypasses the sidestand switch completely, eliminating the source of unwanted fault codes at their root\u003c\/li\u003e\n\u003cli\u003eSuppresses dashboard error warnings triggered by sidestand switch removal or modification — keeping your dash clean during race sessions\u003c\/li\u003e\n\u003cli\u003ePlug-and-play installation via OEM-matched connector — no wire cutting, no splicing, no permanent modification\u003c\/li\u003e\n\u003cli\u003eEngineered and tested specifically for the Aprilia RSV4, RSV4 RR and RSV4 1100 Factory (2021–2026)\u003c\/li\u003e\n\u003cli\u003ePremium-grade components selected for long-term reliability under race conditions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTrack-Focused Engineering\u003c\/h2\u003e\u003cp\u003eWhen you strip a race-prepared RSV4 of its sidestand, the factory ECU raises a fault code and floods the dashboard with warnings that can mask genuine alerts during a session. The JetPrime JP ES 001 addresses this at the electrical level rather than with a workaround tape-and-resistor fix. The unit presents the correct signal to the ECU, convincing the system that a healthy sidestand switch is in place and keeping the instrument cluster free of distractions when you need your focus on the track.\u003c\/p\u003e\u003ch2\u003eInstallation \u0026amp; Build Quality\u003c\/h2\u003e\u003cp\u003eThe eliminator arrives with a factory-spec OEM connector that clicks directly into the bike's existing loom. No wires need to be cut and no permanent changes are made to the harness, so returning the motorcycle to standard specification is straightforward. High-quality internal components ensure the unit holds up across demanding race weekends, repeated thermal cycles and the vibration loads that competition machines generate.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis eliminator is developed and validated specifically for the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAprilia RSV4 (2021–2026)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 RR (2021–2026)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 1100 Factory (2021–2026)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eImportant Safety Notice\u003c\/h2\u003e\u003cp\u003eThis product is approved for racing and track use only. It is not road-legal and must not be used on public roads.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: JetPrime\u003c\/li\u003e\n\u003cli\u003ePart number: JP ES 001\u003c\/li\u003e\n\u003cli\u003eFunction: Sidestand switch eliminator with dashboard fault code suppression\u003c\/li\u003e\n\u003cli\u003eConnection type: OEM plug-and-play connector, no wire cutting required\u003c\/li\u003e\n\u003cli\u003eFitment: Aprilia RSV4, RSV4 RR, RSV4 1100 Factory (2021–2026)\u003c\/li\u003e\n\u003cli\u003eIntended use: Racing and track use only — not road-legal\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168761602314,"sku":"JP ES 001","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ES_001_382530b3-112e-4f24-b91c-59efd88ee696.png?v=1780813971"},{"product_id":"eliminator-seitenstanderschalter-jetprime-ducati-panigale-899","title":"JetPrime Side Stand Switch Eliminator for Ducati Panigale 899 (2013-2016) – JP ES 011","description":"\u003cp\u003eEngineered specifically for the Ducati Panigale 899, the JetPrime JP ES 011 side stand switch eliminator is built to an uncompromising standard — using OEM-grade connectors and high-quality components that are designed to last the distance. It bypasses the side stand switch completely while simultaneously suppressing the dashboard fault codes that would otherwise plague a track-prepared machine.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBypasses the side stand switch entirely, removing a common source of unexpected engine cut-out on track\u003c\/li\u003e\n\u003cli\u003eSuppresses dashboard fault codes triggered by side stand switch removal or bypass — keeping your dash clean and readable\u003c\/li\u003e\n\u003cli\u003ePlug-and-play installation using an OEM-matched connector — no cutting, splicing or soldering of wiring harness required\u003c\/li\u003e\n\u003cli\u003eHigh-quality components selected for long-term durability and consistent reliability under racing conditions\u003c\/li\u003e\n\u003cli\u003eDeveloped and tested exclusively for the Ducati Panigale 899 (2013-2016) to ensure a precise, confident fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Premium Materials\u003c\/h2\u003e\u003cp\u003eWhere lesser eliminators rely on generic connectors and loose tolerances, the JP ES 011 uses an OEM-specification connector that locks directly into the Panigale 899's existing wiring loom with no modification. The internal components are chosen for robustness rather than cost-cutting — a detail that matters when your electronics need to perform reliably lap after lap. JetPrime's attention to material quality means there is no corrosion risk at the connection point and no signal degradation over time. The result is a unit that feels as considered as the factory part it replaces.\u003c\/p\u003e\u003ch2\u003eTrack Use and Practical Benefit\u003c\/h2\u003e\u003cp\u003eWhen preparing a Ducati Panigale 899 for circuit use, removing or bypassing the side stand switch is a standard step — but without the correct eliminator, the ECU logs fault codes and the dashboard displays warnings that distract from race focus. The JP ES 011 resolves both issues in a single, clean installation. Because no wire cutting is involved, the modification is fully reversible, making it straightforward to return the motorcycle to a road-legal configuration if required. Note that this product is intended exclusively for motorsport and track use and is not approved for use on public roads.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eDucati Panigale 899 – 2013, 2014, 2015, 2016\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: JetPrime\u003c\/li\u003e\n\u003cli\u003ePart number: JP ES 011\u003c\/li\u003e\n\u003cli\u003eType: Side stand switch eliminator\u003c\/li\u003e\n\u003cli\u003eConnector: OEM-specification plug-and-play connector\u003c\/li\u003e\n\u003cli\u003eInstallation: No wire cutting required\u003c\/li\u003e\n\u003cli\u003eFitment: Ducati Panigale 899 (2013-2016)\u003c\/li\u003e\n\u003cli\u003eIntended use: Track and motorsport only — not road legal\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168762159370,"sku":"JP ES 011","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ES_011.png?v=1780813991"},{"product_id":"eliminator-magnetspule-sls-jetprime-ducati-panigale-959","title":"JetPrime SLS Solenoid Eliminator for Ducati Panigale 959 (2016-2019) – JP ES 007","description":"\u003cp\u003eChasing clean dashboard readings and consistent engine behaviour on your Ducati Panigale 959? The JetPrime Eliminator JP ES 007 bypasses the SLS-PAIR solenoid valve and simultaneously suppresses the fault codes that appear on your dashboard whenever the secondary air system is removed or disabled — delivering a cleaner, more reliable setup without cutting a single wire.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBypasses the SLS-PAIR solenoid valve completely, eliminating the root cause of secondary-air-related fault codes\u003c\/li\u003e\n\u003cli\u003eSuppresses dashboard error lights that appear after removing or disabling the SLS system — no more warning lamp distractions on track\u003c\/li\u003e\n\u003cli\u003ePlug-and-play installation using OEM-spec connectors — no wire cutting, no splicing, no permanent modifications\u003c\/li\u003e\n\u003cli\u003eDeveloped and validated specifically for the Ducati Panigale 959 (2016-2019), ensuring a direct, confident fit\u003c\/li\u003e\n\u003cli\u003ePremium-grade components selected for long service life under the thermal and vibration demands of race use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eRace-Ready Engineering\u003c\/h2\u003e\u003cp\u003eThe JP ES 007 is engineered around a precision solenoid eliminator circuit that mimics the load signature of the original SLS solenoid. This means the ECU sees exactly what it expects, suppressing fault codes at source rather than simply masking them. The result is a stable, error-free dashboard and an engine management system that operates as intended — even after the secondary air system has been removed as part of a full track-preparation programme.\u003c\/p\u003e\u003cp\u003eInstallation takes minutes. The unit arrives pre-assembled with a factory-style OEM connector that mates directly with the Panigale 959 wiring harness. No crimping tools, no soldering iron, no risk of damaged wires — simply unplug the original solenoid and plug in the JP ES 007 in its place.\u003c\/p\u003e\u003ch2\u003eQuality and Durability\u003c\/h2\u003e\u003cp\u003eJetPrime selects components for the JP ES 007 that are rated to withstand the elevated temperatures found in the engine bay of a Panigale 959 under sustained track use. The assembly is compact and neatly packaged so it can be routed and secured without interference with surrounding components. Every unit is tested before dispatch to ensure correct electrical behaviour.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis eliminator is designed exclusively for the following motorcycle:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDucati Panigale 959 — model years 2016, 2017, 2018, 2019\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003ePlease verify your model year before ordering. This product is not compatible with other Ducati models without confirmation from JetPrime.\u003c\/p\u003e\u003ch2\u003eImportant Safety Notice\u003c\/h2\u003e\u003cp\u003eThe JetPrime JP ES 007 is intended exclusively for closed-circuit racing use. It is not approved for use on public roads and must not be fitted to any motorcycle operated in road traffic.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: JetPrime\u003c\/li\u003e\n\u003cli\u003ePart number: JP ES 007\u003c\/li\u003e\n\u003cli\u003eType: SLS solenoid eliminator\u003c\/li\u003e\n\u003cli\u003eFunction: Bypasses SLS-PAIR solenoid valve and suppresses dashboard fault codes\u003c\/li\u003e\n\u003cli\u003eConnector: OEM-type plug-and-play connector\u003c\/li\u003e\n\u003cli\u003eInstallation: No wire cutting required\u003c\/li\u003e\n\u003cli\u003eFitment: Ducati Panigale 959 (2016-2019)\u003c\/li\u003e\n\u003cli\u003eIntended use: Closed-circuit racing only — not road legal\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168762519818,"sku":"JP ES 007","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ES_007_7b2971f9-d8b8-4e68-8b3f-8cffc2c43ee8.png?v=1780814005"},{"product_id":"eliminator-seitenstanderschalter-jetprime-ducati-panigale-959","title":"JetPrime Side Stand Eliminator for Ducati Panigale 959 (2016-2019) – JP ES 011","description":"\u003cp\u003eDesigned exclusively for track and racing use, the JetPrime JP ES 011 side stand eliminator lets you remove the side stand switch from your Ducati Panigale 959 without triggering dashboard fault codes — giving you a clean, distraction-free cockpit when every second on circuit counts.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBypasses the side stand switch entirely, eliminating the risk of an accidental cut-out on track\u003c\/li\u003e\n\u003cli\u003eSuppresses dashboard fault codes that would otherwise appear after switch removal — no warning lights, no interruptions\u003c\/li\u003e\n\u003cli\u003ePlug-and-play fitment using an OEM-matched connector: no wire cutting, no splicing, no permanent modification\u003c\/li\u003e\n\u003cli\u003eDeveloped and tested specifically for the Ducati Panigale 959 (2016-2019) — guaranteed compatibility\u003c\/li\u003e\n\u003cli\u003eHigh-quality components chosen for long-term reliability under race conditions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTrack-Ready Engineering\u003c\/h2\u003e\u003cp\u003eWhen you are preparing a Ducati Panigale 959 for circuit work, the side stand switch is one of the first items that needs addressing. Left in place, it can cause unexpected engine cut-outs and trigger fault codes the moment the stand is removed or the wiring is disturbed. The JetPrime JP ES 011 resolves this cleanly: the OEM-style connector slots straight into the factory harness, the eliminator module tells the ECU everything is normal, and you are free to focus on lap times rather than dashboard warnings.\u003c\/p\u003e\u003cp\u003eThe unit requires no irreversible changes to the wiring loom. Should you ever need to return the bike to road specification, the process is equally straightforward — unplug the JetPrime module and reconnect the original switch.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis eliminator is designed and validated for the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDucati Panigale 959 — model years 2016, 2017, 2018, 2019\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: JetPrime\u003c\/li\u003e\n\u003cli\u003ePart number: JP ES 011\u003c\/li\u003e\n\u003cli\u003eFunction: Side stand switch eliminator with dashboard fault code suppression\u003c\/li\u003e\n\u003cli\u003eConnector type: OEM-matched plug-and-play connector\u003c\/li\u003e\n\u003cli\u003eInstallation: No wire cutting required\u003c\/li\u003e\n\u003cli\u003eFitment: Ducati Panigale 959 (2016-2019)\u003c\/li\u003e\n\u003cli\u003eIntended use: Racing and track use only — not approved for road use\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNotice: This product is intended exclusively for racing and track use. It is not approved for use on public roads.\u003c\/p\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168762552586,"sku":"JP ES 011","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ES_011_841b6c8d-51c8-45d6-8f44-06e9a8fd77be.png?v=1780814006"},{"product_id":"eliminator-jp-es-002-jetprime-ducati-panigale-959","title":"JetPrime EVAP Eliminator Canister System for Ducati Panigale 959 (2016-2019) – JP ES 002","description":"\u003cp\u003eThe JetPrime JP ES 002 canister eliminator system is engineered with the precision and pedigree you would expect from a brand that has spent years developing electronics solutions for Italian superbikes. Designed exclusively for the Ducati Panigale 959 (2016-2019), this kit strips away the EVAP system cleanly and intelligently, suppressing the associated Fi fault codes so your dash stays clean and your engine runs exactly as it should on track.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRemoves the EVAP canister, electronic purge valve and all associated hoses in a single complete kit\u003c\/li\u003e\n\u003cli\u003eSuppresses the Fi fault codes linked to the purge valve — no warning lights, no diagnostic headaches\u003c\/li\u003e\n\u003cli\u003eDirect OEM-connector fitment throughout — no wire cutting, no splicing, genuinely plug-and-play\u003c\/li\u003e\n\u003cli\u003eHeat-resistant rubber caps seal open hose ends for long-term durability under race conditions\u003c\/li\u003e\n\u003cli\u003eDoubles as a replacement for a failed or leaking purge valve, restoring correct fuelling behaviour\u003c\/li\u003e\n\u003cli\u003eDeveloped and tested specifically for the Panigale 959 (2016-2019) — not a generic solution\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign, Finish and Heritage\u003c\/h2\u003e\u003cp\u003eJetPrime has built a reputation across the Italian and European racing paddock for electronics that are over-engineered by design. The JP ES 002 reflects that philosophy: every connector is OEM-grade, every rubber cap is selected for heat resistance, and the kit arrives ready to install without modification. There are no generic adaptors, no cable ties holding things together — just a thoughtfully assembled package that fits as though the factory made it.\u003c\/p\u003e\u003cp\u003eThe attention to detail carries through to the suppression electronics. Rather than simply unplugging the purge valve and hoping the ECU ignores the open circuit, the JP ES 002 feeds the correct signal back to the ECU so the fault code never appears. It is this kind of considered engineering — rooted in real race preparation experience — that separates JetPrime from catalogue alternatives.\u003c\/p\u003e\u003ch2\u003ePerformance and Track Readiness\u003c\/h2\u003e\u003cp\u003eThe factory EVAP canister and purge valve system adds weight, routing complexity and a potential source of fuelling inconsistency under hard acceleration. Removing it with the JP ES 002 simplifies the under-seat area, reduces the number of serviceable components and eliminates a known failure point on track-prepared 959s. The result is a cleaner engine bay, tidier hose routing and an ECU that no longer has to manage canister purge cycles during performance riding.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis kit is designed and validated for one specific application:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDucati Panigale 959 — model years 2016, 2017, 2018 and 2019\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003ePlease note: the JP ES 002 is intended for closed-circuit, competition use only. It is not approved for road use and should not be fitted to a road-registered motorcycle.