{"title":"Swingarms","description":null,"products":[{"product_id":"bobbins-rs660","title":"LighTech Bobbins Swingarm Spools M6 for Aprilia RS 660 (2020-2026) SCV003","description":"\u003cp\u003eEngineered in Italy by LighTech, the SCV003 swingarm spools give your Aprilia RS 660 a safe, rock-solid lifting point for paddock stand use — while doubling as anodised swingarm protection if the bike ever goes down. These are the bobbins to fit before your first trackday or garage service session.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eThreads directly into the existing M6 swingarm bosses — no drilling, no modification required, no risk of a poorly secured stand\u003c\/li\u003e\n\u003cli\u003eCNC-machined from aluminium for a precision fit that holds the paddock stand fork securely every time the rear wheel leaves the ground\u003c\/li\u003e\n\u003cli\u003eProvides meaningful swingarm protection in a tip-over, reducing the risk of costly swingarm damage\u003c\/li\u003e\n\u003cli\u003eAvailable in five anodised colours — black (SCV003NER), gold (SCV003ORO), red (SCV003ROS), silver (SCV003SIL) and blue (SCV003COB) — to complement your RS 660's livery\u003c\/li\u003e\n\u003cli\u003eSupplied as a matched pair (left and right) for complete, symmetrical installation\u003c\/li\u003e\n\u003cli\u003eMade in Italy to LighTech's exacting motorsport standards\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePrecision Fit, Racing Provenance\u003c\/h2\u003e\u003cp\u003eLighTech designs these spools for riders who refuse to compromise on workshop safety or garage aesthetics. The M6 thread engagement means the bobbins seat fully into the swingarm without play, so the paddock stand fork locates cleanly and the bike rises in a straight, controlled line. The CNC-machined aluminium body keeps weight to an absolute minimum while retaining the structural integrity needed to bear the full weight of the motorcycle during tyre changes, chain maintenance or suspension adjustment.\u003c\/p\u003e\u003ch2\u003eSwingarm Protection You Can See\u003c\/h2\u003e\u003cp\u003eBeyond their primary lifting function, the SCV003 spools extend outward from the swingarm sufficiently to contact the ground before the swingarm itself in a low-speed tip-over. The hard-anodised finish is durable enough to absorb light abrasion without flaking, and the colour choice lets you coordinate them with brake lever adjusters, bar ends or other LighTech accessories for a cohesive trackday look.\u003c\/p\u003e\u003ch2\u003eImportant Safety Note\u003c\/h2\u003e\u003cp\u003eThese spools are not compatible with single-sided swingarm motorcycles or with any swingarm that does not have pre-existing threaded M6 mounting holes. Always verify the presence of the correct threaded bosses before ordering. Confirm the paddock stand fork diameter matches the spool before lifting the motorcycle.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAprilia RS 660 — model years 2020, 2021, 2022, 2023, 2024, 2025, 2026\u003c\/li\u003e\n\u003cli\u003eRequires existing M6 threaded holes in the swingarm (standard on the above models)\u003c\/li\u003e\n\u003cli\u003eNot suitable for single-sided swingarm configurations\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003cth\u003eColour\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSCV003NER\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSCV003ORO\u003c\/td\u003e\n\u003ctd\u003eGold\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSCV003ROS\u003c\/td\u003e\n\u003ctd\u003eRed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSCV003SIL\u003c\/td\u003e\n\u003ctd\u003eSilver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSCV003COB\u003c\/td\u003e\n\u003ctd\u003eBlue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cul\u003e\n\u003cli\u003eThread size: M6\u003c\/li\u003e\n\u003cli\u003eMaterial: CNC-machined aluminium\u003c\/li\u003e\n\u003cli\u003eSurface finish: anodised\u003c\/li\u003e\n\u003cli\u003eMount position: rear swingarm\u003c\/li\u003e\n\u003cli\u003eCompatible stand type: paddock stand with fork\/bobbin receiver\u003c\/li\u003e\n\u003cli\u003eScope of delivery: 1 pair (left and right)\u003c\/li\u003e\n\u003cli\u003eOrigin: Made in Italy\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"Red","offer_id":53167040233738,"sku":"SCV003ROS","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Gold","offer_id":53167040266506,"sku":"SCV003ORO","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Blue","offer_id":53167040299274,"sku":"SCV003COB","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Silver","offer_id":53167040332042,"sku":"SCV003SIL","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Black","offer_id":53167040364810,"sku":"SCV003NER","price":24.63,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/SCV003NER.png?v=1780788210"},{"product_id":"schwingenachsmutter-honda-cbr-600-rr-07-16-lightech-d004","title":"LighTech Swingarm Axle Nut Honda CBR 600 RR (2007–2016) D004","description":"\u003cp\u003eFew components on a track-focused Honda CBR 600 RR reveal a builder's attention to detail quite like the swingarm axle nut. LighTech's D004 replaces the factory steel item with a piece machined from Ergal 7075 aluminium — the same aerospace-grade alloy trusted in Formula racing for its exceptional strength-to-weight ratio — then hard anodised in your choice of five race-inspired colours. The result is a nut that earns its place on both the circuit and the road, carrying the aesthetics and engineering heritage you'd expect from one of Italy's most respected chassis accessory specialists.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eErgal 7075 aluminium construction — aerospace-grade alloy delivering extreme rigidity at a fraction of the weight of steel\u003c\/li\u003e\n\u003cli\u003eCNC precision machined for an exact, rattle-free fit on Honda CBR 600 RR swingarms\u003c\/li\u003e\n\u003cli\u003eHard anodised finish for lasting corrosion resistance and the signature LighTech racing look\u003c\/li\u003e\n\u003cli\u003eAvailable in five anodised colours — black (D004NER), gold (D004ORO), red (D004ROS), silver (D004SIL) and cobalt (D004COB) — so the nut can be matched to your livery\u003c\/li\u003e\n\u003cli\u003eThread M18x1.5, outer diameter 29 mm, hex 22 mm, height 14 mm — maximum tightening torque 120 Nm\u003c\/li\u003e\n\u003cli\u003eEqually suited to trackday use and daily road riding\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign, Finish and Heritage\u003c\/h2\u003e\u003cp\u003eLighTech has built its reputation over decades supplying CNC-machined aluminium accessories to racing teams and serious road riders across Europe. Every D004 swingarm axle nut is turned and milled in-house to tolerances that ensure the nut sits flush and true, eliminating the micro-movement that can develop with mass-produced steel hardware over time. The hard anodising process penetrates the surface of the Ergal rather than sitting on top of it, so the colour holds through seasons of use without flaking or fading — whether the bike lives in a heated garage or endures a full racing calendar.\u003c\/p\u003e\u003ch2\u003ePerformance and Practicality\u003c\/h2\u003e\u003cp\u003eReplacing a steel axle nut with an Ergal 7075 item removes meaningful unsprung mass from the rear of the chassis — small in isolation, but consistent with a broader philosophy of saving weight wherever it can be found. The M18x1.5 thread and 22 mm hex size mean a standard swingarm tool still works; nothing proprietary is required for routine maintenance. The 120 Nm maximum tightening torque is fully consistent with Honda's own specification for this chassis, so there is no compromise in structural integrity.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eHonda CBR 600 RR, model years 2007 to 2016\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eLighTech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eD004\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eErgal 7075 aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread\u003c\/td\u003e\n\u003ctd\u003eM18x1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter diameter\u003c\/td\u003e\n\u003ctd\u003e29 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e14 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHex diameter\u003c\/td\u003e\n\u003ctd\u003e22 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum tightening torque\u003c\/td\u003e\n\u003ctd\u003e120 Nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eHard anodised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eHonda CBR 600 RR (2007–2016)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"LighTech","offers":[{"title":"Black","offer_id":53167135523082,"sku":"D004NER","price":23.67,"currency_code":"EUR","in_stock":false},{"title":"Blue","offer_id":53167135555850,"sku":"D004COB","price":23.67,"currency_code":"EUR","in_stock":false},{"title":"Red","offer_id":53167135588618,"sku":"D004ROS","price":23.67,"currency_code":"EUR","in_stock":false},{"title":"Gold","offer_id":53167135621386,"sku":"D004ORO","price":23.67,"currency_code":"EUR","in_stock":false},{"title":"Silver","offer_id":53167135654154,"sku":"D004SIL","price":23.67,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/D004NER.png?v=1780791061"},{"product_id":"schwingenachsmutter-bmw-s1000rr-lightech-d004","title":"LighTech Swingarm Axle Nut BMW S1000RR K46 K67 (2009–2026) – Ergal 7075 Aluminium D004","description":"\u003cp\u003eWhen every gram and every detail counts, the LighTech swingarm axle nut for the BMW S1000RR K46 and K67 is the upgrade that quietly earns its place on both road and track. Machined from aerospace-grade Ergal 7075 aluminium and available in five anodised finishes, it delivers a factory-precise fit that inspires confidence mile after mile — and looks exceptional doing it.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eErgal 7075 aluminium construction — the same alloy trusted in aerospace for an outstanding strength-to-weight ratio\u003c\/li\u003e\n\u003cli\u003eCNC-precision machined to exact tolerances, ensuring a flush, rattle-free fit that stays secure under hard acceleration and braking\u003c\/li\u003e\n\u003cli\u003eHard anodised surface finish provides reliable corrosion resistance and a durable, race-ready appearance\u003c\/li\u003e\n\u003cli\u003eRated to a maximum tightening torque of 120 Nm, meeting the demands of sustained track use\u003c\/li\u003e\n\u003cli\u003eAvailable in black, blue, red, gold and silver to coordinate with your S1000RR's livery\u003c\/li\u003e\n\u003cli\u003eDirect replacement for both K46 (2009–2018) and K67 (2019–2026) chassis generations\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePrecision Engineering for the Long Haul\u003c\/h2\u003e\u003cp\u003eLighTech has built its reputation by applying motorsport manufacturing standards to every component it produces, and the D004 swingarm axle nut is no exception. The M18x1.5 thread is cut to micron-level precision so the nut seats evenly and torques down cleanly without any tendency to gall or seize — a detail that makes routine swingarm removal and reinstallation a far more pleasant experience across the lifetime of the bike. The 29 mm diameter and 14 mm height profile are dimensionally identical to the OEM specification, so there is no fettling, no shimming and no guesswork involved at installation.\u003c\/p\u003e\u003ch2\u003eRoad and Track Performance\u003c\/h2\u003e\u003cp\u003eThe appeal of the D004 goes beyond aesthetics. By replacing a steel factory nut with an Ergal 7075 unit, you strip a meaningful amount of unsprung rotational mass from the rear end — a change that subtly sharpens the S1000RR's already razor-edged handling response. The anodised finish is robust enough to survive the repeated heat cycles, road grime and chain lubricant exposure that any working sportsbike encounters, making this a lasting upgrade rather than a cosmetic one that needs babying.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBMW S1000RR K46 (2009–2018)\u003c\/li\u003e\n\u003cli\u003eBMW S1000RR K67 (2019–2026)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eD004\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eErgal 7075 aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread\u003c\/td\u003e\n\u003ctd\u003eM18x1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e29 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e14 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHex diameter\u003c\/td\u003e\n\u003ctd\u003e22 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum tightening torque\u003c\/td\u003e\n\u003ctd\u003e120 Nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurface finish\u003c\/td\u003e\n\u003ctd\u003eHard anodised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eBMW S1000RR K46 (2009–2018), K67 (2019–2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"LighTech","offers":[{"title":"Black","offer_id":53167135686922,"sku":"D004NER","price":23.67,"currency_code":"EUR","in_stock":false},{"title":"Blue","offer_id":53167135719690,"sku":"D004COB","price":23.67,"currency_code":"EUR","in_stock":false},{"title":"Red","offer_id":53167135752458,"sku":"D004ROS","price":23.67,"currency_code":"EUR","in_stock":false},{"title":"Gold","offer_id":53167135785226,"sku":"D004ORO","price":23.67,"currency_code":"EUR","in_stock":false},{"title":"Silver","offer_id":53167135817994,"sku":"D004SIL","price":23.67,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/D004NER_13e89512-6aef-43bc-bd52-bb614d1e9a4d.png?v=1780791062"},{"product_id":"schwingenachsmutter-aprilia-rsv4-factory-r-rf-rr-09-26-lightech-d010","title":"LighTech Swingarm Axle Nut Aprilia RSV4 \/ RSV4 1100 Factory \/ R \/ RR \/ RF (2009–2026) D010","description":"\u003cp\u003eWhen the integrity of your swingarm axle fastening matters most, the LighTech D010 swingarm axle nut delivers precision-machined security engineered to aerospace standards. Crafted from Ergal 7075 aluminium — the same alloy trusted in aviation structures — and finished with an anodised surface that resists corrosion, this nut is CNC-machined to exact tolerances for a fitment that is both mechanically sound and visually striking on any Aprilia RSV4 variant from 2009 to 2026.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eErgal 7075 aluminium construction: exceptional strength-to-weight ratio derived from aerospace-grade alloy, replacing heavier OEM hardware without compromising structural integrity\u003c\/li\u003e\n\u003cli\u003eCNC-machined to precise tolerances, ensuring consistent thread engagement and a secure, rattle-free fit on the swingarm axle\u003c\/li\u003e\n\u003cli\u003eHard anodised surface treatment provides lasting corrosion resistance and preserves the racing aesthetic over years of road and track use\u003c\/li\u003e\n\u003cli\u003eM20x1.5 thread with a 125 Nm maximum tightening torque rating — confidence-inspiring figures that confirm this nut is engineered for serious use\u003c\/li\u003e\n\u003cli\u003eAvailable in five anodised colours to complement your RSV4's livery, each identified by its own part-number suffix for straightforward ordering\u003c\/li\u003e\n\u003cli\u003eApproved for both road and circuit use, making it a genuinely versatile upgrade wherever you ride\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEngineering \u0026amp; Construction\u003c\/h2\u003e\u003cp\u003eLighTech manufactures the D010 from Ergal 7075, a high-strength aluminium alloy that combines low mass with the structural rigidity demanded by competition environments. The CNC machining process eliminates the dimensional inconsistencies found in cast alternatives, producing a nut with a 34.8 mm outer diameter, 15 mm height and a 27 mm hex that accepts a standard tool without risk of rounding. The M20x1.5 fine-pitch thread ensures smooth engagement and resists loosening under vibration, while the specified 125 Nm maximum torque rating provides a clear, safe tightening reference for workshop and trackside installation alike.\u003c\/p\u003e\u003ch2\u003eFinish \u0026amp; Colour Options\u003c\/h2\u003e\u003cp\u003eEach D010 nut is individually anodised, sealing the alloy surface against oxidation and giving each colour a depth that painted finishes cannot match. The following colour variants are available, each with its own part number for accurate identification:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBlack — D010NER\u003c\/li\u003e\n\u003cli\u003eBlue — D010COB\u003c\/li\u003e\n\u003cli\u003eRed — D010ROS\u003c\/li\u003e\n\u003cli\u003eGold — D010ORO\u003c\/li\u003e\n\u003cli\u003eSilver — D010SIL\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis swingarm axle nut is a direct, application-specific replacement designed exclusively for the following Aprilia models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAprilia RSV4 Factory — 2009 to 2026\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 R — 2009 to 2026\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 RR — 2009 to 2026\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 RF — 2009 to 2026\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 1100 — 2009 to 2026\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart number: D010\u003c\/li\u003e\n\u003cli\u003eMaterial: Ergal 7075 aluminium\u003c\/li\u003e\n\u003cli\u003eThread: M20x1.5\u003c\/li\u003e\n\u003cli\u003eOuter diameter: 34.8 mm\u003c\/li\u003e\n\u003cli\u003eHeight: 15 mm\u003c\/li\u003e\n\u003cli\u003eHex diameter: 27 mm\u003c\/li\u003e\n\u003cli\u003eMaximum tightening torque: 125 Nm\u003c\/li\u003e\n\u003cli\u003eSurface finish: anodised\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"Black","offer_id":53167136342282,"sku":"D010NER","price":22.92,"currency_code":"EUR","in_stock":false},{"title":"Blue","offer_id":53167136375050,"sku":"D010COB","price":22.92,"currency_code":"EUR","in_stock":false},{"title":"Red","offer_id":53167136407818,"sku":"D010ROS","price":22.92,"currency_code":"EUR","in_stock":false},{"title":"Gold","offer_id":53167136440586,"sku":"D010ORO","price":22.92,"currency_code":"EUR","in_stock":false},{"title":"Silver","offer_id":53167136473354,"sku":"D010SIL","price":22.92,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/D010NER.png?v=1780791063"},{"product_id":"schwingenachsmutter-honda-lightech-d018","title":"LighTech Swingarm Axle Nut Honda CBR 1000 RR (2008–2016) D018","description":"\u003cp\u003eWhen every gram and every tenth of a second counts on track, the LighTech swingarm axle nut for the Honda CBR 1000 RR (2008–2016) delivers exactly the kind of precision engineering that separates race-prepared machinery from the rest. Machined from Ergal 7075 aluminium — the aerospace-grade alloy favoured in motorsport for its exceptional strength-to-weight ratio — this is a direct, no-compromise upgrade for riders who demand race-spec componentry on every corner of their CBR.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eErgal 7075 aluminium construction: aerospace-grade alloy offering maximum structural integrity at minimum weight\u003c\/li\u003e\n\u003cli\u003eCNC-machined to tight tolerances for a precise, rattle-free fit and consistent clamping force\u003c\/li\u003e\n\u003cli\u003eHard anodised finish resists corrosion, track grime and abrasion while delivering an unmistakably purposeful look\u003c\/li\u003e\n\u003cli\u003eRated to a maximum tightening torque of 130 Nm — engineered for the demands of sustained track use\u003c\/li\u003e\n\u003cli\u003eAvailable in five anodised colours with individual part numbers, making identification and team colour-coding straightforward\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eRace Engineering in a Single Component\u003c\/h2\u003e\u003cp\u003eLighTech has built its reputation by applying the material science and manufacturing discipline of professional racing to parts that are often overlooked. The swingarm axle nut is a case in point: the standard steel item carries unnecessary mass and offers no adjustment in appearance. The D018 replaces it with a component that has been CNC-turned from a solid billet of Ergal 7075, the same aluminium alloy series used in aircraft structures and Formula 1 suspension components. The result is a part that is dramatically lighter than its steel counterpart without any reduction in the torque rating that matters at circuit speeds.\u003c\/p\u003e\u003cp\u003eThe thread specification — M22x1.5 — matches the Honda OEM fitment exactly, and the 32 mm hex diameter is sized for standard race toolkit spanners. The 130 Nm maximum tightening torque gives a clear, safe working limit for pit-lane tyre changes and wheel rebuilds. On track days and race weekends, small savings add up; fitting the D018 across your suspension hardware is the disciplined approach to shedding rotational and unsprung mass without touching the geometry your suspension setup depends on.\u003c\/p\u003e\u003ch2\u003eRoad-Legal Refinement, Race-Ready Attitude\u003c\/h2\u003e\u003cp\u003eThe D018 is equally at home on a road-going CBR 1000 RR used for weekend blasts. The hard anodised surface is durable enough to withstand road contamination, brake dust and the heat cycles that build around a rear axle over thousands of kilometres. Choose a colour that matches your bike's livery — black for stealth, gold for a classic race look, red to accent Honda's factory palette, silver for a clean OEM-plus finish, or cobalt blue for a standout contrast.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eHonda CBR 1000 RR (2008–2016)\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eLighTech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eD018\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eErgal 7075 aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturing process\u003c\/td\u003e\n\u003ctd\u003eCNC-machined\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurface finish\u003c\/td\u003e\n\u003ctd\u003eHard anodised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread\u003c\/td\u003e\n\u003ctd\u003eM22x1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter diameter\u003c\/td\u003e\n\u003ctd\u003e38.4 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e19.