{"product_id":"ohlins-fgk-219","title":"Öhlins NIX 30 Cartridge Kit FGK 219 for Ducati Panigale V4 S (2018–2021)","description":"\u003cp\u003eThe Öhlins NIX 30 Cartridge Kit FGK 219 is a precision-engineered fork upgrade developed specifically for the Ducati Panigale V4 S, V4 S Corse and V4 Speciale — a product that carries the full weight of Öhlins' Scandinavian racing heritage in every machined component. Where the standard fork leaves room for improvement, this 30 mm cartridge system transforms the front end into something genuinely capable of matching the V4's extraordinary engine performance, whether on a demanding road or a race circuit.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e30 mm cartridge system delivering a substantial improvement in damping consistency and front-end stability over the stock fork internals\u003c\/li\u003e\n\u003cli\u003eCompression damping and compression adjuster housed in the left fork leg for intuitive, accessible setup\u003c\/li\u003e\n\u003cli\u003eRebound damping and rebound adjuster integrated into the right fork leg, keeping each circuit cleanly separated\u003c\/li\u003e\n\u003cli\u003eAll adjustments — including spring preload — made directly at the fork cap, no special tooling required for trackside tuning\u003c\/li\u003e\n\u003cli\u003eGerman ABE type approval included for all three compatible models, making road registration straightforward\u003c\/li\u003e\n\u003cli\u003eDesigned and manufactured to Öhlins' exacting standards, befitting the premium finish and engineering that defines the brand\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign, Finish and Heritage\u003c\/h2\u003e\u003cp\u003eÖhlins has been supplying championship-winning suspension to MotoGP and World Superbike paddocks for decades, and the NIX 30 cartridge carries that lineage directly into the hands of road and track riders. The kit's architecture reflects considered Swedish engineering: separate compression and rebound circuits in dedicated legs eliminate cross-interference between damping functions, giving the rider a cleaner, more predictable response to adjustment. Every component is finished to the standard expected of a product that will sit inside a Panigale — precise, purposeful and built to last.\u003c\/p\u003e\u003ch2\u003ePerformance on Road and Track\u003c\/h2\u003e\u003cp\u003eFitting the FGK 219 addresses one of the most effective ways to unlock the Panigale V4 S's true handling potential. The 120 mm travel cartridge system increases rigidity and damping precision through fast direction changes and hard braking events, where the stock setup can feel vague under extreme load. For track use, the fine-resolution adjusters at the fork caps allow rapid spring preload, compression and rebound changes between sessions without removing the front wheel or disassembling the leg. On the road, the improvement in small-bump compliance and mid-corner stability makes long, committed rides significantly more rewarding.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis cartridge kit is a direct fitment for the following models, each with German ABE type approval included:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale V4 S (2018–2021) — with ABE (Germany)\u003c\/li\u003e\n\u003cli\u003eDucati Panigale V4 S Corse (2019–2020) — with ABE (Germany)\u003c\/li\u003e\n\u003cli\u003eDucati Panigale V4 Speciale (2018–2019) — with ABE (Germany)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSprings are not included and must be ordered separately from the Öhlins 08790 series. Installation by an authorised Öhlins Service Centre is recommended for optimal results; a fitting guide is supplied with the kit.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart number: FGK 219\u003c\/li\u003e\n\u003cli\u003eCartridge diameter: 30 mm\u003c\/li\u003e\n\u003cli\u003eFork travel: 120 mm\u003c\/li\u003e\n\u003cli\u003eCompatible springs: Öhlins 08790 series (sold separately)\u003c\/li\u003e\n\u003cli\u003eCompression adjuster: left fork leg\u003c\/li\u003e\n\u003cli\u003eRebound adjuster: right fork leg\u003c\/li\u003e\n\u003cli\u003ePreload adjustment: fork cap\u003c\/li\u003e\n\u003cli\u003eType approval: ABE (Germany)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53168695247114,"sku":"FGK 219","price":1532.1,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/NIXFGK_c0b9fe04-3cdf-4cd1-9e0e-50219f7ef7eb.png?v=1780811219","url":"https:\/\/inter-pace.com\/ar\/products\/ohlins-fgk-219","provider":"Inter-Pace","version":"1.0","type":"link"}