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eJetPrime\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eJP ES 002\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eEVAP canister eliminator system\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment\u003c\/th\u003e\n\u003ctd\u003eDucati Panigale 959 (2016-2019)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConnection Type\u003c\/th\u003e\n\u003ctd\u003eOEM plug-and-play connectors — no wire cutting required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eHeat-resistant rubber caps; OEM-grade connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntended Use\u003c\/th\u003e\n\u003ctd\u003eClosed-circuit competition \/ track use only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168762618122,"sku":"JP ES 002","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ES_002_5ed3d60c-b851-47f0-9ec4-07fb2f025883.png?v=1780814011"},{"product_id":"eliminator-magnetspule-sls-jetprime-ducati-panigale-1199","title":"JetPrime SLS Solenoid Eliminator for Ducati Panigale 1199\/R\/S (2012-2017) – JP ES 007","description":"\u003cp\u003eRemoving the secondary air system from your Ducati Panigale 1199 should not mean living with a dashboard full of fault codes. The JetPrime SLS Solenoid Eliminator JP ES 007 bypasses the SLS-PAIR circuit solenoid valve cleanly and silences those error warnings at the same time — all without cutting a single wire. It is the straightforward, cost-effective fix that every 1199 owner who has deleted the SAS system actually needs.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBypasses the SLS-PAIR circuit solenoid valve, eliminating the root cause of secondary air system fault codes\u003c\/li\u003e\n\u003cli\u003eSuppresses dashboard error warnings triggered by SLS system removal — clean instrument display from day one\u003c\/li\u003e\n\u003cli\u003ePlug-and-play design using OEM-spec connectors; no wire cutting or splicing required\u003c\/li\u003e\n\u003cli\u003eStraightforward installation that can be completed without specialist tools or workshop time\u003c\/li\u003e\n\u003cli\u003eEngineered and tested specifically for the Ducati Panigale 1199, 1199 R and 1199 S (2012-2017)\u003c\/li\u003e\n\u003cli\u003eHigh-quality components selected for long-term reliability under race conditions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePractical Value and Everyday Usability\u003c\/h2\u003e\u003cp\u003eFor riders who have already removed or bypassed the secondary air system on their Panigale 1199, the persistent fault codes are an ongoing inconvenience — both on track days and during pre-ride checks. The JP ES 007 addresses this directly. The OEM-compatible connector drops straight into the factory loom, restoring a clean ECU communication signal without any permanent modification to the harness. The result is a tidy, reversible installation that takes minutes rather than hours.\u003c\/p\u003e\u003cp\u003eThe eliminator is built to the same standard as JetPrime's broader range of electronic accessories — components are selected for durability in the demanding thermal environment of a Ducati V-twin, and the unit is designed to remain reliable over the full lifespan of the bike.\u003c\/p\u003e\u003ch2\u003eTrack Application\u003c\/h2\u003e\u003cp\u003eThe JP ES 007 is developed with race and track use firmly in mind. Stripping the SLS-PAIR system is a common step in preparing a Panigale 1199 for circuit work, and this eliminator completes that process properly. Rather than improvised resistor fixes or taped-over connectors, the JetPrime unit provides a purpose-built, tested solution that keeps the ECU operating cleanly.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis eliminator is designed exclusively for the following motorcycles:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale 1199 (2012-2017)\u003c\/li\u003e\n\u003cli\u003eDucati Panigale 1199 R (2012-2017)\u003c\/li\u003e\n\u003cli\u003eDucati Panigale 1199 S (2012-2017)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note: this product is intended for race and track use only and is not approved for road use.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: JetPrime\u003c\/li\u003e\n\u003cli\u003ePart number: JP ES 007\u003c\/li\u003e\n\u003cli\u003eFunction: SLS-PAIR circuit solenoid valve bypass and fault code eliminator\u003c\/li\u003e\n\u003cli\u003eConnector type: OEM-compatible plug-and-play\u003c\/li\u003e\n\u003cli\u003eInstallation: No wire cutting required\u003c\/li\u003e\n\u003cli\u003eFitment: Ducati Panigale 1199 \/ 1199 R \/ 1199 S, 2012-2017\u003c\/li\u003e\n\u003cli\u003eIntended use: Race and track use only\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168763076874,"sku":"JP ES 007","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ES_007_42284125-50a6-459d-9c94-63eb606a689a.png?v=1780814028"},{"product_id":"eliminator-sidestand-jetprime-ducati-panigale-1199","title":"JetPrime Side Stand Switch Eliminator – Ducati Panigale 1199\/R\/S (2012-2017) JP ES 011","description":"\u003cp\u003eEngineered from the ground up for race use, the JetPrime JP ES 011 side stand switch eliminator for the Ducati Panigale 1199\/R\/S delivers a precision-matched, plug-and-play solution that bypasses the side stand switch and simultaneously suppresses the dashboard fault code — no cable cutting, no guesswork, no compromise on build integrity.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBypasses the side stand switch completely, allowing unrestricted operation on track without the switch circuit interfering with ignition or gearchange logic.\u003c\/li\u003e\n\u003cli\u003eEliminates the dashboard error that is triggered when the side stand switch is removed or disconnected, keeping the instrument display clean and fault-free.\u003c\/li\u003e\n\u003cli\u003eOEM-specification connector included for a direct, secure connection into the factory loom — no splicing, no soldering, no permanent modifications to the wiring harness.\u003c\/li\u003e\n\u003cli\u003ePremium-grade components selected for long service life and consistent reliability under race conditions.\u003c\/li\u003e\n\u003cli\u003eDesigned and validated specifically for the Ducati Panigale 1199, 1199 R and 1199 S across the full 2012–2017 production run.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Materials\u003c\/h2\u003e\u003cp\u003eWhere generic eliminators rely on loose wire tails and generic connectors, the JP ES 011 is built around an OEM-matched plug that mirrors Ducati's own connector geometry and pin layout. The result is a connection that sits flush in the factory socket with zero play, maintaining the electrical integrity of the original loom. Every component in the circuit is rated for the voltage and current demands of the Panigale's ECU environment, so there is no risk of voltage drop or intermittent faults corrupting sensor data. JetPrime's manufacturing process applies the same quality controls used on its performance electronics range — this is not a cost-reduced bypass resistor in heat-shrink; it is a purpose-built module with the tolerances to match.\u003c\/p\u003e\u003ch2\u003eInstallation and Race Use\u003c\/h2\u003e\u003cp\u003eInstallation is genuinely tool-free for the electrical side: locate the side stand switch connector, unplug it from the switch, and plug in the JP ES 011 in its place. The OEM connector ensures it clicks home first time with no adaptation required. Because no wires are cut or permanently altered, the modification is fully reversible should the bike need to return to road-legal specification. On track, eliminating the switch removes a common source of unexpected cut-outs during aggressive cornering where the switch plunger can bounce on rough surfaces. The simultaneous fault suppression means the dashboard remains clear so the rider can focus on the data that matters — lap times, fuel load, and traction control settings — rather than chasing ghost fault codes.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis eliminator is designed and tested exclusively for the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale 1199 (2012–2017)\u003c\/li\u003e\n\u003cli\u003eDucati Panigale 1199 R (2012–2017)\u003c\/li\u003e\n\u003cli\u003eDucati Panigale 1199 S (2012–2017)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAlways confirm the connector type on your specific bike before installation. Not compatible with the 1299, V4, or earlier 848\/1098 platforms.\u003c\/p\u003e\u003ch2\u003eImportant Notice\u003c\/h2\u003e\u003cp\u003eThe JetPrime JP ES 011 is intended exclusively for motorsport and closed-circuit race use. It is not approved for use on public roads. Fitting this product to a road-registered vehicle may render it non-compliant with road traffic legislation.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: JetPrime\u003c\/li\u003e\n\u003cli\u003ePart number: JP ES 011\u003c\/li\u003e\n\u003cli\u003eType: Side stand switch eliminator\u003c\/li\u003e\n\u003cli\u003eConnection: OEM-specification plug-and-play connector\u003c\/li\u003e\n\u003cli\u003eInstallation: No cable cutting required — fully reversible\u003c\/li\u003e\n\u003cli\u003eFitment: Ducati Panigale 1199 \/ 1199 R \/ 1199 S (2012–2017)\u003c\/li\u003e\n\u003cli\u003eIntended use: Motorsport \/ closed-circuit race use only\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168763207946,"sku":"JP ES 011","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ES_011_2a657b22-2a14-4ba1-ba92-86f5ccf5b287.png?v=1780814034"},{"product_id":"jetprime-ducati-panigale-1299-s-jp-es-002","title":"JetPrime Canister Eliminator System for Ducati Panigale 1299\/S (2015-2018) – JP ES 002","description":"\u003cp\u003eStripping the Ducati Panigale 1299\/S of its bulky EVAP system is a clean, effective step toward a race-ready specification — and the JetPrime JP ES 002 makes it completely straightforward. Designed and validated specifically for 2015–2018 Panigale 1299 and 1299 S models, this canister eliminator kit removes the activated carbon filter canister, the electronic purge valve, and all associated EVAP hoses in one tidy, plug-and-play procedure, with no wiring cuts required.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEliminates the EVAP system (activated carbon canister) and all related hoses for a cleaner engine bay\u003c\/li\u003e\n\u003cli\u003eDisables the fuel-injection fault codes associated with the purge valve — no warning lights after removal\u003c\/li\u003e\n\u003cli\u003eProvides a direct replacement for a failed or deteriorating purge valve\u003c\/li\u003e\n\u003cli\u003ePlug-and-play fitment using an OEM-spec connector — no cutting or splicing of wiring looms\u003c\/li\u003e\n\u003cli\u003eHeat-resistant rubber caps throughout for lasting durability under race conditions\u003c\/li\u003e\n\u003cli\u003eEngineered and track-tested exclusively for the Ducati Panigale 1299\/S (2015–2018)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality \u0026amp; Engineering\u003c\/h2\u003e\u003cp\u003eEvery component in the JP ES 002 kit is selected to withstand the thermal and mechanical demands of track use. The electronic purge-valve eliminator module ships with a factory-compatible OEM connector, ensuring a seamless drop-in interface with the Panigale's wiring harness. Heat-resistant rubber end caps seal the vacated hose ports cleanly and reliably, preventing contamination and maintaining correct engine bay pressures. JetPrime's component selection reflects the same engineering discipline that makes their products a staple in race paddocks across Europe.\u003c\/p\u003e\u003ch2\u003ePerformance \u0026amp; Race Preparation\u003c\/h2\u003e\u003cp\u003eThe EVAP canister and its associated plumbing are calibrated for road-legal emissions compliance, not outright performance. Removing this system through the JP ES 002 kit tidies the airbox area, eliminates a potential source of fuel vapour-related fuelling inconsistency, and removes a component that sees no benefit on a closed circuit. Combined with the fault-code suppression built into the eliminator module, the result is a cleaner, more focused machine ready for track day or race weekend use.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis kit fits the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale 1299 (2015–2018)\u003c\/li\u003e\n\u003cli\u003eDucati Panigale 1299 S (2015–2018)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eImportant Notice\u003c\/h2\u003e\u003cp\u003eThe JetPrime JP ES 002 Canister Eliminator System is intended exclusively for motorsport and closed-circuit track use. It is not approved for use on public roads and must not be fitted to any vehicle operated on public highways.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: JetPrime\u003c\/li\u003e\n\u003cli\u003ePart number: JP ES 002\u003c\/li\u003e\n\u003cli\u003eType: EVAP canister eliminator system\u003c\/li\u003e\n\u003cli\u003eFitment: Ducati Panigale 1299 \/ 1299 S, 2015–2018\u003c\/li\u003e\n\u003cli\u003eConnector type: OEM-compatible plug-and-play\u003c\/li\u003e\n\u003cli\u003eCap material: heat-resistant rubber\u003c\/li\u003e\n\u003cli\u003eInstallation: no wiring cuts required\u003c\/li\u003e\n\u003cli\u003eIntended use: closed-circuit \/ motorsport only\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168763339018,"sku":"JP ES 002","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ES_002_bd59117a-1b06-443a-95ca-24d398e3a317.png?v=1780814041"},{"product_id":"eliminator-magnetspule-sls-jetprime-ducati-panigale-1299-s","title":"JetPrime SLS Solenoid Eliminator for Ducati Panigale 1299\/S (2015-2018) – JP ES 007","description":"\u003cp\u003eEngineered to OEM connector standards and built from premium-grade components, the JetPrime SLS Solenoid Eliminator JP ES 007 is a precision-made solution for the Ducati Panigale 1299\/S. It bypasses the solenoid valve in the SLS PAIR circuit and suppresses the resulting dashboard fault codes — cleanly, reliably, and without cutting a single wire.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBypasses the SLS PAIR circuit solenoid valve, eliminating the secondary air system from the drivetrain loop\u003c\/li\u003e\n\u003cli\u003eSuppresses dashboard fault codes triggered by the removal or deactivation of the SLS system\u003c\/li\u003e\n\u003cli\u003eGenuine plug-and-play fitment using an OEM-matched connector — no wire cutting, no splicing required\u003c\/li\u003e\n\u003cli\u003ePremium-quality internal components selected for long-term reliability under race conditions\u003c\/li\u003e\n\u003cli\u003eDeveloped and dyno-tested specifically for the Ducati Panigale 1299 and 1299 S (2015–2018)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Premium Materials\u003c\/h2\u003e\u003cp\u003eWhere generic eliminators rely on off-the-shelf connectors and budget resistors, the JetPrime JP ES 007 is assembled to a measurably higher standard. The OEM-spec connector interfaces directly with the factory wiring loom, ensuring a secure, vibration-resistant connection that requires no adaptation. Internal components are selected for thermal stability and long service life, making this eliminator equally suited to demanding track sessions and extended road use — within the limits noted below.\u003c\/p\u003e\u003cp\u003eJetPrime designed this unit specifically for the Panigale 1299 platform, meaning every tolerance, connector pin-out and resistance value is calibrated to this motorcycle's ECU. That specificity is what separates a proper eliminator from a universal workaround that may introduce new faults over time.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eFitting the JP ES 007 takes minutes. Locate the SLS solenoid connector in the airbox area, disconnect the factory solenoid, and plug in the eliminator. The OEM connector seats positively with an audible click. No additional tools, heat-shrink, or programming are required. Clear the stored fault codes with a diagnostic tool after installation and the dashboard will remain clean thereafter.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale 1299 (2015, 2016, 2017, 2018)\u003c\/li\u003e\n\u003cli\u003eDucati Panigale 1299 S (2015, 2016, 2017, 2018)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eJetPrime\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eJP ES 007\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eSLS solenoid eliminator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector type\u003c\/td\u003e\n\u003ctd\u003eOEM-matched direct-fit connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation method\u003c\/td\u003e\n\u003ctd\u003ePlug-and-play, no wire cutting required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eDucati Panigale 1299 \/ 1299 S (2015–2018)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntended use\u003c\/td\u003e\n\u003ctd\u003eRace use only — not road-legal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eImportant Notice\u003c\/h2\u003e\u003cp\u003eThis product is intended exclusively for racing and closed-circuit track use. It is not approved for use on public roads. Ensure compliance with the regulations of your racing series or circuit before fitting.\u003c\/p\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168763535626,"sku":"JP ES 007","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ES_007_ad69928e-adc8-43fd-967a-6a0e9b00ab37.png?v=1780814048"},{"product_id":"eliminator-seitenstanderschalter-jetprime-ducati-panigale-1299-s","title":"JetPrime Side Stand Switch Eliminator for Ducati Panigale 1299\/S (2015-2018) – JP ES 011","description":"\u003cp\u003ePurpose-built for the Ducati Panigale 1299, the JetPrime JP ES 011 side stand switch eliminator removes the one electrical gremlins that can ruin a track day — dashboard fault codes triggered by a removed or bypassed side stand. Plug it in, ride without interruption, and keep your attention on the apex where it belongs.