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHex diameter\u003c\/td\u003e\n\u003ctd\u003e32 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum tightening torque\u003c\/td\u003e\n\u003ctd\u003e130 Nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eHonda CBR 1000 RR (2008–2016)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"LighTech","offers":[{"title":"Black","offer_id":53167136899338,"sku":"D018NER","price":25.49,"currency_code":"EUR","in_stock":false},{"title":"Blue","offer_id":53167136932106,"sku":"D018COB","price":25.49,"currency_code":"EUR","in_stock":false},{"title":"Red","offer_id":53167136964874,"sku":"D018ROS","price":25.49,"currency_code":"EUR","in_stock":false},{"title":"Gold","offer_id":53167136997642,"sku":"D018ORO","price":25.49,"currency_code":"EUR","in_stock":false},{"title":"Silver","offer_id":53167137030410,"sku":"D018SIL","price":25.49,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/D018NER_e1d74be1-c023-4572-8984-e64ea443cb72.png?v=1780791069"},{"product_id":"schwingenachsmutter-yamaha-yzf-r6-06-26-lightech-d018","title":"LighTech Swingarm Axle Nut Yamaha YZF-R6 RJ11, RJ15, RJ27 (2006-2026) D018","description":"\u003cp\u003eWhen every gram and every tenth of a second counts on track, the LighTech swingarm axle nut for the Yamaha YZF-R6 RJ11, RJ15, RJ27 (2006–2026) delivers exactly where factory hardware falls short. CNC-machined from aerospace-grade Ergal 7075 aluminium and finished with a hard anodised surface, this is a direct-fit racing upgrade engineered to perform under the sustained stress of a full race weekend — not just a cosmetic flourish.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eErgal 7075 aluminium construction — the same aerospace alloy trusted in motorsport applications for its exceptional strength-to-weight ratio\u003c\/li\u003e\n\u003cli\u003eCNC-machined to exacting tolerances for a perfect, rattle-free fit on the YZF-R6 swingarm axle\u003c\/li\u003e\n\u003cli\u003eHard anodised surface provides durable corrosion resistance and a purposeful racing aesthetic in five colour options\u003c\/li\u003e\n\u003cli\u003eThread specification M22x1.5 with a maximum torque rating of 130 Nm — fully compatible with standard and race-spec torque procedures\u003c\/li\u003e\n\u003cli\u003eSaves weight over the OEM steel nut — a meaningful gain when combined with other LighTech lightweight chassis components\u003c\/li\u003e\n\u003cli\u003eAvailable in black (D018NER), gold (D018ORO), red (D018ROS), silver (D018SIL) and cobalt (D018COB) to coordinate with your livery\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eRace-Bred Construction\u003c\/h2\u003e\u003cp\u003eLighTech developed this swingarm axle nut as part of their broader programme of CNC-machined chassis accessories, targeting the trackday and club-racing market where reducing unsprung and rotating mass has a measurable effect on handling response. The Ergal 7075 alloy is heat-treated to maximise tensile strength while keeping the component as light as the design allows. The anodised finish is not purely decorative — it adds a hard surface layer that resists the abrasion and chemical attack that comes with regular swingarm removal during tyre changes in a pit environment.\u003c\/p\u003e\u003ch2\u003ePrecision Engineering, Zero Compromise\u003c\/h2\u003e\u003cp\u003eThe nut is machined to a thread pitch of M22x1.5 with an outer diameter of 38.4 mm, a height of 19.5 mm and a hex diameter of 32 mm. The 130 Nm maximum torque specification means it can be installed to OEM-recommended settings without reservation, and removed cleanly race after race without the thread degradation that plagues softer alloy alternatives. For serious R6 campaigners running the same chassis through multiple seasons, that long-term durability matters as much as the initial weight saving.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eYamaha YZF-R6 RJ11 (2006–2007)\u003c\/li\u003e\n\u003cli\u003eYamaha YZF-R6 RJ15 (2008–2016)\u003c\/li\u003e\n\u003cli\u003eYamaha YZF-R6 RJ27 (2017–2026)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePart number: D018. Always verify fitment against your frame number before ordering if your model year falls at a generation boundary.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eLighTech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eD018\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eErgal 7075 aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread\u003c\/td\u003e\n\u003ctd\u003eM22x1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Diameter\u003c\/td\u003e\n\u003ctd\u003e38.4 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e19.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHex Diameter\u003c\/td\u003e\n\u003ctd\u003e32 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Torque\u003c\/td\u003e\n\u003ctd\u003e130 Nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurface Finish\u003c\/td\u003e\n\u003ctd\u003eHard anodised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"LighTech","offers":[{"title":"Black","offer_id":53167138636042,"sku":"D018NER","price":25.49,"currency_code":"EUR","in_stock":false},{"title":"Blue","offer_id":53167138668810,"sku":"D018COB","price":25.49,"currency_code":"EUR","in_stock":false},{"title":"Red","offer_id":53167138701578,"sku":"D018ROS","price":25.49,"currency_code":"EUR","in_stock":false},{"title":"Gold","offer_id":53167138734346,"sku":"D018ORO","price":25.49,"currency_code":"EUR","in_stock":false},{"title":"Silver","offer_id":53167138767114,"sku":"D018SIL","price":25.49,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/D018NER_b2c284f4-1843-4b1e-b4f8-559d1df13420.png?v=1780791148"},{"product_id":"schwingenachsmutter-suzuki-gsx-r-600-750-06-17-lightech-d010","title":"LighTech Swingarm Axle Nut for Suzuki GSX-R 600\/750 (2006–2017) – Ergal 7075 Aluminium D010","description":"\u003cp\u003eWhen every gram and every connection point matters, the LighTech D010 swingarm axle nut sets a standard that OEM hardware cannot match. Manufactured from aerospace-grade Ergal 7075 aluminium with a rated maximum torque capacity of 125 Nm, this precision component is engineered to meet the demanding safety margins of both circuit and road use — giving GSX-R 600 and GSX-R 750 riders genuine confidence in a part they will never see but always rely on.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMachined from Ergal 7075 aluminium: one of the highest-strength aluminium alloys available, chosen for its exceptional strength-to-weight ratio and structural integrity under repeated high-torque loading\u003c\/li\u003e\n\u003cli\u003eRated to a maximum tightening torque of 125 Nm, ensuring the axle nut meets the safety-critical clamping requirements of the swingarm assembly\u003c\/li\u003e\n\u003cli\u003eCNC-precision machined for exact dimensional conformance — M20x1.5 thread, 34.8 mm diameter, 15 mm height, 27 mm hex across-flats — guaranteeing a perfect, wobble-free fit every time\u003c\/li\u003e\n\u003cli\u003eHard anodised surface treatment resists corrosion, road contamination and track-day grime while maintaining a clean racing aesthetic over the long term\u003c\/li\u003e\n\u003cli\u003eDirect OEM-pattern replacement: no modification, no adapters, no compromise to the original safety envelope of the swingarm pivot\u003c\/li\u003e\n\u003cli\u003eAvailable in five anodised colours — black, blue, red, gold and silver — so your chosen finish complements the bike's livery without sacrificing an ounce of function\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePrecision Engineering for Track and Road\u003c\/h2\u003e\u003cp\u003eLighTech developed the D010 specifically around the swingarm axle geometry of the Suzuki GSX-R 600 and GSX-R 750 from the 2006 model year through to 2017. The M20x1.5 fine thread pitch is retained from the OEM specification so torque is distributed evenly across the thread engagement, reducing the risk of galling or thread damage on removal. The 27 mm hex diameter is compatible with standard pit-lane tooling, and the compact 15 mm stack height keeps the nut neatly within the swingarm recess. Because the nut is machined rather than cast, wall consistency is uniform throughout — there are no voids or porosity issues that can compromise clamping force under load.\u003c\/p\u003e\u003ch2\u003eSwingarm Safety and Clamping Integrity\u003c\/h2\u003e\u003cp\u003eThe swingarm axle nut is one of the most safety-critical fasteners on any sportsbike. It retains the rear axle under the full braking, acceleration and cornering forces generated by a litre-class machine. LighTech's decision to specify Ergal 7075 — the same alloy family used in aerospace structural components — rather than standard 6061 aluminium reflects an understanding of real-world fatigue behaviour. Combined with the 125 Nm torque rating and a corrosion-resistant anodised finish that protects thread integrity over time, the D010 delivers a safety margin that riders and mechanics can trust in the pits or on the road.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSuzuki GSX-R 600 (2006–2017)\u003c\/li\u003e\n\u003cli\u003eSuzuki GSX-R 750 (2006–2017)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eD010\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread\u003c\/td\u003e\n\u003ctd\u003eM20x1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter diameter\u003c\/td\u003e\n\u003ctd\u003e34.8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e15 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHex diameter\u003c\/td\u003e\n\u003ctd\u003e27 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum tightening torque\u003c\/td\u003e\n\u003ctd\u003e125 Nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eErgal 7075 aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurface finish\u003c\/td\u003e\n\u003ctd\u003eHard anodised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour options\u003c\/td\u003e\n\u003ctd\u003eBlack (D010NER), Blue (D010COB), Red (D010ROS), Gold (D010ORO), Silver (D010SIL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"LighTech","offers":[{"title":"Black","offer_id":53167138996490,"sku":"D010NER","price":22.92,"currency_code":"EUR","in_stock":false},{"title":"Blue","offer_id":53167139029258,"sku":"D010COB","price":22.92,"currency_code":"EUR","in_stock":false},{"title":"Red","offer_id":53167139062026,"sku":"D010ROS","price":22.92,"currency_code":"EUR","in_stock":false},{"title":"Gold","offer_id":53167139094794,"sku":"D010ORO","price":22.92,"currency_code":"EUR","in_stock":false},{"title":"Silver","offer_id":53167139127562,"sku":"D010SIL","price":22.92,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/D010NER_278a8446-9a19-43a0-950c-238c6b95a6d1.png?v=1780791150"},{"product_id":"aluminium-racingschwinge-kawasaki-zx-10-r","title":"Febur Racing Aluminium Swingarm for Kawasaki ZX-10 R\/RR (2016-2020) FE1459 + FE716","description":"\u003cp\u003eBorn from a direct collaboration with the World Superbike Championship, the Febur FE1459 + FE716 racing swingarm redefines what a bolt-on aluminium chassis component can deliver for the Kawasaki ZX-10 R and ZX-10 RR. Weighing just 6.7 kg in pure aluminium construction, it marries WSBK-proven geometry with the kind of finish and heritage that distinguishes a genuine race department part from an aftermarket approximation.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCo-developed with WSBK factory teams, ensuring the geometry and stiffness balance meet the extreme demands of professional circuit racing.\u003c\/li\u003e\n\u003cli\u003eFull 100% aluminium construction at a total weight of just 6.7 kg, reducing unsprung and overall mass for sharper turn-in and improved high-speed stability.\u003c\/li\u003e\n\u003cli\u003eSupplied as a complete, ready-to-fit set — chain tensioner sliders, speed sensor bracket and brake caliper bracket all included from the outset.\u003c\/li\u003e\n\u003cli\u003eTwo rear axle configurations available: 25 mm pin for use with the original wheel, or 28 mm pin for dedicated racing wheels, each delivered with all appropriate hardware.\u003c\/li\u003e\n\u003cli\u003eTrusted by leading race teams worldwide, Febur's motorsport pedigree is built on decades of competition development and class wins across international championships.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign, Finish and Heritage\u003c\/h2\u003e\u003cp\u003eFebur has long been the name in Italian specialist swingarm fabrication, and the FE1459 + FE716 represents the pinnacle of that tradition. The profile is derived directly from the ZX-10 R WSBK programme, retaining the visual language of a works machine while being engineered to accept the original Kawasaki rear wheel via the 25 mm axle variant. The aluminium surface carries the restrained, purposeful aesthetic that defines genuine track hardware — no unnecessary cosmetic additions, just the clean lines of a component designed to function under race conditions at the limit.\u003c\/p\u003e\u003ch2\u003ePerformance and Construction\u003c\/h2\u003e\u003cp\u003eAt 6.7 kg the swingarm delivers a meaningful reduction in both sprung and unsprung mass compared to the factory unit, and because every kilogram removed from the swingarm has a disproportionate effect on chassis response, the gains translate directly into feedback and agility through fast changes of direction. The aluminium specification is not a compromise — it has been chosen and validated through WSBK testing to provide the torsional rigidity required at the power levels and corner speeds the ZX-10 RR generates.\u003c\/p\u003e\u003cp\u003eThe 28 mm racing wheel variant comes complete with chain tensioner sliders, the 28 mm pin, nut and brake caliper bracket. Note that the original Kawasaki brake caliper is not compatible with this configuration; a racing caliper and appropriate bracket must be used. The 25 mm original-wheel variant includes chain tensioner sliders, the original-wheel bush, speed sensor bracket and brake caliper bracket, making it the preferred choice for track-day riders wishing to retain stock rear wheel and sensor hardware.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis swingarm is designed specifically for the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKawasaki ZX-10 R — 2016, 2017, 2018, 2019, 2020\u003c\/li\u003e\n\u003cli\u003eKawasaki ZX-10 RR — 2016, 2017, 2018, 2019, 2020\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eImportant: the original Kawasaki brake caliper is not compatible with either swingarm variant. A suitable racing brake caliper and the included bracket must be used. Always verify fitment against your specific build before ordering.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Febur\u003c\/li\u003e\n\u003cli\u003ePart numbers: FE1459 + FE716\u003c\/li\u003e\n\u003cli\u003eMaterial: 100% aluminium\u003c\/li\u003e\n\u003cli\u003eWeight: 6.7 kg\u003c\/li\u003e\n\u003cli\u003eAxle options: 25 mm (original wheel) \/ 28 mm (racing wheel)\u003c\/li\u003e\n\u003cli\u003eDevelopment origin: WSBK collaboration\u003c\/li\u003e\n\u003cli\u003eFitment: Kawasaki ZX-10 R \/ ZX-10 RR (2016–2020)\u003c\/li\u003e\n\u003cli\u003eIncluded hardware: chain tensioner sliders, axle pin, nut, speed sensor bracket (25 mm variant), brake caliper bracket\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Febur","offers":[{"title":"25mm","offer_id":53167160164618,"sku":"FE1459 + FE716","price":5557.3,"currency_code":"EUR","in_stock":false},{"title":"28mm","offer_id":53167160197386,"sku":"FE1401 + FE716","price":5474.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/FE1459.png?v=1780791814"},{"product_id":"racingschwinge-verlangert-35-mm-ducati-panigale-v4","title":"Pierobon Extended Racing Swingarm +35 mm – Ducati Panigale V4\/S\/R (2018–2024)","description":"\u003cp\u003eEngineered for riders who demand measurable, certified improvements in high-speed stability, the Pierobon extended racing swingarm adds exactly 35 mm to the wheelbase of the Ducati Panigale V4\/S\/R, transforming exit-of-corner confidence and braking composure at both track and road pace. Every unit is CNC-machined from high-grade aluminium to tolerances that OEM fabrication simply cannot match at this performance level.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrecision +35 mm extension integrates directly into the original Ducati swingarm, split and CNC-machined to exact dimensional tolerances for a structurally sound, race-ready result.\u003c\/li\u003e\n\u003cli\u003eIncreased wheelbase reduces rear-wheel instability under hard acceleration and shortens pitch oscillation under heavy braking — measurable gains in control.\u003c\/li\u003e\n\u003cli\u003eCalmer, more planted corner exit allows later throttle application and greater confidence at high lean angles.\u003c\/li\u003e\n\u003cli\u003eCNC-machined high-grade aluminium construction ensures long-term durability and consistent geometry under repeated track use.\u003c\/li\u003e\n\u003cli\u003eChain slider included for precise chain guidance and reduced drivetrain wear.\u003c\/li\u003e\n\u003cli\u003eAvailable in two finishes: matte black paint or natural hand-brushed aluminium — choose the look that suits your Panigale's livery.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eConstruction and Performance\u003c\/h2\u003e\u003cp\u003ePierobon's engineers begin with the original Ducati swingarm, dividing it precisely into two halves before CNC-machining a bespoke 35 mm extension section. The result is a component that retains the structural integrity of the factory unit while delivering a longer, more stable platform. The CNC process guarantees that every surface, bore and mounting point is held to racing tolerances, eliminating the flex and dimensional drift that can compromise lap times and rider safety alike.\u003c\/p\u003e\u003cp\u003eThe extended wheelbase directly addresses the Panigale V4's characteristic rear-end liveliness under power. Riders report a noticeably calmer rear tyre attitude when unwinding the throttle out of slow corners, and reduced tendency for the front to lighten aggressively under full acceleration on the straight. For riders transitioning from road use to track days, or for experienced racers seeking a more composed platform at high speed, this modification represents one of the highest-value chassis upgrades available for this model.\u003c\/p\u003e\u003ch2\u003eFinish and Personalisation\u003c\/h2\u003e\u003cp\u003eBoth finish options are produced to the same high standard. The matte black painted version suits race-prepared Panigales with dark or monochrome liveries, while the natural hand-brushed aluminium finish highlights the precision machining and pairs beautifully with the factory Ducati red. Pierobon also offers a service to extend your existing original Ducati swingarm by +35 mm — contact Inter-Pace directly for details and pricing on this bespoke option.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis extended racing swingarm is specifically developed and validated for the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale V4 (2018–2024)\u003c\/li\u003e\n\u003cli\u003eDucati Panigale V4 S (2018–2024)\u003c\/li\u003e\n\u003cli\u003eDucati Panigale V4 R (2018–2024)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003ePierobon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExtension\u003c\/td\u003e\n\u003ctd\u003e+35 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eHigh-grade aluminium, CNC-machined\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish options\u003c\/td\u003e\n\u003ctd\u003eMatte black paint \/ natural hand-brushed aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eDucati Panigale V4 \/ V4 S \/ V4 R (2018–2024)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWhat's included\u003c\/td\u003e\n\u003ctd\u003eExtended swingarm + chain slider\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntended use\u003c\/td\u003e\n\u003ctd\u003eTrack and road\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Pierobon","offers":[{"title":"Natural Aluminium","offer_id":53167211053322,"sku":"F10800A0001A-01","price":4799.0,"currency_code":"EUR","in_stock":false},{"title":"Black","offer_id":53167211086090,"sku":"F10800A0001A-02","price":4799.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/Pierobonswing.png?v=1780792974"},{"product_id":"schwingenachsmutter-kawasaki-lightech-d010","title":"LighTech Swingarm Axle Nut Kawasaki ZX-10 R\/RR (2011-2026) D010","description":"\u003cp\u003eEngineered for riders who demand a precise, confidence-inspiring fit every time they torque down the swingarm axle, the LighTech D010 swingarm axle nut is machined from Ergal 7075 aluminium — one of the highest-grade aerospace alloys available — delivering exceptional strength and notable weight savings in a single compact component. Available in five anodised colours to complement your ZX-10 R or ZX-10 RR build, it is equally at home on a trackday machine and a road-registered superbike.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eErgal 7075 aluminium construction — ultralight yet extraordinarily rigid and corrosion-resistant for long-term reliability\u003c\/li\u003e\n\u003cli\u003eCNC-machined to tight tolerances for a consistently secure, rattle-free fit on the swingarm axle\u003c\/li\u003e\n\u003cli\u003eHard anodised finish protects against corrosion and scuffing while adding a clean racing aesthetic\u003c\/li\u003e\n\u003cli\u003eM20x1.5 thread with a 27 mm hex profile and a maximum tightening torque of 125 Nm\u003c\/li\u003e\n\u003cli\u003eFive colour options — each with a dedicated part number — so you can match or contrast your ZX-10 R\/RR's livery precisely\u003c\/li\u003e\n\u003cli\u003eSuitable for both road and track use without compromise\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Performance\u003c\/h2\u003e\u003cp\u003eLighTech's CNC machining process removes every unnecessary gram while preserving the structural integrity demanded by repeated high-load track sessions. The Ergal 7075 alloy used here is the same grade favoured in motorsport and aerospace applications: it offers a superior strength-to-weight ratio compared with standard 6061 aluminium, resisting deformation even under the 125 Nm maximum tightening torque specified for this application. The anodised surface treatment is integral to the alloy rather than simply a coating, which means it will not flake or peel under the combined assault of tyre spray, chain lubricant and road grime.