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBypasses the OEM side stand switch circuit cleanly and permanently\u003c\/li\u003e\n\u003cli\u003eSuppresses the associated dashboard fault codes that appear after the switch is removed or disconnected\u003c\/li\u003e\n\u003cli\u003eTrue plug-and-play fitment using an OEM-spec connector — no cutting, no splicing, no soldering\u003c\/li\u003e\n\u003cli\u003eEngineered and validated specifically for the Ducati Panigale 1299 and 1299 S (2015-2018)\u003c\/li\u003e\n\u003cli\u003ePremium-grade components selected for long-term reliability under racing conditions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality \u0026amp; Installation\u003c\/h2\u003e\u003cp\u003eJetPrime have designed the JP ES 011 to mate directly with the factory wiring harness of the Panigale 1299. The OEM-format connector means installation takes minutes, not hours: locate the side stand switch loom, unplug the original switch, and plug in the eliminator. There is nothing to cut, tape or re-route. The result is a tidy, reversible modification that leaves the harness completely intact — important if the bike ever needs to return to road specification or be inspected at scrutineering.\u003c\/p\u003e\u003cp\u003eThe internal components are selected for durability in a race environment where heat, vibration and fuel residue are unavoidable realities. Unlike generic workshop fixes, this unit will not introduce additional resistance or interference into the circuit.\u003c\/p\u003e\u003ch2\u003eTrack Use \u0026amp; Application\u003c\/h2\u003e\u003cp\u003eWhen a Panigale 1299 is prepared for circuit use, the side stand is one of the first items removed to save weight and reduce the risk of grounding. Without an eliminator, the ECU detects the open circuit and logs a fault, which can illuminate warning lamps, restrict certain riding modes, or simply generate nuisance codes that cloud the diagnostic picture. The JP ES 011 closes that circuit correctly so the ECU behaves exactly as it would with the original switch present.\u003c\/p\u003e\u003cp\u003ePlease note: the JetPrime JP ES 011 is intended exclusively for motorsport and closed-circuit use. It is not approved for use on public roads.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis eliminator fits the following model exclusively:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale 1299 (2015-2018)\u003c\/li\u003e\n\u003cli\u003eDucati Panigale 1299 S (2015-2018)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eJetPrime\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eJP ES 011\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eSide stand switch eliminator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eDucati Panigale 1299 \/ 1299 S (2015-2018)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector type\u003c\/td\u003e\n\u003ctd\u003eOEM-spec plug-and-play connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eNo cutting or soldering required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntended use\u003c\/td\u003e\n\u003ctd\u003eMotorsport \/ closed-circuit racing only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168763568394,"sku":"JP ES 011","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ES_011_aebe0e70-2a2a-4736-a502-7ae17156abaa.png?v=1780814052"},{"product_id":"eliminator-sls-panigale-v2","title":"JetPrime Eliminator SLS Solenoid Valve Bypass – Ducati Panigale V2 955 (2020-2024) JP ES 007","description":"\u003cp\u003eUnlock the full potential of your Ducati Panigale V2 955 on track by eliminating the secondary air system entirely. The JetPrime Eliminator JP ES 007 bypasses the SLS-PAIR solenoid valve and simultaneously suppresses the resulting dashboard fault codes — giving you a clean instrument display and an engine free from the restrictive secondary air circuit.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBypasses the SLS-PAIR solenoid valve on the Ducati Panigale V2 955, removing a source of performance-robbing secondary air injection\u003c\/li\u003e\n\u003cli\u003eDeactivates dashboard fault codes triggered by disabling the SLS system, keeping your instrument cluster error-free during competition\u003c\/li\u003e\n\u003cli\u003eTrue plug-and-play installation using an OEM-matched connector — no wire cutting, no soldering, no irreversible modifications\u003c\/li\u003e\n\u003cli\u003eDeveloped and tested specifically for the Ducati Panigale V2 955 (2020-2024), ensuring a precise fit and reliable function\u003c\/li\u003e\n\u003cli\u003ePremium-grade components selected for long service life under the demanding thermal and vibration conditions of circuit riding\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesigned for the Track\u003c\/h2\u003e\u003cp\u003eRace teams and trackday regulars removing the standard exhaust system frequently encounter persistent fault codes as the ECU detects the missing secondary air solenoid signal. The JetPrime JP ES 007 closes that loop cleanly: it mimics the correct electrical load, so the dashboard stays clear and the ECU behaves as intended. The result is a focused, distraction-free riding experience from the moment you leave the pit lane. Installation takes minutes and requires no specialist tools — simply disconnect the original solenoid, plug in the JetPrime unit, and the system is complete.\u003c\/p\u003e\u003ch2\u003eBuild Quality\u003c\/h2\u003e\u003cp\u003eJetPrime engineered the JP ES 007 to match the OEM connector geometry exactly, removing any risk of misfit or intermittent contact. The internal components are rated for continuous operation in the elevated temperatures found in close proximity to a Panigale's exhaust headers, and the assembly undergoes function testing before despatch. This is a long-term solution, not a temporary workaround.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis eliminator is developed exclusively for the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDucati Panigale V2 955 — model years 2020, 2021, 2022, 2023, 2024\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eIt is not compatible with other Ducati models or engine variants. Verify your model year before fitting.\u003c\/p\u003e\u003ch2\u003eImportant Notice\u003c\/h2\u003e\u003cp\u003eThe JetPrime JP ES 007 is intended exclusively for racing and closed-circuit competition use. It is not approved for road use and must not be fitted to any motorcycle operated on public roads.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: JetPrime\u003c\/li\u003e\n\u003cli\u003ePart number: JP ES 007\u003c\/li\u003e\n\u003cli\u003eType: SLS solenoid valve eliminator \/ PAIR circuit bypass\u003c\/li\u003e\n\u003cli\u003eFitment: Ducati Panigale V2 955 (2020-2024)\u003c\/li\u003e\n\u003cli\u003eConnection: OEM plug-and-play connector\u003c\/li\u003e\n\u003cli\u003eInstallation: No wire cutting required\u003c\/li\u003e\n\u003cli\u003eIntended use: Racing \/ closed-circuit competition only\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168763699466,"sku":"JP ES 007","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ES_007_70ea97c5-4343-49cd-9dc3-b68e407a88c7.png?v=1780814057"},{"product_id":"jetprime-panigale-v2-eliminator-jp-es-002","title":"JetPrime Canister Eliminator Kit for Ducati Panigale V2 955 (2020-2024) — JP ES 002","description":"\u003cp\u003eEngineered exclusively for the Ducati Panigale V2 955 from 2020 to 2024, the JetPrime JP ES 002 canister eliminator kit carries the hallmarks of a specialist electronics accessory built to a precise Italian-influenced standard. Where factory EVAP systems add weight, complexity and unwanted fault codes to a track-focused machine, this plug-and-play solution removes them cleanly — no wire cutting, no improvised blanking, no compromise.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSuppresses the fuel-injection fault codes associated with the factory purge valve, keeping the dashboard clear during track sessions\u003c\/li\u003e\n\u003cli\u003eAllows complete removal of the EVAP system (activated carbon canister), the electronic purge valve and all associated hoses\u003c\/li\u003e\n\u003cli\u003eServes as a direct replacement for a failed or leaking purge valve, eliminating the root cause rather than masking it\u003c\/li\u003e\n\u003cli\u003ePlug-and-play design uses an OEM-spec connector for a direct, no-cut installation\u003c\/li\u003e\n\u003cli\u003eHeat-resistant rubber caps seal the vacated hose ports for long-term durability in high-temperature engine bay conditions\u003c\/li\u003e\n\u003cli\u003eDeveloped and tested specifically for the Ducati Panigale V2 955 (2020-2024) — no generic fitment guesswork\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign, Finish and Heritage\u003c\/h2\u003e\u003cp\u003eJetPrime has built its reputation on electronics accessories that meet the exacting demands of serious track riders. The JP ES 002 reflects that heritage: every component in the kit is chosen for reliability under sustained heat and vibration, with an OEM-grade connector that mates directly to the factory harness and heat-resistant rubber blanking caps that retain a factory-quality appearance once the canister is removed. The result is a clean, purposeful engine bay that looks as considered as it functions.\u003c\/p\u003e\u003ch2\u003eInstallation and Use\u003c\/h2\u003e\u003cp\u003eBecause the kit retains the factory connector interface, installation requires no specialist wiring knowledge. The purge valve eliminator plugs directly into the existing loom, and the supplied rubber caps seal the vacated vacuum ports. The entire EVAP assembly — canister, purge valve and hoses — can then be removed without triggering persistent fault codes on the Ducati's fuel-injection system.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis kit is designed and validated exclusively for the following motorcycle:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDucati Panigale V2 955 — model years 2020, 2021, 2022, 2023 and 2024\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eImportant Notice\u003c\/h2\u003e\u003cp\u003eThis kit is intended for closed-circuit motorsport use only. It is not approved for use on public roads and must not be fitted to any motorcycle operated on public highways.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: JetPrime\u003c\/li\u003e\n\u003cli\u003ePart number: JP ES 002\u003c\/li\u003e\n\u003cli\u003eType: EVAP canister eliminator \/ purge valve eliminator kit\u003c\/li\u003e\n\u003cli\u003eFitment: Ducati Panigale V2 955 (2020-2024)\u003c\/li\u003e\n\u003cli\u003eConnector type: OEM-spec direct plug-in, no wire cutting required\u003c\/li\u003e\n\u003cli\u003eCap material: heat-resistant rubber\u003c\/li\u003e\n\u003cli\u003eIntended use: closed-circuit motorsport only — not road legal\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168763797770,"sku":"JP ES 002","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ES_002_3cdf468b-ff1c-4605-b1da-bd1da0387d94.png?v=1780814059"},{"product_id":"jetprime-eliminator-rucklicht-v2","title":"JetPrime Tail Light Eliminator for Ducati Panigale V2 955 (2020-2024) – JP ES 012","description":"\u003cp\u003eSwap or remove the tail light on your Ducati Panigale V2 955 without a single dashboard fault code spoiling the result. The JetPrime JP ES 012 tail light eliminator is engineered specifically for the 2020-2024 Panigale V2 955, suppressing the instrument cluster error that appears the moment the OEM tail light circuit is broken. Installation takes minutes, no wire cutting required, and the bike reads as clean as it did from the factory.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEliminates dashboard fault codes triggered by tail light removal or replacement on the Panigale V2 955\u003c\/li\u003e\n\u003cli\u003ePlug-and-play design with an OEM-matched connector — fits directly into the existing loom without cutting or splicing\u003c\/li\u003e\n\u003cli\u003eDeveloped and tested specifically for the Ducati Panigale V2 955 (2020-2024) for guaranteed compatibility\u003c\/li\u003e\n\u003cli\u003eHigh-quality components chosen for long service life and consistent electrical performance\u003c\/li\u003e\n\u003cli\u003eClean, professional finish with no residual warnings on the TFT or instrument display\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThe JP ES 012 connects directly between the harness and the tail light position using the factory OEM plug. There is no need to cut, splice, or modify any wiring — the eliminator simply takes the place of the tail light load, fooling the ECU into registering a healthy circuit. The entire job can be completed trackside without specialist tools, making it the obvious choice for race-weekend preparation.\u003c\/p\u003e\u003ch2\u003eTrack Use Notice\u003c\/h2\u003e\u003cp\u003eThe JetPrime JP ES 012 is intended exclusively for competition and track use. It is not approved for road use and must not be fitted to any motorcycle operated on public roads.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis tail light eliminator fits the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDucati Panigale V2 955 — model years 2020, 2021, 2022, 2023, 2024\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eJetPrime\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eJP ES 012\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eTail light fault code eliminator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnection type\u003c\/td\u003e\n\u003ctd\u003eOEM plug-and-play connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eNo wire cutting required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eDucati Panigale V2 955 (2020-2024)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntended use\u003c\/td\u003e\n\u003ctd\u003eTrack \/ competition use only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168763961610,"sku":"JP ES 012","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ES_012.png?v=1780814068"},{"product_id":"eliminator-panigale-v2-side-stand","title":"JetPrime Side Stand Switch Eliminator – Ducati Panigale V2 955 (2020-2024) JP ES 011","description":"\u003cp\u003eWhen circuit regulations or track-day setups demand a clean, fault-free ECU environment, the JetPrime JP ES 011 side stand switch eliminator is the dedicated solution for the Ducati Panigale V2 955 (2020-2024). It bypasses the side stand switch entirely and suppresses the resulting dashboard fault codes in a single, no-cut installation — so your Panigale launches cleanly every time.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBypasses the OEM side stand switch, removing a common source of track-day cut-outs and ECU warnings on the Panigale V2 955\u003c\/li\u003e\n\u003cli\u003eEliminates dashboard fault codes triggered by side stand switch removal or modification — no error lights mid-session\u003c\/li\u003e\n\u003cli\u003ePlug-and-play design uses a direct OEM-compatible connector; zero cable cutting required\u003c\/li\u003e\n\u003cli\u003eEngineered and tested specifically for the Ducati Panigale V2 955 (2020-2024) — guaranteed connector and signal compatibility\u003c\/li\u003e\n\u003cli\u003eHigh-quality components selected for reliable performance under the demanding thermal and vibration conditions of track use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesigned for Racing Environments\u003c\/h2\u003e\u003cp\u003eOn circuit, every unnecessary OEM safety interlock is a potential liability. The JetPrime JP ES 011 eliminates the side stand switch loop cleanly, preventing the ECU from registering an open circuit and throwing fault codes that can interrupt ignition or flag a dashboard warning during a race or timed session. Because the kit uses a direct OEM-connector interface, installation takes minutes in the pit lane without tools beyond basic hand equipment — there is nothing to splice, solder, or tape.\u003c\/p\u003e\u003ch2\u003eBuild Quality\u003c\/h2\u003e\u003cp\u003eJetPrime has engineered the JP ES 011 to the same quality standards applied across its competition electronics range. The OEM-format connector ensures a positive, weatherproof engagement with the Panigale V2 955 wiring loom, and component selection is optimised for long service life even when subjected to heat cycles, vibration, and the general rigours of repeated track days and endurance racing.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis eliminator is designed and validated exclusively for the following motorcycle:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDucati Panigale V2 955 — model years 2020, 2021, 2022, 2023, 2024\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003ePlease note: the JP ES 011 is intended for racing and track use only and is not approved for road use or public highways.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eJetPrime\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eJP ES 011\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eSide stand switch eliminator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConnection\u003c\/th\u003e\n\u003ctd\u003eOEM plug-and-play connector — no cable cutting required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment\u003c\/th\u003e\n\u003ctd\u003eDucati Panigale V2 955 (2020-2024)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003ctd\u003eBypasses side stand switch and suppresses dashboard fault codes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntended Use\u003c\/th\u003e\n\u003ctd\u003eRacing and track use only — not approved for road use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168763994378,"sku":"JP ES 011","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ES_011_ae41918b-32c0-4307-80b6-477d3f0d5f1e.png?v=1780814069"},{"product_id":"jetprime-jp-es-007","title":"JetPrime Eliminator SLS Solenoid Bypass Kit – Ducati Panigale V4\/S\/R (2018-2024) JP ES 007","description":"\u003cp\u003eWhen you strip a Ducati Panigale V4, V4 S, or V4 R down for track duty, the secondary air system is one of the first things to go — and the JetPrime Eliminator SLS JP ES 007 is the clean, engineered solution purpose-built for exactly that job. It bypasses the SLS-PAIR circuit solenoid valve and simultaneously suppresses the resulting dashboard fault codes, so your dash stays clear and your focus stays on the lap.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBypasses the SLS-PAIR circuit solenoid valve completely, eliminating secondary air system interference at the track\u003c\/li\u003e\n\u003cli\u003eSuppresses dashboard fault codes triggered by SLS system removal — no warning lights, no distractions\u003c\/li\u003e\n\u003cli\u003eTrue plug-and-play fitment using an OEM-spec connector: no wire cutting, no splicing, no permanent modification\u003c\/li\u003e\n\u003cli\u003eDeveloped and tested specifically for the Ducati Panigale V4, V4 S, and V4 R (2018–2024)\u003c\/li\u003e\n\u003cli\u003ePremium-grade components selected for long-term reliability under race conditions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eRace-Ready Engineering\u003c\/h2\u003e\u003cp\u003eThe SLS (Secondary Air System) on the Panigale V4 platform exists for road-going emissions compliance. On circuit, it adds unwanted complexity and, once the system is removed or blocked as part of a full race build, the ECU flags a fault that clutters your dashboard. The JetPrime JP ES 007 resolves both issues in one small, well-made unit.\u003c\/p\u003e\u003cp\u003eThe eliminator ships with a factory-style OEM connector that plugs straight into the original harness position. There is no need to cut, splice, or tape any wiring — the installation is fully reversible, which matters when a bike needs to pass technical inspection or return to road configuration. Quality components throughout ensure the unit handles the vibration and heat cycles of sustained track use without degradation.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThe JetPrime Eliminator SLS JP ES 007 fits the following motorcycles:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale V4 (2018–2024)\u003c\/li\u003e\n\u003cli\u003eDucati Panigale V4 S (2018–2024)\u003c\/li\u003e\n\u003cli\u003eDucati Panigale V4 R (2018–2024)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eImportant Notice\u003c\/h2\u003e\u003cp\u003eThis product is intended exclusively for racing and closed-circuit competition use. It is not approved for use on public roads.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: JetPrime\u003c\/li\u003e\n\u003cli\u003ePart Number: JP ES 007\u003c\/li\u003e\n\u003cli\u003eFunction: SLS-PAIR circuit solenoid valve eliminator with dashboard fault code suppression\u003c\/li\u003e\n\u003cli\u003eConnector Type: OEM-spec plug-and-play connector\u003c\/li\u003e\n\u003cli\u003eInstallation: No wire cutting required; fully reversible\u003c\/li\u003e\n\u003cli\u003eFitment: Ducati Panigale V4 \/ V4 S \/ V4 R (2018–2024)\u003c\/li\u003e\n\u003cli\u003eIntended Use: Racing and closed-circuit competition only\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168764223754,"sku":"JP ES 007","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ES_007_1845fe1a-1fb7-42bc-b1f6-79341b073ffd.png?v=1780814081"},{"product_id":"jetprime-jp-es-002","title":"JetPrime EVAP Canister Eliminator Kit for Ducati Panigale V4\/S\/R (2018-2024) – JP ES 002","description":"\u003cp\u003eDesigned and validated exclusively for the Ducati Panigale V4, V4 S and V4 R from 2018 to 2024, the JetPrime JP ES 002 canister eliminator kit gives race-prepared riders a clean, code-free solution for removing the EVAP system in its entirety. Every component is engineered to OEM connector standards, so the installation is plug-and-play with no wire cutting required — and no fault codes left behind to interrupt your session.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEliminates Fi fault codes associated with the electronic purge valve, keeping the ECU clean and session-ready\u003c\/li\u003e\n\u003cli\u003eReplaces a failed or redundant purge valve with a purpose-built electronic eliminator using a direct OEM connector\u003c\/li\u003e\n\u003cli\u003eAllows full removal of the EVAP system (active carbon canister) and all associated hoses, reducing unnecessary mass and complexity\u003c\/li\u003e\n\u003cli\u003ePlug-and-play fitment — no wire cutting, no splicing, no permanent modifications to the wiring loom\u003c\/li\u003e\n\u003cli\u003eHeat-resistant rubber caps included for long-term durability under high engine-bay temperatures\u003c\/li\u003e\n\u003cli\u003eDeveloped and track-tested specifically for the Ducati Panigale V4\/S\/R platform across the full 2018–2024 production run\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSafety, Compliance and Intended Use\u003c\/h2\u003e\u003cp\u003eThis kit is approved for race and closed-circuit use only. It is not road-legal and must not be fitted to any motorcycle used on public roads. Before installation, riders should confirm the applicable regulations with their series technical officials. The OEM-spec connector and heat-resistant capping ensure the kit meets the demands of demanding track environments while keeping the installation reversible and safe for technical scrutiny.\u003c\/p\u003e\u003ch2\u003eBuild Quality\u003c\/h2\u003e\u003cp\u003eJetPrime has engineered the JP ES 002 to the same exacting standards that define their electronics catalogue. The electronic purge-valve eliminator ships with a genuine OEM-pattern connector for a secure, waterproof join directly to the Panigale's harness. Heat-resistant rubber caps seal the open hose ports against hot air and vibration, preventing ingress and maintaining long service life even on endurance machinery. The result is a compact, lightweight assembly that cleans up the under-tank area without compromise.\u003c\/p\u003e\u003ch2\u003ePerformance Benefit\u003c\/h2\u003e\u003cp\u003eRemoving the EVAP canister, purge valve and associated hoses from a Ducati Panigale V4 does more than tidy the engine bay. It eliminates a potential source of evaporative fuel vapour re-ingestion, removes the ECU's continuous self-check on the purge circuit, and strips weight and plumbing from a part of the machine where clean airflow and accessibility matter. On track, where every component needs to justify its presence, the JP ES 002 is a logical and proven first step in race preparation.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis kit fits the following motorcycles:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale V4 (2018–2024)\u003c\/li\u003e\n\u003cli\u003eDucati Panigale V4 S (2018–2024)\u003c\/li\u003e\n\u003cli\u003eDucati Panigale V4 R (2018–2024)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: JetPrime\u003c\/li\u003e\n\u003cli\u003ePart number: JP ES 002\u003c\/li\u003e\n\u003cli\u003eType: EVAP canister eliminator kit\u003c\/li\u003e\n\u003cli\u003eConnector type: OEM-pattern direct-fit connector\u003c\/li\u003e\n\u003cli\u003eInstallation: plug-and-play, no wire cutting required\u003c\/li\u003e\n\u003cli\u003eFitment: Ducati Panigale V4 \/ V4 S \/ V4 R, 2018–2024\u003c\/li\u003e\n\u003cli\u003eIntended use: race and closed-circuit use only — not road-legal\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168764420362,"sku":"JP ES 002","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ES_002_02178431-71e5-4eb2-8bfa-f456d42ee9a4.png?v=1780814085"},{"product_id":"jetprime-jp-es-012","title":"JetPrime Tail Light Eliminator for Ducati Panigale V4 \/ V4 S \/ V4 R (2018-2024) – JP ES 012","description":"\u003cp\u003eRemove the tail light from your Ducati Panigale V4, V4 S or V4 R and the dashboard will flag an error the moment you fire the engine — unless you fit the JetPrime JP ES 012 eliminator first. Designed specifically for the 2018-2024 Panigale V4 family, this compact plug-and-play module suppresses the fault signal at source, so your dash reads clean from the first lap and you can focus entirely on your riding.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEliminates dashboard error codes triggered by tail light removal or replacement on the Ducati Panigale V4, V4 S and V4 R\u003c\/li\u003e\n\u003cli\u003ePlug-and-play fitment using the OEM connector — no wire cutting, no splicing, no additional modifications required\u003c\/li\u003e\n\u003cli\u003eStraightforward installation that takes minutes, not hours, keeping workshop time to a minimum\u003c\/li\u003e\n\u003cli\u003eEvery component rigorously tested for long-term durability and consistent electrical performance\u003c\/li\u003e\n\u003cli\u003eDeveloped and validated exclusively for the Ducati Panigale V4 \/ V4 S \/ V4 R (2018-2024) — not a generic universal unit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePurpose-Built for Track Use\u003c\/h2\u003e\u003cp\u003eThe JetPrime JP ES 012 was conceived from the outset as a racing component. When a tail tidy or full race bodywork kit replaces the OEM tail section, the Panigale V4's ECU detects the missing tail light load and raises a fault. Left unaddressed, that fault can obscure other warnings and distract from track preparation. The JP ES 012 presents the correct electrical load to the ECU, keeping the instrument cluster clear and the rider's attention where it belongs — on the circuit.\u003c\/p\u003e\u003ch3\u003eOEM-Grade Connection\u003c\/h3\u003e\u003cp\u003eJetPrime supplies the JP ES 012 with an OEM-specification connector that mates directly with the bike's factory harness. There is no need to cut or permanently modify any wiring, making the fitment fully reversible should the bike ever return to road specification.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThe JetPrime JP ES 012 tail light eliminator fits the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale V4 — 2018 to 2024\u003c\/li\u003e\n\u003cli\u003eDucati Panigale V4 S — 2018 to 2024\u003c\/li\u003e\n\u003cli\u003eDucati Panigale V4 R — 2018 to 2024\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note: this product is intended exclusively for motorsport and closed-circuit use. It is not approved for use on public roads.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: JetPrime\u003c\/li\u003e\n\u003cli\u003ePart number: JP ES 012\u003c\/li\u003e\n\u003cli\u003eType: Tail light eliminator \/ dashboard error suppressor\u003c\/li\u003e\n\u003cli\u003eFitment: Ducati Panigale V4 \/ V4 S \/ V4 R (2018-2024)\u003c\/li\u003e\n\u003cli\u003eConnection: OEM plug-and-play connector\u003c\/li\u003e\n\u003cli\u003eInstallation: No wire cutting required\u003c\/li\u003e\n\u003cli\u003eIntended use: Motorsport \/ closed-circuit only — not road legal\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168764453130,"sku":"JP ES 012","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ES_012_7abadbf5-4ff8-4c4c-9549-a790dd9c2bb1.png?v=1780814085"},{"product_id":"jetprime-jp-es-014","title":"JetPrime Side Stand Switch Eliminator Honda CBR 1000 RR (2008-2019) JP ES 014","description":"\u003cp\u003eRemoving the side stand switch from your daily routine has never been simpler. The JetPrime JP ES 014 side stand switch eliminator is engineered specifically for the Honda CBR 1000 RR from 2008 to 2019, bypassing the switch cleanly while suppressing the dashboard fault code — no more irritating warning lights interrupting your ride.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBypasses the side stand switch entirely, eliminating nuisance fault triggers at source\u003c\/li\u003e\n\u003cli\u003eSuppresses the associated dashboard error display for a clean instrument read-out\u003c\/li\u003e\n\u003cli\u003ePlug-and-play fitment using the OEM connector — no wire cutting, no splicing required\u003c\/li\u003e\n\u003cli\u003eDesigned and tested exclusively for the Honda CBR 1000 RR (2008-2019) for guaranteed compatibility\u003c\/li\u003e\n\u003cli\u003ePremium-grade components built for long-term durability and reliable operation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eStraightforward Installation, Lasting Reliability\u003c\/h2\u003e\u003cp\u003eThe JP ES 014 arrives ready to fit. The included OEM-matched connector plugs directly into the existing wiring loom, meaning installation takes minutes rather than hours and leaves the harness completely intact. There is no need for soldering, crimping, or specialist tools — just unplug the original switch, connect the eliminator, and the job is done. For riders who want a tidy, reversible solution without permanent modifications, this is the practical choice.\u003c\/p\u003e\u003cp\u003eJetPrime has built this eliminator to the same high quality standards as the rest of the range. The components are selected for consistent electrical performance over time, so you are not trading reliability for convenience.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis eliminator is designed exclusively for the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eHonda CBR 1000 RR — model years 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eImportant Notice\u003c\/h2\u003e\u003cp\u003eThis product is intended for racing and track use only. It is not approved for use on public roads. Please ensure compliance with all applicable regulations before fitting.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eJetPrime\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eJP ES 014\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eSide stand switch eliminator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConnection Type\u003c\/th\u003e\n\u003ctd\u003eOEM plug-and-play connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment\u003c\/th\u003e\n\u003ctd\u003eHonda CBR 1000 RR (2008-2019)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eNo wire cutting required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntended Use\u003c\/th\u003e\n\u003ctd\u003eRacing \/ track use only — not road legal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168764485898,"sku":"JP ES 014","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ES_014.png?v=1780814090"},{"product_id":"jetprime-jp-es-011","title":"JetPrime Side Stand Eliminator for Ducati Panigale V4\/S\/R (2018-2024) – JP ES 011","description":"\u003cp\u003eWhen you remove the side stand for track use, the Ducati Panigale V4\/S\/R throws a dashboard fault code that can disrupt your session. The JetPrime Side Stand Eliminator JP ES 011 resolves this cleanly and permanently — suppressing the error signal at source without touching a single wire on your bike's loom.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBypasses the side stand switch signal to prevent ECU fault codes from triggering on the dashboard\u003c\/li\u003e\n\u003cli\u003ePlug-and-play design using an OEM-matched connector — no wire cutting, no splicing, no irreversible modifications\u003c\/li\u003e\n\u003cli\u003eDeveloped and validated specifically for the Ducati Panigale V4, V4 S, and V4 R across model years 2018 to 2024\u003c\/li\u003e\n\u003cli\u003eHigh-quality components selected for durability and reliable signal reproduction under race conditions\u003c\/li\u003e\n\u003cli\u003eClean, discrete installation that leaves the original wiring harness completely intact\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesigned for the Track\u003c\/h2\u003e\u003cp\u003eRiders preparing a Panigale V4 for circuit use routinely remove the side stand to reduce unsprung weight and eliminate any risk of accidental contact with the tarmac mid-corner. The factory side stand switch then sends a continuous fault to the dashboard — an irritation at best, a distraction at worst. The JP ES 011 plugs directly into the OEM socket vacated by the switch, feeding the ECU the correct resting signal and silencing the warning permanently.\u003c\/p\u003e\u003cp\u003eBecause the eliminator uses a genuine OEM-type connector, fitment is a matter of seconds rather than minutes. There is no need for soldering, heat-shrink tubing, or electrical tape. When you want to return the bike to road specification, the process reverses just as simply.\u003c\/p\u003e\u003ch2\u003eQuality and Safety\u003c\/h2\u003e\u003cp\u003eJetPrime manufactures the JP ES 011 to the same exacting standards applied across their competition electronics range. Every unit is tested for the Ducati Panigale V4 platform to ensure consistent signal output and connector integrity over the lifetime of your track programme. This is not a generic bypass resistor — it is a part engineered for a specific motorcycle and a specific application.\u003c\/p\u003e\u003cp\u003eImportant: The JP ES 011 is designed exclusively for racing and track-day use. It is not approved for use on public roads. Fitting this eliminator to a road-registered motorcycle may render the vehicle non-compliant with road traffic regulations. Always consult the relevant sporting regulations before fitting to a competition machine.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThe JetPrime JP ES 011 side stand eliminator is compatible with the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale V4 — 2018 to 2024\u003c\/li\u003e\n\u003cli\u003eDucati Panigale V4 S — 2018 to 2024\u003c\/li\u003e\n\u003cli\u003eDucati Panigale V4 R — 2018 to 2024\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: JetPrime\u003c\/li\u003e\n\u003cli\u003ePart number: JP ES 011\u003c\/li\u003e\n\u003cli\u003eFunction: Side stand switch eliminator \/ dashboard fault code suppressor\u003c\/li\u003e\n\u003cli\u003eConnector type: OEM-matching plug-and-play connector\u003c\/li\u003e\n\u003cli\u003eInstallation: No wire cutting required\u003c\/li\u003e\n\u003cli\u003eIntended use: Track \/ racing only — not road legal\u003c\/li\u003e\n\u003cli\u003eFitment: Ducati Panigale V4, V4 S, V4 R (2018–2024)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168764518666,"sku":"JP ES 011","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ES_011_b15b32fb-add6-412b-a906-833e83946449.png?v=1780814092"},{"product_id":"eliminator-jp-es-035","title":"JetPrime Eliminator Side Stand Switch Kit – Honda CBR 1000 RR-R SC82 (2020-2026) JP ES 035","description":"\u003cp\u003eBuilt to exacting quality standards from premium components, the JetPrime JP ES 035 Eliminator bypasses the side stand switch on the Honda CBR 1000 RR-R SC82 and simultaneously suppresses the dashboard fault codes that follow — giving you a clean, error-free instrument display the moment you hit the pit lane.