\u003c\/p\u003e\u003ch2\u003eColour Options and Part Numbers\u003c\/h2\u003e\u003cp\u003eEach colour variant of the D010 carries its own dedicated part number for straightforward ordering and workshop identification:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBlack — D010NER\u003c\/li\u003e\n\u003cli\u003eGold — D010ORO\u003c\/li\u003e\n\u003cli\u003eRed — D010ROS\u003c\/li\u003e\n\u003cli\u003eSilver — D010SIL\u003c\/li\u003e\n\u003cli\u003eCobalt — D010COB\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis swingarm axle nut is a direct, precision fit for the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKawasaki ZX-10 R (2011–2026)\u003c\/li\u003e\n\u003cli\u003eKawasaki ZX-10 RR (2011–2026)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePart number: D010. Always verify your specific model year and axle specification before fitting.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eLighTech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eD010\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eErgal 7075 aluminium, anodised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread\u003c\/td\u003e\n\u003ctd\u003eM20x1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e34.8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e15 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHex diameter\u003c\/td\u003e\n\u003ctd\u003e27 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum tightening torque\u003c\/td\u003e\n\u003ctd\u003e125 Nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eKawasaki ZX-10 R \/ ZX-10 RR (2011–2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"LighTech","offers":[{"title":"Black","offer_id":53167487844618,"sku":"D010NER","price":22.92,"currency_code":"EUR","in_stock":false},{"title":"Blue","offer_id":53167487877386,"sku":"D010COB","price":22.92,"currency_code":"EUR","in_stock":false},{"title":"Red","offer_id":53167487910154,"sku":"D010ROS","price":22.92,"currency_code":"EUR","in_stock":false},{"title":"Gold","offer_id":53167487942922,"sku":"D010ORO","price":22.92,"currency_code":"EUR","in_stock":false},{"title":"Silver","offer_id":53167487975690,"sku":"D010SIL","price":22.92,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/D010NER_a25d8926-927f-47f9-8466-d43f8963e87c.png?v=1780798691"},{"product_id":"lightech-ftrka005sil","title":"LighTech Swingarm Spools for Chain Tensioner TEKA005 – Kawasaki ZX-6R\/636\/RR (2009–2026) FTEKA005SIL","description":"\u003cp\u003eDesigned specifically for the LighTech TEKA005 chain tensioner, these silver swingarm spools (FTEKA005SIL) give your Kawasaki ZX-6R, 636 or RR a secure, rattle-free lifting point that fits first time, every time — so paddock prep stays quick, controlled and confidence-inspiring across a full season of road or track use.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrecise fitment onto the LighTech TEKA005 chain tensioner — not a universal spool, so the interface is always solid and correctly aligned\u003c\/li\u003e\n\u003cli\u003eAllows fast, stable rear-stand placement, eliminating the fumbling and repositioning that wastes time in a busy paddock\u003c\/li\u003e\n\u003cli\u003eProtects the swingarm from scratches caused by roller-style stands during routine lifting\u003c\/li\u003e\n\u003cli\u003eProvides an additional layer of swingarm protection in the event of a tip-over or low-speed fall\u003c\/li\u003e\n\u003cli\u003eSupplied as a matched pair in a clean silver finish, finished to LighTech's exacting race-quality standards\u003c\/li\u003e\n\u003cli\u003eCovers the complete ZX-6R \/ 636 \/ RR model range from 2009 through 2026, making them a long-term keeper even across multiple bikes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuilt for the Paddock, Ready for the Road\u003c\/h2\u003e\u003cp\u003eLighTech has built its reputation supplying teams and serious privateer racers with components that hold up under real-world abuse. The FTEKA005SIL spools are no exception — the silver anodised finish resists corrosion and retains its appearance even after repeated stand use, and the machined profile seats cleanly into the TEKA005 tensioner body without play or movement. Whether you are lifting the bike for a tyre change between sessions or simply performing routine chain maintenance on the road, the spools make the job noticeably more secure than a generic solution.\u003c\/p\u003e\u003ch2\u003eSwingarm Protection You Can Rely On\u003c\/h2\u003e\u003cp\u003eBeyond their primary role as stand attachment points, these spools act as a buffer between the swingarm and any surface it might contact during an accidental tip-over. The compact, purpose-machined profile keeps the swingarm clear of the ground, reducing the risk of costly cosmetic or structural damage — a practical consideration for anyone running a track bike on a tight budget.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThese spools are engineered exclusively for use with the LighTech TEKA005 chain tensioner. They are not universally compatible and will not fit standard OEM or third-party tensioner bobbins. Confirm you have the TEKA005 tensioner installed before ordering.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKawasaki ZX-6R \/ 636 \/ ZX-6RR — model years 2009 to 2026\u003c\/li\u003e\n\u003cli\u003eRequired companion part: LighTech chain tensioner TEKA005\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: LighTech\u003c\/li\u003e\n\u003cli\u003ePart number: FTEKA005SIL\u003c\/li\u003e\n\u003cli\u003eColour \/ finish: silver\u003c\/li\u003e\n\u003cli\u003eCompatible tensioner: LighTech TEKA005\u003c\/li\u003e\n\u003cli\u003eFitment: Kawasaki ZX-6R \/ 636 \/ ZX-6RR (2009–2026)\u003c\/li\u003e\n\u003cli\u003eQuantity supplied: pair (2 pieces)\u003c\/li\u003e\n\u003cli\u003eProduct type: swingarm spools \/ stand bobbins\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"Silver","offer_id":53168117416202,"sku":"FTEKA005SIL","price":61.26,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/FTEAP001SIL_b9c2aa6d-e566-4397-8bc1-ec22417a4439.png?v=1780804196"},{"product_id":"lightech-fteka007sil","title":"LighTech Swingarm Spools for Chain Tensioner TEKA002 – Kawasaki ZX-10 R\/RR (2016–2026) FTEKA007SIL","description":"\u003cp\u003ePrecision-engineered from premium materials, the LighTech FTEKA007SIL swingarm spools are purpose-built to complement the LighTech chain tensioner TEKA002 on the Kawasaki ZX-10 R and ZX-10 RR. Finished in silver and supplied as a matched pair, they bring a level of build quality to paddock and garage work that budget alternatives simply cannot match.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDesigned exclusively for use with the LighTech chain tensioner TEKA002 — ensures a precise, rattle-free fit every time\u003c\/li\u003e\n\u003cli\u003eAccelerates and simplifies paddock stand placement with correct spool geometry\u003c\/li\u003e\n\u003cli\u003eProtects the swingarm from damage in the event of a fall\u003c\/li\u003e\n\u003cli\u003eRoller-stand compatible — eliminates the risk of scratching or marring the swingarm\u003c\/li\u003e\n\u003cli\u003eSupplied as a pair (2 pieces) finished in silver for a clean, purposeful look\u003c\/li\u003e\n\u003cli\u003ePart number FTEKA007SIL for exact ordering confidence\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Materials\u003c\/h2\u003e\u003cp\u003eLighTech's reputation rests on its refusal to cut corners in material selection or machining tolerances. The FTEKA007SIL spools reflect that philosophy: each unit is crafted to exacting standards, delivering the kind of surface finish and dimensional accuracy that makes paddock stand engagement smooth and repeatable. The silver finish is not merely cosmetic — it serves as a first indicator of surface integrity, making wear or damage immediately visible at a glance.\u003c\/p\u003e\u003ch2\u003eTrack and Garage Use\u003c\/h2\u003e\u003cp\u003eWhether you are changing rear tyres between sessions at the track or carrying out routine chain maintenance in the workshop, the FTEKA007SIL spools make the job faster and safer. By working in conjunction with the TEKA002 chain tensioner, they allow the paddock stand to be seated in a single, confident motion rather than the fumbling that comes with mismatched or generic spools. The swingarm protection they offer is a genuine bonus for anyone who pushes the ZX-10 R hard — crashes happen, and having a sacrificial spool in place rather than bare swingarm metal is straightforward insurance.\u003c\/p\u003e\u003cp\u003eNote: These spools are only compatible when used in combination with the LighTech chain tensioner TEKA002. They are not designed for use with standard or third-party chain tensioners.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eFits the following motorcycles:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKawasaki ZX-10 R (2016–2026)\u003c\/li\u003e\n\u003cli\u003eKawasaki ZX-10 RR (2016–2026)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: LighTech\u003c\/li\u003e\n\u003cli\u003ePart number: FTEKA007SIL\u003c\/li\u003e\n\u003cli\u003eColour: Silver\u003c\/li\u003e\n\u003cli\u003eContents: 2 pieces (1 pair)\u003c\/li\u003e\n\u003cli\u003eCompatible chain tensioner: LighTech TEKA002\u003c\/li\u003e\n\u003cli\u003eFitment: Kawasaki ZX-10 R \/ ZX-10 RR, 2016–2026\u003c\/li\u003e\n\u003cli\u003eProduct type: Swingarm spools \/ paddock stand bobbins\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"Silver","offer_id":53168117481738,"sku":"SY-007SIL-A2DC82-01","price":74.86,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/FTEAP004SIL_cf96359e-8e6f-4450-af58-0e5cdf65767a.png?v=1780804197"},{"product_id":"lightech-fteya005sil","title":"LighTech Swingarm Spools for Chain Tensioners FTEYA005\/TEYA009 – Yamaha YZF-R1\/M RN65 (2020–2026) FTEYA005SIL","description":"\u003cp\u003eEngineered to the exacting standards LighTech applies across its race-proven range, these silver swingarm spools for the Yamaha YZF-R1 and YZF-R1M RN65 (2020–2026) are built from robust, precision-machined material that shrugs off the rigours of paddock life without a mark. Designed exclusively for use with LighTech chain tensioners TEYA005 and TEYA009, they make paddock-stand work faster, safer and scratch-free.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrecision-machined silver-finish spools crafted from durable, high-resistance material for lasting performance at the track\u003c\/li\u003e\n\u003cli\u003eEnables fast, stable and repeatable rear-stand engagement — essential for quick tyre changes and pre-session prep\u003c\/li\u003e\n\u003cli\u003eProtects the swingarm from damage during tip-overs, keeping expensive carbon or aluminium sections unmarked\u003c\/li\u003e\n\u003cli\u003eEliminates scratches and scuffing when using a roller stand — no more cosmetic damage to the swingarm\u003c\/li\u003e\n\u003cli\u003eSupplied as a matched pair, so both sides of your setup receive identical quality and fitment\u003c\/li\u003e\n\u003cli\u003eCompatible exclusively with LighTech chain tensioners TEYA005 and TEYA009 — a purposefully integrated system\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePrecision Where It Counts\u003c\/h2\u003e\u003cp\u003eAt the track, every minute in the garage counts. The FTEYA005SIL spools are machined to sit flush and secure within the LighTech TEYA005 and TEYA009 chain tensioner housings, creating a stable platform the moment the rear stand makes contact. There is no rocking, no repositioning, no wasted time. The silver finish is not merely aesthetic — it reflects LighTech's commitment to components that look as considered as they perform, even after repeated paddock stand cycles and the inevitable knocks of race-day preparation.\u003c\/p\u003e\u003ch2\u003eSwingarm Protection Without Compromise\u003c\/h2\u003e\u003cp\u003eA set of quality swingarm spools does double duty: they are a working tool and a protective measure. When a bike goes over in the paddock — and it happens — properly fitted spools absorb contact forces and prevent the swingarm from taking the impact directly. The robust material used in the FTEYA005SIL resists deformation and surface damage, keeping the swingarm and the tensioner assembly in service longer. For track riders and race mechanics who regard their machinery as an investment, that protection has real monetary value.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThese spools are designed and approved for the following:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eYamaha YZF-R1 RN65 (model years 2020–2026)\u003c\/li\u003e\n\u003cli\u003eYamaha YZF-R1M RN65 (model years 2020–2026)\u003c\/li\u003e\n\u003cli\u003eFor use with LighTech chain tensioner TEYA005 only\u003c\/li\u003e\n\u003cli\u003eFor use with LighTech chain tensioner TEYA009 only\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThese spools are not compatible with other chain tensioner brands or models. Confirm your tensioner part number before ordering.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: LighTech\u003c\/li\u003e\n\u003cli\u003ePart number: FTEYA005SIL\u003c\/li\u003e\n\u003cli\u003eColour: Silver\u003c\/li\u003e\n\u003cli\u003eQuantity: 2 pieces (1 pair)\u003c\/li\u003e\n\u003cli\u003eCompatible chain tensioners: TEYA005, TEYA009\u003c\/li\u003e\n\u003cli\u003eFitment: Yamaha YZF-R1 \/ YZF-R1M RN65 (2020–2026)\u003c\/li\u003e\n\u003cli\u003eApplication: Rear paddock stand, roller stand use, swingarm protection\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"Silver","offer_id":53168118595850,"sku":"SY-005SIL-4C856E-01","price":74.86,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/FTEAP004SIL_9f5a7bef-af70-4d45-bcd0-0bb4a286acbc.png?v=1780804211"},{"product_id":"lightech-fteka006","title":"LighTech Swingarm Spools for Roller Stands – Kawasaki ZX-10 R\/RR (2016-2026) FTEKA006","description":"\u003cp\u003eIf you lift your ZX-10 R or ZX-10 RR regularly — whether in the garage between sessions or in the pit lane at a trackday — the LighTech FTEKA006 swingarm spools give you a secure, scratch-free mounting point every single time. Supplied as a pair in silver and designed to mount directly to the swingarm without any intermediate adapter, they make daily workshop use genuinely effortless.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFits Kawasaki ZX-10 R and ZX-10 RR, model years 2016 to 2026\u003c\/li\u003e\n\u003cli\u003eDirect swingarm mounting — no adapter required for a clean, stable lift\u003c\/li\u003e\n\u003cli\u003eCompatible with both roller stands and paddock stands\u003c\/li\u003e\n\u003cli\u003eScratch-free contact keeps your swingarm in showroom condition during regular use\u003c\/li\u003e\n\u003cli\u003eIdeal for trackdays, home workshop maintenance, and transport preparation\u003c\/li\u003e\n\u003cli\u003eSupplied as a complete pair (2 pieces) including all mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuilt for Frequent, Confident Use\u003c\/h2\u003e\u003cp\u003eLighTech manufactures the FTEKA006 spools for riders who lift their bike more than occasionally. The racing-grade forks locate precisely against the swingarm, eliminating any play or rock once the stand is engaged. That secure, wobble-free platform matters whether you are changing tyres before a race weekend or doing a routine chain inspection in your garage at home. The silver anodised finish resists the knocks and scuffs that come with repeated use without looking tired after a few sessions.\u003c\/p\u003e\u003ch2\u003eEveryday Value in the Workshop\u003c\/h2\u003e\u003cp\u003eBecause the spools mount directly to the Kawasaki swingarm pickup points, there is no fumbling with spacers or adapters mid-lift — a detail that sounds small until you are working alone with a paddock stand in one hand. All mounting bolts are included in the box, so the installation is self-contained from the moment the pair arrives. For ZX-10 R owners who move between road riding, trackdays, and transport regularly, these spools pay back their cost quickly in time saved and paintwork protected.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThese swingarm spools are engineered specifically for the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKawasaki ZX-10 R — 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026\u003c\/li\u003e\n\u003cli\u003eKawasaki ZX-10 RR — 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCompatible with roller stands and conventional paddock stands.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: LighTech\u003c\/li\u003e\n\u003cli\u003ePart number: FTEKA006\u003c\/li\u003e\n\u003cli\u003eColour: Silver\u003c\/li\u003e\n\u003cli\u003eFitment: Kawasaki ZX-10 R \/ ZX-10 RR (2016–2026)\u003c\/li\u003e\n\u003cli\u003eMounting: Direct swingarm attachment, no adapter required\u003c\/li\u003e\n\u003cli\u003eCompatibility: Roller stands and paddock stands\u003c\/li\u003e\n\u003cli\u003eScope of delivery: 1 pair (2 pieces) including mounting bolts\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"Silver","offer_id":53168119447818,"sku":"FTEKA006SIL","price":56.44,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/GTEKA006.png?v=1780804220"},{"product_id":"lightech-fteho001","title":"LighTech Swingarm Spools for Honda CBR 1000 RR-R SC82 (2020-2026) – Silver FTEHO001","description":"\u003cp\u003eWhether you are doing a quick tyre change in the garage or preparing for a track day, having a reliable set of swingarm spools makes the job faster, safer and kinder to your machine. The LighTech FTEHO001 spools are purpose-engineered for the Honda CBR 1000 RR-R SC82 (2020–2026), giving you a secure, rattle-free lifting point every single time you reach for the paddock stand.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDesigned specifically for the Honda CBR 1000 RR-R SC82 (2020–2026) — no adapters or modifications required\u003c\/li\u003e\n\u003cli\u003eCompatible with roller-type paddock stands and most racing lift systems used in workshops and at the track\u003c\/li\u003e\n\u003cli\u003eMount directly to the swingarm, protecting it from the scratches and scuffs that bare-metal contact causes over repeated use\u003c\/li\u003e\n\u003cli\u003eSupplied as a complete pair with all necessary mounting hardware included — ready to fit straight out of the box\u003c\/li\u003e\n\u003cli\u003eRobust, precision construction in LighTech's characteristic silver finish that complements the CBR's bodywork\u003c\/li\u003e\n\u003cli\u003eEqually practical for track preparation, routine maintenance and securing the bike during transport\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEveryday Practicality, Built to Last\u003c\/h2\u003e\u003cp\u003eThe FTEHO001 spools strike the balance between track-grade engineering and genuine day-to-day convenience. Fitting directly to the swingarm pickup points of the SC82 chassis, they eliminate the need to hunt for an awkward lift position each time you service the bike. The swingarm receives full contact support through the spool body, so the anodised surface of your Honda stays unmarked however often you lift it. For riders who service their own machine or attend track days regularly, a properly engineered set of spools pays for itself quickly in time saved and paint preserved.\u003c\/p\u003e\u003ch2\u003eTrack and Workshop Ready\u003c\/h2\u003e\u003cp\u003eLighTech designed these spools with both environments in mind. On a race weekend, speed in the pit lane matters — the FTEHO001 pair locate positively on a roller stand so the bike goes up and comes down without fuss, even when you are working against the clock. In the workshop, the same predictable geometry means a single person can lift the CBR 1000 RR-R safely without an assistant steadying the stand. All mounting bolts are included, so there is no last-minute search for the correct thread specification.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThese swingarm spools are designed exclusively for the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eHonda CBR 1000 RR-R SC82 — model years 2020 to 2026\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eCompatible with roller-type paddock stands. No additional adapters are required for direct swingarm fitment.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eLighTech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eFTEHO001\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColour\u003c\/th\u003e\n\u003ctd\u003eSilver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment\u003c\/th\u003e\n\u003ctd\u003eHonda CBR 1000 RR-R SC82 (2020–2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003ctd\u003eRoller-type paddock stands and racing lift systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eScope of Delivery\u003c\/th\u003e\n\u003ctd\u003e1 pair (2 pieces) including all mounting hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCategory\u003c\/th\u003e\n\u003ctd\u003eChassis Accessories\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"LighTech","offers":[{"title":"Silver","offer_id":53168119546122,"sku":"FTEHO001SIL","price":72.3,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/FTEH001.png?v=1780804222"},{"product_id":"lightech-fteya009","title":"LighTech Swingarm Spools for Roller Stands – Yamaha YZF-R3 (2015–2026) FTEYA009","description":"\u003cp\u003ePrecision-machined in Italy, the LighTech FTEYA009 swingarm spools deliver a workshop- and track-ready lifting solution for the Yamaha YZF-R3 that is as uncompromising in its build quality as the bike itself. Where generic adaptors flex or mark the swingarm, these racing-grade forks mount directly and hold firm — every time.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDirect swingarm mounting eliminates the need for additional adaptors, giving a cleaner, more secure connection than universal solutions\u003c\/li\u003e\n\u003cli\u003eCompatible with both roller stands and conventional paddock stands, making them equally at home in the garage or at the circuit\u003c\/li\u003e\n\u003cli\u003eMachined aluminium construction resists corrosion and maintains dimensional accuracy across repeated use cycles\u003c\/li\u003e\n\u003cli\u003eProtective design prevents scratches and swingarm damage during lifting, preserving the finish of your chassis\u003c\/li\u003e\n\u003cli\u003eSupplied as a complete pair with all necessary mounting hardware — no separate purchases required\u003c\/li\u003e\n\u003cli\u003ePurpose-engineered fitment for the Yamaha YZF-R3 (2015–2026) with zero modification needed\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Materials\u003c\/h2\u003e\u003cp\u003eLighTech has built its reputation on the racetrack, and every detail of the FTEYA009 reflects that heritage. The spools are CNC-machined from high-grade aluminium, giving them a strength-to-weight ratio that cast or pressed alternatives simply cannot match. The anodised black finish is not merely cosmetic — it adds a hard, corrosion-resistant layer that withstands the oils, cleaning agents and temperature cycles of regular workshop use. Threads are cut to tight tolerances so the included bolts seat cleanly and torque correctly without risk of cross-threading or play under load.