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBypasses the side stand switch cleanly, eliminating the root cause of related fault codes on the CBR 1000 RR-R SC82\u003c\/li\u003e\n\u003cli\u003eSuppresses dashboard fault warnings triggered by side stand switch removal or bypass\u003c\/li\u003e\n\u003cli\u003eGenuine OEM-specification connector for a direct, plug-and-play installation — no wire cutting required\u003c\/li\u003e\n\u003cli\u003eHigh-quality internal components engineered for long service life and consistent reliability under race conditions\u003c\/li\u003e\n\u003cli\u003eDeveloped and tested specifically for the Honda CBR 1000 RR-R SC82 (2020-2026) — not a generic adapter\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePremium Build, Race-Proven Reliability\u003c\/h2\u003e\u003cp\u003eJetPrime's approach to this eliminator reflects the same attention to detail found across their wider electronics range. The JP ES 035 uses precision-matched, OEM-grade connectors that seat firmly into the factory wiring loom without modification. There is no soldering, no splicing, and no risk of damaged insulation — the harness remains in its original condition throughout. The internal electronics are selected for durability in the demanding thermal and vibration environment of a race-prepped superbike, ensuring the eliminator performs consistently session after session.\u003c\/p\u003e\u003ch2\u003eTrack Use and Installation\u003c\/h2\u003e\u003cp\u003eOn the CBR 1000 RR-R SC82, removing or disabling the side stand switch without an appropriate eliminator results in persistent fault codes and warning lights that can interfere with race electronics or distract during a session. The JP ES 035 resolves this at the source. Installation is straightforward: unplug the original switch, connect the JP ES 035 in its place, and the system recognises a valid signal immediately. No diagnostic tool is needed to clear codes after fitting.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThe JetPrime JP ES 035 is designed and verified exclusively for the following:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eHonda CBR 1000 RR-R SC82 — model years 2020, 2021, 2022, 2023, 2024, 2025, 2026\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003ePlease confirm your exact model year before ordering. This product is not compatible with other CBR variants.\u003c\/p\u003e\u003ch2\u003eImportant Safety Notice\u003c\/h2\u003e\u003cp\u003eThis product is intended exclusively for motorsport and track use. It is not approved for use on public roads.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: JetPrime\u003c\/li\u003e\n\u003cli\u003ePart number: JP ES 035\u003c\/li\u003e\n\u003cli\u003eProduct type: Side stand switch eliminator\u003c\/li\u003e\n\u003cli\u003eFitment: Honda CBR 1000 RR-R SC82 (2020-2026)\u003c\/li\u003e\n\u003cli\u003eConnection type: OEM-specification plug-and-play connector\u003c\/li\u003e\n\u003cli\u003eInstallation: No wire cutting or splicing required\u003c\/li\u003e\n\u003cli\u003eIntended use: Track \/ motorsport only\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168764649738,"sku":"JP ES 035","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ES_035.png?v=1780814101"},{"product_id":"eliminator-seitenstanderschalter-jetprime-kawasaki-zx-6r","title":"JetPrime Side Stand Eliminator for Kawasaki ZX-6R \/ 636 \/ RR (2003-2026) – JP ES 013","description":"\u003cp\u003eTired of dashboard error codes interrupting your track sessions? The JetPrime JP ES 013 side stand eliminator lets you bypass the side stand switch on your Kawasaki ZX-6R, 636, or RR in minutes, suppressing fault codes at the source without cutting a single wire. Designed specifically for the ZX-6R platform across every model year from 2003 to 2026, it is the straightforward, affordable fix that keeps your dash clean and your focus on the riding.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBypasses the side stand switch signal completely, preventing nuisance cut-outs on track\u003c\/li\u003e\n\u003cli\u003eSuppresses the associated dashboard error code so the instrument cluster reads normally\u003c\/li\u003e\n\u003cli\u003ePlug-and-play fitment using an OEM-matched connector — no wire cutting, no splicing required\u003c\/li\u003e\n\u003cli\u003eDeveloped and tested exclusively for the Kawasaki ZX-6R \/ 636 \/ RR (2003-2026) for a guaranteed correct fit\u003c\/li\u003e\n\u003cli\u003ePremium-grade components ensure long-term reliability even in demanding track conditions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEveryday Usability and Installation\u003c\/h2\u003e\u003cp\u003eThe JP ES 013 is built around the idea that reliability should not require a wiring degree. The included OEM-spec connector plugs directly into the factory harness at the side stand switch location. The whole job takes a matter of minutes: unplug the original switch, plug in the JetPrime eliminator, and the fault code disappears. There is no permanent modification to your loom, so the bike can be returned to standard specification just as quickly if required.\u003c\/p\u003e\u003ch2\u003eBuild Quality\u003c\/h2\u003e\u003cp\u003eJetPrime has engineered this eliminator to the same standard as the rest of their electronics range. High-quality internal components maintain stable signal suppression lap after lap, and the sealed OEM-style housing resists the heat, vibration, and moisture typical of race environments. The result is a component that delivers consistent, trouble-free performance without adding complexity to your setup.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis eliminator is designed and tested for the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKawasaki ZX-6R — 2003 to 2026\u003c\/li\u003e\n\u003cli\u003eKawasaki ZX-6R 636 — 2003 to 2026\u003c\/li\u003e\n\u003cli\u003eKawasaki ZX-6RR — 2003 to 2026\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note: this product is intended for race and track use only and is not approved for use on public roads.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: JetPrime\u003c\/li\u003e\n\u003cli\u003ePart number: JP ES 013\u003c\/li\u003e\n\u003cli\u003eType: Side stand switch eliminator\u003c\/li\u003e\n\u003cli\u003eFitment: Kawasaki ZX-6R \/ 636 \/ RR (2003-2026)\u003c\/li\u003e\n\u003cli\u003eConnection: OEM-matched plug-and-play connector\u003c\/li\u003e\n\u003cli\u003eInstallation: No wire cutting required\u003c\/li\u003e\n\u003cli\u003eIntended use: Race and track only\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168764813578,"sku":"JP ES 013","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JPES013.png?v=1780814107"},{"product_id":"eliminator-magnetspule-sls-jetprime-kawasaki-zx-6r","title":"JetPrime SLS PAIR Circuit Solenoid Eliminator for Kawasaki ZX-6R \/ 636 \/ RR (2007–2022) – JP ES 007","description":"\u003cp\u003eThe JetPrime JP ES 007 solenoid eliminator carries the precise engineering and purposeful design that have made JetPrime a trusted name in competition electronics. Purpose-built for the Kawasaki ZX-6R, 636 and RR across the full 2007–2022 model range, this plug-and-play unit bypasses the SLS PAIR circuit solenoid valve and simultaneously suppresses the dashboard fault code that would otherwise follow — a clean, considered solution with a fitment-first heritage behind it.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBypasses the SLS PAIR circuit solenoid valve on Kawasaki ZX-6R \/ 636 \/ RR (2007–2022), eliminating the secondary air system from the circuit\u003c\/li\u003e\n\u003cli\u003eSuppresses the resulting dashboard fault\/error indicator — no warning lights left active after installation\u003c\/li\u003e\n\u003cli\u003eTrue plug-and-play connection using an OEM-spec connector; no wire cutting, no splicing, no modification to the original loom\u003c\/li\u003e\n\u003cli\u003eDeveloped and tested specifically for the Kawasaki ZX-6R \/ 636 \/ RR model family across the complete 2007–2022 production run\u003c\/li\u003e\n\u003cli\u003ePremium-grade components selected for long-term reliability under sustained competition conditions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign, Finish and Heritage\u003c\/h2\u003e\u003cp\u003eJetPrime built its reputation supplying electronics to race teams who cannot afford downtime or unreliability. The JP ES 007 reflects that philosophy: every connector, housing and internal component is chosen to withstand the heat cycles, vibration and ambient conditions of track use. The OEM-specification connector ensures the eliminator integrates seamlessly with the factory harness, maintaining the neat, factory-quality appearance that sets professional builds apart from improvised solutions.\u003c\/p\u003e\u003cp\u003eUnlike generic bypass resistors or homemade plugs, the JP ES 007 is a finished product — designed with the same attention to detail and traceability that defines JetPrime's wider catalogue of race-grade accessories.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eInstallation requires no special tools and no permanent alteration to the motorcycle's wiring. Locate the SLS solenoid connector on the Kawasaki ZX-6R \/ 636 \/ RR, unplug the factory solenoid, and connect the JP ES 007 in its place. The OEM-matched plug seats positively first time. The dashboard fault code is cleared, and the bike is ready to run.\u003c\/p\u003e\u003ch2\u003eRace Use Notice\u003c\/h2\u003e\u003cp\u003eThe JetPrime JP ES 007 is designed exclusively for closed-circuit competition use. It is not approved for road use and must not be fitted to any motorcycle operated on public roads.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eKawasaki ZX-6R (2007–2022)\u003c\/li\u003e\n\u003cli\u003eKawasaki ZX-636 (2007–2022)\u003c\/li\u003e\n\u003cli\u003eKawasaki ZX-6RR (2007–2022)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eJetPrime\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eJP ES 007\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eSLS PAIR circuit solenoid eliminator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnection type\u003c\/td\u003e\n\u003ctd\u003eOEM-spec plug-and-play connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eNo wire cutting required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eKawasaki ZX-6R \/ 636 \/ RR (2007–2022)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntended use\u003c\/td\u003e\n\u003ctd\u003eClosed-circuit competition only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168764911882,"sku":"JP ES 007","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ES_007_dacfdcc3-e657-4779-9a13-b4ea2bcf1cee.png?v=1780814108"},{"product_id":"eliminator-magnetspule-sls-jetprime-kawasaki-zx-10-r","title":"JetPrime SLS Solenoid Eliminator for Kawasaki ZX-10 R\/RR (2004-2026) – JP ES 007","description":"\u003cp\u003eThe JetPrime JP ES 007 SLS Solenoid Eliminator is engineered specifically for the Kawasaki ZX-10 R and ZX-10 RR across its entire 2004-2026 production run. Built to the exacting standards that define JetPrime's electronics range, this kit bypasses the PAIR-circuit solenoid valve of the secondary air system and simultaneously eliminates the dashboard fault codes that would otherwise accompany its removal — leaving your instrument cluster clean and your engine breathing freely.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBypasses the SLS PAIR-circuit solenoid valve without cutting or modifying the factory wiring harness\u003c\/li\u003e\n\u003cli\u003eSuppresses dashboard error codes triggered by the removal or deactivation of the secondary air system\u003c\/li\u003e\n\u003cli\u003ePlug-and-play fitment using a precision OEM-specification connector for a direct, secure connection\u003c\/li\u003e\n\u003cli\u003eConstructed from high-quality components selected for long-term durability and consistent reliability under race conditions\u003c\/li\u003e\n\u003cli\u003eDeveloped and validated exclusively for the Kawasaki ZX-10 R and ZX-10 RR (2004-2026)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Premium Materials\u003c\/h2\u003e\u003cp\u003eWhere generic eliminators rely on loose connectors and afterthought wiring, the JP ES 007 is built around an OEM-grade connector that mates directly with the factory loom. Every component in the circuit is selected for thermal stability and vibration resistance — qualities that matter when a ZX-10 R is being pushed hard on a race circuit. The result is a unit that installs cleanly, sits securely, and requires no further attention once fitted.\u003c\/p\u003e\u003ch2\u003eHow It Works\u003c\/h2\u003e\u003cp\u003eThe secondary air system — referred to by Kawasaki as the SLS (Secondary Lean System) — introduces fresh air into the exhaust ports to reduce unburned hydrocarbons. When this system is removed or blocked as part of a race or track-day preparation, the ECU detects an open circuit at the solenoid and triggers a fault code. The JP ES 007 presents the correct electrical load to the ECU in place of the solenoid, convincing the system that the circuit is intact and preventing any warning lights or fault entries from appearing on the dashboard.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis eliminator is designed and tested for the following motorcycles:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKawasaki ZX-10 R (2004-2026)\u003c\/li\u003e\n\u003cli\u003eKawasaki ZX-10 RR (2004-2026)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSafety Notice\u003c\/h2\u003e\u003cp\u003eThis product is intended exclusively for race and closed-circuit competition use. It is not approved for road use or for use on public highways.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: JetPrime\u003c\/li\u003e\n\u003cli\u003ePart number: JP ES 007\u003c\/li\u003e\n\u003cli\u003eFunction: SLS PAIR-circuit solenoid eliminator with fault code suppression\u003c\/li\u003e\n\u003cli\u003eConnector type: OEM-specification direct-fit connector\u003c\/li\u003e\n\u003cli\u003eInstallation: Plug-and-play, no wiring cuts required\u003c\/li\u003e\n\u003cli\u003eFitment: Kawasaki ZX-10 R \/ ZX-10 RR, 2004-2026\u003c\/li\u003e\n\u003cli\u003eIntended use: Race and closed-circuit competition only\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168765174026,"sku":"JP ES 007","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ES_007_bc7e7a18-7c1c-4404-9f26-edf14c394171.png?v=1780814116"},{"product_id":"eliminator-seitenstanderschalter-jetprime-kawasaki-zx-10-r","title":"JetPrime Side Stand Eliminator for Kawasaki ZX-10 R\/RR (2004-2026) – JP ES 013","description":"\u003cp\u003eRidden hard all day on circuit, the last thing you need is a spurious dashboard fault code pulling your focus from the next braking point. The JetPrime Side Stand Eliminator JP ES 013 is purpose-built for the Kawasaki ZX-10 R\/RR across its full 2004–2026 production run, cleanly bypassing the side stand switch and silencing any related dashboard errors so you can concentrate entirely on performance.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBypasses the side stand switch circuit completely, eliminating the root cause of related fault codes\u003c\/li\u003e\n\u003cli\u003eSuppresses dashboard error warnings triggered by side stand switch removal or track preparation\u003c\/li\u003e\n\u003cli\u003eGenuine plug-and-play installation using an OEM-matched connector — no wire cutting, no splicing required\u003c\/li\u003e\n\u003cli\u003eHigh-quality components engineered for long-term reliability under race conditions\u003c\/li\u003e\n\u003cli\u003eDeveloped and tested specifically for the Kawasaki ZX-10 R and ZX-10 RR (2004–2026)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eClean Installation, Zero Compromise\u003c\/h2\u003e\u003cp\u003eThe JP ES 013 ships with a connector that matches the factory wiring harness exactly. Fitting takes minutes: simply unplug the original switch, connect the eliminator in its place, and the job is done. There is no need to cut, splice or modify the original loom, which keeps your bike's wiring fully reversible and tidy. Whether you are preparing a dedicated track bike or simply removing a redundant component for a cleaner build, the installation demands nothing beyond basic mechanical familiarity.\u003c\/p\u003e\u003ch2\u003eBuilt for the Track\u003c\/h2\u003e\u003cp\u003eJetPrime designs this eliminator to the same quality standards applied across their race electronics range. The components are selected to withstand the vibration, heat and electrical demands of repeated track days and competition use. The result is a reliable, set-and-forget solution that removes a common source of dashboard confusion without any ongoing maintenance.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis eliminator is designed and validated exclusively for the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKawasaki ZX-10 R – all variants, 2004 to 2026\u003c\/li\u003e\n\u003cli\u003eKawasaki ZX-10 RR – all variants, 2004 to 2026\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note: this product is approved for race and track use only and is not road-legal. It must not be used on vehicles operated on public roads.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: JetPrime\u003c\/li\u003e\n\u003cli\u003ePart number: JP ES 013\u003c\/li\u003e\n\u003cli\u003eFunction: side stand switch eliminator with dashboard error suppression\u003c\/li\u003e\n\u003cli\u003eInstallation: plug-and-play, OEM-matched connector\u003c\/li\u003e\n\u003cli\u003eWire modification required: none\u003c\/li\u003e\n\u003cli\u003eIntended use: race and track use only — not road-legal\u003c\/li\u003e\n\u003cli\u003eFitment: Kawasaki ZX-10 R \/ ZX-10 RR, 2004–2026\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168765239562,"sku":"JP ES 013","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JPES013_7f79912d-a363-441b-8b47-49efa7891298.png?v=1780814123"},{"product_id":"jetprime-jp-es-019","title":"JetPrime Side Stand Switch Eliminator for Suzuki GSX-R 600\/750 (2012-2017) – JP ES 019","description":"\u003cp\u003ePrecision-engineered from the outset for track-day and race use, the JetPrime JP ES 019 side stand switch eliminator is built to the exacting standards that professional Suzuki GSX-R 600\/750 racers demand. Where flimsy aftermarket alternatives rely on bare wire bypasses, JetPrime supply a complete OEM-grade connector assembly — same plug, same fit, zero compromise on integrity or longevity.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBypasses the side stand switch entirely, eliminating the cut-out circuit that can interrupt power at the worst possible moment on track\u003c\/li\u003e\n\u003cli\u003eSuppresses dashboard fault codes triggered by an absent or removed side stand switch — no warning lights, no ECU confusion\u003c\/li\u003e\n\u003cli\u003ePlug-and-play fitment via OEM-specification connectors — no wire cutting, no soldering, no irreversible modifications to the factory loom\u003c\/li\u003e\n\u003cli\u003eHigh-quality components selected for durability under sustained race conditions\u003c\/li\u003e\n\u003cli\u003eDesigned and tested exclusively for the Suzuki GSX-R 600\/750 (2012-2017) — not a generic solution adapted from another platform\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Premium Materials\u003c\/h2\u003e\u003cp\u003eThe JP ES 019 distinguishes itself through the calibre of its connector hardware. JetPrime specify OEM-matching plugs that seat with the same positive click and retention force as the original Suzuki component. The wiring is rated for the electrical environment of a stripped race machine, resisting heat, vibration and the abrasion that kills budget eliminators over a season. Every unit leaves the JetPrime facility having been validated against the GSX-R 600\/750 wiring architecture, so the fit is exact and the suppression of fault signals is complete from the first installation.\u003c\/p\u003e\u003ch2\u003eRace Use and Practical Benefits\u003c\/h2\u003e\u003cp\u003eWhen a GSX-R 600 or 750 is prepared for circuit competition, the side stand is almost always removed to save weight and reduce crash damage risk. Without an eliminator in place, the ECU registers an open circuit, displays a fault on the dashboard and — depending on the bike's software state — may limit or interrupt engine operation. The JetPrime JP ES 019 closes that circuit cleanly, restoring normal ECU behaviour and giving the rider one less variable to manage at the start of a session. Installation takes a matter of minutes and leaves the factory harness completely intact, so the bike can be returned to road-legal specification without any evidence of modification.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis eliminator is engineered specifically for the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSuzuki GSX-R 600 — model years 2012, 2013, 2014, 2015, 2016, 2017\u003c\/li\u003e\n\u003cli\u003eSuzuki GSX-R 750 — model years 2012, 2013, 2014, 2015, 2016, 2017\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAlways verify the connector type on your specific machine before installation. This product is intended exclusively for closed-circuit motorsport use and is not approved for use on public roads.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: JetPrime\u003c\/li\u003e\n\u003cli\u003ePart number: JP ES 019\u003c\/li\u003e\n\u003cli\u003eType: Side stand switch eliminator\u003c\/li\u003e\n\u003cli\u003eConnection: OEM-specification plug-and-play connector\u003c\/li\u003e\n\u003cli\u003eInstallation: No wire cutting or soldering required\u003c\/li\u003e\n\u003cli\u003eFitment: Suzuki GSX-R 600\/750 (2012-2017)\u003c\/li\u003e\n\u003cli\u003eIntended use: Closed-circuit motorsport \/ race use only — not road legal\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168765567242,"sku":"JP ES 019","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ES_019.png?v=1780814134"},{"product_id":"eliminator-magnetspule-sls-jetprime-suzuki-gsx-r-1000","title":"JetPrime Eliminator SLS Solenoid Bypass Kit Suzuki GSX-R 1000 (2017-2023) JP ES 007","description":"\u003cp\u003eChasing a cleaner dashboard and a tidier secondary air system delete on your GSX-R 1000? The JetPrime Eliminator JP ES 007 is the no-fuss solution — a purpose-built solenoid bypass unit that suppresses the SLS PAIR circuit fault codes at their source, so your dashboard stays clear and your bike runs as intended after an SLS removal. No wire cutting, no guesswork, no workshop hours wasted.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBypasses the SLS PAIR circuit solenoid valve, eliminating the root cause of fault codes triggered by secondary air system removal\u003c\/li\u003e\n\u003cli\u003eSuppresses dashboard error warnings automatically once installed — no additional coding or mapping required\u003c\/li\u003e\n\u003cli\u003ePlug-and-play fitment using an OEM-matched connector for a direct, secure connection\u003c\/li\u003e\n\u003cli\u003eNo wire cutting or splicing needed — the harness remains intact and fully reversible\u003c\/li\u003e\n\u003cli\u003eDesigned and validated specifically for the Suzuki GSX-R 1000 (2017-2023) — not a generic adapter\u003c\/li\u003e\n\u003cli\u003ePremium components selected for long-term durability under demanding track conditions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEveryday Usability and Straightforward Installation\u003c\/h2\u003e\u003cp\u003eWhat sets the JP ES 007 apart from improvised bypass solutions is its OEM-grade connector. Plug it directly into the existing harness in place of the SLS solenoid and the ECU is satisfied — no fault stored, no warning light nagging you on a track day morning. The whole job takes minutes rather than hours, and because no wires are cut, returning the bike to standard specification is equally straightforward if you ever need to.\u003c\/p\u003e\u003cp\u003eThe kit is built to last. JetPrime specifies quality components throughout, so once installed it simply does its job session after session without attention. For riders who remove the secondary air system as part of a broader track or performance preparation, this eliminator closes the loop cleanly and lets you focus on riding rather than fault-finding.\u003c\/p\u003e\u003ch2\u003eTrack Use and Performance Context\u003c\/h2\u003e\u003cp\u003eRemoving the SLS PAIR system is a common step when preparing a GSX-R 1000 for circuit use — it reduces heat around the exhaust headers and eliminates unnecessary pipework. Without an eliminator, the ECU immediately flags the missing solenoid and may influence fuelling behaviour. The JetPrime JP ES 007 resolves that in one step, making it a sensible and cost-effective part of any track-prep parts list.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis eliminator is designed exclusively for the following motorcycle:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eSuzuki GSX-R 1000 — model years 2017, 2018, 2019, 2020, 2021, 2022, 2023\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003ePlease verify your model year before ordering. This product is intended for race and track use only and is not approved for road use.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: JetPrime\u003c\/li\u003e\n\u003cli\u003ePart number: JP ES 007\u003c\/li\u003e\n\u003cli\u003eType: SLS PAIR circuit solenoid eliminator\u003c\/li\u003e\n\u003cli\u003eFitment: Suzuki GSX-R 1000 (2017-2023)\u003c\/li\u003e\n\u003cli\u003eConnection: OEM-matched plug-and-play connector\u003c\/li\u003e\n\u003cli\u003eInstallation: No wire cutting required\u003c\/li\u003e\n\u003cli\u003eIntended use: Race and track use only — not road legal\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168765731082,"sku":"JP ES 007","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ES_007_2c20ac5a-7721-4201-a141-ed4b3f6fea5e.png?v=1780814141"},{"product_id":"jetprime-jp-absy-004","title":"JetPrime ABS Eliminator for Yamaha YZF-R3 (2015-2023) – JP ABSY 004","description":"\u003cp\u003eStripping weight from a track-focused YZF-R3 without triggering dashboard warnings is exactly what the JetPrime ABS Eliminator JP ABSY 004 is built for. Engineered specifically for the Yamaha YZF-R3 from 2015 to 2023, this plug-and-play kit removes the entire ABS system cleanly and keeps your instrument display error-free throughout every session.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRemoves the ABS system completely from the motorcycle, saving approximately 1 kg of unsprung weight\u003c\/li\u003e\n\u003cli\u003eSuppresses ABS fault codes so no warning light appears on the dashboard during racing\u003c\/li\u003e\n\u003cli\u003eOEM-matching connector for a direct, no-cut installation — no wiring modifications required\u003c\/li\u003e\n\u003cli\u003ePlug-and-play fitment keeps installation straightforward and fully reversible\u003c\/li\u003e\n\u003cli\u003eDeveloped and tested exclusively for the Yamaha YZF-R3 (2015–2023) for guaranteed compatibility\u003c\/li\u003e\n\u003cli\u003eHigh-quality components ensure lasting reliability under demanding track conditions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEngineered for the Track\u003c\/h2\u003e\u003cp\u003eOn circuit, ABS adds weight and introduces intervention that experienced riders neither need nor want. The JetPrime JP ABSY 004 lets you remove that hardware cleanly, recovering roughly 1 kg that would otherwise stay bolted to the motorcycle. Because the kit uses an OEM-spec connector, the ECU reads the circuit as complete and the dashboard remains clear — no fault codes, no distracting warning lights between sessions or on the formation lap.\u003c\/p\u003e\u003ch2\u003eInstallation \u0026amp; Build Quality\u003c\/h2\u003e\u003cp\u003eThe eliminator arrives ready to fit. The OEM-style plug seats directly into the existing harness without cutting, splicing, or repinning any wires, which means the installation can be reversed if the bike ever returns to road use. JetPrime manufactures the unit to a high quality standard with components selected for durability under the vibration and temperature cycles typical of track use.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis kit is designed and tested for the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eYamaha YZF-R3 — model years 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eJetPrime\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eJP ABSY 004\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eABS Eliminator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment\u003c\/th\u003e\n\u003ctd\u003eYamaha YZF-R3 (2015–2023)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight Saving\u003c\/th\u003e\n\u003ctd\u003eApproximately 1 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConnection\u003c\/th\u003e\n\u003ctd\u003eOEM plug-and-play connector, no cutting required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntended Use\u003c\/th\u003e\n\u003ctd\u003eTrack \/ motorsport use only — not road legal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003eNote: This product is intended exclusively for motorsport and track use. It is not approved for use on public roads.\u003c\/p\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168765763850,"sku":"JP ABSY 004","price":170.82,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ABSY_001.png?v=1780814145"},{"product_id":"eliminator-seitenstanderschalter-jetprime-yamaha-r3","title":"JetPrime Side Stand Eliminator for Yamaha YZF-R3 (2015-2023) – JP ES 013","description":"\u003cp\u003eThe JetPrime JP ES 013 side stand eliminator is purpose-engineered for the Yamaha YZF-R3, combining precision Italian craftsmanship with a plug-and-play design that has earned JetPrime a loyal following across club racing paddocks and track-day pits alike. Developed and tested specifically for the YZF-R3 from 2015 to 2023, it bypasses the side stand switch cleanly and silences the resulting dashboard fault codes — no wiring cuts, no guesswork.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBypasses the side stand switch entirely, preventing unintended cut-outs during track use\u003c\/li\u003e\n\u003cli\u003eEliminates dashboard error codes triggered by the side stand switch circuit\u003c\/li\u003e\n\u003cli\u003ePlug-and-play fitment via an OEM-matched connector — no cable cutting required\u003c\/li\u003e\n\u003cli\u003eDesigned and validated exclusively for the Yamaha YZF-R3 (2015-2023)\u003c\/li\u003e\n\u003cli\u003ePremium-grade components ensure lasting reliability under racing conditions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign, Finish and Heritage\u003c\/h2\u003e\u003cp\u003eJetPrime has built its reputation on producing electronics accessories that match the fit and finish of the original motorcycle harness. The JP ES 013 carries that philosophy through: the OEM-specification connector mates directly with the YZF-R3 loom with zero modification, and the compact unit tucks away neatly once installed. The attention to connector quality and material selection reflects the same standard JetPrime applies across its full range of Italian-designed motorcycle electronics, making this eliminator a natural choice for riders who demand both performance and longevity from every component they bolt on.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eInstallation is straightforward and requires no specialist tools. Locate the side stand switch connector on the YZF-R3 harness, unplug the factory switch, and connect the JP ES 013 in its place. The OEM connector ensures a secure, rattle-free fit. Once connected, the dashboard fault code associated with the side stand circuit is suppressed, and the motorcycle behaves as if the side stand is permanently stowed — ideal for race-prepared machines where the stand has been removed entirely.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis eliminator is confirmed to fit the following motorcycle:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eYamaha YZF-R3 — model years 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003ePlease note: this product is intended for race and track use only and is not approved for use on public roads.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eJetPrime\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eJP ES 013\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eSide stand switch eliminator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eYamaha YZF-R3 (2015-2023)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnection type\u003c\/td\u003e\n\u003ctd\u003eOEM plug-and-play connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eNo cable cutting required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntended use\u003c\/td\u003e\n\u003ctd\u003eRace and track use only — not road legal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168766025994,"sku":"JP ES 013","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JPES013_01385746-bfb5-461b-9c9e-3b0aa484071c.png?v=1780814154"},{"product_id":"eliminator-magnetspule-sls-jetprime-yamaha-r3-15-20","title":"JetPrime Eliminator SLS Solenoid Bypass Kit – Yamaha YZF-R3 (2015-2020) JP ES 007","description":"\u003cp\u003eRid your Yamaha YZF-R3 of unwanted dashboard fault codes and secondary air system interference with the JetPrime Eliminator JP ES 007 — a precision-engineered SLS solenoid bypass designed exclusively for the YZF-R3 from 2015 to 2020. Plug-and-play simplicity meets race-grade reliability, so you can focus entirely on performance without the distraction of recurring warning lights.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBypasses the SLS PAIR circuit solenoid valve cleanly and completely, eliminating the root cause of secondary air system fault codes\u003c\/li\u003e\n\u003cli\u003eDeactivates dashboard error warnings triggered by SLS system removal or modification — no more nuisance alerts mid-session\u003c\/li\u003e\n\u003cli\u003eTrue plug-and-play design uses an OEM-matching connector, meaning no wire cutting, no splicing and no irreversible modifications to the harness\u003c\/li\u003e\n\u003cli\u003eDeveloped and validated specifically for the Yamaha YZF-R3 (2015-2020) — guaranteed fitment with no guesswork\u003c\/li\u003e\n\u003cli\u003ePremium-grade components throughout ensure long service life even under demanding track conditions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhy the SLS Eliminator Matters on Track\u003c\/h2\u003e\u003cp\u003eThe Yamaha YZF-R3's Secondary Air System (SLS) is an emissions-control device fitted for road-homologation purposes. Once the bike is prepared for closed-circuit competition — whether via an aftermarket exhaust, race ECU mapping or air filter upgrade — the SLS solenoid becomes redundant and typically triggers a persistent fault code on the dashboard. That warning light is more than cosmetic: it can mask genuine faults and creates unnecessary distraction during a race or practice session.