\u003c\/p\u003e\u003ch2\u003ePractical Performance\u003c\/h2\u003e\u003cp\u003eLifting a motorcycle safely should be a one-person job done in seconds, not a balancing act with makeshift supports. The FTEYA009 kit achieves exactly that: both spools attach to the swingarm pick-up points specific to the YZF-R3, creating stable, centred contact points for your roller stand or paddock stand. Whether you are carrying out routine maintenance, swapping tyres between track days, or preparing the bike for transport, the spools keep the rear end elevated securely without any rocking or lateral movement. The swingarm contact surfaces are carefully profiled to spread load evenly, eliminating the concentrated stress that can mark or deform the swingarm over time.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThese spools are designed exclusively for the Yamaha YZF-R3 across the full production span from model year 2015 through to 2026. No modifications, drilling or additional brackets are required. They are compatible with all roller-type paddock stands and conventional fork-style paddock stands that accept standard spool dimensions.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: LighTech\u003c\/li\u003e\n\u003cli\u003ePart number: FTEYA009\u003c\/li\u003e\n\u003cli\u003eFitment: Yamaha YZF-R3 (2015–2026)\u003c\/li\u003e\n\u003cli\u003eMaterial: CNC-machined aluminium\u003c\/li\u003e\n\u003cli\u003eColour: Black (anodised)\u003c\/li\u003e\n\u003cli\u003eCompatibility: Roller stands and conventional paddock stands\u003c\/li\u003e\n\u003cli\u003eMounting: Direct swingarm attachment, no adaptors required\u003c\/li\u003e\n\u003cli\u003eScope of delivery: 1 pair (2 spools) including all mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"Black","offer_id":53168120070410,"sku":"SY-LIGHTECH-F656DB-01","price":49.27,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/FTEYA009.png?v=1780804228"},{"product_id":"lightech-yamaha-r7-fteya007","title":"LighTech Racing Fork Swingarm Spools for Yamaha YZF-R7 (2021-2026) FTEYA007","description":"\u003cp\u003eMachined from a premium aluminium alloy and finished to LighTech's exacting Italian standards, the FTEYA007 Racing Forks bring genuine workshop and paddock professionalism to every lift of your Yamaha YZF-R7. Whether you are preparing for a track day or carrying out routine maintenance, these swingarm spools deliver a rock-solid, scratch-free interface between your swingarm and roller stand — session after session, without compromise.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrecision-machined from a high-grade aluminium alloy for exceptional rigidity and long-term durability\u003c\/li\u003e\n\u003cli\u003eMounts directly to the swingarm of the Yamaha YZF-R7 (2021–2026) — no adapter required\u003c\/li\u003e\n\u003cli\u003eCompatible with roller stands and paddock stands for fast, stable, scratch-free lifting\u003c\/li\u003e\n\u003cli\u003eProtects the swingarm finish and structure during repeated stand use\u003c\/li\u003e\n\u003cli\u003eSupplied as a complete pair with all mounting hardware included — ready to fit straight from the box\u003c\/li\u003e\n\u003cli\u003eAvailable in three anodised finishes: black (FTEYA007NER), red (FTEYA007ROS), and cobalt blue (FTEYA007COB)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Materials\u003c\/h2\u003e\u003cp\u003eLighTech's reputation in the paddock rests on the quality of its machining, and the FTEYA007 is no exception. Each spool is turned from a high-grade aluminium alloy chosen for its combination of low weight, high surface hardness, and resistance to the repeated loading that paddock stand use demands. The anodised finish adds a further layer of protection against corrosion and scuffing, ensuring the spools look as precise as they perform after months of regular use.\u003c\/p\u003e\u003cp\u003eThe direct-mount design eliminates the flex and play associated with adaptor-based systems. Once torqued to the swingarm, the Racing Forks become a fixed reference point for your roller stand, making solo lifting safer and faster every time you visit the garage or paddock.\u003c\/p\u003e\u003ch2\u003eWorkshop and Track Use\u003c\/h2\u003e\u003cp\u003eDesigned equally for the home workshop and the race paddock, the FTEYA007 spools make routine tasks — wheel removal, chain maintenance, tyre changes — significantly more efficient. The roller-stand-compatible profile keeps the bike level and secure throughout the procedure, reducing the risk of slippage and swingarm damage that bare-metal contact can cause over time. All mounting screws are included, so installation requires no additional hardware or modification.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThese LighTech swingarm spools are engineered exclusively for the Yamaha YZF-R7, covering all model years from 2021 through to 2026. They are compatible with roller stands and paddock stands that accept standard spool-style forks.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: LighTech\u003c\/li\u003e\n\u003cli\u003ePart number: FTEYA007 (black: FTEYA007NER \/ red: FTEYA007ROS \/ cobalt: FTEYA007COB)\u003c\/li\u003e\n\u003cli\u003eMaterial: High-grade aluminium alloy\u003c\/li\u003e\n\u003cli\u003eFinish: Anodised (black, red, or cobalt blue)\u003c\/li\u003e\n\u003cli\u003eFitment: Yamaha YZF-R7, model years 2021–2026\u003c\/li\u003e\n\u003cli\u003eMounting: Direct swingarm mount, no adapter required\u003c\/li\u003e\n\u003cli\u003eCompatibility: Roller stands and paddock stands\u003c\/li\u003e\n\u003cli\u003eSupplied: Pair (2 pieces) including all mounting screws\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"Black","offer_id":53168120627466,"sku":"FTEYA007NER","price":72.3,"currency_code":"EUR","in_stock":false},{"title":"Blue","offer_id":53168120660234,"sku":"FTEYA007COB","price":72.3,"currency_code":"EUR","in_stock":false},{"title":"Red","offer_id":53168120693002,"sku":"FTEYA007ROS","price":72.3,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/FTEYA007NER_15b02d95-f858-47aa-9008-bdf9987590f5.png?v=1780804234"},{"product_id":"lightech-fteya007","title":"LighTech Swingarm Spools for Roller Stands – Yamaha YZF-R6 (2017-2026) FTEYA007","description":"\u003cp\u003eEngineered specifically for the Yamaha YZF-R6 RJ27, the LighTech FTEYA007 swingarm spools deliver the secure, scratch-free stand engagement that track days and workshop maintenance demand. Machined from a high-grade aluminium alloy and designed for direct swingarm mounting — no adapters, no compromise.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrecision-fit direct mounting to the YZF-R6 swingarm — no adapter plates or modifications required\u003c\/li\u003e\n\u003cli\u003eCompatible with both roller stands and paddock stands, covering every workshop and circuit scenario\u003c\/li\u003e\n\u003cli\u003eHigh-grade aluminium alloy construction provides a stable, rigid platform that protects the swingarm from scratches and deformation under repeated use\u003c\/li\u003e\n\u003cli\u003eSupplied as a complete pair with all mounting hardware included — ready to fit straight from the box\u003c\/li\u003e\n\u003cli\u003eAvailable in three anodised colour options — black (FTEYA007NER), red (FTEYA007ROS), and cobalt (FTEYA007COB) — to coordinate with your R6's livery\u003c\/li\u003e\n\u003cli\u003eHigh stability and ease of use make solo paddock lifting straightforward and genuinely safe\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesigned for Confidence at the Stand\u003c\/h2\u003e\u003cp\u003eEvery time you lift the R6 on a roller or paddock stand, the contact point between stand and swingarm carries the full weight of the machine. LighTech's FTEYA007 spools replace that vulnerable contact with a purpose-machined aluminium interface, spreading the load correctly and holding the bike secure without lateral movement. The result is a lift that feels planted rather than precarious — important whether you are bleeding brakes on a cold garage morning or rushing through a tyre change between sessions.\u003c\/p\u003e\u003cp\u003eDirect mounting to the swingarm means there is no flex in the system. The spools seat flush, engage the stand rollers cleanly, and stay put. Frequent use leaves no witness marks on the swingarm because the aluminium spool takes all the contact — not the painted or bare alloy of the chassis.\u003c\/p\u003e\u003ch2\u003eBuild Quality and Finish\u003c\/h2\u003e\u003cp\u003eLighTech manufactures these spools from a quality aluminium alloy, anodised in the chosen colour to resist corrosion and retain their appearance across seasons of use. The finish is consistent with the Italian brand's broader racing accessories range and matches the hardware specification expected at club and national race level. Each colour variant carries its own part number — FTEYA007NER for black, FTEYA007ROS for red, and FTEYA007COB for cobalt — so ordering the correct shade is unambiguous.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThe FTEYA007 set is designed and validated for the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eYamaha YZF-R6 (RJ27) — model years 2017 through 2026\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eCompatible with roller stands and paddock stands equipped with standard spool receivers. Direct swingarm fitment; no adapter required.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eLighTech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eFTEYA007 (black: FTEYA007NER \/ red: FTEYA007ROS \/ cobalt: FTEYA007COB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eHigh-grade aluminium alloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eYamaha YZF-R6 RJ27 (2017–2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStand compatibility\u003c\/td\u003e\n\u003ctd\u003eRoller stands and paddock stands\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eDirect swingarm mount, no adapter required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003e2 pieces (1 pair), mounting hardware included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailable colours\u003c\/td\u003e\n\u003ctd\u003eBlack, Red, Cobalt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"LighTech","offers":[{"title":"Black","offer_id":53168120725770,"sku":"FTEYA007NER","price":72.3,"currency_code":"EUR","in_stock":false},{"title":"Blue","offer_id":53168120758538,"sku":"FTEYA007COB","price":72.3,"currency_code":"EUR","in_stock":false},{"title":"Red","offer_id":53168120791306,"sku":"FTEYA007ROS","price":72.3,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/FTEYA007NER.png?v=1780804234"},{"product_id":"standeraufnahmen-lightech-yamaha-r1","title":"LighTech Swingarm Spools for Roller Stands – Yamaha YZF-R1\/M (2015-2026) FTEYA007","description":"\u003cp\u003eWhen lifting your Yamaha YZF-R1 or R1M on a roller stand, the contact point between spool and swingarm is where safe workshop and track-day practice begins or ends. LighTech's FTEYA007 racing spools are engineered to mount directly to the swingarm of all YZF-R1 and R1M variants covered by chassis codes RN32, RN49 and RN65 (2015–2026), delivering a stable, damage-free lifting point every time — no adapters, no compromise.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrecision direct-mount fitment to the YZF-R1\/M swingarm — no adapter required, eliminating play or misalignment during lifting\u003c\/li\u003e\n\u003cli\u003eAluminium construction provides the strength-to-weight ratio demanded by race-prepared machines while resisting corrosion in workshop and paddock environments\u003c\/li\u003e\n\u003cli\u003eFull compatibility with roller stands and conventional paddock stands, giving you flexibility across different lifting equipment\u003c\/li\u003e\n\u003cli\u003eProtects the swingarm from scratches and stress marks that repeated stand contact can cause on bare aluminium\u003c\/li\u003e\n\u003cli\u003eSupplied as a matched pair with all mounting hardware included — ready to fit straight from the box\u003c\/li\u003e\n\u003cli\u003eAvailable in black (FTEYA007NER), red (FTEYA007ROS) and cobalt (FTEYA007COB) to suit your machine's livery\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuilt for the Demands of Track and Workshop\u003c\/h2\u003e\u003cp\u003eLighTech manufacture their chassis accessories to the exacting standards expected by race teams and serious track-day riders. The FTEYA007 spools are machined from aluminium and finished to a level that stands up to the rigours of repeated use — whether that means weekly tyre changes in the garage or rapid wheel swaps in the paddock. The direct-mount design removes the complexity of universal adapters, meaning the spool sits exactly where it should relative to the swingarm, keeping the bike perfectly stable under load.\u003c\/p\u003e\u003ch2\u003eEveryday Usability\u003c\/h2\u003e\u003cp\u003eBeyond the track, these spools make routine maintenance significantly more straightforward. Lifting the rear of the R1 or R1M for chain lubrication, rear wheel removal or suspension work becomes a two-minute task rather than a wrestling match with a trolley jack. The included mounting screws mean there is nothing additional to source — fit them once and they stay in place, ready whenever the stand comes out.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThese spools are designed specifically for the following Yamaha models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eYamaha YZF-R1 — chassis codes RN32, RN49, RN65 — model years 2015 to 2026\u003c\/li\u003e\n\u003cli\u003eYamaha YZF-R1M — chassis codes RN32, RN49, RN65 — model years 2015 to 2026\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSupplied as one pair (2 pieces) with mounting bolts included. Compatible with roller stands and paddock stands.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: LighTech\u003c\/li\u003e\n\u003cli\u003ePart number (black): FTEYA007NER\u003c\/li\u003e\n\u003cli\u003ePart number (red): FTEYA007ROS\u003c\/li\u003e\n\u003cli\u003ePart number (cobalt): FTEYA007COB\u003c\/li\u003e\n\u003cli\u003eMaterial: aluminium\u003c\/li\u003e\n\u003cli\u003eQuantity: 2 pieces (1 pair)\u003c\/li\u003e\n\u003cli\u003eMounting hardware: included\u003c\/li\u003e\n\u003cli\u003eFitment: Yamaha YZF-R1\/M RN32, RN49, RN65 (2015–2026)\u003c\/li\u003e\n\u003cli\u003eColours available: black, red, cobalt\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"Black","offer_id":53168120824074,"sku":"FTEYA007NER","price":72.3,"currency_code":"EUR","in_stock":false},{"title":"Blue","offer_id":53168120856842,"sku":"FTEYA007COB","price":72.3,"currency_code":"EUR","in_stock":false},{"title":"Red","offer_id":53168120889610,"sku":"FTEYA007ROS","price":72.3,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/FTEYA007NER_113e0c00-4e6e-4772-97b4-7024bfeb3ed2.png?v=1780804235"},{"product_id":"bobbins-aprilia-rs-457","title":"LighTech Bobbins \/ Swingarm Spools M6 – Aprilia RS 457 (2024–2026) SCV003","description":"\u003cp\u003ePrecision-crafted in aluminium and finished in five distinctive anodised colours, the LighTech SCV003 swingarm spools bring Italian racing heritage directly to your Aprilia RS 457. Designed to thread into the swingarm's M6 mounting points, they provide a secure, scratch-free interface for paddock stands equipped with V-fork (racing-fork) heads — a small detail that makes a real difference every time you work on the bike.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMachined aluminium construction delivers a refined, race-paddock aesthetic in five anodised finishes: black, gold, red, silver and cobalt\u003c\/li\u003e\n\u003cli\u003eM6 thread screws directly into the swingarm's factory-tapped holes — no drilling or modification required\u003c\/li\u003e\n\u003cli\u003eV-fork compatible design locks onto racing-fork paddock stands for outstanding stability when the bike is lifted\u003c\/li\u003e\n\u003cli\u003eProtects the swingarm from scratches, scuffs and the risk of the stand slipping or tipping\u003c\/li\u003e\n\u003cli\u003eSupplied as a complete pair (2 spools) with all necessary mounting hardware included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign, Finish and Heritage\u003c\/h2\u003e\u003cp\u003eLighTech has been producing precision aftermarket aluminium components in Italy for decades, and the SCV003 spools are a clear expression of that tradition. Every spool is machined from quality aluminium and anodised for long-lasting corrosion resistance, with each colour — from understated matte black to vivid cobalt — carrying its own part number so you can match the spools to your RS 457's livery or personal style. The result is a workshop accessory that looks as purposeful as it is functional.\u003c\/p\u003e\u003ch2\u003ePerformance and Practical Use\u003c\/h2\u003e\u003cp\u003eUsing a paddock stand without dedicated spools puts unnecessary stress on the swingarm and risks scratching the finish or destabilising the bike during maintenance. The SCV003 spools eliminate that risk entirely. Once threaded into the swingarm, they provide a defined, positive seating point for V-fork paddock stand heads, keeping the bike perfectly level and secure while you service brakes, change tyres or carry out routine maintenance.\u003c\/p\u003e\u003ch2\u003eImportant Compatibility Note\u003c\/h2\u003e\u003cp\u003eThese spools require the swingarm to have pre-existing M6 threaded mounting holes. They are not suitable for motorcycles with a single-sided swingarm or for any model that does not feature compatible M6 thread inserts in the swingarm. Always verify your specific bike's swingarm configuration before purchase.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eAprilia RS 457 — model years 2024, 2025, 2026\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eColour Part Numbers\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBlack — SCV003NER\u003c\/li\u003e\n\u003cli\u003eGold — SCV003ORO\u003c\/li\u003e\n\u003cli\u003eRed — SCV003ROS\u003c\/li\u003e\n\u003cli\u003eSilver — SCV003SIL\u003c\/li\u003e\n\u003cli\u003eCobalt — SCV003COB\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eLighTech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number (series)\u003c\/td\u003e\n\u003ctd\u003eSCV003\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread size\u003c\/td\u003e\n\u003ctd\u003eM6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eAluminium (anodised)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStand compatibility\u003c\/td\u003e\n\u003ctd\u003eV-fork \/ racing-fork paddock stands\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupplied quantity\u003c\/td\u003e\n\u003ctd\u003e2 spools (1 pair) including mounting hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eAprilia RS 457 (2024–2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailable colours\u003c\/td\u003e\n\u003ctd\u003eBlack, Gold, Red, Silver, Cobalt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"LighTech","offers":[{"title":"Red","offer_id":53168120955146,"sku":"SCV003ROS","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Gold","offer_id":53168120987914,"sku":"SCV003ORO","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Cobalt Blue","offer_id":53168121020682,"sku":"SCV003COB","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Silver","offer_id":53168121053450,"sku":"SCV003SIL","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Black","offer_id":53168121086218,"sku":"SCV003NER","price":24.63,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/SCV003NER_9dbe363e-78db-4c84-bafd-59f24b7581c8.png?v=1780804238"},{"product_id":"bobbins-aprilia-rsv4","title":"LighTech M6 Swingarm Bobbins for Aprilia RSV4 \/ RSV4 1100 Factory \/ R \/ RR \/ RF (2009–2026) – SCV003","description":"\u003cp\u003eWhen every second in the pits counts, the LighTech SCV003 bobbins deliver the professional-grade swingarm lift point your Aprilia RSV4 deserves. Machined from high-quality aluminium and engineered for direct M6 thread fitment into the swingarm, these bobbins lock a paddock-stand V-cradle in place without scratch risk or tipping — the same solution trusted at circuit level from club racing to World Superbike paddocks.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDirect M6 thread engagement into existing swingarm bosses — no adapters, no fuss, race-ready fitment in minutes\u003c\/li\u003e\n\u003cli\u003eCompatible with all standard V-cradle racing paddock stands for secure, stable rear wheel lift\u003c\/li\u003e\n\u003cli\u003ePrecision-machined aluminium construction keeps unsprung weight negligible while standing up to repeated paddock use\u003c\/li\u003e\n\u003cli\u003eScratch-free and tip-resistant lift geometry protects the swingarm finish during tyre changes and pre-race prep\u003c\/li\u003e\n\u003cli\u003eSupplied as a pair, complete with all mounting hardware — nothing extra to source\u003c\/li\u003e\n\u003cli\u003eAvailable in five anodised colours — colour-match your RSV4 or make a statement in the paddock\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuilt for the Track, Refined for the Garage\u003c\/h2\u003e\u003cp\u003eThe SCV003 is not a compromise accessory. LighTech developed it to meet the demands of regular track-day and race use, where a paddock stand must locate precisely and hold absolutely still under a superbike that has just come off a hot lap. The M6 thread interface is machined to tight tolerances so the bobbin seats flush against the swingarm face, eliminating the wobble and surface damage that cheap alternatives introduce over time. The anodised aluminium finish is equally at home under workshop strip-lights as it is in an Aprilia race tent.