\u003c\/p\u003e\u003cp\u003eThe JetPrime JP ES 007 eliminates this problem at source. By presenting the correct electrical signal to the ECU in place of the SLS solenoid, the eliminator convinces the bike's management system that everything is in order — cleanly and without any permanent alteration to the wiring loom. The OEM-spec connector drops straight onto the factory plug, making the installation reversible and straightforward even in a paddock environment.\u003c\/p\u003e\u003ch2\u003eBuild Quality and Fitment Confidence\u003c\/h2\u003e\u003cp\u003eJetPrime engineered the JP ES 007 around the exact connector specification of the Yamaha YZF-R3, so the fit is precise and the connection secure. Internal components are selected for resilience against heat, vibration and the moisture exposure typical of race paddocks and outdoor circuit work. The result is an eliminator that will outlast the bike's competition life without any additional maintenance.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThe JetPrime Eliminator JP ES 007 is designed for the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eYamaha YZF-R3 — model years 2015, 2016, 2017, 2018, 2019, 2020\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eImportant Safety Notice\u003c\/h2\u003e\u003cp\u003eThis product is intended exclusively for closed-circuit racing and competition use. It is not approved for road use and must not be fitted to any motorcycle operated on public roads.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: JetPrime\u003c\/li\u003e\n\u003cli\u003ePart number: JP ES 007\u003c\/li\u003e\n\u003cli\u003eFunction: SLS PAIR circuit solenoid bypass \/ fault code eliminator\u003c\/li\u003e\n\u003cli\u003eConnector type: OEM-matching plug (no wire cutting required)\u003c\/li\u003e\n\u003cli\u003eInstallation: Plug-and-play\u003c\/li\u003e\n\u003cli\u003eFitment: Yamaha YZF-R3 (2015-2020)\u003c\/li\u003e\n\u003cli\u003eIntended use: Track \/ closed-circuit competition only\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168766091530,"sku":"JP ES 007","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ES_007_33b00be7-f99d-49fa-9fed-86bd3920f60c.png?v=1780814156"},{"product_id":"jetprime-jp-absy-001","title":"JetPrime ABS Eliminator for Yamaha YZF-R7 (2021-2026) – JP ABSY 001","description":"\u003cp\u003eEngineered specifically for the Yamaha YZF-R7 in its 2021–2026 guise, the JetPrime ABS Eliminator JP ABSY 001 is the clean, purposeful solution for riders preparing their R7 for track-day competition. Where lesser fixes leave a tangle of spliced wires and dashboard warning lights, JetPrime's heritage in race electronics shows in every detail — a precision plug-and-play connector that mirrors the OEM fitment, a design developed and tested exclusively on the YZF-R7, and a finish that speaks to the Italian manufacturer's commitment to quality over compromise.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCompletely removes the ABS module, saving approximately 1 kg of unsprung and system weight for sharper, more responsive braking feel on track.\u003c\/li\u003e\n\u003cli\u003eSuppresses all related dashboard fault codes, keeping the instrument display clean and distraction-free during competition.\u003c\/li\u003e\n\u003cli\u003eOEM-matched connector design allows direct, plug-and-play installation — no cutting, no splicing, no irreversible wiring changes.\u003c\/li\u003e\n\u003cli\u003eDeveloped and dyno-tested specifically for the Yamaha YZF-R7 (2021–2026), ensuring perfect electrical compatibility straight out of the box.\u003c\/li\u003e\n\u003cli\u003ePremium-grade components throughout, selected for the thermal and vibrational demands of circuit riding.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign, Finish and Heritage\u003c\/h2\u003e\u003cp\u003eJetPrime has built its reputation supplying race teams and serious club competitors across Europe with electronics that match factory standards in both quality and precision. The JP ABSY 001 reflects that lineage: the connector housing is constructed to OEM tolerances, the wiring is rated for race conditions, and the unit's compact form factor slots neatly into the space vacated by the ABS module. There are no rough edges, no afterthought crimps — just a component that looks as considered as the bike it was made for.\u003c\/p\u003e\u003ch2\u003ePerformance on Track\u003c\/h2\u003e\u003cp\u003eRemoving ABS from a dedicated track bike is a well-established step in extracting the most from your braking zones. The factory ABS module adds system weight and introduces an electronic variable that experienced riders prefer to eliminate when chasing consistent lap times. With the JP ABSY 001 fitted, that roughly 1 kg of module weight is gone, the braking circuit is simplified, and the dashboard remains clear of fault warnings that would otherwise demand attention mid-session. The result is a bike that feels lighter, more direct, and easier to read through every corner entry.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis ABS eliminator is designed exclusively for the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eYamaha YZF-R7 — model years 2021, 2022, 2023, 2024, 2025, 2026\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eNote: This product is intended solely for motorsport and closed-circuit track use. It is not approved for use on public roads.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eJetPrime\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eJP ABSY 001\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eABS eliminator kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eYamaha YZF-R7 (2021–2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003ePlug-and-play, OEM connector — no wiring cuts required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight saving\u003c\/td\u003e\n\u003ctd\u003eApproximately 1 kg (ABS module removal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntended use\u003c\/td\u003e\n\u003ctd\u003eTrack \/ motorsport use only — not road legal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168766124298,"sku":"JP ABSY 001","price":170.82,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ABSY_001_08da238d-b4f3-40b6-9df2-8e1c18d6f9ed.png?v=1780814161"},{"product_id":"jetprime-jp-es-018","title":"JetPrime Eliminator Side Stand Switch Bypass – Yamaha YZF-R6 (2003-2007) JP ES 018","description":"\u003cp\u003eCompeting on track demands a machine that responds without interruption — the JetPrime Eliminator JP ES 018 bypasses the side stand switch on the Yamaha YZF-R6 (2003–2007) and simultaneously suppresses the dashboard fault code that would otherwise follow, keeping your display clean and your focus entirely on riding.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBypasses the side stand switch circuit completely, eliminating unwanted cut-outs or hesitation caused by a faulty or removed switch\u003c\/li\u003e\n\u003cli\u003eSuppresses the dashboard error indication triggered by side stand switch bypass, so the instrument cluster reads normally\u003c\/li\u003e\n\u003cli\u003ePlug-and-play installation using an OEM-matched connector — no wire cutting, no splicing, no irreversible modifications\u003c\/li\u003e\n\u003cli\u003eDesigned and tested specifically for the Yamaha YZF-R6 model years 2003 to 2007, ensuring a precise electrical match\u003c\/li\u003e\n\u003cli\u003eHigh-quality components selected for long-term reliability under the demands of competition use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation \u0026amp; Reliability\u003c\/h2\u003e\u003cp\u003eThe JP ES 018 arrives ready to fit. The OEM-style connector plugs directly into the bike's existing wiring harness at the side stand switch position, making installation a matter of minutes with no specialist tools required. Because no wires are cut or permanently altered, the modification is fully reversible — useful when a bike transitions between track and road duties or changes hands. The quality of the internal components reflects JetPrime's commitment to parts that perform reliably lap after lap, season after season.\u003c\/p\u003e\u003ch2\u003eTrack Use \u0026amp; Purpose\u003c\/h2\u003e\u003cp\u003eRemoving or bypassing the side stand switch is a common step when preparing the Yamaha YZF-R6 for circuit use, particularly when crash protection, bodywork, or stand configurations differ from the factory setup. Without an eliminator, the ECU can log fault codes and the dashboard may display warnings that distract or cause concern mid-session. The JetPrime JP ES 018 resolves both issues in a single, clean installation. Please note that this product is intended exclusively for motorsport and track use and is not approved for road use.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis eliminator is engineered for the following application:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eYamaha YZF-R6 — model years 2003, 2004, 2005, 2006, 2007\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eAlways verify your model year and connector type before installation. If you are unsure of compatibility, contact the Inter-Pace team before ordering.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: JetPrime\u003c\/li\u003e\n\u003cli\u003ePart number: JP ES 018\u003c\/li\u003e\n\u003cli\u003eType: Side stand switch eliminator\u003c\/li\u003e\n\u003cli\u003eFitment: Yamaha YZF-R6 (2003–2007)\u003c\/li\u003e\n\u003cli\u003eConnection: OEM-matched plug-and-play connector\u003c\/li\u003e\n\u003cli\u003eInstallation: No wire cutting required\u003c\/li\u003e\n\u003cli\u003eIntended use: Track \/ motorsport only — not road legal\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168766255370,"sku":"JP ES 018","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JPES018.png?v=1780814164"},{"product_id":"eliminator-seitenstanderschalter-jetprime-yamaha-r6","title":"JetPrime Side Stand Switch Eliminator for Yamaha YZF-R6 (2008–2026) – JP ES 013","description":"\u003cp\u003eRid your Yamaha YZF-R6 of persistent side stand error codes in minutes with the JetPrime JP ES 013 eliminator. Engineered specifically for the YZF-R6 across the full 2008–2026 model range, this plug-and-play kit bypasses the side stand switch circuit and simultaneously suppresses the dashboard fault indicator — no warning lights, no interruptions, no cutting of original wiring.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBypasses the side stand switch entirely, eliminating the source of switch-related fault codes\u003c\/li\u003e\n\u003cli\u003eSuppresses the dashboard error display that follows side stand switch bypass\u003c\/li\u003e\n\u003cli\u003eTrue plug-and-play fitment using an OEM-spec connector — the original harness remains intact\u003c\/li\u003e\n\u003cli\u003eNo wire cutting required, keeping the electrical system clean and reversible\u003c\/li\u003e\n\u003cli\u003ePremium-grade components selected for lasting reliability under race conditions\u003c\/li\u003e\n\u003cli\u003eDeveloped and tested exclusively for the Yamaha YZF-R6 (2008–2026)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign and Build Quality\u003c\/h2\u003e\u003cp\u003eJetPrime built the JP ES 013 around an OEM-matched connector, so the eliminator drops straight into the existing wiring loom without modification. There is no splicing, no soldering and no need to disturb surrounding connectors. The internal components are selected to withstand the vibration and heat cycles typical of track use, and the housing is designed to sit neatly in the original switch location.\u003c\/p\u003e\u003ch2\u003eTrack Application\u003c\/h2\u003e\u003cp\u003eWhen a side stand is removed for circuit use, the stock ECU interprets the open circuit as a fault and logs an error that can illuminate the dash and, on some configurations, restrict normal operation. The JP ES 013 presents the correct signal to the ECU so the system behaves exactly as intended — with the side stand present and in the raised position. The result is a clean dashboard and undisturbed rideability for the duration of a race day.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis eliminator is designed and verified for the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eYamaha YZF-R6 — all variants, model years 2008 through 2026\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eJetPrime\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eJP ES 013\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eSide stand switch eliminator with dashboard error suppression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eYamaha YZF-R6 (2008–2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation Type\u003c\/td\u003e\n\u003ctd\u003ePlug-and-play, OEM connector, no wire cutting required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntended Use\u003c\/td\u003e\n\u003ctd\u003eRacing \/ track use only — not approved for road use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003eNotice: This product is approved for racing and track use only. It is not permitted for use on public roads.\u003c\/p\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168766353674,"sku":"JP ES 013","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JPES013_edda26e5-b0c3-4fc8-88e3-2a9b969dd2a1.png?v=1780814165"},{"product_id":"jetprime-jp-es-013","title":"JetPrime Side Stand Switch Eliminator for Yamaha YZF-R1\/M (2007-2026) – JP ES 013","description":"\u003cp\u003eBuilt to the exacting standards that serious track riders demand, the JetPrime JP ES 013 Side Stand Switch Eliminator is engineered from high-quality components with an OEM-spec connector that plugs directly into the Yamaha YZF-R1\/M harness — no wire cutting, no guesswork, no compromises. It bypasses the side stand switch cleanly while simultaneously suppressing the dashboard fault codes that would otherwise appear, keeping your instruments clean and your focus on the lap.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBypasses the side stand switch completely, eliminating nuisance cut-outs on track\u003c\/li\u003e\n\u003cli\u003eSuppresses dashboard fault codes triggered by side stand switch removal or bypass\u003c\/li\u003e\n\u003cli\u003eTrue plug-and-play fitment using an OEM-specification connector — no wire cutting required\u003c\/li\u003e\n\u003cli\u003ePremium-grade internal components chosen for long-term durability and consistent reliability\u003c\/li\u003e\n\u003cli\u003eDesigned and tested exclusively for the Yamaha YZF-R1\/M across model years 2007–2026\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eConstruction and Quality\u003c\/h2\u003e\u003cp\u003eJetPrime has built its reputation on electronics that meet the rigorous demands of motorsport. The JP ES 013 reflects that ethos: every component inside the unit is selected for its ability to endure the vibration, heat cycles, and electrical loads typical of track use. The OEM-matched connector means the unit seats securely in the original loom location without adapters or modifications, preserving the integrity of the factory wiring and making removal just as straightforward as installation.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eInstallation takes only minutes. Locate the side stand switch connector on the Yamaha YZF-R1\/M, unplug the original switch, and connect the JP ES 013 in its place. The eliminator handles the rest — the ECU receives the correct signal, the dashboard remains fault-free, and the bike operates without restriction. No specialist tools or wiring knowledge are required.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThe JetPrime JP ES 013 is designed and validated specifically for the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eYamaha YZF-R1 (2007–2026)\u003c\/li\u003e\n\u003cli\u003eYamaha YZF-R1M (2007–2026)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eImportant Notice\u003c\/h2\u003e\u003cp\u003eThis product is intended exclusively for closed-circuit motorsport use and is not approved for road use. It must not be fitted to any vehicle used on public roads.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: JetPrime\u003c\/li\u003e\n\u003cli\u003ePart number: JP ES 013\u003c\/li\u003e\n\u003cli\u003eType: Side stand switch eliminator\u003c\/li\u003e\n\u003cli\u003eConnector type: OEM-specification direct plug-in\u003c\/li\u003e\n\u003cli\u003eInstallation: Plug-and-play, no wire cutting required\u003c\/li\u003e\n\u003cli\u003eFitment: Yamaha YZF-R1 \/ YZF-R1M, 2007–2026\u003c\/li\u003e\n\u003cli\u003eIntended use: Closed-circuit motorsport (track use only)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168766583050,"sku":"JP ES 013","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JPES013_5e765f94-7316-4a92-bd9d-16413d17dbc7.png?v=1780814176"},{"product_id":"jetprime-jp-es-010","title":"JetPrime SLS PAIR Solenoid Eliminator for Yamaha YZF-R1\/M (2010-2026) – JP ES 010","description":"\u003cp\u003eBuilt exclusively for track and racing use, the JetPrime Eliminator JP ES 010 is the clean, professional solution for bypassing the SLS PAIR circuit solenoid valve on the Yamaha YZF-R1 and YZF-R1M across the full 2010–2026 model range. It simultaneously suppresses the dashboard fault code that would otherwise follow removal of the secondary air system, keeping your dash clean and your focus on lap times.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBypasses the SLS PAIR circuit solenoid valve cleanly and completely, eliminating secondary air injection interference at high revs\u003c\/li\u003e\n\u003cli\u003eSuppresses the resulting dashboard fault\/error code so your instrument cluster reads correctly on track\u003c\/li\u003e\n\u003cli\u003ePure plug-and-play installation using an OEM-matched connector — no wire cutting, no splicing, no irreversible modifications\u003c\/li\u003e\n\u003cli\u003eDesigned and validated specifically for the Yamaha YZF-R1 and YZF-R1M (2010–2026), ensuring correct electrical compatibility\u003c\/li\u003e\n\u003cli\u003eHigh-quality components chosen for long-term durability in the demanding heat and vibration environment of race use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePerformance on Track\u003c\/h2\u003e\u003cp\u003eThe SLS (Secondary Air System) feeds fresh air into the exhaust ports to aid catalytic after-burning — a requirement for road homologation that serves no purpose on a race-prepared R1. Left in place during track use it can affect exhaust gas scavenging behaviour and introduce unwanted variables in throttle response. The JetPrime JP ES 010 eliminates the solenoid from the circuit entirely, allowing the engine and exhaust system to perform as intended without the ECU triggering a fault lamp.\u003c\/p\u003e\u003cp\u003eBecause installation requires nothing more than unplugging the factory connector and plugging in the JetPrime unit, the process is reversible should the bike need to return to road specification. The OEM-format connector sits flush and secure, with no risk of intermittent contact under race conditions.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis eliminator is engineered specifically for the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eYamaha YZF-R1 — all variants, model years 2010 to 2026\u003c\/li\u003e\n\u003cli\u003eYamaha YZF-R1M — all variants, model years 2015 to 2026\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: JetPrime\u003c\/li\u003e\n\u003cli\u003ePart number: JP ES 010\u003c\/li\u003e\n\u003cli\u003eFunction: SLS PAIR circuit solenoid eliminator with dashboard error suppression\u003c\/li\u003e\n\u003cli\u003eInstallation: Plug-and-play, OEM-matched connector, no wire cutting required\u003c\/li\u003e\n\u003cli\u003eFitment: Yamaha YZF-R1 \/ YZF-R1M (2010–2026)\u003c\/li\u003e\n\u003cli\u003eIntended use: Racing and track use only — not approved for road use\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNote: This product is approved for racing and track use only. It is not permitted for use on public roads.\u003c\/p\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168766615818,"sku":"JP ES 010","price":24.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JPES010.png?v=1780814178"},{"product_id":"jetprime-jp-absa-001","title":"JetPrime Eliminator ABS System for Aprilia RS 660 2020-2026 – JP ABSA 001","description":"\u003cp\u003eEngineered exclusively for the Aprilia RS 660, the JetPrime Eliminator ABS System JP ABSA 001 is the definitive plug-and-play solution for riders who demand every gram and every millisecond on track. By allowing the complete removal of the ABS module, this precision-crafted kit trims approximately 1 kg from the machine while silencing every related dashboard fault code — cleanly, instantly, without cutting a single wire.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEnables full removal of the ABS system and module, saving approximately 1 kg in unsprung and chassis mass\u003c\/li\u003e\n\u003cli\u003eSuppresses all ABS-related dashboard fault codes after module removal, keeping the instrument cluster clean during track use\u003c\/li\u003e\n\u003cli\u003eOEM-spec connector included for a genuine plug-and-play fit — no wire cutting, no splicing, no irreversible modifications\u003c\/li\u003e\n\u003cli\u003eDeveloped and tested specifically for the Aprilia RS 660 model years 2020 to 2026, ensuring precise electrical compatibility\u003c\/li\u003e\n\u003cli\u003ePremium-grade components throughout for long-term reliability under race conditions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign, Finish and Heritage\u003c\/h2\u003e\u003cp\u003eJetPrime has built its reputation on race-proven electronics engineered to exacting Italian standards. The JP ABSA 001 reflects that heritage: every connector, every circuit path and every housing component is selected for durability in the demanding environment of a racing motorcycle. The kit ships with a purpose-manufactured OEM-pattern connector that mates directly to the RS 660 wiring loom, preserving the integrity of the harness and allowing the modification to be reversed if the bike ever returns to road or homologation duties. There is no bodged wiring, no generic adaptors — just a product designed around this specific motorcycle from the outset.\u003c\/p\u003e\u003ch2\u003ePerformance Gain and Track Application\u003c\/h2\u003e\u003cp\u003eRemoving the ABS module is a well-established weight-reduction step in RS 660 race preparation. The approximately 1 kg saved directly reduces the mass the chassis must manage under braking and acceleration, contributing to sharper turn-in and more responsive deceleration feedback to the rider. The JetPrime eliminator ensures the ECU and dashboard accept the absence of the ABS module without complaint, so the rider can concentrate fully on the session rather than chasing phantom warning lights.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis kit is designed and tested for the following motorcycle:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eAprilia RS 660 — model years 2020, 2021, 2022, 2023, 2024, 2025, 2026\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eAlways confirm your model year and variant before installation. This product is intended for track and race use only and is not approved for use on public roads.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: JetPrime\u003c\/li\u003e\n\u003cli\u003ePart number: JP ABSA 001\u003c\/li\u003e\n\u003cli\u003eType: ABS eliminator kit\u003c\/li\u003e\n\u003cli\u003eFitment: Aprilia RS 660 (2020-2026)\u003c\/li\u003e\n\u003cli\u003eConnection type: OEM-spec plug-and-play connector\u003c\/li\u003e\n\u003cli\u003eWeight saving: approximately 1 kg (upon removal of ABS module)\u003c\/li\u003e\n\u003cli\u003eInstallation: no wire cutting required\u003c\/li\u003e\n\u003cli\u003eIntended use: track and race use only — not road legal\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWarning: This product is intended exclusively for motorsport and racing use. It is not approved for use on public roads.\u003c\/p\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168812622090,"sku":"JP ABSA 001","price":201.88,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ABSA_001.png?v=1780816231"},{"product_id":"2-blinker-eliminatoren-jetprime-bmw-s1000rr-jp-es-036-a","title":"JetPrime Indicator Eliminators for BMW S1000RR \u0026 HP4 (2009-2020) – JP ES 036 A (Pair)","description":"\u003cp\u003eStrip the indicators from your BMW S1000RR or HP4 and keep the dashboard completely clean. The JetPrime JP ES 036 A indicator eliminators are precision-engineered electronic modules that fool the ECU into registering no fault, leaving the instrument cluster error-free the moment the indicators come off.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRemoves both front and rear indicators while suppressing the resulting ECU fault code\u003c\/li\u003e\n\u003cli\u003eKeeps the dashboard free of warning lights — no error messages after indicator removal\u003c\/li\u003e\n\u003cli\u003eDesigned and validated specifically for the BMW S1000RR and HP4 (2009–2020)\u003c\/li\u003e\n\u003cli\u003eSimple plug-and-play electronic solution — no ECU remapping required\u003c\/li\u003e\n\u003cli\u003eBuilt for track and race use, where a clean, lightweight setup is essential\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign, Finish and Heritage\u003c\/h2\u003e\u003cp\u003eJetPrime has built a strong reputation in the European racing accessory market by focusing on one thing: solutions that work cleanly, without compromise. The JP ES 036 A pair reflects that philosophy — compact, unobtrusive modules finished to a consistent standard that suits the S1000RR's precision engineering. Where many generic eliminator kits leave residual fault codes or require awkward resistor workarounds, JetPrime's dedicated design targets the S1000RR and HP4 electrical architecture directly, delivering a result that is as tidy electronically as it is visually.\u003c\/p\u003e\u003ch2\u003eTrack Use and Practicality\u003c\/h2\u003e\u003cp\u003eOn circuit, indicators are unnecessary weight and drag. Removing them is a standard preparation step for track-day riders and club racers alike. The challenge has always been the resulting dashboard fault — a persistent warning that can obscure other critical information. The JP ES 036 A eliminates that problem entirely, giving you a clean instrument display to focus on what matters during a session. The pair format means both indicator circuits are handled in a single kit, keeping the installation straightforward and the result consistent across the bike.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThese indicator eliminators fit the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBMW S1000RR — 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020\u003c\/li\u003e\n\u003cli\u003eBMW HP4 — 2009 to 2020 (same electrical architecture)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease verify your model year before ordering. This product is intended exclusively for track and race use and is not approved for use on public roads.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: JetPrime\u003c\/li\u003e\n\u003cli\u003ePart number: JP ES 036 A\u003c\/li\u003e\n\u003cli\u003eType: Indicator eliminators (electronic ECU deceivers)\u003c\/li\u003e\n\u003cli\u003eQuantity: 2 (pair)\u003c\/li\u003e\n\u003cli\u003eFitment: BMW S1000RR \/ HP4, 2009–2020\u003c\/li\u003e\n\u003cli\u003eFunction: Removes indicator fault codes from dashboard after indicator removal\u003c\/li\u003e\n\u003cli\u003eIntended use: Track and race use only — not road legal\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168851878154,"sku":"JP ES 036 A","price":31.06,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ES_036_A.png?v=1780817632"},{"product_id":"4-blinker-eliminatoren-jetprime-bmw-s1000rr-jp-es-036-b","title":"JetPrime Indicator Eliminators for BMW S1000RR \u0026 HP4 (2009-2020) – Set of 4 | JP ES 036 B","description":"\u003cp\u003eStripping indicators from your BMW S1000RR or HP4 for track use is a clean, straightforward job — provided the ECU never finds out. The JetPrime JP ES 036 B kit includes four electronic indicator eliminators that plug directly into the OEM harness, keeping the dashboard fault-free and the display reading exactly as it should after the indicators are removed.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRemoves all four indicators from the motorcycle without triggering any dashboard fault codes\u003c\/li\u003e\n\u003cli\u003eDeceives the ECU electronically so the instrument cluster shows a clean, error-free display\u003c\/li\u003e\n\u003cli\u003ePlug-and-play installation — no soldering, no wiring modifications required\u003c\/li\u003e\n\u003cli\u003eDeveloped and tested specifically for the BMW S1000RR (2009-2020) and HP4\u003c\/li\u003e\n\u003cli\u003eReliable, durable construction built to withstand the demands of regular track use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eClean Cockpit, Zero Faults\u003c\/h2\u003e\u003cp\u003eModern superbikes like the S1000RR monitor indicator circuits continuously. Pull an indicator without the correct load on the line and the dash lights up with errors that can interfere with electronics and distract from the job at hand on a fast circuit. JetPrime's JP ES 036 B eliminators solve this by presenting the correct electrical load to the control unit, so the bike sees four functioning indicators even when there are none. The result is a tidy, trackday-ready motorcycle with a spotless instrument display.\u003c\/p\u003e\u003ch2\u003eBuild Quality\u003c\/h2\u003e\u003cp\u003eJetPrime designs these eliminators specifically for BMW's S1000RR platform across the full 2009-2020 production run, including the HP4 variant. Each unit is engineered to the correct impedance and voltage characteristics for the OEM wiring, ensuring consistent performance over repeated trackday seasons without degradation in signal quality.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis kit fits the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBMW S1000RR — model years 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020\u003c\/li\u003e\n\u003cli\u003eBMW HP4 — all years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eJetPrime\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eJP ES 036 B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003e4 indicator eliminators per kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eBMW S1000RR (2009-2020), BMW HP4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eRemoves indicators and suppresses dashboard fault codes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003ePlug-and-play, OEM connector compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntended use\u003c\/td\u003e\n\u003ctd\u003eRace \/ track use only — not road-legal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003eNotice: This product is designed exclusively for motorsport and race track use. It is not approved for use on public roads.\u003c\/p\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168851910922,"sku":"JP ES 036 B","price":62.12,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_ES_036_B.png?v=1780817633"},{"product_id":"jetprime-jp-ex-001-b","title":"JetPrime Exhaust Valve Eliminator for BMW S1000RR (2009-2018) – JP EX 001 B","description":"\u003cp\u003eFitting an aftermarket exhaust to your BMW S1000RR (2009-2018) should not mean putting up with a persistent dashboard fault code or hunting for somewhere to mount an unwanted servo motor. The JetPrime Exhaust Valve Eliminator JP EX 001 B solves both problems at once: a straightforward plug-in unit that tells the ECU the valve circuit is intact, so the warning light stays off and you can get on with riding.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEliminates the exhaust valve servo motor from the system, removing unnecessary weight and complexity when fitting aftermarket exhausts\u003c\/li\u003e\n\u003cli\u003eSuppresses the fault code that the dashboard would otherwise display once the original valve assembly is removed\u003c\/li\u003e\n\u003cli\u003eDesigned and tested specifically for the BMW S1000RR across the full 2009-2018 model range, ensuring a precise, reliable fit\u003c\/li\u003e\n\u003cli\u003eSimple installation — plugs directly into the existing wiring loom with no cutting or splicing required\u003c\/li\u003e\n\u003cli\u003eCompact and discreet, with no need to find mounting space for a bulky servo that aftermarket systems never accommodate\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEveryday Usability and Practical Value\u003c\/h2\u003e\u003cp\u003eFor any S1000RR owner swapping to a slip-on silencer or full aftermarket exhaust system, this eliminator makes the conversion genuinely clean. Without it, removing the stock exhaust valve triggers a fault that can prevent the bike from running correctly and causes a warning light that is difficult to ignore on a daily basis. The JP EX 001 B removes that concern entirely: the ECU reads a normal signal, the instrument cluster stays clear, and the bike behaves exactly as it should. The weight saving from removing the servo motor and valve mechanism is a welcome bonus, particularly for track-day riders who want to trim every unnecessary gram.\u003c\/p\u003e\u003ch2\u003eBuild Quality and Reliability\u003c\/h2\u003e\u003cp\u003eJetPrime developed the JP EX 001 B exclusively for the S1000RR platform, which means the connector pinout, signal characteristics and software mapping all match the BMW ECU precisely. The unit is built to withstand the heat and vibration environment of a high-performance inline-four, delivering consistent, long-term reliability whether the bike sees weekend track days or regular road use.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis exhaust valve eliminator fits the following motorcycle:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBMW S1000RR — model years 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003ePlease note: this product is intended for motorsport and closed-circuit use only. It is not approved for use on public roads.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: JetPrime\u003c\/li\u003e\n\u003cli\u003ePart number: JP EX 001 B\u003c\/li\u003e\n\u003cli\u003eType: Exhaust valve eliminator \/ servo motor eliminator\u003c\/li\u003e\n\u003cli\u003eFitment: BMW S1000RR (2009-2018)\u003c\/li\u003e\n\u003cli\u003eFunction: Removes exhaust valve servo motor and suppresses ECU fault codes\u003c\/li\u003e\n\u003cli\u003eInstallation: Plug-and-play, connects to existing wiring loom\u003c\/li\u003e\n\u003cli\u003eIntended use: Motorsport \/ closed-circuit only\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JetPrime","offers":[{"title":"Default Title","offer_id":53168852074762,"sku":"JP EX 001 B","price":113.88,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/JP_EX_001_B.png?v=1780817645"}],"url":"https:\/\/inter-pace.com\/collections\/eliminators.oembed","provider":"Inter-Pace","version":"1.0","type":"link"}