\u003c\/p\u003e\u003ch2\u003eColour Options and Part Numbers\u003c\/h2\u003e\u003cp\u003eThe SCV003 is offered in five anodised finishes. Each colour carries its own part number for precise ordering:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBlack – SCV003NER\u003c\/li\u003e\n\u003cli\u003eGold – SCV003ORO\u003c\/li\u003e\n\u003cli\u003eRed – SCV003ROS\u003c\/li\u003e\n\u003cli\u003eSilver – SCV003SIL\u003c\/li\u003e\n\u003cli\u003eCobalt – SCV003COB\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eImportant Fitment Note\u003c\/h2\u003e\u003cp\u003eThese bobbins require existing M6 threaded bores in the swingarm. They are not suitable for motorcycles with a single-sided swingarm or for swingarms that do not feature mounting threads at the correct location. Please verify your swingarm specification before ordering.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAprilia RSV4 (2009–2026)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 R (2009–2026)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 RR (2009–2026)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 RF (2009–2026)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 1100 Factory (2019–2026)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eLighTech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eSCV003 (suffix by colour: NER \/ ORO \/ ROS \/ SIL \/ COB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread size\u003c\/td\u003e\n\u003ctd\u003eM6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eAnodised (Black, Gold, Red, Silver, Cobalt)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity supplied\u003c\/td\u003e\n\u003ctd\u003e2 bobbins (1 pair), including all mounting hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStand compatibility\u003c\/td\u003e\n\u003ctd\u003eV-cradle racing paddock stands\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eAprilia RSV4 \/ RSV4 1100 Factory \/ R \/ RR \/ RF (2009–2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"LighTech","offers":[{"title":"Red","offer_id":53168121741578,"sku":"SCV003ROS","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Gold","offer_id":53168121774346,"sku":"SCV003ORO","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Cobalt","offer_id":53168121807114,"sku":"SCV003COB","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Silver","offer_id":53168121839882,"sku":"SCV003SIL","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Black","offer_id":53168121872650,"sku":"SCV003NER","price":24.63,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/SCV003NER_96d41a88-579f-42cf-aeee-918033f34546.png?v=1780804249"},{"product_id":"bobbins-lightech-m6-yamaha-r3","title":"LighTech Bobbins M6 for Yamaha YZF-R3 (2015-2026) – Swingarm Stand Spools SCV003","description":"\u003cp\u003eElevating your Yamaha YZF-R3 on a paddock stand should be effortless and secure every single time — the LighTech SCV003 bobbins are precision-machined aluminium spools that thread directly into the swingarm's existing M6 holes, giving you a rock-solid lifting point with no improvisation, no stress on the frame, and no scratched bodywork. Whether you are preparing for a track day or carrying out routine maintenance at home, these spools make the job feel as polished as the bike itself.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDirect-fit M6 thread engages the factory swingarm holes on the YZF-R3 — no drilling, no adapters, no guesswork\u003c\/li\u003e\n\u003cli\u003eMachined from high-grade aluminium for a durable, lightweight solution that resists corrosion and looks purposeful\u003c\/li\u003e\n\u003cli\u003eCompatible with all V-fork racing stands and roller-type paddock stands for maximum workshop versatility\u003c\/li\u003e\n\u003cli\u003eSupplied as a matched pair with all mounting hardware included, so you can fit them straight from the box\u003c\/li\u003e\n\u003cli\u003eAvailable in five anodised colours — Black (SCV003NER), Red (SCV003ROS), Silver (SCV003SIL), Gold (SCV003ORO), and Cobalt (SCV003COB) — to complement any YZF-R3 livery\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSecure Lifting, Every Time\u003c\/h2\u003e\u003cp\u003eThe SCV003 bobbins are threaded directly into the swingarm rather than clamped around it, which distributes the load evenly and eliminates the risk of the stand slipping during service. The anodised aluminium body is tough enough to handle repeated use without deforming, and the smooth cylindrical profile rolls cleanly into the V-fork of a racing stand without snagging. If you use your R3 on track regularly, having a dedicated set of swingarm spools fitted permanently saves valuable time when lifting the bike between sessions.\u003c\/p\u003e\u003ch2\u003eClean Installation, Lasting Fit\u003c\/h2\u003e\u003cp\u003eThe entire installation takes only minutes. The M6 bolts thread into the existing tapped holes in the swingarm — holes that Yamaha machined specifically for this purpose — so the spools sit flush and secure with no modification to the chassis. The included mounting screws are sized correctly for the application, meaning you do not need to source anything separately. Once fitted, the spools sit low and tidy against the swingarm, adding a subtle race-paddock aesthetic without cluttering the bike's clean lines.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThese bobbins are designed specifically for the Yamaha YZF-R3 across model years 2015 to 2026. They require M6 threaded holes in the swingarm — a feature present on all standard YZF-R3 swingarms within this range. They are not suitable for single-sided swingarms or for frames that do not have dedicated M6 mounting points at the swingarm.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: LighTech\u003c\/li\u003e\n\u003cli\u003ePart number: SCV003 (suffix by colour: NER \/ ROS \/ SIL \/ ORO \/ COB)\u003c\/li\u003e\n\u003cli\u003eThread size: M6\u003c\/li\u003e\n\u003cli\u003eMaterial: Aluminium, anodised\u003c\/li\u003e\n\u003cli\u003eQuantity: 1 pair (2 pieces), mounting screws included\u003c\/li\u003e\n\u003cli\u003eFitment: Yamaha YZF-R3, model years 2015–2026\u003c\/li\u003e\n\u003cli\u003eCompatible stand type: V-fork racing stands and roller paddock stands\u003c\/li\u003e\n\u003cli\u003eAvailable colours: Black, Red, Silver, Gold, Cobalt\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"Red","offer_id":53168122953994,"sku":"SCV003ROS","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Gold","offer_id":53168122986762,"sku":"SCV003ORO","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Blue","offer_id":53168123019530,"sku":"SCV003COB","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Silver","offer_id":53168123052298,"sku":"SCV003SIL","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Black","offer_id":53168123085066,"sku":"SCV003NER","price":24.63,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/SCV003NER_94f44c14-e767-4d8a-a170-d8512d43a991.png?v=1780804255"},{"product_id":"bobbins-lightech-m6-yamaha-r7","title":"LighTech Bobbins Swingarm Spools M6 Yamaha YZF-R7 (2021-2026) SCV003","description":"\u003cp\u003eWhen every second in the pit lane counts, you need paddock stand spools that install without fuss and hold your R7 absolutely steady. The LighTech SCV003 M6 bobbins thread directly into the existing swingarm pick-up points on the Yamaha YZF-R7 (2021–2026), giving you a secure, scratch-free lift every time — whether you are prepping for a track day or carrying out workshop maintenance.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDirect M6 thread fitment into the factory swingarm bosses — no adapter plates, no bodged solutions, no wasted time in the paddock\u003c\/li\u003e\n\u003cli\u003ePrecision-machined aluminium construction keeps weight to a minimum while providing the rigidity demanded on track\u003c\/li\u003e\n\u003cli\u003eCompatible with all standard V-head paddock stands and roller stands, the universal choice for race teams and track-day riders alike\u003c\/li\u003e\n\u003cli\u003eSupplied as a matched pair, complete with mounting bolts — ready to fit straight from the packet\u003c\/li\u003e\n\u003cli\u003eAvailable in five anodised colours — Black (SCV003NER), Red (SCV003ROS), Silver (SCV003SIL), Gold (SCV003ORO) and Cobalt (SCV003COB) — to complement your R7's livery\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuilt for the Track, Refined for the Workshop\u003c\/h2\u003e\u003cp\u003eLighTech engineered the SCV003 with the same philosophy that underpins their entire race-derived accessories range: eliminate unnecessary weight, maximise reliability, and make installation intuitive. The anodised aluminium body resists corrosion from track grime and cleaning chemicals, while the precise M6 thread engagement means the spools sit flush and rattle-free even under the vibration of a race-prepared engine. Whether your R7 is a weekend track weapon or a road bike that sees regular service, these bobbins take the effort out of every lift.\u003c\/p\u003e\u003ch2\u003eColour Options \u0026amp; Part Numbers\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBlack — SCV003NER\u003c\/li\u003e\n\u003cli\u003eRed — SCV003ROS\u003c\/li\u003e\n\u003cli\u003eSilver — SCV003SIL\u003c\/li\u003e\n\u003cli\u003eGold — SCV003ORO\u003c\/li\u003e\n\u003cli\u003eCobalt — SCV003COB\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eDesigned exclusively for the Yamaha YZF-R7 model years 2021 to 2026. Fitment requires a twin-sided swingarm with M6 threaded bores at the standard pick-up points. These spools are not compatible with single-sided swingarms or swingarms that lack threaded spool inserts. If you are unsure whether your specific build retains the factory threaded bosses, check the swingarm before ordering.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: LighTech\u003c\/li\u003e\n\u003cli\u003ePart number: SCV003 (suffix varies by colour)\u003c\/li\u003e\n\u003cli\u003eThread size: M6\u003c\/li\u003e\n\u003cli\u003eMaterial: aluminium\u003c\/li\u003e\n\u003cli\u003eFitment: Yamaha YZF-R7 (2021–2026)\u003c\/li\u003e\n\u003cli\u003eStand compatibility: V-head paddock stands and roller stands\u003c\/li\u003e\n\u003cli\u003eSwingarm type required: twin-sided with M6 threaded bores\u003c\/li\u003e\n\u003cli\u003eScope of delivery: 1 pair (2 spools) including mounting bolts\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"Red","offer_id":53168123183370,"sku":"SCV003ROS","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Gold","offer_id":53168123216138,"sku":"SCV003ORO","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Blue","offer_id":53168123248906,"sku":"SCV003COB","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Silver","offer_id":53168123281674,"sku":"SCV003SIL","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Black","offer_id":53168123314442,"sku":"SCV003NER","price":24.63,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/SCV003NER_82172e46-59f3-4e8d-9e28-60ef2b2100b4.png?v=1780804261"},{"product_id":"bobbins-lightech-m6-yamaha-r6-rj27","title":"LighTech Bobbins \/ Swingarm Spools M6 – Yamaha YZF-R6 RJ27 (2017-2026) SCV003","description":"\u003cp\u003eMachined from high-grade aluminium on a CNC mill and finished in your choice of five anodised colours, the LighTech SCV003 swingarm spools bring the same pit-lane precision to your Yamaha YZF-R6 RJ27 that Italian race teams demand. If the way a component is made matters as much as what it does, these bobbins are the only sensible choice for your R6.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCNC-machined aluminium construction delivers exceptional dimensional accuracy and a scratch-resistant contact surface that protects your swingarm on every lift.\u003c\/li\u003e\n\u003cli\u003eM6 thread screws directly into the swingarm without adapters — a clean, rattle-free installation that takes minutes.\u003c\/li\u003e\n\u003cli\u003eCompatible with all V-head paddock stands, making workshop maintenance and trackday paddock work straightforward and safe.\u003c\/li\u003e\n\u003cli\u003eAvailable in five anodised finishes — Black (SCV003NER), Red (SCV003ROS), Silver (SCV003SIL), Gold (SCV003ORO) and Cobalt (SCV003COB) — so the detail matches your livery.\u003c\/li\u003e\n\u003cli\u003eSupplied as a pair with all mounting hardware included, ready to fit straight from the box.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Materials\u003c\/h2\u003e\u003cp\u003eLighTech has built its reputation on components that meet the tolerances of motorsport, and the SCV003 is no exception. The billet aluminium body is precision turned and then hard-anodised, producing a surface that resists corrosion, oil contamination and the abrasion of repeated stand contact far better than painted or uncoated steel alternatives. Every thread is cut to exact M6 specification, ensuring a positive, play-free engagement with the swingarm's factory-drilled mounting points.\u003c\/p\u003e\u003ch2\u003eWorkshop and Track Use\u003c\/h2\u003e\u003cp\u003eWhether you are changing tyres in your garage, bleeding the brakes before a track day, or simply giving the chain a proper clean and lube, a stable and reliable lift point makes every job safer and quicker. The SCV003 spools seat firmly in the V-forks of a standard paddock stand and hold the R6 rock-steady while you work. When not in use they sit flush and unobtrusive, adding a subtle race-inspired touch to the swingarm.\u003c\/p\u003e\u003ch2\u003eImportant Fitment Note\u003c\/h2\u003e\u003cp\u003eThese spools are designed exclusively for swingarms fitted with M6 threaded mounting holes. They are not suitable for single-sided swingarms or frames without pre-drilled M6 mounting threads. Please verify your swingarm specification before ordering.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eYamaha YZF-R6 RJ27 — model years 2017 to 2026\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eFeature\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eLighTech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart numbers\u003c\/td\u003e\n\u003ctd\u003eSCV003NER \/ SCV003ROS \/ SCV003SIL \/ SCV003ORO \/ SCV003COB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread size\u003c\/td\u003e\n\u003ctd\u003eM6 — direct swingarm fitment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eCNC-machined aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStand compatibility\u003c\/td\u003e\n\u003ctd\u003eV-head paddock stands\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColours\u003c\/td\u003e\n\u003ctd\u003eBlack, Red, Silver, Gold, Cobalt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eScope of delivery\u003c\/td\u003e\n\u003ctd\u003e2 spools (1 pair) including all mounting bolts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eYamaha YZF-R6 RJ27 (2017–2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"LighTech","offers":[{"title":"Red","offer_id":53168123379978,"sku":"SCV003ROS","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Gold","offer_id":53168123412746,"sku":"SCV003ORO","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Cobalt Blue","offer_id":53168123445514,"sku":"SCV003COB","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Silver","offer_id":53168123478282,"sku":"SCV003SIL","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Black","offer_id":53168123511050,"sku":"SCV003NER","price":24.63,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/SCV003NER_0ab064e0-61cb-49b9-a991-cb09b1424f19.png?v=1780804263"},{"product_id":"bobbins-blozen-standeraufnahme-lightech-m8-bmw-s1000rr-k46-k67-09-25-scv004","title":"LighTech Bobbins \/ Swingarm Spools M8 for BMW S1000RR K46\/K67 (2009–2026) – SCV004","description":"\u003cp\u003eA straightforward upgrade that pays for itself at every service interval, the LighTech SCV004 swingarm spools give BMW S1000RR owners a secure, rattle-free lifting point without any need for adapters or improvised solutions. Supplied as a pair with all fitting hardware included, they screw directly into the swingarm's existing M8 threaded bosses and are ready to use the moment they arrive.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDirect M8 thread fitment into the swingarm — no adapters, no fuss, no wasted time in the garage.\u003c\/li\u003e\n\u003cli\u003eCompatible with all V-head paddock stands and racing roller stands, making them equally useful at home or in the pit lane.\u003c\/li\u003e\n\u003cli\u003eCNC-machined aluminium construction combines durability with a weight saving over steel alternatives.\u003c\/li\u003e\n\u003cli\u003eAvailable in six anodised colours — Black (SCV004NER), Red (SCV004ROS), Silver (SCV004SIL), Gold (SCV004ORO), Cobalt (SCV004COB) and Green (SCV004VER) — so they can complement or contrast your bike's livery.\u003c\/li\u003e\n\u003cli\u003eSupplied as a matched pair complete with fitting bolts, so everything needed for installation is in the box.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEveryday Usability\u003c\/h2\u003e\u003cp\u003eFor any rider who carries out their own tyre changes, chain maintenance, or brake work, reliable and repeatable lifting is the foundation of a safe working environment. The SCV004 bolts sit flush and secure in the swingarm, protecting the surrounding paintwork and providing a positive contact surface for the stand's V-head on every lift. There is no rocking, no slipping, and no risk of the bike toppling because a makeshift solution has shifted under load. Whether the bike lives on a paddock stand in the garage all week or only goes onto the stand once a season for a service, the LighTech spools make the job quicker and safer every time.\u003c\/p\u003e\u003ch2\u003eBuild Quality\u003c\/h2\u003e\u003cp\u003eLighTech manufactures the SCV004 from CNC-machined aluminium with a hard anodised finish that resists corrosion and everyday abrasion. The threading is cut to precise tolerances so engagement with the swingarm bosses is smooth and positive — there is no cross-threading risk that can arise from poorly machined aftermarket alternatives. The colour anodising runs through the surface layer rather than sitting on top of it, meaning the finish holds up through repeated use and washing without flaking or dulling.\u003c\/p\u003e\u003ch2\u003eCompatibility Note\u003c\/h2\u003e\u003cp\u003eThese spools are designed exclusively for BMW S1000RR variants fitted with M8 threaded bores in the swingarm. They are not suitable for single-sided swingarm configurations or for any model year that does not feature dedicated spool mounting points. Please verify your swingarm thread size before ordering.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eBMW S1000RR K46 \/ K67 (2009–2026)\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eLighTech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eSCV004 (suffix varies by colour)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread size\u003c\/td\u003e\n\u003ctd\u003eM8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eCNC-machined aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eBMW S1000RR K46 \/ K67, 2009–2026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStand compatibility\u003c\/td\u003e\n\u003ctd\u003eV-head paddock stands and racing roller stands\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003e2 pieces (1 pair)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardware included\u003c\/td\u003e\n\u003ctd\u003eYes — fitting bolts supplied\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"LighTech","offers":[{"title":"Red","offer_id":53168124363018,"sku":"SCV004ROS","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Gold","offer_id":53168124395786,"sku":"SCV004ORO","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Blue","offer_id":53168124428554,"sku":"SCV004COB","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Silver","offer_id":53168124461322,"sku":"SCV004SIL","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Black","offer_id":53168124494090,"sku":"SCV004NER","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Green","offer_id":53168124526858,"sku":"SCV004VER","price":24.63,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/SCV004NER.png?v=1780804266"},{"product_id":"bobbins-standeraufnahme-bmw-m1000rr-k66","title":"LighTech Swingarm Bobbins M8 for BMW M1000RR K66 (2021-2026) SCV004","description":"\u003cp\u003eWhen seconds count in the pit lane, the last thing you need is fumbling with a mismatched paddock stand. The LighTech SCV004 swingarm bobbins are purpose-built for track use on the BMW M1000RR K66, threading directly into the M8 swingarm bosses to deliver a rock-solid, scratch-free lift every single time — from morning warm-up to post-race teardown.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCNC-machined aluminium construction engineered to racing tolerances for repeatable, fatigue-free use at the circuit\u003c\/li\u003e\n\u003cli\u003eM8 thread size screws directly into the BMW M1000RR K66 swingarm — no adapters, no improvisation\u003c\/li\u003e\n\u003cli\u003eFull compatibility with V-fork and roller-type paddock stands, the industry standard in professional racing paddocks\u003c\/li\u003e\n\u003cli\u003eProtects the swingarm finish from scratches and prevents the bike from tipping during stand-mounted work\u003c\/li\u003e\n\u003cli\u003eSupplied as a matched pair with all necessary mounting hardware included\u003c\/li\u003e\n\u003cli\u003eAvailable in six anodised colours — Black (SCV004NER), Red (SCV004ROS), Silver (SCV004SIL), Gold (SCV004ORO), Cobalt (SCV004COB), Green (SCV004VER) — so they coordinate with your livery\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTrack-Ready Engineering\u003c\/h2\u003e\u003cp\u003eLighTech produce their SCV004 bobbins from high-grade aluminium using precision CNC machining, the same process applied to their race-specification swingarm spools used by professional Superbike teams. The anodised finish resists the grime, tyre spray and mechanical abuse that a busy race weekend throws at paddock equipment, while the colour-coded range lets you build a cohesive, professional-looking pit setup without sacrificing a gram of performance.\u003c\/p\u003e\u003cp\u003eThe M8 thread interface is the definitive standard for the M1000RR K66 swingarm, and LighTech's bobbins are dimensioned to engage it cleanly and fully. Once fitted, the machined contact surface seats squarely against any V-fork stand, eliminating the wobble and slide risk associated with improvised lifting solutions. For trackday riders and race teams alike, that stability is not a luxury — it is a prerequisite for safe, efficient tyre changes, chain maintenance and pre-session checks.\u003c\/p\u003e\u003ch2\u003eGarage and Workshop Use\u003c\/h2\u003e\u003cp\u003eThe SCV004 bobbins are equally at home in a private garage. If you are maintaining your M1000RR at home and want a secure, damage-free way to lift the rear wheel for chain lubrication or rear tyre inspection, these bobbins provide exactly the same confidence off the circuit as on it. The compact, low-profile design means they remain fitted permanently without fouling bodywork or ground clearance.\u003c\/p\u003e\u003ch2\u003eImportant Compatibility Notice\u003c\/h2\u003e\u003cp\u003eThese bobbins are designed exclusively for swingarms fitted with M8 threaded inserts. They are not compatible with single-sided swingarms or any motorcycle that does not feature M8 threaded bores in the swingarm. Please verify your fitment before purchasing.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eBMW M1000RR K66 — model years 2021, 2022, 2023, 2024, 2025, 2026\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number (Black)\u003c\/td\u003e\n\u003ctd\u003eSCV004NER\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number (Red)\u003c\/td\u003e\n\u003ctd\u003eSCV004ROS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number (Silver)\u003c\/td\u003e\n\u003ctd\u003eSCV004SIL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number (Gold)\u003c\/td\u003e\n\u003ctd\u003eSCV004ORO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number (Cobalt)\u003c\/td\u003e\n\u003ctd\u003eSCV004COB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number (Green)\u003c\/td\u003e\n\u003ctd\u003eSCV004VER\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread size\u003c\/td\u003e\n\u003ctd\u003eM8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eCNC-machined aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStand compatibility\u003c\/td\u003e\n\u003ctd\u003eV-fork and roller paddock stands\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eDirect fitment to swingarm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupplied quantity\u003c\/td\u003e\n\u003ctd\u003e2 pieces (1 pair), including mounting hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eBMW M1000RR K66 (2021–2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"LighTech","offers":[{"title":"Red","offer_id":53168124559626,"sku":"SCV004ROS","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Gold","offer_id":53168124592394,"sku":"SCV004ORO","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Blue","offer_id":53168124625162,"sku":"SCV004COB","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Silver","offer_id":53168124657930,"sku":"SCV004SIL","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Black","offer_id":53168124690698,"sku":"SCV004NER","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Green","offer_id":53168124723466,"sku":"SCV004VER","price":24.63,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/SCV004NER_014ff108-c850-4142-b97a-d1e0b21bdaea.png?v=1780804268"},{"product_id":"standeraufnahme-lightech-ducati-panigale-v4-s-2025-scv004","title":"LighTech Bobbins Swingarm Spools M8 Ducati Panigale V4\/S\/R (2025-2026) SCV004","description":"\u003cp\u003eWhen the paddock clock is ticking and every second of tyre-warming time counts, the last thing you need is fiddling around with your rear stand. The LighTech SCV004 bobbins thread directly into the Ducati Panigale V4, V4S and V4R swingarm, giving you a rock-solid, scratch-free lift point that slots cleanly into any V-groove paddock stand — engineered for the demands of track preparation, not just workshop convenience.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDirect M8 thread fitment into the swingarm for a clean, rattle-free connection with zero play\u003c\/li\u003e\n\u003cli\u003eDesigned for V-groove roller stands — the most widely used paddock stand type at track days and race meetings\u003c\/li\u003e\n\u003cli\u003eCNC-machined aluminium construction delivers a precise fit and excellent resistance to workshop knocks and paddock wear\u003c\/li\u003e\n\u003cli\u003eAvailable in six anodised colours — Black, Red, Silver, Gold, Cobalt Blue and Green — to match or contrast your Panigale's livery\u003c\/li\u003e\n\u003cli\u003eSupplied as a pair including all mounting hardware, ready to fit straight from the box\u003c\/li\u003e\n\u003cli\u003eDedicated fitment for the 2025-2026 Panigale V4, V4S and V4R — no adaptation required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuilt for the Track, Perfect for the Workshop\u003c\/h2\u003e\u003cp\u003eLighTech manufacture the SCV004 from CNC-machined aluminium, a process that guarantees consistent tolerances and a finish that stands up to repeated stand lifts, transport straps and the general punishment of a busy paddock season. The anodised colour coat is not merely cosmetic — it provides a durable barrier against corrosion and surface marking, keeping the spools looking sharp round after round.\u003c\/p\u003e\u003cp\u003eThe M8 threaded design screws directly into the existing mounting points on the Panigale swingarm. There is no need for adapters or brackets, and because the spools seat fully flush against the swingarm, there is no risk of snagging on stands, straps or trolleys during transit. Each spool presents a clean cylindrical profile to the V-groove of the stand, distributing load evenly and preventing any lateral rocking that could unsettle a bike on a sloped or uneven pit-lane surface.\u003c\/p\u003e\u003ch2\u003eColour Options and Part Numbers\u003c\/h2\u003e\u003cp\u003eEach colour is available as a discrete part number, making it straightforward to order a replacement or a matching set across multiple bikes:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBlack — SCV004NER\u003c\/li\u003e\n\u003cli\u003eRed — SCV004ROS\u003c\/li\u003e\n\u003cli\u003eSilver — SCV004SIL\u003c\/li\u003e\n\u003cli\u003eGold — SCV004ORO\u003c\/li\u003e\n\u003cli\u003eCobalt Blue — SCV004COB\u003c\/li\u003e\n\u003cli\u003eGreen — SCV004VER\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eImportant Fitment Note\u003c\/h2\u003e\u003cp\u003eThese bobbins require M8 threaded holes in the swingarm. They are not suitable for single-sided swingarm configurations or for swingarms that do not have the appropriate mounting points. Please verify your specific variant before ordering.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale V4 — 2025, 2026\u003c\/li\u003e\n\u003cli\u003eDucati Panigale V4S — 2025, 2026\u003c\/li\u003e\n\u003cli\u003eDucati Panigale V4R — 2025, 2026\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eLighTech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number (base)\u003c\/td\u003e\n\u003ctd\u003eSCV004\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread size\u003c\/td\u003e\n\u003ctd\u003eM8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eCNC-machined aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eAnodised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStand compatibility\u003c\/td\u003e\n\u003ctd\u003eV-groove roller stands\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity supplied\u003c\/td\u003e\n\u003ctd\u003e2 spools (1 pair) including mounting bolts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eDucati Panigale V4 \/ V4S \/ V4R (2025-2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"LighTech","offers":[{"title":"Red","offer_id":53168125214986,"sku":"SCV004ROS","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Gold","offer_id":53168125247754,"sku":"SCV004ORO","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Cobalt Blue","offer_id":53168125280522,"sku":"SCV004COB","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Silver","offer_id":53168125313290,"sku":"SCV004SIL","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Black","offer_id":53168125346058,"sku":"SCV004NER","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Green","offer_id":53168125378826,"sku":"SCV004VER","price":24.63,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/SCV004NER_3012050e-2728-4aac-a68c-adac2a5cf451.png?v=1780804277"},{"product_id":"standeraufnahme-lightech-m8-honda-scv004","title":"LighTech M8 Bobbins for Honda CBR 1000 RR (2004–2019) – SCV004 Swingarm Stand Spools","description":"\u003cp\u003eMachined from solid aluminium to genuine racing-grade standards, the LighTech SCV004 bobbins bring pit-lane precision to your Fireblade. Whether you are prepping for a track day or carrying out routine maintenance at home, these M8 swingarm spools transform the chore of lifting your CBR 1000 RR into a smooth, secure, repeatable process.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCNC-machined aluminium construction — robust, genuinely lightweight, and finished to a standard you would expect on competition machinery\u003c\/li\u003e\n\u003cli\u003eDirect fit into the factory M8 threaded bosses on the swingarm — no adapters, no modifications, no compromise\u003c\/li\u003e\n\u003cli\u003eCompatible with all V-head paddock stands, roller lifts, rear racing stands and workshop lift tables\u003c\/li\u003e\n\u003cli\u003eCovers every CBR 1000 RR generation from 2004 to 2019, including SC57, SC59 and SC77 chassis codes\u003c\/li\u003e\n\u003cli\u003eSupplied as a complete pair with mounting bolts included — ready to fit straight from the box\u003c\/li\u003e\n\u003cli\u003eAvailable in six anodised colours: Black (SCV004NER), Red (SCV004ROS), Silver (SCV004SIL), Gold (SCV004ORO), Cobalt (SCV004COB) and Green (SCV004VER)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuilt to Race, Engineered to Last\u003c\/h2\u003e\u003cp\u003eLighTech have built their reputation on components that meet the demands of circuit racing, and the SCV004 spools are no exception. Each bobbin is machined from a single billet of aluminium — the same approach used for LighTech's competition-spec parts — so the structure is free from the porosity and inconsistency you can get with cast alternatives. The anodised finish is not merely cosmetic; it provides a hard, corrosion-resistant skin that holds its colour under repeated stand contact and exposure to chain lube, tyre dressing and general workshop grime.\u003c\/p\u003e\u003cp\u003eThe M8 thread form is cut cleanly into the body of each spool, ensuring a firm, rattle-free engagement with the Fireblade's swingarm mounting points. Once torqued down correctly using the supplied bolts, the spools sit flush and secure — there is no lateral movement when the V-head of a paddock stand locates against them.\u003c\/p\u003e\u003ch2\u003ePractical Versatility for Road and Track\u003c\/h2\u003e\u003cp\u003eFrom a quick pre-ride tyre pressure check to a full chain and sprocket service, or lifting the bike for a post-track-day inspection, the SCV004 bobbins support every scenario where you need the rear wheel off the ground. Their profile is shaped to seat correctly in the V-groove of standard paddock stands as well as the rollers of most workshop lifts, giving you flexibility in your equipment choices. The six colour options also make it easy to colour-coordinate with other LighTech accessories or simply add a discreet visual detail to the swingarm.\u003c\/p\u003e\u003ch2\u003eImportant Fitment Note\u003c\/h2\u003e\u003cp\u003eThese bobbins are designed exclusively for motorcycles with M8 threaded mounting points on a conventional double-sided swingarm. They are not suitable for single-sided swingarm designs or frames without threaded swingarm bosses. Always verify your model's swingarm specification before ordering.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHonda CBR 1000 RR — 2004 to 2019\u003c\/li\u003e\n\u003cli\u003eChassis codes: SC57 (2004–2007), SC59 (2008–2016), SC77 (2017–2019)\u003c\/li\u003e\n\u003cli\u003eThread size: M8\u003c\/li\u003e\n\u003cli\u003eNot compatible with single-sided swingarms or swingarms without threaded bosses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eColour Reference and Part Numbers\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBlack — SCV004NER\u003c\/li\u003e\n\u003cli\u003eRed — SCV004ROS\u003c\/li\u003e\n\u003cli\u003eSilver — SCV004SIL\u003c\/li\u003e\n\u003cli\u003eGold — SCV004ORO\u003c\/li\u003e\n\u003cli\u003eCobalt — SCV004COB\u003c\/li\u003e\n\u003cli\u003eGreen — SCV004VER\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: LighTech\u003c\/li\u003e\n\u003cli\u003ePart number family: SCV004\u003c\/li\u003e\n\u003cli\u003eThread size: M8\u003c\/li\u003e\n\u003cli\u003eMaterial: CNC-machined aluminium, anodised finish\u003c\/li\u003e\n\u003cli\u003eFitment: Honda CBR 1000 RR 2004–2019 (SC57, SC59, SC77)\u003c\/li\u003e\n\u003cli\u003eCompatible stand types: V-head paddock stands, roller lifts, rear racing stands\u003c\/li\u003e\n\u003cli\u003eSupplied quantity: 1 pair, including mounting bolts\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"Red","offer_id":53168125509898,"sku":"SCV004ROS","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Gold","offer_id":53168125542666,"sku":"SCV004ORO","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Blue","offer_id":53168125575434,"sku":"SCV004COB","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Silver","offer_id":53168125608202,"sku":"SCV004SIL","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Black","offer_id":53168125640970,"sku":"SCV004NER","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Green","offer_id":53168125673738,"sku":"SCV004VER","price":24.63,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/SCV004NER_ada844b4-c05d-4174-9164-401597594145.png?v=1780804281"},{"product_id":"standeraufnahme-lightech-m8-honda-sc82","title":"LighTech Bobbins Swingarm Spools M8 Honda CBR 1000 RR-R SC82 (2020-2026) SCV004","description":"\u003cp\u003eSculpted from CNC-machined aluminium and finished in a choice of race-inspired colours, the LighTech SCV004 bobbins bring Italian precision and genuine paddock pedigree to your Honda CBR 1000 RR-R Fireblade SC82. Whether you are preparing for a track day, carrying out a tyre change in the garage, or working through a service in the pits, these M8 swingarm spools deliver the secure, professional lift point your Fireblade deserves.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCNC-machined aluminium construction — lightweight yet exceptionally rigid, purpose-built for repeated stand use\u003c\/li\u003e\n\u003cli\u003eM8 thread screws directly into the swingarm mounting points — no adapters, no fuss, no modification required\u003c\/li\u003e\n\u003cli\u003eScratch-resistant contact surface provides a stable, damage-free seating point for all common paddock stands with V-head cradles\u003c\/li\u003e\n\u003cli\u003eCompatible with rear stands, racing stands, roller stands and V-cradle lifts across the full paddock-stand range\u003c\/li\u003e\n\u003cli\u003eAvailable in six anodised finishes — black (SCV004NER), red (SCV004ROS), silver (SCV004SIL), gold (SCV004ORO), cobalt (SCV004COB) and green (SCV004VER) — letting you match or contrast your Fireblade's livery\u003c\/li\u003e\n\u003cli\u003eSupplied as a pair with fixing bolts, ready to fit straight from the box\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign, Finish and Heritage\u003c\/h2\u003e\u003cp\u003eLighTech has spent decades supplying Italian race teams and demanding road riders with components that combine functional elegance with uncompromising engineering. The SCV004 carries that heritage forward: each spool is CNC-machined from billet aluminium to tight tolerances, then anodised in one of six distinct colours. The result is a component that looks as purposeful mounted on the swingarm as it does in the photograph — clean lines, a consistent finish, and no sharp edges to mark your paddock stand.\u003c\/p\u003e\u003cp\u003eThe colour palette is wide enough to complement virtually any Fireblade paint scheme. Choose the gold finish for a classic race-team aesthetic, opt for cobalt if your SC82 wears the iconic blue livery, or go understated with matte-effect black. Whichever finish you select, the anodising is durable enough to handle the repeated contact of a V-cradle stand season after season.\u003c\/p\u003e\u003ch2\u003ePerformance and Practicality\u003c\/h2\u003e\u003cp\u003eLifting a Fireblade safely and quickly matters whether you are chasing a sub-two-minute lap or simply swapping tyres on a Sunday afternoon. The SCV004 bobbins thread into the M8 swingarm bosses with nothing more than the included fixing bolts, creating a positive, wobble-free location point that makes solo lifting straightforward. The shaped profile keeps the stand centred and prevents the lateral slip that can occur with worn OEM spools or makeshift solutions. Stability translates directly into confidence — and confidence means faster turnarounds on the paddock.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThese bobbins are designed exclusively for Honda CBR 1000 RR-R Fireblade SC82 models from 2020 to 2026 that feature M8 threaded bosses in the swingarm. They are not compatible with single-sided swingarm configurations or with swingarms that do not have threaded mounting points. If you are unsure whether your specific model year has the required M8 bosses, check the swingarm before ordering.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHonda CBR 1000 RR-R Fireblade SC82 — model years 2020, 2021, 2022, 2023, 2024, 2025, 2026\u003c\/li\u003e\n\u003cli\u003eRequires M8 threaded swingarm bosses\u003c\/li\u003e\n\u003cli\u003eNot suitable for single-sided swingarms or unthreaded swingarms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eLighTech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eSCV004 (suffix by colour: NER \/ ROS \/ SIL \/ ORO \/ COB \/ VER)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread\u003c\/th\u003e\n\u003ctd\u003eM8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eCNC-machined aluminium, anodised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment\u003c\/th\u003e\n\u003ctd\u003eHonda CBR 1000 RR-R Fireblade SC82 (2020–2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStand Compatibility\u003c\/th\u003e\n\u003ctd\u003eRear stands, racing stands, roller stands, V-cradle lifts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eScope of Delivery\u003c\/th\u003e\n\u003ctd\u003e1 pair (2 pieces) including fixing bolts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"LighTech","offers":[{"title":"Red","offer_id":53168125706506,"sku":"SCV004ROS","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Gold","offer_id":53168125739274,"sku":"SCV004ORO","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Blue","offer_id":53168125772042,"sku":"SCV004COB","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Silver","offer_id":53168125804810,"sku":"SCV004SIL","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Black","offer_id":53168125837578,"sku":"SCV004NER","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Green","offer_id":53168125870346,"sku":"SCV004VER","price":24.63,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/SCV004NER_60d64e59-8e63-450a-b737-374dde6c0d02.png?v=1780804282"},{"product_id":"standeraufnahme-lightech-honda-cbr-600-rr","title":"LighTech Swingarm Bobbins M8 Honda CBR 600 RR (2003–2025) SCV004","description":"\u003cp\u003eLifting your CBR 600 RR should never be a compromise. LighTech's SCV004 bobbins thread directly into the swingarm's M8 mounting points, giving you a rock-solid, paint-free contact point that makes paddock stand work, tyre changes, and routine maintenance as effortless as possible — every single time you roll the bike onto the stand.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrecise M8 thread fitment screws directly into the swingarm — no adapters, no fuss, no damage to the swingarm finish\u003c\/li\u003e\n\u003cli\u003eCNC-machined aluminium construction delivers a high strength-to-weight ratio and a factory-quality finish\u003c\/li\u003e\n\u003cli\u003eV-notch compatible profile works with all standard paddock stands, racing rear lifts, and roller lifts used in workshop and pit-lane environments\u003c\/li\u003e\n\u003cli\u003eAvailable in six anodised colours — black (SCV004NER), red (SCV004ROS), silver (SCV004SIL), gold (SCV004ORO), cobalt (SCV004COB), and green (SCV004VER) — so you can match or contrast your CBR's livery\u003c\/li\u003e\n\u003cli\u003eSupplied as a complete pair with mounting bolts — ready to install straight out of the box\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eAll-Day Comfort in the Paddock and Workshop\u003c\/h2\u003e\u003cp\u003eWhether you are prepping the CBR 600 RR for a track day, swapping tyres between sessions, or simply carrying out a thorough chain and brake inspection at home, the SCV004 bobbins make the process genuinely comfortable. The machined aluminium surface sits cleanly in the stand's V-cradle, eliminating the rocking and repositioning that comes with makeshift solutions. Once fitted, they stay on the swingarm permanently, so every lift from that point on is immediate and stable — no hunting for the right jacking point, no risk of slipping off a fairing edge.\u003c\/p\u003e\u003ch2\u003eBuild Quality and Materials\u003c\/h2\u003e\u003cp\u003eLighTech manufactures the SCV004 from CNC-machined aluminium, the same process used throughout their racing accessory range. The close machining tolerances mean the M8 threads engage cleanly without cross-threading, and the anodised surface finish resists corrosion from chain lube, brake fluid, and road grime over the long term. Each colour variant carries its own part number suffix, so ordering a matched replacement is straightforward.\u003c\/p\u003e\u003ch3\u003eColour Variants and Part Numbers\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBlack — SCV004NER\u003c\/li\u003e\n\u003cli\u003eRed — SCV004ROS\u003c\/li\u003e\n\u003cli\u003eSilver — SCV004SIL\u003c\/li\u003e\n\u003cli\u003eGold — SCV004ORO\u003c\/li\u003e\n\u003cli\u003eCobalt — SCV004COB\u003c\/li\u003e\n\u003cli\u003eGreen — SCV004VER\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThe LighTech SCV004 bobbins are engineered specifically for the Honda CBR 600 RR across all model years from 2003 to 2025. Fitment requires existing M8 threaded bores in the swingarm. These bobbins are not compatible with single-sided swingarms or swingarms that do not feature M8 mounting threads. Please verify your swingarm specification before ordering.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: LighTech\u003c\/li\u003e\n\u003cli\u003ePart number: SCV004 (suffix varies by colour)\u003c\/li\u003e\n\u003cli\u003eThread size: M8\u003c\/li\u003e\n\u003cli\u003eMaterial: CNC-machined aluminium, anodised finish\u003c\/li\u003e\n\u003cli\u003eFitment: Honda CBR 600 RR, 2003–2025\u003c\/li\u003e\n\u003cli\u003eStand compatibility: V-notch paddock stands, racing rear lifts, roller lifts\u003c\/li\u003e\n\u003cli\u003eScope of delivery: 1 pair (2 bobbins) including mounting bolts\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"Red","offer_id":53168125903114,"sku":"SCV004ROS","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Gold","offer_id":53168125935882,"sku":"SCV004ORO","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Blue","offer_id":53168125968650,"sku":"SCV004COB","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Silver","offer_id":53168126001418,"sku":"SCV004SIL","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Black","offer_id":53168126034186,"sku":"SCV004NER","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Green","offer_id":53168126066954,"sku":"SCV004VER","price":24.63,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/SCV004NER_38f16ac3-3842-4d8c-9cab-2166efdabc77.png?v=1780804283"},{"product_id":"standeraufnahme-lightech-kawasaki-zx-4-rr","title":"LighTech Bobbins Swingarm Spools M8 – Kawasaki ZX-4 RR (2023–2026) SCV004","description":"\u003cp\u003eWhen every lift counts — in the pit lane or your home garage — the LighTech SCV004 swingarm spools give your Kawasaki ZX-4 RR a stable, secure, and scratch-free pickup point. Machined from high-grade aluminium via CNC and anodised in a choice of six colours, these bobbins are engineered to inspire confidence the moment they take the weight of your machine.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDirect M8 thread fitment: screws straight into the swingarm's existing threaded inserts — no drilling, no adapters, no compromise on rigidity.\u003c\/li\u003e\n\u003cli\u003eCompatible with V-fork paddock stands, racing stands, and roller-type rear stands, covering the most common pit and workshop lifting systems.\u003c\/li\u003e\n\u003cli\u003eSupplied as a pair with all mounting hardware included, so you are ready to lift from the moment the parcel arrives.\u003c\/li\u003e\n\u003cli\u003eCNC-milled aluminium construction offers a high strength-to-weight ratio and resists corrosion, keeping the spools looking sharp season after season.\u003c\/li\u003e\n\u003cli\u003eAvailable in six anodised finishes — black, red, silver, gold, cobalt blue, and green — letting you co-ordinate with the ZX-4 RR's livery or your own style.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuilt for Pit Lane and Workshop Alike\u003c\/h2\u003e\u003cp\u003eThe LighTech SCV004 bobbins thread securely into the swingarm, creating a fixed, repeatable lifting reference point each time you raise the rear of the ZX-4 RR. That consistency matters: an unstable rear stand is a genuine safety hazard, and a well-made spool eliminates the guesswork. The precision CNC machining ensures the thread engagement is clean and full, resisting any tendency to rock or shift under load. Whether you are changing rear tyres between sessions at the track, performing a chain and sprocket inspection at home, or loading the bike onto a transport cradle, the SCV004 makes the process faster and safer.\u003c\/p\u003e\u003ch2\u003eColour Options and Part Numbers\u003c\/h2\u003e\u003cp\u003eEach colour variant is a dedicated anodised finish, not a painted coating, meaning the colour is bonded into the surface of the aluminium for lasting durability. Select the finish that suits your build:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBlack – SCV004NER\u003c\/li\u003e\n\u003cli\u003eRed – SCV004ROS\u003c\/li\u003e\n\u003cli\u003eSilver – SCV004SIL\u003c\/li\u003e\n\u003cli\u003eGold – SCV004ORO\u003c\/li\u003e\n\u003cli\u003eCobalt – SCV004COB\u003c\/li\u003e\n\u003cli\u003eGreen – SCV004VER\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThese bobbins are designed exclusively for the Kawasaki ZX-4 RR, model years 2023 to 2026. They require M8 threaded inserts to be present in the swingarm. They are not suitable for single-sided swingarms or swingarms without threaded spool inserts. Before ordering, confirm that your ZX-4 RR's swingarm carries the correct M8 threaded bores.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: LighTech\u003c\/li\u003e\n\u003cli\u003ePart number family: SCV004\u003c\/li\u003e\n\u003cli\u003eThread size: M8 — direct swingarm mount\u003c\/li\u003e\n\u003cli\u003eMaterial: CNC-milled aluminium, anodised finish\u003c\/li\u003e\n\u003cli\u003eCompatible stand types: V-fork stands, racing stands, roller lifters\u003c\/li\u003e\n\u003cli\u003eFitment: Kawasaki ZX-4 RR (2023–2026)\u003c\/li\u003e\n\u003cli\u003eColours available: Black (SCV004NER), Red (SCV004ROS), Silver (SCV004SIL), Gold (SCV004ORO), Cobalt (SCV004COB), Green (SCV004VER)\u003c\/li\u003e\n\u003cli\u003eScope of delivery: 2 spools + mounting bolts\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"Red","offer_id":53168127017226,"sku":"SCV004ROS","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Gold","offer_id":53168127049994,"sku":"SCV004ORO","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Blue","offer_id":53168127082762,"sku":"SCV004COB","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Silver","offer_id":53168127115530,"sku":"SCV004SIL","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Black","offer_id":53168127148298,"sku":"SCV004NER","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Green","offer_id":53168127181066,"sku":"SCV004VER","price":24.63,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/SCV004NER_979aa0a9-f0b4-4ef5-bb66-fa6bf3f873ca.png?v=1780804291"},{"product_id":"standeraufnahme-lightech-m8-kawasaki-scv004","title":"LighTech Bobbins Swingarm Spools M8 for Kawasaki ZX-10 R\/RR (2011-2026) SCV004","description":"\u003cp\u003eEngineered for precision lifting in the pits and the paddock, the LighTech SCV004 swingarm spools deliver race-proven rigidity with direct M8 swingarm fitment — no adapters, no compromise, and a standard of construction trusted by professional teams worldwide. Available in six anodised colours, every pair ships ready to install on the Kawasaki ZX-10 R and ZX-10 RR across the full 2011–2026 production run.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCNC-machined aluminium construction combines a lightweight profile with the structural integrity demanded by race conditions — each spool resists deformation under repeated stand contact.\u003c\/li\u003e\n\u003cli\u003eDirect M8 thread engagement screws straight into the swingarm's existing threaded bosses, eliminating wobble and the risk of misaligned adapters during lifting.\u003c\/li\u003e\n\u003cli\u003eCompatible with roller stands, V-notch racing rear stands, and workshop assembly stands — a single purchase covers every scenario from tyre changes to chain maintenance.\u003c\/li\u003e\n\u003cli\u003eCovers the complete Kawasaki ZX-10 R and ZX-10 RR range (2011–2026), including specific model codes ZX1000J, ZX1000K, ZX1002R, and ZX1002RR.\u003c\/li\u003e\n\u003cli\u003eSupplied as a matched pair with high-tensile mounting bolts included — unbox, torque, and ride.\u003c\/li\u003e\n\u003cli\u003eSix precision anodised colour options — black, red, silver, gold, cobalt blue, and green — each with its own individual part number for exact reordering.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSecure by Design\u003c\/h2\u003e\u003cp\u003eThe reason professional workshops and track-day regulars specify LighTech spools comes down to a single principle: a motorcycle lifted on inadequate hardware is a liability. The SCV004 is CNC-machined from aluminium billet, meaning there are no casting voids or weak spots that could fail under load. The M8 thread interface distributes lifting forces directly into the swingarm structure rather than through a loose-fitting adapter, keeping the bike stable whether it is being worked on in a heated workshop or rolled off a van ramp at a circuit.\u003c\/p\u003e\u003cp\u003eNote: these spools require M8 threaded mounting points in the swingarm. They are not suitable for single-sided swingarm designs or for machines that lack dedicated spool mounting bosses. Always verify thread compatibility before fitment.\u003c\/p\u003e\u003ch2\u003eTrack, Workshop, and Transport Use\u003c\/h2\u003e\u003cp\u003eFrom chain lubrication runs between sessions to full wheel swaps in the garage, the SCV004 earns its place as a permanent fixture on the ZX-10 R rather than a piece of equipment installed and removed each time. Once torqued to specification, the spools remain in place for transport strapping points, V-stand paddock lifting, and workshop maintenance — a small investment that underpins every aspect of safe motorcycle preparation.\u003c\/p\u003e\u003ch2\u003eColour Options and Part Numbers\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBlack — SCV004NER\u003c\/li\u003e\n\u003cli\u003eRed — SCV004ROS\u003c\/li\u003e\n\u003cli\u003eSilver — SCV004SIL\u003c\/li\u003e\n\u003cli\u003eGold — SCV004ORO\u003c\/li\u003e\n\u003cli\u003eCobalt — SCV004COB\u003c\/li\u003e\n\u003cli\u003eGreen — SCV004VER\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eFits: Kawasaki ZX-10 R and ZX-10 RR, model years 2011 to 2026 (inclusive). Confirmed model codes: ZX1000J, ZX1000K, ZX1002R, ZX1002RR. M8 swingarm thread required. Not compatible with single-sided swingarms or swingarms without threaded spool bosses.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eLighTech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number (base)\u003c\/td\u003e\n\u003ctd\u003eSCV004\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread\u003c\/td\u003e\n\u003ctd\u003eM8 direct swingarm fitment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eCNC-machined aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eKawasaki ZX-10 R \/ ZX-10 RR (2011–2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible model codes\u003c\/td\u003e\n\u003ctd\u003eZX1000J, ZX1000K, ZX1002R, ZX1002RR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eScope of delivery\u003c\/td\u003e\n\u003ctd\u003e2 spools (1 pair) with high-tensile mounting bolts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailable colours\u003c\/td\u003e\n\u003ctd\u003eBlack, Red, Silver, Gold, Cobalt, Green\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"LighTech","offers":[{"title":"Red","offer_id":53168127443210,"sku":"SCV004ROS","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Gold","offer_id":53168127475978,"sku":"SCV004ORO","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Blue","offer_id":53168127508746,"sku":"SCV004COB","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Silver","offer_id":53168127541514,"sku":"SCV004SIL","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Black","offer_id":53168127574282,"sku":"SCV004NER","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Green","offer_id":53168127607050,"sku":"SCV004VER","price":24.63,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/SCV004NER_02d35bca-b866-4f2d-850f-32308e04c9f3.png?v=1780804294"},{"product_id":"standeraufnahme-lightech-kawasaki-zx-6-r","title":"LighTech Bobbins Swingarm Spools M8 – Kawasaki ZX-6R (2019-2026) SCV004","description":"\u003cp\u003eMachined from CNC-milled aluminium to racing tolerances, the LighTech SCV004 bobbins set a new benchmark for stand-up precision on the Kawasaki ZX-6R. Whether you are preparing for a track day or carrying out routine maintenance in the garage, these M8 swingarm spools give you a rock-solid, perfectly centred lift point every single time.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCNC-milled aluminium construction — exceptionally strong yet genuinely lightweight, with a finish that holds up lap after lap\u003c\/li\u003e\n\u003cli\u003eM8 thread screws directly into the factory-tapped points on the ZX-6R swingarm — no drilling, no adapters, no compromise\u003c\/li\u003e\n\u003cli\u003eCompatible with V-fork paddock stands, roller stands and transport stands, making workshop use and track-day prep effortless\u003c\/li\u003e\n\u003cli\u003eAvailable in six anodised colours — Black (SCV004NER), Red (SCV004ROS), Silver (SCV004SIL), Gold (SCV004ORO), Cobalt (SCV004COB) and Green (SCV004VER) — so you can match or contrast your ZX-6R's livery\u003c\/li\u003e\n\u003cli\u003eSupplied as a pair complete with mounting bolts — everything needed for a straight-to-swingarm fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Materials\u003c\/h2\u003e\u003cp\u003eLighTech's reputation is built on the same precision manufacturing processes used by factory race teams across Europe. The SCV004 bobbins are no exception. Each spool is turned from solid aluminium billet on CNC machines, then hard-anodised for corrosion resistance and a consistent, deep colour that does not fade or chip under regular use. The M8 threads are cut cleanly and to full tolerance, ensuring confident engagement with the swingarm without the risk of cross-threading that can plague cheaper pressed-pin alternatives.\u003c\/p\u003e\u003ch2\u003ePerformance and Practicality\u003c\/h2\u003e\u003cp\u003eRaising a supersport machine should never feel uncertain. The SCV004's flat-shouldered spool profile seats squarely against a V-fork stand's arms, eliminating the lateral movement that causes anxiety when working alone. The same geometry suits roller stands for static display or transport cradles used by professional teams — a single set of bobbins covers every scenario from trackside tyre changes to long-distance trailer transport.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThe LighTech SCV004 bobbins are designed exclusively for M8 threaded swingarm inserts. Please verify that your motorcycle has M8 threaded bores at the swingarm spool points before ordering. These bobbins are not suitable for single-sided swingarms or frames without factory-threaded spool points.\u003c\/p\u003e\u003cul\u003e\u003cli\u003eKawasaki ZX-6R (2019–2026)\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eLighTech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart numbers\u003c\/td\u003e\n\u003ctd\u003eSCV004NER \/ SCV004ROS \/ SCV004SIL \/ SCV004ORO \/ SCV004COB \/ SCV004VER\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread size\u003c\/td\u003e\n\u003ctd\u003eM8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eCNC-milled aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eKawasaki ZX-6R (2019–2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eScope of delivery\u003c\/td\u003e\n\u003ctd\u003e2 spools including mounting bolts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailable colours\u003c\/td\u003e\n\u003ctd\u003eBlack, Red, Silver, Gold, Cobalt, Green\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMount location\u003c\/td\u003e\n\u003ctd\u003eSwingarm (M8 threaded bores)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"LighTech","offers":[{"title":"Red","offer_id":53168127639818,"sku":"SCV004ROS","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Gold","offer_id":53168127672586,"sku":"SCV004ORO","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Blue","offer_id":53168127705354,"sku":"SCV004COB","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Silver","offer_id":53168127738122,"sku":"SCV004SIL","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Black","offer_id":53168127770890,"sku":"SCV004NER","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Green","offer_id":53168127803658,"sku":"SCV004VER","price":24.63,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/SCV004NER_c4641227-b6d9-457d-baeb-2c625116eafe.png?v=1780804294"},{"product_id":"standeraufnahme-lightech-m8-suzuki-gsx-r-1000","title":"LighTech Bobbins Swingarm Spools M8 Suzuki GSX-R 1000 (2005-2025) SCV004","description":"\u003cp\u003eFew workshop accessories combine Italian precision engineering with genuine aesthetic flair quite like the LighTech SCV004 bobbins. Machined from solid aluminium and finished in a rich anodised colour of your choice, these swingarm spools are as visually considered as they are functionally dependable — a fitting match for the GSX-R 1000's own performance pedigree across two decades of production.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCNC-machined aluminium construction delivers the strength and precision that LighTech is renowned for throughout the paddock.\u003c\/li\u003e\n\u003cli\u003eDirect M8 thread fitment into the swingarm — no adapters, no modification, no wasted time.\u003c\/li\u003e\n\u003cli\u003eCompatible with any standard V-head rear paddock stand, making workshop maintenance and track-day preparation effortless.\u003c\/li\u003e\n\u003cli\u003eAvailable in six anodised colour options, each with its own dedicated part number, so you can coordinate perfectly with your GSX-R's livery.\u003c\/li\u003e\n\u003cli\u003eSupplied as a complete set: two bobbins plus the appropriate mounting bolts, ready to fit straight out of the box.\u003c\/li\u003e\n\u003cli\u003eCovers the full GSX-R 1000 lineage from 2005 through to 2025, including K5, K7, L0, L2, L7 and Euro 5 variants from 2021 onwards.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign, Finish and Heritage\u003c\/h2\u003e\u003cp\u003eLighTech has been supplying race teams and discerning road riders since the brand's earliest days in Italian motorsport, and the SCV004 reflects exactly that lineage. The anodised finish is not merely decorative — it creates a durable oxide layer that resists corrosion and workshop scuffs in equal measure. Whether you choose the understated elegance of silver or the bold contrast of cobalt blue, the quality of the surface treatment is immediately apparent. These are components that belong on a machine taken seriously.\u003c\/p\u003e\u003ch2\u003ePerformance and Practicality\u003c\/h2\u003e\u003cp\u003eLifting a GSX-R 1000 should be a confident, repeatable procedure whether you are in a heated garage or a busy circuit paddock. The SCV004 bobbins thread directly into the swingarm's existing M8 threaded holes and seat with the positive engagement you need before a V-head stand takes the bike's full weight. There is no flex, no rattle and no compromise. Ideal for chain and tyre maintenance, suspension setup, pre-race preparation or safe motorcycle transport.\u003c\/p\u003e\u003cp\u003ePlease note: these bobbins require M8 threaded holes to be present in the swingarm. They are not suitable for single-sided swingarm configurations.\u003c\/p\u003e\u003ch2\u003eColour Options and Part Numbers\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBlack – SCV004NER\u003c\/li\u003e\n\u003cli\u003eRed – SCV004ROS\u003c\/li\u003e\n\u003cli\u003eSilver – SCV004SIL\u003c\/li\u003e\n\u003cli\u003eGold – SCV004ORO\u003c\/li\u003e\n\u003cli\u003eCobalt Blue – SCV004COB\u003c\/li\u003e\n\u003cli\u003eGreen – SCV004VER\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eDesigned and verified for the Suzuki GSX-R 1000 across the following generations:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSuzuki GSX-R 1000 K5 (2005–2006)\u003c\/li\u003e\n\u003cli\u003eSuzuki GSX-R 1000 K7 (2007–2008)\u003c\/li\u003e\n\u003cli\u003eSuzuki GSX-R 1000 L0 (2009–2011)\u003c\/li\u003e\n\u003cli\u003eSuzuki GSX-R 1000 L2 (2012–2016)\u003c\/li\u003e\n\u003cli\u003eSuzuki GSX-R 1000 L7 (2017–2020)\u003c\/li\u003e\n\u003cli\u003eSuzuki GSX-R 1000 Euro 5 (2021–2025)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: LighTech\u003c\/li\u003e\n\u003cli\u003ePart number: SCV004 (colour suffix varies)\u003c\/li\u003e\n\u003cli\u003eThread size: M8\u003c\/li\u003e\n\u003cli\u003eMaterial: CNC-machined aluminium, anodised\u003c\/li\u003e\n\u003cli\u003eStand compatibility: V-head rear paddock stand\u003c\/li\u003e\n\u003cli\u003eFitment: Suzuki GSX-R 1000 (2005–2025)\u003c\/li\u003e\n\u003cli\u003eScope of delivery: 2x bobbins + mounting bolts\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"Red","offer_id":53168127901962,"sku":"SCV004ROS","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Gold","offer_id":53168127934730,"sku":"SCV004ORO","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Blue","offer_id":53168127967498,"sku":"SCV004COB","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Silver","offer_id":53168128000266,"sku":"SCV004SIL","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Black","offer_id":53168128033034,"sku":"SCV004NER","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Green","offer_id":53168128065802,"sku":"SCV004VER","price":24.63,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/SCV004NER_fd0046d3-eaa5-48df-b1c1-10628187e759.png?v=1780804297"},{"product_id":"standeraufnahme-lightech-m8-triumph-street-triple-765-scv004","title":"LighTech Bobbins M8 Swingarm Spools – Triumph Street Triple 765 S \/ R \/ RS (2017–2026) SCV004","description":"\u003cp\u003eDesigned specifically for the Triumph Street Triple 765, the LighTech SCV004 swingarm spools make every maintenance session smoother and more secure — whether you are doing a quick chain clean in your garage, swapping tyres before a track day, or loading the bike for transport. CNC-machined from aircraft-grade aluminium and anodised in a range of sharp colours, these M8 bobbins bolt directly to the swingarm without any modification, giving you a solid, rattle-free lifting point every time you reach for the paddock stand.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDirect swingarm fitment for the Triumph Street Triple 765 S, R and RS (2017–2026) — no drilling, no adapters required\u003c\/li\u003e\n\u003cli\u003eM8 thread specification machined to tight tolerances for secure, wobble-free engagement every lift\u003c\/li\u003e\n\u003cli\u003eCNC-machined aluminium construction keeps weight minimal while delivering the rigidity needed for safe, repeated use\u003c\/li\u003e\n\u003cli\u003eCompatible with all standard V-head paddock stands, roller stands and race stands with a V-slot\u003c\/li\u003e\n\u003cli\u003eSupplied as a pair with mounting bolts — everything you need is in the box\u003c\/li\u003e\n\u003cli\u003eAvailable in six anodised finishes: black, red, silver, gold, blue and green to complement your Street Triple's livery\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePurpose-Built for the Street Triple 765\u003c\/h2\u003e\u003cp\u003eLighTech engineered the SCV004 from the ground up for the Street Triple 765 platform. The thread pitch, body diameter and shoulder geometry are all matched to the swingarm's existing M8 threaded bosses, so installation takes minutes with basic hand tools. Once fitted, the spools sit flush and secure, protecting the swingarm itself from scratches and dents that bare-metal stand contact causes over time.\u003c\/p\u003e\u003cp\u003eThe anodised finish is not just cosmetic — it forms a hard, corrosion-resistant layer that stands up to chain lube, brake fluid splashes and road grime through years of regular use. Each colour variant carries its own LighTech part number, making re-ordering or colour-matching to other LighTech accessories straightforward.\u003c\/p\u003e\u003ch2\u003eTrack Day and Workshop Ready\u003c\/h2\u003e\u003cp\u003eWhether you are maintaining chain tension and lubrication at home, conducting a full tyre swap before a circuit session, or handing the bike over to a race mechanic in the paddock, having a dedicated spool mounting point is the difference between a confident lift and an anxious one. The SCV004 spools grip a V-head stand cleanly, with no lateral movement that could let the bike slip during a critical moment.\u003c\/p\u003e\u003cp\u003eNote: these spools are intended for motorcycles with M8 threaded mounting points in the swingarm. They are not suitable for single-sided swingarms or models without the corresponding mounting bosses.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThe LighTech SCV004 swingarm spools are compatible with the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTriumph Street Triple 765 S (2017–2026)\u003c\/li\u003e\n\u003cli\u003eTriumph Street Triple 765 R (2017–2026)\u003c\/li\u003e\n\u003cli\u003eTriumph Street Triple 765 RS (2017–2026)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eColour Variants and Part Numbers\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBlack – SCV004NER\u003c\/li\u003e\n\u003cli\u003eRed – SCV004ROS\u003c\/li\u003e\n\u003cli\u003eSilver – SCV004SIL\u003c\/li\u003e\n\u003cli\u003eGold – SCV004ORO\u003c\/li\u003e\n\u003cli\u003eBlue (Cobalt) – SCV004COB\u003c\/li\u003e\n\u003cli\u003eGreen – SCV004VER\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: LighTech\u003c\/li\u003e\n\u003cli\u003ePart number family: SCV004\u003c\/li\u003e\n\u003cli\u003eThread type: M8\u003c\/li\u003e\n\u003cli\u003eMaterial: CNC-machined aluminium, anodised\u003c\/li\u003e\n\u003cli\u003eCompatible stand types: V-head paddock stands, roller stands, racing stands\u003c\/li\u003e\n\u003cli\u003eFitment: Triumph Street Triple 765 S \/ R \/ RS, 2017–2026\u003c\/li\u003e\n\u003cli\u003eQuantity: 1 pair (2 spools) including mounting bolts\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"Red","offer_id":53168128885002,"sku":"SCV004ROS","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Gold","offer_id":53168128917770,"sku":"SCV004ORO","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Blue","offer_id":53168128950538,"sku":"SCV004COB","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Silver","offer_id":53168128983306,"sku":"SCV004SIL","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Black","offer_id":53168129016074,"sku":"SCV004NER","price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Green","offer_id":53168129048842,"sku":"SCV004VER","price":24.63,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/SCV004NER_de23e2fc-66ec-46a5-ae0e-0f81e1348f90.png?v=1780804307"},{"product_id":"bobbins-blozen-standeraufnahme-lightech-scv005","title":"LighTech Bobbins SCV005 M10x1.25 Swingarm Spools for Kawasaki ZX-636 Ninja (2022–2026)","description":"\u003cp\u003eWhen every second in the pit lane counts, you need bobbins that go on fast, hold firm under a laden race stand, and come off without drama. The LighTech SCV005 delivers exactly that for the Kawasaki ZX-636 Ninja (2022–2026) — CNC-machined aluminium spools with a precise M10 x 1.25 fine thread that engages directly with the swingarm's factory threaded inserts, no adapters, no guesswork.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrecision M10 x 1.25 fine thread machined to tight tolerances for a rattle-free, positive engagement with the ZX-636 swingarm\u003c\/li\u003e\n\u003cli\u003eCNC-milled aluminium construction keeps weight to a minimum without compromising the load-bearing strength needed on a race stand\u003c\/li\u003e\n\u003cli\u003eV-notch geometry is fully compatible with paddock stands, racing lifts and roller stands used at circuit and track days\u003c\/li\u003e\n\u003cli\u003eAvailable in six anodised finishes — black (SCV005NER), red (SCV005ROS), silver (SCV005SIL), gold (SCV005ORO), cobalt blue (SCV005COB) and green (SCV005VER) — so you can colour-match your Ninja's livery\u003c\/li\u003e\n\u003cli\u003eSupplied as a pair complete with fitting bolts, ready to install straight from the box\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuilt for the Track, Useful in the Garage\u003c\/h2\u003e\u003cp\u003eWhether you are prepping your ZX-636 for a trackday, bleeding brakes on a race weekend, or simply cleaning the rear wheel in the paddock, secure and repeatable stand support is non-negotiable. LighTech engineered the SCV005 to handle the repeated lift-and-lower cycles that a serious race programme demands. The anodised finish resists fuel and fluid contact, and the machined V-profile sits cleanly in any standard stand head without rocking or shifting during rear wheel removal.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThe SCV005 bobbins are purpose-designed for the Kawasaki ZX-636 Ninja manufactured between 2022 and 2026. They thread directly into the dedicated threaded holes in the swingarm. These bobbins are not suitable for motorcycles with a single-sided swingarm or for models that do not have factory threaded swingarm inserts. Always verify your model variant before ordering.\u003c\/p\u003e\u003ch2\u003eColour Variants and Part Numbers\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBlack — SCV005NER\u003c\/li\u003e\n\u003cli\u003eRed — SCV005ROS\u003c\/li\u003e\n\u003cli\u003eSilver — SCV005SIL\u003c\/li\u003e\n\u003cli\u003eGold — SCV005ORO\u003c\/li\u003e\n\u003cli\u003eCobalt Blue — SCV005COB\u003c\/li\u003e\n\u003cli\u003eGreen — SCV005VER\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eLighTech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number (base)\u003c\/td\u003e\n\u003ctd\u003eSCV005\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eKawasaki ZX-636 Ninja (2022–2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread type\u003c\/td\u003e\n\u003ctd\u003eM10 x 1.25 fine thread\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eCNC-milled aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStand compatibility\u003c\/td\u003e\n\u003ctd\u003eV-head paddock stands, racing lifts, roller stands\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eScope of delivery\u003c\/td\u003e\n\u003ctd\u003e2 bobbins including fitting bolts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"LighTech","offers":[{"title":"Red","offer_id":53168129081610,"sku":null,"price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Gold","offer_id":53168129114378,"sku":null,"price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Blue","offer_id":53168129147146,"sku":null,"price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Silver","offer_id":53168129179914,"sku":null,"price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Black","offer_id":53168129212682,"sku":null,"price":24.63,"currency_code":"EUR","in_stock":false},{"title":"Green","offer_id":53168129245450,"sku":null,"price":24.63,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/SCV004NER_bae082e2-d65b-49b4-952f-f35074259cd2.png?v=1780804308"},{"product_id":"bobbins-blozen-standeraufnahme-bonamici-racing-yamaha-yzf-r9-25-26-scr6","title":"Bonamici Racing SCR6 Swingarm Spools for Yamaha YZF-R9 (2025-2026)","description":"\u003cp\u003ePrecision-crafted in Italy and finished with Bonamici Racing's signature attention to detail, the SCR6 swingarm spools bring genuine paddock heritage to your Yamaha YZF-R9. Machined from solid aluminium and available in a range of anodised colours, they deliver a clean, purposeful aesthetic alongside the structural integrity that workshop stands and track-day paddocks demand.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCNC-machined from a single billet of aluminium for exceptional strength, precise tolerances and a weight-to-rigidity ratio that mass-produced alternatives cannot match.\u003c\/li\u003e\n\u003cli\u003eAvailable in eight anodised colour options — black, red, blue, gold, orange, silver, bronze and green — so the spools can complement or contrast your YZF-R9's livery rather than disappear beneath it.\u003c\/li\u003e\n\u003cli\u003eDesigned specifically for the factory swingarm pick-up points of the 2025-2026 Yamaha YZF-R9, ensuring a flush, rattle-free fit with no modification required.\u003c\/li\u003e\n\u003cli\u003eProtect the swingarm from the scuffs, dents and pressure marks that direct stand contact causes, preserving the finish and resale value of the chassis.\u003c\/li\u003e\n\u003cli\u003eSupplied as a complete set — left, right and fixings included — so the bike is ready to be lifted the moment the parcel arrives.\u003c\/li\u003e\n\u003cli\u003eMade in Italy by Bonamici Racing, a marque synonymous with CNC performance components developed at the highest levels of motorcycle competition.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign, Finish and Heritage\u003c\/h2\u003e\u003cp\u003eBonamici Racing has built its reputation supplying CNC components to World Superbike and Supersport teams, and the SCR6 carries that lineage into an accessible accessory. Each spool is turned and milled from solid aluminium stock, then hard-anodised to a consistent, durable finish. The process penetrates the surface rather than sitting on top of it, which means the colour resists chipping and corrosion through repeated stand use and seasonal exposure. The result is a component that looks as considered as the rest of the YZF-R9's specification — not an afterthought bolted to the swingarm.\u003c\/p\u003e\u003ch2\u003ePerformance and Practicality\u003c\/h2\u003e\u003cp\u003eAt their core, swingarm spools exist to make lifting the rear wheel safe, stable and repeatable. The SCR6 achieves this by presenting a positive, correctly profiled seating surface to paddock stands and workshop lifts alike. The aluminium construction keeps mass negligible, and because the spools thread directly into the swingarm's existing threaded bosses, installation requires no drilling, tapping or bracket fabrication. Tighten to the correct torque using the supplied fastener and the spools are ready for service. The geometry is calculated for the 2025-2026 YZF-R9 specifically, so stand hooks locate without rocking — a detail that matters when the bike is fully laden with fuel and fairings.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThe Bonamici Racing SCR6 swingarm spools are engineered exclusively for the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eYamaha YZF-R9 — model years 2025 and 2026\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThey mount directly to the factory-threaded swingarm pick-up points. No adaptors or additional hardware beyond the included bolt are needed. Always observe the manufacturer's recommended torque setting to guarantee safe and secure retention under load.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eSCR6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eBonamici Racing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eCNC-machined aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurface finish\u003c\/td\u003e\n\u003ctd\u003eHard anodised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eYamaha YZF-R9 (2025-2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eRear-stand swingarm spools\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eScope of delivery\u003c\/td\u003e\n\u003ctd\u003e1x set (left + right, including bolt)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Bonamici Racing","offers":[{"title":"Black","offer_id":53168566567178,"sku":"SCR6_BK","price":76.16,"currency_code":"EUR","in_stock":false},{"title":"Red","offer_id":53168566599946,"sku":"SCR6_RE","price":76.16,"currency_code":"EUR","in_stock":false},{"title":"Blue","offer_id":53168566632714,"sku":"SCR6_BL","price":76.16,"currency_code":"EUR","in_stock":false},{"title":"Gold","offer_id":53168566665482,"sku":"SCR6_GO","price":76.16,"currency_code":"EUR","in_stock":false},{"title":"Orange","offer_id":53168566698250,"sku":"SCR6_OR","price":76.16,"currency_code":"EUR","in_stock":false},{"title":"Silver","offer_id":53168566731018,"sku":"SCR6_SI","price":76.16,"currency_code":"EUR","in_stock":false},{"title":"Bronze","offer_id":53168566763786,"sku":"SCR6_BR","price":76.16,"currency_code":"EUR","in_stock":false},{"title":"Green","offer_id":53168566796554,"sku":"SCR6_GR","price":76.16,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/16_07172455-6805-4e43-8a18-b6e46fc31a00.png?v=1780808811"},{"product_id":"schwingenabdeckung-carbon-lightech-kawasaki-cark9560","title":"LighTech Carbon Swingarm Cover for Kawasaki ZX-6R \/ 636 \/ RR (2009–2026) – CARK9560","description":"\u003cp\u003eA straightforward, high-impact upgrade for everyday riders and weekend trackday enthusiasts alike, the LighTech CARK9560 carbon swingarm cover slots directly onto the Kawasaki ZX-6R, ZX-636, and RR in place of the standard plastic piece — delivering a genuine improvement in appearance and durability without any complexity or compromise.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eLightweight carbon construction reduces unsprung mass compared to the OEM plastic cover, contributing to sharper handling over time.\u003c\/li\u003e\n\u003cli\u003eGlossy carbon finish presents an aggressive, purposeful aesthetic that complements the ZX-6R's factory livery without looking aftermarket-crude.\u003c\/li\u003e\n\u003cli\u003eExceptionally resistant to road debris, fuel, oil, and UV exposure — the gloss surface holds its depth far longer than painted plastic.\u003c\/li\u003e\n\u003cli\u003eSimple installation: depending on the exact model year, the cover mounts using the supplied bolts or a small amount of silicone adhesive — no specialist tools required.\u003c\/li\u003e\n\u003cli\u003eMaintenance is effortless — a neutral household cleaner is all that's needed to keep the high-gloss surface looking factory-fresh.\u003c\/li\u003e\n\u003cli\u003eDirect OEM replacement fitment ensures no modifications to the swingarm are necessary.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEveryday Usability and Long-Term Value\u003c\/h2\u003e\u003cp\u003eUnlike purely cosmetic bolt-ons that demand constant upkeep, this LighTech cover is built around practical ownership. The gloss carbon weave shrugs off the kind of muck, chain lube overspray, and kerb rash that quickly degrades standard covers. Cleaning takes a minute rather than a weekend, and the part won't fade or crack under prolonged sun exposure. For riders who want their ZX-6R to look its best on the morning commute just as much as at a Sunday trackday, that balance of low maintenance and high visual reward makes real sense.\u003c\/p\u003e\u003ch2\u003eBuild Quality\u003c\/h2\u003e\u003cp\u003eLighTech's carbon components are produced using aerospace-grade woven carbon fibre laid up under controlled conditions, then finished to a uniform gloss lacquer that protects the weave and gives the part its clean, deep appearance. The result is a cover that is meaningfully lighter and stiffer than the component it replaces, without any of the brittleness associated with budget carbon alternatives.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis swingarm cover is designed and tested to fit the following Kawasaki models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKawasaki ZX-6R – 2009 to 2026\u003c\/li\u003e\n\u003cli\u003eKawasaki ZX-636 – 2009 to 2026\u003c\/li\u003e\n\u003cli\u003eKawasaki ZX-6RR – 2009 to 2026\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eInstallation method varies slightly by model year — refer to the fitting instructions included with the part. No permanent modification to the swingarm is required.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: LighTech\u003c\/li\u003e\n\u003cli\u003ePart number: CARK9560\u003c\/li\u003e\n\u003cli\u003eMaterial: woven carbon fibre\u003c\/li\u003e\n\u003cli\u003eFinish: glossy\u003c\/li\u003e\n\u003cli\u003eFitment: Kawasaki ZX-6R \/ ZX-636 \/ ZX-6RR, 2009–2026\u003c\/li\u003e\n\u003cli\u003eQuantity: 1 piece\u003c\/li\u003e\n\u003cli\u003eInstallation: supplied bolts or silicone adhesive (model dependent)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"Default Title","offer_id":53168711565578,"sku":"CARK9560","price":270.96,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/CARK9560.png?v=1780811998"},{"product_id":"febur-fe1401","title":"Febur Racing Aluminium Swingarm for Kawasaki ZX-10 R\/RR (2021-2026) FE1401","description":"\u003cp\u003eDeveloped in direct collaboration with the World Superbike Championship, the Febur FE1401 racing aluminium swingarm is built for one purpose: extracting every tenth of a second from the Kawasaki ZX-10 R and ZX-10 RR on track. At just 6.7 kg and constructed entirely from high-grade aluminium, it delivers a meaningful reduction in unsprung mass without any compromise to torsional rigidity or structural integrity.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRace-weight construction: at 6.7 kg, this 100% aluminium swingarm cuts unsprung mass to sharpen turn-in response and rear-end feedback under hard acceleration.\u003c\/li\u003e\n\u003cli\u003eWSBK co-developed geometry: the design brief came straight from WorldSBK competition, ensuring the dimensional and dynamic requirements of professional-level racing are fully met.\u003c\/li\u003e\n\u003cli\u003eComplete installation kit: the set includes chain tensioners, an OEM wheel bush, a speed sensor bracket and a brake caliper bracket — everything needed to bolt up without hunting for ancillary parts.\u003c\/li\u003e\n\u003cli\u003eRacing wheel configuration (28 mm pin): full assembly with chain tensioner sliders, 28 mm axle pin, nut and brake caliper bracket included for dedicated race-wheel setups.\u003c\/li\u003e\n\u003cli\u003eOEM wheel configuration (25 mm pin): alternative bush for the standard wheel, supplied with chain tensioner sliders, speed sensor bracket and brake caliper bracket for road-to-track builds.\u003c\/li\u003e\n\u003cli\u003ePrecise fitment: engineered specifically for the 2021-2026 Kawasaki ZX-10 R and ZX-10 RR — a direct, confidence-inspiring swap for the factory unit.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuilt for the Track, Tested at the Top\u003c\/h2\u003e\u003cp\u003eThe FE1401 swingarm is not an aftermarket approximation of a race part — it is the race part. Febur invested its engineering resource alongside WSBK teams to arrive at a geometry and wall-thickness specification that survives the sustained punishment of superbike competition. The result is a component that handles the torque peaks and kerb-strike loads of circuit riding without the weight penalty of a stock cast-aluminium piece.\u003c\/p\u003e\u003cp\u003eTwo axle configurations are catered for within the kit. Riders running dedicated racing wheels with a 28 mm rear axle pin will find all required hardware included: tensioner sliders, the 28 mm pin, a locking nut and a caliper bracket. Those retaining the original Kawasaki wheel can fit the supplied OEM-compatible 25 mm pin bush alongside the tensioner sliders, speed sensor bracket and caliper bracket. Note that the original Kawasaki brake caliper is not compatible with either configuration — a racing or aftermarket caliper is required.\u003c\/p\u003e\u003ch2\u003ePerformance Advantage\u003c\/h2\u003e\u003cp\u003eReducing unsprung and rotational mass at the rear axle has a disproportionately large effect on how a superbike feels and behaves. With the FE1401 fitted, the ZX-10 R\/RR responds more crisply to suspension adjustments, exhibits cleaner rear-end stability under braking and accelerates out of corners with less rotational inertia working against the drivetrain. For riders pushing towards lap-time gains, this is one of the most mechanically direct improvements available.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis swingarm is designed exclusively for the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKawasaki ZX-10 R — model years 2021, 2022, 2023, 2024, 2025, 2026\u003c\/li\u003e\n\u003cli\u003eKawasaki ZX-10 RR — model years 2021, 2022, 2023, 2024, 2025, 2026\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eImportant: the original Kawasaki brake caliper is not compatible with this swingarm. An aftermarket or racing brake caliper must be used. Verify axle pin diameter against your wheel choice before ordering.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart number: FE1401\u003c\/li\u003e\n\u003cli\u003eBrand: Febur\u003c\/li\u003e\n\u003cli\u003eMaterial: 100% aluminium\u003c\/li\u003e\n\u003cli\u003eWeight: 6.7 kg\u003c\/li\u003e\n\u003cli\u003eRear axle pin options: 28 mm (racing wheel) \/ 25 mm (OEM wheel)\u003c\/li\u003e\n\u003cli\u003eDevelopment programme: WSBK (World Superbike Championship)\u003c\/li\u003e\n\u003cli\u003eFitment: Kawasaki ZX-10 R \/ ZX-10 RR, 2021-2026\u003c\/li\u003e\n\u003cli\u003eIntended use: track \/ racing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Febur","offers":[{"title":"Default Title","offer_id":53168786112778,"sku":"FE1401","price":5295.5,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/FE1401.png?v=1780815086"}],"url":"https:\/\/inter-pace.com\/ar-qa\/collections\/swingarms.oembed","provider":"Inter-Pace","version":"1.0","type":"link"}